summaryrefslogtreecommitdiff
path: root/sound/usb/quirks.c
AgeCommit message (Collapse)Author
2020-09-21ALSA: usb-audio: Add delay quirk for H570e USB headsetsJoakim Tjernlund
Needs the same delay as H650e Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200910085328.19188-1-joakim.tjernlund@infinera.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-26ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2František Kučera
This patch extends support for DJM-250MK2 and allows recording. However, DVS is not possible yet (see the comment in code). Signed-off-by: František Kučera <franta-linux@frantovo.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200825153113.6352-1-konference@frantovo.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-23ALSA: usb-audio: Disable autosuspend for Lenovo ThinkStation P620Kai-Heng Feng
If USB autosuspend is enabled, both front and rear panel can no longer detect jack insertion. Enable USB remote wakeup, i.e. needs_remote_wakeup = 1, doesn't help either. So disable USB autosuspend to prevent missing jack detection event. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200823105854.26950-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-10ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109Hector Martin
Further investigation of the L-R swap problem on the MS2109 reveals that the problem isn't that the channels are swapped, but rather that they are swapped and also out of phase by one sample. In other words, the issue is actually that the very first frame that comes from the hardware is a half-frame containing only the right channel, and after that everything becomes offset. So introduce a new quirk field to drop the very first 2 bytes that come in after the format is configured and a capture stream starts. This puts the channels in phase and in the correct order. Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200810082400.225858-1-marcan@marcan.st Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-03Merge branch 'for-next' into for-linusTakashi Iwai
2020-06-30ALSA: usb-audio: Fix some typosAlexander Tsoy
Fix the following typos in comments and in the code: - KHz -> kHz - procssed -> processed Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20200629032607.255419-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-06-23ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG)Macpaul Lin
We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051) need a tiny delay after each class compliant request. Otherwise the device might not be able to be recognized each times. Signed-off-by: Chihhao Chen <chihhao.chen@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-06-23ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight SChristoffer Nielsen
Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud Alpha S (0951:0x16ea) uses two interfaces, but only the second interface contains the capture stream. This patch delays the registration until the second interface appears. Signed-off-by: Christoffer Nielsen <cn@obviux.dk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAOtG2YHOM3zy+ed9KS-J4HkZo_QGzcUG9MigSp4e4_-13r6B=Q@mail.gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-06-15ALSA: usb-audio: add quirk for Denon DCD-1500REYick W. Tse
fix error "clock source 41 is not valid, cannot use" [] New USB device found, idVendor=154e, idProduct=1002, bcdDevice= 1.00 [] New USB device strings: Mfr=1, Product=2, SerialNumber=0 [] Product: DCD-1500RE [] Manufacturer: D & M Holdings Inc. [] [] clock source 41 is not valid, cannot use [] usbcore: registered new interface driver snd-usb-audio Signed-off-by: Yick W. Tse <y_w_tse@yahoo.com.hk> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1373857985.210365.1592048406997@mail.yahoo.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-06-01ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 supportDmitry Panchenko
Pioneer DJ DJM-900NXS2 is a widely used DJ mixer with 2 audio USB interfaces. Both have a MIDI controller, 10 playback and 12 capture channels. Audio endpoints are vendor-specific and 3 files need to be patched. All playback and capture channels work fine with all supported sample rates (44.1k, 48k, 96k). Patches are attached. Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee> Link: https://lore.kernel.org/r/48ab19ff-3303-9bf8-ed0e-bcb31d8537eb@d-systems.ee Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-05-28Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge 5.7-devel branch for further development. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-05-01ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headsetJesus Ramos
Kingston HyperX headset with 0951:16ad also needs the same quirk for delaying the frequency controls. Signed-off-by: Jesus Ramos <jesus-ramos@live.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/BY5PR19MB3634BA68C7CCA23D8DF428E796AF0@BY5PR19MB3634.namprd19.prod.outlook.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-30ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB IDTakashi Iwai
The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0. Fixes: f656891c6619 ("ALSA: usb-audio: add more quirks for DSD interfaces") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200430124755.15940-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-24ALSA: usb-audio: Remove async workaround for Scarlett 2nd genAlexander Tsoy
Frame size computation has been fixed and the workaround is no longer needed. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20200424022449.14972-2-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-21ALSA: usb-audio: Apply async workaround for Scarlett 2i4 2nd genAlexander Tsoy
Due to rounding error driver sometimes incorrectly calculate next packet size, which results in audible clicks on devices with synchronous playback endpoints. For example on a high speed bus and a sample rate 44.1 kHz it loses one sample every ~40.9 seconds. Fortunately playback interface on Scarlett 2i4 2nd gen has a working explicit feedback endpoint, so we can switch playback data endpoint to asynchronous mode as a workaround. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20200421190908.462860-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-21ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2Gregor Pintar
Force it to use asynchronous playback. Same quirk has already been added for Focusrite Scarlett Solo (2nd gen) with a commit 46f5710f0b88 ("ALSA: usb-audio: Add quirk for Focusrite Scarlett Solo"). This also seems to prevent regular clicks when playing at 44100Hz on Scarlett 2i2 (2nd gen). I did not notice any side effects. Moved both quirks to snd_usb_audioformat_attributes_quirk() as suggested. Signed-off-by: Gregor Pintar <grpintar@gmail.com> Reviewed-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20200420214030.2361-1-grpintar@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-04ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha SEmmanuel Pescosta
Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud Alpha S (0951:16d8) uses two interfaces, but only the second interface contains the capture stream. This patch delays the registration until the second interface appears. Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com> Link: https://lore.kernel.org/r/20200404153843.9288-1-emmanuelpescosta099@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-26ALSA: usb-audio: Rewrite registration quirk handlingTakashi Iwai
A slight refactoring of the registration quirk code. Now it uses the table lookup for easy additions in future. Also the return type was changed to bool, and got a few more comments. Link: https://lore.kernel.org/r/20200325103322.2508-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-14ALSA: usb-audio: Create a registration quirk for Kingston HyperX Amp (0951:16d8)Chris Wulff
Create a quirk that allows special processing and/or skipping the call to snd_card_register. For HyperX AMP, which uses two interfaces, but only has a capture stream in the second, this allows the capture stream to merge with the first PCM. Signed-off-by: Chris Wulff <crwulff@gmail.com> Link: https://lore.kernel.org/r/20200314165449.4086-3-crwulff@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-06ALSA: usb-audio: Add support for MOTU MicroBook IIcAlexander Tsoy
MicroBook IIc operates in UAC2 mode by default. This patch addresses several issues with it: - MicroBook II and IIc shares the same USB ID. We can distinguish them by interface class. - MaxPacketsOnly attribute is erroneously set in endpoint descriptors. As a result this card produces noise with all sample rates other than 96 KHz. This also causes issues like IOMMU page faults and other problems with host controller. - Sample rate changes takes more than 2 seconds for this device. Clock validity request returns false during that period, so the clock validity quirk is required. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20200229151815.14199-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-02-17Merge branch 'topic/usb-uac2-effect-unit' into for-nextTakashi Iwai
Merging the UAC2 effect unit parser improvement. As it's based on the previous usb-audio driver fix, it was deviated from for-next branch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-02-15ALSA: usb-audio: Add support for Presonus Studio 1810cNick Kossifidis
This patch adds support for Presonus Studio 1810c, a usb interface that's UAC2 compliant with a few quirks and a few extra hw-specific controls. I've tested all 3 altsettings and the added switch controls and they work as expected. More infos on the card: https://www.presonus.com/products/Studio-1810c Note that this work is based on packet inspection with usbmon. I just wanted to get this card to work for using it on our open-source radio station: https://github.com/UoC-Radio v2 address issues reported by Takashi: * Properly get/set enum type controls * Prevent race condition on switch_get/set * Various control naming changes * Various coding style fixes v3 improve readability of sample rate filtering and some other minor changes. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Link: https://lore.kernel.org/r/5e47481a.1c69fb81.befb3.8dac@mx.google.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-02-11ALSA: usb-audio: Apply sample rate quirk for Audioengine D1Arvind Sankar
The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate, but it returns the rate in byte-reversed order. When setting sampling rate, the driver produces these warning messages: [168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100 [168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000 [168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000 As can be seen from the hexadecimal conversion, the current rate read back is byte-reversed from the rate that was set. 44100 == 0x00ac44, 4500480 == 0x44ac00 48000 == 0x00bb80, 8436480 == 0x80bb00 96000 == 0x017700, 30465 == 0x007701 Rather than implementing a new quirk to reverse the order, just skip checking the rate to avoid spamming the log. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.edu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-13ALSA: usb-audio: Add boot quirk for MOTU M SeriesAlexander Tsoy
Add delay to make sure that audio urbs are not sent too early. Otherwise the device hangs. Windows driver makes ~2s delay, so use about the same time delay value. snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which is an overkill. Thus a quirk that is called only once is implemented. Also send two vendor-specific control messages before and after the delay. This behaviour is blindly copied from the Windows driver. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20200112102358.18085-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-05ALSA: usb-audio: Use lower hex numbers for IDsTakashi Iwai
For consistency reason, make all hex numbers with lower alphabets for USB ID entries. It improves grep-ability and reduces careless mistakes. Link: https://lore.kernel.org/r/20200105081900.21870-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-04ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5Takashi Iwai
Bose Companion 5 (with USB ID 05a7:1020) doesn't seem supporting reading back the sample rate, so the existing quirk is needed. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206063 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200104110936.14288-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-12-18ALSA: usb-audio: set the interface format after resume on Dell WD19Hui Wang
Recently we found the headset-mic on the Dell Dock WD19 doesn't work anymore after s3 (s2i or deep), this problem could be workarounded by closing (pcm_close) the app and then reopening (pcm_open) the app, so this bug is not easy to be detected by users. When problem happens, retire_capture_urb() could still be called periodically, but the size of captured data is always 0, it could be a firmware bug on the dock. Anyway I found after resuming, the snd_usb_pcm_prepare() will be called, and if we forcibly run set_format() to set the interface and its endpoint, the capture size will be normal again. This problem and workaound also apply to playback. To fix it in the kernel, add a quirk to let set_format() run forcibly once after resume. Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191218132650.6303-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-14ALSA: usb-audio: Fix incorrect NULL check in create_yamaha_midi_quirk()Takashi Iwai
The commit 60849562a5db ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") added NULL checks in create_yamaha_midi_quirk(), but there was an overlook. The code allows one of either injd or outjd is NULL, but the second if check made returning -ENODEV if any of them is NULL. Fix it in a proper form. Fixes: 60849562a5db ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") Reported-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-24ALSA: usb-audio: Add DSD support for Gustard U16/X26 USB InterfaceJustin Song
This patch adds native DSD support for Gustard U16/X26 USB Interface. Tested using VID and fp->dsd_raw method. Signed-off-by: Justin Song <flyingecar@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CA+9XP1ipsFn+r3bCBKRinQv-JrJ+EHOGBdZWZoMwxFv0R8Y1MQ@mail.gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-09-24ALSA: usb-audio: Add DSD support for EVGA NU AudioJussi Laako
EVGA NU Audio is actually a USB audio device on a PCIexpress card, with it's own USB controller. It supports both PCM and DSD. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190924071143.30911-1-jussi@sonarnerd.net Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-09-17ALSA: usb-audio: Add Hiby device family to quirks for native DSD supportIlya Pshonkin
This patch adds quirk VID ID for Hiby portable players family with native DSD playback support. Signed-off-by: Ilya Pshonkin <sudokamikaze@protonmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190917074937.157802-1-ilya.pshonkin@netforce.ua Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-28ALSA: usb-audio: Update DSD support quirks for Oppo and RotelJussi Laako
Oppo has issued firmware updates that change alt setting used for DSD support. However, these devices seem to support auto-detection, so support is moved from explicit whitelisting to auto-detection. Also Rotel devices have USB interfaces that support DSD with auto-detection. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-28ALSA: usb-audio: DSD auto-detection for Playback DesignsJussi Laako
Add DSD support auto-detection for newer Playback Designs devices. Older device generations have a different USB interface implementation. Keep the auto-detection VID whitelist sorted. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-26ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()Takashi Iwai
The previous addition of descriptor validation may lead to a NULL dereference at create_yamaha_midi_quirk() when either injd or outjd is NULL. Add proper non-NULL checks. Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-22ALSA: usb-audio: More validations of descriptor unitsTakashi Iwai
Introduce a new helper to validate each audio descriptor unit before and check the unit before actually accessing it. This should harden against the OOB access cases with malformed descriptors that have been recently frequently reported by fuzzers. The existing descriptor checks are still kept although they become superfluous after this patch. They'll be cleaned up eventually later. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-08Merge tag 'asoc-v5.3' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.3 This is a very big update, mainly thanks to Morimoto-san's refactoring work and some fairly large new drivers. - Lots more work on moving towards a component based framework from Morimoto-san. - Support for force disconnecting muxes from Jerome Brunet. - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-24ALSA: usb-audio: Sanity checks for each pipe and EP typesTakashi Iwai
The recent USB core code performs sanity checks for the given pipe and EP types, and it can be hit by manipulated USB descriptors by syzbot. For making syzbot happier, this patch introduces a local helper for a sanity check in the driver side and calls it at each place before the message handling, so that we can avoid the WARNING splats. Reported-by: syzbot+d952e5e28f5fb7718d23@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28ALSA: usb-audio: Add quirk for MOTU MicroBook IIManuel Reinhardt
Add an entry to the quirks-table to for usb-audio to recognize the Microbook II (although it only exposes vendor interfaces). A simple boot quirk is also implemented to set up the sample rate and make sure that no audio urbs are sent before the device is ready. This patch only provides audio playback and capture at 96kHz sample rate. Notice the following shortcomings: - The sample rate is currently hardcoded to 96k although the device also supports 48k and 44.1k. - The various mixer controls of the MicroBook are not made available. - The keep-iface control should be on by default because the device shuts down whenever the altsetting is reset which is usually unwanted. (I don't know the best way to do this) - The communication format used by the MicroBook for sample rate setting and also other setup has been reverse engineered by looking at the usbmon output while running the windows driver through virtualbox. In this patch the first byte of every message is set to \0 while in the observed communications the first byte acts as a "message-counter" increasing its value with every message sent. Leaving it at \0 does not seem to affect the device. Signed-off-by: Manuel Reinhardt <manuel.rhdt@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-08Merge branch 'for-linus' into for-nextTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-05ALSA: usb-audio: Add support for new T+A USB DACUdo Eberhardt
This patch adds the T+A VID to the generic check in order to enable native DSD support for T+A devices. This works with the new T+A USB DAC model SD3100HV and will also work with future devices which support the XMOS/Thesycon style DSD format. Signed-off-by: Udo Eberhardt <udo.eberhardt@thesycon.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-29ALSA: usb-audio: Cleanup DSD whitelistJussi Laako
XMOS/Thesycon family of USB Audio Class firmware flags DSD altsetting separate from the PCM ones. Thus the DSD altsetting can be auto-detected based on the flag and doesn't need maintaining specific altsetting whitelist. In addition, static VID:PID-to-altsetting whitelisting causes problems when firmware update changes the altsetting, or same VID:PID is reused for another device that has different kind of firmware. This patch removes existing explicit whitelist mappings for XMOS VID (0x20b1) and Thesycon VID (0x152a). Also corrects placement of Hegel HD12 and NuPrime DAC-10 to keep list sorted based on VID. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-25ALSA: usb-audio: Add Opus #3 to quirks for native DSD supportOlek Poplavsky
This patch adds quirk VID/PID IDs for the Opus #3 DAP (made by 'The Bit') in order to enable Native DSD support. [ NOTE: this could be handled in the generic way with fp->dvd_raw if we add 0x10cb to the vendor whitelist, but since 0x10cb shows a different vendor name (Erantech), put to the individual entry at this time -- tiwai ] Signed-off-by: Olek Poplavsky <woodenbits@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-08ALSA: usb-audio: fix CM6206 register definitionsAmadeusz Sławiński
fix typo after a recent commit causing headphones to have no sound Fixes: ad43d528a7ac (ALSA: usb-audio: Define registers for CM6206) Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-07Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge for applying the more HD-audio quirks on top of the latest code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-29ALSA: usb-audio: Add SMSL D1 to quirks for native DSD supportTony Das
This patch adds quirk VID/PID IDs for the SMSL D1 in order to enable Native DSD support. [ Moved the added entry in numerical order -- tiwai ] Signed-off-by: Tony Das <tdas444@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-06ALSA: usb-audio: Define registers for CM6206Linus Walleij
The register map for CM6206 is known and we can define what the values written to the different registers actually mean. I tested to print the hex values before/after this change, there is no functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: usb-audio: quirks: Replace mdelay() with msleep() and usleep_range()Jia-Ju Bai
snd_usb_select_mode_quirk(), snd_usb_set_interface_quirk() and snd_usb_ctl_msg_quirk() are never called in atomic context. They call mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep() and usleep_range(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-26ALSA: usb-audio: Add support for Encore mDSD USB DACJeff Crukley
This patch adds native DSD playback support for the Encore mDSD USB DAC by specifying the vendor and product ID's Signed-off-by: Jeff Crukley <jcrukley@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-23ALSA: usb-audio: Generic DSD detection for Thesycon-based implementationsYue Wang
Thesycon provides solutions to XMOS chips, and has its own device vendor id. In this patch, we use generic method to detect DSD capability of Thesycon-based UAC2 implementations in order to support a wide range of current and future devices. The patch will enable the SNDRV_PCM_FMTBIT_DSD_U32_BE bit for the DAC hence enable native DSD playback up to DSD512 format. Signed-off-by: Yue Wang <yuleopen@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-10 04:37:06 +0000