From 991cfffa7c19aa648546aff666595af896e568ba Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Fri, 3 Dec 2010 11:51:37 +0800 Subject: x86, earlyprintk: Move mrst early console to platform/ and fix a typo Move the code to arch/x86/platform/mrst/. Also fix a typo to use the correct config option: ONFIG_EARLY_PRINTK_MRST Signed-off-by: Feng Tang Cc: alan@linux.intel.com LKML-Reference: <1291348298-21263-1-git-send-email-feng.tang@intel.com> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 1 - arch/x86/kernel/early_printk.c | 3 +- arch/x86/kernel/early_printk_mrst.c | 319 ------------------------------------ 3 files changed, 1 insertion(+), 322 deletions(-) delete mode 100644 arch/x86/kernel/early_printk_mrst.c (limited to 'arch/x86/kernel') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 9e13763b6092..f60153d5de57 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -84,7 +84,6 @@ obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_APB_TIMER) += apb_timer.o diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 4572f25f9325..cd28a350f7f9 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -240,7 +240,7 @@ static int __init setup_early_printk(char *buf) if (!strncmp(buf, "xen", 3)) early_console_register(&xenboot_console, keep); #endif -#ifdef CONFIG_X86_MRST_EARLY_PRINTK +#ifdef CONFIG_EARLY_PRINTK_MRST if (!strncmp(buf, "mrst", 4)) { mrst_early_console_init(); early_console_register(&early_mrst_console, keep); @@ -250,7 +250,6 @@ static int __init setup_early_printk(char *buf) hsu_early_console_init(); early_console_register(&early_hsu_console, keep); } - #endif buf++; } diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/kernel/early_printk_mrst.c deleted file mode 100644 index 65df603622b2..000000000000 --- a/arch/x86/kernel/early_printk_mrst.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * early_printk_mrst.c - early consoles for Intel MID platforms - * - * Copyright (c) 2008-2010, Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -/* - * This file implements two early consoles named mrst and hsu. - * mrst is based on Maxim3110 spi-uart device, it exists in both - * Moorestown and Medfield platforms, while hsu is based on a High - * Speed UART device which only exists in the Medfield platform - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define MRST_SPI_TIMEOUT 0x200000 -#define MRST_REGBASE_SPI0 0xff128000 -#define MRST_REGBASE_SPI1 0xff128400 -#define MRST_CLK_SPI0_REG 0xff11d86c - -/* Bit fields in CTRLR0 */ -#define SPI_DFS_OFFSET 0 - -#define SPI_FRF_OFFSET 4 -#define SPI_FRF_SPI 0x0 -#define SPI_FRF_SSP 0x1 -#define SPI_FRF_MICROWIRE 0x2 -#define SPI_FRF_RESV 0x3 - -#define SPI_MODE_OFFSET 6 -#define SPI_SCPH_OFFSET 6 -#define SPI_SCOL_OFFSET 7 -#define SPI_TMOD_OFFSET 8 -#define SPI_TMOD_TR 0x0 /* xmit & recv */ -#define SPI_TMOD_TO 0x1 /* xmit only */ -#define SPI_TMOD_RO 0x2 /* recv only */ -#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ - -#define SPI_SLVOE_OFFSET 10 -#define SPI_SRL_OFFSET 11 -#define SPI_CFS_OFFSET 12 - -/* Bit fields in SR, 7 bits */ -#define SR_MASK 0x7f /* cover 7 bits */ -#define SR_BUSY (1 << 0) -#define SR_TF_NOT_FULL (1 << 1) -#define SR_TF_EMPT (1 << 2) -#define SR_RF_NOT_EMPT (1 << 3) -#define SR_RF_FULL (1 << 4) -#define SR_TX_ERR (1 << 5) -#define SR_DCOL (1 << 6) - -struct dw_spi_reg { - u32 ctrl0; - u32 ctrl1; - u32 ssienr; - u32 mwcr; - u32 ser; - u32 baudr; - u32 txfltr; - u32 rxfltr; - u32 txflr; - u32 rxflr; - u32 sr; - u32 imr; - u32 isr; - u32 risr; - u32 txoicr; - u32 rxoicr; - u32 rxuicr; - u32 msticr; - u32 icr; - u32 dmacr; - u32 dmatdlr; - u32 dmardlr; - u32 idr; - u32 version; - - /* Currently operates as 32 bits, though only the low 16 bits matter */ - u32 dr; -} __packed; - -#define dw_readl(dw, name) __raw_readl(&(dw)->name) -#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name) - -/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */ -static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0; - -static u32 *pclk_spi0; -/* Always contains an accessable address, start with 0 */ -static struct dw_spi_reg *pspi; - -static struct kmsg_dumper dw_dumper; -static int dumper_registered; - -static void dw_kmsg_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *s1, unsigned long l1, - const char *s2, unsigned long l2) -{ - int i; - - /* When run to this, we'd better re-init the HW */ - mrst_early_console_init(); - - for (i = 0; i < l1; i++) - early_mrst_console.write(&early_mrst_console, s1 + i, 1); - for (i = 0; i < l2; i++) - early_mrst_console.write(&early_mrst_console, s2 + i, 1); -} - -/* Set the ratio rate to 115200, 8n1, IRQ disabled */ -static void max3110_write_config(void) -{ - u16 config; - - config = 0xc001; - dw_writel(pspi, dr, config); -} - -/* Translate char to a eligible word and send to max3110 */ -static void max3110_write_data(char c) -{ - u16 data; - - data = 0x8000 | c; - dw_writel(pspi, dr, data); -} - -void mrst_early_console_init(void) -{ - u32 ctrlr0 = 0; - u32 spi0_cdiv; - u32 freq; /* Freqency info only need be searched once */ - - /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */ - pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - MRST_CLK_SPI0_REG); - spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9; - freq = 100000000 / (spi0_cdiv + 1); - - if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL) - mrst_spi_paddr = MRST_REGBASE_SPI1; - - pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - mrst_spi_paddr); - - /* Disable SPI controller */ - dw_writel(pspi, ssienr, 0); - - /* Set control param, 8 bits, transmit only mode */ - ctrlr0 = dw_readl(pspi, ctrl0); - - ctrlr0 &= 0xfcc0; - ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET) - | (SPI_TMOD_TO << SPI_TMOD_OFFSET); - dw_writel(pspi, ctrl0, ctrlr0); - - /* - * Change the spi0 clk to comply with 115200 bps, use 100000 to - * calculate the clk dividor to make the clock a little slower - * than real baud rate. - */ - dw_writel(pspi, baudr, freq/100000); - - /* Disable all INT for early phase */ - dw_writel(pspi, imr, 0x0); - - /* Set the cs to spi-uart */ - dw_writel(pspi, ser, 0x2); - - /* Enable the HW, the last step for HW init */ - dw_writel(pspi, ssienr, 0x1); - - /* Set the default configuration */ - max3110_write_config(); - - /* Register the kmsg dumper */ - if (!dumper_registered) { - dw_dumper.dump = dw_kmsg_dump; - kmsg_dump_register(&dw_dumper); - dumper_registered = 1; - } -} - -/* Slave select should be called in the read/write function */ -static void early_mrst_spi_putc(char c) -{ - unsigned int timeout; - u32 sr; - - timeout = MRST_SPI_TIMEOUT; - /* Early putc needs to make sure the TX FIFO is not full */ - while (--timeout) { - sr = dw_readl(pspi, sr); - if (!(sr & SR_TF_NOT_FULL)) - cpu_relax(); - else - break; - } - - if (!timeout) - pr_warning("MRST earlycon: timed out\n"); - else - max3110_write_data(c); -} - -/* Early SPI only uses polling mode */ -static void early_mrst_spi_write(struct console *con, const char *str, unsigned n) -{ - int i; - - for (i = 0; i < n && *str; i++) { - if (*str == '\n') - early_mrst_spi_putc('\r'); - early_mrst_spi_putc(*str); - str++; - } -} - -struct console early_mrst_console = { - .name = "earlymrst", - .write = early_mrst_spi_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* - * Following is the early console based on Medfield HSU (High - * Speed UART) device. - */ -#define HSU_PORT2_PADDR 0xffa28180 - -static void __iomem *phsu; - -void hsu_early_console_init(void) -{ - u8 lcr; - - phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - HSU_PORT2_PADDR); - - /* Disable FIFO */ - writeb(0x0, phsu + UART_FCR); - - /* Set to default 115200 bps, 8n1 */ - lcr = readb(phsu + UART_LCR); - writeb((0x80 | lcr), phsu + UART_LCR); - writeb(0x18, phsu + UART_DLL); - writeb(lcr, phsu + UART_LCR); - writel(0x3600, phsu + UART_MUL*4); - - writeb(0x8, phsu + UART_MCR); - writeb(0x7, phsu + UART_FCR); - writeb(0x3, phsu + UART_LCR); - - /* Clear IRQ status */ - readb(phsu + UART_LSR); - readb(phsu + UART_RX); - readb(phsu + UART_IIR); - readb(phsu + UART_MSR); - - /* Enable FIFO */ - writeb(0x7, phsu + UART_FCR); -} - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static void early_hsu_putc(char ch) -{ - unsigned int timeout = 10000; /* 10ms */ - u8 status; - - while (--timeout) { - status = readb(phsu + UART_LSR); - if (status & BOTH_EMPTY) - break; - udelay(1); - } - - /* Only write the char when there was no timeout */ - if (timeout) - writeb(ch, phsu + UART_TX); -} - -static void early_hsu_write(struct console *con, const char *str, unsigned n) -{ - int i; - - for (i = 0; i < n && *str; i++) { - if (*str == '\n') - early_hsu_putc('\r'); - early_hsu_putc(*str); - str++; - } -} - -struct console early_hsu_console = { - .name = "earlyhsu", - .write = early_hsu_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; -- cgit v1.2.3