summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2021-01-17net: drop bogus skb with CHECKSUM_PARTIAL and offset beyond end of trimmed ↵Vasily Averin
packet commit 54970a2fbb673f090b7f02d7f57b10b2e0707155 upstream. syzbot reproduces BUG_ON in skb_checksum_help(): tun creates (bogus) skb with huge partial-checksummed area and small ip packet inside. Then ip_rcv trims the skb based on size of internal ip packet, after that csum offset points beyond of trimmed skb. Then checksum_tg() called via netfilter hook triggers BUG_ON: offset = skb_checksum_start_offset(skb); BUG_ON(offset >= skb_headlen(skb)); To work around the problem this patch forces pskb_trim_rcsum_slow() to return -EINVAL in described scenario. It allows its callers to drop such kind of packets. Link: https://syzkaller.appspot.com/bug?id=b419a5ca95062664fe1a60b764621eb4526e2cd0 Reported-by: syzbot+7010af67ced6105e5ab6@syzkaller.appspotmail.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/1b2494af-2c56-8ee2-7bc0-923fcad1cdf8@virtuozzo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net: fix pmtu check in nopmtudisc modeFlorian Westphal
[ Upstream commit 50c661670f6a3908c273503dfa206dfc7aa54c07 ] For some reason ip_tunnel insist on setting the DF bit anyway when the inner header has the DF bit set, EVEN if the tunnel was configured with 'nopmtudisc'. This means that the script added in the previous commit cannot be made to work by adding the 'nopmtudisc' flag to the ip tunnel configuration. Doing so breaks connectivity even for the without-conntrack/netfilter scenario. When nopmtudisc is set, the tunnel will skip the mtu check, so no icmp error is sent to client. Then, because inner header has DF set, the outer header gets added with DF bit set as well. IP stack then sends an error to itself because the packet exceeds the device MTU. Fixes: 23a3647bc4f93 ("ip_tunnels: Use skb-len to PMTU check.") Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17net: ip: always refragment ip defragmented packetsFlorian Westphal
[ Upstream commit bb4cc1a18856a73f0ff5137df0c2a31f4c50f6cf ] Conntrack reassembly records the largest fragment size seen in IPCB. However, when this gets forwarded/transmitted, fragmentation will only be forced if one of the fragmented packets had the DF bit set. In that case, a flag in IPCB will force fragmentation even if the MTU is large enough. This should work fine, but this breaks with ip tunnels. Consider client that sends a UDP datagram of size X to another host. The client fragments the datagram, so two packets, of size y and z, are sent. DF bit is not set on any of these packets. Middlebox netfilter reassembles those packets back to single size-X packet, before routing decision. packet-size-vs-mtu checks in ip_forward are irrelevant, because DF bit isn't set. At output time, ip refragmentation is skipped as well because x is still smaller than the mtu of the output device. If ttransmit device is an ip tunnel, the packet size increases to x+overhead. Also, tunnel might be configured to force DF bit on outer header. In this case, packet will be dropped (exceeds MTU) and an ICMP error is generated back to sender. But sender already respects the announced MTU, all the packets that it sent did fit the announced mtu. Force refragmentation as per original sizes unconditionally so ip tunnel will encapsulate the fragments instead. The only other solution I see is to place ip refragmentation in the ip_tunnel code to handle this case. Fixes: d6b915e29f4ad ("ip_fragment: don't forward defragmented DF packet") Reported-by: Christian Perle <christian.perle@secunet.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12netfilter: xt_RATEEST: reject non-null terminated string from userspaceFlorian Westphal
commit 6cb56218ad9e580e519dcd23bfb3db08d8692e5a upstream. syzbot reports: detected buffer overflow in strlen [..] Call Trace: strlen include/linux/string.h:325 [inline] strlcpy include/linux/string.h:348 [inline] xt_rateest_tg_checkentry+0x2a5/0x6b0 net/netfilter/xt_RATEEST.c:143 strlcpy assumes src is a c-string. Check info->name before its used. Reported-by: syzbot+e86f7c428c8c50db65b4@syzkaller.appspotmail.com Fixes: 5859034d7eb8793 ("[NETFILTER]: x_tables: add RATEEST target") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12netfilter: ipset: fix shift-out-of-bounds in htable_bits()Vasily Averin
commit 5c8193f568ae16f3242abad6518dc2ca6c8eef86 upstream. htable_bits() can call jhash_size(32) and trigger shift-out-of-bounds UBSAN: shift-out-of-bounds in net/netfilter/ipset/ip_set_hash_gen.h:151:6 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 8498 Comm: syz-executor519 Not tainted 5.10.0-rc7-next-20201208-syzkaller #0 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395 htable_bits net/netfilter/ipset/ip_set_hash_gen.h:151 [inline] hash_mac_create.cold+0x58/0x9b net/netfilter/ipset/ip_set_hash_gen.h:1524 ip_set_create+0x610/0x1380 net/netfilter/ipset/ip_set_core.c:1115 nfnetlink_rcv_msg+0xecc/0x1180 net/netfilter/nfnetlink.c:252 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:600 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2345 ___sys_sendmsg+0xf3/0x170 net/socket.c:2399 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2432 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This patch replaces htable_bits() by simple fls(hashsize - 1) call: it alone returns valid nbits both for round and non-round hashsizes. It is normal to set any nbits here because it is validated inside following htable_size() call which returns 0 for nbits>31. Fixes: 1feab10d7e6d("netfilter: ipset: Unified hash type generation") Reported-by: syzbot+d66bfadebca46cf61a2b@syzkaller.appspotmail.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12net: sched: prevent invalid Scell_log shift countRandy Dunlap
[ Upstream commit bd1248f1ddbc48b0c30565fce897a3b6423313b8 ] Check Scell_log shift size in red_check_params() and modify all callers of red_check_params() to pass Scell_log. This prevents a shift out-of-bounds as detected by UBSAN: UBSAN: shift-out-of-bounds in ./include/net/red.h:252:22 shift exponent 72 is too large for 32-bit type 'int' Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: syzbot+97c5bd9cc81eca63d36e@syzkaller.appspotmail.com Cc: Nogah Frankel <nogahf@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()Guillaume Nault
[ Upstream commit 21fdca22eb7df2a1e194b8adb812ce370748b733 ] RT_TOS() only clears one of the ECN bits. Therefore, when fib_compute_spec_dst() resorts to a fib lookup, it can return different results depending on the value of the second ECN bit. For example, ECT(0) and ECT(1) packets could be treated differently. $ ip netns add ns0 $ ip netns add ns1 $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev lo up $ ip -netns ns1 link set dev lo up $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10/24 dev veth01 $ ip -netns ns1 address add 192.0.2.11/24 dev veth10 $ ip -netns ns1 address add 192.0.2.21/32 dev lo $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 src 192.0.2.21 $ ip netns exec ns1 sysctl -wq net.ipv4.icmp_echo_ignore_broadcasts=0 With TOS 4 and ECT(1), ns1 replies using source address 192.0.2.21 (ping uses -Q to set all TOS and ECN bits): $ ip netns exec ns0 ping -c 1 -b -Q 5 192.0.2.255 [...] 64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.544 ms But with TOS 4 and ECT(0), ns1 replies using source address 192.0.2.11 because the "tos 4" route isn't matched: $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255 [...] 64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.597 ms After this patch the ECN bits don't affect the result anymore: $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255 [...] 64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.591 ms Fixes: 35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29cfg80211: initialize rekey_dataSara Sharon
[ Upstream commit f495acd8851d7b345e5f0e521b2645b1e1f928a0 ] In case we have old supplicant, the akm field is uninitialized. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.930f0ab7ebee.Ic546e384efab3f4a89f318eafddc3eb7d556aecb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29Bluetooth: Fix null pointer dereference in hci_event_packet()Anmol Karn
[ Upstream commit 6dfccd13db2ff2b709ef60a50163925d477549aa ] AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called from hci_event_packet() and there is a possibility, that hcon->amp_mgr may not be found when accessing after initialization of hcon. - net/bluetooth/hci_event.c:4945 The bug seems to get triggered in this line: bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon; Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status. Fixes: d5e911928bd8 ("Bluetooth: AMP: Process Physical Link Complete evt") Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f Signed-off-by: Anmol Karn <anmol.karan123@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt()Peilin Ye
commit f7e0e8b2f1b0a09b527885babda3e912ba820798 upstream. `num_reports` is not being properly checked. A malformed event packet with a large `num_reports` number makes hci_le_direct_adv_report_evt() read out of bounds. Fix it. Cc: stable@vger.kernel.org Fixes: 2f010b55884e ("Bluetooth: Add support for handling LE Direct Advertising Report events") Reported-and-tested-by: syzbot+24ebd650e20bd263ca01@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01 Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29net: bridge: vlan: fix error return code in __vlan_add()Zhang Changzhong
[ Upstream commit ee4f52a8de2c6f78b01f10b4c330867d88c1653a ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: f8ed289fab84 ("bridge: vlan: use br_vlan_(get|put)_master to deal with refcounts") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/1607071737-33875-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29tcp: fix cwnd-limited bug for TSO deferral where we send nothingNeal Cardwell
[ Upstream commit 299bcb55ecd1412f6df606e9dc0912d55610029e ] When cwnd is not a multiple of the TSO skb size of N*MSS, we can get into persistent scenarios where we have the following sequence: (1) ACK for full-sized skb of N*MSS arrives -> tcp_write_xmit() transmit full-sized skb with N*MSS -> move pacing release time forward -> exit tcp_write_xmit() because pacing time is in the future (2) TSQ callback or TCP internal pacing timer fires -> try to transmit next skb, but TSO deferral finds remainder of available cwnd is not big enough to trigger an immediate send now, so we defer sending until the next ACK. (3) repeat... So we can get into a case where we never mark ourselves as cwnd-limited for many seconds at a time, even with bulk/infinite-backlog senders, because: o In case (1) above, every time in tcp_write_xmit() we have enough cwnd to send a full-sized skb, we are not fully using the cwnd (because cwnd is not a multiple of the TSO skb size). So every time we send data, we are not cwnd limited, and so in the cwnd-limited tracking code in tcp_cwnd_validate() we mark ourselves as not cwnd-limited. o In case (2) above, every time in tcp_write_xmit() that we try to transmit the "remainder" of the cwnd but defer, we set the local variable is_cwnd_limited to true, but we do not send any packets, so sent_pkts is zero, so we don't call the cwnd-limited logic to update tp->is_cwnd_limited. Fixes: ca8a22634381 ("tcp: make cwnd-limited checks measurement-based, and gentler") Reported-by: Ingemar Johansson <ingemar.s.johansson@ericsson.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201209035759.1225145-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11net/x25: prevent a couple of overflowsDan Carpenter
[ Upstream commit 6ee50c8e262a0f0693dad264c3c99e30e6442a56 ] The .x25_addr[] address comes from the user and is not necessarily NUL terminated. This leads to a couple problems. The first problem is that the strlen() in x25_bind() can read beyond the end of the buffer. The second problem is more subtle and could result in memory corruption. The call tree is: x25_connect() --> x25_write_internal() --> x25_addr_aton() The .x25_addr[] buffers are copied to the "addresses" buffer from x25_write_internal() so it will lead to stack corruption. Verify that the strings are NUL terminated and return -EINVAL if they are not. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: a9288525d2ae ("X25: Dont let x25_bind use addresses containing characters") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11netfilter: bridge: reset skb->pkt_type after NF_INET_POST_ROUTING traversalAntoine Tenart
[ Upstream commit 44f64f23bae2f0fad25503bc7ab86cd08d04cd47 ] Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the hooks as, while it's an expected value for a bridge, routing expects PACKET_HOST. The change is undone later on after hook traversal. This can be seen with pairs of functions updating skb>pkt_type and then reverting it to its original value: For hook NF_INET_PRE_ROUTING: setup_pre_routing / br_nf_pre_routing_finish For hook NF_INET_FORWARD: br_nf_forward_ip / br_nf_forward_finish But the third case where netfilter does this, for hook NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing but never reverted. A comment says: /* We assume any code from br_dev_queue_push_xmit onwards doesn't care * about the value of skb->pkt_type. */ But when having a tunnel (say vxlan) attached to a bridge we have the following call trace: br_nf_pre_routing br_nf_pre_routing_ipv6 br_nf_pre_routing_finish br_nf_forward_ip br_nf_forward_finish br_nf_post_routing <- pkt_type is updated to PACKET_HOST br_nf_dev_queue_xmit <- but not reverted to its original value vxlan_xmit vxlan_xmit_one skb_tunnel_check_pmtu <- a check on pkt_type is performed In this specific case, this creates issues such as when an ICMPv6 PTB should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST and returns early). If the comment is right and no one cares about the value of skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting it to its original value should be safe. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11rose: Fix Null pointer dereference in rose_send_frame()Anmol Karn
[ Upstream commit 3b3fd068c56e3fbea30090859216a368398e39bf ] rose_send_frame() dereferences `neigh->dev` when called from rose_transmit_clear_request(), and the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh`, and it is initialized in rose_add_loopback_neigh() as NULL. i.e when `rose_loopback_neigh` used in rose_loopback_timer() its `->dev` was still NULL and rose_loopback_timer() was calling rose_rx_call_request() without checking for NULL. - net/rose/rose_link.c This bug seems to get triggered in this line: rose_call = (ax25_address *)neigh->dev->dev_addr; Fix it by adding NULL checking for `rose_loopback_neigh->dev` in rose_loopback_timer(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Jakub Kicinski <kuba@kernel.org> Reported-by: syzbot+a1c743815982d9496393@syzkaller.appspotmail.com Tested-by: syzbot+a1c743815982d9496393@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=9d2a7ca8c7f2e4b682c97578dfa3f236258300b3 Signed-off-by: Anmol Karn <anmol.karan123@gmail.com> Link: https://lore.kernel.org/r/20201119191043.28813-1-anmol.karan123@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11net/af_iucv: set correct sk_protocol for child socketsJulian Wiedmann
[ Upstream commit c5dab0941fcdc9664eb0ec0d4d51433216d91336 ] Child sockets erroneously inherit their parent's sk_type (ie. SOCK_*), instead of the PF_IUCV protocol that the parent was created with in iucv_sock_create(). We're currently not using sk->sk_protocol ourselves, so this shouldn't have much impact (except eg. getting the output in skb_dump() right). Fixes: eac3731bd04c ("[S390]: Add AF_IUCV socket support") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Link: https://lore.kernel.org/r/20201120100657.34407-1-jwi@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24mac80211: free sta in sta_info_insert_finish() on errorsJohannes Berg
commit 7bc40aedf24d31d8bea80e1161e996ef4299fb10 upstream. If sta_info_insert_finish() fails, we currently keep the station around and free it only in the caller, but there's only one such caller and it always frees it immediately. As syzbot found, another consequence of this split is that we can put things that sleep only into __cleanup_single_sta() and not in sta_info_free(), but this is the only place that requires such of sta_info_free() now. Change this to free the station in sta_info_insert_finish(), in which case we can still sleep. This will also let us unify the cleanup code later. Cc: stable@vger.kernel.org Fixes: dcd479e10a05 ("mac80211: always wind down STA state") Reported-by: syzbot+32c6c38c4812d22f2f0b@syzkaller.appspotmail.com Reported-by: syzbot+4c81fe92e372d26c4246@syzkaller.appspotmail.com Reported-by: syzbot+6a7fe9faf0d1d61bc24a@syzkaller.appspotmail.com Reported-by: syzbot+abed06851c5ffe010921@syzkaller.appspotmail.com Reported-by: syzbot+b7aeb9318541a1c709f1@syzkaller.appspotmail.com Reported-by: syzbot+d5a9416c6cafe53b5dd0@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24mac80211: allow driver to prevent two stations w/ same addressJohannes Berg
commit 3110489117581a980537b6d999a3724214ba772c upstream. Some devices or drivers cannot deal with having the same station address for different virtual interfaces, say as a client to two virtual AP interfaces. Rather than requiring each driver with a limitation like that to enforce it, add a hardware flag for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24mac80211: minstrel: fix tx status processing corner caseFelix Fietkau
commit b2911a84396f72149dce310a3b64d8948212c1b3 upstream. Some drivers fill the status rate list without setting the rate index after the final rate to -1. minstrel_ht already deals with this, but minstrel doesn't, which causes it to get stuck at the lowest rate on these drivers. Fix this by checking the count as well. Cc: stable@vger.kernel.org Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24mac80211: minstrel: remove deferred sampling codeFelix Fietkau
commit 4fe40b8e1566dad04c87fbf299049a1d0d4bd58d upstream. Deferring sampling attempts to the second stage has some bad interactions with drivers that process the rate table in hardware and use the probe flag to indicate probing packets (e.g. most mt76 drivers). On affected drivers it can lead to probing not working at all. If the link conditions turn worse, it might not be such a good idea to do a lot of sampling for lower rates in this case. Fix this by simply skipping the sample attempt instead of deferring it, but keep the checks that would allow it to be sampled if it was skipped too often, but only if it has less than 95% success probability. Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing packets. Cc: stable@vger.kernel.org Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24net: Have netpoll bring-up DSA management interfaceFlorian Fainelli
[ Upstream commit 1532b9778478577152201adbafa7738b1e844868 ] DSA network devices rely on having their DSA management interface up and running otherwise their ndo_open() will return -ENETDOWN. Without doing this it would not be possible to use DSA devices as netconsole when configured on the command line. These devices also do not utilize the upper/lower linking so the check about the netpoll device having upper is not going to be a problem. The solution adopted here is identical to the one done for net/ipv4/ipconfig.c with 728c02089a0e ("net: ipv4: handle DSA enabled master network devices"), with the network namespace scope being restricted to that of the process configuring netpoll. Fixes: 04ff53f96a93 ("net: dsa: Add netconsole support") Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201117035236.22658-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24sctp: change to hold/put transport for proto_unreach_timerXin Long
[ Upstream commit 057a10fa1f73d745c8e69aa54ab147715f5630ae ] A call trace was found in Hangbin's Codenomicon testing with debug kernel: [ 2615.981988] ODEBUG: free active (active state 0) object type: timer_list hint: sctp_generate_proto_unreach_event+0x0/0x3a0 [sctp] [ 2615.995050] WARNING: CPU: 17 PID: 0 at lib/debugobjects.c:328 debug_print_object+0x199/0x2b0 [ 2616.095934] RIP: 0010:debug_print_object+0x199/0x2b0 [ 2616.191533] Call Trace: [ 2616.194265] <IRQ> [ 2616.202068] debug_check_no_obj_freed+0x25e/0x3f0 [ 2616.207336] slab_free_freelist_hook+0xeb/0x140 [ 2616.220971] kfree+0xd6/0x2c0 [ 2616.224293] rcu_do_batch+0x3bd/0xc70 [ 2616.243096] rcu_core+0x8b9/0xd00 [ 2616.256065] __do_softirq+0x23d/0xacd [ 2616.260166] irq_exit+0x236/0x2a0 [ 2616.263879] smp_apic_timer_interrupt+0x18d/0x620 [ 2616.269138] apic_timer_interrupt+0xf/0x20 [ 2616.273711] </IRQ> This is because it holds asoc when transport->proto_unreach_timer starts and puts asoc when the timer stops, and without holding transport the transport could be freed when the timer is still running. So fix it by holding/putting transport instead for proto_unreach_timer in transport, just like other timers in transport. v1->v2: - Also use sctp_transport_put() for the "out_unlock:" path in sctp_generate_proto_unreach_event(), as Marcelo noticed. Fixes: 50b5d6ad6382 ("sctp: Fix a race between ICMP protocol unreachable and connect()") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/102788809b554958b13b95d33440f5448113b8d6.1605331373.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24net: x25: Increase refcnt of "struct x25_neigh" in x25_rx_call_requestXie He
[ Upstream commit 4ee18c179e5e815fa5575e0d2db0c05795a804ee ] The x25_disconnect function in x25_subr.c would decrease the refcount of "x25->neighbour" (struct x25_neigh) and reset this pointer to NULL. However, the x25_rx_call_request function in af_x25.c, which is called when we receive a connection request, does not increase the refcount when it assigns the pointer. Fix this issue by increasing the refcount of "struct x25_neigh" in x25_rx_call_request. This patch fixes frequent kernel crashes when using AF_X25 sockets. Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201112103506.5875-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24netlabel: fix an uninitialized warning in netlbl_unlabel_staticlist()Paul Moore
[ Upstream commit 1ba86d4366e023d96df3dbe415eea7f1dc08c303 ] Static checking revealed that a previous fix to netlbl_unlabel_staticlist() leaves a stack variable uninitialized, this patches fixes that. Fixes: 866358ec331f ("netlabel: fix our progress tracking in netlbl_unlabel_staticlist()") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/160530304068.15651.18355773009751195447.stgit@sifl Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24netlabel: fix our progress tracking in netlbl_unlabel_staticlist()Paul Moore
[ Upstream commit 866358ec331f8faa394995fb4b511af1db0247c8 ] The current NetLabel code doesn't correctly keep track of the netlink dump state in some cases, in particular when multiple interfaces with large configurations are loaded. The problem manifests itself by not reporting the full configuration to userspace, even though it is loaded and active in the kernel. This patch fixes this by ensuring that the dump state is properly reset when necessary inside the netlbl_unlabel_staticlist() function. Fixes: 8cc44579d1bd ("NetLabel: Introduce static network labels for unlabeled connections") Signed-off-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/160484450633.3752.16512718263560813473.stgit@sifl Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24net: bridge: add missing counters to ndo_get_stats64 callbackHeiner Kallweit
[ Upstream commit 7a30ecc9237681bb125cbd30eee92bef7e86293d ] In br_forward.c and br_input.c fields dev->stats.tx_dropped and dev->stats.multicast are populated, but they are ignored in ndo_get_stats64. Fixes: 28172739f0a2 ("net: fix 64 bit counters on 32 bit arches") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/58ea9963-77ad-a7cf-8dfd-fc95ab95f606@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24ah6: fix error return code in ah6_input()Zhang Changzhong
[ Upstream commit a5ebcbdf34b65fcc07f38eaf2d60563b42619a59 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605581105-35295-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-22mac80211: always wind down STA stateJohannes Berg
commit dcd479e10a0510522a5d88b29b8f79ea3467d501 upstream. When (for example) an IBSS station is pre-moved to AUTHORIZED before it's inserted, and then the insertion fails, we don't clean up the fast RX/TX states that might already have been created, since we don't go through all the state transitions again on the way down. Do that, if it hasn't been done already, when the station is freed. I considered only freeing the fast TX/RX state there, but we might add more state so it's more robust to wind down the state properly. Note that we warn if the station was ever inserted, it should have been properly cleaned up in that case, and the driver will probably not like things happening out of order. Reported-by: syzbot+2e293dbd67de2836ba42@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201009141710.7223b322a955.I95bd08b9ad0e039c034927cce0b75beea38e059b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18net: Update window_clamp if SOCK_RCVBUF is setMao Wenan
[ Upstream commit 909172a149749242990a6e64cb55d55460d4e417 ] When net.ipv4.tcp_syncookies=1 and syn flood is happened, cookie_v4_check or cookie_v6_check tries to redo what tcp_v4_send_synack or tcp_v6_send_synack did, rsk_window_clamp will be changed if SOCK_RCVBUF is set, which will make rcv_wscale is different, the client still operates with initial window scale and can overshot granted window, the client use the initial scale but local server use new scale to advertise window value, and session work abnormally. Fixes: e88c64f0a425 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt") Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18net/x25: Fix null-ptr-deref in x25_connectMartin Schiller
[ Upstream commit 361182308766a265b6c521879b34302617a8c209 ] This fixes a regression for blocking connects introduced by commit 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect"). The x25->neighbour is already set to "NULL" by x25_disconnect() now, while a blocking connect is waiting in x25_wait_for_connection_establishment(). Therefore x25->neighbour must not be accessed here again and x25->state is also already set to X25_STATE_0 by x25_disconnect(). Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reviewed-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201109065449.9014-1-ms@dev.tdt.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18net/af_iucv: fix null pointer dereference on shutdownUrsula Braun
[ Upstream commit 4031eeafa71eaf22ae40a15606a134ae86345daf ] syzbot reported the following KASAN finding: BUG: KASAN: nullptr-dereference in iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385 Read of size 2 at addr 000000000000021e by task syz-executor907/519 CPU: 0 PID: 519 Comm: syz-executor907 Not tainted 5.9.0-syzkaller-07043-gbcf9877ad213 #0 Hardware name: IBM 3906 M04 701 (KVM/Linux) Call Trace: [<00000000c576af60>] unwind_start arch/s390/include/asm/unwind.h:65 [inline] [<00000000c576af60>] show_stack+0x180/0x228 arch/s390/kernel/dumpstack.c:135 [<00000000c9dcd1f8>] __dump_stack lib/dump_stack.c:77 [inline] [<00000000c9dcd1f8>] dump_stack+0x268/0x2f0 lib/dump_stack.c:118 [<00000000c5fed016>] print_address_description.constprop.0+0x5e/0x218 mm/kasan/report.c:383 [<00000000c5fec82a>] __kasan_report mm/kasan/report.c:517 [inline] [<00000000c5fec82a>] kasan_report+0x11a/0x168 mm/kasan/report.c:534 [<00000000c98b5b60>] iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385 [<00000000c98b6262>] iucv_sock_shutdown+0x44a/0x4c0 net/iucv/af_iucv.c:1457 [<00000000c89d3a54>] __sys_shutdown+0x12c/0x1c8 net/socket.c:2204 [<00000000c89d3b70>] __do_sys_shutdown net/socket.c:2212 [inline] [<00000000c89d3b70>] __s390x_sys_shutdown+0x38/0x48 net/socket.c:2210 [<00000000c9e36eac>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415 There is nothing to shutdown if a connection has never been established. Besides that iucv->hs_dev is not yet initialized if a socket is in IUCV_OPEN state and iucv->path is not yet initialized if socket is in IUCV_BOUND state. So, just skip the shutdown calls for a socket in these states. Fixes: eac3731bd04c ("[S390]: Add AF_IUCV socket support") Fixes: 82492a355fac ("af_iucv: add shutdown for HS transport") Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> [jwi: correct one Fixes tag] Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18IPv6: Set SIT tunnel hard_header_len to zeroOliver Herms
[ Upstream commit 8ef9ba4d666614497a057d09b0a6eafc1e34eadf ] Due to the legacy usage of hard_header_len for SIT tunnels while already using infrastructure from net/ipv4/ip_tunnel.c the calculation of the path MTU in tnl_update_pmtu is incorrect. This leads to unnecessary creation of MTU exceptions for any flow going over a SIT tunnel. As SIT tunnels do not have a header themsevles other than their transport (L3, L2) headers we're leaving hard_header_len set to zero as tnl_update_pmtu is already taking care of the transport headers sizes. This will also help avoiding unnecessary IPv6 GC runs and spinlock contention seen when using SIT tunnels and for more than net.ipv6.route.gc_thresh flows. Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20201103104133.GA1573211@tws Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18cfg80211: regulatory: Fix inconsistent format argumentYe Bin
[ Upstream commit db18d20d1cb0fde16d518fb5ccd38679f174bc04 ] Fix follow warning: [net/wireless/reg.c:3619]: (warning) %d in format string (no. 2) requires 'int' but the argument type is 'unsigned int'. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20201009070215.63695-1-yebin10@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18mac80211: fix use of skb payload instead of headerJohannes Berg
[ Upstream commit 14f46c1e5108696ec1e5a129e838ecedf108c7bf ] When ieee80211_skb_resize() is called from ieee80211_build_hdr() the skb has no 802.11 header yet, in fact it consist only of the payload as the ethernet frame is removed. As such, we're using the payload data for ieee80211_is_mgmt(), which is of course completely wrong. This didn't really hurt us because these are always data frames, so we could only have added more tailroom than we needed if we determined it was a management frame and sdata->crypto_tx_tailroom_needed_cnt was false. However, syzbot found that of course there need not be any payload, so we're using at best uninitialized memory for the check. Fix this to pass explicitly the kind of frame that we have instead of checking there, by replacing the "bool may_encrypt" argument with an argument that can carry the three possible states - it's not going to be encrypted, it's a management frame, or it's a data frame (and then we check sdata->crypto_tx_tailroom_needed_cnt). Reported-by: syzbot+32fd1a1bfe355e93f1e2@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20201009132538.e1fd7f802947.I799b288466ea2815f9d4c84349fae697dca2f189@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18net: xfrm: fix a race condition during allocing spizhuoliang zhang
[ Upstream commit a779d91314ca7208b7feb3ad817b62904397c56d ] we found that the following race condition exists in xfrm_alloc_userspi flow: user thread state_hash_work thread ---- ---- xfrm_alloc_userspi() __find_acq_core() /*alloc new xfrm_state:x*/ xfrm_state_alloc() /*schedule state_hash_work thread*/ xfrm_hash_grow_check() xfrm_hash_resize() xfrm_alloc_spi /*hold lock*/ x->id.spi = htonl(spi) spin_lock_bh(&net->xfrm.xfrm_state_lock) /*waiting lock release*/ xfrm_hash_transfer() spin_lock_bh(&net->xfrm.xfrm_state_lock) /*add x into hlist:net->xfrm.state_byspi*/ hlist_add_head_rcu(&x->byspi) spin_unlock_bh(&net->xfrm.xfrm_state_lock) /*add x into hlist:net->xfrm.state_byspi 2 times*/ hlist_add_head_rcu(&x->byspi) 1. a new state x is alloced in xfrm_state_alloc() and added into the bydst hlist in __find_acq_core() on the LHS; 2. on the RHS, state_hash_work thread travels the old bydst and tranfers every xfrm_state (include x) into the new bydst hlist and new byspi hlist; 3. user thread on the LHS gets the lock and adds x into the new byspi hlist again. So the same xfrm_state (x) is added into the same list_hash (net->xfrm.state_byspi) 2 times that makes the list_hash become an inifite loop. To fix the race, x->id.spi = htonl(spi) in the xfrm_alloc_spi() is moved to the back of spin_lock_bh, sothat state_hash_work thread no longer add x which id.spi is zero into the hash_list. Fixes: f034b5d4efdf ("[XFRM]: Dynamic xfrm_state hash table sizing.") Signed-off-by: zhuoliang zhang <zhuoliang.zhang@mediatek.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10vsock: use ns_capable_noaudit() on socket createJeff Vander Stoep
[ Upstream commit af545bb5ee53f5261db631db2ac4cde54038bdaf ] During __vsock_create() CAP_NET_ADMIN is used to determine if the vsock_sock->trusted should be set to true. This value is used later for determing if a remote connection should be allowed to connect to a restricted VM. Unfortunately, if the caller doesn't have CAP_NET_ADMIN, an audit message such as an selinux denial is generated even if the caller does not want a trusted socket. Logging errors on success is confusing. To avoid this, switch the capable(CAP_NET_ADMIN) check to the noaudit version. Reported-by: Roman Kiryanov <rkir@google.com> https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/ Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10tipc: fix use-after-free in tipc_bcast_get_modeHoang Huu Le
commit fdeba99b1e58ecd18c2940c453e19e4ef20ff591 upstream. Syzbot has reported those issues as: ================================================================== BUG: KASAN: use-after-free in tipc_bcast_get_mode+0x3ab/0x400 net/tipc/bcast.c:759 Read of size 1 at addr ffff88805e6b3571 by task kworker/0:6/3850 CPU: 0 PID: 3850 Comm: kworker/0:6 Not tainted 5.8.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events tipc_net_finalize_work Thread 1's call trace: [...] kfree+0x103/0x2c0 mm/slab.c:3757 <- bcbase releasing tipc_bcast_stop+0x1b0/0x2f0 net/tipc/bcast.c:721 tipc_exit_net+0x24/0x270 net/tipc/core.c:112 [...] Thread 2's call trace: [...] tipc_bcast_get_mode+0x3ab/0x400 net/tipc/bcast.c:759 <- bcbase has already been freed by Thread 1 tipc_node_broadcast+0x9e/0xcc0 net/tipc/node.c:1744 tipc_nametbl_publish+0x60b/0x970 net/tipc/name_table.c:752 tipc_net_finalize net/tipc/net.c:141 [inline] tipc_net_finalize+0x1fa/0x310 net/tipc/net.c:131 tipc_net_finalize_work+0x55/0x80 net/tipc/net.c:150 [...] ================================================================== BUG: KASAN: use-after-free in tipc_named_reinit+0xef/0x290 net/tipc/name_distr.c:344 Read of size 8 at addr ffff888052ab2000 by task kworker/0:13/30628 CPU: 0 PID: 30628 Comm: kworker/0:13 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events tipc_net_finalize_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_address_description+0x66/0x5a0 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 tipc_named_reinit+0xef/0x290 net/tipc/name_distr.c:344 tipc_net_finalize+0x85/0xe0 net/tipc/net.c:138 tipc_net_finalize_work+0x50/0x70 net/tipc/net.c:150 process_one_work+0x789/0xfc0 kernel/workqueue.c:2269 worker_thread+0xaa4/0x1460 kernel/workqueue.c:2415 kthread+0x37e/0x3a0 drivers/block/aoe/aoecmd.c:1234 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 [...] Freed by task 14058: save_stack mm/kasan/common.c:48 [inline] set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x114/0x170 mm/kasan/common.c:455 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x220 mm/slab.c:3757 tipc_exit_net+0x29/0x50 net/tipc/core.c:113 ops_exit_list net/core/net_namespace.c:186 [inline] cleanup_net+0x708/0xba0 net/core/net_namespace.c:603 process_one_work+0x789/0xfc0 kernel/workqueue.c:2269 worker_thread+0xaa4/0x1460 kernel/workqueue.c:2415 kthread+0x37e/0x3a0 drivers/block/aoe/aoecmd.c:1234 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Fix it by calling flush_scheduled_work() to make sure the tipc_net_finalize_work() stopped before releasing bcbase object. Reported-by: syzbot+6ea1f7a8df64596ef4d7@syzkaller.appspotmail.com Reported-by: syzbot+e9cc557752ab126c1b99@syzkaller.appspotmail.com Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10libceph: clear con->out_msg on Policy::stateful_server faultsIlya Dryomov
commit 28e1581c3b4ea5f98530064a103c6217bedeea73 upstream. con->out_msg must be cleared on Policy::stateful_server (!CEPH_MSG_CONNECT_LOSSY) faults. Not doing so botches the reconnection attempt, because after writing the banner the messenger moves on to writing the data section of that message (either from where it got interrupted by the connection reset or from the beginning) instead of writing struct ceph_msg_connect. This results in a bizarre error message because the server sends CEPH_MSGR_TAG_BADPROTOVER but we think we wrote struct ceph_msg_connect: libceph: mds0 (1)172.21.15.45:6828 socket error on write ceph: mds0 reconnect start libceph: mds0 (1)172.21.15.45:6829 socket closed (con state OPEN) libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch, my 32 != server's 32 libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch AFAICT this bug goes back to the dawn of the kernel client. The reason it survived for so long is that only MDS sessions are stateful and only two MDS messages have a data section: CEPH_MSG_CLIENT_RECONNECT (always, but reconnecting is rare) and CEPH_MSG_CLIENT_REQUEST (only when xattrs are involved). The connection has to get reset precisely when such message is being sent -- in this case it was the former. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/47723 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10net: 9p: initialize sun_server.sun_path to have addr's value only when addr ↵Anant Thazhemadam
is valid [ Upstream commit 7ca1db21ef8e0e6725b4d25deed1ca196f7efb28 ] In p9_fd_create_unix, checking is performed to see if the addr (passed as an argument) is NULL or not. However, no check is performed to see if addr is a valid address, i.e., it doesn't entirely consist of only 0's. The initialization of sun_server.sun_path to be equal to this faulty addr value leads to an uninitialized variable, as detected by KMSAN. Checking for this (faulty addr) and returning a negative error number appropriately, resolves this issue. Link: http://lkml.kernel.org/r/20201012042404.2508-1-anant.thazhemadam@gmail.com Reported-by: syzbot+75d51fe5bf4ebe988518@syzkaller.appspotmail.com Tested-by: syzbot+75d51fe5bf4ebe988518@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10tipc: fix memory leak caused by tipc_buf_append()Tung Nguyen
[ Upstream commit ceb1eb2fb609c88363e06618b8d4bbf7815a4e03 ] Commit ed42989eab57 ("tipc: fix the skb_unshare() in tipc_buf_append()") replaced skb_unshare() with skb_copy() to not reduce the data reference counter of the original skb intentionally. This is not the correct way to handle the cloned skb because it causes memory leak in 2 following cases: 1/ Sending multicast messages via broadcast link The original skb list is cloned to the local skb list for local destination. After that, the data reference counter of each skb in the original list has the value of 2. This causes each skb not to be freed after receiving ACK: tipc_link_advance_transmq() { ... /* release skb */ __skb_unlink(skb, &l->transmq); kfree_skb(skb); <-- memory exists after being freed } 2/ Sending multicast messages via replicast link Similar to the above case, each skb cannot be freed after purging the skb list: tipc_mcast_xmit() { ... __skb_queue_purge(pkts); <-- memory exists after being freed } This commit fixes this issue by using skb_unshare() instead. Besides, to avoid use-after-free error reported by KASAN, the pointer to the fragment is set to NULL before calling skb_unshare() to make sure that the original skb is not freed after freeing the fragment 2 times in case skb_unshare() returns NULL. Fixes: ed42989eab57 ("tipc: fix the skb_unshare() in tipc_buf_append()") Acked-by: Jon Maloy <jmaloy@redhat.com> Reported-by: Thang Hoang Ngo <thang.h.ngo@dektech.com.au> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20201027032403.1823-1-tung.q.nguyen@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10SUNRPC: ECONNREFUSED should cause a rebind.NeilBrown
commit fd01b2597941d9c17980222999b0721648b383b8 upstream. If you - mount and NFSv3 filesystem - do some file locking which requires the server to make a GRANT call back - unmount - mount again and do the same locking then the second attempt at locking suffers a 30 second delay. Unmounting and remounting causes lockd to stop and restart, which causes it to bind to a new port. The server still thinks the old port is valid and gets ECONNREFUSED when trying to contact it. ECONNREFUSED should be seen as a hard error that is not worth retrying. Rebinding is the only reasonable response. This patch forces a rebind if that makes sense. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Calum Mackay <calum.mackay@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29ipvs: Fix uninit-value in do_ip_vs_set_ctl()Peilin Ye
[ Upstream commit c5a8a8498eed1c164afc94f50a939c1a10abf8ad ] do_ip_vs_set_ctl() is referencing uninitialized stack value when `len` is zero. Fix it. Reported-by: syzbot+23b5f9e7caf61d9a3898@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=46ebfb92a8a812621a001ef04d90dfa459520fe2 Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Acked-by: Julian Anastasov <ja@ssi.bg> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Bluetooth: Only mark socket zapped after unlockingAbhishek Pandit-Subedi
[ Upstream commit 20ae4089d0afeb24e9ceb026b996bfa55c983cc2 ] Since l2cap_sock_teardown_cb doesn't acquire the channel lock before setting the socket as zapped, it could potentially race with l2cap_sock_release which frees the socket. Thus, wait until the cleanup is complete before marking the socket as zapped. This race was reproduced on a JBL GO speaker after the remote device rejected L2CAP connection due to resource unavailability. Here is a dmesg log with debug logs from a repro of this bug: [ 3465.424086] Bluetooth: hci_core.c:hci_acldata_packet() hci0 len 16 handle 0x0003 flags 0x0002 [ 3465.424090] Bluetooth: hci_conn.c:hci_conn_enter_active_mode() hcon 00000000cfedd07d mode 0 [ 3465.424094] Bluetooth: l2cap_core.c:l2cap_recv_acldata() conn 000000007eae8952 len 16 flags 0x2 [ 3465.424098] Bluetooth: l2cap_core.c:l2cap_recv_frame() len 12, cid 0x0001 [ 3465.424102] Bluetooth: l2cap_core.c:l2cap_raw_recv() conn 000000007eae8952 [ 3465.424175] Bluetooth: l2cap_core.c:l2cap_sig_channel() code 0x03 len 8 id 0x0c [ 3465.424180] Bluetooth: l2cap_core.c:l2cap_connect_create_rsp() dcid 0x0045 scid 0x0000 result 0x02 status 0x00 [ 3465.424189] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 4 [ 3465.424196] Bluetooth: l2cap_core.c:l2cap_chan_del() chan 000000006acf9bff, conn 000000007eae8952, err 111, state BT_CONNECT [ 3465.424203] Bluetooth: l2cap_sock.c:l2cap_sock_teardown_cb() chan 000000006acf9bff state BT_CONNECT [ 3465.424221] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 3 [ 3465.424226] Bluetooth: hci_core.h:hci_conn_drop() hcon 00000000cfedd07d orig refcnt 6 [ 3465.424234] BUG: spinlock bad magic on CPU#2, kworker/u17:0/159 [ 3465.425626] Bluetooth: hci_sock.c:hci_sock_sendmsg() sock 000000002bb0cb64 sk 00000000a7964053 [ 3465.430330] lock: 0xffffff804410aac0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 3465.430332] Causing a watchdog bite! Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29nl80211: fix non-split wiphy informationJohannes Berg
[ Upstream commit ab10c22bc3b2024f0c9eafa463899a071eac8d97 ] When dumping wiphy information, we try to split the data into many submessages, but for old userspace we still support the old mode where this doesn't happen. However, in this case we were not resetting our state correctly and dumping multiple messages for each wiphy, which would have broken such older userspace. This was broken pretty much immediately afterwards because it only worked in the original commit where non-split dumps didn't have any more data than split dumps... Fixes: fe1abafd942f ("nl80211: re-add channel width and extended capa advertising") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200928130717.3e6d9c6bada2.Ie0f151a8d0d00a8e1e18f6a8c9244dd02496af67@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29icmp: randomize the global rate limiterEric Dumazet
[ Upstream commit b38e7819cae946e2edf869e604af1e65a5d241c5 ] Keyu Man reported that the ICMP rate limiter could be used by attackers to get useful signal. Details will be provided in an upcoming academic publication. Our solution is to add some noise, so that the attackers no longer can get help from the predictable token bucket limiter. Fixes: 4cdf507d5452 ("icmp: add a global rate limitation") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29tcp: fix to update snd_wl1 in bulk receiver fast pathNeal Cardwell
[ Upstream commit 18ded910b589839e38a51623a179837ab4cc3789 ] In the header prediction fast path for a bulk data receiver, if no data is newly acknowledged then we do not call tcp_ack() and do not call tcp_ack_update_window(). This means that a bulk receiver that receives large amounts of data can have the incoming sequence numbers wrap, so that the check in tcp_may_update_window fails: after(ack_seq, tp->snd_wl1) If the incoming receive windows are zero in this state, and then the connection that was a bulk data receiver later wants to send data, that connection can find itself persistently rejecting the window updates in incoming ACKs. This means the connection can persistently fail to discover that the receive window has opened, which in turn means that the connection is unable to send anything, and the connection's sending process can get permanently "stuck". The fix is to update snd_wl1 in the header prediction fast path for a bulk data receiver, so that it keeps up and does not see wrapping problems. This fix is based on a very nice and thorough analysis and diagnosis by Apollon Oikonomopoulos (see link below). This is a stable candidate but there is no Fixes tag here since the bug predates current git history. Just for fun: looks like the bug dates back to when header prediction was added in Linux v2.1.8 in Nov 1996. In that version tcp_rcv_established() was added, and the code only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer: receiver" code path it does not call tcp_ack(). This fix seems to apply cleanly at least as far back as v3.2. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reported-by: Apollon Oikonomopoulos <apoikos@dmesg.gr> Tested-by: Apollon Oikonomopoulos <apoikos@dmesg.gr> Link: https://www.spinics.net/lists/netdev/msg692430.html Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in ↵Defang Bo
nfc_genl_fw_download() [ Upstream commit 280e3ebdafb863b3cb50d5842f056267e15bf40c ] Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by the netlink client prior to accessing them.This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Similar to commit a0323b979f81 ("nfc: Ensure presence of required attributes in the activate_target handler"). Fixes: 9674da8759df ("NFC: Add firmware upload netlink command") Signed-off-by: Defang Bo <bodefang@126.com> Link: https://lore.kernel.org/r/1603107538-4744-1-git-send-email-bodefang@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29tipc: fix the skb_unshare() in tipc_buf_append()Cong Wang
[ Upstream commit ed42989eab57d619667d7e87dfbd8fe207db54fe ] skb_unshare() drops a reference count on the old skb unconditionally, so in the failure case, we end up freeing the skb twice here. And because the skb is allocated in fclone and cloned by caller tipc_msg_reassemble(), the consequence is actually freeing the original skb too, thus triggered the UAF by syzbot. Fix this by replacing this skb_unshare() with skb_cloned()+skb_copy(). Fixes: ff48b6222e65 ("tipc: use skb_unshare() instead in tipc_buf_append()") Reported-and-tested-by: syzbot+e96a7ba46281824cc46a@syzkaller.appspotmail.com Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-17Bluetooth: Disconnect if E0 is used for Level 4Luiz Augusto von Dentz
commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream. E0 is not allowed with Level 4: BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319: '128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened' SC enabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) Secure Connections (Host Support) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with AES-CCM (0x02) SC disabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with E0 (0x01) [May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 256 Reason: Authentication Failure (0x05) Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-17Bluetooth: Consolidate encryption handling in hci_encrypt_cfmLuiz Augusto von Dentz
commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream. This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection state is BT_CONFIG so callers don't have to check the state. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 07:02:12 +0000