summaryrefslogtreecommitdiff
path: root/sound/soc/sh
AgeCommit message (Collapse)Author
2010-07-29ASoC: fsi: Add new funtion for SPDIFKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-29ASoC: fsi: remove device id checkKuninori Morimoto
Current FSI driver id is not only 0 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-29ASoC: fsi: remove unnecessary clock processingKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-17ASoC: fsi: Add specified ID for soc-audioKuninori Morimoto
Specified ID is necessary, when some codecs are used with FSI. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: Fixup for master modeKuninori Morimoto
This patch add hw_params to snd_soc_dai_ops, because board specific set_rate is needed when FSI was used as master mode. This patch remove fsi_clk_ctrl from fsi_dai_startup, because clock should be disabled before set_rate. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: Add pr_err for noticing unsupported accessKuninori Morimoto
This patch didn't use dev_err, because it is difficult to get struct device here. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: Change struct fsi_regs to fsi_coreKuninori Morimoto
Many registers which were grouped by category were added in FSI2. To make easy to switch FSI/FSI2, fsi_core was added instead of fsi_regs. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: remove noisy CR_FMT macroKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: remove un-used variable on fsi_dai_startupKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13Merge branch 'for-2.6.35' into for-2.6.36Mark Brown
2010-07-13ASoC: fsi: fixup wrong value setting order of TDMKuninori Morimoto
channel size should be set before setting register value Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-07-13ASoC: fsi: fixup clock inversion operationKuninori Morimoto
Clock inversion should be specified by each flags bit. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-06-16ASoC: Fix I2C dependency for SND_FSI_AK4642 and SND_FSI_DA7210Peter Huewe
The config option SND_FSI_AK4642 selects SND_SOC_AK4642 which in turn enables the compilation of ak4642.c - however this codec uses I2C to communicate with the HW. Same applies to DA7210. Consequently when I2C is not set, the compilation fails [1] This patch fixes this issues, by adding a depencdency on the related HW- controller. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-06-15ASoC: header cleanup for FSI-DA7210Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-06-15ASoC: header cleanup for FSI-AK4642Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-06-15ASoC: header cleanup for FSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits) ALSA: snd-usb-caiaq: Bump version number to 1.3.21 ALSA: Revert "ALSA: snd-usb-caiaq: Set default input mode of A4DJ" ALSA: snd-usb-caiaq: Simplify single case to an 'if' ALSA: snd-usb-caiaq: Restore 'Control vinyl' input mode on A4DJ ALSA: hda: Use LPIB for a Shuttle device ALSA: hda: Add support for another Lenovo ThinkPad Edge in conexant codec ALSA: hda: Use LPIB for Sony VPCS11V9E ALSA: usb-audio: fix feature unit parser for UAC2 ALSA: asihpi - Minor code cleanup ALSA: asihpi - Add support for new ASI8800 family ALSA: asihpi - Fix bug preventing outstream_write preload from happening ALSA: asihpi - Fix imbalanced lock path in hw_message ALSA: asihpi - Remove support for old ASI8800 family ALSA: asihpi - Add hd radio blend functions ALSA: asihpi - Remove unused io map functions ALSA: usb-audio: add support for UAC2 pitch control ALSA: usb-audio: parse UAC2 endpoint descriptors correctly ALSA: usb-audio: fix return values ALSA: usb-audio: parse more format descriptors with structs sound: Add missing spin_unlock ...
2010-05-27Merge branch 'for-2.6.35' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2010-05-26ASoC: fix uninitialised variable in siu_dai.cGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-22sh: define DMA slaves per CPU type, remove now redundant headerGuennadi Liakhovetski
Now that DMA slave IDs are only used used in platform specific code and have become opaque cookies for the rest of the code, we can make the, CPU specific too. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-20Merge branch 'topic/asoc' into for-linusTakashi Iwai
Conflicts: sound/soc/codecs/ad1938.c
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-26ASoC: fsi: Add FSI2 device supportKuninori Morimoto
ARM-SHMOBILE series have FIFO-buffered serial interface 2 (FSI2) device which is advanced version of FSI. This patch add simple support for it. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-26ASoC: fsi: Add FIFO size calculateKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-24ASoC: fsi: IRQ related process had be unitedKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-24ASoC: fsi: ensures process inside master lockKuninori Morimoto
Bit operation for fsi_master should be done inside master lock. But soft-reset/interrupt operation were outside of it. This patch modify this problem. It still allow to INT_ST outside-operation on fsi_interrupt, but it is not problem. Because this register doesn't need the bit operation. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-23ASoC: ak4642: Add set_fmt function for snd_soc_dai_opsKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-23ASoC: ak4642: Add pll select supportKuninori Morimoto
Current ak4642 was not able to select pll. This patch add support it. It still expect PLL base input pin is MCKI. see Table 5 "setting of PLL Mode" of datasheet Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18ASoC: SIU driver shall select FW_LOADERGuennadi Liakhovetski
The SIU ASoC driver must load firmware to program the DSP, therefore it has to select FW_LOADER in its Kconfig entry. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-02dmaengine: shdma: separate DMA headers.Guennadi Liakhovetski
Separate SH DMA headers into ones, commonly used by both drivers, and ones, specific to each of them. This will make the future development of the dmaengine driver easier. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-23ASoC: fsi: Modify over/under run error settlementKuninori Morimoto
In current FSI driver, playback function cares only overrun, and capture function cares only underrun. But playback function should had cared about underrun, and capture function should had cared about overrun too. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-12ASoC: fix compile breakage if CONFIG_SH_DMA_API=y && CONFIG_SND_SIU_MIGOR!=nGuennadi Liakhovetski
Audio on Migo-R cannot work if CONFIG_SH_DMA_API=y, but compilation should not break anyway. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-03ASoC: fix compilation breakage in sound/soc/sh/fsi.cGuennadi Liakhovetski
ctrl_outl() has become void at some point, which breaks compilation of fsi.c. Make writing functions void, as their output is anyway not evaluated, and use __raw_writel and __raw_readl instead of deprecated ctrl_outl and ctrl_inl respectively. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-29ASoC: clean up wm8974 and wm8978 clock divider handlingGuennadi Liakhovetski
wm8974 and wm8978 codec drivers control DAC and ADC oversampling rates in their .set_clkdiv() methods, which is wrong, because these are simple boolean switches and not clock dividers. Move these bits to sound controls. Also remove manual configuration of the MCLK divider in wm8978, since it is configured automatically. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-29ASoC: add support for the sh7722 Migo-R boardGuennadi Liakhovetski
Add support for audio on sh7722-based Migo-R boards, using SIU and wm8978 codec, recording via external microphone and playback via headphones are implemented. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-28ASoC: fsi: Add spin lock operation for accessing shared areaKuninori Morimoto
fsi_master_xxx function should be protected by spin lock, because it are used from both FSI-A and FSI-B. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-25ASoC: add DAI and platform / DMA drivers for SH SIUGuennadi Liakhovetski
Several SuperH platforms, including sh7722, sh7343, sh7354, sh7367 include a Sound Interface Unit (SIU). This patch adds DAI and platform / DMA drivers for this interface. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-12Merge branch 'for-2.6.33' into for-2.6.34Mark Brown
2009-12-30ASoC: fsi: Add over/under run error settlementKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-30ASoC: fsi: Add fsi_get_dai to get snd_soc_daiKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-30ASoC: fsi: Add over_period flag to prevent the misunderstandingKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-24ASoC: fsi-ak4642: Remove ak4642_add_i2c_deviceKuninori Morimoto
I2C devices should be registered when platform board setting in latest ASoC. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-22ASoC: sh: FSI:: don't check platform_get_irq's return value against zeroUwe Kleine-König
platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-16ASoC: Add FSI-DA7210 sound support for SuperHKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-03ASoC: sh_fsi: avoid using global variableKuninori Morimoto
Current FSI driver use global variable to access device data. But this style will be broken if SuperH come with multiple FSI blocks in future. To solve this problem, this patch use cpu_dai->private_data. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-30ASoC: sh: fsi: Add runtime PM supportKuninori Morimoto
This patch add support runtime PM. Driver callbacks for Runtime PM are empty because the device registers are always re-initialized after pm_runtime_get_sync(). The Runtime PM functions replaces the clock framework module stop bit handling in this driver. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-30ASoC: sh: FSI: Add capture supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-30ASoC: sh: FSI: Remove DMA supportKuninori Morimoto
SuperH FSI device have the hardware limitation to use DMA. If DMA is used, LCD output will be broken. Maybe there are some solution. But I don't know how to do it now. This patch remove DMA support and use soft transfer. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add FSI-AK4642 sound support for SuperHKuninori Morimoto
This patch is tested by ms7724se Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: Add SuperH FSI driver support for ALSAKuninori Morimoto
This driver is very simple. It support playback only now. This patch is tested by ms7724se board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 15:40:58 +0000