From addf7efec23af2b67547800aa232d551945e7de2 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 26 Aug 2022 11:39:22 +0300 Subject: ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220826083927.3107272-5-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 76b2025c67b4..342fcfd974d7 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -76,8 +76,8 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -95,8 +95,8 @@ vddio_ddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -118,8 +118,8 @@ vdd_core: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -160,8 +160,8 @@ LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { @@ -175,8 +175,8 @@ LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { -- cgit v1.2.3 From 7737d93666eea282febf95e5fa3b3fde1f2549f3 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 26 Aug 2022 11:39:23 +0300 Subject: ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220826083927.3107272-6-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama5d2_icp.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 6865be8d7787..6296e3ffd303 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -196,8 +196,8 @@ regulators { vdd_io_reg: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -215,8 +215,8 @@ VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -234,8 +234,8 @@ VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -272,8 +272,8 @@ LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; regulator-always-on; regulator-state-standby { @@ -287,8 +287,8 @@ LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { -- cgit v1.2.3 From 7f41d52ced9e1b7ed4ff8e1ae9cacbf46b64e6db Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 26 Aug 2022 11:39:24 +0300 Subject: ARM: dts: at91: sama7g5ek: specify proper regulator output ranges Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220826083927.3107272-7-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama7g5ek.dts | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index de44da2e4aae..3b25c67795dd 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -244,8 +244,8 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -264,8 +264,8 @@ vddioddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1450000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -285,8 +285,8 @@ vddcore: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -306,7 +306,7 @@ vddcpu: VDD_OTHER { regulator-name = "VDD_OTHER"; regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1850000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-ramp-delay = <3125>; @@ -326,8 +326,8 @@ vldo1: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; regulator-state-standby { -- cgit v1.2.3 From 617a0d9fe6867bf5b3b7272629cd780c27c877d9 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 26 Aug 2022 11:39:25 +0300 Subject: ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time ldo2 is not used by any consumer on sama5d27_wlsom1 board, thus don't keep it enabled all the time. Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220826083927.3107272-8-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 342fcfd974d7..83bcf9fe0152 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -177,7 +177,6 @@ regulator-name = "LDO2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - regulator-always-on; regulator-state-standby { regulator-on-in-suspend; -- cgit v1.2.3 From 3d074b750d2b4c91962f10ea1df1c289ce0d3ce8 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 26 Aug 2022 11:39:26 +0300 Subject: ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time VDD_OTHER is not connected to any on board consumer thus it is not needed to keep it enabled all the time. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220826083927.3107272-9-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sama5d2_icp.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 6296e3ffd303..dd1dec9d4e07 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -257,7 +257,6 @@ regulator-max-microvolt = <1850000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; - regulator-always-on; regulator-state-standby { regulator-on-in-suspend; -- cgit v1.2.3