| Age | Commit message (Collapse) | Author |
|---|
|
Drop the @vcpuids parameter from VM creators now that there are no users.
Allowing tests to specify IDs was a gigantic mistake as it resulted in
tests with arbitrary and ultimately meaningless IDs that differed only
because the author used test X intead of test Y as the source for
copy+paste (the de facto standard way to create a KVM selftest).
Except for literally two tests, x86's set_boot_cpu_id and s390's resets,
tests do not and should not care about the vCPU ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop all vm_create_default*() helpers, the "default" naming turned out to
terrible as wasn't extensible (hard to have multiple defaults), was a lie
(half the settings were default, half weren't), and failed to capture
relationships between helpers, e.g. compared with the kernel's standard
underscores pattern.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a VM creator that "returns" the created vCPUs by filling the provided
array. This will allow converting multi-vCPU tests away from hardcoded
vCPU IDs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename vm_vcpu_add() to __vm_vcpu_add(), and vm_vcpu_add_default() to
vm_vcpu_add() to show the relationship between the newly minted
vm_vcpu_add() and __vm_vcpu_add().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
An "unrestricted guest" is an VMX-only concept, move the relevant helper
to x86-64 code. Assume most readers can correctly convert underscores to
spaces and oppurtunistically trim the function comment.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Return the created vCPU from vm_vcpu_add() so that callers don't need to
manually retrieve the vCPU that was just added. Opportunistically drop
the "heavy" function comment, it adds a lot of lines of "code" but not
much value, e.g. it's pretty obvious that @vm is a virtual machine...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename 'struct vcpu' to 'struct kvm_vcpu' to align with 'struct kvm_vm'
in the selftest, and to give readers a hint that the struct is specific
to KVM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename the "state" field of 'struct vcpu' to "run". KVM calls it "run",
the struct name is "kvm_run", etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add ____vm_create() to be the innermost helper, and turn vm_create() into
a wrapper the specifies VM_MODE_DEFAULT. Most of the vm_create() callers
just want the default mode, or more accurately, don't care about the mode.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename vm_create_without_vcpus() to vm_create() so that it's not
misconstrued as helper that creates a VM that can never have vCPUs, as
opposed to a helper that "just" creates a VM without vCPUs added at time
zero.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename vm_create() to vm_create_barebones() and drop the @phys_pages
param. Pass '0' for the number of pages even though some callers pass
'DEFAULT_GUEST_PHY_PAGES', as the intent behind creating truly barebones
VMs is purely to create a VM, i.e. there aren't vCPUs, there's no guest
code loaded, etc..., and so there is nothing that will ever need or
consume guest memory.
Freeing up the name vm_create() will allow using the name for an inner
helper to the other VM creators, which need a "full" VM.
Opportunisticaly rewrite the function comment for addr_gpa2alias() to
focus on what the _function_ does, not what its _sole caller_ does.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the call to vm_adjust_num_guest_pages() from vm_create_with_vcpus()
down into vm_create_without_vcpus(). This will allow a future patch to
make the "w/o vCPUs" variant the common inner helper, e.g. so that the
"with_vcpus" helper calls the "without_vcpus" helper, instead of having
them be separate paths.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add VM creation helpers to expose/return 'struct vcpu' so that tests
don't have to hardcode a VCPU_ID or make assumptions about what vCPU ID
is used by the framework just to retrieve a vCPU the test created.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rework the KVM_ENABLE_CAP helpers to take the cap and arg0; literally
every current user, and likely every future user, wants to set 0 or 1
arguments and nothing else.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a backpointer to 'struct vcpu' so that tests can get at the owning
VM when passing around a vCPU object. Long term, this will be little
more than a nice-to-have feature, but in the short term it is a critical
step toward purging the VM+vcpu_id ioctl mess without introducing even
more churn.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Split the get/set device_attr helpers instead of using a boolean param to
select between get and set. Duplicating upper level wrappers is a very,
very small price to pay for improved readability, and having constant (at
compile time) inputs will allow the selftests framework to sanity check
ioctl() invocations.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop 'int' returns from *_device_has_attr() helpers that assert the
return is '0', there's no point in returning '0' and "requiring" the
caller to perform a redundant assertion.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename kvm_device_check_attr() and its variants to kvm_has_device_attr()
to be consistent with the ioctl names and with other helpers in the KVM
selftests framework.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Multiplex the return value and fd (on success) in __kvm_create_device()
to mimic common library helpers that return file descriptors, e.g. open().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move KVM_CREATE_DEVICE_TEST to its own helper, identifying "real" versus
"test" device creation based on a hardcoded boolean buried in the middle
of a param list is painful for readers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the two calls that pass @test=true to kvm_create_device() and drop
the @test param entirely. The two removed calls don't check the return
value of kvm_create_device(), so other than verifying KVM doesn't explode,
which is extremely unlikely given that the non-test variant was _just_
called, they are pointless and provide no validation coverage.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fold kvm_util_internal.h into kvm_util_base.h, i.e. make all KVM utility
stuff "public". Hiding struct implementations from tests has been a
massive failure, as it has led to pointless and poorly named wrappers,
unnecessarily opaque code, etc...
Not to mention that the approach was a complete failure as evidenced by
the non-zero number of tests that were including kvm_util_internal.h.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use __KVM_SYSCALL_ERROR() to report and pretty print non-KVM syscall and
ioctl errors, e.g. for mmap(), munmap(), uffd ioctls, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the recently introduced KVM-specific ioctl() helpers instead of open
coding calls to ioctl() just to pretty print the ioctl name.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make kvm_ioctl() a macro wrapper and print the _name_ of the ioctl on
failure instead of the number.
Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence, again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the recently introduced VM-specific ioctl() helpers instead of open
coding calls to ioctl() just to pretty print the ioctl name. Keep a few
open coded assertions that provide additional info.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make vm_ioctl() a macro wrapper and print the _name_ of the ioctl on
failure instead of the number.
Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence. Again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add vcpu_get() to wrap vcpu_find() and deduplicate a pile of code that
asserts the requested vCPU exists.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop vcpu_get_fd(), it no longer has any users, and really should not
exist as the framework has failed if tests need to manually operate on
a vCPU fd.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add __vcpu_run() so that tests that want to avoid asserts on KVM_RUN
failures don't need to open code the ioctl() call.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the recently introduced vCPU-specific ioctl() helpers instead of
open coding calls to ioctl() just to pretty print the ioctl name.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Split vcpu_nested_state_set() into a wrapper that asserts, and an inner
helper that does not. Passing a bool is all kinds of awful as it's
unintuitive for readers and requires returning an 'int' from a function
that for most users can never return anything other than "success".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop @mode from vm_create() and have it use VM_MODE_DEFAULT. Add and use
an inner helper, __vm_create(), to service the handful of tests that want
something other than VM_MODE_DEFAULT.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make vcpu_ioctl() a macro wrapper and pretty the _name_ of the ioctl on
failure instead of the number. Add inner macros to allow handling cases
where the name of the ioctl needs to be resolved higher up the stack, and
to allow using the formatting for non-ioctl syscalls without being
technically wrong.
Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence, again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a second underscore to inner ioctl() helpers to better align with
commonly accepted kernel coding style, and to allow using a single
underscore variant in the future for macro shenanigans.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop the @perm param from vm_create() and always open VM file descriptors
with O_RDWR. There's no legitimate use case for other permissions, and
if a selftest wants to do oddball negative testing it can open code the
necessary bits instead of forcing a bunch of tests to provide useless
information.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Extract the code for allocating guest memory via memfd out of
vm_userspace_mem_region_add() and into a new helper, kvm_memfd_alloc().
A future selftest to populate a guest with the maximum amount of guest
memory will abuse KVM's memslots to alias guest memory regions to a
single memfd-backed host region, i.e. needs to back a guest with memfd
memory without a 1:1 association between a memslot and a memfd instance.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-27-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move set_memory_region_test's KVM_SET_USER_MEMORY_REGION helper to KVM's
utils so that it can be used by other tests. Provide a raw version as
well as an assert-success version to reduce the amount of boilerplate
code need for basic usage.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220226001546.360188-26-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Carve out portion of vm_create_default so that selftests can modify
a "default" VM prior to creating vcpus.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-3-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no need for tests other than amx_test to enable dynamic xsave
states. Remove the call to vm_xsave_req_perm from generic code,
and move it inside the test. While at it, allow customizing the bit
that is requested, so that future tests can use it differently.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some indentation with spaces crept in, likely due to terminal-based
cut and paste. Clean it up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vm_xsave_req_perm() is currently defined and used by x86_64 only.
Make it compiled into vm_create_with_vcpus() only when on x86_64
machines. Otherwise, it would cause linkage errors, e.g. on s390x.
Fixes: 415a3c33e8 ("kvm: selftests: Add support for KVM_CAP_XSAVE2")
Reported-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Tested-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220118014817.30910-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When KVM_CAP_XSAVE2 is supported, userspace is expected to allocate
buffer for KVM_GET_XSAVE2 and KVM_SET_XSAVE using the size returned
by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2).
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Guang Zeng <guang.zeng@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-20-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
|
|
* kvm-arm64/selftest/irq-injection:
: .
: New tests from Ricardo Koller:
: "This series adds a new test, aarch64/vgic-irq, that validates the injection of
: different types of IRQs from userspace using various methods and configurations"
: .
KVM: selftests: aarch64: Add test for restoring active IRQs
KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq
KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq
KVM: selftests: Add IRQ GSI routing library functions
KVM: selftests: aarch64: Add test_inject_fail to vgic_irq
KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq
KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq
KVM: selftests: aarch64: Add preemption tests in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq
KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test
KVM: selftests: aarch64: Abstract the injection functions in vgic_irq
KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection
KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ state
KVM: selftests: Add kvm_irq_line library function
KVM: selftests: aarch64: Add GICv3 register accessor library functions
KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist registers
KVM: selftests: aarch64: Move gic_v3.h to shared headers
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add an architecture independent wrapper function for creating and
writing IRQ GSI routing tables. Also add a function to add irqchip
entries.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-15-ricarkol@google.com
|
|
Add an architecture independent wrapper function for the KVM_IRQ_LINE
ioctl.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211109023906.1091208-5-ricarkol@google.com
|
|
The 16kB page size is not a popular choice, due to only a few CPUs
actually implementing support for it. However, it can lead to some
interesting performance improvements given the right uarch choices.
Add support for this page size for various PA/VA combinations.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211227124809.1335409-7-maz@kernel.org
|
|
Some of the arm64 systems out there have an IPA space that is
positively tiny. Nonetheless, they make great KVM hosts.
Add support for 36bit IPA support with 4kB pages, which makes
some of the fruity machines happy. Whilst we're at it, add support
for 64kB pages as well, though these boxes have no support for it.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211227124809.1335409-6-maz@kernel.org
|
|
Attempting to compile on a non-x86 architecture fails with
include/kvm_util.h: In function ‘vm_compute_max_gfn’:
include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’
return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1;
^~
This is because the declaration of struct kvm_vm is in
lib/kvm_util_internal.h as an effort to make it private to
the test lib code. We can still provide arch specific functions,
though, by making the generic function symbols weak. Do that to
fix the compile error.
Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211214151842.848314-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
