From d8e235227899474976302cf272e5c2b756eb32de Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 6 Nov 2009 21:21:27 +0100 Subject: ssb-pcmcia: Fix 32bit register access in early bus scanning The scan function was using 32 bit access which does not work on 16bit CF cards. This patch corrects this by doing two 16 bit reads like ssb_pcmcia_read32 already does. mb -- Removed locking. That early in init there's no need for locking. Signed-off-by: Martin Fuzzey Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/ssb/scan.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index b74212d698c7..e8b89e8ac9bd 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid) static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, u16 offset) { + u32 lo, hi; + switch (bus->bustype) { case SSB_BUSTYPE_SSB: offset += current_coreidx * SSB_CORE_SIZE; @@ -174,7 +176,9 @@ static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, offset -= 0x800; } else ssb_pcmcia_switch_segment(bus, 0); - break; + lo = readw(bus->mmio + offset); + hi = readw(bus->mmio + offset + 2); + return lo | (hi << 16); case SSB_BUSTYPE_SDIO: offset += current_coreidx * SSB_CORE_SIZE; return ssb_sdio_scan_read32(bus, offset); -- cgit v1.2.3 From 8f611288c8db0c89447856c4c8970bb7ee535448 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 7 Nov 2009 18:37:37 +0100 Subject: b43: work around a locking issue in ->set_tim() ops->set_tim() must be atomic, so b43 trying to acquire a mutex leads to a kernel crash. This patch trades an easy to trigger crash in AP mode for an unlikely race condition. According to Michael, the real fix would be to allow set_tim() to sleep, since b43 is not the only driver that needs to sleep in all callbacks. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 86f35827f008..098dda1a67c1 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4521,9 +4521,8 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, { struct b43_wl *wl = hw_to_b43_wl(hw); - mutex_lock(&wl->mutex); + /* FIXME: add locking */ b43_update_templates(wl); - mutex_unlock(&wl->mutex); return 0; } -- cgit v1.2.3 From e1a6542f24fad84a132f79e13ca452c37df857c4 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 7 Nov 2009 19:14:47 +0100 Subject: rt2x00: update MAINTAINERS Although I have always been the active maintainer of the rt2x00 drivers, I was not mentioned explicitely in the MAINTAINERS file as such. Update the rt2x00 entry in the MAINTAINERS file to add my name and email address. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index c856aee0f1e2..b37e0cdd7632 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4280,6 +4280,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project +M: Ivo van Doorn L: linux-wireless@vger.kernel.org L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ -- cgit v1.2.3 From bcfc56a8be48501810eba992937cabdcdb989297 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 8 Nov 2009 21:59:00 -0500 Subject: ath5k: don't reset mcast filter when configuring the mode We should not zero out the multicast hash when configuring the operating mode, since a zero value means all multicast frames will get dropped. Also, ath5k_mode_setup() gets called after any reset, so the hash already set up in configure_filter() is lost. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 9c6ab5378f6e..95a8e232b58f 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1125,7 +1125,6 @@ ath5k_mode_setup(struct ath5k_softc *sc) /* configure operational mode */ ath5k_hw_set_opmode(ah); - ath5k_hw_set_mcast_filter(ah, 0, 0); ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); } -- cgit v1.2.3 From 6f9797ae22abbf6ade3eb53431e34c3c39214329 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 8 Nov 2009 21:59:01 -0500 Subject: ath5k: add LED support for HP Compaq CQ60 Add GPIO configuration for the Compaq CQ60 laptop Reported-by: David Dreggors Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/led.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index b767c3b67b24..814872f70a64 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -69,6 +69,8 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) }, /* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */ { ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) }, + /* HP Compaq CQ60-206US (ddreggors@jumptv.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) }, /* HP Compaq C700 (nitrousnrg@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) }, /* IBM-specific AR5212 (all others) */ -- cgit v1.2.3 From 1e93bd4a132661f9403b61b821810df5ba2dc0f8 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 8 Nov 2009 21:59:02 -0500 Subject: ath5k: add LED definition for BenQ Joybook R55v Setup the GPIOs for the BenQ Joybook netbook. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/led.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index 814872f70a64..b548c8eaaae1 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -63,6 +63,8 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) }, /* E-machines E510 (tuliom@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) }, + /* BenQ Joybook R55v (nowymarluk@wp.pl) */ + { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) }, /* Acer Extensa 5620z (nekoreeve@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) }, /* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */ -- cgit v1.2.3 From 3da0d662e3911ca8345f049627533eeb1a2f820a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 9 Nov 2009 16:56:06 -0600 Subject: rtl8187: Fix sparse warnings Due to a missing header include, sparse generates the following warnings: CHECK drivers/net/wireless/rtl818x/rtl8187_rfkill.c warning: symbol 'rtl8187_rfkill_init' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_poll' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_exit' was not declared. Should it be static? Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_rfkill.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c index 9fab13e4004e..cad8037ab2af 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c @@ -18,6 +18,7 @@ #include #include "rtl8187.h" +#include "rtl8187_rfkill.h" static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv) { -- cgit v1.2.3 From 866d4700150656b928f366c395bab9ab0e1a06a3 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 9 Nov 2009 18:04:12 -0800 Subject: Libertas: coding style cleanup in ethtool.c Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/ethtool.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c index 039b555e4d76..6efa3882d0a6 100644 --- a/drivers/net/wireless/libertas/ethtool.c +++ b/drivers/net/wireless/libertas/ethtool.c @@ -175,10 +175,14 @@ static int lbs_ethtool_set_wol(struct net_device *dev, if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY)) return -EOPNOTSUPP; - if (wol->wolopts & WAKE_UCAST) criteria |= EHS_WAKE_ON_UNICAST_DATA; - if (wol->wolopts & WAKE_MCAST) criteria |= EHS_WAKE_ON_MULTICAST_DATA; - if (wol->wolopts & WAKE_BCAST) criteria |= EHS_WAKE_ON_BROADCAST_DATA; - if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT; + if (wol->wolopts & WAKE_UCAST) + criteria |= EHS_WAKE_ON_UNICAST_DATA; + if (wol->wolopts & WAKE_MCAST) + criteria |= EHS_WAKE_ON_MULTICAST_DATA; + if (wol->wolopts & WAKE_BCAST) + criteria |= EHS_WAKE_ON_BROADCAST_DATA; + if (wol->wolopts & WAKE_PHY) + criteria |= EHS_WAKE_ON_MAC_EVENT; return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL); } -- cgit v1.2.3 From c3b866ad7ef9a74fc2e0d7f0c5520ad09c8536f3 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 9 Nov 2009 18:04:13 -0800 Subject: Libertas: fix issues while configuring host sleep using ethtool wol Configuration of wake-on-lan for unicast, multicast, broadcast, physical activity was not working. Kernel panic issue was there when user tries to disable WOL. Fixed them. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/ethtool.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c index 6efa3882d0a6..53d56ab83c03 100644 --- a/drivers/net/wireless/libertas/ethtool.c +++ b/drivers/net/wireless/libertas/ethtool.c @@ -169,9 +169,6 @@ static int lbs_ethtool_set_wol(struct net_device *dev, struct lbs_private *priv = dev->ml_priv; uint32_t criteria = 0; - if (priv->wol_criteria == 0xffffffff && wol->wolopts) - return -EOPNOTSUPP; - if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY)) return -EOPNOTSUPP; @@ -183,6 +180,8 @@ static int lbs_ethtool_set_wol(struct net_device *dev, criteria |= EHS_WAKE_ON_BROADCAST_DATA; if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT; + if (wol->wolopts == 0) + criteria |= EHS_REMOVE_WAKEUP; return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL); } -- cgit v1.2.3 From 73871f7181a1406c67e93c8c83f5edb26057a2a6 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 15:17:04 -0800 Subject: iwlwifi: Use RTS/CTS as the preferred protection mechanism for 6000 series When 802.11g was introduced, we had RTS/CTS and CTS-to-Self protection mechanisms. In an HT Beacon, HT stations use the "Operating Mode" field in the HT Information Element to determine whether or not to use protection. The Operating Mode field has 4 possible settings: 0-3: Mode 0: If all stations in the BSS are 20/40 MHz HT capable, or if the BSS is 20/40 MHz capable, or if all stations in the BSS are 20 MHz HT stations in a 20 MHz BSS Mode 1: used if there are non-HT stations or APs using the primary or secondary channels Mode 2: if only HT stations are associated in the BSS and at least one 20 MHz HT station is associated. Mode 3: used if one or more non-HT stations are associated in the BSS. When in operating modes 1 or 3, and the Use_Protection field is 1 in the Beacon's ERP IE, all HT transmissions must be protected using RTS/CTS or CTS-to-Self. By default, CTS-to-self is the preferred protection mechanism for less overhead and higher throughput; but using the full RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment. For 6000 series WIFI NIC, RTS/CTS protection mechanism is the recommended choice for HT traffic based on the HW design. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 5 +++++ drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 9 +++++++++ drivers/net/wireless/iwlwifi/iwl-agn.c | 10 +++++++--- drivers/net/wireless/iwlwifi/iwl-core.h | 2 ++ 4 files changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index c295b8ee9228..1473452ba22f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -175,6 +175,7 @@ struct iwl_cfg iwl6000h_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; /* @@ -198,6 +199,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6050_2agn_cfg = { @@ -218,6 +220,7 @@ struct iwl_cfg iwl6050_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6000_3agn_cfg = { @@ -238,6 +241,7 @@ struct iwl_cfg iwl6000_3agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6050_3agn_cfg = { @@ -258,6 +262,7 @@ struct iwl_cfg iwl6050_3agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 346dc06fa7b7..81726ee32858 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -418,6 +418,15 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, else if (tid == IWL_AGG_ALL_TID) for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); + if (priv->cfg->use_rts_for_ht) { + /* + * switch to RTS/CTS if it is the prefer protection method + * for HT traffic + */ + IWL_DEBUG_HT(priv, "use RTS/CTS protection for HT\n"); + priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN; + iwlcore_commit_rxon(priv); + } } static inline int get_num_of_ant_from_rate(u32 rate_n_flags) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 9b5ea8ba7216..877af443aac0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -115,9 +115,6 @@ int iwl_commit_rxon(struct iwl_priv *priv) /* always get timestamp with Rx frame */ priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK; - /* allow CTS-to-self if possible. this is relevant only for - * 5000, but will not damage 4965 */ - priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; ret = iwl_check_rxon_cmd(priv); if (ret) { @@ -217,6 +214,13 @@ int iwl_commit_rxon(struct iwl_priv *priv) "Could not send WEP static key.\n"); } + /* + * allow CTS-to-self if possible for new association. + * this is relevant only for 5000 series and up, + * but will not damage 4965 + */ + priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; + /* Apply the new configuration * RXON assoc doesn't clear the station table in uCode, */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index e50103a956b1..7754538c2194 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -213,6 +213,7 @@ struct iwl_mod_params { * @pa_type: used by 6000 series only to identify the type of Power Amplifier * @max_ll_items: max number of OTP blocks * @shadow_ram_support: shadow support for OTP memory + * @use_rts_for_ht: use rts/cts protection for HT traffic * * We enable the driver to be backward compatible wrt API version. The * driver specifies which APIs it supports (with @ucode_api_max being the @@ -255,6 +256,7 @@ struct iwl_cfg { const bool shadow_ram_support; const bool ht_greenfield_support; const bool broken_powersave; + bool use_rts_for_ht; }; /*************************** -- cgit v1.2.3 From d01032e4fd33110f9f3a085a36cb819c1dfc5827 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 15:17:05 -0800 Subject: iwlwifi: Fix issue on file transfer stalled in HT mode Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103 Signed-off-by: Wey-Yi Guy Tested-by: Jiajia Zheng Signed-off-by: Reinette Chatre Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-1000.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 2716b91ba9fa..950267ab556a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -161,5 +161,6 @@ struct iwl_cfg iwl1000_bgn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_1000, .shadow_ram_support = false, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; -- cgit v1.2.3