| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 7ddacfa564870cdd97275fd87decb6174abc6380 ]
Preethi reported that PMTU discovery for UDP/raw applications is not
working in the presence of VRF when the socket is not bound to a device.
The problem is that ip6_sk_update_pmtu does not consider the L3 domain
of the skb device if the socket is not bound. Update the function to
set oif to the L3 master device if relevant.
Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack")
Reported-by: Preethi Ramachandra <preethir@juniper.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 33d9a2c72f086cbf1087b2fd2d1a15aa9df14a7f ]
eth_type_trans() assumes initial value for skb->pkt_type
is PACKET_HOST.
This is indeed the value right after a fresh skb allocation.
However, it is possible that GRO merged a packet with a different
value (like PACKET_OTHERHOST in case macvlan is used), so
we need to make sure napi->skb will have pkt_type set back to
PACKET_HOST.
Otherwise, valid packets might be dropped by the stack because
their pkt_type is not PACKET_HOST.
napi_reuse_skb() was added in commit 96e93eab2033 ("gro: Add
internal interfaces for VLAN"), but this bug always has
been there.
Fixes: 96e93eab2033 ("gro: Add internal interfaces for VLAN")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 16f7eb2b77b55da816c4e207f3f9440a8cafc00a ]
The various types of tunnels running over IPv4 can ask to set the DF
bit to do PMTU discovery. However, PMTU discovery is subject to the
threshold set by the net.ipv4.route.min_pmtu sysctl, and is also
disabled on routes with "mtu lock". In those cases, we shouldn't set
the DF bit.
This patch makes setting the DF bit conditional on the route's MTU
locking state.
This issue seems to be older than git history.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 62230715fd2453b3ba948c9d83cfb3ada9169169 ]
Only first fragment has the sport/dport information,
not the following ones.
If we want consistent hash for all fragments, we need to
ignore ports even for first fragment.
This bug is visible for IPv6 traffic, if incoming fragments
do not have a flow label, since skb_get_hash() will give
different results for first fragment and following ones.
It is also visible if any routing rule wants dissection
and sport or dport.
See commit 5e5d6fed3741 ("ipv6: route: dissect flow
in input path if fib rules need it") for details.
[edumazet] rewrote the changelog completely.
Fixes: 06635a35d13d ("flow_dissect: use programable dissector in skb_flow_dissect and friends")
Signed-off-by: 배석진 <soukjin.bae@samsung.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d7a5bcb67c70cbc904057ef52d3fcfeb24420bb upstream.
When truncating the encode buffer, the page_ptr is getting
advanced, causing the next page to be skipped while encoding.
The page is still included in the response, so the response
contains a page of bogus data.
We need to adjust the page_ptr backwards to ensure we encode
the next page into the correct place.
We saw this triggered when concurrent directory modifications caused
nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting
call to xdr_truncate_encode() corrupted the READDIR reply.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 62e3941776fea8678bb8120607039410b1b61a65 ]
p9stat_free is more of a cleanup function than a 'free' function as it
only frees the content of the struct; there are chances of use-after-free
if it is improperly used (e.g. p9stat_free called twice as it used to be
possible to)
Clearing dangling pointers makes the function idempotent and safer to use.
Link: http://lkml.kernel.org/r/1535410108-20650-2-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bb6ad5572c0022e17e846b382d7413cdcf8055be upstream.
In call_xpt_users(), we delete the entry from the list, but we
do not reinitialise it. This triggers the list poisoning when
we later call unregister_xpt_user() in nfsd4_del_conns().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 076ed3da0c9b2f88d9157dbe7044a45641ae369e upstream.
commit 40413955ee26 ("Cipso: cipso_v4_optptr enter infinite loop") fixed
a possible infinite loop in the IP option parsing of CIPSO. The fix
assumes that ip_options_compile filtered out all zero length options and
that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist.
While this assumption currently holds true, add explicit checks for zero
length and invalid length options to be safe for the future. Even though
ip_options_compile should have validated the options, the introduction of
new one-byte options can still confuse this code without the additional
checks.
Signed-off-by: Stefan Nuernberger <snu@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Simon Veith <sveith@amazon.de>
Cc: stable@vger.kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 94d7ee0baa8b764cf64ad91ed69464c1a6a0066b upstream.
The code following l2tp_tunnel_find() expects that a new reference is
held on sk. Either sk_receive_skb() or the discard_put error path will
drop a reference from the tunnel's socket.
This issue exists in both l2tp_ip and l2tp_ip6.
Fixes: a3c18422a4b4 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit da71577545a52be3e0e9225a946e5fd79cfab015 ]
When an FDB entry is configured, the address is validated to have the
length of an Ethernet address, but the device for which the address is
configured can be of any type.
The above can result in the use of uninitialized memory when the address
is later compared against existing addresses since 'dev->addr_len' is
used and it may be greater than ETH_ALEN, as with ip6tnl devices.
Fix this by making sure that FDB entries are only configured for
Ethernet devices.
BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863
CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x14b/0x190 lib/dump_stack.c:113
kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956
__msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645
memcmp+0x11d/0x180 lib/string.c:863
dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464
ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline]
rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558
rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715
netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
__sys_sendmsg net/socket.c:2152 [inline]
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440ee9
Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0
R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181
kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2718 [inline]
__kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:996 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
__sys_sendmsg net/socket.c:2152 [inline]
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
v2:
* Make error message more specific (David)
Fixes: 090096bf3db1 ("net: generic fdb support for drivers without ndo_fdb_<op>")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7de414a9dd91426318df7b63da024b2b07e53df5 ]
Most callers of pskb_trim_rcsum() simply drop the skb when
it fails, however, ip_check_defrag() still continues to pass
the skb up to stack. This is suspicious.
In ip_check_defrag(), after we learn the skb is an IP fragment,
passing the skb to callers makes no sense, because callers expect
fragments are defrag'ed on success. So, dropping the skb when we
can't defrag it is reasonable.
Note, prior to commit 88078d98d1bb, this is not a big problem as
checksum will be fixed up anyway. After it, the checksum is not
correct on failure.
Found this during code review.
Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b336decab22158937975293aea79396525f92bb3 ]
syzbot reported an use-after-free involving sctp_id2asoc. Dmitry Vyukov
helped to root cause it and it is because of reading the asoc after it
was freed:
CPU 1 CPU 2
(working on socket 1) (working on socket 2)
sctp_association_destroy
sctp_id2asoc
spin lock
grab the asoc from idr
spin unlock
spin lock
remove asoc from idr
spin unlock
free(asoc)
if asoc->base.sk != sk ... [*]
This can only be hit if trying to fetch asocs from different sockets. As
we have a single IDR for all asocs, in all SCTP sockets, their id is
unique on the system. An application can try to send stuff on an id
that matches on another socket, and the if in [*] will protect from such
usage. But it didn't consider that as that asoc may belong to another
socket, it may be freed in parallel (read: under another socket lock).
We fix it by moving the checks in [*] into the protected region. This
fixes it because the asoc cannot be freed while the lock is held.
Reported-by: syzbot+c7dd55d7aec49d48e49a@syzkaller.appspotmail.com
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b6168562c8ce2bd5a30e213021650422e08764dc ]
In ethtool_ioctl(), the ioctl command 'ethcmd' is checked through a switch
statement to see whether it is necessary to pre-process the ethtool
structure, because, as mentioned in the comment, the structure
ethtool_rxnfc is defined with padding. If yes, a user-space buffer 'rxnfc'
is allocated through compat_alloc_user_space(). One thing to note here is
that, if 'ethcmd' is ETHTOOL_GRXCLSRLALL, the size of the buffer 'rxnfc' is
partially determined by 'rule_cnt', which is actually acquired from the
user-space buffer 'compat_rxnfc', i.e., 'compat_rxnfc->rule_cnt', through
get_user(). After 'rxnfc' is allocated, the data in the original user-space
buffer 'compat_rxnfc' is then copied to 'rxnfc' through copy_in_user(),
including the 'rule_cnt' field. However, after this copy, no check is
re-enforced on 'rxnfc->rule_cnt'. So it is possible that a malicious user
race to change the value in the 'compat_rxnfc->rule_cnt' between these two
copies. Through this way, the attacker can bypass the previous check on
'rule_cnt' and inject malicious data. This can cause undefined behavior of
the kernel and introduce potential security risk.
This patch avoids the above issue via copying the value acquired by
get_user() to 'rxnfc->rule_cn', if 'ethcmd' is ETHTOOL_GRXCLSRLALL.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 38b4f18d56372e1e21771ab7b0357b853330186c ]
gred_change_table_def() takes a pointer to TCA_GRED_DPS attribute,
and expects it will be able to interpret its contents as
struct tc_gred_sopt. Pass the correct gred attribute, instead of
TCA_OPTIONS.
This bug meant the table definition could never be changed after
Qdisc was initialized (unless whatever TCA_OPTIONS contained both
passed netlink validation and was a valid struct tc_gred_sopt...).
Old behaviour:
$ ip link add type dummy
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
RTNETLINK answers: Invalid argument
Now:
$ ip link add type dummy
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
Fixes: f62d6b936df5 ("[PKT_SCHED]: GRED: Use central VQ change procedure")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4ba4c566ba8448a05e6257e0b98a21f1a0d55315 ]
The loop wants to skip previously dumped addresses, so loops until
current index >= saved index. If the message fills it wants to save
the index for the next address to dump - ie., the one that did not
fit in the current message.
Currently, it is incrementing the index counter before comparing to the
saved index, and then the saved index is off by 1 - it assumes the
current address is going to fit in the message.
Change the index handling to increment only after a succesful dump.
Fixes: 502a2ffd7376a ("ipv6: convert idev_list to list macros")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ee1abcf689353f36d9322231b4320926096bdee0 ]
Commit a61bbcf28a8c ("[NET]: Store skb->timestamp as offset to a base
timestamp") introduces a neighbour control buffer and zeroes it out in
ndisc_rcv(), as ndisc_recv_ns() uses it.
Commit f2776ff04722 ("[IPV6]: Fix address/interface handling in UDP and
DCCP, according to the scoping architecture.") introduces the usage of the
IPv6 control buffer in protocol error handlers (e.g. inet6_iif() in
present-day __udp6_lib_err()).
Now, with commit b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate
redirect, instead of rt6_redirect()."), we call protocol error handlers
from ndisc_redirect_rcv(), after the control buffer is already stolen and
some parts are already zeroed out. This implies that inet6_iif() on this
path will always return zero.
This gives unexpected results on UDP socket lookup in __udp6_lib_err(), as
we might actually need to match sockets for a given interface.
Instead of always claiming the control buffer in ndisc_rcv(), do that only
when needed.
Fixes: b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dc012f3628eaecfb5ba68404a5c30ef501daf63d ]
syzbot found a use-after-free in inet6_mc_check [1]
The problem here is that inet6_mc_check() uses rcu
and read_lock(&iml->sflock)
So the fact that ip6_mc_leave_src() is called under RTNL
and the socket lock does not help us, we need to acquire
iml->sflock in write mode.
In the future, we should convert all this stuff to RCU.
[1]
BUG: KASAN: use-after-free in ipv6_addr_equal include/net/ipv6.h:521 [inline]
BUG: KASAN: use-after-free in inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649
Read of size 8 at addr ffff8801ce7f2510 by task syz-executor0/22432
CPU: 1 PID: 22432 Comm: syz-executor0 Not tainted 4.19.0-rc7+ #280
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
ipv6_addr_equal include/net/ipv6.h:521 [inline]
inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649
__raw_v6_lookup+0x320/0x3f0 net/ipv6/raw.c:98
ipv6_raw_deliver net/ipv6/raw.c:183 [inline]
raw6_local_deliver+0x3d3/0xcb0 net/ipv6/raw.c:240
ip6_input_finish+0x467/0x1aa0 net/ipv6/ip6_input.c:345
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:426
ip6_mc_input+0x48a/0xd20 net/ipv6/ip6_input.c:503
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:289 [inline]
ipv6_rcv+0x120/0x640 net/ipv6/ip6_input.c:271
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
netif_receive_skb_internal+0x12c/0x620 net/core/dev.c:5126
napi_frags_finish net/core/dev.c:5664 [inline]
napi_gro_frags+0x75a/0xc90 net/core/dev.c:5737
tun_get_user+0x3189/0x4250 drivers/net/tun.c:1923
tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1968
call_write_iter include/linux/fs.h:1808 [inline]
do_iter_readv_writev+0x8b0/0xa80 fs/read_write.c:680
do_iter_write+0x185/0x5f0 fs/read_write.c:959
vfs_writev+0x1f1/0x360 fs/read_write.c:1004
do_writev+0x11a/0x310 fs/read_write.c:1039
__do_sys_writev fs/read_write.c:1112 [inline]
__se_sys_writev fs/read_write.c:1109 [inline]
__x64_sys_writev+0x75/0xb0 fs/read_write.c:1109
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457421
Code: 75 14 b8 14 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 34 b5 fb ff c3 48 83 ec 08 e8 1a 2d 00 00 48 89 04 24 b8 14 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 63 2d 00 00 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00007f2d30ecaba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 000000000000003e RCX: 0000000000457421
RDX: 0000000000000001 RSI: 00007f2d30ecabf0 RDI: 00000000000000f0
RBP: 0000000020000500 R08: 00000000000000f0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 00007f2d30ecb6d4
R13: 00000000004c4890 R14: 00000000004d7b90 R15: 00000000ffffffff
Allocated by task 22437:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
__do_kmalloc mm/slab.c:3718 [inline]
__kmalloc+0x14e/0x760 mm/slab.c:3727
kmalloc include/linux/slab.h:518 [inline]
sock_kmalloc+0x15a/0x1f0 net/core/sock.c:1983
ip6_mc_source+0x14dd/0x1960 net/ipv6/mcast.c:427
do_ipv6_setsockopt.isra.9+0x3afb/0x45d0 net/ipv6/ipv6_sockglue.c:743
ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:933
rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1069
sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3038
__sys_setsockopt+0x1ba/0x3c0 net/socket.c:1902
__do_sys_setsockopt net/socket.c:1913 [inline]
__se_sys_setsockopt net/socket.c:1910 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:1910
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 22430:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xcf/0x230 mm/slab.c:3813
__sock_kfree_s net/core/sock.c:2004 [inline]
sock_kfree_s+0x29/0x60 net/core/sock.c:2010
ip6_mc_leave_src+0x11a/0x1d0 net/ipv6/mcast.c:2448
__ipv6_sock_mc_close+0x20b/0x4e0 net/ipv6/mcast.c:310
ipv6_sock_mc_close+0x158/0x1d0 net/ipv6/mcast.c:328
inet6_release+0x40/0x70 net/ipv6/af_inet6.c:452
__sock_release+0xd7/0x250 net/socket.c:579
sock_close+0x19/0x20 net/socket.c:1141
__fput+0x385/0xa30 fs/file_table.c:278
____fput+0x15/0x20 fs/file_table.c:309
task_work_run+0x1e8/0x2a0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:193 [inline]
exit_to_usermode_loop+0x318/0x380 arch/x86/entry/common.c:166
prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
do_syscall_64+0x6be/0x820 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8801ce7f2500
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 16 bytes inside of
192-byte region [ffff8801ce7f2500, ffff8801ce7f25c0)
The buggy address belongs to the page:
page:ffffea000739fc80 count:1 mapcount:0 mapping:ffff8801da800040 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0006f6e548 ffffea000737b948 ffff8801da800040
raw: 0000000000000000 ffff8801ce7f2000 0000000100000010 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801ce7f2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801ce7f2480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8801ce7f2500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8801ce7f2580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8801ce7f2600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0fe5119e267f3e3d8ac206895f5922195ec55a8a upstream.
Recently a check was added which prevents marking of routers with zero
source address, but for IPv6 that cannot happen as the relevant RFCs
actually forbid such packets:
RFC 2710 (MLDv1):
"To be valid, the Query message MUST
come from a link-local IPv6 Source Address, be at least 24 octets
long, and have a correct MLD checksum."
Same goes for RFC 3810.
And also it can be seen as a requirement in ipv6_mc_check_mld_query()
which is used by the bridge to validate the message before processing
it. Thus any queries with :: source address won't be processed anyway.
So just remove the check for zero IPv6 source address from the query
processing function.
Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5a2de63fd1a59c30c02526d427bc014b98adf508 upstream.
Based on RFC 4541, 2.1.1. IGMP Forwarding Rules
The switch supporting IGMP snooping must maintain a list of
multicast routers and the ports on which they are attached. This
list can be constructed in any combination of the following ways:
a) This list should be built by the snooping switch sending
Multicast Router Solicitation messages as described in IGMP
Multicast Router Discovery [MRDISC]. It may also snoop
Multicast Router Advertisement messages sent by and to other
nodes.
b) The arrival port for IGMP Queries (sent by multicast routers)
where the source address is not 0.0.0.0.
We should not add the port to router list when receives query with source
0.0.0.0.
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a3c18422a4b4e108bcf6a2328f48867e1003fd95 ]
Socket must be held while under the protection of the l2tp lock; there
is no guarantee that sk remains valid after the read_unlock_bh() call.
Same issue for l2tp_ip and l2tp_ip6.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c3483384ee511ee2af40b4076366cd82a6a47b86 ]
This patch should fix the issues seen with a recent fix to prevent
tunnel-in-tunnel frames from being generated with GRO. The fix itself is
correct for now as long as we do not add any devices that support
NETIF_F_GSO_GRE_CSUM. When such a device is added it could have the
potential to mess things up due to the fact that the outer transport header
points to the outer UDP header and not the GRE header as would be expected.
Fixes: fac8e0f579695 ("tunnels: Don't apply GRO to multiple layers of encapsulation.")
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f92083eb58f85ea114d97f65fcbe22be5b0468d ]
This is the same fix than commit a5d0dc810abf ("vti: flush x-netns xfrm
cache when vti interface is removed")
This patch fixes a refcnt problem when a x-netns vti6 interface is removed:
unregister_netdevice: waiting for vti6_test to become free. Usage count = 1
Here is a script to reproduce the problem:
ip link set dev ntfp2 up
ip addr add dev ntfp2 2001::1/64
ip link add vti6_test type vti6 local 2001::1 remote 2001::2 key 1
ip netns add secure
ip link set vti6_test netns secure
ip netns exec secure ip link set vti6_test up
ip netns exec secure ip link s lo up
ip netns exec secure ip addr add dev vti6_test 2003::1/64
ip -6 xfrm policy add dir out tmpl src 2001::1 dst 2001::2 proto esp \
mode tunnel mark 1
ip -6 xfrm policy add dir in tmpl src 2001::2 dst 2001::1 proto esp \
mode tunnel mark 1
ip xfrm state add src 2001::1 dst 2001::2 proto esp spi 1 mode tunnel \
enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1
ip xfrm state add src 2001::2 dst 2001::1 proto esp spi 1 mode tunnel \
enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1
ip netns exec secure ping6 -c 4 2003::2
ip netns del secure
CC: Lance Richardson <lrichard@redhat.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7f4f332f082c4d4ba53582f902ed6b44fd6f45e ]
Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b06cdf3e688b98fcc9945873b5d42792bd4eee0 ]
If a socket has a valid dst cache, then xfrm_lookup_route will get
skipped. However, the cache is not invalidated when applying policy to a
socket (i.e. IPV6_XFRM_POLICY). The result is that new policies are
sometimes ignored on those sockets. (Note: This was broken for IPv4 and
IPv6 at different times.)
This can be demonstrated like so,
1. Create UDP socket.
2. connect() the socket.
3. Apply an outbound XFRM policy to the socket. (setsockopt)
4. send() data on the socket.
Packets will continue to be sent in the clear instead of matching an
xfrm or returning a no-match error (EAGAIN). This affects calls to
send() and not sendto().
Invalidating the sk_dst_cache is necessary to correctly apply xfrm
policies. Since we do this in xfrm_user_policy(), the sk_lock was
already acquired in either do_ip_setsockopt() or do_ipv6_setsockopt(),
and we may call __sk_dst_reset().
Performance impact should be negligible, since this code is only called
when changing xfrm policy, and only affects the socket in question.
Fixes: 00bc0ef5880d ("ipv6: Skip XFRM lookup if dst_entry in socket cache is valid")
Tested: https://android-review.googlesource.com/517555
Tested: https://android-review.googlesource.com/418659
Signed-off-by: Jonathan Basseri <misterikkit@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 48cac18ecf1de82f76259a54402c3adb7839ad01 ]
Andrey reported a use-after-free in IPv6 stack.
Issue here is that we free the socket while it still has skb
in TX path and in some queues.
It happens here because IPv6 reassembly unit messes skb->truesize,
breaking skb_set_owner_w() badly.
We fixed a similar issue for IPV4 in commit 8282f27449bf ("inet: frag:
Always orphan skbs inside ip_defrag()")
Acked-by: Joe Stringer <joe@ovn.org>
==================================================================
BUG: KASAN: use-after-free in sock_wfree+0x118/0x120
Read of size 8 at addr ffff880062da0060 by task a.out/4140
page:ffffea00018b6800 count:1 mapcount:0 mapping: (null)
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 0000000000000000 0000000000000000 0000000180130013
raw: dead000000000100 dead000000000200 ffff88006741f140 0000000000000000
page dumped because: kasan: bad access detected
CPU: 0 PID: 4140 Comm: a.out Not tainted 4.10.0-rc3+ #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:15
dump_stack+0x292/0x398 lib/dump_stack.c:51
describe_address mm/kasan/report.c:262
kasan_report_error+0x121/0x560 mm/kasan/report.c:370
kasan_report mm/kasan/report.c:392
__asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:413
sock_flag ./arch/x86/include/asm/bitops.h:324
sock_wfree+0x118/0x120 net/core/sock.c:1631
skb_release_head_state+0xfc/0x250 net/core/skbuff.c:655
skb_release_all+0x15/0x60 net/core/skbuff.c:668
__kfree_skb+0x15/0x20 net/core/skbuff.c:684
kfree_skb+0x16e/0x4e0 net/core/skbuff.c:705
inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
inet_frag_put ./include/net/inet_frag.h:133
nf_ct_frag6_gather+0x1125/0x38b0 net/ipv6/netfilter/nf_conntrack_reasm.c:617
ipv6_defrag+0x21b/0x350 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
nf_hook_entry_hookfn ./include/linux/netfilter.h:102
nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
nf_hook ./include/linux/netfilter.h:212
__ip6_local_out+0x52c/0xaf0 net/ipv6/output_core.c:160
ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
rawv6_push_pending_frames net/ipv6/raw.c:613
rawv6_sendmsg+0x2cff/0x4130 net/ipv6/raw.c:927
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
sock_sendmsg_nosec net/socket.c:635
sock_sendmsg+0xca/0x110 net/socket.c:645
sock_write_iter+0x326/0x620 net/socket.c:848
new_sync_write fs/read_write.c:499
__vfs_write+0x483/0x760 fs/read_write.c:512
vfs_write+0x187/0x530 fs/read_write.c:560
SYSC_write fs/read_write.c:607
SyS_write+0xfb/0x230 fs/read_write.c:599
entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
RIP: 0033:0x7ff26e6f5b79
RSP: 002b:00007ff268e0ed98 EFLAGS: 00000206 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007ff268e0f9c0 RCX: 00007ff26e6f5b79
RDX: 0000000000000010 RSI: 0000000020f50fe1 RDI: 0000000000000003
RBP: 00007ff26ebc1220 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ff268e0f9c0 R14: 00007ff26efec040 R15: 0000000000000003
The buggy address belongs to the object at ffff880062da0000
which belongs to the cache RAWv6 of size 1504
The buggy address ffff880062da0060 is located 96 bytes inside
of 1504-byte region [ffff880062da0000, ffff880062da05e0)
Freed by task 4113:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514
kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578
slab_free_hook mm/slub.c:1352
slab_free_freelist_hook mm/slub.c:1374
slab_free mm/slub.c:2951
kmem_cache_free+0xb2/0x2c0 mm/slub.c:2973
sk_prot_free net/core/sock.c:1377
__sk_destruct+0x49c/0x6e0 net/core/sock.c:1452
sk_destruct+0x47/0x80 net/core/sock.c:1460
__sk_free+0x57/0x230 net/core/sock.c:1468
sk_free+0x23/0x30 net/core/sock.c:1479
sock_put ./include/net/sock.h:1638
sk_common_release+0x31e/0x4e0 net/core/sock.c:2782
rawv6_close+0x54/0x80 net/ipv6/raw.c:1214
inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
inet6_release+0x50/0x70 net/ipv6/af_inet6.c:431
sock_release+0x8d/0x1e0 net/socket.c:599
sock_close+0x16/0x20 net/socket.c:1063
__fput+0x332/0x7f0 fs/file_table.c:208
____fput+0x15/0x20 fs/file_table.c:244
task_work_run+0x19b/0x270 kernel/task_work.c:116
exit_task_work ./include/linux/task_work.h:21
do_exit+0x186b/0x2800 kernel/exit.c:839
do_group_exit+0x149/0x420 kernel/exit.c:943
SYSC_exit_group kernel/exit.c:954
SyS_exit_group+0x1d/0x20 kernel/exit.c:952
entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
Allocated by task 4115:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544
slab_post_alloc_hook mm/slab.h:432
slab_alloc_node mm/slub.c:2708
slab_alloc mm/slub.c:2716
kmem_cache_alloc+0x1af/0x250 mm/slub.c:2721
sk_prot_alloc+0x65/0x2a0 net/core/sock.c:1334
sk_alloc+0x105/0x1010 net/core/sock.c:1396
inet6_create+0x44d/0x1150 net/ipv6/af_inet6.c:183
__sock_create+0x4f6/0x880 net/socket.c:1199
sock_create net/socket.c:1239
SYSC_socket net/socket.c:1269
SyS_socket+0xf9/0x230 net/socket.c:1249
entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
Memory state around the buggy address:
ffff880062d9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880062d9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff880062da0000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff880062da0080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880062da0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
and connect handlers
[ Upstream commit e3c42b61ff813921ba58cfc0019e3fd63f651190 ]
Verify that the caller-provided sockaddr structure is large enough to
contain the sa_family field, before accessing it in bind() and connect()
handlers of the AF_IUCV socket. Since neither syscall enforces a minimum
size of the corresponding memory region, very short sockaddrs (zero or
one byte long) result in operating on uninitialized memory while
referencing .sa_family.
Fixes: 52a82e23b9f2 ("af_iucv: Validate socket address length in iucv_sock_bind()")
Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com>
[jwi: removed unneeded null-check for addr]
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3575dbf2cbbc8e598f17ec441aed526dbea0e1bd ]
Remove a write-only stack variable from unix_attach_fds(). This is a
left-over from the security fix in:
commit 712f4aad406bb1ed67f3f98d04c044191f0ff593
Author: willy tarreau <w@1wt.eu>
Date: Sun Jan 10 07:54:56 2016 +0100
unix: properly account for FDs passed over unix sockets
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb28c306b93b71f2741ce1a5a66289db26715f4d ]
In case unpair_device() was called through mgmt interface at the same time
when pairing was in progress, Bluetooth kernel module crash was seen.
[ 600.351225] general protection fault: 0000 [#1] SMP PTI
[ 600.351235] CPU: 1 PID: 11096 Comm: btmgmt Tainted: G OE 4.19.0-rc1+ #1
[ 600.351238] Hardware name: Dell Inc. Latitude E5440/08RCYC, BIOS A18 05/14/2017
[ 600.351272] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[ 600.351276] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[ 600.351279] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[ 600.351282] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[ 600.351285] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[ 600.351287] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[ 600.351290] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[ 600.351292] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[ 600.351295] FS: 00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[ 600.351298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 600.351300] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0
[ 600.351302] Call Trace:
[ 600.351325] smp_failure+0x4f/0x70 [bluetooth]
[ 600.351345] smp_cancel_pairing+0x74/0x80 [bluetooth]
[ 600.351370] unpair_device+0x1c1/0x330 [bluetooth]
[ 600.351399] hci_sock_sendmsg+0x960/0x9f0 [bluetooth]
[ 600.351409] ? apparmor_socket_sendmsg+0x1e/0x20
[ 600.351417] sock_sendmsg+0x3e/0x50
[ 600.351422] sock_write_iter+0x85/0xf0
[ 600.351429] do_iter_readv_writev+0x12b/0x1b0
[ 600.351434] do_iter_write+0x87/0x1a0
[ 600.351439] vfs_writev+0x98/0x110
[ 600.351443] ? ep_poll+0x16d/0x3d0
[ 600.351447] ? ep_modify+0x73/0x170
[ 600.351451] do_writev+0x61/0xf0
[ 600.351455] ? do_writev+0x61/0xf0
[ 600.351460] __x64_sys_writev+0x1c/0x20
[ 600.351465] do_syscall_64+0x5a/0x110
[ 600.351471] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 600.351474] RIP: 0033:0x7fb2bdb62fe0
[ 600.351477] Code: 73 01 c3 48 8b 0d b8 6e 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 69 c7 2c 00 00 75 10 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 de 80 01 00 48 89 04 24
[ 600.351479] RSP: 002b:00007ffe062cb8f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
[ 600.351484] RAX: ffffffffffffffda RBX: 000000000255b3d0 RCX: 00007fb2bdb62fe0
[ 600.351487] RDX: 0000000000000001 RSI: 00007ffe062cb920 RDI: 0000000000000004
[ 600.351490] RBP: 00007ffe062cb920 R08: 000000000255bd80 R09: 0000000000000000
[ 600.351494] R10: 0000000000000353 R11: 0000000000000246 R12: 0000000000000001
[ 600.351497] R13: 00007ffe062cbbe0 R14: 0000000000000000 R15: 0000000000000000
[ 600.351501] Modules linked in: algif_hash algif_skcipher af_alg cmac ipt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_nat_ipv4 xt_addrtype iptable_filter ip_tables xt_conntrack x_tables nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter bridge stp llc overlay arc4 nls_iso8859_1 dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp dell_laptop kvm_intel crct10dif_pclmul dell_smm_hwmon crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper intel_cstate intel_rapl_perf uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media hid_multitouch input_leds joydev serio_raw dell_wmi snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic dell_smbios dcdbas sparse_keymap
[ 600.351569] snd_hda_intel btusb snd_hda_codec btrtl btbcm btintel snd_hda_core bluetooth(OE) snd_hwdep snd_pcm iwlmvm ecdh_generic wmi_bmof dell_wmi_descriptor snd_seq_midi mac80211 snd_seq_midi_event lpc_ich iwlwifi snd_rawmidi snd_seq snd_seq_device snd_timer cfg80211 snd soundcore mei_me mei dell_rbtn dell_smo8800 mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid hid i915 nouveau kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi psmouse ahci sdhci_pci cqhci libahci fb_sys_fops sdhci drm e1000e video wmi
[ 600.351637] ---[ end trace e49e9f1df09c94fb ]---
[ 600.351664] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[ 600.351666] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[ 600.351669] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[ 600.351672] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[ 600.351674] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[ 600.351676] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[ 600.351679] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[ 600.351681] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[ 600.351684] FS: 00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[ 600.351686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 600.351689] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0
Crash happened because list_del_rcu() was called twice for smp->ltk. This
was possible if unpair_device was called right after ltk was generated
but before keys were distributed.
In this commit smp_cancel_pairing was refactored to cancel pairing if it
is in progress and otherwise just removes keys. Once keys are removed from
rcu list, pointers to smp context's keys are set to NULL to make sure
removed list items are not accessed later.
This commit also adjusts the functionality of mgmt unpair_device() little
bit. Previously pairing was canceled only if pairing was in state that
keys were already generated. With this commit unpair_device() cancels
pairing already in earlier states.
Bug was found by fuzzing kernel SMP implementation using Synopsys
Defensics.
Reported-by: Pekka Oikarainen <pekka.oikarainen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32bf94fb5c2ec4ec842152d0e5937cd4bb6738fa ]
XFRM mode parameters passed as part of the user templates
in the IP_XFRM_POLICY are never properly validated. Passing
values other than valid XFRM modes can cause stack-out-of-bounds
reads to occur later in the XFRM processing:
[ 140.535608] ================================================================
[ 140.543058] BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x17e4/0x1cc4
[ 140.550306] Read of size 4 at addr ffffffc0238a7a58 by task repro/5148
[ 140.557369]
[ 140.558927] Call trace:
[ 140.558936] dump_backtrace+0x0/0x388
[ 140.558940] show_stack+0x24/0x30
[ 140.558946] __dump_stack+0x24/0x2c
[ 140.558949] dump_stack+0x8c/0xd0
[ 140.558956] print_address_description+0x74/0x234
[ 140.558960] kasan_report+0x240/0x264
[ 140.558963] __asan_report_load4_noabort+0x2c/0x38
[ 140.558967] xfrm_state_find+0x17e4/0x1cc4
[ 140.558971] xfrm_resolve_and_create_bundle+0x40c/0x1fb8
[ 140.558975] xfrm_lookup+0x238/0x1444
[ 140.558977] xfrm_lookup_route+0x48/0x11c
[ 140.558984] ip_route_output_flow+0x88/0xc4
[ 140.558991] raw_sendmsg+0xa74/0x266c
[ 140.558996] inet_sendmsg+0x258/0x3b0
[ 140.559002] sock_sendmsg+0xbc/0xec
[ 140.559005] SyS_sendto+0x3a8/0x5a8
[ 140.559008] el0_svc_naked+0x34/0x38
[ 140.559009]
[ 140.592245] page dumped because: kasan: bad access detected
[ 140.597981] page_owner info is not active (free page?)
[ 140.603267]
[ 140.653503] ================================================================
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24f33e64fcd0d50a4b1a8e5b41bd0257aa66b0e8 ]
Core regulatory hints didn't set wiphy_idx to WIPHY_IDX_INVALID. Since
the regulatory request is zeroed, wiphy_idx was always implicitly set to
0. This resulted in updating only phy #0.
Fix that.
Fixes: 806a9e39670b ("cfg80211: make regulatory_request use wiphy_idx instead of wiphy")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[add fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8682250b3c1b75a45feb7452bc413d004cfe3778 ]
If a frame is dropped for any reason, mac80211 wouldn't report the TX
status back to user space.
As the user space may rely on the TX_STATUS to kick its state
machines, resends etc, it's better to just report this frame as not
acked instead.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 215ab0f021c9fea3c18b75e7d522400ee6a49990 ]
After commit d6990976af7c5d8f55903bfb4289b6fb030bf754 ("vti6: fix PMTU caching
and reporting on xmit"), some too big skbs might be potentially passed down to
__xfrm6_output, causing it to fail to transmit but not free the skb, causing a
leak of skb, and consequentially a leak of dst references.
After running pmtu.sh, that shows as failure to unregister devices in a namespace:
[ 311.397671] unregister_netdevice: waiting for veth_b to become free. Usage count = 1
The fix is to call kfree_skb in case of transmit failures.
Fixes: dd767856a36e ("xfrm6: Don't call icmpv6_send on local error")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07bf7908950a8b14e81aa1807e3c667eab39287a ]
We don't validate the address prefix lengths in the xfrm
selector we got from userspace. This can lead to undefined
behaviour in the address matching functions if the prefix
is too big for the given address family. Fix this by checking
the prefixes and refuse SA/policy insertation when a prefix
is invalid.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Air Icy <icytxw@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e1d6eca5113858ed2caea61a5adc03c595f6096 ]
We have an impressive number of syzkaller bugs that are linked
to the fact that syzbot was able to create a networking device
with millions of TX (or RX) queues.
Let's limit the number of RX/TX queues to 4096, this really should
cover all known cases.
A separate patch will add various cond_resched() in the loops
handling sysfs entries at device creation and dismantle.
Tested:
lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap
RTNETLINK answers: Invalid argument
lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap
real 0m0.180s
user 0m0.000s
sys 0m0.107s
Fixes: 76ff5cc91935 ("rtnl: allow to specify number of rx and tx queues on device creation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f88b4c01b97e09535505cf3c327fdbce55c27f00 ]
netlbl_unlabel_addrinfo_get() assumes that if it finds the
NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the
NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is
not necessarily the case as the current checks in
netlbl_unlabel_staticadd() and friends are not sufficent to
enforce this.
If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR,
NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes,
these functions will all call netlbl_unlabel_addrinfo_get() which
will then attempt dereference NULL when fetching the non-existent
NLBL_UNLABEL_A_IPV4MASK attribute:
Unable to handle kernel NULL pointer dereference at virtual address 0
Process unlab (pid: 31762, stack limit = 0xffffff80502d8000)
Call trace:
netlbl_unlabel_addrinfo_get+0x44/0xd8
netlbl_unlabel_staticremovedef+0x98/0xe0
genl_rcv_msg+0x354/0x388
netlink_rcv_skb+0xac/0x118
genl_rcv+0x34/0x48
netlink_unicast+0x158/0x1f0
netlink_sendmsg+0x32c/0x338
sock_sendmsg+0x44/0x60
___sys_sendmsg+0x1d0/0x2a8
__sys_sendmsg+0x64/0xb4
SyS_sendmsg+0x34/0x4c
el0_svc_naked+0x34/0x38
Code: 51001149 7100113f 540000a0 f9401508 (79400108)
---[ end trace f6438a488e737143 ]---
Kernel panic - not syncing: Fatal exception
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 86f9bd1ff61c413a2a251fa736463295e4e24733 ]
The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly
handle starting/stopping the iteration. The problem is that at some point
during the iteration, an overflow is detected and the process is
subsequently stopped. The item being shown via seq_printf() when the
overflow occurs is not actually shown, though. When start() is
subsequently called to resume iterating, it returns the next item, and
thus the item that was being processed when the overflow occurred never
gets printed.
Alter the meaning of the private data member "offset". Currently, when it
is not 0 (which only happens at the very beginning), "offset" represents
the next hlist item to be printed. After this change, "offset" always
represents the current item.
This is also consistent with the private data member "bucket", which
represents the current bucket, and also the use of "pos" as defined in
seq_file.txt:
The pos passed to start() will always be either zero, or the most
recent pos used in the previous session.
Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit af7d6cce53694a88d6a1bb60c9a239a6a5144459 ]
Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop
exceptions"), exceptions get deprecated separately from cached
routes. In particular, administrative changes don't clear PMTU anymore.
As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes
on PMTU of exceptions for MTU-less routes"), the PMTU discovered before
the local MTU change can become stale:
- if the local MTU is now lower than the PMTU, that PMTU is now
incorrect
- if the local MTU was the lowest value in the path, and is increased,
we might discover a higher PMTU
Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those
cases.
If the exception was locked, the discovered PMTU was smaller than the
minimal accepted PMTU. In that case, if the new local MTU is smaller
than the current PMTU, let PMTU discovery figure out if locking of the
exception is still needed.
To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU
notifier. By the time the notifier is called, dev->mtu has been
changed. This patch adds the old MTU as additional information in the
notifier structure, and a new call_netdevice_notifiers_u32() function.
Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 64199fc0a46ba211362472f7f942f900af9492fd ]
Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy,
do not do it.
Fixes: 2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ccfec9e5cb2d48df5a955b7bf47f7782157d3bc2]
Cong noted that we need the same checks introduced by commit 76c0ddd8c3a6
("ip6_tunnel: be careful when accessing the inner header")
even for ipv4 tunnels.
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 76c0ddd8c3a683f6e2c6e60e11dc1a1558caf4bc ]
the ip6 tunnel xmit ndo assumes that the processed skb always
contains an ip[v6] header, but syzbot has found a way to send
frames that fall short of this assumption, leading to the following splat:
BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307
[inline]
BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0
net/ipv6/ip6_tunnel.c:1390
CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline]
ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390
__netdev_start_xmit include/linux/netdevice.h:4066 [inline]
netdev_start_xmit include/linux/netdevice.h:4075 [inline]
xmit_one net/core/dev.c:3026 [inline]
dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042
__dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590
packet_snd net/packet/af_packet.c:2944 [inline]
packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmmsg+0x42d/0x800 net/socket.c:2136
SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167
SyS_sendmmsg+0x63/0x90 net/socket.c:2162
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x441819
RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819
RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510
R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
packet_alloc_skb net/packet/af_packet.c:2803 [inline]
packet_snd net/packet/af_packet.c:2894 [inline]
packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmmsg+0x42d/0x800 net/socket.c:2136
SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167
SyS_sendmmsg+0x63/0x90 net/socket.c:2162
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
This change addresses the issue adding the needed check before
accessing the inner header.
The ipv4 side of the issue is apparently there since the ipv4 over ipv6
initial support, and the ipv6 side predates git history.
Fixes: c4d3efafcc93 ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c953d63548207a085abcb12a15fefc8a11ffdf0a upstream.
The info->target comes from userspace and it would be used directly.
So we need to add the sanity check to make sure it is a valid standard
target, although the ebtables tool has already checked it. Kernel needs
to validate anything coming from userspace.
If the target is set as an evil value, it would break the ebtables
and cause a panic. Because the non-standard target is treated as one
offset.
Now add one helper function ebt_invalid_target, and we would replace
the macro INVALID_TARGET later.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Loic <hackurx@opensec.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 58152ecbbcc6a0ce7fddd5bf5f6ee535834ece0c ]
In case skb in out_or_order_queue is the result of
multiple skbs coalescing, we would like to get a proper gso_segs
counter tracking, so that future tcp_drop() can report an accurate
number.
I chose to not implement this tracking for skbs in receive queue,
since they are not dropped, unless socket is disconnected.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8541b21e781a22dce52a74fef0b9bed00404a1cd ]
In order to be able to give better diagnostics and detect
malicious traffic, we need to have better sk->sk_drops tracking.
Fixes: 9f5afeae5152 ("tcp: use an RB tree for ooo receive queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 72cd43ba64fc172a443410ce01645895850844c8 ]
Juha-Matti Tilli reported that malicious peers could inject tiny
packets in out_of_order_queue, forcing very expensive calls
to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for
every incoming packet. out_of_order_queue rb-tree can contain
thousands of nodes, iterating over all of them is not nice.
Before linux-4.9, we would have pruned all packets in ofo_queue
in one go, every XXXX packets. XXXX depends on sk_rcvbuf and skbs
truesize, but is about 7000 packets with tcp_rmem[2] default of 6 MB.
Since we plan to increase tcp_rmem[2] in the future to cope with
modern BDP, can not revert to the old behavior, without great pain.
Strategy taken in this patch is to purge ~12.5 % of the queue capacity.
Fixes: 36a6503fedda ("tcp: refine tcp_prune_ofo_queue() to not drop all packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 76f0dcbb5ae1a7c3dbeec13dd98233b8e6b0b32a ]
When skb replaces another one in ooo queue, I forgot to also
update tp->ooo_last_skb as well, if the replaced skb was the last one
in the queue.
To fix this, we simply can re-use the code that runs after an insertion,
trying to merge skbs at the right of current skb.
This not only fixes the bug, but also remove all small skbs that might
be a subset of the new one.
Example:
We receive segments 2001:3001, 4001:5001
Then we receive 2001:8001 : We should replace 2001:3001 with the big
skb, but also remove 4001:50001 from the queue to save space.
packetdrill test demonstrating the bug
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+0.100 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0.01 < . 1001:2001(1000) ack 1 win 1024
+0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001>
+0.01 < . 1001:3001(2000) ack 1 win 1024
+0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001 1001:3001>
Fixes: 9f5afeae5152 ("tcp: use an RB tree for ooo receive queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yuchung Cheng <ycheng@google.com>
Cc: Yaogong Wang <wygivan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9f5afeae51526b3ad7b7cb21ee8b145ce6ea7a7a ]
Over the years, TCP BDP has increased by several orders of magnitude,
and some people are considering to reach the 2 Gbytes limit.
Even with current window scale limit of 14, ~1 Gbytes maps to ~740,000
MSS.
In presence of packet losses (or reorders), TCP stores incoming packets
into an out of order queue, and number of skbs sitting there waiting for
the missing packets to be received can be in the 10^5 range.
Most packets are appended to the tail of this queue, and when
packets can finally be transferred to receive queue, we scan the queue
from its head.
However, in presence of heavy losses, we might have to find an arbitrary
point in this queue, involving a linear scan for every incoming packet,
throwing away cpu caches.
This patch converts it to a RB tree, to get bounded latencies.
Yaogong wrote a preliminary patch about 2 years ago.
Eric did the rebase, added ofo_last_skb cache, polishing and tests.
Tested with network dropping between 1 and 10 % packets, with good
success (about 30 % increase of throughput in stress tests)
Next step would be to also use an RB tree for the write queue at sender
side ;)
Signed-off-by: Yaogong Wang <wygivan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-By: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 532182cd610782db8c18230c2747626562032205 ]
Now ss can report sk_drops, we can instruct TCP to increment
this per socket counter when it drops an incoming frame, to refine
monitoring and debugging.
Following patch takes care of listeners drops.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 211710ca74adf790b46ab3867fcce8047b573cd1 upstream.
key->sta is only valid after ieee80211_key_link, which is called later
in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is
never set when management frame protection is enabled.
Fixes: e548c49e6dc6b ("mac80211: add key flag for management keys")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c6e57b3896fc76299913b8cfd82d853bee8a2c84 ]
When tracing is enabled, all the debug messages are recorded and must
not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the
user with:
WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
Workqueue: phy1 ieee80211_iface_work [mac80211]
RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211]
Call Trace:
__sdata_dbg+0xbd/0x120 [mac80211]
ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211]
ieee80211_iface_work+0x21d/0x320 [mac80211]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0007e94355fdb71a1cf5dba0754155cba08f0666 ]
When performing a channel switch flow for a managed interface, the
flow did not update the bandwidth of the AP station and the rate
scale algorithm. In case of a channel width downgrade, this would
result with the rate scale algorithm using a bandwidth that does not
match the interface channel configuration.
Fix this by updating the AP station bandwidth and rate scaling algorithm
before the actual channel change in case of a bandwidth downgrade, or
after the actual channel change in case of a bandwidth upgrade.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
