From 800c02f5d03019716a5926b73144be3bf0276923 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 23 Jun 2020 15:31:36 +0200 Subject: docs: move nommu-mmap.txt to admin-guide and rename to ReST The nommu-mmap.txt file provides description of user visible behaviuour. So, move it to the admin-guide. As it is already at the ReST, also rename it. Suggested-by: Mike Rapoport Suggested-by: Jonathan Corbet Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/3a63d1833b513700755c85bf3bda0a6c4ab56986.1592918949.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet --- Documentation/admin-guide/mm/index.rst | 1 + Documentation/admin-guide/mm/nommu-mmap.rst | 283 ++++++++++++++++++++++++++++ 2 files changed, 284 insertions(+) create mode 100644 Documentation/admin-guide/mm/nommu-mmap.rst (limited to 'Documentation/admin-guide/mm') diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst index 11db46448354..774dad6d3d29 100644 --- a/Documentation/admin-guide/mm/index.rst +++ b/Documentation/admin-guide/mm/index.rst @@ -31,6 +31,7 @@ the Linux memory management. idle_page_tracking ksm memory-hotplug + nommu-map numa_memory_policy numaperf pagemap diff --git a/Documentation/admin-guide/mm/nommu-mmap.rst b/Documentation/admin-guide/mm/nommu-mmap.rst new file mode 100644 index 000000000000..530fed08de2c --- /dev/null +++ b/Documentation/admin-guide/mm/nommu-mmap.rst @@ -0,0 +1,283 @@ +============================= +No-MMU memory mapping support +============================= + +The kernel has limited support for memory mapping under no-MMU conditions, such +as are used in uClinux environments. From the userspace point of view, memory +mapping is made use of in conjunction with the mmap() system call, the shmat() +call and the execve() system call. From the kernel's point of view, execve() +mapping is actually performed by the binfmt drivers, which call back into the +mmap() routines to do the actual work. + +Memory mapping behaviour also involves the way fork(), vfork(), clone() and +ptrace() work. Under uClinux there is no fork(), and clone() must be supplied +the CLONE_VM flag. + +The behaviour is similar between the MMU and no-MMU cases, but not identical; +and it's also much more restricted in the latter case: + + (#) Anonymous mapping, MAP_PRIVATE + + In the MMU case: VM regions backed by arbitrary pages; copy-on-write + across fork. + + In the no-MMU case: VM regions backed by arbitrary contiguous runs of + pages. + + (#) Anonymous mapping, MAP_SHARED + + These behave very much like private mappings, except that they're + shared across fork() or clone() without CLONE_VM in the MMU case. Since + the no-MMU case doesn't support these, behaviour is identical to + MAP_PRIVATE there. + + (#) File, MAP_PRIVATE, PROT_READ / PROT_EXEC, !PROT_WRITE + + In the MMU case: VM regions backed by pages read from file; changes to + the underlying file are reflected in the mapping; copied across fork. + + In the no-MMU case: + + - If one exists, the kernel will re-use an existing mapping to the + same segment of the same file if that has compatible permissions, + even if this was created by another process. + + - If possible, the file mapping will be directly on the backing device + if the backing device has the NOMMU_MAP_DIRECT capability and + appropriate mapping protection capabilities. Ramfs, romfs, cramfs + and mtd might all permit this. + + - If the backing device can't or won't permit direct sharing, + but does have the NOMMU_MAP_COPY capability, then a copy of the + appropriate bit of the file will be read into a contiguous bit of + memory and any extraneous space beyond the EOF will be cleared + + - Writes to the file do not affect the mapping; writes to the mapping + are visible in other processes (no MMU protection), but should not + happen. + + (#) File, MAP_PRIVATE, PROT_READ / PROT_EXEC, PROT_WRITE + + In the MMU case: like the non-PROT_WRITE case, except that the pages in + question get copied before the write actually happens. From that point + on writes to the file underneath that page no longer get reflected into + the mapping's backing pages. The page is then backed by swap instead. + + In the no-MMU case: works much like the non-PROT_WRITE case, except + that a copy is always taken and never shared. + + (#) Regular file / blockdev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE + + In the MMU case: VM regions backed by pages read from file; changes to + pages written back to file; writes to file reflected into pages backing + mapping; shared across fork. + + In the no-MMU case: not supported. + + (#) Memory backed regular file, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE + + In the MMU case: As for ordinary regular files. + + In the no-MMU case: The filesystem providing the memory-backed file + (such as ramfs or tmpfs) may choose to honour an open, truncate, mmap + sequence by providing a contiguous sequence of pages to map. In that + case, a shared-writable memory mapping will be possible. It will work + as for the MMU case. If the filesystem does not provide any such + support, then the mapping request will be denied. + + (#) Memory backed blockdev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE + + In the MMU case: As for ordinary regular files. + + In the no-MMU case: As for memory backed regular files, but the + blockdev must be able to provide a contiguous run of pages without + truncate being called. The ramdisk driver could do this if it allocated + all its memory as a contiguous array upfront. + + (#) Memory backed chardev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE + + In the MMU case: As for ordinary regular files. + + In the no-MMU case: The character device driver may choose to honour + the mmap() by providing direct access to the underlying device if it + provides memory or quasi-memory that can be accessed directly. Examples + of such are frame buffers and flash devices. If the driver does not + provide any such support, then the mapping request will be denied. + + +Further notes on no-MMU MMAP +============================ + + (#) A request for a private mapping of a file may return a buffer that is not + page-aligned. This is because XIP may take place, and the data may not be + paged aligned in the backing store. + + (#) A request for an anonymous mapping will always be page aligned. If + possible the size of the request should be a power of two otherwise some + of the space may be wasted as the kernel must allocate a power-of-2 + granule but will only discard the excess if appropriately configured as + this has an effect on fragmentation. + + (#) The memory allocated by a request for an anonymous mapping will normally + be cleared by the kernel before being returned in accordance with the + Linux man pages (ver 2.22 or later). + + In the MMU case this can be achieved with reasonable performance as + regions are backed by virtual pages, with the contents only being mapped + to cleared physical pages when a write happens on that specific page + (prior to which, the pages are effectively mapped to the global zero page + from which reads can take place). This spreads out the time it takes to + initialize the contents of a page - depending on the write-usage of the + mapping. + + In the no-MMU case, however, anonymous mappings are backed by physical + pages, and the entire map is cleared at allocation time. This can cause + significant delays during a userspace malloc() as the C library does an + anonymous mapping and the kernel then does a memset for the entire map. + + However, for memory that isn't required to be precleared - such as that + returned by malloc() - mmap() can take a MAP_UNINITIALIZED flag to + indicate to the kernel that it shouldn't bother clearing the memory before + returning it. Note that CONFIG_MMAP_ALLOW_UNINITIALIZED must be enabled + to permit this, otherwise the flag will be ignored. + + uClibc uses this to speed up malloc(), and the ELF-FDPIC binfmt uses this + to allocate the brk and stack region. + + (#) A list of all the private copy and anonymous mappings on the system is + visible through /proc/maps in no-MMU mode. + + (#) A list of all the mappings in use by a process is visible through + /proc//maps in no-MMU mode. + + (#) Supplying MAP_FIXED or a requesting a particular mapping address will + result in an error. + + (#) Files mapped privately usually have to have a read method provided by the + driver or filesystem so that the contents can be read into the memory + allocated if mmap() chooses not to map the backing device directly. An + error will result if they don't. This is most likely to be encountered + with character device files, pipes, fifos and sockets. + + +Interprocess shared memory +========================== + +Both SYSV IPC SHM shared memory and POSIX shared memory is supported in NOMMU +mode. The former through the usual mechanism, the latter through files created +on ramfs or tmpfs mounts. + + +Futexes +======= + +Futexes are supported in NOMMU mode if the arch supports them. An error will +be given if an address passed to the futex system call lies outside the +mappings made by a process or if the mapping in which the address lies does not +support futexes (such as an I/O chardev mapping). + + +No-MMU mremap +============= + +The mremap() function is partially supported. It may change the size of a +mapping, and may move it [#]_ if MREMAP_MAYMOVE is specified and if the new size +of the mapping exceeds the size of the slab object currently occupied by the +memory to which the mapping refers, or if a smaller slab object could be used. + +MREMAP_FIXED is not supported, though it is ignored if there's no change of +address and the object does not need to be moved. + +Shared mappings may not be moved. Shareable mappings may not be moved either, +even if they are not currently shared. + +The mremap() function must be given an exact match for base address and size of +a previously mapped object. It may not be used to create holes in existing +mappings, move parts of existing mappings or resize parts of mappings. It must +act on a complete mapping. + +.. [#] Not currently supported. + + +Providing shareable character device support +============================================ + +To provide shareable character device support, a driver must provide a +file->f_op->get_unmapped_area() operation. The mmap() routines will call this +to get a proposed address for the mapping. This may return an error if it +doesn't wish to honour the mapping because it's too long, at a weird offset, +under some unsupported combination of flags or whatever. + +The driver should also provide backing device information with capabilities set +to indicate the permitted types of mapping on such devices. The default is +assumed to be readable and writable, not executable, and only shareable +directly (can't be copied). + +The file->f_op->mmap() operation will be called to actually inaugurate the +mapping. It can be rejected at that point. Returning the ENOSYS error will +cause the mapping to be copied instead if NOMMU_MAP_COPY is specified. + +The vm_ops->close() routine will be invoked when the last mapping on a chardev +is removed. An existing mapping will be shared, partially or not, if possible +without notifying the driver. + +It is permitted also for the file->f_op->get_unmapped_area() operation to +return -ENOSYS. This will be taken to mean that this operation just doesn't +want to handle it, despite the fact it's got an operation. For instance, it +might try directing the call to a secondary driver which turns out not to +implement it. Such is the case for the framebuffer driver which attempts to +direct the call to the device-specific driver. Under such circumstances, the +mapping request will be rejected if NOMMU_MAP_COPY is not specified, and a +copy mapped otherwise. + +.. important:: + + Some types of device may present a different appearance to anyone + looking at them in certain modes. Flash chips can be like this; for + instance if they're in programming or erase mode, you might see the + status reflected in the mapping, instead of the data. + + In such a case, care must be taken lest userspace see a shared or a + private mapping showing such information when the driver is busy + controlling the device. Remember especially: private executable + mappings may still be mapped directly off the device under some + circumstances! + + +Providing shareable memory-backed file support +============================================== + +Provision of shared mappings on memory backed files is similar to the provision +of support for shared mapped character devices. The main difference is that the +filesystem providing the service will probably allocate a contiguous collection +of pages and permit mappings to be made on that. + +It is recommended that a truncate operation applied to such a file that +increases the file size, if that file is empty, be taken as a request to gather +enough pages to honour a mapping. This is required to support POSIX shared +memory. + +Memory backed devices are indicated by the mapping's backing device info having +the memory_backed flag set. + + +Providing shareable block device support +======================================== + +Provision of shared mappings on block device files is exactly the same as for +character devices. If there isn't a real device underneath, then the driver +should allocate sufficient contiguous memory to honour any supported mapping. + + +Adjusting page trimming behaviour +================================= + +NOMMU mmap automatically rounds up to the nearest power-of-2 number of pages +when performing an allocation. This can have adverse effects on memory +fragmentation, and as such, is left configurable. The default behaviour is to +aggressively trim allocations and discard any excess pages back in to the page +allocator. In order to retain finer-grained control over fragmentation, this +behaviour can either be disabled completely, or bumped up to a higher page +watermark where trimming begins. + +Page trimming behaviour is configurable via the sysctl ``vm.nr_trim_pages``. -- cgit v1.2.3