From a1aade478862fca8710904532cbc6efed97fd05a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 4 Mar 2009 16:11:35 -0800 Subject: x86/doc: mini-howto for using earlyprintk=dbgp [ mingo: small edits and extensions. ] Signed-off-by: Yinghai Lu Cc: "Eric W. Biederman" Cc: Greg KH Cc: Randy Dunlap Cc: Alan Stern Cc: Sarah Sharp Cc: Andrew Morton LKML-Reference: <49AF18B7.4050305@kernel.org> Signed-off-by: Ingo Molnar --- Documentation/x86/earlyprintk.txt | 101 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Documentation/x86/earlyprintk.txt (limited to 'Documentation') diff --git a/Documentation/x86/earlyprintk.txt b/Documentation/x86/earlyprintk.txt new file mode 100644 index 000000000000..607b1a016064 --- /dev/null +++ b/Documentation/x86/earlyprintk.txt @@ -0,0 +1,101 @@ + +Mini-HOWTO for using the earlyprintk=dbgp boot option with a +USB2 Debug port key and a debug cable, on x86 systems. + +You need two computers, the 'USB debug key' special gadget and +and two USB cables, connected like this: + + [host/target] <-------> [USB debug key] <-------> [client/console] + +1. There are three specific hardware requirements: + + a.) Host/target system needs to have USB debug port capability. + + You can check this capability by looking at a 'Debug port' bit in + the lspci -vvv output: + + # lspci -vvv + ... + 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) + Subsystem: Lenovo ThinkPad T61 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- /proc/sysrq-trigger + + On the host/target system you should see this help line in "dmesg" output: + + SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) + + On the client/console system do: + + cat /dev/ttyUSB0 + + And you should see the help line above displayed shortly after you've + provoked it on the host system. + +If it does not work then please ask about it on the linux-kernel@vger.kernel.org +mailing list or contact the x86 maintainers. -- cgit v1.2.3