From 5e716ec68b4a75a84e28c0efa68db613deb64981 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 11 May 2021 17:01:32 +0200 Subject: docs: networking: device_drivers: fix bad usage of UTF-8 chars MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Probably because the original file was pre-processed by some tool, both i40e.rst and iavf.rst files are using this character: - U+2013 ('–'): EN DASH meaning an hyphen when calling a command line application, which is obviously wrong. So, replace them by an hyphen, ensuring that it will be properly displayed as literals when building the documentation. Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/95eb2a48d0ca3528780ce0dfce64359977fa8cb3.1620744606.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet --- Documentation/networking/device_drivers/ethernet/intel/i40e.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/networking/device_drivers/ethernet/intel/i40e.rst') diff --git a/Documentation/networking/device_drivers/ethernet/intel/i40e.rst b/Documentation/networking/device_drivers/ethernet/intel/i40e.rst index 8a9b18573688..2d3f6bd969a2 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/i40e.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/i40e.rst @@ -173,7 +173,7 @@ Director rule is added from ethtool (Sideband filter), ATR is turned off by the driver. To re-enable ATR, the sideband can be disabled with the ethtool -K option. For example:: - ethtool –K [adapter] ntuple [off|on] + ethtool -K [adapter] ntuple [off|on] If sideband is re-enabled after ATR is re-enabled, ATR remains enabled until a TCP-IP flow is added. When all TCP-IP sideband rules are deleted, ATR is @@ -688,7 +688,7 @@ shaper bw_rlimit: for each tc, sets minimum and maximum bandwidth rates. Totals must be equal or less than port speed. For example: min_rate 1Gbit 3Gbit: Verify bandwidth limit using network -monitoring tools such as ifstat or sar –n DEV [interval] [number of samples] +monitoring tools such as `ifstat` or `sar -n DEV [interval] [number of samples]` 2. Enable HW TC offload on interface:: -- cgit v1.2.3