summaryrefslogtreecommitdiff
path: root/sound/soc/intel/atom/sst-atom-controls.c
AgeCommit message (Collapse)Author
2019-01-03ASoC: Intel: Atom: simplify boolean testsPierre-Louis Bossart
Detected with Coccinelle Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: intel: atom: replace platform to componentKuninori Morimoto
Now platform can be replaced to component, let's do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: "Kp, Jeeja" <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31Merge branch 'fix/intel' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2017-01-31ASoC: Intel: atom: fix frame polarityPierre-Louis Bossart
The current frame sync polarity definitions are inconsistent in the Atom/DPCM driver, fix to align with regular ASoC definitions and update code in platform and machine drivers for RT5640 and RT5651. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-31ASoC: Intel: Atom: Configure media_loop1 and sprot_loop in stereoSebastien Guiriec
Most of the devices are using stereo speakers so media_loop1 and sprot_loop default mode should be stereo. As per default all the routing UCM configuration doesn't enable Post processing loops it is not impacting curent configurations. Signed-off-by: Sebastien Guiriec <sebastien.guiriec@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-29ASoC: Intel: atom: Make some messages to debug levelTakashi Iwai
Intel sst driver spews lots of kernel messages in INFO level; typically, it gives a kernel message at each time it allocates or frees a stream, or at each time when a stream is started or stopped. This will piles up quickly, and it's almost useless for normal users, so let's hide them to KERN_DEBUG level. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: atom: enable configuration of SSP0Pierre-Louis Bossart
Existing code used SSP2, make selection of SSP id dependent on port name. This is required when the machine driver uses non-default settings Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-15ASoC: Intel: Atom: add definitions for modem/SSP0 interfacePierre-Louis Bossart
The Atom DPCM driver only allowed for the SSP2 interface, add definitions for modem/SSP0. These definitions might be used to route audio to a codec connected to SSP0 (instead of a modem in traditional usages), but there is a restriction to 2ch I2S. SSP2 is capable of handling up to 4 slot TDM. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-22ASoC: Intel: Atom: fix boot warningVinod Koul
Users have reported seeing this false warning on atom driver [ 5.647469] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!! [ 5.661612] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!! [ 5.661646] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!! [ 5.661681] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!! [ 5.661708] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!! [ 5.661738] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!! [ 5.661771] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!! [ 5.661807] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!! This is caused when check for control is not being associated with a dapm widget, but the check is wrong as the else case maybe triggered when widget is not powered up, so we should check if widget is associated before printing this message. Tested-by: Sandeep Tayal <sandeepx.tayal@intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoC: Intel: Atom: flip logic for gain SwitchPierre-Louis Bossart
The upstreamed code modified the control names from Mute to Switch without changing the logic. To get audio working the Switch needs to be off which isn't aligned with normal ALSA conventions. Inverting the logic now so that Switch Off means mute and Switch On means active audio using the specific volume setting. Signed-off-by: Sebastien Guiriec <sebastien.guiriec@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-19ASoc: Intel: Atom: add deep buffer definitions for atom platformsPierre-Louis Bossart
Add definitions for MERR_DPCM_DEEP_BUFFER AND PIPE_MEDIA3_IN Add relevant cpu-dai and dai link names Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-30Merge remote-tracking branches 'asoc/topic/intel', 'asoc/topic/kirkwood', ↵Mark Brown
'asoc/topic/lm49453', 'asoc/topic/max9768' and 'asoc/topic/max98088' into asoc-next
2015-07-29ASoC: dapm: Add widget path iteratorsLars-Peter Clausen
Add helper iterator macros for iterating over the source and sink paths of widget. This will make it easier to change the implementation later on. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-08ASoC: intel - atom: statify sst_slot_enum_infoVinod Koul
Sparse complains that sst_slot_enum_info should be static, so make it static sound/soc/intel/atom/sst-atom-controls.c:135:5: warning: symbol 'sst_slot_enum_info' was not declared. Should it be static? Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: Intel: mrfld: simplify sst_fill_widget_module_infoRasmus Villemoes
Some tiny improvements, cutting 180 bytes off the generated code. - use strchr() for single-character needle - compute index using pointer subtraction instead of two strlen() calls - factor out the common check for whether the initial part of kctl->id.name (before the space) is identical to w->name. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06ASoC: Intel: add support for configuring TDM slots for SSPVinod Koul
With this machines can now configure TDM settings for SSP port using set_tdm_slot API Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06ASoC: intel: add support for specifying PCM formatVinod Koul
With this machines can configure the PCM format applied on SSP port using the set_fmt API Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06ASoC: Intel: use local values for ssp configurationVinod Koul
So right now SSP configuration is statically coded in the driver. While we would like to keep this configuration intact for the users who are using these defaults, we need to provide a way for users to program it. So create a local value in driver structure which is populate with default value for now Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06ASoC: Intel: add frame and data polarity to ssp configVinod Koul
The current ssp configuration was not configuring the frame sync polarity and data polarity. Some codecs do need these different so add them in ssp configuration now Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-06ASoC: Intel: create atom folder and move atom platform files inJie Yang
Restructure the sound/soc/intel/ directory: create atom folder, and move sst atom platform files here. Signed-off-by: Jie Yang <yang.jie@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-02 16:20:38 +0000