summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2010-08-04Merge remote branch 'devicetree/next-devicetree'Stephen Rothwell
Conflicts: arch/microblaze/kernel/Makefile
2010-08-04Merge remote branch 'suspend/linux-next'Stephen Rothwell
Conflicts: drivers/net/e1000e/netdev.c drivers/net/wireless/ipw2x00/ipw2100.c
2010-08-04Merge remote branch 'trivial/for-next'Stephen Rothwell
2010-08-04Merge remote branch 'pcmcia/master'Stephen Rothwell
2010-08-03Merge branch 'topic/hda' into for-nextTakashi Iwai
2010-08-03ALSA: hda - Add PC-beep whitelist for an Intel boardTakashi Iwai
An Intel board needs a white-list entry to enable PC-beep. Otherwise the driver misdetects (due to bogus BIOS info) and ignores the PC-beep on 2.6.35. Reported-and-tested-by: Leandro Lucarella <luca@llucax.com.ar> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - More relax for pending period handlingTakashi Iwai
Since the pending periods are often bogus and take long time until actually processed, it often results in a high CPU usage of the hd-audio workq. Overall it's better to have low CPU consumption by avoiding a too tight loop rather than the wake-up timing accuracy. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03Merge branch 'topic/hda' into for-nextTakashi Iwai
2010-08-03ALSA: hda - Define AC_FMT_* constantsTakashi Iwai
Define constants for the HD-audio stream format bits, and replace the magic numbers in codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03Merge branch 'topic/hda' into for-nextTakashi Iwai
2010-08-03ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecsDaniel J Blueman
Fix HDA beep frequency on IDT 92HD73xx and 92HD71Bxx codecs. These codecs use the standard beep frequency calculation although the datasheet says it's linear frequency. Other IDT/STAC codecs might have the same problem. They should be fixed individually later. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - Add support for HDMI HBR passthroughAnssi Hannula
Passing IEC 61937 encapsulated compressed audio at bitrates over 6.144 Mbps (i.e. more than a single 2-channel 16-bit 192kHz IEC 60958 link) over HDMI requires the use of HBR Audio Stream Packets instead of Audio Sample Packets. Enable HBR mode when the stream has 8 channels and the Non-PCM bit is set. If the audio converter is not connected to any HBR-capable pins, return -EINVAL in prepare(). Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - Set Stream Type in Stream Format according to AES0Anssi Hannula
Set bit 15 (Stream Type) of HDA Stream Format to 1 (Non-PCM) when IEC958 channel status bit 1 (AES0 & 0x02) is set to 1 (non-audio). This is a prequisite for HDMI HBR passthrough. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03Merge branch 'topic/asoc' into for-nextTakashi Iwai
2010-08-03Merge branch 'topic/hda' into for-nextTakashi Iwai
2010-08-03pcmcia: do not use io_req_t when calling pcmcia_request_io()Dominik Brodowski
Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: do not use io_req_t after call to pcmcia_request_io()Dominik Brodowski
After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposedJerone Young
Just as with the X301. The X300 does not have a way to do SPDIF either. It does not have a dock connector, nor does it have the SPDIF through the headphone jack. This patch fixes it so X300 does not show SPDIF, since it cannot do it. To add all Lenovo Thinkpads had different codec subsytem IDs: X300: http://launchpadlibrarian.net/34862838/Card0.Codecs.codec.0.txt Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have ↵Jerone Young
the ability to use SPDIF The Lenovo X301 does not have the ability to connect to a docking station to use the SPDIF port. It also does not have the ability to do SPDIF though the headphone jack or Display Port jacks. This patch fixes it so this is not exposed for the X301 and users do think it has the ability to do SPDIF. I tested both headphone & display port jacks and it is not there. I have tested this patch and it works great. Also to add the other Thinkpads have different subsystem codec IDs. Here are examples: X301: http://launchpadlibrarian.net/31561902/Card0.Codecs.codec.0.txt X200: http://launchpadlibrarian.net/49055036/Card0.Codecs.codec.0.txt W500: http://launchpadlibrarian.net/36276057/Card0.Codecs.codec.0.txt Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-03ASoC: wm9081: fix resource reclaim in wm9081_register error pathAxel Lin
This patch fixes the error path in wm9081_register to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8978: fix a memory leak if a wm8978_register failAxel Lin
There is a memory leak found if wm8978_register() fail. This patch moves the buffer allocate and release at the same level to prevent the memory leak. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8974: fix a memory leak if another WM8974 is registeredAxel Lin
wm8974 is allocated in wm8974_i2c_probe() but is not freed if wm8974_register() return -EINVAL (if another WM8974 is registered). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8961: fix resource reclaim in wm8961_register error pathAxel Lin
This patch fixes the error path in wm8961_register to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8955: fix resource reclaim in wm8955_register error pathAxel Lin
This patch fixes the error path in wm8955_register to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8940: fix a memory leak if wm8940_register return errorAxel Lin
This patch adds checking for wm8940_register return value, and does kfree(wm8940) if wm8940_register() fail. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8904: fix resource reclaim in wm8904_register error pathAxel Lin
This patch includes below fixes: 1. wm8904 need to be kfreed in wm8904_register() error path before return. 2. fix the error path for snd_soc_register_codec() fail and snd_soc_register_dai() fail to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8711: fix a memory leak if another WM8711 is registeredAxel Lin
wm8711 is allocated in either wm8711_spi_probe() or wm8711_i2c_probe() but is not freed if wm8711_register() return -EINVAL(if another ad1836 is registered). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8523: fix resource reclaim in wm8523_register error pathAxel Lin
This patch includes below fixes: 1. If another WM8523 is registered, need to kfree wm8523 before return -EINVAL. 2. If snd_soc_register_codec failed, goto error path to properly free resources. 3. Instead of using mixed in-line and goto style cleanup, use goto style error handling if snd_soc_register_dai failed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: da7210: fix a memory leak if failed to initialise da7210 audio codecAxel Lin
da7210 should be kfreed if da7210_init() return error. This patch also fixes the error handing in the case of snd_soc_register_dai() fail by adding snd_soc_unregister_codec() in error path. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: ak4642: fix a memory leak if failed to initialise AK4642Axel Lin
ak4642 should be kfreed if ak4642_init() return error. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: ad1836: fix a memory leak if another ad1836 is registeredAxel Lin
ad1836 is allocated in ad1836_spi_probe() but is not freed if ad1836_register() return -EINVAL (if another ad1836 is registered). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: Initial WM8741 CODEC driverIan Lartey
The WM8741 is a very high performance stereo DAC designed for audio applications such as professional recording systems, A/V receivers and high specification CD, DVD and home theatre systems. The device supports PCM data input word lengths from 16 to 32-bits and sampling rates up to 192kHz. The WM8741 also supports DSD bit-stream data format, in both direct DSD and PCM-converted DSD modes. TODO: Expand wm8741_set_dai_sysclk and rate_constraint members to allow for all supported sample rate / Master Clock frequency combinations. Fully enable control of supplies. Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-02Merge branch 'topic/hda' into for-nextTakashi Iwai
2010-08-02ALSA: hda - Do not try to create speaker NIDs for ALC268 if there aren't anyDavid Henningsson
Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-02Merge branch 'topic/asoc' into for-nextTakashi Iwai
2010-08-02Merge branch 'for-2.6.36' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2010-08-02ASoC: omap-mcbsp: Remove period size constraint in THRESHOLD modePeter Ujfalusi
The use of sDMA packet mode in THRESHOLD mode removes the restriction on the period size. With the extended THRESHOLD mode user space can ask for any period size it wishes, and the driver will configure the sDMA and McBSP FIFO accordingly. Replace the hw_rule for the period size with static constraint, which will make sure that the period size will be always even (to avoid prime period size, which could be possible in mono stream) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Support for sDMA packet modePeter Ujfalusi
Utilize the sDMA controller's packet syncronization mode, when the McBSP FIFO is in use (by extending the THRESHOLD mode). When the sDMA is configured for packet mode, the sDMA frame size does not need to match with the McBSP threshold configuration. Uppon DMA request the sDMA will transfer packet size number of words, and still trigger interrupt on frame boundary. The patch extends the original THRESHOLD mode by doing the following: if (period_words <= max_threshold) Current THRESHOLD mode configuration Otherwise (period_words > max_threshold) McBSP threshold = sDMA packet size sDMA frame size = period size With the extended THRESHOLD mode we can remove the constraint for the maximum period size, since if the period size is bigger than the maximum allowed threshold, than the driver will switch to packet mode, and picks the best (biggest) threshold value, which can divide evenly the period size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Code cleanup in omap_mcbsp_dai_hw_paramsPeter Ujfalusi
To make the code a bit more readable, change the indexed references to the omap_mcbsp_dai_dma_params elements with pointer. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02ASoC: omap-mcbsp: Restructure the code within omap_mcbsp_dai_hw_paramsPeter Ujfalusi
In preparation for the extended threshold mode (sDMA packet mode support), the code need to be restructured. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-02Merge branch 'topic/misc' into for-nextTakashi Iwai
2010-08-02ALSA: usb - Correct audio problem for Hauppage HVR-850 and others rel. to ↵John S Gruber
urb data align Match usb ids in usb/quirks-table.h for some Hauppage HVR-950Q models and for the HVR850 model to those ids at the end of au0828-cards.c Thanks to nhJm449 for pointing out the problem. Signed-off-by: John S Gruber <JohnSGruber@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30pcmcia: remove cs_types.hDominik Brodowski
Remove cs_types.h which is no longer needed: Most definitions aren't used at all, a few can be made away with, and two remaining definitions (typedefs, unfortunatley) may be moved to more specific places. CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30Merge branch 'topic/hda' into for-nextTakashi Iwai
2010-07-30ALSA: hda - Add a warning for ignored pins with ALC259/268/269Takashi Iwai
The current ALC259/268/269 parser ignores some pins as unhandled, but user won't notice what goes wrong. So, added a warning message for the ignored pins as a hint. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30ALSA: hda - Handle pin NID 0x1a on ALC259/269Takashi Iwai
The pin NID 0x1a should be handled as well as NID 0x1b. Also added comments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30Merge branch 'topic/hda' into for-nextTakashi Iwai
2010-07-30ALSA: hda - Shut up pins at power-saving mode with Conexnat codecsTakashi Iwai
Call snd_hda_shutup_pins() for power-saving and reboot-notifier in patch_conexant.c as well as other codecs. This will reduce the pop noise in power-save mode. Reference: bnc#624896 https://bugzilla.novell.com/show_bug.cgi?id=624896 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-30Merge branch 'topic/hda' into for-nextTakashi Iwai
2010-07-30ALSA: hda - Prefer VREF50 if BIOS sets for Realtek codecsTakashi Iwai
If BIOS sets up the input pin as VREF 50, use the value as is instead of overriding forcibly to VREF 80. This fixes the quality of inputs on some devices like Packard-Bell M5210. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-04 02:09:34 +0000