Age | Commit message (Collapse) | Author |
|
[ Upstream commit 9d5171eab462a63e2fbebfccf6026e92be018f20 ]
The original patch 8c657a0590de ("KEYS: trusted: Reserve TPM for seal
and unseal operations") was correct on the mailing list:
https://lore.kernel.org/linux-integrity/20210128235621.127925-4-jarkko@kernel.org/
But somehow got rebased so that the tpm_try_get_ops() in
tpm2_seal_trusted() got lost. This causes an imbalanced put of the
TPM ops and causes oopses on TIS based hardware.
This fix puts back the lost tpm_try_get_ops()
Fixes: 8c657a0590de ("KEYS: trusted: Reserve TPM for seal and unseal operations")
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 02c587733c8161355a43e6e110c2e29bd0acff72 ]
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1].
When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.
This patch fixes the following compilation warning:
include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]
[akpm@linux-foundation.org: fix merge snafu]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c885a8 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9ad6e9cb39c66366bf7b9aece114aca277981a1f upstream.
Since commit 1b8b31a2e612 ("selinux: convert policy read-write lock to
RCU"), there is a small window during policy load where the new policy
pointer has already been installed, but some threads may still be
holding the old policy pointer in their read-side RCU critical sections.
This means that there may be conflicting attempts to add a new SID entry
to both tables via sidtab_context_to_sid().
See also (and the rest of the thread):
https://lore.kernel.org/selinux/CAFqZXNvfux46_f8gnvVvRYMKoes24nwm2n3sPbMjrB8vKTW00g@mail.gmail.com/
Fix this by installing the new policy pointer under the old sidtab's
spinlock along with marking the old sidtab as "frozen". Then, if an
attempt to add new entry to a "frozen" sidtab is detected, make
sidtab_context_to_sid() return -ESTALE to indicate that a new policy
has been installed and that the caller will have to abort the policy
transaction and try again after re-taking the policy pointer (which is
guaranteed to be a newer policy). This requires adding a retry-on-ESTALE
logic to all callers of sidtab_context_to_sid(), but fortunately these
are easy to determine and aren't that many.
This seems to be the simplest solution for this problem, even if it
looks somewhat ugly. Note that other places in the kernel (e.g.
do_mknodat() in fs/namei.c) use similar stale-retry patterns, so I think
it's reasonable.
Cc: stable@vger.kernel.org
Fixes: 1b8b31a2e612 ("selinux: convert policy read-write lock to RCU")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d8f5f0ea5b86300390b026b6c6e7836b7150814a upstream.
Currently, duplicate_policydb_cond_list() first copies the whole
conditional avtab and then tries to link to the correct entries in
cond_dup_av_list() using avtab_search(). However, since the conditional
avtab may contain multiple entries with the same key, this approach
often fails to find the right entry, potentially leading to wrong rules
being activated/deactivated when booleans are changed.
To fix this, instead start with an empty conditional avtab and add the
individual entries one-by-one while building the new av_lists. This
approach leads to the correct result, since each entry is present in the
av_lists exactly once.
The issue can be reproduced with Fedora policy as follows:
# sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True
# setsebool ftpd_anon_write=off ftpd_connect_all_unreserved=off ftpd_connect_db=off ftpd_full_access=off
On fixed kernels, the sesearch output is the same after the setsebool
command:
# sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True
While on the broken kernels, it will be different:
# sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
While there, also simplify the computation of nslots. This changes the
nslots values for nrules 2 or 3 to just two slots instead of 4, which
makes the sequence more consistent.
Cc: stable@vger.kernel.org
Fixes: c7c556f1e81b ("selinux: refactor changing booleans")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 442dc00f82a9727dc0c48c44f792c168f593c6df upstream.
1. Make sure all fileds are initialized in avtab_init().
2. Slightly refactor avtab_alloc() to use the above fact.
3. Use h->nslot == 0 as a sentinel in the access functions to prevent
dereferencing h->htable when it's not allocated.
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 92063f3ca73aab794bd5408d3361fd5b5ea33079 upstream.
The kernel may be built with multiple LSMs, but only a subset may be
enabled on the boot command line by specifying "lsm=". Not including
"integrity" on the ordered LSM list may result in a NULL deref.
As reported by Dmitry Vyukov:
in qemu:
qemu-system-x86_64 -enable-kvm -machine q35,nvdimm -cpu
max,migratable=off -smp 4 -m 4G,slots=4,maxmem=16G -hda
wheezy.img -kernel arch/x86/boot/bzImage -nographic -vga std
-soundhw all -usb -usbdevice tablet -bt hci -bt device:keyboard
-net user,host=10.0.2.10,hostfwd=tcp::10022-:22 -net
nic,model=virtio-net-pci -object
memory-backend-file,id=pmem1,share=off,mem-path=/dev/zero,size=64M
-device nvdimm,id=nvdimm1,memdev=pmem1 -append "console=ttyS0
root=/dev/sda earlyprintk=serial rodata=n oops=panic panic_on_warn=1
panic=86400 lsm=smack numa=fake=2 nopcid dummy_hcd.num=8" -pidfile
vm_pid -m 2G -cpu host
But it crashes on NULL deref in integrity_inode_get during boot:
Run /sbin/init as init process
BUG: kernel NULL pointer dereference, address: 000000000000001c
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc2+ #97
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-44-g88ab0c15525c-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmem_cache_alloc+0x2b/0x370 mm/slub.c:2920
Code: 57 41 56 41 55 41 54 41 89 f4 55 48 89 fd 53 48 83 ec 10 44 8b
3d d9 1f 90 0b 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 <8b> 5f
1c 4cf
RSP: 0000:ffffc9000032f9d8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888017fc4f00 RCX: 0000000000000000
RDX: ffff888040220000 RSI: 0000000000000c40 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff888019263627
R10: ffffffff83937cd1 R11: 0000000000000000 R12: 0000000000000c40
R13: ffff888019263538 R14: 0000000000000000 R15: 0000000000ffffff
FS: 0000000000000000(0000) GS:ffff88802d180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000001c CR3: 000000000b48e000 CR4: 0000000000750ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
integrity_inode_get+0x47/0x260 security/integrity/iint.c:105
process_measurement+0x33d/0x17e0 security/integrity/ima/ima_main.c:237
ima_bprm_check+0xde/0x210 security/integrity/ima/ima_main.c:474
security_bprm_check+0x7d/0xa0 security/security.c:845
search_binary_handler fs/exec.c:1708 [inline]
exec_binprm fs/exec.c:1761 [inline]
bprm_execve fs/exec.c:1830 [inline]
bprm_execve+0x764/0x19a0 fs/exec.c:1792
kernel_execve+0x370/0x460 fs/exec.c:1973
try_to_run_init_process+0x14/0x4e init/main.c:1366
kernel_init+0x11d/0x1b8 init/main.c:1477
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Modules linked in:
CR2: 000000000000001c
---[ end trace 22d601a500de7d79 ]---
Since LSMs and IMA may be configured at build time, but not enabled at
run time, panic the system if "integrity" was not initialized before use.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 79f7865d844c ("LSM: Introduce "lsm=" for boottime LSM selection")
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6406887a12ee5dcdaffff1a8508d91113d545559 upstream.
Commit 02a52c5c8c3b ("selinux: move policy commit after updating
selinuxfs") moved the selinux_policy_commit() call out of
security_load_policy() into sel_write_load(), which caused a subtle yet
rather serious bug.
The problem is that security_load_policy() passes a reference to the
convert_params local variable to sidtab_convert(), which stores it in
the sidtab, where it may be accessed until the policy is swapped over
and RCU synchronized. Before 02a52c5c8c3b, selinux_policy_commit() was
called directly from security_load_policy(), so the convert_params
pointer remained valid all the way until the old sidtab was destroyed,
but now that's no longer the case and calls to sidtab_context_to_sid()
on the old sidtab after security_load_policy() returns may cause invalid
memory accesses.
This can be easily triggered using the stress test from commit
ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve
performance"):
```
function rand_cat() {
echo $(( $RANDOM % 1024 ))
}
function do_work() {
while true; do
echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \
>/sys/fs/selinux/context 2>/dev/null || true
done
}
do_work >/dev/null &
do_work >/dev/null &
do_work >/dev/null &
while load_policy; do echo -n .; sleep 0.1; done
kill %1
kill %2
kill %3
```
Fix this by allocating the temporary sidtab convert structures
dynamically and passing them among the
selinux_policy_{load,cancel,commit} functions.
Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs")
Cc: stable@vger.kernel.org
Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: merge fuzz in security.h and services.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 519dad3bcd809dc1523bf80ab0310ddb3bf00ade upstream.
If sel_make_policy_nodes() fails, we should jump to 'out', not 'out1',
as the latter would incorrectly log an MAC_POLICY_LOAD audit record,
even though the policy hasn't actually been reloaded. The 'out1' jump
label now becomes unused and can be removed.
Fixes: 02a52c5c8c3b ("selinux: move policy commit after updating selinuxfs")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
capabilities")
commit 3b0c2d3eaa83da259d7726192cf55a137769012f upstream.
It turns out that there are in fact userspace implementations that
care and this recent change caused a regression.
https://github.com/containers/buildah/issues/3071
As the motivation for the original change was future development,
and the impact is existing real world code just revert this change
and allow the ambiguity in v3 file caps.
Cc: stable@vger.kernel.org
Fixes: 95ebabde382c ("capabilities: Don't allow writing ambiguous v3 file capabilities")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c83465f3245c2faa82ffeb7016f40f02bfaa0ad upstream.
Commit db68ce10c4f0a27c ("new helper: uaccess_kernel()") replaced
segment_eq(get_fs(), KERNEL_DS) with uaccess_kernel(). But the correct
method for tomoyo to check whether current is a kernel thread in order
to assume that kernel threads are privileged for socket operations was
(current->flags & PF_KTHREAD). Now that uaccess_kernel() became 0 on x86,
tomoyo has to fix this problem. Do like commit 942cb357ae7d9249 ("Smack:
Handle io_uring kernel thread privileges") does.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5797e861e402fff2bedce4ec8b7c89f4248b6073 upstream.
syzbot is reporting that tomoyo's quota check is racy [1]. But this check
is tolerant of some degree of inaccuracy. Thus, teach KCSAN to ignore
this data race.
[1] https://syzkaller.appspot.com/bug?id=999533deec7ba6337f8aa25d8bd1a4d5f7e50476
Reported-by: syzbot <syzbot+0789a72b46fd91431bd8@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ef4c19d245f3dc233fd4be5acea436edd1d83d8 upstream.
syzbot found WARNINGs in several smackfs write operations where
bytes count is passed to memdup_user_nul which exceeds
GFP MAX_ORDER. Check count size if bigger than PAGE_SIZE.
Per smackfs doc, smk_write_net4addr accepts any label or -CIPSO,
smk_write_net6addr accepts any label or -DELETE. I couldn't find
any general rule for other label lengths except SMK_LABELLEN,
SMK_LONGLABEL, SMK_CIPSOMAX which are documented.
Let's constrain, in general, smackfs label lengths for PAGE_SIZE.
Although fuzzer crashes write to smackfs/netlabel on 0x400000 length.
Here is a quick way to reproduce the WARNING:
python -c "print('A' * 0x400000)" > /sys/fs/smackfs/netlabel
Reported-by: syzbot+a71a442385a0b2815497@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c657a0590de585b1115847c17b34a58025f2f4b upstream.
When TPM 2.0 trusted keys code was moved to the trusted keys subsystem,
the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(),
which are used to take temporarily the ownership of the TPM chip. The
ownership is only taken inside tpm_send(), but this is not sufficient,
as in the key load TPM2_CC_LOAD, TPM2_CC_UNSEAL and TPM2_FLUSH_CONTEXT
need to be done as a one single atom.
Take the TPM chip ownership before sending anything with
tpm_try_get_ops() and tpm_put_ops(), and use tpm_transmit_cmd() to send
TPM commands instead of tpm_send(), reverting back to the old behaviour.
Fixes: 2e19e10131a0 ("KEYS: trusted: Move TPM2 trusted keys code")
Reported-by: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Acked-by Sumit Garg <sumit.garg@linaro.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8da7520c80468c48f981f0b81fc1be6599e3b0ad upstream.
Consider the following transcript:
$ keyctl add trusted kmk "new 32 blobauth=helloworld keyhandle=80000000 migratable=1" @u
add_key: Invalid argument
The documentation has the following description:
migratable= 0|1 indicating permission to reseal to new PCR values,
default 1 (resealing allowed)
The consequence is that "migratable=1" should succeed. Fix this by
allowing this condition to pass instead of return -EINVAL.
[*] Documentation/security/keys/trusted-encrypted.rst
Cc: stable@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Fixes: d00a1c72f7f4 ("keys: add new trusted key-type")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5df16caada3fba3b21cb09b85cdedf99507f4ec1 upstream.
When tpm_get_random() was introduced, it defined the following API for the
return value:
1. A positive value tells how many bytes of random data was generated.
2. A negative value on error.
However, in the call sites the API was used incorrectly, i.e. as it would
only return negative values and otherwise zero. Returning he positive read
counts to the user space does not make any possible sense.
Fix this by returning -EIO when tpm_get_random() returns a positive value.
Fixes: 41ab999c80f1 ("tpm: Move tpm_get_random api into the TPM device driver")
Cc: stable@vger.kernel.org
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9ffe682c58aaff643764547f5420e978b6e0830 upstream.
When inode has no listxattr op of its own (e.g. squashfs) vfs_listxattr
calls the LSM inode_listsecurity hooks to list the xattrs that LSMs will
intercept in inode_getxattr hooks.
When selinux LSM is installed but not initialized, it will list the
security.selinux xattr in inode_listsecurity, but will not intercept it
in inode_getxattr. This results in -ENODATA for a getxattr call for an
xattr returned by listxattr.
This situation was manifested as overlayfs failure to copy up lower
files from squashfs when selinux is built-in but not initialized,
because ovl_copy_xattr() iterates the lower inode xattrs by
vfs_listxattr() and vfs_getxattr().
Match the logic of inode_listsecurity to that of inode_getxattr and
do not list the security.selinux xattr if selinux is not initialized.
Reported-by: Michael Labriola <michael.d.labriola@gmail.com>
Tested-by: Michael Labriola <michael.d.labriola@gmail.com>
Link: https://lore.kernel.org/linux-unionfs/2nv9d47zt7.fsf@aldarion.sourceruckus.org/
Fixes: c8e222616c7e ("selinux: allow reading labels before policy is loaded")
Cc: stable@vger.kernel.org#v5.9+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4993e1f9479a4161fd7d93e2b8b30b438f00cb0f ]
KEY_FLAG_KEEP is not meant to be passed to keyring_alloc() or key_alloc(),
as these only take KEY_ALLOC_* flags. KEY_FLAG_KEEP has the same value as
KEY_ALLOC_BYPASS_RESTRICTION, but fortunately only key_create_or_update()
uses it. LSMs using the key_alloc hook don't check that flag.
KEY_FLAG_KEEP is then ignored but fortunately (again) the root user cannot
write to the blacklist keyring, so it is not possible to remove a key/hash
from it.
Fix this by adding a KEY_ALLOC_SET_KEEP flag that tells key_alloc() to set
KEY_FLAG_KEEP on the new key. blacklist_init() can then, correctly, pass
this to keyring_alloc().
We can also use this in ima_mok_init() rather than setting the flag
manually.
Note that this doesn't fix an observable bug with the current
implementation but it is required to allow addition of new hashes to the
blacklist in the future without making it possible for them to be removed.
Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring")
Reported-by: Mickaël Salaün <mic@linux.microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mickaël Salaün <mic@linux.microsoft.com>
cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8fe62e0c0e2efa5437f3ee81b65d69e70a45ecd2 ]
The merged API doesn't use a watch_queue device, but instead relies on
pipes, so let the documentation reflect that.
Fixes: f7e47677e39a ("watch_queue: Add a key/keyring notification facility")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95ebabde382c371572297915b104e55403674e73 ]
The v3 file capabilities have a uid field that records the filesystem
uid of the root user of the user namespace the file capabilities are
valid in.
When someone is silly enough to have the same underlying uid as the
root uid of multiple nested containers a v3 filesystem capability can
be ambiguous.
In the spirit of don't do that then, forbid writing a v3 filesystem
capability if it is ambiguous.
Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Reviewed-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f31e3386a4e92ba6eda7328cb508462956c94c64 ]
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. This buffer is not freed before
completing the kexec system call resulting in memory leak.
Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6d14c6517885fa68524238787420511b87d671df ]
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. In error code paths this memory
is not freed resulting in memory leak.
Free the memory allocated for the IMA measurement list in
the error code paths in ima_add_kexec_buffer() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ccf11dbaa07b328fa469415c362d33459c140a37 ]
tmp_tfm is allocated, but not freed on subsequent kmalloc failure, which
leads to a memory leak. Free tmp_tfm.
Fixes: d46eb3699502b ("evm: crypto hash replaced by shash")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
[zohar@linux.ibm.com: formatted/reworded patch description]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
If a capability is stored on disk in v2 format cap_inode_getsecurity() will
currently return in v2 format unconditionally.
This is wrong: v2 cap should be equivalent to a v3 cap with zero rootid,
and so the same conversions performed on it.
If the rootid cannot be mapped, v3 is returned unconverted. Fix this so
that both v2 and v3 return -EOVERFLOW if the rootid (or the owner of the fs
user namespace in case of v2) cannot be mapped into the current user
namespace.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
We are not guaranteed the locking environment that would prevent
dentry getting renamed right under us. And it's possible for
old long name to be freed after rename, leading to UAF here.
Cc: stable@kernel.org # v2.6.2+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://github.com/cschaufler/smack-next
Pull smack fix from Casey Schaufler:
"Provide a fix for the incorrect handling of privilege in the face of
io_uring's use of kernel threads. That invalidated an long standing
assumption regarding the privilege of kernel threads.
The fix is simple and safe. It was provided by Jens Axboe and has been
tested"
* tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next:
Smack: Handle io_uring kernel thread privileges
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
|
|
Smack assumes that kernel threads are privileged for smackfs
operations. This was necessary because the credential of the
kernel thread was not related to a user operation. With io_uring
the credential does reflect a user's rights and can be used.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
- Allow unprivileged mounting in a user namespace.
For quite some time the security model of overlayfs has been that
operations on underlying layers shall be performed with the
privileges of the mounting task.
This way an unprvileged user cannot gain privileges by the act of
mounting an overlayfs instance. A full audit of all function calls
made by the overlayfs code has been performed to see whether they
conform to this model, and this branch contains some fixes in this
regard.
- Support running on copied filesystem images by optionally disabling
UUID verification.
- Bug fixes as well as documentation updates.
* tag 'ovl-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: unprivieged mounts
ovl: do not get metacopy for userxattr
ovl: do not fail because of O_NOATIME
ovl: do not fail when setting origin xattr
ovl: user xattr
ovl: simplify file splice
ovl: make ioctl() safe
ovl: check privs before decoding file handle
vfs: verify source area in vfs_dedupe_file_range_one()
vfs: move cap_convert_nscap() call into vfs_setxattr()
ovl: fix incorrect extent info in metacopy case
ovl: expand warning in ovl_d_real()
ovl: document lower modification caveats
ovl: warn about orphan metacopy
ovl: doc clarification
ovl: introduce new "uuid=off" option for inodes index feature
ovl: propagate ovl_fs to ovl_decode_real_fh and ovl_encode_real_fh
|
|
Pull smack updates from Casey Schaufler:
"There are no functional changes. Just one minor code clean-up and a
set of corrections in function header comments"
* tag 'Smack-for-5.11' of git://github.com/cschaufler/smack-next:
security/smack: remove unused varible 'rc'
Smack: fix kernel-doc interface on functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"Just three patches here. Other integrity changes are being upstreamed
via EFI (defines a common EFI secure and trusted boot IMA policy) and
BPF LSM (exporting the IMA file cache hash info based on inode).
The three patches included here:
- bug fix: fail calculating the file hash, when a file not opened for
read and the attempt to re-open it for read fails.
- defer processing the "ima_appraise" boot command line option to
avoid enabling different modes (e.g. fix, log) to when the secure
boot flag is available on arm.
- defines "ima-buf" as the default IMA buffer measurement template in
preparation for the builtin integrity "critical data" policy"
* tag 'integrity-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Don't modify file descriptor mode on the fly
ima: select ima-buf template for buffer measurement
ima: defer arch_ima_get_secureboot() call to IMA init time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"While we have a small number of SELinux patches for v5.11, there are a
few changes worth highlighting:
- Change the LSM network hooks to pass flowi_common structs instead
of the parent flowi struct as the LSMs do not currently need the
full flowi struct and they do not have enough information to use it
safely (missing information on the address family).
This patch was discussed both with Herbert Xu (representing team
netdev) and James Morris (representing team
LSMs-other-than-SELinux).
- Fix how we handle errors in inode_doinit_with_dentry() so that we
attempt to properly label the inode on following lookups instead of
continuing to treat it as unlabeled.
- Tweak the kernel logic around allowx, auditallowx, and dontauditx
SELinux policy statements such that the auditx/dontauditx are
effective even without the allowx statement.
Everything passes our test suite"
* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
selinux: Fix fall-through warnings for Clang
selinux: drop super_block backpointer from superblock_security_struct
selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
selinux: allow dontauditx and auditallowx rules to take effect without allowx
selinux: fix error initialization in inode_doinit_with_dentry()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"A small set of audit patches for v5.11 with four patches in total and
only one of any real significance.
Richard's patch to trigger accompanying records causes the kernel to
emit additional related records when an audit event occurs; helping
provide some much needed context to events in the audit log. It is
also worth mentioning that this is a revised patch based on an earlier
attempt that had to be reverted in the v5.8 time frame.
Everything passes our test suite, and with no problems reported please
merge this for v5.11"
* tag 'audit-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: replace atomic_add_return()
audit: fix macros warnings
audit: trigger accompanying records when no rules present
audit: fix a kernel-doc markup
|
|
Strangely I hadn't had noticed the existence of the list_entry_is_head()
in apparmor code when added the same one in the list.h. Luckily it's
fully identical and didn't break builds. In any case we don't need a
duplicate anymore, thus remove it from apparmor code.
Link: https://lkml.kernel.org/r/20201208100639.88182-1-andriy.shevchenko@linux.intel.com
Fixes: e130816164e244 ("include/linux/list.h: add a macro to test if entry is pointing to the head")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E . Hallyn " <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
|
|
Pull tomoyo updates from Tetsuo Handa:
"Limit recursion depth, fix clang warning, fix comment typo, and
silence memory allocation failure warning"
* tag 'tomoyo-pr-20201214' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
tomoyo: Fix typo in comments.
tomoyo: Fix null pointer check
tomoyo: Limit wildcard recursion depth.
tomoyo: fix clang pointer arithmetic warning
tomoyo: Loosen pathname/domainname validation.
|
|
cap_convert_nscap() does permission checking as well as conversion of the
xattr value conditionally based on fs's user-ns.
This is needed by overlayfs and probably other layered fs (ecryptfs) and is
what vfs_foo() is supposed to do anyway.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-12-12
Just one patch this time:
1) Redact the SA keys with kernel lockdown confidentiality.
If enabled, no secret keys are sent to uuserspace.
From Antony Antony.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: redact SA secret with lockdown confidentiality
====================
Link: https://lore.kernel.org/r/20201212085737.2101294-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Spotted by developers and codespell program.
Co-developed-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Co-developed-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A followup change to tcp_request_sock_op would have to drop the 'const'
qualifier from the 'route_req' function as the
'security_inet_conn_request' call is moved there - and that function
expects a 'struct sock *'.
However, it turns out its also possible to add a const qualifier to
security_inet_conn_request instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit a408e4a86b36b ("ima: open a new file instance if no read
permissions") already introduced a second open to measure a file when the
original file descriptor does not allow it. However, it didn't remove the
existing method of changing the mode of the original file descriptor, which
is still necessary if the current process does not have enough privileges
to open a new one.
Changing the mode isn't really an option, as the filesystem might need to
do preliminary steps to make the read possible. Thus, this patch removes
the code and keeps the second open as the only option to measure a file
when it is unreadable with the original file descriptor.
Cc: <stable@vger.kernel.org> # 4.20.x: 0014cc04e8ec0 ima: Set file->f_mode
Fixes: 2fe5d6def1672 ("ima: integrity appraisal extension")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Since tomoyo_memory_ok() will check for null pointer returned by
kzalloc() in tomoyo_assign_profile(), tomoyo_assign_namespace(),
tomoyo_get_name() and tomoyo_commit_ok(), then emit OOM warnings
if needed. And this is the expected behavior as informed by
Tetsuo Handa.
Let's add __GFP_NOWARN to kzalloc() in those related functions.
Besides, to achieve this goal, remove the null check for entry
right after kzalloc() in tomoyo_assign_namespace().
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
redact XFRM SA secret in the netlink response to xfrm_get_sa()
or dumpall sa.
Enable lockdown, confidentiality mode, at boot or at run time.
e.g. when enabled:
cat /sys/kernel/security/lockdown
none integrity [confidentiality]
ip xfrm state
src 172.16.1.200 dst 172.16.1.100
proto esp spi 0x00000002 reqid 2 mode tunnel
replay-window 0
aead rfc4106(gcm(aes)) 0x0000000000000000000000000000000000000000 96
note: the aead secret is redacted.
Redacting secret is also a FIPS 140-2 requirement.
v1->v2
- add size checks before memset calls
v2->v3
- replace spaces with tabs for consistency
v3->v4
- use kernel lockdown instead of a /proc setting
v4->v5
- remove kconfig option
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This is in preparation to add a helper for BPF LSM programs to use
IMA hashes when attached to LSM hooks. There are LSM hooks like
inode_unlink which do not have a struct file * argument and cannot
use the existing ima_file_hash API.
An inode based API is, therefore, useful in LSM based detections like an
executable trying to delete itself which rely on the inode_unlink LSM
hook.
Moreover, the ima_file_hash function does nothing with the struct file
pointer apart from calling file_inode on it and converting it to an
inode.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-2-kpsingh@chromium.org
|
|
As pointed out by Herbert in a recent related patch, the LSM hooks do
not have the necessary address family information to use the flowi
struct safely. As none of the LSMs currently use any of the protocol
specific flowi information, replace the flowi pointers with pointers
to the address family independent flowi_common struct.
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Provide the proposed description (add key) or the original description
(update/instantiate key) when preparsing a key so that the key type can
validate it against the data.
This is important for rxrpc server keys as we need to check that they have
the right amount of key material present - and it's better to do that when
the key is loaded rather than deep in trying to process a response packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
cc: keyrings@vger.kernel.org
|
|
The default IMA template used for all policy rules is the value set
for CONFIG_IMA_DEFAULT_TEMPLATE if the policy rule does not specify
a template. The default IMA template for buffer measurements should be
'ima-buf' - so that the measured buffer is correctly included in the IMA
measurement log entry.
With the default template format, buffer measurements are added to
the measurement list, but do not include the buffer data, making it
difficult, if not impossible, to validate. Including 'ima-buf'
template records in the measurement list by default, should not impact
existing attestation servers without 'ima-buf' template support.
Initialize a global 'ima-buf' template and select that template,
by default, for buffer measurements.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|