From dcad9f031240d59e9e1475a8e5b2cb427da94f6e Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 12 Jun 2013 11:34:30 -0600 Subject: ASoC: rt5640: add device tree support Modify the RT5640 driver to parse platform data from device tree. Write a DT binding document to describe those properties. Slight re-ordering of rt5640_i2c_probe() to better fit the DT parsing. Since ldo1_en is optional, guard usage of it with gpio_is_valid(), rather than open-coding an if (gpio) check. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rt5640.txt | 30 ++++++++++++++ sound/soc/codecs/rt5640.c | 48 +++++++++++++++++++--- 2 files changed, 72 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/rt5640.txt diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt new file mode 100644 index 000000000000..005bcb24d72d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt5640.txt @@ -0,0 +1,30 @@ +RT5640 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt5640". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Optional properties: + +- realtek,in1-differential +- realtek,in2-differential + Boolean. Indicate MIC1/2 input are differential, rather than single-ended. + +- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. + +Example: + +rt5640 { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = ; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; +}; diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 288c17cd6023..8761552882a5 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -1998,6 +1999,28 @@ static const struct i2c_device_id rt5640_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, rt5640_i2c_id); +static int rt5640_parse_dt(struct rt5640_priv *rt5640, struct device_node *np) +{ + rt5640->pdata.in1_diff = of_property_read_bool(np, + "realtek,in1-differential"); + rt5640->pdata.in2_diff = of_property_read_bool(np, + "realtek,in2-differential"); + + rt5640->pdata.ldo1_en = of_get_named_gpio(np, + "realtek,ldo1-en-gpios", 0); + /* + * LDO1_EN is optional (it may be statically tied on the board). + * -ENOENT means that the property doesn't exist, i.e. there is no + * GPIO, so is not an error. Any other error code means the property + * exists, but could not be parsed. + */ + if (!gpio_is_valid(rt5640->pdata.ldo1_en) && + (rt5640->pdata.ldo1_en != -ENOENT)) + return rt5640->pdata.ldo1_en; + + return 0; +} + static int rt5640_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -2011,6 +2034,24 @@ static int rt5640_i2c_probe(struct i2c_client *i2c, GFP_KERNEL); if (NULL == rt5640) return -ENOMEM; + i2c_set_clientdata(i2c, rt5640); + + if (pdata) { + rt5640->pdata = *pdata; + /* + * Translate zero'd out (default) pdata value to an invalid + * GPIO ID. This makes the pdata and DT paths consistent in + * terms of the value left in this field when no GPIO is + * specified, but means we can't actually use GPIO 0. + */ + if (!rt5640->pdata.ldo1_en) + rt5640->pdata.ldo1_en = -EINVAL; + } else if (i2c->dev.of_node) { + ret = rt5640_parse_dt(rt5640, i2c->dev.of_node); + if (ret) + return ret; + } else + rt5640->pdata.ldo1_en = -EINVAL; rt5640->regmap = devm_regmap_init_i2c(i2c, &rt5640_regmap); if (IS_ERR(rt5640->regmap)) { @@ -2020,12 +2061,7 @@ static int rt5640_i2c_probe(struct i2c_client *i2c, return ret; } - if (pdata) - rt5640->pdata = *pdata; - - i2c_set_clientdata(i2c, rt5640); - - if (rt5640->pdata.ldo1_en) { + if (gpio_is_valid(rt5640->pdata.ldo1_en)) { ret = devm_gpio_request_one(&i2c->dev, rt5640->pdata.ldo1_en, GPIOF_OUT_INIT_HIGH, "RT5640 LDO1_EN"); -- cgit v1.2.3