summaryrefslogtreecommitdiff
path: root/scripts/dtc
AgeCommit message (Collapse)Author
2021-05-02.gitignore: prefix local generated files with a slashMasahiro Yamada
The pattern prefixed with '/' matches files in the same directory, but not ones in sub-directories. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Andra Paraschiv <andraprs@amazon.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>
2021-03-05Merge tag 'devicetree-fixes-for-5.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Another batch of graph and video-interfaces schema conversions - Drop DT header symlink for dropped C6X arch - Fix bcm2711-hdmi schema error * tag 'devicetree-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: media: Use graph and video-interfaces schemas, round 2 dts: drop dangling c6x symlink dt-bindings: bcm2711-hdmi: Fix broken schema
2021-02-23dts: drop dangling c6x symlinkMichal Kubecek
With c6x architecture removal, scripts/dtc/include-prefixes/c6x symlink lost its target. Drop the dangling symlink which triggers some distribution check scripts. Fixes: a579fcfa8e49 ("c6x: remove architecture") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210223204114.E7F55E0155@unicorn.suse.cz
2021-02-23scripts/dtc: Add missing fdtoverlay to gitignoreRob Herring
Commit 0da6bcd9fcc0 ("scripts: dtc: Build fdtoverlay tool") enabled building fdtoverlay, but failed to add it to .gitignore. Also add a note to keep hostprogs in sync with .gitignore. Fixes: 0da6bcd9fcc0 ("scripts: dtc: Build fdtoverlay tool") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2021-02-04scripts: dtc: Remove the unused fdtdump.c fileViresh Kumar
This was copied from external DTC repository long back and isn't used anymore. Over that the dtc tool can be used to generate the dts source back from the dtb. Remove the unused fdtdump.c file. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/7ea1a9e7fd5d75b7adfc2a4c40dde2d4ea3fddf8.1611904394.git.viresh.kumar@linaro.org
2021-02-04scripts: dtc: Build fdtoverlay toolViresh Kumar
We will start building overlays for platforms soon in the kernel and would need fdtoverlay going forward. Lets start building it. The fdtoverlay program applies one or more overlay dtb blobs to a base dtb blob. The kernel build system would later use fdtoverlay to generate the overlaid blobs based on platform specific configurations. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/4a201dea3ba11a00cab7e936dfc1140dac1a1ae3.1611904394.git.viresh.kumar@linaro.org
2021-02-04scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9Rob Herring
This adds the following commits from upstream: 183df9e9c2b9 gitignore: Ignore the swp files 0db6d09584e1 gitignore: Add cscope files 307afa1a7be8 Update Jon Loeliger's email ca16a723fa9d fdtdump: Fix gcc11 warning 64990a272e8f srcpos: increase MAX_SRCFILE_DEPTH 163f0469bf2e dtc: Allow overlays to have .dtbo extension 3b01518e688d Set last_comp_version correctly in new dtb and fix potential version issues in fdt_open_into f7e5737f26aa tests: Fix overlay_overlay_nosugar test case 7cd5d5fe43d5 libfdt: Tweak description of assume-aligned load helpers a7c404099349 libfdt: Internally perform potentially unaligned loads bab85e48a6f4 meson: increase default timeout for tests f8b46098824d meson: do not assume python is installed, skip tests 30a56bce4f0b meson: fix -Wall warning 5e735860c478 libfdt: Check for 8-byte address alignment in fdt_ro_probe_() 67849a327927 build-sys: add meson build 05874d08212d pylibfdt: allow build out of tree 3bc3a6b9fe0c dtc: Fix signedness comparisons warnings: Wrap (-1) e1147b159e92 dtc: Fix signedness comparisons warnings: change types 04cf1fdc0fcf convert-dtsv0: Fix signedness comparisons warning b30013edb878 libfdt: Fix kernel-doc comments Signed-off-by: Rob Herring <robh@kernel.org>
2021-02-03scripts: dtc: Fetch fdtoverlay.c from external DTC projectViresh Kumar
We will start building overlays for platforms soon in the kernel and would need fdtoverlay tool going forward. Lets start fetching it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/28f66f70602225bb6aeb58e924c20bde9d864327.1611904394.git.viresh.kumar@linaro.org
2020-10-12scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121Rob Herring
This adds the following commits from upstream: cbca977ea121 checks: Allow PCI bridge child nodes without an address 73e0f143b73d libfdt: fdt_strerror(): Fix comparison warning 6c2be7d85315 libfdt: fdt_get_string(): Fix sequential write comparison warnings 82525f41d59e libfdt: libfdt_wip: Fix comparison warning fb1f65f15832 libfdt: fdt_create_with_flags(): Fix comparison warning f28aa271000b libfdt: fdt_move(): Fix comparison warnings 3d7c6f44195a libfdt: fdt_add_string_(): Fix comparison warning 10f682788c30 libfdt: fdt_node_offset_by_phandle(): Fix comparison warning 07158f4cf2a2 libfdt: overlay: Fix comparison warning ce9e1f25a7de libfdt: fdt_resize(): Fix comparison warning faa76fc10bc5 libfdt: fdt_splice_(): Fix comparison warning 54dca0985316 libfdt: fdt_get_string(): Fix comparison warnings f8e11e61624e libfdt: fdt_grab_space_(): Fix comparison warning 0c43d4d7bf5a libfdt: fdt_mem_rsv(): Fix comparison warnings 442ea3dd1579 libfdt: fdt_offset_ptr(): Fix comparison warnings ca19c3db2bf6 Makefile: Specify cflags for libyaml 7bb86f1c0956 libfdt: fix fdt_check_node_offset_ w/ VALID_INPUT 3d522abc7571 dtc: Include stdlib.h in util.h 808cdaaf524f dtc: Avoid UB when shifting 3e3138b4a956 libfdt: fix fdt_check_full buffer overrun Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-06Merge branch 'dt/linus' into dt/nextRob Herring
2020-09-29scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwritingUwe Kleine-König
When building with $ HOST_EXTRACFLAGS=-g make the expectation is that host tools are built with debug informations. This however doesn't happen if the Makefile assigns a new value to the HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for the first assignment. Fixes: e3fd9b5384f3 ("scripts/dtc: consolidate include path options in Makefile") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-19scripts/dtc: dtx_diff - make help text formatting consistentGeert Uytterhoeven
None of the help texts use capitalization, except the one for the -T option. Drop the capitalization for consistency. Split the single long line that doesn't fit in 80 characters. Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200819124709.20401-1-geert+renesas@glider.be
2020-08-10kbuild: introduce hostprogs-always-y and userprogs-always-yMasahiro Yamada
To build host programs, you need to add the program names to 'hostprogs' to use the necessary build rule, but it is not enough to build them because there is no dependency. There are two types of host programs: built as the prerequisite of another (e.g. gen_crc32table in lib/Makefile), or always built when Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile). The latter is typical in Makefiles under scripts/, which contains host programs globally used during the kernel build. To build them, you need to add them to both 'hostprogs' and 'always-y'. This commit adds hostprogs-always-y as a shorthand. The same applies to user programs. net/bpfilter/Makefile builds bpfilter_umh on demand, hence always-y is unneeded. In contrast, programs under samples/ are added to both 'userprogs' and 'always-y' so they are always built when Kbuild visits the Makefiles. userprogs-always-y works as a shorthand. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2020-06-30scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19cRob Herring
Sync with upstream dtc primarily to pickup the I2C bus check fixes. The interrupt_provider check is noisy, so turn it off for now. This adds the following commits from upstream: 9d7888cbf19c dtc: Consider one-character strings as strings 8259d59f59de checks: Improve i2c reg property checking fdabcf2980a4 checks: Remove warning for I2C_OWN_SLAVE_ADDRESS 2478b1652c8d libfdt: add extern "C" for C++ f68bfc2668b2 libfdt: trivial typo fix 7be250b4d059 libfdt: Correct condition for reordering blocks 81e0919a3e21 checks: Add interrupt provider test 85e5d839847a Makefile: when building libfdt only, do not add unneeded deps b28464a550c5 Fix some potential unaligned accesses in dtc Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-08scripts/dtc: use pkg-config to include <yaml.h> in non-standard pathMasahiro Yamada
Commit 067c650c456e ("dtc: Use pkg-config to locate libyaml") added 'pkg-config --libs' to link libyaml installed in a non-standard location. yamltree.c includes <yaml.h>, but that commit did not add the search path for <yaml.h>. If /usr/include/yaml.h does not exist, it fails to build. A user can explicitly pass HOSTCFLAGS to work around it, but the policy is not consistent. There are two ways to deal with libraries in a non-default location. [1] Use HOSTCFLAGS and HOSTLDFLAGS for additional search paths for headers and libraries. They are documented in Documentation/kbuild/kbuild.rst $ make HOSTCFLAGS='-I <prefix>/include' HOSTLDFLAGS='-L <prefix>/lib' [2] Use pkg-config 'pkg-config --cflags' for querying the header search path 'pkg-config --libs' for querying the lib and its path If we go with pkg-config, use [2] consistently. Do not mix up [1] and [2]. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-17kbuild: check libyaml installation for 'make dt_binding_check'Masahiro Yamada
If you run 'make dtbs_check' without installing the libyaml package, the error message "dtc needs libyaml ..." is shown. This should be checked also for 'make dt_binding_check' because dtc needs to validate *.example.dts extracted from *.yaml files. It is missing since commit 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks"), but this fix-up is applicable only after commit e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check in a single command"). I gave the Fixes tag to the latter in case somebody is interested in back-porting this. Fixes: e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check in a single command") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-04-02Merge tag 'devicetree-for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...
2020-03-31Merge tag 'kbuild-v5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Build system: - add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a fixed set of export symbols for Generic Kernel Image (GKI) - allow to run 'make dt_binding_check' without .config - use full schema for checking DT examples in *.yaml files - make modpost fail for missing MODULE_IMPORT_NS(), which makes more sense because we know the produced modules are never loadable - Remove unused 'AS' variable Kconfig: - sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files - relax the 'imply' behavior so that symbols implied by 'y' can become 'm' - make 'imply' obey 'depends on' in order to make 'imply' really weak Misc: - add documentation on building the kernel with Clang/LLVM - revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen() - fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n - various script and Makefile cleanups" * tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) Makefile: Update kselftest help information kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset kbuild: add outputmakefile to no-dot-config-targets kbuild: remove AS variable net: wan: wanxl: refactor the firmware rebuild rule net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware kbuild: add comment about grouped target kbuild: add -Wall to KBUILD_HOSTCXXFLAGS kconfig: remove unused variable in qconf.cc sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc kbuild: refactor Makefile.dtbinst more kbuild: compute the dtbs_install destination more simply Makefile: disallow data races on gcc-10 as well kconfig: make 'imply' obey the direct dependency kconfig: allow symbols implied by y to become m net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report() modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n modpost: rework and consolidate logging interface kbuild: allow to run dt_binding_check without kernel configuration ...
2020-03-27scripts/dtc: Remove redundant YYLOC global declarationDirk Mueller
gcc 10 will default to -fno-common, which causes this error at link time: (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here This is because both dtc-lexer as well as dtc-parser define the same global symbol yyloc. Before with -fcommon those were merged into one defintion. The proper solution would be to to mark this as "extern", however that leads to: dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls] 26 | extern YYLTYPE yylloc; | ^~~~~~ In file included from dtc-lexer.l:24: dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here 127 | extern YYLTYPE yylloc; | ^~~~~~ cc1: all warnings being treated as errors which means the declaration is completely redundant and can just be dropped. Signed-off-by: Dirk Mueller <dmueller@suse.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [robh: cherry-pick from upstream] Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-13scripts/dtc: Update to upstream version v1.6.0-2-g87a656ae5ff9Rob Herring
This adds the following commits from upstream: 87a656ae5ff9 check: Inform about missing ranges 73d6e9ecb417 libfdt: fix undefined behaviour in fdt_splice_() 2525da3dba9b Bump version to v1.6.0 62cb4ad286ff Execute tests on FreeBSD with Cirrus CI 1f9a41750883 tests: Allow running the testsuite on already installed binary / libraries c5995ddf4c20 tests: Honour NO_YAML make variable e4ce227e89d7 tests: Properly clean up .bak file from tests 9b75292c335c tests: Honour $(NO_PYTHON) flag from Makefile in run_tests.sh 6c253afd07d4 Encode $(NO_PYTHON) consistently with other variables 95ec8ef706bd tests: No need to explicitly pass $PYTHON from Make to run_tests.sh 2b5f62d109a2 tests: Let run_tests.sh run Python tests without Makefile assistance 76b43dcbd18a checks: Add 'dma-ranges' check e5c92a4780c6 libfdt: Use VALID_INPUT for FDT_ERR_BADSTATE checks e5cc26b68bc0 libfdt: Add support for disabling internal checks 28fd7590aad2 libfdt: Improve comments in some of the assumptions fc207c32341b libfdt: Fix a few typos 0f61c72dedc4 libfdt: Allow exclusion of fdt_check_full() f270f45fd5d2 libfdt: Add support for disabling ordering check/fixup c18bae9a4c96 libfdt: Add support for disabling version checks fc03c4a2e04e libfdt: Add support for disabling rollback handling 77563ae72b7c libfdt: Add support for disabling sanity checks 57bc6327b80b libfdt: Add support for disabling dtb checks 464962489dcc Add a way to control the level of checks in the code 0c5326cb2845 libfdt: De-inline fdt_header_size() cc6a5a071504 Revert "yamltree: Ensure consistent bracketing of properties with phandles" 0e9225eb0dfe Remove redundant YYLOC global declaration cab09eedd644 Move -DNO_VALGRIND into CPPFLAGS 0eb1cb0b531e Makefile: pass $(CFLAGS) also during dependency generation Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-13scripts/dtc: Remove unused makefile fragmentsRob Herring
The Makefile.dtc and Makefile.libfdt fragments from upstream dtc aren't used by the kernel build, so let's remove them and stop syncing them. Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-13kbuild: allow to run dt_binding_check without kernel configurationMasahiro Yamada
The dt_binding_check target is located outside of the 'ifneq ($(dtstree),) ... endif' block. So, you can run 'make dt_binding_check' on any architecture. This makes a perfect sense because the dt-schema is arch-agnostic. The only one problem I see is that scripts/dtc/dtc is not always built. For example, ARCH=x86 defconfig does not define CONFIG_DTC. Kbuild descends into scripts/dtc/ with doing nothing. Then, it fails to build *.example.dt.yaml files. Let's build scripts/dtc/dtc forcibly when running dt_binding_check. The dt-schema does not depend on any CONFIG option either, so you should be able to run dt_binding_check without the .config file. Going forward, you can directly run 'make dt_binding_check' in a pristine source tree. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org>
2020-02-04kbuild: rename hostprogs-y/always to hostprogs/always-yMasahiro Yamada
In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-28scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties ↵Rob Herring
with phandles" This reverts upstream commit 18d7b2f4ee45fec422b7d82bab0b3c762ee907e4. A revert in upstream dtc is pending. This commit didn't work for properties such as 'interrupt-map' that have phandle in the middle of an entry. It would also not work for a 0 or -1 phandle value that acts as a NULL. Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-26scripts/dtc: Update to upstream version v1.5.1-22-gc40aeb60b47aRob Herring
This adds the following commits from upstream: c40aeb60b47a travis.yml: Run tests on the non-x86 builders, too 9f86aff444f4 Add .cirrus.yml for FreeBSD build 34c82275bae6 Avoid gnu_printf attribute when using Clang 743000931bc9 tests: default to 'cc' if CC not set adcd676491cc Add test-case for trailing zero d9c55f855b65 Remove trailing zero from the overlay path 7a22132c79ec pylibfdt: Adjust for deprecated test methods dbe80d577ee2 tests: add extension to sed -i for GNU/BSD sed compatibility af57d440d887 libfdt: Correct prototype for fdt_ro_probe_() 6ce585ac153b Use correct inttypes.h format specifier 715028622547 support byacc in addition to bison fdf3f6d897ab pylibfdt: Correct the type for fdt_property_stub() 430419c28100 tests: fix some python warnings 588a29ff2e4e util: use gnu_printf format attribute bc876708ab1d fstree: replace lstat with stat 4c3c4ccb9916 dumptrees: pass outputdir as first argument aa522da9fff6 tests: allow out-of-tree test run 0d0d0fa51b1f fdtoverlay: Return non-zero exit code if overlays can't be applied 4605eb047b38 Add .editorconfig 18d7b2f4ee45 yamltree: Ensure consistent bracketing of properties with phandles 67f790c1adcc libfdt.h: add explicit cast from void* to uint8_t* in fdt(32|64)_st b111122ea5eb pylibfdt: use python3 shebang 60e0db3d65a1 Ignore phandle properties in /aliases 95ce19c14064 README: update for Python 3 5345db19f615 livetree: simplify condition in get_node_by_path b8d6eca78210 libfdt: Allow #size-cells of 0 184f51099471 Makefile: Add EXTRA_CFLAGS variable 812b1956a076 libfdt: Tweak data handling to satisfy Coverity 5c715a44776a fdtoverlay: Ignore symbols in overlays which don't apply to the target tree b99353474850 fdtoverlay: Allow adding labels to __overlay__ nodes in overlays d6de81b81b68 pylibfdt: Add support for fdt_get_alias() 1c17714dbb3a pylibfdt: Correct the FdtSw example ad57e4574a37 tests: Add a failed test case for 'fdtoverlay' with long target path bbe3b36f542b fdtoverlay: Rework output allocation 6c2e61f08396 fdtoverlay: Improve error messages 297f5abb362e fdtoverlay: Check for truncated overlay blobs Cc: Frank Rowand <frowand.list@gmail.com> Cc: clang-built-linux@googlegroups.com Signed-off-by: Rob Herring <robh@kernel.org>
2019-11-04dtc: Use pkg-config to locate libyamlPavel Modilaynen
Using Makefile's wildcard with absolute path to detect the presence of libyaml results in false-positive detection when cross-compiling e.g. in yocto environment. The latter results in build error: | scripts/dtc/yamltree.o: In function `yaml_propval_int': | yamltree.c: undefined reference to `yaml_sequence_start_event_initialize' | yamltree.c: undefined reference to `yaml_emitter_emit' | yamltree.c: undefined reference to `yaml_scalar_event_initialize' ... Use pkg-config to locate libyaml to address this scenario. Signed-off-by: Pavel Modilaynen <pavel.modilaynen@axis.com> [robh: silence stderr] Signed-off-by: Rob Herring <robh@kernel.org>
2019-11-04scripts/dtc: dtx_diff - add color output supportGeert Uytterhoeven
Add new -c/--color options, to enhance the diff output with color, and improve the user's experience. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Tested-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-11Merge tag 'devicetree-for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - DT binding schema examples are now validated against the schemas. Various examples are fixed due to that. - Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73 - Initial schemas for networking bindings. This includes ethernet, phy and mdio common bindings with several Allwinner and stmmac converted to the schema. - Conversion of more Arm top-level SoC/board bindings to DT schema - Conversion of PSCI binding to DT schema - Rework Arm CPU schema to coexist with other CPU schemas - Add a bunch of missing vendor prefixes and new ones for SoChip, Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif - Add Mediatek UART RX wakeup support to binding - Add reset to ST UART binding - Remove some Linuxisms from the endianness common-properties.txt binding - Make the flattened DT read-only after init - Ignore disabled reserved memory nodes - Clean-up some dead code in FDT functions * tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits) dt-bindings: vendor-prefixes: add Sipeed dt-bindings: vendor-prefixes: add SoChip dt-bindings: 83xx-512x-pci: Drop cell-index property dt-bindings: serial: add documentation for Rx in-band wakeup support dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema of: unittest: simplify getting the adapter of a client of/fdt: pass early_init_dt_reserve_memory_arch() with bool type nomap of/platform: Drop superfluous cast in of_device_make_bus_id() dt-bindings: usb: ehci: Fix example warnings dt-bindings: net: Use phy-mode instead of phy-connection-type dt-bindings: simple-framebuffer: Add requirement for pipelines dt-bindings: display: Fix simple-framebuffer example dt-bindings: net: mdio: Add child nodes dt-bindings: net: mdio: Add address and size cells dt-bindings: net: mdio: Add a nodename pattern dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' property dt-bindings: arm: Limit cpus schema to only check Arm 'cpu' nodes dt-bindings: backlight: lm3630a: correct schema validation dt-bindings: net: dwmac: Deprecate the PHY reset properties dt-bindings: net: sun8i-emac: Convert the binding to a schemas ...
2019-06-21scripts/dtc: Update to upstream version v1.5.0-30-g702c1b6c0e73Rob Herring
Pull in SPDX tag conversion from upstream dtc. This will replace the conversion done in the kernel tree copy in v5.2-rc2. This adds the following commits from upstream: 702c1b6c0e73 README.license: Update to reflect SPDX tag usage 4097bbffcf1d dtc: Add GPLv2 SPDX tags to files missing license text 94f87cd5b7c5 libfdt: Add dual GPL/BSD SPDX tags to files missing license text c4ffc05574b1 tests: Replace license boilerplate with SPDX tags a5ac29baacd2 pylibfdt: Replace dual GPLv2/BSD license boilerplate with SPDX tags 7fb0f4db2eb7 libfdt: Replace GPL/BSD boilerplate/reference with SPDX tags acfe84f2c47e dtc: Replace GPLv2 boilerplate/reference with SPDX tags Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 473Thomas Gleixner
Based on 1 normalized pattern(s): this file is subject to the terms and conditions of the gnu general public license v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081203.508532280@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-12scripts/dtc: Update to upstream version v1.5.0-23-g87963ee20693Rob Herring
This adds the following commits from upstream: 87963ee20693 livetree: add missing type markers in generated overlay properties 825146d13dc0 Fix typos in various documentation and source files 25bb080c18d1 Update the GPL2 text to the latest revision 243176c4ce84 Fix bogus error on rebuild ce01b21098a4 libfdt: Add FDT_CREATE_FLAG_NO_NAME_DEDUP flag that trades size for speed fbb62754ce45 libfdt: Introduce fdt_create_with_flags() 228a44cce857 libfdt: Ensure fdt_add_property frees allocated name string on failure 8f695676227b Avoid assertion in check_interrupts_property() 5c3513f68921 Link tools and tests against libfdt shared library 00f9febf9c16 tests: Rename tests.sh to testutils.sh c5d45188f923 Clean up LDLIBS handling 6ef8fcd05b74 Rebuild libfdt shared object if versioning linker script changes 26ee65a16c38 Use Python3 by default cca6546244cb libfdt: Make fdt_get_max_phandle() an inline 730875016a6a libfdt: Add phandle generation helper 7dfb61ba96b1 libfdt: Use fdt_find_max_phandle() 2bc5b66d7f6c libfdt: Add new maximum phandle lookup function 7fcf8208b8a9 libfdt: add fdt_append_addrrange() ae795b2db7a4 checks: Do not omit nodes with labels if symbol generation is requested eac2ad495b29 Update version.lds again f67b47135523 Revert "libfdt: Add phandle generation helper" 54ea41c22415 libfdt: Add phandle generation helper 4762ad051ee0 checks: Fix spelling in check_graph_endpoint d37f6b20107e Bump version to v1.5.0 a4b1a307ff3a pylibfdt:tests: Extend the way how to find a Python module 625dd8aaf20f pylibfdt: Change how passing tests are recognized 364631626bb7 pylibfdt: Test fdt.setprop take bytes on Python 3, add error handling cb0f454f73cc pylibfdt: check_err accepts only integer as a first argument. 4b68c6b3605a pylibfdt: Proper handling of bytes/unicode strings and octal literals 78e113e81c9d Use PRIxPTR for printing uintptr_t values ea7a8f6dad67 libfdt: Fix FDT_ERR_NOTFOUND typos in documentation 5aafd7ca43e0 libfdt: Fix fdt_getprop_by_offset() parameter name in documentation 7cbc550f903b checks: Add unit address check if node is enabled Signed-off-by: Rob Herring <robh@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-18treewide: prefix header search paths with $(srctree)/Masahiro Yamada
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-28of: add dtc annotations functionality to dtx_diffFrank Rowand
Add -T and --annotations command line arguments to dtx_diff. These arguments will be passed through to dtc. dtc will then add source location annotations to its output. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-13Merge branch 'yaml-bindings-for-v4.21' into dt/nextRob Herring
2018-12-13kbuild: Add support for DT binding schema checksRob Herring
This adds the build infrastructure for checking DT binding schema documents and validating dts files using the binding schema. Check DT binding schema documents: make dt_binding_check Build dts files and check using DT binding schema: make dtbs_check Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to use for validation. This makes it easier to find and fix errors generated by a specific schema. Currently, the validation targets are separate from a normal build to avoid a hard dependency on the external DT schema project and because there are lots of warnings generated. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-28scripts/dtc: Update to upstream version v1.4.7-57-gf267e674d145Rob Herring
This adds the following commits from upstream: f267e674d145 checks: Fix crash with multiple source annotations 3616b9a811b6 checks: Use source position information for check failures 2bdbd07a1223 checks: Make each message output atomic a1eff70c02cf util: Add xa{v}sprintf_append functions 82a52ce4573b libfdt: Add a test for fdt_getprop_by_offset() 607b8586b383 PEP8 / Flake8 cleanups for setup.py f9c0a425b648 Remove broken objdir / srcdir support 5182b5e6f28c pylibfdt: Use common PREFIX variable d45bf1f5f2a6 Refine make tests_clean target 99284c4db9cb Refine pylibfdt_clean target a4629cfaedfb Refine libfdt_clean target 08380fc43aa2 tests: Use modern octal literals for Python 8113c00b99d3 pylibfdt: Allow switch to Python 3 via environment variable PYTHON 11738cf01f15 libfdt: Don't use memcpy to handle unaligned reads on ARM 86a288a73670 checks: Restructure check_msg to decrease indentation 5667e7ef9a9a annotations: add the annotation functionality 8e20ccf52f90 annotations: add positions ca930e20bb54 tests: Don't lose errors from make checkm 43366bb4eeee tests: Property count valgrind errors in wrapped tests 5062516fb8cb srcpos: Remove srcpos_empty a3143fafbf83 Revert "annotations: add positions" 403cc79f06a1 checks: Update SPI bus check for 'spi-slave' baa1d2cf7894 annotations: add positions ff2ad38f6a5a Merge remote-tracking branch 'origin/pr/18' aa7254d9cb17 libfdt: return correct value if #size-cells property is not present 49903aed7783 use ptrdiff_t modifier for printing pointer differences da2b691ccf68 treesource: Fix dts output for phandles in middle of a sequence of ints 8f8b77a0d62d tests: Wrap check_align() calls with base_run_test() 522d81d572f2 Fix dts output with a REF_PATH marker e45198c98359 Added test cases for target references 0fcffda15e9f Merge nodes with local target label references 1e4a0928f3b3 pylibfdt: Don't have setup.py depend on where it's invoked from ca399b14956f pylibfdt: Eliminate run_setup make function 98972f1b3e33 pylibfdt: Improved version extraction 7ba2be6cda5f pylibfdt: Don't silence setup.py when V=1 7691f9d39301 pylibfdt: Make SETUP make variable 855b9963def9 pylibfdt: Simpler CFLAGS handling 47cafbeeb977 pylibfdt: Link extension module with libfdt rather than rebuilding dd695d6afb19 pylibfdt: Correctly set build output directory 59327523d0d8 pylibfdt: We don't need include files from the base directory e84742aa7b93 checks: fix simple-bus compatible matching 8c59a97ce096 Fix missing labels when emitting dts format d448f9a5fd94 Revert dts output formatting changes of spaces around brackets Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-04Merge branch 'all-dtbs' into dt/nextRob Herring
2018-10-02kbuild: consolidate Devicetree dtb build rulesRob Herring
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Paul Burton <paul.burton@mips.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-20scripts/dtc: Update to upstream version v1.4.7-14-gc86da84d30e4Rob Herring
Major changes are I2C and SPI bus checks, YAML output format (for future validation), some new libfdt functions, and more libfdt validation of dtbs. The YAML addition adds an optional dependency on libyaml. pkg-config is used to test for it and pkg-config became a kconfig dependency in 4.18. This adds the following commits from upstream: c86da84d30e4 Add support for YAML encoded output 361b5e7d8067 Make type_marker_length helper public bfbfab047e45 pylibfdt: Add a means to add and delete notes 9005f4108e7c pylibfdt: Allow delprop() to return errors b94c056b137e Make valgrind optional fd06c54d4711 tests: Better testing of dtc -I fs mode c3f50c9a86d9 tests: Allow dtbs_equal_unordered to ignore mem reserves 0ac9fdee37c7 dtc: trivial '-I fs -O dts' test 0fd1c8c783f3 pylibfdt: fdt_get_mem_rsv returns 2 uint64_t values 04853cad18f4 pylibfdt: Don't incorrectly / unnecessarily override uint64_t typemap 9619c8619c37 Kill bogus TYPE_BLOB marker type ac68ff92ae20 parser: add TYPE_STRING marker to path references 90a190eb04d9 checks: add SPI bus checks 53a1bd546905 checks: add I2C bus checks 88f18909db73 dtc: Bump version to v1.4.7 85bce8b2f06d tests: Correction to vg_prepare_blob() 57f7f9e7bc7c tests: Don't call memcmp() with NULL arguments c12b2b0c20eb libfdt: fdt_address_cells() and fdt_size_cells() 3fe0eeda0b7f livetree: Set phandle properties type to uint32 853649acceba pylibfdt: Support the sequential-write interface 9b0e4fe26093 tests: Improve fdt_resize() tests 1087504bb3e8 libfdt: Add necessary header padding in fdt_create() c72fa777e613 libfdt: Copy the struct region in fdt_resize() 32b9c6130762 Preserve datatype markers when emitting dts format 6dcb8ba408ec libfdt: Add helpers for accessing unaligned words 42607f21d43e tests: Fix incorrect check name 'prop_name_chars' 9d78c33bf8a1 tests: fix grep for checks error messages b770f3d1c13f pylibfdt: Support setting the name of a node 2f0d07e678e0 pylibfdt: Add functions to set and get properties as strings 354d3dc55939 pylibfdt: Update the bytearray size with pack() 3c374d46acce pylibfdt: Allow reading integer values from properties 49d32ce40bb4 pylibfdt: Use an unsigned type for fdt32_t 481246a0c13a pylibfdt: Avoid accessing the internal _fdt member in tests 9aafa33d99ed pylibfdt: Add functions to update properties 5a598671fdbf pylibfdt: Support device-tree creation/expansion 483e170625e1 pylibfdt: Add support for reading the memory reserve map 29bb05aa4200 pylibfdt: Add support for the rest of the header functions 582a7159a5d0 pylibfdt: Add support for fdt_next_node() f0f8c9169819 pylibfdt: Reorder functions to match libfdt.h 64a69d123935 pylibfdt: Return string instead of bytearray from getprop() 4d09a83420df fdtput: Add documentation e617cbe1bd67 fdtget: Add documentation 180a93924014 Use <inttypes.h> format specifiers in a bunch of places we should b9af3b396576 scripts/dtc: Fixed format mismatch in fprintf 4b8fcc3d015c libfdt: Add fdt_check_full() function c14223fb2292 tests: Use valgrind client requests for better checking 5b67d2b955a3 tests: Better handling of valgrind errors saving blobs e2556aaeb506 tests: Remove unused #define fb9c6abddaa8 Use size_t for blob lengths in utilfdt_read* 0112fda03bf6 libfdt: Add fdt_header_size() 6473a21d8bfe Consolidate utilfdt_read_len() variants d5db5382c5e5 libfdt: Safer access to memory reservations 719d582e98ec libfdt: Propagate name errors in fdt_getprop_by_offset() 70166d62a27f libfdt: Safer access to strings section eb890c0f77dc libfdt: Make fdt_check_header() more thorough 899d6fad93f3 libfdt: Improve sequential write state checking 04b5b4062ccd libfdt: Clean up header checking functions 44d3efedc816 Preserve datatype information when parsing dts f0be81bd8de0 Make Property a subclass of bytearray 24b1f3f064d4 pylibfdt: Add a method to access the device tree directly Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-19scripts/dtc: Add yamltree.c to dtc sourcesRob Herring
dtc has a new source file, yamltree.c, that needs to be copied when syncing dtc sources. Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-22scripts/dtc: consolidate include path options in MakefileMasahiro Yamada
It is tedious to specify extra compiler options for every file. HOST_EXTRACFLAGS is useful to add options to all files in a directory. -I$(src)/libfdt is needed for all the files in this directory to include libfdt_env.h etc. from scripts/dtc/libfdt/. On the other hand, -I$(src) is used to include check-in headers from generated C files. Thus, I added it only to dtc-lexer.lex.o and dtc-parser.tab.o . Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-05-14scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bcRob Herring
This adds the following commits from upstream: 84e414b0b5bc tests: Add a test case for the omit-if-no-ref keyword 4038fd90056e dtc: add ability to make nodes conditional on them being referenced e1f139ea4900 checks: drop warning for missing PCI bridge bus-range f4eba68d89ee checks: Print duplicate node name instead of parent name 46df1fb1b211 .travis.yml: Run valgrind checks via Travis 14a3002a1aee tests: Update valgrind suppressions for sw_tree1 02c5fe9debc0 tests: Remove valgrind error from tests/get_path df536831d02c checks: add graph binding checks 2347c96edcbe checks: add a check for duplicate unit-addresses of child nodes 8f1b35f88395 Correct overlay syntactic sugar for generating target-path fragments afbddcd418fb Suppress warnings on overlay fragments 119e27300359 Improve tests for dtc overlay generation Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-24dtc: checks: drop warning for missing PCI bridge bus-rangeRob Herring
Cherry-picked from dtc upstream commit e1f139ea4900fd0324c646822b4061fec6e08321. Having a 'bus-range' property for PCI bridges should not be required, so remove the warning when missing. There was some confusion with the Linux kernel printing a message that no property is present and the OS assigned the bus number. This message was intended to be informational rather than a warning. When the firmware doesn't enumerate the PCI bus and leaves it up to the OS to do, then it is perfectly fine for the OS to assign bus numbers and bus-range is not necessary. There are a few cases where bus-range is needed or useful as Arnd Bergmann summarized: - Traditionally Linux avoided using multiple PCI domains, but instead configured separate PCI host bridges to have non-overlapping bus ranges so we can present them to user space as a single domain, and run the kernel without CONFIG_PCI_DOMAINS. Specifying the bus ranges this way would and give stable bus numbers across boots when the probe order is not fixed. - On certain ARM64 systems, we must only use the first 128 bus numbers based on the way the IOMMU identifies the device with truncated bus/dev/fn number. There are probably others like this, with various limitations. - To leave some room for hotplugged devices, each slot on a host bridge can in theory get a range of bus numbers that are available when assigning bus numbers at boot time Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-15Merge tag 'kbuild-v4.17-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - pass HOSTLDFLAGS when compiling single .c host programs - build genksyms lexer and parser files instead of using shipped versions - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency - let the top .gitignore globally ignore artifacts generated by flex, bison, and asn1_compiler - let the top Makefile globally clean artifacts generated by flex, bison, and asn1_compiler - use safer .SECONDARY marker instead of .PRECIOUS to prevent intermediate files from being removed - support -fmacro-prefix-map option to make __FILE__ a relative path - fix # escaping to prepare for the future GNU Make release - clean up deb-pkg by using debian tools instead of handrolled source/changes generation - improve rpm-pkg portability by supporting kernel-install as a fallback of new-kernel-pkg - extend Kconfig listnewconfig target to provide more information * tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: extend output of 'listnewconfig' kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg Kbuild: fix # escaping in .cmd files for future Make kbuild: deb-pkg: split generating packaging and build kbuild: use -fmacro-prefix-map to make __FILE__ a relative path kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers kbuild: rename *-asn1.[ch] to *.asn1.[ch] kbuild: clean up *-asn1.[ch] patterns from top-level Makefile .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore kbuild: add %.dtb.S and %.dtb to 'targets' automatically kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically genksyms: generate lexer and parser during build instead of shipping kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore kbuild: use HOSTLDFLAGS for single .c executables
2018-04-12Merge tag 'asm-generic' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "I have one regression fix for a minor build problem after the architecture removal series, plus a rework of the barriers in the readl/writel functions, thanks to work by Sinan Kaya: This started from a discussion on the linuxpcc and rdma mailing lists[1]. To summarize, we decided that architectures are responsible to serialize readl() and writel() accesses on a device MMIO space relative to DMA performed by that device. This series provides a pessimistic implementation of that behavior for asm-generic/io.h, which is in turn used by a number of architectures (h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and xtensa). Some of those presumably need no extra barriers, or something weaker than rmb()/wmb(), and they are advised to override the new default for better performance. For inb()/outb(), the same barriers are used, but architectures might want to add another barrier to outb() here if that can guarantee non-posted behavior (some architectures can, others cannot do that). The readl_relaxed()/writel_relaxed() family of functions retains the existing behavior with no extra barriers" [1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html * tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: io: change writeX_relaxed() to remove barriers io: change readX_relaxed() to remove barriers dts: remove cris & metag dts hard link file io: change inX() to have their own IO barrier overrides io: change outX() to have their own IO barrier overrides io: define stronger ordering for the default writeX() implementation io: define stronger ordering for the default readX() implementation io: define several IO & PIO barrier types for the asm-generic version