From 1e699e177e339e462cdc8571e3d0fcf29665608e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 4 Nov 2022 16:37:30 -0700 Subject: Revert "hwmon: (pmbus) Add regulator supply into macro" This reverts commit 54cc3dbfc10dc3db7cb1cf49aee4477a8398fbde. Zev Weiss reports that the reverted patch may cause a regulator undercount. Here is his report: ... having regulator-dummy set as a supply on my PMBus regulators (instead of having them as their own top-level regulators without an upstream supply) leads to enable-count underflow errors when disabling them: # echo 0 > /sys/bus/platform/devices/efuse01/state [ 906.094477] regulator-dummy: Underflow of regulator enable count [ 906.100563] Failed to disable vout: -EINVAL [ 136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22 Zev reports that reverting the patch fixes the problem. So let's do that for now. Fixes: 54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into macro") Cc: Marcello Sylvester Bauer Reported-by: Zev Weiss Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/pmbus.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h index 7daaf0caf4d3..10fb17879f8e 100644 --- a/drivers/hwmon/pmbus/pmbus.h +++ b/drivers/hwmon/pmbus/pmbus.h @@ -467,7 +467,6 @@ extern const struct regulator_ops pmbus_regulator_ops; #define PMBUS_REGULATOR_STEP(_name, _id, _voltages, _step) \ [_id] = { \ .name = (_name # _id), \ - .supply_name = "vin", \ .id = (_id), \ .of_match = of_match_ptr(_name # _id), \ .regulators_node = of_match_ptr("regulators"), \ -- cgit v1.2.3