From 0ef831b1ff1ff0bcd8bf5b1890913ef6bb263250 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 20 Jun 2006 21:33:02 +0900 Subject: [MIPS] Removes unused functions for GT64120 Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/gt64120/common/Makefile | 1 - arch/mips/gt64120/common/pci.c | 147 -------------------------------------- 2 files changed, 148 deletions(-) delete mode 100644 arch/mips/gt64120/common/pci.c (limited to 'arch/mips/gt64120') diff --git a/arch/mips/gt64120/common/Makefile b/arch/mips/gt64120/common/Makefile index eba5051015a5..1ef676e22ab4 100644 --- a/arch/mips/gt64120/common/Makefile +++ b/arch/mips/gt64120/common/Makefile @@ -3,4 +3,3 @@ # obj-y += time.o -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/gt64120/common/pci.c b/arch/mips/gt64120/common/pci.c deleted file mode 100644 index e9e5419a0d53..000000000000 --- a/arch/mips/gt64120/common/pci.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Galileo Evaluation Boards PCI support. - * - * The general-purpose functions to read/write and configure the GT64120A's - * PCI registers (function names start with pci0 or pci1) are either direct - * copies of functions written by Galileo Technology, or are modifications - * of their functions to work with Linux 2.4 vs Linux 2.2. These functions - * are Copyright - Galileo Technology. - * - * Other functions are derived from other MIPS PCI implementations, or were - * written by RidgeRun, Inc, Copyright (C) 2000 RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include - -#define SELF 0 - -/* - * pciXReadConfigReg - Read from a PCI configuration register - * - Make sure the GT is configured as a master before - * reading from another device on the PCI. - * - The function takes care of Big/Little endian conversion. - * INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI - * spec) - * pciDevNum: The device number needs to be addressed. - * RETURNS: data , if the data == 0xffffffff check the master abort bit in the - * cause register to make sure the data is valid - * - * Configuration Address 0xCF8: - * - * 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number - * |congif|Reserved| Bus |Device|Function|Register|00| - * |Enable| |Number|Number| Number | Number | | <=field Name - * - */ -static unsigned int pci0ReadConfigReg(int offset, struct pci_dev *device) -{ - unsigned int DataForRegCf8; - unsigned int data; - - DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) | - (PCI_FUNC(device->devfn) << 8) | - (offset & ~0x3)) | 0x80000000; - GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8); - - /* - * The casual observer might wonder why the READ is duplicated here, - * rather than immediately following the WRITE, and just have the swap - * in the "if". That's because there is a latency problem with trying - * to read immediately after setting up the address register. The "if" - * check gives enough time for the address to stabilize, so the READ - * can work. - */ - if (PCI_SLOT(device->devfn) == SELF) /* This board */ - return GT_READ(GT_PCI0_CFGDATA_OFS); - else /* PCI is little endian so swap the Data. */ - return __GT_READ(GT_PCI0_CFGDATA_OFS); -} - -/* - * pciXWriteConfigReg - Write to a PCI configuration register - * - Make sure the GT is configured as a master before - * writingto another device on the PCI. - * - The function takes care of Big/Little endian conversion. - * Inputs: unsigned int regOffset: The register offset as it apears in the - * GT spec - * (or any other PCI device spec) - * pciDevNum: The device number needs to be addressed. - * - * Configuration Address 0xCF8: - * - * 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number - * |congif|Reserved| Bus |Device|Function|Register|00| - * |Enable| |Number|Number| Number | Number | | <=field Name - * - */ -static void pci0WriteConfigReg(unsigned int offset, - struct pci_dev *device, unsigned int data) -{ - unsigned int DataForRegCf8; - - DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) | - (PCI_FUNC(device->devfn) << 8) | - (offset & ~0x3)) | 0x80000000; - GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8); - - if (PCI_SLOT(device->devfn) == SELF) /* This board */ - GT_WRITE(GT_PCI0_CFGDATA_OFS, data); - else /* configuration Transaction over the pci. */ - __GT_WRITE(GT_PCI0_CFGDATA_OFS, data); -} - -extern struct pci_ops gt64120_pci_ops; - -void __init pcibios_init(void) -{ - u32 tmp; - struct pci_dev controller; - - controller.devfn = SELF; - - tmp = GT_READ(GT_PCI0_CMD_OFS); /* Huh??? -- Ralf */ - tmp = GT_READ(GT_PCI0_BARE_OFS); - - /* - * You have to enable bus mastering to configure any other - * card on the bus. - */ - tmp = pci0ReadConfigReg(PCI_COMMAND, &controller); - tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR; - pci0WriteConfigReg(PCI_COMMAND, &controller, tmp); - - /* - * Reset PCI I/O and PCI MEM values to ones supported by EVM. - */ - ioport_resource.start = GT_PCI_IO_BASE; - ioport_resource.end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1; - iomem_resource.start = GT_PCI_MEM_BASE; - iomem_resource.end = GT_PCI_MEM_BASE + GT_PCI_MEM_SIZE - 1; - - pci_scan_bus(0, >64120_pci_ops, NULL); -} -- cgit v1.2.3