From c26dc9c3a44104b394b9e6b2f3af0f83ba32af1c Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Fri, 25 Mar 2011 12:52:47 -0300
Subject: ARM: mx53: Print silicon revision on boot
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Having the silicon revision to appear on the boot log is a useful information.

MX31, MX35 and MX51 already show the silicon revision on boot.

Add support for displaying such information for MX53 as well.

Tested on a mx53loco board, where it shows:

CPU identified as i.MX53, silicon rev 2.0

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
LAKML-Reference: 1301068367-18937-1-git-send-email-fabio.estevam@freescale.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/clock-mx51-mx53.c     |  1 +
 arch/arm/mach-mx5/cpu.c                 | 23 +++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/common.h |  1 +
 arch/arm/plat-mxc/include/mach/mx53.h   | 13 -------------
 4 files changed, 25 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index fdbc05ed5513..6b89c1bf4eb2 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1563,6 +1563,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&iim_clk);
 	mx53_revision();
 	clk_disable(&iim_clk);
+	mx53_display_revision();
 
 	/* Set SDHC parents to be PLL2 */
 	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 472bdfab2e55..86f87da59c64 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -166,6 +166,29 @@ int mx50_revision(void)
 }
 EXPORT_SYMBOL(mx50_revision);
 
+void mx53_display_revision(void)
+{
+	int rev;
+	char *srev;
+	rev = mx53_revision();
+
+	switch (rev) {
+	case IMX_CHIP_REVISION_1_0:
+		srev = IMX_CHIP_REVISION_1_0_STRING;
+		break;
+	case IMX_CHIP_REVISION_2_0:
+		srev = IMX_CHIP_REVISION_2_0_STRING;
+		break;
+	case IMX_CHIP_REVISION_2_1:
+		srev = IMX_CHIP_REVISION_2_1_STRING;
+		break;
+	default:
+		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
+	}
+	printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev);
+}
+EXPORT_SYMBOL(mx53_display_revision);
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index a22ebe11a602..bfa1ffca5d79 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -68,4 +68,5 @@ extern void mxc91231_arch_reset(int, const char *);
 extern void mxc91231_prepare_idle(void);
 extern void mx51_efikamx_reset(void);
 extern int mx53_revision(void);
+extern int mx53_display_revision(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index ace17864575e..9d2a1ef84de2 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -337,17 +337,4 @@
 #define MX53_INT_GPIO7_LOW	107
 #define MX53_INT_GPIO7_HIGH	108
 
-/* silicon revisions specific to i.MX53 */
-#define MX53_CHIP_REV_1_0		0x10
-#define MX53_CHIP_REV_1_1		0x11
-#define MX53_CHIP_REV_1_2		0x12
-#define MX53_CHIP_REV_1_3		0x13
-#define MX53_CHIP_REV_2_0		0x20
-#define MX53_CHIP_REV_2_1		0x21
-#define MX53_CHIP_REV_2_2		0x22
-#define MX53_CHIP_REV_2_3		0x23
-#define MX53_CHIP_REV_3_0		0x30
-#define MX53_CHIP_REV_3_1		0x31
-#define MX53_CHIP_REV_3_2		0x32
-
 #endif /* ifndef __MACH_MX53_H__ */
-- 
cgit v1.2.3


From 8bc5c0bc9095aa8a1af4ee3b8cb2864d384b2a54 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Thu, 17 Mar 2011 12:55:57 -0300
Subject: ARM: mx5/babbage: Use gpio_request_one in babbage_usbhub_reset
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Current code inside babbage_usbhub_reset uses gpio_direction_output with initial value of the GPIO and also sets
the GPIO value via gpio_set_value to the same level right after. This is not needed.

By using gpio_request_one it is possible to set the direction and initial value in one shot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
LAKML-Reference: 1300377359-23212-2-git-send-email-fabio.estevam@freescale.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/board-mx51_babbage.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index bea4e4135f9d..ab50aa9d268c 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -208,18 +208,16 @@ static inline void babbage_usbhub_reset(void)
 {
 	int ret;
 
-	/* Bring USB hub out of reset */
-	ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7");
+	/* Reset USB hub */
+	ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
+					GPIOF_OUT_INIT_LOW, "GPIO1_7");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
 		return;
 	}
-	gpio_direction_output(BABBAGE_USB_HUB_RESET, 0);
 
-	/* USB HUB RESET - De-assert USB HUB RESET_N */
-	msleep(1);
-	gpio_set_value(BABBAGE_USB_HUB_RESET, 0);
-	msleep(1);
+	msleep(2);
+	/* Deassert reset */
 	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
 }
 
-- 
cgit v1.2.3


From fbaa769f1268c1a74824786bce1b3ce8156dd8c9 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@freescale.com>
Date: Sat, 26 Feb 2011 23:19:04 +0800
Subject: ARM: mach-imx: mx25_3ds: add write-protect and card-detect for SD
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
LAKML-Reference: 1298733544-24659-1-git-send-email-shawn.guo@freescale.com
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
[ukl: fixup conflict with ff86452 (ARM: mx25_3ds: Add I2C support) and
drop #inclusion of <mach/esdhc.h>]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/mach-mx25_3ds.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 06da438282aa..378f4334378c 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -103,6 +103,8 @@ static iomux_v3_cfg_t mx25pdk_pads[] = {
 	MX25_PAD_SD1_DATA1__SD1_DATA1,
 	MX25_PAD_SD1_DATA2__SD1_DATA2,
 	MX25_PAD_SD1_DATA3__SD1_DATA3,
+	MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
+	MX25_PAD_A15__GPIO_2_1, /* CardDetect */
 
 	/* I2C1 */
 	MX25_PAD_I2C1_CLK__I2C1_CLK,
@@ -208,6 +210,14 @@ static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
 
+#define SD1_GPIO_WP	IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_CD	IMX_GPIO_NR(2, 1)
+
+static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
+	.wp_gpio = SD1_GPIO_WP,
+	.cd_gpio = SD1_GPIO_CD,
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -225,7 +235,7 @@ static void __init mx25pdk_init(void)
 	imx25_add_fec(&mx25_fec_pdata);
 	imx25_add_imx_keypad(&mx25pdk_keymap_data);
 
-	imx25_add_sdhci_esdhc_imx(0, NULL);
+	imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
 	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
 }
 
-- 
cgit v1.2.3


From e02cdeee107aca1168844c61fed62ffc867c080e Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Mon, 28 Feb 2011 18:04:33 +0100
Subject: ARM: imx: use imx_add_gpio_keys to register "gpio-keys" devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

LAKML-Reference: 1302207841-12450-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/Kconfig                      |  2 ++
 arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 15 +++------------
 arch/arm/mach-imx/mach-imx27_visstrim_m10.c    | 14 +++-----------
 arch/arm/mach-mx3/Kconfig                      |  4 ++++
 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c   | 15 +++------------
 arch/arm/mach-mx3/mach-armadillo5x0.c          | 15 +++------------
 arch/arm/mach-mx3/mach-pcm037_eet.c            | 15 +++------------
 arch/arm/mach-mx3/mach-vpr200.c                | 12 +++---------
 arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c   | 15 +++------------
 9 files changed, 27 insertions(+), 80 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 56b930a13443..4ac00e9fdbe8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -129,6 +129,7 @@ choice
 
 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -254,6 +255,7 @@ config MACH_MX27_3DS
 config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
 	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index 6269053505f7..176e61bf44b6 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -22,7 +22,6 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <video/platform_lcd.h>
 
@@ -208,23 +207,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
 	.buttons	= eukrea_mbimxsd_gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device eukrea_mbimxsd_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &eukrea_mbimxsd_button_data,
-	}
-};
-
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_button_device,
 	&eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -299,4 +289,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index d7e0d219726a..7ae43b1ec517 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -27,7 +27,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
@@ -130,19 +129,12 @@ static struct gpio_keys_button visstrim_gpio_keys[] = {
 	}
 };
 
-static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = {
+static const struct gpio_keys_platform_data
+		visstrim_gpio_keys_platform_data __initconst = {
 	.buttons	= visstrim_gpio_keys,
 	.nbuttons	= ARRAY_SIZE(visstrim_gpio_keys),
 };
 
-static struct platform_device visstrim_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &visstrim_gpio_keys_platform_data,
-	},
-};
-
 /* Visstrim_SM10 has a microSD slot connected to sdhc1 */
 static int visstrim_m10_sdhc1_init(struct device *dev,
 		irq_handler_t detect_irq, void *data)
@@ -186,7 +178,6 @@ static struct platform_device visstrim_m10_nor_mtd_device = {
 };
 
 static struct platform_device *platform_devices[] __initdata = {
-	&visstrim_gpio_keys_device,
 	&visstrim_m10_nor_mtd_device,
 };
 
@@ -255,6 +246,7 @@ static void __init visstrim_m10_board_init(void)
 	imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
 	imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
 	imx27_add_fec(NULL);
+	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 340809a7d233..b0831efadefc 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -68,6 +68,7 @@ config MACH_PCM037
 config MACH_PCM037_EET
 	bool "Support pcm037 EET board extensions"
 	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Add support for PCM037 EET baseboard extensions. If you are using the
@@ -168,6 +169,7 @@ config MACH_PCM043
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
 	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -233,6 +235,7 @@ choice
 
 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -244,6 +247,7 @@ config MACH_VPR200
 	bool "Support VPR200 platform"
 	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_I2C
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 2e288b38b4ad..63981ca8fc31 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -26,7 +26,6 @@
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <video/platform_lcd.h>
 #include <linux/i2c.h>
@@ -223,23 +222,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
 	.buttons	= eukrea_mbimxsd_gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device eukrea_mbimxsd_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &eukrea_mbimxsd_button_data,
-	}
-};
-
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_button_device,
 	&eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -315,4 +305,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 226829bf7c25..ace0c4c3b662 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -34,7 +34,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
 #include <linux/input.h>
-#include <linux/gpio_keys.h>
 #include <linux/i2c.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -280,20 +279,12 @@ static struct gpio_keys_button armadillo5x0_buttons[] = {
 	}
 };
 
-static struct gpio_keys_platform_data armadillo5x0_button_data = {
+static const struct gpio_keys_platform_data
+		armadillo5x0_button_data __initconst = {
 	.buttons	= armadillo5x0_buttons,
 	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
 };
 
-static struct platform_device armadillo5x0_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &armadillo5x0_button_data,
-	}
-};
-
 /*
  * NAND Flash
  */
@@ -496,7 +487,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
-	&armadillo5x0_button_device,
 };
 
 /*
@@ -508,6 +498,7 @@ static void __init armadillo5x0_init(void)
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx_add_gpio_keys(&armadillo5x0_button_data);
 	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index df6fb07d037e..3f81e357affb 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -7,7 +7,6 @@
  * published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
@@ -156,20 +155,13 @@ static struct gpio_keys_button pcm037_gpio_keys[] = {
 	},
 };
 
-static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+static const struct gpio_keys_platform_data
+		pcm037_gpio_keys_platform_data __initconst = {
 	.buttons	= pcm037_gpio_keys,
 	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
 	.rep		= 0, /* No auto-repeat */
 };
 
-static struct platform_device pcm037_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &pcm037_gpio_keys_platform_data,
-	},
-};
-
 static int __init eet_init_devices(void)
 {
 	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
@@ -182,9 +174,8 @@ static int __init eet_init_devices(void)
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 	imx31_add_spi_imx0(&pcm037_spi1_pdata);
 
-	platform_device_register(&pcm037_gpio_keys_device);
+	imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
 
 	return 0;
 }
-
 late_initcall(eet_init_devices);
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
index 47a69cbc31a8..d7d190eacdcd 100644
--- a/arch/arm/mach-mx3/mach-vpr200.c
+++ b/arch/arm/mach-mx3/mach-vpr200.c
@@ -141,18 +141,12 @@ static struct gpio_keys_button vpr200_gpio_keys_table[] = {
 	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
 };
 
-static struct gpio_keys_platform_data vpr200_gpio_keys_data = {
+static const struct gpio_keys_platform_data
+		vpr200_gpio_keys_data __initconst = {
 	.buttons = vpr200_gpio_keys_table,
 	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
 };
 
-static struct platform_device vpr200_device_gpiokeys = {
-	.name = "gpio-keys",
-	.dev = {
-		.platform_data = &vpr200_gpio_keys_data,
-	}
-};
-
 static struct mc13xxx_platform_data vpr200_pmic = {
 	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
 };
@@ -271,7 +265,6 @@ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
 
 static struct platform_device *devices[] __initdata = {
 	&vpr200_flash,
-	&vpr200_device_gpiokeys,
 };
 
 /*
@@ -283,6 +276,7 @@ static void __init vpr200_board_init(void)
 
 	imx35_add_fec(NULL);
 	imx35_add_imx2_wdt(NULL);
+	imx_add_gpio_keys(&vpr200_gpio_keys_data);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index e6c1119c20ae..0c80b62ed786 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -27,7 +27,6 @@
 #include <linux/irq.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
 
@@ -108,23 +107,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
 	.buttons	= eukrea_mbimxsd_gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device eukrea_mbimxsd_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &eukrea_mbimxsd_button_data,
-	}
-};
-
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_button_device,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -166,4 +156,5 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }
-- 
cgit v1.2.3


From d317c05f112814bfacf18f479998982529dd010e Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Mon, 4 Apr 2011 16:23:20 +0200
Subject: ARM: imx: remove #includes already available from devices-common.h
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Most machine files include "devices-imxXX.h" which in turn includes
<mach/devices-common.h>.  The latter already includes many headers
that the machine files don't need to include again.

These were found by:

 $ grep \#include arch/arm/plat-mxc/include/mach/devices-common.h > tmpfile
 $ git grep -l 'devices-imx' arch/arm | xargs grep -f tmpfile -F

(but I kept linux/init.h, linux/kernel.h and linux/platform_device.h)

LAKML-Reference: 1298912674-15153-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c   | 1 -
 arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 2 --
 arch/arm/mach-imx/mach-cpuimx27.c              | 1 -
 arch/arm/mach-imx/mach-eukrea_cpuimx25.c       | 2 --
 arch/arm/mach-imx/mach-mx1ads.c                | 1 -
 arch/arm/mach-imx/mach-mx21ads.c               | 1 -
 arch/arm/mach-imx/mach-mx25_3ds.c              | 1 -
 arch/arm/mach-imx/mach-mx27ads.c               | 1 -
 arch/arm/mach-imx/mach-mxt_td60.c              | 1 -
 arch/arm/mach-imx/mach-pca100.c                | 1 -
 arch/arm/mach-imx/mach-pcm038.c                | 1 -
 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c   | 2 --
 arch/arm/mach-mx3/mach-bug.c                   | 1 -
 arch/arm/mach-mx3/mach-cpuimx35.c              | 1 -
 arch/arm/mach-mx3/mach-mx31_3ds.c              | 1 -
 arch/arm/mach-mx3/mach-mx31moboard.c           | 1 -
 arch/arm/mach-mx3/mach-pcm037_eet.c            | 1 -
 arch/arm/mach-mx3/mach-pcm043.c                | 1 -
 arch/arm/mach-mx3/mach-vpr200.c                | 1 -
 arch/arm/mach-mx3/mx31moboard-marxbot.c        | 1 -
 arch/arm/mach-mx5/board-cpuimx51.c             | 2 --
 arch/arm/mach-mx5/board-cpuimx51sd.c           | 2 --
 arch/arm/mach-mx5/board-mx50_rdp.c             | 1 -
 arch/arm/mach-mx5/board-mx51_babbage.c         | 4 ----
 arch/arm/mach-mx5/board-mx51_efikamx.c         | 3 ---
 arch/arm/mach-mx5/board-mx51_efikasb.c         | 3 ---
 arch/arm/mach-mx5/board-mx53_evk.c             | 2 --
 arch/arm/mach-mx5/board-mx53_loco.c            | 2 --
 arch/arm/mach-mx5/board-mx53_smd.c             | 2 --
 arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c   | 2 --
 arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c   | 1 -
 arch/arm/mach-mx5/mx51_efika.c                 | 3 ---
 32 files changed, 50 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index fa5288018ba7..5911281da5f5 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -32,7 +32,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 #include <mach/hardware.h>
-#include <mach/spi.h>
 #include <mach/audmux.h>
 
 #include "devices-imx27.h"
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index 176e61bf44b6..f9ef04acdab1 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -31,9 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/mx25.h>
-#include <mach/imx-uart.h>
 #include <mach/audmux.h>
-#include <mach/esdhc.h>
 
 #include "devices-imx25.h"
 
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 759299bb035b..46a2e41d43d2 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -38,7 +38,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 9da8d18eeb00..148cff2819b9 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -36,8 +36,6 @@
 #include <asm/mach/map.h>
 #include <mach/common.h>
 #include <mach/mx25.h>
-#include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
 #include <mach/iomux-mx25.h>
 
 #include "devices-imx25.h"
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 47cf56ac6d5b..38ec5cbbda9b 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -25,7 +25,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index fa52a1086eae..74ac88978ddd 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -25,7 +25,6 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <mach/iomux-mx21.h>
-#include <mach/mxc_nand.h>
 
 #include "devices-imx21.h"
 
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 378f4334378c..58ea3fdf0911 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -29,7 +29,6 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 367d1e4384c7..1db79506f5e4 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -29,7 +29,6 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 
 #include "devices-imx27.h"
 
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 69787c30c320..2774541511e7 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -29,7 +29,6 @@
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 #include <linux/i2c/pca953x.h>
 
 #include "devices-imx27.h"
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 63e182556778..bbddc5a11c43 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -37,7 +37,6 @@
 #include <mach/iomux-mx27.h>
 #include <asm/mach/time.h>
 #include <mach/audmux.h>
-#include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/ulpi.h>
 
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 4cbce6d0fef1..853bb871c7ed 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -36,7 +36,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 63981ca8fc31..f61b2a923826 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -37,12 +37,10 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/audmux.h>
-#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-mx3/mach-bug.c
index d137d7078ee9..42e4f078a19c 100644
--- a/arch/arm/mach-mx3/mach-bug.c
+++ b/arch/arm/mach-mx3/mach-bug.c
@@ -20,7 +20,6 @@
 #include <linux/platform_device.h>
 
 #include <mach/iomux-mx3.h>
-#include <mach/imx-uart.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index ec63d998f647..ae13fd73a810 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -41,7 +41,6 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
-#include <mach/mxc_nand.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 034be624d35c..477b2d274396 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -39,7 +39,6 @@
 #include <mach/iomux-mx3.h>
 #include <mach/3ds_debugboard.h>
 #include <mach/ulpi.h>
-#include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/mx3_camera.h>
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 3a021b01161d..9c163146071d 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -41,7 +41,6 @@
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
 #include <mach/mx3_camera.h>
-#include <mach/spi.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 3f81e357affb..20861d797841 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -13,7 +13,6 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
-#include <mach/spi.h>
 
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 036ba1a4704b..9caf38be3928 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -40,7 +40,6 @@
 #include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
-#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
index d7d190eacdcd..dab34c508256 100644
--- a/arch/arm/mach-mx3/mach-vpr200.c
+++ b/arch/arm/mach-mx3/mach-vpr200.c
@@ -38,7 +38,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/mfd/mc13xxx.h>
-#include <linux/gpio_keys.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 57f7b00cb709..f3aa0ce497b2 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -26,7 +26,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ulpi.h>
 
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index d0296a94c475..4efa02ee1639 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -23,13 +23,11 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/fsl_devices.h>
 
 #include <mach/eukrea-baseboards.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 29b180823bf5..5ef25a596143 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -23,7 +23,6 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/fsl_devices.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/can/platform/mcp251x.h>
@@ -32,7 +31,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index dedf7f2d6d0f..11210e1ae42a 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -23,7 +23,6 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index ab50aa9d268c..cba59f16b205 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -16,9 +16,6 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
-#include <linux/fec.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
@@ -26,7 +23,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index acab1911cb3c..c7c94596887e 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -22,7 +22,6 @@
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/mc13892.h>
@@ -32,8 +31,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index db04ce8462dc..57b4d6bc6bf8 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -22,7 +22,6 @@
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/mc13892.h>
@@ -35,8 +34,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 2af3f43f74db..f87d571882c6 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -21,7 +21,6 @@
 
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/fec.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/spi/flash.h>
@@ -31,7 +30,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
 #define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 10a1bea10548..4487779d29c8 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -20,13 +20,11 @@
 
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/fec.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 31e173267edf..f3da62ac9f13 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -20,13 +20,11 @@
 
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/fec.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index 4a8550529b04..97292d20f1f3 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -18,13 +18,11 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/fsl_devices.h>
 #include <linux/i2c/tsc2007.h>
 #include <linux/leds.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index 0c80b62ed786..31c871ec46a6 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -37,7 +37,6 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
 #include <mach/audmux.h>
 
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index d0c7075937cf..56739c23aca7 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -20,7 +20,6 @@
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/mc13892.h>
@@ -30,8 +29,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
-#include <mach/mxc_ehci.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-- 
cgit v1.2.3


From 0eae7aaacfbf2cbbaccaebd81edaf8596f97ea91 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Thu, 10 Mar 2011 20:55:04 +0100
Subject: ARM: mx27: fix gpt4/5 base address
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Reported-by: Igor Trevisan <igt1972@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
LAKML-Reference: 1299786904-5494-1-git-send-email-w.sang@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx27.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index cbc43ad5ef48..1dc1c522601b 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -60,8 +60,8 @@
 #define MX27_AUDMUX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x16000)
 #define MX27_CSPI3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x17000)
 #define MX27_MSHC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x18000)
-#define MX27_GPT5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x19000)
-#define MX27_GPT4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1a000)
+#define MX27_GPT4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x19000)
+#define MX27_GPT5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1a000)
 #define MX27_UART5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1b000)
 #define MX27_UART6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1c000)
 #define MX27_I2C2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1d000)
-- 
cgit v1.2.3


From 837703f761c148371c363f31c4cb707e58d3a3bf Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Tue, 29 Mar 2011 16:45:09 -0300
Subject: ARM: mxs/mach-mx2[38]evk: Set the initial value on gpio_request_one
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Current code does not set the GPIO value to zero as mentioned in the comment.

Fix it by setting the initial GPIO value to zero.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
LAKML-Reference: 1301427910-31726-1-git-send-email-fabio.estevam@freescale.com
[ukleinek: squashed two patches together fixing both boards at once]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxs/mach-mx23evk.c | 2 +-
 arch/arm/mach-mxs/mach-mx28evk.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index 214e5b641bbc..3c2de33803ab 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -148,7 +148,7 @@ static void __init mx23evk_init(void)
 	mx23_add_auart0();
 
 	/* power on mmc slot by writing 0 to the gpio */
-	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc0-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index bb329b9a2608..eacdc6b0e70a 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -375,13 +375,13 @@ static void __init mx28evk_init(void)
 	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
 
 	/* power on mmc slot by writing 0 to the gpio */
-	ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+	ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc0-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
 	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
 
-	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT,
+	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc1-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
-- 
cgit v1.2.3


From c974acd56525e705ba44d903f553e1e3839c51b1 Mon Sep 17 00:00:00 2001
From: Richard Zhao <richard.zhao@linaro.org>
Date: Thu, 31 Mar 2011 18:16:23 +0800
Subject: ARM: imx: clean up the section marks of extern data
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
LAKML-Reference: 1301566583-18947-1-git-send-email-richard.zhao@freescale.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/devices-imx1.h  |  8 ++++----
 arch/arm/mach-imx/devices-imx21.h | 22 +++++++++++-----------
 arch/arm/mach-imx/devices-imx25.h | 35 +++++++++++++++++------------------
 arch/arm/mach-imx/devices-imx27.h | 30 +++++++++++++++---------------
 arch/arm/mach-mx3/devices-imx31.h | 24 ++++++++++++------------
 arch/arm/mach-mx3/devices-imx35.h | 29 ++++++++++++++---------------
 arch/arm/mach-mx5/devices-imx50.h |  6 +++---
 arch/arm/mach-mx5/devices-imx51.h | 23 +++++++++++------------
 arch/arm/mach-mx5/devices-imx53.h | 13 ++++++-------
 9 files changed, 93 insertions(+), 97 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
index da593657ff3f..3aad1e70de96 100644
--- a/arch/arm/mach-imx/devices-imx1.h
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -9,21 +9,21 @@
 #include <mach/mx1.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_imx_fb_data imx1_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx1_imx_fb_data;
 #define imx1_add_imx_fb(pdata) \
     imx_add_imx_fb(&imx1_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst;
+extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
 #define imx1_add_imx_i2c(pdata)		\
 	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
 
-extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
 #define imx1_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
 #define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
 #define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
 
-extern const struct imx_spi_imx_data imx1_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx1_cspi_data[];
 #define imx1_add_cspi(id, pdata)   \
 	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
 
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index 16744d2d9b81..2628e0c474dc 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -9,31 +9,31 @@
 #include <mach/mx21.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst;
+extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
 #define imx21_add_imx21_hcd(pdata)	\
 	imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
 
-extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
 #define imx21_add_imx2_wdt(pdata)	\
 	imx_add_imx2_wdt(&imx21_imx2_wdt_data)
 
-extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx21_imx_fb_data;
 #define imx21_add_imx_fb(pdata)	\
 	imx_add_imx_fb(&imx21_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
+extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
 #define imx21_add_imx_i2c(pdata)	\
 	imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
 
-extern const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
 #define imx21_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
 #define imx21_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
 #define imx21_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
 #define imx21_add_imx_uart0(pdata)	imx21_add_imx_uart(0, pdata)
@@ -41,19 +41,19 @@ extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
 #define imx21_add_imx_uart2(pdata)	imx21_add_imx_uart(2, pdata)
 #define imx21_add_imx_uart3(pdata)	imx21_add_imx_uart(3, pdata)
 
-extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
 #define imx21_add_mxc_mmc(id, pdata)	\
 	imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
 #define imx21_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
 #define imx21_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx21_mxc_w1_data)
 
-extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx21_cspi_data[];
 #define imx21_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx21_cspi_data[id], pdata)
 #define imx21_add_spi_imx0(pdata)	imx21_add_cspi(0, pdata)
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index b591d72f6037..efa0761c508d 100644
--- a/arch/arm/mach-imx/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -9,48 +9,48 @@
 #include <mach/mx25.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx25_fec_data __initconst;
+extern const struct imx_fec_data imx25_fec_data;
 #define imx25_add_fec(pdata)	\
 	imx_add_fec(&imx25_fec_data, pdata)
 
-extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst;
+extern const struct imx_flexcan_data imx25_flexcan_data[];
 #define imx25_add_flexcan(id, pdata)	\
 	imx_add_flexcan(&imx25_flexcan_data[id], pdata)
 #define imx25_add_flexcan0(pdata)	imx25_add_flexcan(0, pdata)
 #define imx25_add_flexcan1(pdata)	imx25_add_flexcan(1, pdata)
 
-extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
 #define imx25_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
 
-extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst;
+extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
 #define imx25_add_imxdi_rtc(pdata)	\
 	imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
 
-extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
 #define imx25_add_imx2_wdt(pdata)	\
 	imx_add_imx2_wdt(&imx25_imx2_wdt_data)
 
-extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx25_imx_fb_data;
 #define imx25_add_imx_fb(pdata)	\
 	imx_add_imx_fb(&imx25_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
 #define imx25_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
 #define imx25_add_imx_i2c0(pdata)	imx25_add_imx_i2c(0, pdata)
 #define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
 #define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
 
-extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
 #define imx25_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
 #define imx25_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
 #define imx25_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
 #define imx25_add_imx_uart0(pdata)	imx25_add_imx_uart(0, pdata)
@@ -59,33 +59,32 @@ extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
 #define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
 #define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
 
-extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst;
+extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
 #define imx25_add_mx2_camera(pdata)	\
 	imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
 
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
 #define imx25_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst;
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
 #define imx25_add_mxc_ehci_hs(pdata)	\
 	imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
 
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
 #define imx25_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx25_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
 #define imx25_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx25_cspi_data[];
 #define imx25_add_spi_imx(id, pdata)	\
 	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
 
-extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst;
+extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[];
 #define imx25_add_mxc_pwm(id)	\
 	imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index f1272d4b5a33..7f97a3cdd41d 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -9,35 +9,35 @@
 #include <mach/mx27.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx27_fec_data __initconst;
+extern const struct imx_fec_data imx27_fec_data;
 #define imx27_add_fec(pdata)	\
 	imx_add_fec(&imx27_fec_data, pdata)
 
-extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
 #define imx27_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
 
-extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
 #define imx27_add_imx2_wdt(pdata)	\
 	imx_add_imx2_wdt(&imx27_imx2_wdt_data)
 
-extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx27_imx_fb_data;
 #define imx27_add_imx_fb(pdata)	\
 	imx_add_imx_fb(&imx27_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
 #define imx27_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
 
-extern const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
 #define imx27_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
 #define imx27_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
 #define imx27_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
 #define imx27_add_imx_uart0(pdata)	imx27_add_imx_uart(0, pdata)
@@ -47,30 +47,30 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
 #define imx27_add_imx_uart4(pdata)	imx27_add_imx_uart(4, pdata)
 #define imx27_add_imx_uart5(pdata)	imx27_add_imx_uart(5, pdata)
 
-extern const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst;
+extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
 #define imx27_add_mx2_camera(pdata)	\
 	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
 
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
 #define imx27_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst;
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
 #define imx27_add_mxc_ehci_hs(id, pdata)	\
 	imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
 
-extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
 #define imx27_add_mxc_mmc(id, pdata)	\
 	imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
 #define imx27_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
 #define imx27_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx27_mxc_w1_data)
 
-extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx27_cspi_data[];
 #define imx27_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
 #define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
index 40f4e848a671..cf621d273aa3 100644
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -9,30 +9,30 @@
 #include <mach/mx31.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
 #define imx31_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
 
-extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
 #define imx31_add_imx2_wdt(pdata)       \
 	imx_add_imx2_wdt(&imx31_imx2_wdt_data)
 
-extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
 #define imx31_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
 #define imx31_add_imx_i2c0(pdata)	imx31_add_imx_i2c(0, pdata)
 #define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
 #define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
 
-extern const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
 #define imx31_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
 #define imx31_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
 #define imx31_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
 #define imx31_add_imx_uart0(pdata)	imx31_add_imx_uart(0, pdata)
@@ -41,26 +41,26 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
 #define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
 #define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
 
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
 #define imx31_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst;
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
 #define imx31_add_mxc_ehci_hs(id, pdata)	\
 	imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
 
-extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
 #define imx31_add_mxc_mmc(id, pdata)	\
 	imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
 #define imx31_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
 #define imx31_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx31_mxc_w1_data)
 
-extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx31_cspi_data[];
 #define imx31_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
 #define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index d545d86cc202..35826656e599 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -9,67 +9,66 @@
 #include <mach/mx35.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx35_fec_data __initconst;
+extern const struct imx_fec_data imx35_fec_data;
 #define imx35_add_fec(pdata)	\
 	imx_add_fec(&imx35_fec_data, pdata)
 
-extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
 #define imx35_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
 
-extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst;
+extern const struct imx_flexcan_data imx35_flexcan_data[];
 #define imx35_add_flexcan(id, pdata)	\
 	imx_add_flexcan(&imx35_flexcan_data[id], pdata)
 #define imx35_add_flexcan0(pdata)	imx35_add_flexcan(0, pdata)
 #define imx35_add_flexcan1(pdata)	imx35_add_flexcan(1, pdata)
 
-extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
 #define imx35_add_imx2_wdt(pdata)       \
 	imx_add_imx2_wdt(&imx35_imx2_wdt_data)
 
-extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
 #define imx35_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
 #define imx35_add_imx_i2c0(pdata)	imx35_add_imx_i2c(0, pdata)
 #define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
 #define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
 
-extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
 #define imx35_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
 #define imx35_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
 #define imx35_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
 #define imx35_add_imx_uart0(pdata)	imx35_add_imx_uart(0, pdata)
 #define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
 #define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
 
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
 #define imx35_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst;
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
 #define imx35_add_mxc_ehci_hs(pdata)	\
 	imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
 
-extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
 #define imx35_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
 #define imx35_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx35_mxc_w1_data)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx35_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
 #define imx35_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx35_cspi_data[];
 #define imx35_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
 #define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-mx5/devices-imx50.h
index c9e42823c7e3..7216667eaafc 100644
--- a/arch/arm/mach-mx5/devices-imx50.h
+++ b/arch/arm/mach-mx5/devices-imx50.h
@@ -21,14 +21,14 @@
 #include <mach/mx50.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
 #define imx50_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
 
-extern const struct imx_fec_data imx50_fec_data __initconst;
+extern const struct imx_fec_data imx50_fec_data;
 #define imx50_add_fec(pdata)	\
 	imx_add_fec(&imx50_fec_data, pdata)
 
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
 #define imx50_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index 7fff485e5603..e3253c506d50 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -9,49 +9,48 @@
 #include <mach/mx51.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx51_fec_data __initconst;
+extern const struct imx_fec_data imx51_fec_data;
 #define imx51_add_fec(pdata)	\
 	imx_add_fec(&imx51_fec_data, pdata)
 
 #define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata)
 
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
 #define imx51_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
 
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
 #define imx51_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
 #define imx51_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
 #define imx51_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx51_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
 #define imx51_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx51_cspi_data __initconst;
+extern const struct imx_spi_imx_data imx51_cspi_data;
 #define imx51_add_cspi(pdata)	\
 	imx_add_spi_imx(&imx51_cspi_data, pdata)
 
-extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx51_ecspi_data[];
 #define imx51_add_ecspi(id, pdata)	\
 	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
 
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst;
+extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
 #define imx51_add_imx2_wdt(id, pdata)	\
 	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
 
-extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst;
+extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
 #define imx51_add_mxc_pwm(id)	\
 	imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
 
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
 #define imx51_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index 9251008dad1f..48f4c8cc42f5 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -8,28 +8,27 @@
 #include <mach/mx53.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx53_fec_data __initconst;
+extern const struct imx_fec_data imx53_fec_data;
 #define imx53_add_fec(pdata)   \
 	imx_add_fec(&imx53_fec_data, pdata)
 
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
 #define imx53_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
 
 
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
 #define imx53_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx53_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
 #define imx53_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx53_ecspi_data[];
 #define imx53_add_ecspi(id, pdata)	\
 	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
 
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst;
+extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
 #define imx53_add_imx2_wdt(id, pdata)	\
 	imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-- 
cgit v1.2.3


From bfb70b2ce87b65ce82c3fb467d1146f43f6d73af Mon Sep 17 00:00:00 2001
From: Baruch Siach <baruch@tkos.co.il>
Date: Mon, 14 Mar 2011 11:40:21 +0200
Subject: ARM: imx/mx25: add NAND chip select pins to iomux
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
LAKML-Reference: cae1d71db47204ee2654eca7391cb656ed53566b.1300095569.git.baruch@tkos.co.il
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx25.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index d7f52c91f82e..2e5244de7ff5 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -89,13 +89,16 @@
 #define MX25_PAD_CS0__GPIO_4_2		IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CS1__CS1		IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS1__NF_CE3		IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS1__GPIO_4_3		IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CS4__CS4		IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__NF_CE1		IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS4__UART5_CTS		IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS4__GPIO_3_20		IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CS5__CS5		IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__NF_CE2		IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
 
-- 
cgit v1.2.3


From 9d32d7dbcfefff84b4bd47bd8174eff03a063a30 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Mon, 4 Apr 2011 09:50:49 -0300
Subject: ARM: mx5/mx53_smd: Add esdhc support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
LAKML-Reference: 1301921449-32194-1-git-send-email-fabio.estevam@freescale.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/Kconfig          |  1 +
 arch/arm/mach-mx5/board-mx53_smd.c | 28 ++++++++++++++++++++++++++++
 2 files changed, 29 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 159340da9191..49b5661f01c2 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -154,6 +154,7 @@ config MACH_MX53_SMD
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  Include support for MX53 SMD platform. This includes specific
 	  configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index f3da62ac9f13..817c08938f55 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -50,6 +50,31 @@ static iomux_v3_cfg_t mx53_smd_pads[] = {
 	/* I2C1 */
 	MX53_PAD_CSI0_DAT8__I2C1_SDA,
 	MX53_PAD_CSI0_DAT9__I2C1_SCL,
+	/* SD1 */
+	MX53_PAD_SD1_CMD__ESDHC1_CMD,
+	MX53_PAD_SD1_CLK__ESDHC1_CLK,
+	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* SD2 */
+	MX53_PAD_SD2_CMD__ESDHC2_CMD,
+	MX53_PAD_SD2_CLK__ESDHC2_CLK,
+	MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
+	MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
+	MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
+	MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
+	/* SD3 */
+	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
+	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
+	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
+	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
+	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
+	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
+	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
+	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
+	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
+	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
 };
 
 static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
@@ -95,6 +120,9 @@ static void __init mx53_smd_board_init(void)
 	imx53_add_fec(&mx53_smd_fec_data);
 	imx53_add_imx2_wdt(0, NULL);
 	imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
+	imx53_add_sdhci_esdhc_imx(0, NULL);
+	imx53_add_sdhci_esdhc_imx(1, NULL);
+	imx53_add_sdhci_esdhc_imx(2, NULL);
 }
 
 static void __init mx53_smd_timer_init(void)
-- 
cgit v1.2.3


From 24ac7a5504001d9404e5a8554944422d9d55b2ef Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Sun, 3 Apr 2011 22:47:23 -0300
Subject: ARM: mx5/mx53_loco: Fix build warning related to gpio_keys_button
 structure
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix the following warning:

CC      arch/arm/mach-mx5/board-mx53_loco.o
arch/arm/mach-mx5/board-mx53_loco.c:203: warning: initialization discards qualifiers from pointer target type

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
LAKML-Reference: 1301881643-26040-1-git-send-email-festevam@gmail.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/board-mx53_loco.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 4487779d29c8..1b947e8c9c0c 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -191,7 +191,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	.wakeup		= wake,					\
 }
 
-static const struct gpio_keys_button loco_buttons[] __initconst = {
+static struct gpio_keys_button loco_buttons[] = {
 	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
 	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
 	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-- 
cgit v1.2.3


From daa1f8c166f6181a4e61c48caf08850bd6632f26 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Tue, 1 Mar 2011 11:04:34 +0100
Subject: ARM: mx3: dynamically allocate "mxc_rtc" devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

LAKML-Reference: 1299271882-2130-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/Kconfig                       |  1 +
 arch/arm/mach-mx3/devices-imx31.h               |  4 +++
 arch/arm/mach-mx3/devices.c                     | 19 ------------
 arch/arm/mach-mx3/devices.h                     |  1 -
 arch/arm/mach-mx3/mx31lite-db.c                 |  2 +-
 arch/arm/plat-mxc/devices/Kconfig               |  3 ++
 arch/arm/plat-mxc/devices/Makefile              |  1 +
 arch/arm/plat-mxc/devices/platform-mxc_rtc.c    | 40 +++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/devices-common.h |  9 ++++++
 9 files changed, 59 insertions(+), 21 deletions(-)
 create mode 100644 arch/arm/plat-mxc/devices/platform-mxc_rtc.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index b0831efadefc..ae23211dbadc 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -84,6 +84,7 @@ config MACH_MX31LITE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
index cf621d273aa3..3059b3e33dec 100644
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -56,6 +56,10 @@ extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
 #define imx31_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
+#define imx31_add_mxc_rtc(pdata)	\
+	imx_add_mxc_rtc(&imx31_mxc_rtc_data)
+
 extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
 #define imx31_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx31_mxc_w1_data)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index b6672db788fb..0701ee45c548 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -94,22 +94,3 @@ struct platform_device mx3_camera = {
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
-
-static struct resource imx_rtc_resources[] = {
-	{
-		.start  = MX31_RTC_BASE_ADDR,
-		.end    = MX31_RTC_BASE_ADDR + 0x3fff,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.start  = MX31_INT_RTC,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_rtc_device0 = {
-	.name           = "mxc_rtc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
-	.resource       = imx_rtc_resources,
-};
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 121962c568d1..d23f85375655 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,4 +1,3 @@
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mx3_camera;
-extern struct platform_device imx_rtc_device0;
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 3124ea837ac7..04fab659947c 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -200,5 +200,5 @@ void __init mx31lite_db_init(void)
 	imx31_add_spi_imx0(&spi0_pdata);
 	platform_device_register(&litekit_led_device);
 	imx31_add_imx2_wdt(NULL);
-	mxc_register_device(&imx_rtc_device0, NULL);
+	imx31_add_mxc_rtc(NULL);
 }
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index b9ab1d58b5e7..0e8d7ab7898a 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -63,6 +63,9 @@ config IMX_HAVE_PLATFORM_MXC_RNGA
 	bool
 	select ARCH_HAS_RNGA
 
+config IMX_HAVE_PLATFORM_MXC_RTC
+	bool
+
 config IMX_HAVE_PLATFORM_MXC_W1
 	bool
 
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 75cd2ece9053..ca227eaea7cc 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
new file mode 100644
index 000000000000..16d0ec4df5f6
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2010-2011 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_rtc_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _RTC_BASE_ADDR,			\
+		.irq = soc ## _INT_RTC,					\
+	}
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
+	imx_mxc_rtc_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+struct platform_device *__init imx_add_mxc_rtc(
+		const struct imx_mxc_rtc_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("mxc_rtc", -1,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 8658c9caa650..b0bc1987c1d3 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -237,6 +237,15 @@ struct imx_mxc_pwm_data {
 struct platform_device *__init imx_add_mxc_pwm(
 		const struct imx_mxc_pwm_data *data);
 
+/* mxc_rtc */
+struct imx_mxc_rtc_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_rtc(
+		const struct imx_mxc_rtc_data *data);
+
+/* mxc_w1 */
 struct imx_mxc_w1_data {
 	resource_size_t iobase;
 };
-- 
cgit v1.2.3


From 90026c8c823bff54172eab33a5e7fcecfd3df635 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Thu, 3 Mar 2011 11:39:42 +0100
Subject: ARM: mx3/pcm037: properly allocate memory for mx3-camera
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

There is no need to memzero the buffer because dma_alloc_coherent zeros
the memory for us.

This fixes:

	BUG: Your driver calls ioremap() on system memory.  This leads
	<4>to architecturally unpredictable behaviour on ARMv6+, and ioremap()
	<4>will fail in the next kernel release.  Please fix your driver.

Tested-by: Michael Grzeschik <mgr@pengutronix.de>
LAKML-Reference: 1299271882-2130-3-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mach-pcm037.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index f07d3bded674..497b39b0f0e4 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -31,6 +31,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/gfp.h>
+#include <linux/memblock.h>
 
 #include <media/soc_camera.h>
 
@@ -410,25 +411,16 @@ struct mx3_camera_pdata camera_pdata = {
 	.mclk_10khz	= 2000,
 };
 
-static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
+
+static int __init pcm037_camera_alloc_dma(void)
 {
-	dma_addr_t dma_handle;
-	void *buf;
 	int dma;
 
-	if (buf_size < 2 * 1024 * 1024)
-		return -EINVAL;
-
-	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
-	if (!buf) {
-		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	memset(buf, 0, buf_size);
-
 	dma = dma_declare_coherent_memory(&mx3_camera.dev,
-					dma_handle, dma_handle, buf_size,
+					mx3_camera_base, mx3_camera_base,
+					MX3_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
 
 	/* The way we call dma_declare_coherent_memory only a malloc can fail */
@@ -649,7 +641,7 @@ static void __init pcm037_init(void)
 	else
 		iclink_mt9t031.power = NULL;
 
-	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+	if (!pcm037_camera_alloc_dma())
 		mxc_register_device(&mx3_camera, &camera_pdata);
 
 	platform_device_register(&pcm970_sja1000);
@@ -680,9 +672,19 @@ struct sys_timer pcm037_timer = {
 	.init	= pcm037_timer_init,
 };
 
+static void __init pcm037_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
 	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.reserve = pcm037_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-- 
cgit v1.2.3


From fc7f95cdc4f27e7fdb6958cbf2dfb04f6cd5cfac Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Thu, 3 Mar 2011 14:21:53 +0100
Subject: ARM: mx3/mx31moboard: properly allocate memory for mx3-camera
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

It's not allowed to create an alias of system RAM for DMA.  So the memory
used must not be allocated using dma_alloc_coherent but has to be reserved
before using memblock routines.

There is no need to memzero the buffer because dma_alloc_coherent zeros
the memory for us.

LAKML-Reference: 1299271882-2130-4-git-send-email-u.kleine-koenig@pengutronix.de
Tested-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
Acked-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mach-mx31moboard.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 9c163146071d..6c13061b6ac2 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -27,6 +27,7 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
 #include <linux/types.h>
+#include <linux/memblock.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -472,27 +473,17 @@ static struct mx3_camera_pdata camera_pdata = {
 	.mclk_10khz	= 4800,
 };
 
-#define CAMERA_BUF_SIZE	(4*1024*1024)
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
 
-static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+static int __init mx31moboard_cam_alloc_dma(void)
 {
-	dma_addr_t dma_handle;
-	void *buf;
 	int dma;
 
-	if (buf_size < 2 * 1024 * 1024)
-		return -EINVAL;
-
-	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
-	if (!buf) {
-		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	memset(buf, 0, buf_size);
 
 	dma = dma_declare_coherent_memory(&mx3_camera.dev,
-					dma_handle, dma_handle, buf_size,
+					mx3_camera_base, mx3_camera_base,
+					MX3_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
 
 	/* The way we call dma_declare_coherent_memory only a malloc can fail */
@@ -529,7 +520,7 @@ static void __init mx31moboard_init(void)
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
+	if (!mx31moboard_cam_alloc_dma())
 		mxc_register_device(&mx3_camera, &camera_pdata);
 
 	usb_xcvr_reset();
@@ -564,9 +555,19 @@ struct sys_timer mx31moboard_timer = {
 	.init	= mx31moboard_timer_init,
 };
 
+static void __init mx31moboard_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
 	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.reserve = mx31moboard_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
-- 
cgit v1.2.3


From e7a8f9b717308c0cfec65679212c6204ababd544 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Thu, 3 Mar 2011 21:32:02 +0100
Subject: ARM: mx3: dynamically allocate "ipu-core" devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

... together with the related devices "mx3_camera" and "mx3_sdc_fb".

"mx3_camera" doesn't fit the scheme of the other devices that just are
allocated and registered in a single function because it needs additional
care to get some dmaable memory. So currently imx31_alloc_mx3_camera
duplicates most of imx_add_platform_device_dmamask, but I'm not sure it's
worth to split the latter to be able to reuse more code.

This gets rid of mach-mx3/devices.[ch] and so several files need to be
adapted not to #include devices.h anymore.

LAKML-Reference: 1299271882-2130-5-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/Kconfig                       |   8 ++
 arch/arm/mach-mx3/Makefile                      |   2 +-
 arch/arm/mach-mx3/devices-imx31.h               |   8 ++
 arch/arm/mach-mx3/devices-imx35.h               |   8 ++
 arch/arm/mach-mx3/devices.c                     |  96 ------------------
 arch/arm/mach-mx3/devices.h                     |   3 -
 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c    |  12 +--
 arch/arm/mach-mx3/mach-armadillo5x0.c           |  12 +--
 arch/arm/mach-mx3/mach-cpuimx35.c               |   1 -
 arch/arm/mach-mx3/mach-kzm_arm11_01.c           |   1 -
 arch/arm/mach-mx3/mach-mx31_3ds.c               |  49 ++++-----
 arch/arm/mach-mx3/mach-mx31ads.c                |   1 -
 arch/arm/mach-mx3/mach-mx31lilly.c              |   1 -
 arch/arm/mach-mx3/mach-mx31lite.c               |   1 -
 arch/arm/mach-mx3/mach-mx31moboard.c            |  39 ++++---
 arch/arm/mach-mx3/mach-mx35_3ds.c               |   1 -
 arch/arm/mach-mx3/mach-pcm037.c                 |  37 +++----
 arch/arm/mach-mx3/mach-pcm037_eet.c             |   1 -
 arch/arm/mach-mx3/mach-pcm043.c                 |  12 +--
 arch/arm/mach-mx3/mach-qong.c                   |   1 -
 arch/arm/mach-mx3/mach-vpr200.c                 |  12 +--
 arch/arm/mach-mx3/mx31lilly-db.c                |  10 +-
 arch/arm/mach-mx3/mx31lite-db.c                 |   1 -
 arch/arm/mach-mx3/mx31moboard-devboard.c        |   1 -
 arch/arm/mach-mx3/mx31moboard-marxbot.c         |   1 -
 arch/arm/mach-mx3/mx31moboard-smartbot.c        |   1 -
 arch/arm/plat-mxc/devices/Kconfig               |   3 +
 arch/arm/plat-mxc/devices/Makefile              |   1 +
 arch/arm/plat-mxc/devices/platform-ipu-core.c   | 129 ++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/devices-common.h |  18 ++++
 30 files changed, 263 insertions(+), 208 deletions(-)
 delete mode 100644 arch/arm/mach-mx3/devices.c
 delete mode 100644 arch/arm/mach-mx3/devices.h
 create mode 100644 arch/arm/plat-mxc/devices/platform-ipu-core.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index ae23211dbadc..cb7d4a3a092a 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -56,6 +56,7 @@ config MACH_PCM037
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
@@ -99,6 +100,7 @@ config MACH_MX31_3DS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
@@ -122,6 +124,7 @@ config MACH_MX31MOBOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
@@ -134,6 +137,7 @@ config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
@@ -159,6 +163,7 @@ config MACH_PCM043
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
@@ -173,6 +178,7 @@ config MACH_ARMADILLO5X0
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
@@ -238,6 +244,7 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD
 	bool "Eukrea MBIMXSD development board"
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMXSD evaluation board.
@@ -252,6 +259,7 @@ config MACH_VPR200
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index a54faf2cf5fa..15a7ff826ce7 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y				:= mm.o devices.o cpu.o
+obj-y				:= mm.o cpu.o
 obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o ehci-imx31.o
 obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o ehci-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
index 3059b3e33dec..dbe940d9c53a 100644
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -41,6 +41,14 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
 #define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
 #define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
 
+extern const struct imx_ipu_core_data imx31_ipu_core_data;
+#define imx31_add_ipu_core(pdata)	\
+	imx_add_ipu_core(&imx31_ipu_core_data, pdata)
+#define imx31_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
+#define imx31_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
+
 extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
 #define imx31_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index 35826656e599..234cbd3c18af 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -49,6 +49,14 @@ extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
 #define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
 #define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
 
+extern const struct imx_ipu_core_data imx35_ipu_core_data;
+#define imx35_add_ipu_core(pdata)	\
+	imx_add_ipu_core(&imx35_ipu_core_data, pdata)
+#define imx35_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
+#define imx35_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
+
 extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
 #define imx35_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
deleted file mode 100644
index 0701ee45c548..000000000000
--- a/arch/arm/mach-mx3/devices.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/common.h>
-#include <mach/mx3_camera.h>
-
-#include "devices.h"
-
-/* i.MX31 Image Processing Unit */
-
-/* The resource order is important! */
-static struct resource mx3_ipu_rsrc[] = {
-	{
-		.start = MX3x_IPU_CTRL_BASE_ADDR,
-		.end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX3x_IPU_CTRL_BASE_ADDR + 0x88,
-		.end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX3x_INT_IPU_SYN,
-		.end = MX3x_INT_IPU_SYN,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MX3x_INT_IPU_ERR,
-		.end = MX3x_INT_IPU_ERR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx3_ipu = {
-	.name = "ipu-core",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(mx3_ipu_rsrc),
-	.resource = mx3_ipu_rsrc,
-};
-
-static struct resource fb_resources[] = {
-	{
-		.start	= MX3x_IPU_CTRL_BASE_ADDR + 0xB4,
-		.end	= MX3x_IPU_CTRL_BASE_ADDR + 0x1BF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mx3_fb = {
-	.name		= "mx3_sdc_fb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fb_resources),
-	.resource	= fb_resources,
-	.dev		= {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-       },
-};
-
-static struct resource camera_resources[] = {
-	{
-		.start	= MX3x_IPU_CTRL_BASE_ADDR + 0x60,
-		.end	= MX3x_IPU_CTRL_BASE_ADDR + 0x87,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mx3_camera = {
-	.name		= "mx3-camera",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(camera_resources),
-	.resource	= camera_resources,
-	.dev		= {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
deleted file mode 100644
index d23f85375655..000000000000
--- a/arch/arm/mach-mx3/devices.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern struct platform_device mx3_ipu;
-extern struct platform_device mx3_fb;
-extern struct platform_device mx3_camera;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index f61b2a923826..4909ea05855a 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -38,12 +38,9 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 #include <mach/audmux.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
 	{
@@ -98,12 +95,11 @@ static const struct fb_videomode fb_modedb[] = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "CMO-QVGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -280,8 +276,8 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 #endif
 
 	imx35_add_imx_uart1(&uart_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index ace0c4c3b662..8e614b10dd5c 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -48,12 +48,9 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 #include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
@@ -374,12 +371,11 @@ static const struct fb_videomode fb_modedb[] = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "CRT-VGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -512,8 +508,8 @@ static void __init armadillo5x0_init(void)
 	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
 	/* Register FB */
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* Register NOR Flash */
 	mxc_register_device(&armadillo5x0_nor_flash,
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index ae13fd73a810..3f8ef825fa6f 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -43,7 +43,6 @@
 #include <mach/iomux-mx35.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index d35621d62b4d..1ecae20cf4e3 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -39,7 +39,6 @@
 #include <mach/iomux-mx3.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 #define KZM_ARM11_IO_ADDRESS(x) (IOMEM(					\
 	IMX_IO_P2V_MODULE(x, MX31_CS4) ?:				\
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 477b2d274396..9b982449cb52 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -39,12 +39,8 @@
 #include <mach/iomux-mx3.h>
 #include <mach/3ds_debugboard.h>
 #include <mach/ulpi.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
@@ -177,22 +173,37 @@ static struct gpio mx31_3ds_camera_gpios[] = {
 	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
 };
 
-static int __init mx31_3ds_camera_alloc_dma(void)
+static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
+	.flags = MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz = 2600,
+};
+
+static int __init mx31_3ds_init_camera(void)
 {
-	int dma;
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev =
+		imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
+
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
 
 	if (!mx3_camera_base)
-		return -ENOMEM;
+		goto err;
 
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+	dma = dma_declare_coherent_memory(&pdev->dev,
 					mx3_camera_base, mx3_camera_base,
 					MX31_3DS_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
 
 	if (!(dma & DMA_MEMORY_MAP))
-		return -ENOMEM;
+		goto err;
 
-	return 0;
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
+
+	return ret;
 }
 
 static int mx31_3ds_camera_power(struct device *dev, int on)
@@ -240,12 +251,6 @@ static struct platform_device mx31_3ds_ov2640 = {
 	},
 };
 
-struct mx3_camera_pdata mx31_3ds_camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
-	.flags		= MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 2600,
-};
-
 /*
  * FB support
  */
@@ -272,8 +277,7 @@ static struct ipu_platform_data mx3_ipu_data = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "Epson-VGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -722,8 +726,8 @@ static void __init mx31_3ds_init(void)
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
 	imx31_add_spi_imx0(&spi0_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -734,10 +738,7 @@ static void __init mx31_3ds_init(void)
 		iclink_ov2640.power = NULL;
 	}
 
-	if (!mx31_3ds_camera_alloc_dma())
-		mxc_register_device(&mx3_camera, &mx31_3ds_camera_pdata);
-	else
-		pr_err("Failed to allocate dma memory for camera");
+	mx31_3ds_init_camera();
 }
 
 static void __init mx31_3ds_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 3d095d69bc68..f4dee0254634 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -38,7 +38,6 @@
 #endif
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /* PBC Board interrupt status register */
 #define PBC_INTSTATUS           0x000016
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index ed95745163b8..410e676ae087 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -46,7 +46,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains module-specific initialization routines for LILLY-1131.
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 24a21a384bf1..ac9b4cad320e 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -44,7 +44,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains the module-specific initialization routines.
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 6c13061b6ac2..eaaea2dbd4fd 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -40,12 +40,9 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 static unsigned int moboard_pins[] = {
 	/* UART0 */
@@ -194,8 +191,8 @@ static struct regulator_init_data sdhc_vreg_data = {
 
 static struct regulator_consumer_supply cam_consumers[] = {
 	{
-		.dev	= &mx3_camera.dev,
-		.supply	= "cam_vcc",
+		.dev_name = "mx3_camera.0",
+		.supply = "cam_vcc",
 	},
 };
 
@@ -458,7 +455,7 @@ static struct platform_device mx31moboard_leds_device = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
@@ -467,8 +464,7 @@ static struct platform_device *devices[] __initdata = {
 	&mx31moboard_leds_device,
 };
 
-static struct mx3_camera_pdata camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3_camera_pdata camera_pdata __initdata = {
 	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
 	.mclk_10khz	= 4800,
 };
@@ -476,18 +472,31 @@ static struct mx3_camera_pdata camera_pdata = {
 static phys_addr_t mx3_camera_base __initdata;
 #define MX3_CAMERA_BUF_SIZE SZ_4M
 
-static int __init mx31moboard_cam_alloc_dma(void)
+static int __init mx31moboard_init_cam(void)
 {
-	int dma;
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev;
+
+	imx31_add_ipu_core(&mx3_ipu_data);
 
+	pdev = imx31_alloc_mx3_camera(&camera_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
 
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+	dma = dma_declare_coherent_memory(&pdev->dev,
 					mx3_camera_base, mx3_camera_base,
 					MX3_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
+
+	return ret;
 
-	/* The way we call dma_declare_coherent_memory only a malloc can fail */
-	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
 }
 
 static int mx31moboard_baseboard;
@@ -519,9 +528,7 @@ static void __init mx31moboard_init(void)
 
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	if (!mx31moboard_cam_alloc_dma())
-		mxc_register_device(&mx3_camera, &camera_pdata);
+	mx31moboard_init_cam();
 
 	usb_xcvr_reset();
 
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index ff5fe231b8d6..882880ac1bbc 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -42,7 +42,6 @@
 #include <mach/3ds_debugboard.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 #define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
 
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 497b39b0f0e4..89c213b81295 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -42,13 +42,9 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
-#include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 #include "pcm037.h"
 
 static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
@@ -405,8 +401,7 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.exit = pcm970_sdhc1_exit,
 };
 
-struct mx3_camera_pdata camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+struct mx3_camera_pdata camera_pdata __initdata = {
 	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
 	.mclk_10khz	= 2000,
 };
@@ -414,17 +409,27 @@ struct mx3_camera_pdata camera_pdata = {
 static phys_addr_t mx3_camera_base __initdata;
 #define MX3_CAMERA_BUF_SIZE SZ_4M
 
-static int __init pcm037_camera_alloc_dma(void)
+static int __init pcm037_init_camera(void)
 {
-	int dma;
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata);
 
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	dma = dma_declare_coherent_memory(&pdev->dev,
 					mx3_camera_base, mx3_camera_base,
 					MX3_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
 
-	/* The way we call dma_declare_coherent_memory only a malloc can fail */
-	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+	return ret;
 }
 
 static struct platform_device *devices[] __initdata = {
@@ -434,7 +439,7 @@ static struct platform_device *devices[] __initdata = {
 	&pcm037_mt9v022,
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
@@ -492,7 +497,6 @@ static const struct fb_videomode fb_modedb[] = {
 };
 
 static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
 	.name		= "Sharp-LQ035Q7DH06-QVGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -630,8 +634,8 @@ static void __init pcm037_init(void)
 
 	imx31_add_mxc_nand(&pcm037_nand_board_info);
 	imx31_add_mxc_mmc(0, &sdhc_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -641,8 +645,7 @@ static void __init pcm037_init(void)
 	else
 		iclink_mt9t031.power = NULL;
 
-	if (!pcm037_camera_alloc_dma())
-		mxc_register_device(&mx3_camera, &camera_pdata);
+	pcm037_init_camera();
 
 	platform_device_register(&pcm970_sja1000);
 
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 20861d797841..1b7606bef8f4 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -17,7 +17,6 @@
 #include <asm/mach-types.h>
 
 #include "pcm037.h"
-#include "devices.h"
 #include "devices-imx31.h"
 
 static unsigned int pcm037_eet_pins[] = {
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 9caf38be3928..10154cb15567 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -36,13 +36,10 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
 	{
@@ -80,12 +77,11 @@ static const struct fb_videomode fb_modedb[] = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "Sharp-LQ035Q7",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -389,8 +385,8 @@ static void __init pcm043_init(void)
 
 	imx35_add_imx_i2c0(&pcm043_i2c0_data);
 
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	if (otg_mode_host) {
 		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index 17f758b77623..a6052872ffb8 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -33,7 +33,6 @@
 #include <mach/iomux-mx3.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /* FPGA defines */
 #define QONG_FPGA_VERSION(major, minor, rev)	\
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
index dab34c508256..d74e3473d236 100644
--- a/arch/arm/mach-mx3/mach-vpr200.c
+++ b/arch/arm/mach-mx3/mach-vpr200.c
@@ -32,15 +32,12 @@
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
 #include <mach/irqs.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/mfd/mc13xxx.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 #define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
 #define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)
@@ -90,12 +87,11 @@ static const struct fb_videomode fb_modedb[] = {
 	}
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "PT0708048",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -292,8 +288,8 @@ static void __init vpr200_board_init(void)
 	imx35_add_imx_uart0(NULL);
 	imx35_add_imx_uart2(NULL);
 
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	imx35_add_fsl_usb2_udc(&otg_device_pdata);
 	imx35_add_mxc_ehci_hs(&usb_host_pdata);
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 8f1a38ebf5c8..e70f4527c918 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -34,11 +34,8 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/mx3fb.h>
-#include <mach/ipu.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains board-specific initialization routines for the
@@ -164,7 +161,7 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = {
 };
 
 /* Framebuffer support */
-static struct ipu_platform_data ipu_data __initdata = {
+static const struct ipu_platform_data ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
@@ -187,7 +184,6 @@ static const struct fb_videomode fb_modedb = {
 };
 
 static struct mx3fb_platform_data fb_pdata __initdata = {
-	.dma_dev	= &mx3_ipu.dev,
 	.name		= "CRT-VGA",
 	.mode		= &fb_modedb,
 	.num_modes	= 1,
@@ -202,8 +198,8 @@ static void __init mx31lilly_init_fb(void)
 		return;
 	}
 
-	mxc_register_device(&mx3_ipu, &ipu_data);
-	mxc_register_device(&mx3_fb, &fb_pdata);
+	imx31_add_ipu_core(&ipu_data);
+	imx31_add_mx3_sdc_fb(&fb_pdata);
 	gpio_direction_output(LCD_VCC_EN_GPIO, 1);
 }
 
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 04fab659947c..5aa053edc17c 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -37,7 +37,6 @@
 #include <mach/board-mx31lite.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains board-specific initialization routines for the
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 6410b9c48a02..0aa25364360d 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -28,7 +28,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 static unsigned int devboard_pins[] = {
 	/* UART1 */
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index f3aa0ce497b2..bb639cbda4e5 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -32,7 +32,6 @@
 #include <media/soc_camera.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 static unsigned int marxbot_pins[] = {
 	/* SDHC2 */
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 35f806e737c1..fabb801e7994 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -32,7 +32,6 @@
 #include <media/soc_camera.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 static unsigned int smartbot_pins[] = {
 	/* UART1 */
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index 0e8d7ab7898a..a860b16d7258 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -41,6 +41,9 @@ config IMX_HAVE_PLATFORM_IMX_UART
 config IMX_HAVE_PLATFORM_IMX_UDC
 	bool
 
+config IMX_HAVE_PLATFORM_IPU_CORE
+	bool
+
 config IMX_HAVE_PLATFORM_MX1_CAMERA
 	bool
 
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index ca227eaea7cc..ad2922acf480 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c
new file mode 100644
index 000000000000..edf65034aea5
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2011 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_ipu_core_entry_single(soc)					\
+{									\
+	.iobase = soc ## _IPU_CTRL_BASE_ADDR,				\
+	.synirq = soc ## _INT_IPU_SYN,					\
+	.errirq = soc ## _INT_IPU_ERR,					\
+}
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_ipu_core_data imx31_ipu_core_data __initconst =
+	imx_ipu_core_entry_single(MX31);
+#endif
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_ipu_core_data imx35_ipu_core_data __initconst =
+	imx_ipu_core_entry_single(MX35);
+#endif
+
+static struct platform_device *imx_ipu_coredev __initdata;
+
+struct platform_device *__init imx_add_ipu_core(
+		const struct imx_ipu_core_data *data,
+		const struct ipu_platform_data *pdata)
+{
+	/* The resource order is important! */
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + 0x5f,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->iobase + 0x88,
+			.end = data->iobase + 0xb3,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->synirq,
+			.end = data->synirq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->errirq,
+			.end = data->errirq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_alloc_mx3_camera(
+		const struct imx_ipu_core_data *data,
+		const struct mx3_camera_pdata *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase + 0x60,
+			.end = data->iobase + 0x87,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+	int ret = -ENOMEM;
+	struct platform_device *pdev;
+
+	if (IS_ERR_OR_NULL(imx_ipu_coredev))
+		return ERR_PTR(-ENODEV);
+
+	pdev = platform_device_alloc("mx3-camera", 0);
+	if (!pdev)
+		goto err;
+
+	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+	if (!pdev->dev.dma_mask)
+		goto err;
+
+	*pdev->dev.dma_mask = DMA_BIT_MASK(32);
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret)
+		goto err;
+
+	if (pdata) {
+		struct mx3_camera_pdata *copied_pdata;
+
+		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+		if (ret) {
+err:
+			kfree(pdev->dev.dma_mask);
+			platform_device_put(pdev);
+			return ERR_PTR(-ENODEV);
+		}
+		copied_pdata = dev_get_platdata(&pdev->dev);
+		copied_pdata->dma_dev = &imx_ipu_coredev->dev;
+	}
+
+	return pdev;
+}
+
+struct platform_device *__init imx_add_mx3_sdc_fb(
+		const struct imx_ipu_core_data *data,
+		struct mx3fb_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase + 0xb4,
+			.end = data->iobase + 0x1bf,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+
+	if (IS_ERR_OR_NULL(imx_ipu_coredev))
+		return ERR_PTR(-ENODEV);
+
+	pdata->dma_dev = &imx_ipu_coredev->dev;
+
+	return imx_add_platform_device_dmamask("mx3_sdc_fb", -1,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
+			DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index b0bc1987c1d3..fa8477337f91 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -166,6 +166,24 @@ struct platform_device *__init imx_add_imx_udc(
 		const struct imx_imx_udc_data *data,
 		const struct imxusb_platform_data *pdata);
 
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/mx3_camera.h>
+struct imx_ipu_core_data {
+	resource_size_t iobase;
+	resource_size_t synirq;
+	resource_size_t errirq;
+};
+struct platform_device *__init imx_add_ipu_core(
+		const struct imx_ipu_core_data *data,
+		const struct ipu_platform_data *pdata);
+struct platform_device *__init imx_alloc_mx3_camera(
+		const struct imx_ipu_core_data *data,
+		const struct mx3_camera_pdata *pdata);
+struct platform_device *__init imx_add_mx3_sdc_fb(
+		const struct imx_ipu_core_data *data,
+		struct mx3fb_platform_data *pdata);
+
 #include <mach/mx1_camera.h>
 struct imx_mx1_camera_data {
 	resource_size_t iobase;
-- 
cgit v1.2.3


From 12dc7eff5921882814181adcb8d7ab10224fa5dd Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Thu, 17 Mar 2011 09:40:29 +0100
Subject: ARM: imx: move mx3 support to mach-imx
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fixing a few "please, no space before tabs" and "empty line at end of
file" warnings on the way.

LAKML-Reference: 1299271882-2130-6-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                              |   2 +-
 arch/arm/mach-imx/Kconfig                      | 274 +++++++++
 arch/arm/mach-imx/Makefile                     |  37 +-
 arch/arm/mach-imx/Makefile.boot                |   4 +
 arch/arm/mach-imx/cache-l2x0.c                 |  56 ++
 arch/arm/mach-imx/clock-imx31.c                | 629 ++++++++++++++++++++
 arch/arm/mach-imx/clock-imx35.c                | 549 ++++++++++++++++++
 arch/arm/mach-imx/cpu-imx31.c                  |  57 ++
 arch/arm/mach-imx/cpu-imx35.c                  |  44 ++
 arch/arm/mach-imx/crmregs-imx31.h              | 248 ++++++++
 arch/arm/mach-imx/devices-imx31.h              |  80 +++
 arch/arm/mach-imx/devices-imx35.h              |  83 +++
 arch/arm/mach-imx/ehci-imx31.c                 |  82 +++
 arch/arm/mach-imx/ehci-imx35.c                 |  79 +++
 arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 303 ++++++++++
 arch/arm/mach-imx/iomux-imx31.c                | 181 ++++++
 arch/arm/mach-imx/mach-armadillo5x0.c          | 565 ++++++++++++++++++
 arch/arm/mach-imx/mach-bug.c                   |  65 +++
 arch/arm/mach-imx/mach-cpuimx35.c              | 201 +++++++
 arch/arm/mach-imx/mach-kzm_arm11_01.c          | 278 +++++++++
 arch/arm/mach-imx/mach-mx31_3ds.c              | 771 +++++++++++++++++++++++++
 arch/arm/mach-imx/mach-mx31ads.c               | 542 +++++++++++++++++
 arch/arm/mach-imx/mach-mx31lilly.c             | 302 ++++++++++
 arch/arm/mach-imx/mach-mx31lite.c              | 287 +++++++++
 arch/arm/mach-imx/mach-mx31moboard.c           | 583 +++++++++++++++++++
 arch/arm/mach-imx/mach-mx35_3ds.c              | 224 +++++++
 arch/arm/mach-imx/mach-pcm037.c                | 696 ++++++++++++++++++++++
 arch/arm/mach-imx/mach-pcm037_eet.c            | 179 ++++++
 arch/arm/mach-imx/mach-pcm043.c                | 423 ++++++++++++++
 arch/arm/mach-imx/mach-qong.c                  | 269 +++++++++
 arch/arm/mach-imx/mach-vpr200.c                | 322 +++++++++++
 arch/arm/mach-imx/mm-imx31.c                   |  66 +++
 arch/arm/mach-imx/mm-imx35.c                   |  63 ++
 arch/arm/mach-imx/mx31lilly-db.c               | 216 +++++++
 arch/arm/mach-imx/mx31lite-db.c                | 203 +++++++
 arch/arm/mach-imx/mx31moboard-devboard.c       | 242 ++++++++
 arch/arm/mach-imx/mx31moboard-marxbot.c        | 366 ++++++++++++
 arch/arm/mach-imx/mx31moboard-smartbot.c       | 209 +++++++
 arch/arm/mach-imx/pcm037.h                     |  11 +
 arch/arm/mach-mx3/Kconfig                      | 270 ---------
 arch/arm/mach-mx3/Makefile                     |  26 -
 arch/arm/mach-mx3/Makefile.boot                |   3 -
 arch/arm/mach-mx3/clock-imx31.c                | 630 --------------------
 arch/arm/mach-mx3/clock-imx35.c                | 550 ------------------
 arch/arm/mach-mx3/cpu.c                        |  89 ---
 arch/arm/mach-mx3/crm_regs.h                   | 248 --------
 arch/arm/mach-mx3/devices-imx31.h              |  80 ---
 arch/arm/mach-mx3/devices-imx35.h              |  83 ---
 arch/arm/mach-mx3/ehci-imx31.c                 |  83 ---
 arch/arm/mach-mx3/ehci-imx35.c                 |  80 ---
 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c   | 303 ----------
 arch/arm/mach-mx3/iomux-imx31.c                | 181 ------
 arch/arm/mach-mx3/mach-armadillo5x0.c          | 565 ------------------
 arch/arm/mach-mx3/mach-bug.c                   |  65 ---
 arch/arm/mach-mx3/mach-cpuimx35.c              | 201 -------
 arch/arm/mach-mx3/mach-kzm_arm11_01.c          | 278 ---------
 arch/arm/mach-mx3/mach-mx31_3ds.c              | 771 -------------------------
 arch/arm/mach-mx3/mach-mx31ads.c               | 542 -----------------
 arch/arm/mach-mx3/mach-mx31lilly.c             | 302 ----------
 arch/arm/mach-mx3/mach-mx31lite.c              | 287 ---------
 arch/arm/mach-mx3/mach-mx31moboard.c           | 583 -------------------
 arch/arm/mach-mx3/mach-mx35_3ds.c              | 224 -------
 arch/arm/mach-mx3/mach-pcm037.c                | 696 ----------------------
 arch/arm/mach-mx3/mach-pcm037_eet.c            | 179 ------
 arch/arm/mach-mx3/mach-pcm043.c                | 423 --------------
 arch/arm/mach-mx3/mach-qong.c                  | 269 ---------
 arch/arm/mach-mx3/mach-vpr200.c                | 322 -----------
 arch/arm/mach-mx3/mm.c                         | 141 -----
 arch/arm/mach-mx3/mx31lilly-db.c               | 217 -------
 arch/arm/mach-mx3/mx31lite-db.c                | 203 -------
 arch/arm/mach-mx3/mx31moboard-devboard.c       | 242 --------
 arch/arm/mach-mx3/mx31moboard-marxbot.c        | 366 ------------
 arch/arm/mach-mx3/mx31moboard-smartbot.c       | 209 -------
 arch/arm/mach-mx3/pcm037.h                     |  11 -
 arch/arm/plat-mxc/Kconfig                      |   1 -
 75 files changed, 9783 insertions(+), 9731 deletions(-)
 create mode 100644 arch/arm/mach-imx/cache-l2x0.c
 create mode 100644 arch/arm/mach-imx/clock-imx31.c
 create mode 100644 arch/arm/mach-imx/clock-imx35.c
 create mode 100644 arch/arm/mach-imx/cpu-imx31.c
 create mode 100644 arch/arm/mach-imx/cpu-imx35.c
 create mode 100644 arch/arm/mach-imx/crmregs-imx31.h
 create mode 100644 arch/arm/mach-imx/devices-imx31.h
 create mode 100644 arch/arm/mach-imx/devices-imx35.h
 create mode 100644 arch/arm/mach-imx/ehci-imx31.c
 create mode 100644 arch/arm/mach-imx/ehci-imx35.c
 create mode 100644 arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
 create mode 100644 arch/arm/mach-imx/iomux-imx31.c
 create mode 100644 arch/arm/mach-imx/mach-armadillo5x0.c
 create mode 100644 arch/arm/mach-imx/mach-bug.c
 create mode 100644 arch/arm/mach-imx/mach-cpuimx35.c
 create mode 100644 arch/arm/mach-imx/mach-kzm_arm11_01.c
 create mode 100644 arch/arm/mach-imx/mach-mx31_3ds.c
 create mode 100644 arch/arm/mach-imx/mach-mx31ads.c
 create mode 100644 arch/arm/mach-imx/mach-mx31lilly.c
 create mode 100644 arch/arm/mach-imx/mach-mx31lite.c
 create mode 100644 arch/arm/mach-imx/mach-mx31moboard.c
 create mode 100644 arch/arm/mach-imx/mach-mx35_3ds.c
 create mode 100644 arch/arm/mach-imx/mach-pcm037.c
 create mode 100644 arch/arm/mach-imx/mach-pcm037_eet.c
 create mode 100644 arch/arm/mach-imx/mach-pcm043.c
 create mode 100644 arch/arm/mach-imx/mach-qong.c
 create mode 100644 arch/arm/mach-imx/mach-vpr200.c
 create mode 100644 arch/arm/mach-imx/mm-imx31.c
 create mode 100644 arch/arm/mach-imx/mm-imx35.c
 create mode 100644 arch/arm/mach-imx/mx31lilly-db.c
 create mode 100644 arch/arm/mach-imx/mx31lite-db.c
 create mode 100644 arch/arm/mach-imx/mx31moboard-devboard.c
 create mode 100644 arch/arm/mach-imx/mx31moboard-marxbot.c
 create mode 100644 arch/arm/mach-imx/mx31moboard-smartbot.c
 create mode 100644 arch/arm/mach-imx/pcm037.h
 delete mode 100644 arch/arm/mach-mx3/Kconfig
 delete mode 100644 arch/arm/mach-mx3/Makefile
 delete mode 100644 arch/arm/mach-mx3/Makefile.boot
 delete mode 100644 arch/arm/mach-mx3/clock-imx31.c
 delete mode 100644 arch/arm/mach-mx3/clock-imx35.c
 delete mode 100644 arch/arm/mach-mx3/cpu.c
 delete mode 100644 arch/arm/mach-mx3/crm_regs.h
 delete mode 100644 arch/arm/mach-mx3/devices-imx31.h
 delete mode 100644 arch/arm/mach-mx3/devices-imx35.h
 delete mode 100644 arch/arm/mach-mx3/ehci-imx31.c
 delete mode 100644 arch/arm/mach-mx3/ehci-imx35.c
 delete mode 100644 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
 delete mode 100644 arch/arm/mach-mx3/iomux-imx31.c
 delete mode 100644 arch/arm/mach-mx3/mach-armadillo5x0.c
 delete mode 100644 arch/arm/mach-mx3/mach-bug.c
 delete mode 100644 arch/arm/mach-mx3/mach-cpuimx35.c
 delete mode 100644 arch/arm/mach-mx3/mach-kzm_arm11_01.c
 delete mode 100644 arch/arm/mach-mx3/mach-mx31_3ds.c
 delete mode 100644 arch/arm/mach-mx3/mach-mx31ads.c
 delete mode 100644 arch/arm/mach-mx3/mach-mx31lilly.c
 delete mode 100644 arch/arm/mach-mx3/mach-mx31lite.c
 delete mode 100644 arch/arm/mach-mx3/mach-mx31moboard.c
 delete mode 100644 arch/arm/mach-mx3/mach-mx35_3ds.c
 delete mode 100644 arch/arm/mach-mx3/mach-pcm037.c
 delete mode 100644 arch/arm/mach-mx3/mach-pcm037_eet.c
 delete mode 100644 arch/arm/mach-mx3/mach-pcm043.c
 delete mode 100644 arch/arm/mach-mx3/mach-qong.c
 delete mode 100644 arch/arm/mach-mx3/mach-vpr200.c
 delete mode 100644 arch/arm/mach-mx3/mm.c
 delete mode 100644 arch/arm/mach-mx3/mx31lilly-db.c
 delete mode 100644 arch/arm/mach-mx3/mx31lite-db.c
 delete mode 100644 arch/arm/mach-mx3/mx31moboard-devboard.c
 delete mode 100644 arch/arm/mach-mx3/mx31moboard-marxbot.c
 delete mode 100644 arch/arm/mach-mx3/mx31moboard-smartbot.c
 delete mode 100644 arch/arm/mach-mx3/pcm037.h

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c7d321a3d95d..5af05ab6587a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -158,7 +158,7 @@ machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= imx
 machine-$(CONFIG_ARCH_MX2)		:= imx
 machine-$(CONFIG_ARCH_MX25)		:= imx
-machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MX3)		:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_MXS)		:= mxs
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4ac00e9fdbe8..13e6f819d52a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,15 @@
 config IMX_HAVE_DMA_V1
 	bool
+#
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX31
+	bool
+
+config ARCH_MX35
+	bool
 
 config SOC_IMX1
 	bool
@@ -31,6 +41,22 @@ config SOC_IMX27
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
+config SOC_IMX31
+	bool
+	select IMX_HAVE_PLATFORM_MXC_RNGA
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_MX31
+	select MXC_AVIC
+
+config SOC_IMX35
+	bool
+	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
+	select HAVE_EPIT
+	select ARCH_MX35
+	select MXC_AVIC
+
+
 if ARCH_MX1
 
 comment "MX1 platforms:"
@@ -316,3 +342,251 @@ config MACH_IMX27IPCAM
 	  configurations for the board and its peripherals.
 
 endif
+
+if ARCH_MX3
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+	bool "Support MX31ADS platforms"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for MX31ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+	bool "Support Wolfson Microelectronics 1133-EV1 module"
+	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
+	  and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+	bool "Support MX31 LITEKIT (LogicPD)"
+	select SOC_IMX31
+	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX31 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM037
+	bool "Support Phytec pcm037 (i.MX31) platforms"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Phytec pcm037 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
+config MACH_MX31_3DS
+	bool "Support MX31PDK (3DS)"
+	select SOC_IMX31
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for MX31PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+	bool "Make the MXC NAND driver use the in flash Bad Block Table"
+	depends on MACH_MX31_3DS
+	depends on MTD_NAND_MXC
+	help
+	  Enable this if you want that the MXC NAND driver uses the in flash
+	  Bad Block Table to know what blocks are bad instead of scanning the
+	  entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for mx31moboard platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_QONG
+	bool "Support Dave/DENX QongEVB-LITE platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for Dave/DENX QongEVB-LITE platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_BUG
+	bool "Support Buglabs BUGBase platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for BUGBase 1.3 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+comment "MX35 platforms:"
+
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select SOC_IMX35
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX35
+	bool "Support Eukrea CPUIMX35 Platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Eukrea CPUIMX35 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX35
+	default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_VPR200
+	bool "Support VPR200 platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for VPR200 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index b85794d27991..6d51e65217ee 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,9 +1,3 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
 obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 
 obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
@@ -14,18 +8,26 @@ obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
 obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
+obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+
 # Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
 
+# i.MX1 based machines
 obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
 
+# i.MX21 based machines
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
+# i.MX25 based machines
 obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
 
+# i.MX27 based machines
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
@@ -37,3 +39,24 @@ obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
 obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
 obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
+
+# i.MX31 based machines
+obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
+obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
+		mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG) += mach-qong.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_BUG) += mach-bug.o
+
+# i.MX35 based machines
+obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
+obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 3953d60bff0b..ebee18b3884c 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -13,3 +13,7 @@ initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
 zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
 params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
 initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
+
+zreladdr-$(CONFIG_ARCH_MX3)	:= 0x80008000
+params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
+initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000
diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c
new file mode 100644
index 000000000000..69d1322add3c
--- /dev/null
+++ b/arch/arm/mach-imx/cache-l2x0.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/hardware.h>
+
+static int mxc_init_l2x0(void)
+{
+	void __iomem *l2x0_base;
+	void __iomem *clkctl_base;
+
+	if (!cpu_is_mx31() && !cpu_is_mx35())
+		return 0;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+	if (clkctl_base != NULL) {
+		writel(0x00000515, clkctl_base + L2_MEM_VAL);
+		iounmap(clkctl_base);
+	} else {
+		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+	}
+
+	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+	if (IS_ERR(l2x0_base)) {
+		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+				PTR_ERR(l2x0_base));
+		return 0;
+	}
+
+	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+
+	return 0;
+}
+arch_initcall(mxc_init_l2x0);
diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c
new file mode 100644
index 000000000000..25f343fca2b9
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx31.c
@@ -0,0 +1,629 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+
+#include <asm/div64.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/mx31.h>
+#include <mach/common.h>
+
+#include "crmregs-imx31.h"
+
+#define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
+
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
+{
+	u32 min_pre, temp_pre, old_err, err;
+
+	if (div >= 512) {
+		*pre = 8;
+		*post = 64;
+	} else if (div >= 64) {
+		min_pre = (div - 1) / 64 + 1;
+		old_err = 8;
+		for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+			err = div % temp_pre;
+			if (err == 0) {
+				*pre = temp_pre;
+				break;
+			}
+			err = temp_pre - err;
+			if (err < old_err) {
+				old_err = err;
+				*pre = temp_pre;
+			}
+		}
+		*post = (div + *pre - 1) / *pre;
+	} else if (div <= 8) {
+		*pre = div;
+		*post = 1;
+	} else {
+		*pre = 1;
+		*post = div;
+	}
+}
+
+static struct clk mcu_pll_clk;
+static struct clk serial_pll_clk;
+static struct clk ipg_clk;
+static struct clk ckih_clk;
+
+static int cgr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	if (!clk->enable_reg)
+		return 0;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 3 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void cgr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	if (!clk->enable_reg)
+		return;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(3 << clk->enable_shift);
+
+	/* special case for EMI clock */
+	if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
+		reg |= (1 << clk->enable_shift);
+
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long pll_ref_get_rate(void)
+{
+	unsigned long ccmr;
+	unsigned int prcs;
+
+	ccmr = __raw_readl(MXC_CCM_CCMR);
+	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+	if (prcs == 0x1)
+		return CKIL_CLK_FREQ * 1024;
+	else
+		return clk_get_rate(&ckih_clk);
+}
+
+static unsigned long usb_pll_get_rate(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(MXC_CCM_UPCTL);
+
+	return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long serial_pll_get_rate(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(MXC_CCM_SRPCTL);
+
+	return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long mcu_pll_get_rate(struct clk *clk)
+{
+	unsigned long reg, ccmr;
+
+	ccmr = __raw_readl(MXC_CCM_CCMR);
+
+	if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
+		return clk_get_rate(&ckih_clk);
+
+	reg = __raw_readl(MXC_CCM_MPCTL);
+
+	return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static int usb_pll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg |= MXC_CCM_CCMR_UPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+
+	/* No lock bit on MX31, so using max time from spec */
+	udelay(80);
+
+	return 0;
+}
+
+static void usb_pll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_UPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+}
+
+static int serial_pll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg |= MXC_CCM_CCMR_SPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+
+	/* No lock bit on MX31, so using max time from spec */
+	udelay(80);
+
+	return 0;
+}
+
+static void serial_pll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_SPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+}
+
+#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
+#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
+#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
+
+static unsigned long mcu_main_get_rate(struct clk *clk)
+{
+	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
+
+	if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
+		return clk_get_rate(&serial_pll_clk);
+	else
+		return clk_get_rate(&mcu_pll_clk);
+}
+
+static unsigned long ahb_get_rate(struct clk *clk)
+{
+	unsigned long max_pdf;
+
+	max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
+		       MXC_CCM_PDR0_MAX_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (max_pdf + 1);
+}
+
+static unsigned long ipg_get_rate(struct clk *clk)
+{
+	unsigned long ipg_pdf;
+
+	ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
+		       MXC_CCM_PDR0_IPG_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
+}
+
+static unsigned long nfc_get_rate(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+
+	nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
+		       MXC_CCM_PDR0_NFC_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
+}
+
+static unsigned long hsp_get_rate(struct clk *clk)
+{
+	unsigned long hsp_pdf;
+
+	hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
+		       MXC_CCM_PDR0_HSP_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
+}
+
+static unsigned long usb_get_rate(struct clk *clk)
+{
+	unsigned long usb_pdf, usb_prepdf;
+
+	usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
+		       MXC_CCM_PDR1_USB_PODF_OFFSET);
+	usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
+			  MXC_CCM_PDR1_USB_PRDF_OFFSET);
+	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
+}
+
+static unsigned long csi_get_rate(struct clk *clk)
+{
+	u32 reg, pre, post;
+
+	reg = __raw_readl(MXC_CCM_PDR0);
+	pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
+	    MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+	pre++;
+	post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
+	    MXC_CCM_PDR0_CSI_PODF_OFFSET;
+	post++;
+	return clk_get_rate(clk->parent) / (pre * post);
+}
+
+static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 pre, post, parent = clk_get_rate(clk->parent);
+	u32 div = parent / rate;
+
+	if (parent % rate)
+		div++;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	return parent / (pre * post);
+}
+
+static int csi_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+	div = parent / rate;
+
+	if ((parent / div) != rate)
+		return -EINVAL;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	/* Set CSI clock divider */
+	reg = __raw_readl(MXC_CCM_PDR0) &
+	    ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
+	reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
+	reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+	__raw_writel(reg, MXC_CCM_PDR0);
+
+	return 0;
+}
+
+static unsigned long ssi1_get_rate(struct clk *clk)
+{
+	unsigned long ssi1_pdf, ssi1_prepdf;
+
+	ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
+			MXC_CCM_PDR1_SSI1_PODF_OFFSET);
+	ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
+			   MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
+}
+
+static unsigned long ssi2_get_rate(struct clk *clk)
+{
+	unsigned long ssi2_pdf, ssi2_prepdf;
+
+	ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
+			MXC_CCM_PDR1_SSI2_PODF_OFFSET);
+	ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
+			   MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
+}
+
+static unsigned long firi_get_rate(struct clk *clk)
+{
+	unsigned long firi_pdf, firi_prepdf;
+
+	firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
+			MXC_CCM_PDR1_FIRI_PODF_OFFSET);
+	firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
+			   MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
+}
+
+static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 pre, post;
+	u32 parent = clk_get_rate(clk->parent);
+	u32 div = parent / rate;
+
+	if (parent % rate)
+		div++;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	return parent / (pre * post);
+
+}
+
+static int firi_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+	div = parent / rate;
+
+	if ((parent / div) != rate)
+		return -EINVAL;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	/* Set FIRI clock divider */
+	reg = __raw_readl(MXC_CCM_PDR1) &
+	    ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
+	reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
+	reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_PDR1);
+
+	return 0;
+}
+
+static unsigned long mbx_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 2;
+}
+
+static unsigned long mstick1_get_rate(struct clk *clk)
+{
+	unsigned long msti_pdf;
+
+	msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
+			MXC_CCM_PDR2_MST1_PDF_OFFSET);
+	return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long mstick2_get_rate(struct clk *clk)
+{
+	unsigned long msti_pdf;
+
+	msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
+			MXC_CCM_PDR2_MST2_PDF_OFFSET);
+	return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+	return ckih_rate;
+}
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
+static struct clk ckih_clk = {
+	.get_rate = clk_ckih_get_rate,
+};
+
+static struct clk mcu_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = mcu_pll_get_rate,
+};
+
+static struct clk mcu_main_clk = {
+	.parent = &mcu_pll_clk,
+	.get_rate = mcu_main_get_rate,
+};
+
+static struct clk serial_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = serial_pll_get_rate,
+	.enable = serial_pll_enable,
+	.disable = serial_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = usb_pll_get_rate,
+	.enable = usb_pll_enable,
+	.disable = usb_pll_disable,
+};
+
+static struct clk ahb_clk = {
+	.parent = &mcu_main_clk,
+	.get_rate = ahb_get_rate,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.enable		= cgr_enable,		\
+		.disable	= cgr_disable,		\
+		.secondary	= s,			\
+		.parent		= p,			\
+	}
+
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
+	static struct clk name = {				\
+		.id		= i,				\
+		.enable_reg	= er,				\
+		.enable_shift	= es,				\
+		.get_rate	= getsetround##_get_rate,	\
+		.set_rate	= getsetround##_set_rate,	\
+		.round_rate	= getsetround##_round_rate,	\
+		.enable		= cgr_enable,			\
+		.disable	= cgr_disable,			\
+		.secondary	= s,				\
+		.parent		= p,				\
+	}
+
+DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
+
+DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart2_clk,   1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(ssi1_clk,    0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(i2c1_clk,    0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c2_clk,    1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
+DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ckil_clk);
+DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(kpp_clk,     0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipu_clk,     0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
+DEFINE_CLOCK(uart3_clk,   2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart4_clk,   3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart5_clk,   4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(owire_clk,   0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(ssi2_clk,    1, MXC_CCM_CGR2,  0, ssi2_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(cspi1_clk,   0, MXC_CCM_CGR2,  2, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk,   1, MXC_CCM_CGR2,  4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mbx_clk,     0, MXC_CCM_CGR2,  6, mbx_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk,     0, MXC_CCM_CGR2,  8, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk,    0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK1(firi_clk,   0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
+
+DEFINE_CLOCK(sdma_clk2,   0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK(NULL, "firi", firi_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "rng", rng_clk)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1)
+	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
+	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
+	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
+	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+};
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+	u32 reg;
+
+	ckih_rate = fref;
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	/* change the csi_clk parent if necessary */
+	reg = __raw_readl(MXC_CCM_CCMR);
+	if (!(reg & MXC_CCM_CCMR_CSCS))
+		if (clk_set_parent(&csi_clk, &usb_pll_clk))
+			pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
+	/* Turn off all possible clocks */
+	__raw_writel((3 << 4), MXC_CCM_CGR0);
+	__raw_writel(0, MXC_CCM_CGR1);
+	__raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
+		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
+					   MX32, but still required to be set */
+		     MXC_CCM_CGR2);
+
+	/*
+	 * Before turning off usb_pll make sure ipg_per_clk is generated
+	 * by ipg_clk and not usb_pll.
+	 */
+	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
+	usb_pll_disable(&usb_pll_clk);
+
+	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
+
+	clk_enable(&gpt_clk);
+	clk_enable(&emi_clk);
+	clk_enable(&iim_clk);
+
+	clk_enable(&serial_pll_clk);
+
+	mx31_read_cpu_rev();
+
+	if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
+		reg = __raw_readl(MXC_CCM_PMCR1);
+		/* No PLL restart on DVFS switch; enable auto EMI handshake */
+		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
+		__raw_writel(reg, MXC_CCM_PMCR1);
+	}
+
+	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+			MX31_INT_GPT);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
new file mode 100644
index 000000000000..5a4cc1ea405b
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -0,0 +1,549 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#define CCM_BASE	MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
+
+#define CCM_CCMR        0x00
+#define CCM_PDR0        0x04
+#define CCM_PDR1        0x08
+#define CCM_PDR2        0x0C
+#define CCM_PDR3        0x10
+#define CCM_PDR4        0x14
+#define CCM_RCSR        0x18
+#define CCM_MPCTL       0x1C
+#define CCM_PPCTL       0x20
+#define CCM_ACMR        0x24
+#define CCM_COSR        0x28
+#define CCM_CGR0        0x2C
+#define CCM_CGR1        0x30
+#define CCM_CGR2        0x34
+#define CCM_CGR3        0x38
+
+#ifdef HAVE_SET_RATE_SUPPORT
+static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
+{
+	u32 min_pre, temp_pre, old_err, err;
+
+	min_pre = (div - 1) / maxpost + 1;
+	old_err = 8;
+
+	for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+		if (div > (temp_pre * maxpost))
+			break;
+
+		if (div < (temp_pre * temp_pre))
+			continue;
+
+		err = div % temp_pre;
+
+		if (err == 0) {
+			*pre = temp_pre;
+			break;
+		}
+
+		err = temp_pre - err;
+
+		if (err < old_err) {
+			old_err = err;
+			*pre = temp_pre;
+		}
+	}
+
+	*post = (div + *pre - 1) / *pre;
+}
+
+/* get the best values for a 3-bit divider combined with a 6-bit divider */
+static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
+{
+	if (div >= 512) {
+		*pre = 8;
+		*post = 64;
+	} else if (div >= 64) {
+		calc_dividers(div, pre, post, 64);
+	} else if (div <= 8) {
+		*pre = div;
+		*post = 1;
+	} else {
+		*pre = 1;
+		*post = div;
+	}
+}
+
+/* get the best values for two cascaded 3-bit dividers */
+static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
+{
+	if (div >= 64) {
+		*pre = *post = 8;
+	} else if (div > 8) {
+		calc_dividers(div, pre, post, 8);
+	} else {
+		*pre = 1;
+		*post = div;
+	}
+}
+#endif
+
+static unsigned long get_rate_mpll(void)
+{
+	ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_ppll(void)
+{
+	ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL);
+
+	return mxc_decode_pll(ppctl, 24000000);
+}
+
+struct arm_ahb_div {
+	unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+	{ .arm = 1, .ahb = 4, .sel = 0},
+	{ .arm = 1, .ahb = 3, .sel = 1},
+	{ .arm = 2, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 1, .sel = 0},
+	{ .arm = 1, .ahb = 5, .sel = 0},
+	{ .arm = 1, .ahb = 8, .sel = 0},
+	{ .arm = 1, .ahb = 6, .sel = 1},
+	{ .arm = 2, .ahb = 4, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+	{ .arm = 4, .ahb = 2, .sel = 0},
+	{ .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static unsigned long get_rate_arm(void)
+{
+	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+	struct arm_ahb_div *aad;
+	unsigned long fref = get_rate_mpll();
+
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+	if (aad->sel)
+		fref = fref * 3 / 4;
+
+	return fref / aad->arm;
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+	struct arm_ahb_div *aad;
+	unsigned long fref = get_rate_arm();
+
+	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+
+	return fref / aad->ahb;
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
+
+	if (pdr3 & (1 << 14))
+		return get_rate_arm() / div;
+	else
+		return get_rate_ppll() / div;
+}
+
+static unsigned long get_rate_sdhc(struct clk *clk)
+{
+	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+	unsigned long div, rate;
+
+	if (pdr3 & (1 << 6))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	switch (clk->id) {
+	default:
+	case 0:
+		div = pdr3 & 0x3f;
+		break;
+	case 1:
+		div = (pdr3 >> 8) & 0x3f;
+		break;
+	case 2:
+		div = (pdr3 >> 16) & 0x3f;
+		break;
+	}
+
+	return rate / (div + 1);
+}
+
+static unsigned long get_rate_mshc(struct clk *clk)
+{
+	unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1);
+	unsigned long div1, div2, rate;
+
+	if (pdr1 & (1 << 7))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	div1 = (pdr1 >> 29) & 0x7;
+	div2 = (pdr1 >> 22) & 0x3f;
+
+	return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_ssi(struct clk *clk)
+{
+	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+	unsigned long div1, div2, rate;
+
+	if (pdr2 & (1 << 6))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	switch (clk->id) {
+	default:
+	case 0:
+		div1 = pdr2 & 0x3f;
+		div2 = (pdr2 >> 24) & 0x7;
+		break;
+	case 1:
+		div1 = (pdr2 >> 8) & 0x3f;
+		div2 = (pdr2 >> 27) & 0x7;
+		break;
+	}
+
+	return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_csi(struct clk *clk)
+{
+	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+	unsigned long rate;
+
+	if (pdr2 & (1 << 7))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	return rate / (((pdr2 >> 16) & 0x3f) + 1);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long rate;
+
+	if (pdr4 & (1 << 9))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	return rate / (((pdr4 >> 22) & 0x3f) + 1);
+}
+
+static unsigned long get_rate_ipg_per(struct clk *clk)
+{
+	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long div;
+
+	if (pdr0 & (1 << 26)) {
+		div = (pdr4 >> 16) & 0x3f;
+		return get_rate_arm() / (div + 1);
+	} else {
+		div = (pdr0 >> 12) & 0x7;
+		return get_rate_ahb(NULL) / (div + 1);
+	}
+}
+
+static unsigned long get_rate_hsp(struct clk *clk)
+{
+	unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
+	unsigned long fref = get_rate_mpll();
+
+	if (fref > 400 * 1000 * 1000) {
+		switch (hsp_podf) {
+		case 0:
+			return fref >> 2;
+		case 1:
+			return fref >> 3;
+		case 2:
+			return fref / 3;
+		}
+	} else {
+		switch (hsp_podf) {
+		case 0:
+		case 2:
+			return fref / 3;
+		case 1:
+			return fref / 6;
+		}
+	}
+
+	return 0;
+}
+
+static int clk_cgr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 3 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_cgr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(3 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= CCM_BASE + er,	\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= clk_cgr_enable,	\
+		.disable	= clk_cgr_disable,	\
+	}
+
+DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
+DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
+/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL); */
+DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
+DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGR0, 10, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk,  1, CCM_CGR0, 12, get_rate_ipg, NULL);
+DEFINE_CLOCK(ect_clk,    0, CCM_CGR0, 14, get_rate_ipg, NULL);
+DEFINE_CLOCK(edio_clk,   0, CCM_CGR0, 16, NULL, NULL);
+DEFINE_CLOCK(emi_clk,    0, CCM_CGR0, 18, get_rate_ipg, NULL);
+DEFINE_CLOCK(epit1_clk,  0, CCM_CGR0, 20, get_rate_ipg, NULL);
+DEFINE_CLOCK(epit2_clk,  1, CCM_CGR0, 22, get_rate_ipg, NULL);
+DEFINE_CLOCK(esai_clk,   0, CCM_CGR0, 24, NULL, NULL);
+DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL);
+
+DEFINE_CLOCK(fec_clk,    0, CCM_CGR1,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpio1_clk,  0, CCM_CGR1,  2, NULL, NULL);
+DEFINE_CLOCK(gpio2_clk,  1, CCM_CGR1,  4, NULL, NULL);
+DEFINE_CLOCK(gpio3_clk,  2, CCM_CGR1,  6, NULL, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGR1,  8, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_hsp, NULL);
+DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
+DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
+DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
+DEFINE_CLOCK(owire_clk,  0, CCM_CGR1, 26, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(pwm_clk,    0, CCM_CGR1, 28, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(rngc_clk,   0, CCM_CGR1, 30, get_rate_ipg, NULL);
+
+DEFINE_CLOCK(rtc_clk,    0, CCM_CGR2,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(rtic_clk,   0, CCM_CGR2,  2, get_rate_ahb, NULL);
+DEFINE_CLOCK(scc_clk,    0, CCM_CGR2,  4, get_rate_ipg, NULL);
+DEFINE_CLOCK(sdma_clk,   0, CCM_CGR2,  6, NULL, NULL);
+DEFINE_CLOCK(spba_clk,   0, CCM_CGR2,  8, get_rate_ipg, NULL);
+DEFINE_CLOCK(spdif_clk,  0, CCM_CGR2, 10, NULL, NULL);
+DEFINE_CLOCK(ssi1_clk,   0, CCM_CGR2, 12, get_rate_ssi, NULL);
+DEFINE_CLOCK(ssi2_clk,   1, CCM_CGR2, 14, get_rate_ssi, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk,  1, CCM_CGR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
+DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
+DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL);
+
+DEFINE_CLOCK(csi_clk,    0, CCM_CGR3,  0, get_rate_csi, NULL);
+DEFINE_CLOCK(iim_clk,    0, CCM_CGR3,  2, NULL, NULL);
+DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
+
+DEFINE_CLOCK(usbahb_clk, 0, 0,         0, get_rate_ahb, NULL);
+
+static int clk_dummy_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	unsigned long div1;
+
+	div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1;
+
+	return get_rate_ahb(NULL) / div1;
+}
+
+/* NAND Controller: It seems it can't be disabled */
+static struct clk nfc_clk = {
+	.id		= 0,
+	.enable_reg	= 0,
+	.enable_shift	= 0,
+	.get_rate	= get_rate_nfc,
+	.set_rate	= NULL, /* set_rate_nfc, */
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable
+};
+
+#define _REGISTER_CLOCK(d, n, c)	\
+	{				\
+		.dev_id = d,		\
+		.con_id = n,		\
+		.clk = &c,		\
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
+	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
+	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK(NULL, "ect", ect_clk)
+	_REGISTER_CLOCK(NULL, "edio", edio_clk)
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
+	_REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
+	_REGISTER_CLOCK(NULL, "esai", esai_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
+	_REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
+	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK(NULL, "rngc", rngc_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+	_REGISTER_CLOCK(NULL, "spba", spba_clk)
+	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK(NULL, "max", max_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+	_REGISTER_CLOCK(NULL, "csi", csi_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+};
+
+int __init mx35_clocks_init()
+{
+	unsigned int cgr2 = 3 << 26, cgr3 = 0;
+
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	cgr2 |= 3 << 16;
+#endif
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
+	 */
+	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
+	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
+			CCM_BASE + CCM_CGR1);
+
+	/*
+	 * Check if we came up in internal boot mode. If yes, we need some
+	 * extra clocks turned on, otherwise the MX35 boot ROM code will
+	 * hang after a watchdog reset.
+	 */
+	if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
+		/* Additionally turn on UART1, SCC, and IIM clocks */
+		cgr2 |= 3 << 16 | 3 << 4;
+		cgr3 |= 3 << 2;
+	}
+
+	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
+
+	clk_enable(&iim_clk);
+	mx35_read_cpu_rev();
+
+#ifdef CONFIG_MXC_USE_EPIT
+	epit_timer_init(&epit1_clk,
+			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+#else
+	mxc_timer_init(&gpt_clk,
+			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
+#endif
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
new file mode 100644
index 000000000000..a3780700a882
--- /dev/null
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -0,0 +1,57 @@
+/*
+ * MX31 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx31_cpu_rev;
+EXPORT_SYMBOL(mx31_cpu_rev);
+
+static struct {
+	u8 srev;
+	const char *name;
+	const char *v;
+	unsigned int rev;
+} mx31_cpu_type[] __initdata = {
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = IMX_CHIP_REVISION_1_0	},
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
+};
+
+void __init mx31_read_cpu_rev(void)
+{
+	u32 i, srev;
+
+	/* read SREV register from IIM module */
+	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+
+	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+		if (srev == mx31_cpu_type[i].srev) {
+			printk(KERN_INFO
+				"CPU identified as %s, silicon rev %s\n",
+				mx31_cpu_type[i].name, mx31_cpu_type[i].v);
+
+			mx31_cpu_rev = mx31_cpu_type[i].rev;
+			return;
+		}
+
+	mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+
+	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+}
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
new file mode 100644
index 000000000000..6637cd819ecb
--- /dev/null
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -0,0 +1,44 @@
+/*
+ * MX35 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx35_cpu_rev;
+EXPORT_SYMBOL(mx35_cpu_rev);
+
+void __init mx35_read_cpu_rev(void)
+{
+	u32 rev;
+	char *srev;
+
+	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+	switch (rev) {
+	case 0x00:
+		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
+		srev = "1.0";
+		break;
+	case 0x10:
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
+		srev = "2.0";
+		break;
+	case 0x11:
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
+		srev = "2.1";
+		break;
+	default:
+		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+		srev = "unknown";
+	}
+
+	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+}
diff --git a/arch/arm/mach-imx/crmregs-imx31.h b/arch/arm/mach-imx/crmregs-imx31.h
new file mode 100644
index 000000000000..37a8a07beda3
--- /dev/null
+++ b/arch/arm/mach-imx/crmregs-imx31.h
@@ -0,0 +1,248 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__
+
+#define CKIH_CLK_FREQ           26000000
+#define CKIH_CLK_FREQ_27MHZ     27000000
+#define CKIL_CLK_FREQ           32768
+
+#define MXC_CCM_BASE		MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
+
+/* Register addresses */
+#define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)
+#define MXC_CCM_PDR0		(MXC_CCM_BASE + 0x04)
+#define MXC_CCM_PDR1		(MXC_CCM_BASE + 0x08)
+#define MXC_CCM_RCSR		(MXC_CCM_BASE + 0x0C)
+#define MXC_CCM_MPCTL		(MXC_CCM_BASE + 0x10)
+#define MXC_CCM_UPCTL		(MXC_CCM_BASE + 0x14)
+#define MXC_CCM_SRPCTL		(MXC_CCM_BASE + 0x18)
+#define MXC_CCM_COSR		(MXC_CCM_BASE + 0x1C)
+#define MXC_CCM_CGR0		(MXC_CCM_BASE + 0x20)
+#define MXC_CCM_CGR1		(MXC_CCM_BASE + 0x24)
+#define MXC_CCM_CGR2		(MXC_CCM_BASE + 0x28)
+#define MXC_CCM_WIMR		(MXC_CCM_BASE + 0x2C)
+#define MXC_CCM_LDC		(MXC_CCM_BASE + 0x30)
+#define MXC_CCM_DCVR0		(MXC_CCM_BASE + 0x34)
+#define MXC_CCM_DCVR1		(MXC_CCM_BASE + 0x38)
+#define MXC_CCM_DCVR2		(MXC_CCM_BASE + 0x3C)
+#define MXC_CCM_DCVR3		(MXC_CCM_BASE + 0x40)
+#define MXC_CCM_LTR0		(MXC_CCM_BASE + 0x44)
+#define MXC_CCM_LTR1		(MXC_CCM_BASE + 0x48)
+#define MXC_CCM_LTR2		(MXC_CCM_BASE + 0x4C)
+#define MXC_CCM_LTR3		(MXC_CCM_BASE + 0x50)
+#define MXC_CCM_LTBR0		(MXC_CCM_BASE + 0x54)
+#define MXC_CCM_LTBR1		(MXC_CCM_BASE + 0x58)
+#define MXC_CCM_PMCR0		(MXC_CCM_BASE + 0x5C)
+#define MXC_CCM_PMCR1		(MXC_CCM_BASE + 0x60)
+#define MXC_CCM_PDR2		(MXC_CCM_BASE + 0x64)
+
+/* Register bit definitions */
+#define MXC_CCM_CCMR_WBEN                       (1 << 27)
+#define MXC_CCM_CCMR_CSCS                       (1 << 25)
+#define MXC_CCM_CCMR_PERCS                      (1 << 24)
+#define MXC_CCM_CCMR_SSI1S_OFFSET               18
+#define MXC_CCM_CCMR_SSI1S_MASK                 (0x3 << 18)
+#define MXC_CCM_CCMR_SSI2S_OFFSET               21
+#define MXC_CCM_CCMR_SSI2S_MASK                 (0x3 << 21)
+#define MXC_CCM_CCMR_LPM_OFFSET                 14
+#define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
+#define MXC_CCM_CCMR_FIRS_OFFSET                11
+#define MXC_CCM_CCMR_FIRS_MASK                  (0x3 << 11)
+#define MXC_CCM_CCMR_UPE                        (1 << 9)
+#define MXC_CCM_CCMR_SPE                        (1 << 8)
+#define MXC_CCM_CCMR_MDS                        (1 << 7)
+#define MXC_CCM_CCMR_SBYCS                      (1 << 4)
+#define MXC_CCM_CCMR_MPE                        (1 << 3)
+#define MXC_CCM_CCMR_PRCS_OFFSET                1
+#define MXC_CCM_CCMR_PRCS_MASK                  (0x3 << 1)
+
+#define MXC_CCM_PDR0_CSI_PODF_OFFSET            26
+#define MXC_CCM_PDR0_CSI_PODF_MASK              (0x3F << 26)
+#define MXC_CCM_PDR0_CSI_PRDF_OFFSET            23
+#define MXC_CCM_PDR0_CSI_PRDF_MASK              (0x7 << 23)
+#define MXC_CCM_PDR0_PER_PODF_OFFSET            16
+#define MXC_CCM_PDR0_PER_PODF_MASK              (0x1F << 16)
+#define MXC_CCM_PDR0_HSP_PODF_OFFSET            11
+#define MXC_CCM_PDR0_HSP_PODF_MASK              (0x7 << 11)
+#define MXC_CCM_PDR0_NFC_PODF_OFFSET            8
+#define MXC_CCM_PDR0_NFC_PODF_MASK              (0x7 << 8)
+#define MXC_CCM_PDR0_IPG_PODF_OFFSET            6
+#define MXC_CCM_PDR0_IPG_PODF_MASK              (0x3 << 6)
+#define MXC_CCM_PDR0_MAX_PODF_OFFSET            3
+#define MXC_CCM_PDR0_MAX_PODF_MASK              (0x7 << 3)
+#define MXC_CCM_PDR0_MCU_PODF_OFFSET            0
+#define MXC_CCM_PDR0_MCU_PODF_MASK              0x7
+
+#define MXC_CCM_PDR1_USB_PRDF_OFFSET            30
+#define MXC_CCM_PDR1_USB_PRDF_MASK              (0x3 << 30)
+#define MXC_CCM_PDR1_USB_PODF_OFFSET            27
+#define MXC_CCM_PDR1_USB_PODF_MASK              (0x7 << 27)
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET       24
+#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK         (0x7 << 24)
+#define MXC_CCM_PDR1_FIRI_PODF_OFFSET           18
+#define MXC_CCM_PDR1_FIRI_PODF_MASK             (0x3F << 18)
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET       15
+#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK         (0x7 << 15)
+#define MXC_CCM_PDR1_SSI2_PODF_OFFSET           9
+#define MXC_CCM_PDR1_SSI2_PODF_MASK             (0x3F << 9)
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET       6
+#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK         (0x7 << 6)
+#define MXC_CCM_PDR1_SSI1_PODF_OFFSET           0
+#define MXC_CCM_PDR1_SSI1_PODF_MASK             0x3F
+
+/* Bit definitions for RCSR */
+#define MXC_CCM_RCSR_NF16B			0x80000000
+
+/*
+ * LTR0 register offsets
+ */
+#define MXC_CCM_LTR0_DIV3CK_OFFSET              1
+#define MXC_CCM_LTR0_DIV3CK_MASK                (0x3 << 1)
+#define MXC_CCM_LTR0_DNTHR_OFFSET               16
+#define MXC_CCM_LTR0_DNTHR_MASK                 (0x3F << 16)
+#define MXC_CCM_LTR0_UPTHR_OFFSET               22
+#define MXC_CCM_LTR0_UPTHR_MASK                 (0x3F << 22)
+
+/*
+ * LTR1 register offsets
+ */
+#define MXC_CCM_LTR1_PNCTHR_OFFSET              0
+#define MXC_CCM_LTR1_PNCTHR_MASK                0x3F
+#define MXC_CCM_LTR1_UPCNT_OFFSET               6
+#define MXC_CCM_LTR1_UPCNT_MASK                 (0xFF << 6)
+#define MXC_CCM_LTR1_DNCNT_OFFSET               14
+#define MXC_CCM_LTR1_DNCNT_MASK                 (0xFF << 14)
+#define MXC_CCM_LTR1_LTBRSR_MASK                0x400000
+#define MXC_CCM_LTR1_LTBRSR_OFFSET              22
+#define MXC_CCM_LTR1_LTBRSR                     0x400000
+#define MXC_CCM_LTR1_LTBRSH                     0x800000
+
+/*
+ * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15
+ */
+#define MXC_CCM_LTR2_WSW_OFFSET(x)              (11 + (x) * 3)
+#define MXC_CCM_LTR2_WSW_MASK(x)                (0x7 << \
+					MXC_CCM_LTR2_WSW_OFFSET((x)))
+#define MXC_CCM_LTR2_EMAC_OFFSET                0
+#define MXC_CCM_LTR2_EMAC_MASK                  0x1FF
+
+/*
+ * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8
+ */
+#define MXC_CCM_LTR3_WSW_OFFSET(x)              (5 + (x) * 3)
+#define MXC_CCM_LTR3_WSW_MASK(x)                (0x7 << \
+					MXC_CCM_LTR3_WSW_OFFSET((x)))
+
+#define MXC_CCM_PMCR0_DFSUP1                    0x80000000
+#define MXC_CCM_PMCR0_DFSUP1_SPLL               (0 << 31)
+#define MXC_CCM_PMCR0_DFSUP1_MPLL               (1 << 31)
+#define MXC_CCM_PMCR0_DFSUP0                    0x40000000
+#define MXC_CCM_PMCR0_DFSUP0_PLL                (0 << 30)
+#define MXC_CCM_PMCR0_DFSUP0_PDR                (1 << 30)
+#define MXC_CCM_PMCR0_DFSUP_MASK                (0x3 << 30)
+
+#define DVSUP_TURBO				0
+#define DVSUP_HIGH				1
+#define DVSUP_MEDIUM				2
+#define DVSUP_LOW				3
+#define MXC_CCM_PMCR0_DVSUP_TURBO               (DVSUP_TURBO << 28)
+#define MXC_CCM_PMCR0_DVSUP_HIGH                (DVSUP_HIGH << 28)
+#define MXC_CCM_PMCR0_DVSUP_MEDIUM              (DVSUP_MEDIUM << 28)
+#define MXC_CCM_PMCR0_DVSUP_LOW                 (DVSUP_LOW << 28)
+#define MXC_CCM_PMCR0_DVSUP_OFFSET              28
+#define MXC_CCM_PMCR0_DVSUP_MASK                (0x3 << 28)
+#define MXC_CCM_PMCR0_UDSC                      0x08000000
+#define MXC_CCM_PMCR0_UDSC_MASK                 (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_UP                   (1 << 27)
+#define MXC_CCM_PMCR0_UDSC_DOWN                 (0 << 27)
+
+#define MXC_CCM_PMCR0_VSCNT_1                   (0x0 << 24)
+#define MXC_CCM_PMCR0_VSCNT_2                   (0x1 << 24)
+#define MXC_CCM_PMCR0_VSCNT_3                   (0x2 << 24)
+#define MXC_CCM_PMCR0_VSCNT_4                   (0x3 << 24)
+#define MXC_CCM_PMCR0_VSCNT_5                   (0x4 << 24)
+#define MXC_CCM_PMCR0_VSCNT_6                   (0x5 << 24)
+#define MXC_CCM_PMCR0_VSCNT_7                   (0x6 << 24)
+#define MXC_CCM_PMCR0_VSCNT_8                   (0x7 << 24)
+#define MXC_CCM_PMCR0_VSCNT_OFFSET              24
+#define MXC_CCM_PMCR0_VSCNT_MASK                (0x7 << 24)
+#define MXC_CCM_PMCR0_DVFEV                     0x00800000
+#define MXC_CCM_PMCR0_DVFIS                     0x00400000
+#define MXC_CCM_PMCR0_LBMI                      0x00200000
+#define MXC_CCM_PMCR0_LBFL                      0x00100000
+#define MXC_CCM_PMCR0_LBCF_4                    (0x0 << 18)
+#define MXC_CCM_PMCR0_LBCF_8                    (0x1 << 18)
+#define MXC_CCM_PMCR0_LBCF_12                   (0x2 << 18)
+#define MXC_CCM_PMCR0_LBCF_16                   (0x3 << 18)
+#define MXC_CCM_PMCR0_LBCF_OFFSET               18
+#define MXC_CCM_PMCR0_LBCF_MASK                 (0x3 << 18)
+#define MXC_CCM_PMCR0_PTVIS                     0x00020000
+#define MXC_CCM_PMCR0_UPDTEN                    0x00010000
+#define MXC_CCM_PMCR0_UPDTEN_MASK               (0x1 << 16)
+#define MXC_CCM_PMCR0_FSVAIM                    0x00008000
+#define MXC_CCM_PMCR0_FSVAI_OFFSET              13
+#define MXC_CCM_PMCR0_FSVAI_MASK                (0x3 << 13)
+#define MXC_CCM_PMCR0_DPVCR                     0x00001000
+#define MXC_CCM_PMCR0_DPVV                      0x00000800
+#define MXC_CCM_PMCR0_WFIM                      0x00000400
+#define MXC_CCM_PMCR0_DRCE3                     0x00000200
+#define MXC_CCM_PMCR0_DRCE2                     0x00000100
+#define MXC_CCM_PMCR0_DRCE1                     0x00000080
+#define MXC_CCM_PMCR0_DRCE0                     0x00000040
+#define MXC_CCM_PMCR0_DCR                       0x00000020
+#define MXC_CCM_PMCR0_DVFEN                     0x00000010
+#define MXC_CCM_PMCR0_PTVAIM                    0x00000008
+#define MXC_CCM_PMCR0_PTVAI_OFFSET              1
+#define MXC_CCM_PMCR0_PTVAI_MASK                (0x3 << 1)
+#define MXC_CCM_PMCR0_DPTEN                     0x00000001
+
+#define MXC_CCM_PMCR1_DVGP_OFFSET               0
+#define MXC_CCM_PMCR1_DVGP_MASK                 (0xF)
+
+#define MXC_CCM_PMCR1_PLLRDIS                      (0x1 << 7)
+#define MXC_CCM_PMCR1_EMIRQ_EN                      (0x1 << 8)
+
+#define MXC_CCM_DCVR_ULV_MASK                   (0x3FF << 22)
+#define MXC_CCM_DCVR_ULV_OFFSET                 22
+#define MXC_CCM_DCVR_LLV_MASK                   (0x3FF << 12)
+#define MXC_CCM_DCVR_LLV_OFFSET                 12
+#define MXC_CCM_DCVR_ELV_MASK                   (0x3FF << 2)
+#define MXC_CCM_DCVR_ELV_OFFSET                 2
+
+#define MXC_CCM_PDR2_MST2_PDF_MASK              (0x3F << 7)
+#define MXC_CCM_PDR2_MST2_PDF_OFFSET            7
+#define MXC_CCM_PDR2_MST1_PDF_MASK              0x3F
+#define MXC_CCM_PDR2_MST1_PDF_OFFSET            0
+
+#define MXC_CCM_COSR_CLKOSEL_MASK               0x0F
+#define MXC_CCM_COSR_CLKOSEL_OFFSET             0
+#define MXC_CCM_COSR_CLKOUTDIV_MASK             (0x07 << 6)
+#define MXC_CCM_COSR_CLKOUTDIV_OFFSET           6
+#define MXC_CCM_COSR_CLKOEN                     (1 << 9)
+
+/*
+ * PMCR0 register offsets
+ */
+#define MXC_CCM_PMCR0_LBFL_OFFSET   20
+#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30
+#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31
+
+#endif				/* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
new file mode 100644
index 000000000000..dbe940d9c53a
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx31.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
+#define imx31_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
+#define imx31_add_imx2_wdt(pdata)       \
+	imx_add_imx2_wdt(&imx31_imx2_wdt_data)
+
+extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
+#define imx31_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
+#define imx31_add_imx_i2c0(pdata)	imx31_add_imx_i2c(0, pdata)
+#define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
+#define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
+#define imx31_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
+#define imx31_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
+#define imx31_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
+#define imx31_add_imx_uart0(pdata)	imx31_add_imx_uart(0, pdata)
+#define imx31_add_imx_uart1(pdata)	imx31_add_imx_uart(1, pdata)
+#define imx31_add_imx_uart2(pdata)	imx31_add_imx_uart(2, pdata)
+#define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
+#define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
+
+extern const struct imx_ipu_core_data imx31_ipu_core_data;
+#define imx31_add_ipu_core(pdata)	\
+	imx_add_ipu_core(&imx31_ipu_core_data, pdata)
+#define imx31_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
+#define imx31_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
+#define imx31_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
+#define imx31_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
+#define imx31_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
+
+extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
+#define imx31_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
+
+extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
+#define imx31_add_mxc_rtc(pdata)	\
+	imx_add_mxc_rtc(&imx31_mxc_rtc_data)
+
+extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
+#define imx31_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx31_mxc_w1_data)
+
+extern const struct imx_spi_imx_data imx31_cspi_data[];
+#define imx31_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
+#define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
+#define imx31_add_spi_imx1(pdata)	imx31_add_cspi(1, pdata)
+#define imx31_add_spi_imx2(pdata)	imx31_add_cspi(2, pdata)
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
new file mode 100644
index 000000000000..234cbd3c18af
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx35.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx35.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx35_fec_data;
+#define imx35_add_fec(pdata)	\
+	imx_add_fec(&imx35_fec_data, pdata)
+
+extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
+#define imx35_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_flexcan_data imx35_flexcan_data[];
+#define imx35_add_flexcan(id, pdata)	\
+	imx_add_flexcan(&imx35_flexcan_data[id], pdata)
+#define imx35_add_flexcan0(pdata)	imx35_add_flexcan(0, pdata)
+#define imx35_add_flexcan1(pdata)	imx35_add_flexcan(1, pdata)
+
+extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
+#define imx35_add_imx2_wdt(pdata)       \
+	imx_add_imx2_wdt(&imx35_imx2_wdt_data)
+
+extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
+#define imx35_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
+#define imx35_add_imx_i2c0(pdata)	imx35_add_imx_i2c(0, pdata)
+#define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
+#define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
+#define imx35_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
+#define imx35_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
+#define imx35_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
+#define imx35_add_imx_uart0(pdata)	imx35_add_imx_uart(0, pdata)
+#define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
+#define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
+
+extern const struct imx_ipu_core_data imx35_ipu_core_data;
+#define imx35_add_ipu_core(pdata)	\
+	imx_add_ipu_core(&imx35_ipu_core_data, pdata)
+#define imx35_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
+#define imx35_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
+#define imx35_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
+#define imx35_add_mxc_ehci_hs(pdata)	\
+	imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
+
+extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
+#define imx35_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
+
+extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
+#define imx35_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx35_mxc_w1_data)
+
+extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
+#define imx35_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx35_cspi_data[];
+#define imx35_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
+#define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
+#define imx35_add_spi_imx1(pdata)	imx35_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
new file mode 100644
index 000000000000..faad0f15ac7f
--- /dev/null
+++ b/arch/arm/mach-imx/ehci-imx31.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+int mx31_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H1_DT_BIT;
+
+		break;
+	case 2:	/* H2 port */
+		v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX31_H2_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX31_H2_DT_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
new file mode 100644
index 000000000000..001ec3971f5d
--- /dev/null
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+
+int mx35_initialize_usb_hw(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	switch (port) {
+	case 0:	/* OTG port */
+		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_OTG_PM_BIT;
+
+		break;
+	case 1: /* H1 port */
+		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+			MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
+
+		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+			v |= MX35_H1_PM_BIT;
+
+		if (!(flags & MXC_EHCI_TTL_ENABLED))
+			v |= MX35_H1_TLL_BIT;
+
+		if (flags & MXC_EHCI_INTERNAL_PHY)
+			v |= MX35_H1_USBTE_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_DOWN)
+			v |= MX35_H1_IPPUE_DOWN_BIT;
+
+		if (flags & MXC_EHCI_IPPUE_UP)
+			v |= MX35_H1_IPPUE_UP_BIT;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
new file mode 100644
index 000000000000..4909ea05855a
--- /dev/null
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -0,0 +1,303 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <video/platform_lcd.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/audmux.h>
+
+#include "devices-imx35.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		.name		= "CMO-QVGA",
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6500),
+		.left_margin	= 68,
+		.right_margin	= 20,
+		.upper_margin	= 15,
+		.lower_margin	= 4,
+		.hsync_len	= 30,
+		.vsync_len	= 3,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+	{
+		.name		= "DVI-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 32000,
+		.left_margin	= 100,
+		.right_margin	= 100,
+		.upper_margin	= 7,
+		.lower_margin	= 100,
+		.hsync_len	= 7,
+		.vsync_len	= 7,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+	{
+		.name		= "DVI-SVGA",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 25000,
+		.left_margin	= 75,
+		.right_margin	= 75,
+		.upper_margin	= 7,
+		.lower_margin	= 75,
+		.hsync_len	= 7,
+		.vsync_len	= 7,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+	.name		= "CMO-QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	/* Backlight */
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	/* LCD_PWR */
+	MX35_PAD_D3_CLS__GPIO1_4,
+	/* LED */
+	MX35_PAD_LD23__GPIO3_29,
+	/* SWITCH */
+	MX35_PAD_LD19__GPIO3_25,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* I2S */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+	/* CAN2 */
+	MX35_PAD_TX5_RX0__CAN2_TXCAN,
+	MX35_PAD_TX4_RX1__CAN2_RXCAN,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* SD1 CD */
+	MX35_PAD_LD18__GPIO3_24,
+};
+
+#define GPIO_LED1	IMX_GPIO_NR(3, 29)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
+#define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
+#define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_gpio = GPIO_SD1CD,
+	.wp_gpio = -EINVAL,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx35 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd35_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+	/* SSI unit master I2S codec connected to SSI_AUD4 */
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TFSDIR |
+			MXC_AUDMUX_V2_PTCR_TFSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR |
+			MXC_AUDMUX_V2_PTCR_TCSEL(3),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(3)
+	);
+	mxc_audmux_v2_configure_port(3,
+			MXC_AUDMUX_V2_PTCR_SYN,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+	);
+#endif
+
+	imx35_add_imx_uart1(&uart_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+	imx35_add_flexcan1(NULL);
+	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
+}
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
new file mode 100644
index 000000000000..cf8f8099ebd7
--- /dev/null
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_BASE	MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
+#define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
+#define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
+#define IOMUXGPR	(IOMUX_BASE + 0x008)
+#define IOMUXSW_MUX_CTL	(IOMUX_BASE + 0x00C)
+#define IOMUXSW_PAD_CTL	(IOMUX_BASE + 0x154)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int pin_mode)
+{
+	u32 field, l, mode, ret = 0;
+	void __iomem *reg;
+
+	reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
+	field = pin_mode & 0x3;
+	mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0xff << (field * 8));
+	l |= mode << (field * 8);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+	u32 field, l;
+	void __iomem *reg;
+
+	pin &= IOMUX_PADNUM_MASK;
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+	field = (pin + 2) % 3;
+
+	pr_debug("%s: reg offset = 0x%x, field = %d\n",
+			__func__, (pin + 2) / 3, field);
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+	if (pad >= (PIN_MAX + 1)) {
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+			pad, label ? label : "?");
+		return -EBUSY;
+	}
+	mxc_iomux_mode(pin);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
+		const char *label)
+{
+	const unsigned int *p = pin_list;
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(unsigned int pin)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+	if (pad < (PIN_MAX + 1))
+		clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
+{
+	const unsigned int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_release_pin(*p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
+{
+	u32 l;
+
+	spin_lock(&gpio_mux_lock);
+	l = __raw_readl(IOMUXGPR);
+	if (en)
+		l |= gp;
+	else
+		l &= ~gp;
+
+	__raw_writel(l, IOMUXGPR);
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_gpr);
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
new file mode 100644
index 000000000000..ffb40ff619b1
--- /dev/null
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -0,0 +1,565 @@
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx31.h"
+#include "crmregs-imx31.h"
+
+static int armadillo5x0_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	/* LAN9118_IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+	/* I2C2 */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+	/* OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/* USB host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
+};
+
+/* USB */
+
+#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
+#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
+#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbotg_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	/* Chip already enabled by hardware */
+	/* OTG phy reset*/
+	err = gpio_request(OTG_RESET, "USB-OTG-RESET");
+	if (err) {
+		pr_err("Failed to request the usb otg reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
+	if (err) {
+		pr_err("Failed to reset the usb otg phy\n");
+		goto otg_free_reset;
+	}
+
+	gpio_set_value(OTG_RESET, 0/*LOW*/);
+	mdelay(5);
+	gpio_set_value(OTG_RESET, 1/*HIGH*/);
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
+
+otg_free_reset:
+	gpio_free(OTG_RESET);
+	return err;
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+
+	/* Enable the chip */
+	err = gpio_request(USBH2_CS, "USB-H2-CS");
+	if (err) {
+		pr_err("Failed to request the usb host 2 CS gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
+	if (err) {
+		pr_err("Failed to drive the usb host 2 CS gpio\n");
+		goto h2_free_cs;
+	}
+
+	/* H2 phy reset*/
+	err = gpio_request(USBH2_RESET, "USB-H2-RESET");
+	if (err) {
+		pr_err("Failed to request the usb host 2 reset gpio\n");
+		goto h2_free_cs;
+	}
+
+	err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
+	if (err) {
+		pr_err("Failed to reset the usb host 2 phy\n");
+		goto h2_free_reset;
+	}
+
+	gpio_set_value(USBH2_RESET, 0/*LOW*/);
+	mdelay(5);
+	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_DIFF_UNI);
+
+h2_free_reset:
+	gpio_free(USBH2_RESET);
+h2_free_cs:
+	gpio_free(USBH2_CS);
+	return err;
+}
+
+static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
+	.init	= usbotg_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= usbh2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+};
+
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/* GPIO BUTTONS */
+static struct gpio_keys_button armadillo5x0_buttons[] = {
+	{
+		.code		= KEY_ENTER, /*28*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
+		.active_low	= 1,
+		.desc		= "menu",
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_BACK, /*158*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
+		.active_low	= 1,
+		.desc		= "back",
+		.wakeup		= 1,
+	}
+};
+
+static const struct gpio_keys_platform_data
+		armadillo5x0_button_data __initconst = {
+	.buttons	= armadillo5x0_buttons,
+	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
+};
+
+/*
+ * NAND Flash
+ */
+static const struct mxc_nand_platform_data
+armadillo5x0_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+	{
+		.name		= "nor.bootloader",
+		.offset		= 0x00000000,
+		.size		= 4*32*1024,
+	}, {
+		.name		= "nor.kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16*128*1024,
+	}, {
+		.name		= "nor.userland",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 110*128*1024,
+	}, {
+		.name		= "nor.config",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1*128*1024,
+	},
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+	.width		= 2,
+	.parts		= armadillo5x0_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= MX31_CS0_BASE_ADDR,
+	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= -1,
+	.num_resources		= 1,
+	.resource		= &armadillo5x0_nor_flash_resource,
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 640x480 @ 60 Hz */
+		.name		= "CRT-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 35,
+		.right_margin	= 115,
+		.upper_margin	= 43,
+		.lower_margin	= 1,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {/* 800x600 @ 56 Hz */
+		.name		= "CRT-SVGA",
+		.refresh	= 56,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 30000,
+		.left_margin	= 30,
+		.right_margin	= 108,
+		.upper_margin	= 13,
+		.lower_margin	= 10,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+	.name		= "CRT-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+				   irq_handler_t detect_irq, void *data)
+{
+	int ret;
+	int gpio_det, gpio_wp;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+	ret = gpio_request(gpio_det, "sdhc-card-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(gpio_det);
+
+	ret = gpio_request(gpio_wp, "sdhc-write-protect");
+	if (ret)
+		goto err_gpio_free;
+
+	gpio_direction_input(gpio_wp);
+
+	/* When supported the trigger type have to be BOTH */
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "sdhc-detect", data);
+
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(gpio_wp);
+
+err_gpio_free:
+	gpio_free(gpio_det);
+
+	return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
+	.get_ro = armadillo5x0_sdhc1_get_ro,
+	.init = armadillo5x0_sdhc1_init,
+	.exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+	{
+		.start	= MX31_CS3_BASE_ADDR,
+		.end	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_16BIT,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+	.resource       = armadillo5x0_smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* UART device data */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&armadillo5x0_smc911x_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx_add_gpio_keys(&armadillo5x0_button_data);
+	imx31_add_imx_i2c1(NULL);
+
+	/* Register UART */
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+
+	/* SMSC9118 IRQ pin */
+	gpio_direction_input(MX31_PIN_GPIO1_0);
+
+	/* Register SDHC */
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
+
+	/* Register FB */
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	/* Register NOR Flash */
+	mxc_register_device(&armadillo5x0_nor_flash,
+			    &armadillo5x0_nor_flash_pdata);
+
+	/* Register NAND Flash */
+	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
+
+	/* set NAND page size to 2k if not configured via boot mode pins */
+	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+	/* RTC */
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+		else
+			gpio_free(ARMADILLO5X0_RTC_GPIO);
+	}
+	if (armadillo5x0_i2c_rtc.irq == 0)
+		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
+
+	/* USB */
+
+	usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbotg_pdata.otg)
+		imx31_add_mxc_ehci_otg(&usbotg_pdata);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+	.init	= armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+	/* Maintainer: Alberto Panizzo  */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &armadillo5x0_timer,
+	.init_machine = armadillo5x0_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
new file mode 100644
index 000000000000..42e4f078a19c
--- /dev/null
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "devices-imx31.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const unsigned int bug_pins[] __initconst = {
+	MX31_PIN_PC_RST__CTS5,
+	MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5,
+	MX31_PIN_PC_BVD1__RXD5,
+};
+
+static void __init bug_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(bug_pins,
+				      ARRAY_SIZE(bug_pins), "uart-4");
+	imx31_add_imx_uart4(&uart_pdata);
+}
+
+static void __init bug_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer bug_timer = {
+	.init = bug_timer_init,
+};
+
+MACHINE_START(BUG, "BugLabs BUGBase")
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &bug_timer,
+	.init_machine = bug_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
new file mode 100644
index 000000000000..3f8ef825fa6f
--- /dev/null
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices-imx35.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxi2c_platform_data
+		eukrea_cpuimx35_i2c0_data __initconst = {
+	.bitrate =		100000,
+};
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+};
+
+#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
+static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
+		I2C_BOARD_INFO("tsc2007", 0x48),
+		.type		= "tsc2007",
+		.platform_data	= &tsc2007_info,
+		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+	},
+};
+
+static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* TSC2007 IRQ */
+	MX35_PAD_ATA_DA2__GPIO3_2,
+};
+
+static const struct mxc_nand_platform_data
+		eukrea_cpuimx35_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
+static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+	.init	= eukrea_cpuimx35_otg_init,
+	.portsc	= MXC_EHCI_MODE_UTMI,
+};
+
+static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= eukrea_cpuimx35_usbh1_init,
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+};
+
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI,
+	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx35_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init eukrea_cpuimx35_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
+			ARRAY_SIZE(eukrea_cpuimx35_pads));
+
+	imx35_add_fec(NULL);
+	imx35_add_imx2_wdt(NULL);
+
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
+			ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
+	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
+
+	if (otg_mode_host)
+		imx35_add_mxc_ehci_otg(&otg_pdata);
+	else
+		imx35_add_fsl_usb2_udc(&otg_device_pdata);
+
+	imx35_add_mxc_ehci_hs(&usbh1_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
+	eukrea_mbimxsd35_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx35_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer eukrea_cpuimx35_timer = {
+	.init	= eukrea_cpuimx35_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
+	/* Maintainer: Eukrea Electromatique */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &eukrea_cpuimx35_timer,
+	.init_machine = eukrea_cpuimx35_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
new file mode 100644
index 000000000000..1ecae20cf4e3
--- /dev/null
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -0,0 +1,278 @@
+/*
+ * KZM-ARM11-01 support
+ *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * based on code for MX31ADS,
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/memory.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices-imx31.h"
+
+#define KZM_ARM11_IO_ADDRESS(x) (IOMEM(					\
+	IMX_IO_P2V_MODULE(x, MX31_CS4) ?:				\
+	IMX_IO_P2V_MODULE(x, MX31_CS5)) ?:				\
+	MX31_IO_ADDRESS(x))
+
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*
+ * KZM-ARM11-01 has an external UART on FPGA
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
+		.mapbase	= KZM_ARM11_16550,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.irqflags	= IRQ_TYPE_EDGE_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 0,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_BUGGY_UART,
+	},
+	{},
+};
+
+static struct resource serial8250_resources[] = {
+	{
+		.start	= KZM_ARM11_16550,
+		.end	= KZM_ARM11_16550 + 0x10,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+				.platform_data = serial_platform_data,
+			  },
+	.num_resources	= ARRAY_SIZE(serial8250_resources),
+	.resource	= serial8250_resources,
+};
+
+static int __init kzm_init_ext_uart(void)
+{
+	u8 tmp;
+
+	/*
+	 * GPIO 1-1: external UART interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/*
+	 * Unmask UART interrupt
+	 */
+	tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp |= 0x2;
+	__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
+
+	return platform_device_register(&serial_device);
+}
+#else
+static inline int kzm_init_ext_uart(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * SMSC LAN9118
+ */
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct smsc911x_platform_config kzm_smsc9118_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct resource kzm_smsc9118_resources[] = {
+	{
+		.start	= MX31_CS5_BASE_ADDR,
+		.end	= MX31_CS5_BASE_ADDR + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device kzm_smsc9118_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kzm_smsc9118_resources),
+	.resource	= kzm_smsc9118_resources,
+	.dev		= {
+				.platform_data = &kzm_smsc9118_config,
+			  },
+};
+
+static int __init kzm_init_smsc9118(void)
+{
+	/*
+	 * GPIO 1-2: SMSC9118 interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
+	return platform_device_register(&kzm_smsc9118_device);
+}
+#else
+static inline int kzm_init_smsc9118(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init kzm_init_imx_uart(void)
+{
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+}
+#else
+static inline void kzm_init_imx_uart(void)
+{
+}
+#endif
+
+static int kzm_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_DCD_DCE1__DCD_DCE1,
+	MX31_PIN_RI_DCE1__RI_DCE1,
+	MX31_PIN_DSR_DCE1__DSR_DCE1,
+	MX31_PIN_DTR_DCE1__DTR_DCE1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_DCD_DTE1__DCD_DTE2,
+	MX31_PIN_RI_DTE1__RI_DTE2,
+	MX31_PIN_DSR_DTE1__DSR_DTE2,
+	MX31_PIN_DTR_DTE1__DTR_DTE2,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init kzm_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(kzm_pins,
+				      ARRAY_SIZE(kzm_pins), "kzm");
+	kzm_init_ext_uart();
+	kzm_init_smsc9118();
+	kzm_init_imx_uart();
+
+	pr_info("Clock input source is 26MHz\n");
+}
+
+/*
+ * This structure defines static mappings for the kzm-arm11-01 board.
+ */
+static struct map_desc kzm_io_desc[] __initdata = {
+	{
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length		= MX31_CS5_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init kzm_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
+}
+
+static void __init kzm_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer kzm_timer = {
+	.init = kzm_timer_init,
+};
+
+MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = kzm_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &kzm_timer,
+	.init_machine = kzm_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
new file mode 100644
index 000000000000..9b982449cb52
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -0,0 +1,771 @@
+/*
+ *  Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/l4f00242t03.h>
+#include <linux/regulator/machine.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/memblock.h>
+
+#include <media/soc_camera.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/3ds_debugboard.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx31.h"
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+static int mx31_3ds_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+	/*SPI0*/
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
+	/* MC13783 IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
+	/* USB OTG reset */
+	IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/*Keyboard*/
+	MX31_PIN_KEY_ROW0_KEY_ROW0,
+	MX31_PIN_KEY_ROW1_KEY_ROW1,
+	MX31_PIN_KEY_ROW2_KEY_ROW2,
+	MX31_PIN_KEY_COL0_KEY_COL0,
+	MX31_PIN_KEY_COL1_KEY_COL1,
+	MX31_PIN_KEY_COL2_KEY_COL2,
+	MX31_PIN_KEY_COL3_KEY_COL3,
+	/* USB Host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
+	/* USB Host2 reset */
+	IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
+	/* I2C1 */
+	MX31_PIN_I2C_CLK__I2C1_SCL,
+	MX31_PIN_I2C_DAT__I2C1_SDA,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
+	MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_CONTRAST__CONTRAST,
+	/* CSI */
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
+	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
+};
+
+/*
+ * Camera support
+ */
+static phys_addr_t mx3_camera_base __initdata;
+#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M
+
+#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1)
+
+static struct gpio mx31_3ds_camera_gpios[] = {
+	{ MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" },
+	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
+};
+
+static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
+	.flags = MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz = 2600,
+};
+
+static int __init mx31_3ds_init_camera(void)
+{
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev =
+		imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
+
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	if (!mx3_camera_base)
+		goto err;
+
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					mx3_camera_base, mx3_camera_base,
+					MX31_3DS_CAMERA_BUF_SIZE,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	if (!(dma & DMA_MEMORY_MAP))
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
+
+	return ret;
+}
+
+static int mx31_3ds_camera_power(struct device *dev, int on)
+{
+	/* enable or disable the camera */
+	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1);
+
+	if (!on)
+		goto out;
+
+	/* If enabled, give a reset impulse */
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0);
+	msleep(20);
+	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1);
+	msleep(100);
+
+out:
+	return 0;
+}
+
+static struct i2c_board_info mx31_3ds_i2c_camera = {
+	I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct regulator_bulk_data mx31_3ds_camera_regs[] = {
+	{ .supply = "cmos_vcore" },
+	{ .supply = "cmos_2v8" },
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+	.bus_id		= 0,
+	.board_info	= &mx31_3ds_i2c_camera,
+	.i2c_adapter_id	= 0,
+	.power		= mx31_3ds_camera_power,
+	.regulators	= mx31_3ds_camera_regs,
+	.num_regulators	= ARRAY_SIZE(mx31_3ds_camera_regs),
+};
+
+static struct platform_device mx31_3ds_ov2640 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_ov2640,
+	},
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 480x640 @ 60 Hz */
+		.name		= "Epson-VGA",
+		.refresh	= 60,
+		.xres		= 480,
+		.yres		= 640,
+		.pixclock	= 41701,
+		.left_margin	= 20,
+		.right_margin	= 41,
+		.upper_margin	= 10,
+		.lower_margin	= 5,
+		.hsync_len	= 20,
+		.vsync_len	= 10,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+	.name		= "Epson-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/* LCD */
+static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
+	.reset_gpio		= IOMUX_TO_GPIO(MX31_PIN_LCS1),
+	.data_enable_gpio	= IOMUX_TO_GPIO(MX31_PIN_SER_RS),
+	.core_supply		= "lcd_2v8",
+	.io_supply		= "vdd_lcdio",
+};
+
+/*
+ * Support for SD card slot in personality board
+ */
+#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static struct gpio mx31_3ds_sdhc1_gpios[] = {
+	{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
+	{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
+};
+
+static int mx31_3ds_sdhc1_init(struct device *dev,
+			       irq_handler_t detect_irq,
+			       void *data)
+{
+	int ret;
+
+	ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
+				 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+	if (ret) {
+		pr_warning("Unable to request the SD/MMC GPIOs.\n");
+		return ret;
+	}
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+			  detect_irq, IRQF_DISABLED |
+			  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			  "sdhc1-detect", data);
+	if (ret) {
+		pr_warning("Unable to request the SD/MMC card-detect IRQ.\n");
+		goto gpio_free;
+	}
+
+	return 0;
+
+gpio_free:
+	gpio_free_array(mx31_3ds_sdhc1_gpios,
+			ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+	return ret;
+}
+
+static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data);
+	gpio_free_array(mx31_3ds_sdhc1_gpios,
+			 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
+}
+
+static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
+{
+	/*
+	 * While the voltage stuff is done by the driver, activate the
+	 * Buffer Enable Pin only if there is a card in slot to fix the card
+	 * voltage issue caused by bi-directional chip TXB0108 on 3Stack.
+	 * Done here because at this stage we have for sure a debounced value
+	 * of the presence of the card, showed by the value of vdd.
+	 * 7 == ilog2(MMC_VDD_165_195)
+	 */
+	if (vdd > 7)
+		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
+	else
+		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init		= mx31_3ds_sdhc1_init,
+	.exit		= mx31_3ds_sdhc1_exit,
+	.setpower	= mx31_3ds_sdhc1_setpower,
+};
+
+/*
+ * Matrix keyboard
+ */
+
+static const uint32_t mx31_3ds_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+};
+
+static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
+	.keymap		= mx31_3ds_keymap,
+	.keymap_size	= ARRAY_SIZE(mx31_3ds_keymap),
+};
+
+/* Regulators */
+static struct regulator_init_data pwgtx_init = {
+	.constraints = {
+		.boot_on	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data gpo_init = {
+	.constraints = {
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_consumer_supply vmmc2_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"),
+};
+
+static struct regulator_init_data vmmc2_init = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
+	.consumer_supplies = vmmc2_consumers,
+};
+
+static struct regulator_consumer_supply vmmc1_consumers[] = {
+	REGULATOR_SUPPLY("lcd_2v8", NULL),
+	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vmmc1_init = {
+	.constraints = {
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
+	.consumer_supplies = vmmc1_consumers,
+};
+
+static struct regulator_consumer_supply vgen_consumers[] = {
+	REGULATOR_SUPPLY("vdd_lcdio", NULL),
+};
+
+static struct regulator_init_data vgen_init = {
+	.constraints = {
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
+	.consumer_supplies = vgen_consumers,
+};
+
+static struct regulator_consumer_supply vvib_consumers[] = {
+	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
+};
+
+static struct regulator_init_data vvib_init = {
+	.constraints = {
+		.min_uV = 1300000,
+		.max_uV = 1300000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
+	.consumer_supplies = vvib_consumers,
+};
+
+static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
+	{
+		.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
+		.init_data = &pwgtx_init,
+	}, {
+		.id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
+		.init_data = &pwgtx_init,
+	}, {
+
+		.id = MC13783_REG_GPO1, /* Turn on 1.8V */
+		.init_data = &gpo_init,
+	}, {
+		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
+		.init_data = &gpo_init,
+	}, {
+		.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
+		.init_data = &vmmc2_init,
+	}, {
+		.id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
+		.init_data = &vmmc1_init,
+	}, {
+		.id = MC13783_REG_VGEN,  /* Power LCD */
+		.init_data = &vgen_init,
+	}, {
+		.id = MC13783_REG_VVIB,  /* Power CMOS */
+		.init_data = &vvib_init,
+	},
+};
+
+/* MC13783 */
+static struct mc13xxx_platform_data mc13783_pdata = {
+	.regulators = {
+		.regulators = mx31_3ds_regulators,
+		.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+	},
+	.flags  = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
+};
+
+/* SPI */
+static int spi0_internal_chipselect[] = {
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi0_pdata __initconst = {
+	.chipselect	= spi0_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi0_internal_chipselect),
+};
+
+static int spi1_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi1_pdata __initconst = {
+	.chipselect	= spi1_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
+};
+
+static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
+	{
+		.modalias	= "mc13783",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 1, /* SS2 */
+		.platform_data	= &mc13783_pdata,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.mode = SPI_CS_HIGH,
+	}, {
+		.modalias	= "l4f00242t03",
+		.max_speed_hz	= 5000000,
+		.bus_num	= 0,
+		.chip_select	= 0, /* SS2 */
+		.platform_data	= &mx31_3ds_l4f00242t03_pdata,
+	},
+};
+
+/*
+ * NAND Flash
+ */
+static const struct mxc_nand_platform_data
+mx31_3ds_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+	.flash_bbt	= 1,
+#endif
+};
+
+/*
+ * USB OTG
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+		     PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
+#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
+
+static int mx31_3ds_usbotg_init(void)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	err = gpio_request(USBOTG_RST_B, "otgusb-reset");
+	if (err) {
+		pr_err("Failed to request the USB OTG reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBOTG_RST_B, 0);
+	if (err) {
+		pr_err("Failed to drive the USB OTG reset gpio\n");
+		goto usbotg_free_reset;
+	}
+
+	mdelay(1);
+	gpio_set_value(USBOTG_RST_B, 1);
+	return 0;
+
+usbotg_free_reset:
+	gpio_free(USBOTG_RST_B);
+	return err;
+}
+
+static int mx31_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
+static int mx31_3ds_host2_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
+
+	err = gpio_request(USBH2_RST_B, "usbh2-reset");
+	if (err) {
+		pr_err("Failed to request the USB Host 2 reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBH2_RST_B, 0);
+	if (err) {
+		pr_err("Failed to drive the USB Host 2 reset gpio\n");
+		goto usbotg_free_reset;
+	}
+
+	mdelay(1);
+	gpio_set_value(USBH2_RST_B, 1);
+
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+
+usbotg_free_reset:
+	gpio_free(USBH2_RST_B);
+	return err;
+}
+
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx31_3ds_otg_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init = mx31_3ds_host2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+};
+
+static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init mx31_3ds_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", mx31_3ds_otg_mode);
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx31_3ds_ov2640,
+};
+
+static void __init mx31_3ds_init(void)
+{
+	int ret;
+
+	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
+				      "mx31_3ds");
+
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
+
+	imx31_add_spi_imx1(&spi1_pdata);
+	spi_register_board_info(mx31_3ds_spi_devs,
+						ARRAY_SIZE(mx31_3ds_spi_devs));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
+
+	mx31_3ds_usbotg_init();
+	if (otg_mode_host) {
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx31_add_mxc_ehci_otg(&otg_pdata);
+	}
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+
+	if (!otg_mode_host)
+		imx31_add_fsl_usb2_udc(&usbotg_pdata);
+
+	if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debug board failed, all "
+				    "devices on the debug board are unusable.\n");
+	imx31_add_imx2_wdt(NULL);
+	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
+	imx31_add_mxc_mmc(0, &sdhc1_pdata);
+
+	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request_array(mx31_3ds_camera_gpios,
+				 ARRAY_SIZE(mx31_3ds_camera_gpios));
+	if (ret) {
+		pr_err("Failed to request camera gpios");
+		iclink_ov2640.power = NULL;
+	}
+
+	mx31_3ds_init_camera();
+}
+
+static void __init mx31_3ds_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31_3ds_timer = {
+	.init	= mx31_3ds_timer_init,
+};
+
+static void __init mx31_3ds_reserve(void)
+{
+	/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX31_3DS_CAMERA_BUF_SIZE,
+					 MX31_3DS_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE);
+}
+
+MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31_3ds_timer,
+	.init_machine = mx31_3ds_init,
+	.reserve = mx31_3ds_reserve,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
new file mode 100644
index 000000000000..f4dee0254634
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -0,0 +1,542 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
+#include <mach/iomux-mx3.h>
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
+#include "devices-imx31.h"
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS           0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+
+#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+/*
+ * The serial port definition structure.
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+		.irq      = EXPIO_INT_XUART_INTA,
+		.uartclk  = 14745600,
+		.regshift = 0,
+		.iotype   = UPIO_MEM,
+		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+	}, {
+		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+		.irq      = EXPIO_INT_XUART_INTB,
+		.uartclk  = 14745600,
+		.regshift = 0,
+		.iotype   = UPIO_MEM,
+		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+	},
+	{},
+};
+
+static struct platform_device serial_device = {
+	.name	= "serial8250",
+	.id	= 0,
+	.dev	= {
+		.platform_data = serial_platform_data,
+	},
+};
+
+static int __init mxc_init_extuart(void)
+{
+	return platform_device_register(&serial_device);
+}
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static unsigned int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
+	imx31_add_imx_uart0(&uart_pdata);
+}
+
+static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	u32 imr_val;
+	u32 int_valid;
+	u32 expio_irq;
+
+	imr_val = __raw_readw(PBC_INTMASK_SET_REG);
+	int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
+
+	expio_irq = MXC_EXP_IO_BASE;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		if ((int_valid & 1) == 0)
+			continue;
+
+		generic_handle_irq(expio_irq);
+	}
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param d	an expio virtual irq description
+ */
+static void expio_mask_irq(struct irq_data *d)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+	/* mask the interrupt */
+	__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
+	__raw_readw(PBC_INTMASK_CLEAR_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param d	an expio virtual irq description
+ */
+static void expio_ack_irq(struct irq_data *d)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+	/* clear the interrupt status */
+	__raw_writew(1 << expio, PBC_INTSTATUS_REG);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param d	an expio virtual irq description
+ */
+static void expio_unmask_irq(struct irq_data *d)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
+	/* unmask the interrupt */
+	__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.name = "EXPIO(CPLD)",
+	.irq_ack = expio_ack_irq,
+	.irq_mask = expio_mask_irq,
+	.irq_unmask = expio_unmask_irq,
+};
+
+static void __init mx31ads_init_expio(void)
+{
+	int i;
+
+	printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+
+	/* disable the interrupt and clear the status */
+	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
+	__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
+	for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+	     i++) {
+		irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
+	irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+}
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+/* This section defines setup for the Wolfson Microelectronics
+ * 1133-EV1 PMU/audio board.  When other PMU boards are supported the
+ * regulator definitions may be shared with them, but for now they can
+ * only be used with this board so would generate warnings about
+ * unused statics and some of the configuration is specific to this
+ * module.
+ */
+
+/* CPU */
+static struct regulator_consumer_supply sw1a_consumers[] = {
+	{
+		.supply = "cpu_vcc",
+	}
+};
+
+static struct regulator_init_data sw1a_data = {
+	.constraints = {
+		.name = "SW1A",
+		.min_uV = 1275000,
+		.max_uV = 1600000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_MODE,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+				    REGULATOR_MODE_FAST,
+		.state_mem = {
+			 .uV = 1400000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
+	.consumer_supplies = sw1a_consumers,
+};
+
+/* System IO - High */
+static struct regulator_init_data viohi_data = {
+	.constraints = {
+		.name = "VIOHO",
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.state_mem = {
+			 .uV = 2800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* System IO - Low */
+static struct regulator_init_data violo_data = {
+	.constraints = {
+		.name = "VIOLO",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* DDR RAM */
+static struct regulator_init_data sw2a_data = {
+	.constraints = {
+		.name = "SW2A",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.state_disk = {
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 0,
+		 },
+		.always_on = 1,
+		.boot_on = 1,
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+static struct regulator_init_data ldo1_data = {
+	.constraints = {
+		.name = "VCAM/VMMC1/VMMC2",
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.apply_uV = 1,
+	},
+};
+
+static struct regulator_consumer_supply ldo2_consumers[] = {
+	{ .supply = "AVDD", .dev_name = "1-001a" },
+	{ .supply = "HPVDD", .dev_name = "1-001a" },
+};
+
+/* CODEC and SIM */
+static struct regulator_init_data ldo2_data = {
+	.constraints = {
+		.name = "VESIM/VSIM/AVDD",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.apply_uV = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
+	.consumer_supplies = ldo2_consumers,
+};
+
+/* General */
+static struct regulator_init_data vdig_data = {
+	.constraints = {
+		.name = "VDIG",
+		.min_uV = 1500000,
+		.max_uV = 1500000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* Tranceivers */
+static struct regulator_init_data ldo4_data = {
+	.constraints = {
+		.name = "VRF1/CVDD_2.775",
+		.min_uV = 2500000,
+		.max_uV = 2500000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+static struct wm8350_led_platform_data wm8350_led_data = {
+	.name            = "wm8350:white",
+	.default_trigger = "heartbeat",
+	.max_uA          = 27899,
+};
+
+static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
+	.vmid_discharge_msecs = 1000,
+	.drain_msecs = 30,
+	.cap_discharge_msecs = 700,
+	.vmid_charge_msecs = 700,
+	.vmid_s_curve = WM8350_S_CURVE_SLOW,
+	.dis_out4 = WM8350_DISCHARGE_SLOW,
+	.dis_out3 = WM8350_DISCHARGE_SLOW,
+	.dis_out2 = WM8350_DISCHARGE_SLOW,
+	.dis_out1 = WM8350_DISCHARGE_SLOW,
+	.vroi_out4 = WM8350_TIE_OFF_500R,
+	.vroi_out3 = WM8350_TIE_OFF_500R,
+	.vroi_out2 = WM8350_TIE_OFF_500R,
+	.vroi_out1 = WM8350_TIE_OFF_500R,
+	.vroi_enable = 0,
+	.codec_current_on = WM8350_CODEC_ISEL_1_0,
+	.codec_current_standby = WM8350_CODEC_ISEL_0_5,
+	.codec_current_charge = WM8350_CODEC_ISEL_1_5,
+};
+
+static int mx31_wm8350_init(struct wm8350 *wm8350)
+{
+	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_ON);
+
+	wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_ON);
+
+	wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
+
+	/* LEDs */
+	wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
+			     WM8350_DC5_ERRACT_SHUTDOWN_CONV);
+	wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
+			       WM8350_ISINK_FLASH_DISABLE,
+			       WM8350_ISINK_FLASH_TRIG_BIT,
+			       WM8350_ISINK_FLASH_DUR_32MS,
+			       WM8350_ISINK_FLASH_ON_INSTANT,
+			       WM8350_ISINK_FLASH_OFF_INSTANT,
+			       WM8350_ISINK_FLASH_MODE_EN);
+	wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
+			       WM8350_ISINK_MODE_BOOST,
+			       WM8350_ISINK_ILIM_NORMAL,
+			       WM8350_DC5_RMP_20V,
+			       WM8350_DC5_FBSRC_ISINKA);
+	wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
+			    &wm8350_led_data);
+
+	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+
+	regulator_has_full_constraints();
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
+	.init = mx31_wm8350_init,
+	.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
+};
+#endif
+
+static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+	{
+		I2C_BOARD_INFO("wm8350", 0x1a),
+		.platform_data = &mx31_wm8350_pdata,
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+	},
+#endif
+};
+
+static void mxc_init_i2c(void)
+{
+	i2c_register_board_info(1, mx31ads_i2c1_devices,
+				ARRAY_SIZE(mx31ads_i2c1_devices));
+
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
+
+	imx31_add_imx_i2c1(NULL);
+}
+
+static unsigned int ssi_pins[] = {
+	MX31_PIN_SFS5__SFS5,
+	MX31_PIN_SCK5__SCK5,
+	MX31_PIN_SRXD5__SRXD5,
+	MX31_PIN_STXD5__STXD5,
+};
+
+static void mxc_init_audio(void)
+{
+	imx31_add_imx_ssi(0, NULL);
+	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
+}
+
+/* static mappings */
+static struct map_desc mx31ads_io_desc[] __initdata = {
+	{
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE / 2,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init mx31ads_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
+}
+
+static void __init mx31ads_init_irq(void)
+{
+	mx31_init_irq();
+	mx31ads_init_expio();
+}
+
+static void __init mx31ads_init(void)
+{
+	mxc_init_extuart();
+	mxc_init_imx_uart();
+	mxc_init_i2c();
+	mxc_init_audio();
+}
+
+static void __init mx31ads_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31ads_timer = {
+	.init	= mx31ads_timer_init,
+};
+
+MACHINE_START(MX31ADS, "Freescale MX31ADS")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31ads_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31ads_init_irq,
+	.timer = &mx31ads_timer,
+	.init_machine = mx31ads_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
new file mode 100644
index 000000000000..410e676ae087
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -0,0 +1,302 @@
+/*
+ *  LILLY-1131 module support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx31.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+	{
+		.start	= MX31_CS4_BASE_ADDR,
+		.end	= MX31_CS4_BASE_ADDR + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT |
+			  SMSC911X_SAVE_MAC_ADDRESS |
+			  SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc91x_resources),
+	.resource	= smsc91x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	}
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+/* USB */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh1_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+		MX31_PIN_CSPI1_MISO__USBH1_RXDP,
+		MX31_PIN_CSPI1_SS0__USBH1_TXDM,
+		MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+		MX31_PIN_CSPI1_SS2__USBH1_RCV,
+		MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+		MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= usbh1_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= usbh2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+};
+
+static void lilly1131_usb_init(void)
+{
+	imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+}
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi0_pdata __initconst = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static const struct spi_imx_master spi1_pdata __initconst = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
+	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info mc13783_dev __initdata = {
+	.modalias	= "mc13783",
+	.max_speed_hz	= 1000000,
+	.bus_num	= 1,
+	.chip_select	= 0,
+	.platform_data	= &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+	switch (mx31lilly_baseboard) {
+	case MX31LILLY_NOBOARD:
+		break;
+	case MX31LILLY_DB:
+		mx31lilly_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+			mx31lilly_baseboard);
+	}
+
+	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+
+	/* SPI */
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
+
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
+
+	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
+	spi_register_board_info(&mc13783_dev, 1);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* USB */
+	lilly1131_usb_init();
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+	.init	= mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31lilly_timer,
+	.init_machine = mx31lilly_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
new file mode 100644
index 000000000000..ac9b4cad320e
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -0,0 +1,287 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/board-mx31lite.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx31.h"
+
+/*
+ * This file contains the module-specific initialization routines.
+ */
+
+static unsigned int mx31lite_pins[] = {
+	/* LAN9117 IRQ pin */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS1__SS1,
+	MX31_PIN_CSPI2_SS2__SS2,
+};
+
+static const struct mxc_nand_platform_data
+mx31lite_nand_board_info __initconst  = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+	{
+		.start		= MX31_CS4_BASE_ADDR,
+		.end		= MX31_CS4_BASE_ADDR + 0x100,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+/*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+};
+
+static const struct spi_imx_master spi1_pdata __initconst = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
+	.flags  = MC13XXX_USE_RTC |
+		  MC13XXX_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+	.modalias       = "mc13783",
+	.max_speed_hz   = 1000000,
+	.bus_num	= 1,
+	.chip_select    = 0,
+	.platform_data  = &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+/*
+ * USB
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init   = usbh2_init,
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start  = 0xa0000000,
+	.end    = 0xa1ffffff,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name   = "physmap-flash",
+	.id     = 0,
+	.dev    = {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31lite_io_desc[] __initdata = {
+	{
+		.virtual = MX31_CS4_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length = MX31_CS4_SIZE,
+		.type = MT_DEVICE
+	}
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init mx31lite_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
+}
+
+static int mx31lite_baseboard;
+core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
+
+static void __init mx31lite_init(void)
+{
+	int ret;
+
+	switch (mx31lite_baseboard) {
+	case MX31LITE_NOBOARD:
+		break;
+	case MX31LITE_DB:
+		mx31lite_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
+				mx31lite_baseboard);
+	}
+
+	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+				      "mx31lite");
+
+	/* NOR and NAND flash */
+	platform_device_register(&physmap_flash_device);
+	imx31_add_mxc_nand(&mx31lite_nand_board_info);
+
+	imx31_add_spi_imx1(&spi1_pdata);
+	spi_register_board_info(&mc13783_spi_dev, 1);
+
+	/* USB */
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+
+	/* SMSC9117 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+		platform_device_register(&smsc911x_device);
+	}
+}
+
+static void __init mx31lite_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+struct sys_timer mx31lite_timer = {
+	.init	= mx31lite_timer_init,
+};
+
+MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31lite_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31lite_timer,
+	.init_machine = mx31lite_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
new file mode 100644
index 000000000000..eaa51e49ca95
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -0,0 +1,583 @@
+/*
+ *  Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include <linux/memblock.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx3.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx31.h"
+
+static unsigned int moboard_pins[] = {
+	/* UART0 */
+	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS1__GPIO2_7,
+	/* UART4 */
+	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+	/* I2C0 */
+	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+	/* I2C1 */
+	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+	/* USB reset */
+	MX31_PIN_GPIO1_0__GPIO1_0,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+	/* USB H2 */
+	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
+	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
+	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
+	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
+	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
+	MX31_PIN_SCK6__GPIO1_25,
+	/* LEDs */
+	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+	/* SPI1 */
+	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
+	/* Atlas IRQ */
+	MX31_PIN_GPIO1_3__GPIO1_3,
+	/* SPI2 */
+	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
+	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
+};
+
+static struct physmap_flash_data mx31moboard_flash_data = {
+	.width	= 2,
+};
+
+static struct resource mx31moboard_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mx31moboard_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &mx31moboard_flash_data,
+	},
+	.resource = &mx31moboard_flash_resource,
+	.num_resources = 1,
+};
+
+static int moboard_uart0_init(struct platform_device *pdev)
+{
+	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	if (ret)
+		return ret;
+
+	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	if (ret)
+		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+
+	return ret;
+}
+
+static void moboard_uart0_exit(struct platform_device *pdev)
+{
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+}
+
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+	.init = moboard_uart0_init,
+	.exit = moboard_uart0_exit,
+};
+
+static const struct imxuart_platform_data uart4_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
+	.bitrate = 400000,
+};
+
+static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
+	.bitrate = 100000,
+};
+
+static int moboard_spi1_cs[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master moboard_spi1_pdata __initconst = {
+	.chipselect	= moboard_spi1_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
+};
+
+static struct regulator_consumer_supply sdhc_consumers[] = {
+	{
+		.dev_name = "mxc-mmc.0",
+		.supply	= "sdhc0_vcc",
+	},
+	{
+		.dev_name = "mxc-mmc.1",
+		.supply	= "sdhc1_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
+	.consumer_supplies = sdhc_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev_name = "mx3_camera.0",
+		.supply = "cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+static struct mc13xxx_regulator_init_data moboard_regulators[] = {
+	{
+		.id = MC13783_REG_VMMC1,
+		.init_data = &sdhc_vreg_data,
+	},
+	{
+		.id = MC13783_REG_VCAM,
+		.init_data = &cam_vreg_data,
+	},
+};
+
+static struct mc13783_led_platform_data moboard_led[] = {
+	{
+		.id = MC13783_LED_R1,
+		.name = "coreboard-led-4:red",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_G1,
+		.name = "coreboard-led-4:green",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_B1,
+		.name = "coreboard-led-4:blue",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_R2,
+		.name = "coreboard-led-5:red",
+		.max_current = 3,
+	},
+	{
+		.id = MC13783_LED_G2,
+		.name = "coreboard-led-5:green",
+		.max_current = 3,
+	},
+	{
+		.id = MC13783_LED_B2,
+		.name = "coreboard-led-5:blue",
+		.max_current = 3,
+	},
+};
+
+static struct mc13783_leds_platform_data moboard_leds = {
+	.num_leds = ARRAY_SIZE(moboard_led),
+	.led = moboard_led,
+	.flags = MC13783_LED_SLEWLIMTC,
+	.abmode = MC13783_LED_AB_DISABLED,
+	.tc1_period = MC13783_LED_PERIOD_10MS,
+	.tc2_period = MC13783_LED_PERIOD_10MS,
+};
+
+static struct mc13xxx_platform_data moboard_pmic = {
+	.regulators = {
+		.regulators = moboard_regulators,
+		.num_regulators = ARRAY_SIZE(moboard_regulators),
+	},
+	.leds = &moboard_leds,
+	.flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC |
+		MC13XXX_USE_ADC | MC13XXX_USE_LED,
+};
+
+static struct spi_board_info moboard_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.platform_data = &moboard_pmic,
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+static int moboard_spi2_cs[] = {
+	MXC_SPI_CS(1),
+};
+
+static const struct spi_imx_master moboard_spi2_pdata __initconst = {
+	.chipselect	= moboard_spi2_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
+};
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+	return !gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC1_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_CD);
+
+	ret = gpio_request(SDHC1_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc1-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC1_WP);
+err_gpio_free:
+	gpio_free(SDHC1_CD);
+
+	return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC1_CD), data);
+	gpio_free(SDHC1_WP);
+	gpio_free(SDHC1_CD);
+}
+
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
+	.get_ro	= moboard_sdhc1_get_ro,
+	.init	= moboard_sdhc1_init,
+	.exit	= moboard_sdhc1_exit,
+};
+
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+		      PAD_CTL_ODE_CMOS)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static void usb_xcvr_reset(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+	gpio_request(USBH2_EN_B, "usbh2-en");
+	gpio_direction_output(USBH2_EN_B, 0);
+
+	gpio_request(USB_RESET_B, "usb-reset");
+	gpio_direction_output(USB_RESET_B, 0);
+	mdelay(1);
+	gpio_set_value(USB_RESET_B, 1);
+	mdelay(1);
+}
+
+static int moboard_usbh2_init_hw(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= moboard_usbh2_init_hw,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+};
+
+static int __init moboard_usbh2_init(void)
+{
+	struct platform_device *pdev;
+
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (!usbh2_pdata.otg)
+		return -ENODEV;
+
+	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+
+static struct gpio_led mx31moboard_leds[] = {
+	{
+		.name	= "coreboard-led-0:red:running",
+		.default_trigger = "heartbeat",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+	}, {
+		.name	= "coreboard-led-1:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
+	}, {
+		.name	= "coreboard-led-2:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
+	}, {
+		.name	= "coreboard-led-3:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+	},
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+	.num_leds	= ARRAY_SIZE(mx31moboard_leds),
+	.leds		= mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mx31moboard_led_pdata,
+	},
+};
+
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx31moboard_flash,
+	&mx31moboard_leds_device,
+};
+
+static struct mx3_camera_pdata camera_pdata __initdata = {
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 4800,
+};
+
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
+
+static int __init mx31moboard_init_cam(void)
+{
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev;
+
+	imx31_add_ipu_core(&mx3_ipu_data);
+
+	pdev = imx31_alloc_mx3_camera(&camera_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					mx3_camera_base, mx3_camera_base,
+					MX3_CAMERA_BUF_SIZE,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
+
+	return ret;
+
+}
+
+static int mx31moboard_baseboard;
+core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
+
+/*
+ * Board specific initialization.
+ */
+static void __init mx31moboard_init(void)
+{
+	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+		"moboard");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx31_add_imx_uart0(&uart0_pdata);
+	imx31_add_imx_uart4(&uart4_pdata);
+
+	imx31_add_imx_i2c0(&moboard_i2c0_data);
+	imx31_add_imx_i2c1(&moboard_i2c1_data);
+
+	imx31_add_spi_imx1(&moboard_spi1_pdata);
+	imx31_add_spi_imx2(&moboard_spi2_pdata);
+
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(moboard_spi_board_info,
+		ARRAY_SIZE(moboard_spi_board_info));
+
+	imx31_add_mxc_mmc(0, &sdhc1_pdata);
+
+	mx31moboard_init_cam();
+
+	usb_xcvr_reset();
+
+	moboard_usbh2_init();
+
+	switch (mx31moboard_baseboard) {
+	case MX31NOBOARD:
+		break;
+	case MX31DEVBOARD:
+		mx31moboard_devboard_init();
+		break;
+	case MX31MARXBOT:
+		mx31moboard_marxbot_init();
+		break;
+	case MX31SMARTBOT:
+	case MX31EYEBOT:
+		mx31moboard_smartbot_init(mx31moboard_baseboard);
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+			mx31moboard_baseboard);
+	}
+}
+
+static void __init mx31moboard_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+struct sys_timer mx31moboard_timer = {
+	.init	= mx31moboard_timer_init,
+};
+
+static void __init mx31moboard_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
+MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
+	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.reserve = mx31moboard_reserve,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &mx31moboard_timer,
+	.init_machine = mx31moboard_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
new file mode 100644
index 000000000000..882880ac1bbc
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX35 3-Stack Development System
+ *  - i.MX35 Platform Development Kit (i.MX35 PDK)
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+#include <mach/3ds_debugboard.h>
+
+#include "devices-imx35.h"
+
+#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct physmap_flash_data mx35pdk_flash_data = {
+	.width  = 2,
+};
+
+static struct resource mx35pdk_flash_resource = {
+	.start	= MX35_CS0_BASE_ADDR,
+	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mx35pdk_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &mx35pdk_flash_data,
+	},
+	.resource = &mx35pdk_flash_resource,
+	.num_resources = 1,
+};
+
+static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+	.flash_bbt = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx35pdk_flash,
+};
+
+static iomux_v3_cfg_t mx35pdk_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+	/* USBH1 */
+	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+};
+
+static int mx35_3ds_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
+/* OTG config */
+static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
+/*
+ * ENGCM09152 also requires a hardware change.
+ * Please check the MX35 Chip Errata document for details.
+ */
+};
+
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= mx35_3ds_otg_init,
+	.portsc	= MXC_EHCI_MODE_UTMI,
+};
+
+static int mx35_3ds_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			  MXC_EHCI_INTERNAL_PHY);
+}
+
+/* USB HOST config */
+static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+	.init		= mx35_3ds_usbh_init,
+	.portsc		= MXC_EHCI_MODE_SERIAL,
+};
+
+static int otg_mode_host;
+
+static int __init mx35_3ds_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", mx35_3ds_otg_mode);
+
+static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mx35_3ds_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+	imx35_add_fec(NULL);
+	imx35_add_imx2_wdt(NULL);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx35_add_imx_uart0(&uart_pdata);
+
+	if (otg_mode_host)
+		imx35_add_mxc_ehci_otg(&otg_pdata);
+
+	imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+	if (!otg_mode_host)
+		imx35_add_fsl_usb2_udc(&usb_otg_pdata);
+
+	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
+
+	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		pr_warn("Init of the debugboard failed, all "
+				"devices on the debugboard are unusable.\n");
+	imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+	.init	= mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+	/* Maintainer: Freescale Semiconductor, Inc */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &mx35pdk_timer,
+	.init_machine = mx35_3ds_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
new file mode 100644
index 000000000000..89c213b81295
--- /dev/null
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -0,0 +1,696 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/can/platform/sja1000.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/gfp.h>
+#include <linux/memblock.h>
+
+#include <media/soc_camera.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx3.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx31.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+	if (!strcmp("eet", str))
+		pcm037_instance = PCM037_EET;
+	else if (strcmp("pcm970", str))
+		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+	return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+	return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+static unsigned int pcm037_pins[] = {
+	/* I2C */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+	MX31_PIN_CSPI2_SS2__I2C3_SDA,
+	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+	/* SPI1 */
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+	/* UART2 */
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	/* UART3 */
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	/* LAN9217 irq pin */
+	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+	/* Onewire */
+	MX31_PIN_BATT_LINE__OWIRE,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_D3_REV__D3_REV,
+	MX31_PIN_CONTRAST__CONTRAST,
+	MX31_PIN_D3_SPL__D3_SPL,
+	MX31_PIN_D3_CLS__D3_CLS,
+	MX31_PIN_LCS0__GPI03_23,
+	/* CSI */
+	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	/* GPIO */
+	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
+	/* OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/* USB host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
+};
+
+static struct physmap_flash_data pcm037_flash_data = {
+	.width  = 2,
+};
+
+static struct resource pcm037_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &pcm037_flash_data,
+	},
+	.resource = &pcm037_flash_resource,
+	.num_resources = 1,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct resource smsc911x_resources[] = {
+	{
+		.start		= MX31_CS1_BASE_ADDR + 0x300,
+		.end		= MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
+			  SMSC911X_SAVE_MAC_ADDRESS,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device pcm037_eth = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+	.bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+	.start = MX31_CS4_BASE_ADDR,
+	.end   = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_sram_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_sram_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_sram_resource,
+};
+
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
+	.bitrate = 100000,
+};
+
+static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
+	.bitrate = 20000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static int pcm037_camera_power(struct device *dev, int on)
+{
+	/* disable or enable the camera in X7 or X8 PCM970 connector */
+	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+	return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_camera[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	}, {
+		I2C_BOARD_INFO("mt9v022", 0x48),
+	},
+};
+
+static struct soc_camera_link iclink_mt9v022 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm037_i2c_camera[1],
+	.i2c_adapter_id	= 2,
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= pcm037_camera_power,
+	.board_info	= &pcm037_i2c_camera[0],
+	.i2c_adapter_id	= 2,
+};
+
+static struct i2c_board_info pcm037_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}
+};
+
+static struct platform_device pcm037_mt9t031 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_mt9t031,
+	},
+};
+
+static struct platform_device pcm037_mt9v022 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &iclink_mt9v022,
+	},
+};
+
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP	IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET	IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+	ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+				"sdhc-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+	gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+	gpio_free(SDHC1_GPIO_DET);
+
+	return ret;
+}
+
+static void pcm970_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+	gpio_free(SDHC1_GPIO_DET);
+	gpio_free(SDHC1_GPIO_WP);
+}
+
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
+#ifdef PCM970_SDHC_RW_SWITCH
+	.get_ro = pcm970_sdhc1_get_ro,
+#endif
+	.init = pcm970_sdhc1_init,
+	.exit = pcm970_sdhc1_exit,
+};
+
+struct mx3_camera_pdata camera_pdata __initdata = {
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2000,
+};
+
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
+
+static int __init pcm037_init_camera(void)
+{
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata);
+
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					mx3_camera_base, mx3_camera_base,
+					MX3_CAMERA_BUF_SIZE,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
+
+	return ret;
+}
+
+static struct platform_device *devices[] __initdata = {
+	&pcm037_flash,
+	&pcm037_sram_device,
+	&pcm037_mt9t031,
+	&pcm037_mt9v022,
+};
+
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz Sharp */
+		.name		= "Sharp-LQ035Q7DH06-QVGA",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+				  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "CMEL-OLED",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.name		= "Sharp-LQ035Q7DH06-QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = MX31_CS5_BASE_ADDR,
+		.end     = MX31_CS5_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.osc_freq	= 16000000,
+	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
+	.cdr		= CDR_CBP,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
+static int pcm037_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= pcm037_otg_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+};
+
+static int pcm037_usbh2_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= pcm037_usbh2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+};
+
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm037_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pcm037_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init pcm037_init(void)
+{
+	int ret;
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
+
+	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+			"pcm037");
+
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+		| PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG);	/* USBH2_DATA2 */
+	mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG);	/* USBH2_DATA3 */
+	mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG);	/* USBH2_DATA4 */
+	mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG);	/* USBH2_DATA5 */
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG);	/* USBH2_DATA6 */
+	mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG);	/* USBH2_DATA7 */
+
+	if (pcm037_variant() == PCM037_EET)
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+	else
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+			ARRAY_SIZE(pcm037_uart1_handshake_pins),
+			"pcm037_uart1");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx31_add_imx2_wdt(NULL);
+	imx31_add_imx_uart0(&uart_pdata);
+	/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
+
+	imx31_add_mxc_w1(NULL);
+
+	/* LAN9217 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		platform_device_register(&pcm037_eth);
+	}
+
+
+	/* I2C adapters and devices */
+	i2c_register_board_info(1, pcm037_i2c_devices,
+			ARRAY_SIZE(pcm037_i2c_devices));
+
+	imx31_add_imx_i2c1(&pcm037_i2c1_data);
+	imx31_add_imx_i2c2(&pcm037_i2c2_data);
+
+	imx31_add_mxc_nand(&pcm037_nand_board_info);
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink_mt9t031.power = NULL;
+
+	pcm037_init_camera();
+
+	platform_device_register(&pcm970_sja1000);
+
+	if (otg_mode_host) {
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx31_add_mxc_ehci_otg(&otg_pdata);
+	}
+
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+
+	if (!otg_mode_host)
+		imx31_add_fsl_usb2_udc(&otg_device_pdata);
+
+}
+
+static void __init pcm037_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+struct sys_timer pcm037_timer = {
+	.init	= pcm037_timer_init,
+};
+
+static void __init pcm037_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
+MACHINE_START(PCM037, "Phytec Phycore pcm037")
+	/* Maintainer: Pengutronix */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.reserve = pcm037_reserve,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &pcm037_timer,
+	.init_machine = pcm037_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
new file mode 100644
index 000000000000..1b7606bef8f4
--- /dev/null
+++ b/arch/arm/mach-imx/mach-pcm037_eet.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices-imx31.h"
+
+static unsigned int pcm037_eet_pins[] = {
+	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+	/* GPIO keys */
+	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
+	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
+	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
+	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
+	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
+	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
+	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
+	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
+	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
+	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
+
+	/* LEDs */
+	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
+	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
+	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
+	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+	{
+		.modalias	= "dac124s085",
+		.max_speed_hz	= 400000,
+		.bus_num	= 0,
+		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
+		.mode		= SPI_CPHA,
+	},
+};
+
+/* Platform Data for MXC CSPI */
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
+	.chipselect = pcm037_spi1_cs,
+	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_L,
+		.gpio	= 0,
+		.desc	= "Wheel Manual",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_A,
+		.gpio	= 1,
+		.desc	= "Wheel AF",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_V,
+		.gpio	= 2,
+		.desc	= "Wheel View",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_M,
+		.gpio	= 3,
+		.desc	= "Wheel Menu",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_UP,
+		.gpio	= 32,
+		.desc	= "Nav Pad Up",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_RIGHT,
+		.gpio	= 33,
+		.desc	= "Nav Pad Right",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_DOWN,
+		.gpio	= 34,
+		.desc	= "Nav Pad Down",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_LEFT,
+		.gpio	= 35,
+		.desc	= "Nav Pad Left",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_ENTER,
+		.gpio	= 38,
+		.desc	= "Nav Pad Ok",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_O,
+		.gpio	= 39,
+		.desc	= "Wheel Off",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_FORWARD,
+		.gpio	= 50,
+		.desc	= "Focus Forward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_BACK,
+		.gpio	= 51,
+		.desc	= "Focus Backward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_MIDDLE,
+		.gpio	= 52,
+		.desc	= "Release Half",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_EXTRA,
+		.gpio	= 53,
+		.desc	= "Release Full",
+		.wakeup	= 0,
+	},
+};
+
+static const struct gpio_keys_platform_data
+		pcm037_gpio_keys_platform_data __initconst = {
+	.buttons	= pcm037_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
+	.rep		= 0, /* No auto-repeat */
+};
+
+static int __init eet_init_devices(void)
+{
+	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+		return 0;
+
+	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+	/* SPI */
+	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+	imx31_add_spi_imx0(&pcm037_spi1_pdata);
+
+	imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
+
+	return 0;
+}
+late_initcall(eet_init_devices);
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
new file mode 100644
index 000000000000..026441628dfa
--- /dev/null
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -0,0 +1,423 @@
+/*
+ *  Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/ulpi.h>
+#include <mach/audmux.h>
+
+#include "devices-imx35.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz */
+		.name		= "Sharp-LQ035Q7",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+	.name		= "Sharp-LQ035Q7",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+	.width  = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &pcm043_flash_data,
+	},
+	.resource = &pcm043_flash_resource,
+	.num_resources = 1,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
+	.bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&pcm043_flash,
+};
+
+static iomux_v3_cfg_t pcm043_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* Display */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+	/* gpio */
+	MX35_PAD_ATA_CS0__GPIO2_6,
+	/* USB host */
+	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+	/* SSI */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+	/* CAN2 */
+	MX35_PAD_TX5_RX0__CAN2_TXCAN,
+	MX35_PAD_TX4_RX1__CAN2_RXCAN,
+	/* esdhc */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
+	MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
+};
+
+#define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
+#define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
+#define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_WP	IMX_GPIO_NR(2, 23)
+#define SD1_GPIO_CD	IMX_GPIO_NR(2, 24)
+
+static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret) {
+		printk("failed to get GPIO_TXFS: %d\n", ret);
+		return;
+	}
+
+	mxc_iomux_v3_setup_pad(txfs_gpio);
+
+	/* warm reset */
+	gpio_direction_output(AC97_GPIO_TXFS, 1);
+	udelay(2);
+	gpio_set_value(AC97_GPIO_TXFS, 0);
+
+	gpio_free(AC97_GPIO_TXFS);
+	mxc_iomux_v3_setup_pad(txfs);
+}
+
+static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+	iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+	iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret)
+		goto err1;
+
+	ret = gpio_request(AC97_GPIO_TXD, "SSI");
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(AC97_GPIO_RESET, "SSI");
+	if (ret)
+		goto err3;
+
+	mxc_iomux_v3_setup_pad(txfs_gpio);
+	mxc_iomux_v3_setup_pad(txd_gpio);
+	mxc_iomux_v3_setup_pad(reset_gpio);
+
+	gpio_direction_output(AC97_GPIO_TXFS, 0);
+	gpio_direction_output(AC97_GPIO_TXD, 0);
+
+	/* cold reset */
+	gpio_direction_output(AC97_GPIO_RESET, 0);
+	udelay(10);
+	gpio_direction_output(AC97_GPIO_RESET, 1);
+
+	mxc_iomux_v3_setup_pad(txd);
+	mxc_iomux_v3_setup_pad(txfs);
+
+	gpio_free(AC97_GPIO_RESET);
+err3:
+	gpio_free(AC97_GPIO_TXD);
+err2:
+	gpio_free(AC97_GPIO_TXFS);
+err1:
+	if (ret)
+		printk("%s failed with %d\n", __func__, ret);
+	mdelay(1);
+}
+
+static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
+	.ac97_reset = pcm043_ac97_cold_reset,
+	.ac97_warm_reset = pcm043_ac97_warm_reset,
+	.flags = IMX_SSI_USE_AC97,
+};
+
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static int pcm043_otg_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= pcm043_otg_init,
+	.portsc	= MXC_EHCI_MODE_UTMI,
+};
+
+static int pcm043_usbh1_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+	.init	= pcm043_usbh1_init,
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+};
+
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm043_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pcm043_otg_mode);
+
+static struct esdhc_platform_data sd1_pdata = {
+	.wp_gpio = SD1_GPIO_WP,
+	.cd_gpio = SD1_GPIO_CD,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init pcm043_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+	mxc_audmux_v2_configure_port(3,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TFSEL(0) |
+			MXC_AUDMUX_V2_PTCR_TFSDIR,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0));
+
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TCSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+			MXC_AUDMUX_V2_PDCR_RXDSEL(3));
+
+	imx35_add_fec(NULL);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx35_add_imx2_wdt(NULL);
+
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&pcm037_nand_board_info);
+	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
+
+	imx35_add_imx_uart1(&uart_pdata);
+
+	i2c_register_board_info(0, pcm043_i2c_devices,
+			ARRAY_SIZE(pcm043_i2c_devices));
+
+	imx35_add_imx_i2c0(&pcm043_i2c0_data);
+
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	if (otg_mode_host) {
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx35_add_mxc_ehci_otg(&otg_pdata);
+	}
+	imx35_add_mxc_ehci_hs(&usbh1_pdata);
+
+	if (!otg_mode_host)
+		imx35_add_fsl_usb2_udc(&otg_device_pdata);
+
+	imx35_add_flexcan1(NULL);
+	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+	.init	= pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+	/* Maintainer: Pengutronix */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &pcm043_timer,
+	.init_machine = pcm043_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
new file mode 100644
index 000000000000..c16328715939
--- /dev/null
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -0,0 +1,269 @@
+/*
+ *  Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices-imx31.h"
+
+/* FPGA defines */
+#define QONG_FPGA_VERSION(major, minor, rev)	\
+	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
+
+#define QONG_FPGA_BASEADDR		MX31_CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE		(1 << 24)
+
+#define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
+#define QONG_FPGA_CTRL_SIZE		0x10
+/* FPGA control registers */
+#define QONG_FPGA_CTRL_VERSION		0x00
+
+#define QONG_DNET_ID		1
+#define QONG_DNET_BASEADDR	\
+	(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
+#define QONG_DNET_SIZE		0x00001000
+
+#define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
+static inline void __init mxc_init_imx_uart(void)
+{
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
+			"uart-0");
+	imx31_add_imx_uart0(&uart_pdata);
+}
+
+static struct resource dnet_resources[] = {
+	{
+		.name	= "dnet-memory",
+		.start	= QONG_DNET_BASEADDR,
+		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= QONG_FPGA_IRQ,
+		.end	= QONG_FPGA_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dnet_device = {
+	.name			= "dnet",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(dnet_resources),
+	.resource		= dnet_resources,
+};
+
+static int __init qong_init_dnet(void)
+{
+	int ret;
+
+	ret = platform_device_register(&dnet_device);
+	return ret;
+}
+
+/* MTD NOR flash */
+
+static struct physmap_flash_data qong_flash_data = {
+	.width = 2,
+};
+
+static struct resource qong_flash_resource = {
+	.start = MX31_CS0_BASE_ADDR,
+	.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &qong_flash_data,
+		},
+	.resource = &qong_flash_resource,
+	.num_resources = 1,
+};
+
+static void qong_init_nor_mtd(void)
+{
+	(void)platform_device_register(&qong_nor_mtd_device);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
+	else
+		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int qong_nand_device_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+}
+
+static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	if (chip >= 0)
+		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+	else
+		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
+}
+
+static struct platform_nand_data qong_nand_data = {
+	.chip = {
+		.nr_chips		= 1,
+		.chip_delay		= 20,
+		.options		= 0,
+	},
+	.ctrl = {
+		.cmd_ctrl		= qong_nand_cmd_ctrl,
+		.dev_ready		= qong_nand_device_ready,
+		.select_chip		= qong_nand_select_chip,
+	}
+};
+
+static struct resource qong_nand_resource = {
+	.start		= MX31_CS3_BASE_ADDR,
+	.end		= MX31_CS3_BASE_ADDR + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nand_device = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &qong_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &qong_nand_resource,
+};
+
+static void __init qong_init_nand_mtd(void)
+{
+	/* init CS */
+	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
+	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
+
+	/* enable pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+
+	/* ready/busy pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+
+	/* write protect pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
+
+	platform_device_register(&qong_nand_device);
+}
+
+static void __init qong_init_fpga(void)
+{
+	void __iomem *regs;
+	u32 fpga_ver;
+
+	regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to map registers, aborting.\n",
+				__func__);
+		return;
+	}
+
+	fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
+	iounmap(regs);
+	printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
+			(fpga_ver & 0xF000) >> 12,
+			(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
+	if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
+		printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
+				"devices won't be registered!\n");
+		return;
+	}
+
+	/* register FPGA-based devices */
+	qong_init_nand_mtd();
+	qong_init_dnet();
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init qong_init(void)
+{
+	mxc_init_imx_uart();
+	qong_init_nor_mtd();
+	qong_init_fpga();
+}
+
+static void __init qong_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer qong_timer = {
+	.init	= qong_timer_init,
+};
+
+MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
+	/* Maintainer: DENX Software Engineering GmbH */
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &qong_timer,
+	.init_machine = qong_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
new file mode 100644
index 000000000000..d74e3473d236
--- /dev/null
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -0,0 +1,322 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
+ * Copyright 2010 Creative Product Design
+ *
+ * Derived from mx35 3stack.
+ * Original author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/mfd/mc13xxx.h>
+
+#include "devices-imx35.h"
+
+#define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
+#define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)
+
+#define GPIO_BUTTON1	IMX_GPIO_NR(1, 4)
+#define GPIO_BUTTON2	IMX_GPIO_NR(1, 5)
+#define GPIO_BUTTON3	IMX_GPIO_NR(1, 7)
+#define GPIO_BUTTON4	IMX_GPIO_NR(1, 8)
+#define GPIO_BUTTON5	IMX_GPIO_NR(1, 9)
+#define GPIO_BUTTON6	IMX_GPIO_NR(1, 10)
+#define GPIO_BUTTON7	IMX_GPIO_NR(1, 11)
+#define GPIO_BUTTON8	IMX_GPIO_NR(1, 12)
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 800x480 @ 60 Hz */
+		.name		= "PT0708048",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= KHZ2PICOS(33260),
+		.left_margin	= 50,
+		.right_margin	= 156,
+		.upper_margin	= 10,
+		.lower_margin	= 10,
+		.hsync_len	= 1,	/* note: DE only display */
+		.vsync_len	= 1,	/* note: DE only display */
+		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 800x480 @ 60 Hz */
+		.name		= "CTP-CLAA070LC0ACW",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= KHZ2PICOS(27000),
+		.left_margin	= 50,
+		.right_margin	= 50,	/* whole line should have 900 clocks */
+		.upper_margin	= 10,
+		.lower_margin	= 10,	/* whole frame should have 500 lines */
+		.hsync_len	= 1,	/* note: DE only display */
+		.vsync_len	= 1,	/* note: DE only display */
+		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}
+};
+
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+	.name		= "PT0708048",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data vpr200_flash_data = {
+	.width  = 2,
+};
+
+static struct resource vpr200_flash_resource = {
+	.start	= MX35_CS0_BASE_ADDR,
+	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device vpr200_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &vpr200_flash_data,
+	},
+	.resource = &vpr200_flash_resource,
+	.num_resources = 1,
+};
+
+static const struct mxc_nand_platform_data
+		vpr200_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+	.flash_bbt = 1,
+};
+
+#define VPR_KEY_DEBOUNCE	500
+static struct gpio_keys_button vpr200_gpio_keys_table[] = {
+	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
+	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
+	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
+};
+
+static const struct gpio_keys_platform_data
+		vpr200_gpio_keys_data __initconst = {
+	.buttons = vpr200_gpio_keys_table,
+	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
+};
+
+static struct mc13xxx_platform_data vpr200_pmic = {
+	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
+};
+
+static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
+	.bitrate = 50000,
+};
+
+static struct at24_platform_data vpr200_eeprom = {
+	.byte_len = 2048 / 8,
+	.page_size = 1,
+};
+
+static struct i2c_board_info vpr200_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
+		.platform_data = &vpr200_eeprom,
+	}, {
+		I2C_BOARD_INFO("mc13892", 0x08),
+		.platform_data = &vpr200_pmic,
+		.irq = gpio_to_irq(GPIO_PMIC_INT),
+	}
+};
+
+static iomux_v3_cfg_t vpr200_pads[] = {
+	/* UART1 */
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* UART3 */
+	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
+	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* Display */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	/* LCD Enable */
+	MX35_PAD_D3_VSYNC__GPIO1_2,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* PMIC */
+	MX35_PAD_GPIO2_0__GPIO2_0,
+	/* GPIO keys */
+	MX35_PAD_SCKR__GPIO1_4,
+	MX35_PAD_COMPARE__GPIO1_5,
+	MX35_PAD_SCKT__GPIO1_7,
+	MX35_PAD_FST__GPIO1_8,
+	MX35_PAD_HCKT__GPIO1_9,
+	MX35_PAD_TX5_RX0__GPIO1_10,
+	MX35_PAD_TX4_RX1__GPIO1_11,
+	MX35_PAD_TX3_RX2__GPIO1_12,
+};
+
+/* USB Device config */
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI,
+	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
+};
+
+static int vpr200_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id,
+			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
+}
+
+/* USB HOST config */
+static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+	.init = vpr200_usbh_init,
+	.portsc = MXC_EHCI_MODE_SERIAL,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&vpr200_flash,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init vpr200_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
+
+	imx35_add_fec(NULL);
+	imx35_add_imx2_wdt(NULL);
+	imx_add_gpio_keys(&vpr200_gpio_keys_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
+		printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+
+	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
+		printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
+	else
+		gpio_direction_input(GPIO_PMIC_INT);
+
+	imx35_add_imx_uart0(NULL);
+	imx35_add_imx_uart2(NULL);
+
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	imx35_add_fsl_usb2_udc(&otg_device_pdata);
+	imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+	imx35_add_mxc_nand(&vpr200_nand_board_info);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
+
+	i2c_register_board_info(0, vpr200_i2c_devices,
+			ARRAY_SIZE(vpr200_i2c_devices));
+
+	imx35_add_imx_i2c0(&vpr200_i2c0_data);
+}
+
+static void __init vpr200_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer vpr200_timer = {
+	.init	= vpr200_timer_init,
+};
+
+MACHINE_START(VPR200, "VPR200")
+	/* Maintainer: Creative Product Design */
+	.map_io = mx35_map_io,
+	.init_early = imx35_init_early,
+	.init_irq = mx35_init_irq,
+	.timer = &vpr200_timer,
+	.init_machine = vpr200_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
new file mode 100644
index 000000000000..86b9b45864d2
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx31.c
@@ -0,0 +1,66 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx31_io_desc[] __initdata = {
+	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx31_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
+};
+
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
+}
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
new file mode 100644
index 000000000000..c880e6d1ae55
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx35.c
@@ -0,0 +1,63 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx35_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
+};
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
+}
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
new file mode 100644
index 000000000000..7d26f766a4ee
--- /dev/null
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -0,0 +1,216 @@
+/*
+ *  LILLY-1131 development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+
+#include "devices-imx31.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LILLY-1131 development board. If you design an own baseboard for the
+ * module, use this file as base for support code.
+ */
+
+static unsigned int lilly_db_board_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_CONTRAST__CONTRAST,
+};
+
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC support */
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int gpio_det, gpio_wp;
+
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
+
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static const struct imxmmc_platform_data mmc_pdata __initconst = {
+	.get_ro	= mxc_mmc1_get_ro,
+	.init	= mxc_mmc1_init,
+	.exit	= mxc_mmc1_exit,
+};
+
+/* Framebuffer support */
+static const struct ipu_platform_data ipu_data __initconst = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb = {
+	/* 640x480 TFT panel (IPS-056T) */
+	.name		= "CRT-VGA",
+	.refresh	= 64,
+	.xres		= 640,
+	.yres		= 480,
+	.pixclock	= 30000,
+	.left_margin	= 200,
+	.right_margin	= 2,
+	.upper_margin	= 2,
+	.lower_margin	= 2,
+	.hsync_len	= 3,
+	.vsync_len	= 1,
+	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+	.vmode		= FB_VMODE_NONINTERLACED,
+	.flag		= 0,
+};
+
+static struct mx3fb_platform_data fb_pdata __initdata = {
+	.name		= "CRT-VGA",
+	.mode		= &fb_modedb,
+	.num_modes	= 1,
+};
+
+#define LCD_VCC_EN_GPIO	 (7)
+
+static void __init mx31lilly_init_fb(void)
+{
+	if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
+		printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
+		return;
+	}
+
+	imx31_add_ipu_core(&ipu_data);
+	imx31_add_mx3_sdc_fb(&fb_pdata);
+	gpio_direction_output(LCD_VCC_EN_GPIO, 1);
+}
+
+void __init mx31lilly_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
+					ARRAY_SIZE(lilly_db_board_pins),
+					"development board pins");
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
+	imx31_add_mxc_mmc(0, &mmc_pdata);
+	mx31lilly_init_fb();
+}
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
new file mode 100644
index 000000000000..5aa053edc17c
--- /dev/null
+++ b/arch/arm/mach-imx/mx31lite-db.c
@@ -0,0 +1,203 @@
+/*
+ *  LogicPD i.MX31 SOM-LV development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lite.h>
+
+#include "devices-imx31.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
+ * If you design an own baseboard for the module, use this file as base
+ * for support code.
+ */
+
+static unsigned int litekit_db_board_pins[] __initdata = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* SPI 0 */
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+};
+
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC */
+
+static int gpio_det, gpio_wp;
+
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+		     PAD_CTL_ODE_CMOS)
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
+}
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
+
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
+}
+
+static const struct imxmmc_platform_data mmc_pdata __initconst = {
+	.get_ro	 = mxc_mmc1_get_ro,
+	.init	   = mxc_mmc1_init,
+	.exit	   = mxc_mmc1_exit,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi0_pdata __initconst = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+/* GPIO LEDs */
+
+static struct gpio_led litekit_leds[] = {
+	{
+		.name           = "GPIO0",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name           = "GPIO1",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	}
+};
+
+static struct gpio_led_platform_data litekit_led_platform_data = {
+	.leds           = litekit_leds,
+	.num_leds       = ARRAY_SIZE(litekit_leds),
+};
+
+static struct platform_device litekit_led_device = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data = &litekit_led_platform_data,
+	},
+};
+
+void __init mx31lite_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
+					ARRAY_SIZE(litekit_db_board_pins),
+					"development board pins");
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_mxc_mmc(0, &mmc_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
+	platform_device_register(&litekit_led_device);
+	imx31_add_imx2_wdt(NULL);
+	imx31_add_mxc_rtc(NULL);
+}
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
new file mode 100644
index 000000000000..0aa25364360d
--- /dev/null
+++ b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -0,0 +1,242 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <linux/usb/otg.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx31.h"
+
+static unsigned int devboard_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+	return !gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
+	.get_ro	= devboard_sdhc2_get_ro,
+	.init	= devboard_sdhc2_init,
+	.exit	= devboard_sdhc2_exit,
+};
+
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void devboard_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int devboard_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int devboard_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
+	.init	= devboard_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+};
+
+static int __init devboard_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+	struct platform_device *pdev;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= devboard_isp1105_init;
+	otg->set_vbus	= devboard_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+
+
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_devboard_init(void)
+{
+	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+		"devboard");
+
+	imx31_add_imx_uart1(&uart_pdata);
+
+	imx31_add_mxc_mmc(1, &sdhc2_pdata);
+
+	devboard_init_sel_gpios();
+
+	imx31_add_fsl_usb2_udc(&usb_pdata);
+
+	devboard_usbh1_init();
+}
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
new file mode 100644
index 000000000000..bb639cbda4e5
--- /dev/null
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <linux/usb/otg.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx3.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
+
+#include "devices-imx31.h"
+
+static unsigned int marxbot_pins[] = {
+	/* SDHC2 */
+	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* CSI */
+	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
+	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+	MX31_PIN_TXD2__GPIO1_28,
+	/* dsPIC resets */
+	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
+	/*battery detection */
+	MX31_PIN_LCS0__GPIO3_23,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+	return !gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC2_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC2_CD);
+
+	ret = gpio_request(SDHC2_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC2_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc2-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC2_WP);
+err_gpio_free:
+	gpio_free(SDHC2_CD);
+
+	return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC2_CD), data);
+	gpio_free(SDHC2_WP);
+	gpio_free(SDHC2_CD);
+}
+
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
+	.get_ro	= marxbot_sdhc2_get_ro,
+	.init	= marxbot_sdhc2_init,
+	.exit	= marxbot_sdhc2_exit,
+};
+
+#define TRSLAT_RST_B	IOMUX_TO_GPIO(MX31_PIN_STXD5)
+#define DSPICS_RST_B	IOMUX_TO_GPIO(MX31_PIN_SRXD5)
+
+static void dspics_resets_init(void)
+{
+	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+		gpio_direction_output(TRSLAT_RST_B, 0);
+		gpio_export(TRSLAT_RST_B, false);
+	}
+
+	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
+		gpio_direction_output(DSPICS_RST_B, 0);
+		gpio_export(DSPICS_RST_B, false);
+	}
+}
+
+static struct spi_board_info marxbot_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 1, /* according spi1_cs[] ! */
+	},
+};
+
+#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
+#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
+
+static int marxbot_basecam_power(struct device *dev, int on)
+{
+	gpio_set_value(BASECAM_POWER, !on);
+	return 0;
+}
+
+static int marxbot_basecam_reset(struct device *dev)
+{
+	gpio_set_value(BASECAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(BASECAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info marxbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= marxbot_basecam_power,
+	.reset		= marxbot_basecam_reset,
+	.board_info	= &marxbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+};
+
+static struct platform_device marxbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *marxbot_cameras[] __initdata = {
+	&marxbot_camera[0],
+};
+
+static int __init marxbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_CHOICE, "cam-choice");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_CHOICE, 0);
+
+	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_RST_B, 1);
+	ret = gpio_request(BASECAM_POWER, "basecam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_POWER, 0);
+
+	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_RST_B, 1);
+	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_POWER, 0);
+
+	return 0;
+}
+
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void marxbot_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int marxbot_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	mdelay(10);
+
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+			MXC_EHCI_INTERFACE_SINGLE_UNI);
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int marxbot_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
+	.init	= marxbot_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+};
+
+static int __init marxbot_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+	struct platform_device *pdev;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= marxbot_isp1105_init;
+	otg->set_vbus	= marxbot_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_marxbot_init(void)
+{
+	printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+		"marxbot");
+
+	marxbot_init_sel_gpios();
+
+	dspics_resets_init();
+
+	imx31_add_mxc_mmc(1, &sdhc2_pdata);
+
+	spi_register_board_info(marxbot_spi_board_info,
+		ARRAY_SIZE(marxbot_spi_board_info));
+
+	marxbot_cam_init();
+	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
+
+	/* battery present pin */
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
+
+	imx31_add_fsl_usb2_udc(&usb_pdata);
+
+	marxbot_usbh1_init();
+}
diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
new file mode 100644
index 000000000000..fabb801e7994
--- /dev/null
+++ b/arch/arm/mach-imx/mx31moboard-smartbot.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31moboard.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
+
+#include "devices-imx31.h"
+
+static unsigned int smartbot_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+	/* CSI */
+	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+	/* ENABLES */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define CAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define CAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static int smartbot_cam_power(struct device *dev, int on)
+{
+	gpio_set_value(CAM_POWER, !on);
+	return 0;
+}
+
+static int smartbot_cam_reset(struct device *dev)
+{
+	gpio_set_value(CAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(CAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info smartbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= smartbot_cam_power,
+	.reset		= smartbot_cam_reset,
+	.board_info	= &smartbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+};
+
+static struct platform_device smartbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *smartbot_cameras[] __initdata = {
+	&smartbot_camera[0],
+};
+
+static int __init smartbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_RST_B, "cam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_RST_B, 1);
+	ret = gpio_request(CAM_POWER, "cam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_POWER, 0);
+
+	return 0;
+}
+
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+#if defined(CONFIG_USB_ULPI)
+
+static int smartbot_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
+static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
+	.init	= smartbot_otg_init,
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+};
+
+static int __init smartbot_otg_host_init(void)
+{
+	struct platform_device *pdev;
+
+	otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+		ULPI_OTG_DRVVBUS_EXT);
+	if (!otg_host_pdata.otg)
+		return -ENODEV;
+
+	pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+#else
+static inline int smartbot_otg_host_init(void) { return 0; }
+#endif
+
+#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void smartbot_resets_init(void)
+{
+	if (!gpio_request(POWER_EN, "power-enable")) {
+		gpio_direction_output(POWER_EN, 0);
+		gpio_export(POWER_EN, false);
+	}
+
+	if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
+		gpio_direction_output(DSPIC_RST_B, 0);
+		gpio_export(DSPIC_RST_B, false);
+	}
+
+	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+		gpio_direction_output(TRSLAT_RST_B, 0);
+		gpio_export(TRSLAT_RST_B, false);
+	}
+
+	if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
+		gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
+		gpio_export(TRSLAT_SRC_CHOICE, false);
+	}
+}
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_smartbot_init(int board)
+{
+	printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
+		"smartbot");
+
+	imx31_add_imx_uart1(&uart_pdata);
+
+	switch (board) {
+	case MX31SMARTBOT:
+		imx31_add_fsl_usb2_udc(&usb_pdata);
+		break;
+	case MX31EYEBOT:
+		smartbot_otg_host_init();
+		break;
+	default:
+		printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
+			board);
+	}
+
+	smartbot_resets_init();
+
+	smartbot_cam_init();
+	platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
+}
diff --git a/arch/arm/mach-imx/pcm037.h b/arch/arm/mach-imx/pcm037.h
new file mode 100644
index 000000000000..d6929721a5fd
--- /dev/null
+++ b/arch/arm/mach-imx/pcm037.h
@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+	PCM037_PCM970,
+	PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
deleted file mode 100644
index cb7d4a3a092a..000000000000
--- a/arch/arm/mach-mx3/Kconfig
+++ /dev/null
@@ -1,270 +0,0 @@
-if ARCH_MX3
-
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
-config ARCH_MX31
-	bool
-
-config ARCH_MX35
-	bool
-
-config SOC_IMX31
-	bool
-	select IMX_HAVE_PLATFORM_MXC_RNGA
-	select ARCH_MXC_AUDMUX_V2
-	select ARCH_MX31
-	select MXC_AVIC
-
-config SOC_IMX35
-	bool
-	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
-	select HAVE_EPIT
-	select ARCH_MX35
-	select MXC_AVIC
-
-comment "MX3 platforms:"
-
-config MACH_MX31ADS
-	bool "Support MX31ADS platforms"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	default y
-	help
-	  Include support for MX31ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31ADS_WM1133_EV1
-	bool "Support Wolfson Microelectronics 1133-EV1 module"
-	depends on MACH_MX31ADS
-	depends on MFD_WM8350_I2C
-	depends on REGULATOR_WM8350
-	select MFD_WM8350_CONFIG_MODE_0
-	select MFD_WM8352_CONFIG_MODE_0
-	help
-	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
-	  and audio module for the MX31ADS platform.
-
-config MACH_PCM037
-	bool "Support Phytec pcm037 (i.MX31) platforms"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Phytec pcm037 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_PCM037_EET
-	bool "Support pcm037 EET board extensions"
-	depends on MACH_PCM037
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Add support for PCM037 EET baseboard extensions. If you are using the
-	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
-	  command-line parameter.
-
-config MACH_MX31LITE
-	bool "Support MX31 LITEKIT (LogicPD)"
-	select SOC_IMX31
-	select MXC_ULPI if USB_ULPI
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_RTC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for MX31 LITEKIT platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31_3DS
-	bool "Support MX31PDK (3DS)"
-	select SOC_IMX31
-	select MXC_DEBUG_BOARD
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for MX31PDK (3DS) platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31_3DS_MXC_NAND_USE_BBT
-	bool "Make the MXC NAND driver use the in flash Bad Block Table"
-	depends on MACH_MX31_3DS
-	depends on MTD_NAND_MXC
-	help
-	  Enable this if you want that the MXC NAND driver uses the in flash
-	  Bad Block Table to know what blocks are bad instead of scanning the
-	  entire flash looking for bad block markers.
-
-config MACH_MX31MOBOARD
-	bool "Support mx31moboard platforms (EPFL Mobots group)"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for mx31moboard platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31LILLY
-	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for mx31 based LILLY1131 modules. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_QONG
-	bool "Support Dave/DENX QongEVB-LITE platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	help
-	  Include support for Dave/DENX QongEVB-LITE platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_PCM043
-	bool "Support Phytec pcm043 (i.MX35) platforms"
-	select SOC_IMX35
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Phytec pcm043 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_ARMADILLO5X0
-	bool "Support Atmark Armadillo-500 Development Base Board"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Atmark Armadillo-500 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_MX35_3DS
-	bool "Support MX35PDK platform"
-	select SOC_IMX35
-	select MXC_DEBUG_BOARD
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for MX35PDK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_KZM_ARM11_01
-	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	help
-	  Include support for KZM-ARM11-01. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_BUG
-	bool "Support Buglabs BUGBase platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	default y
-	help
-	  Include support for BUGBase 1.3 platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX35
-	bool "Support Eukrea CPUIMX35 Platform"
-	select SOC_IMX35
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Eukrea CPUIMX35 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX35
-	default MACH_EUKREA_MBIMXSD35_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD35_BASEBOARD
-	bool "Eukrea MBIMXSD development board"
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-config MACH_VPR200
-	bool "Support VPR200 platform"
-	select SOC_IMX35
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for VPR200 platform. This includes specific
-	  configurations for the board and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
deleted file mode 100644
index 15a7ff826ce7..000000000000
--- a/arch/arm/mach-mx3/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y				:= mm.o cpu.o
-obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o ehci-imx35.o
-obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037)	+= mach-pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET)	+= mach-pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS)	+= mach-mx31_3ds.o
-obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
-				   mx31moboard-marxbot.o mx31moboard-smartbot.o
-obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
-obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
-obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
-obj-$(CONFIG_MACH_BUG)		+= mach-bug.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MACH_VPR200)	+= mach-vpr200.o
diff --git a/arch/arm/mach-mx3/Makefile.boot b/arch/arm/mach-mx3/Makefile.boot
deleted file mode 100644
index e1dd366f836b..000000000000
--- a/arch/arm/mach-mx3/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	:= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x80800000
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c
deleted file mode 100644
index d423cac8cab7..000000000000
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ /dev/null
@@ -1,630 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
-#include "crm_regs.h"
-
-#define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
-
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
-{
-	u32 min_pre, temp_pre, old_err, err;
-
-	if (div >= 512) {
-		*pre = 8;
-		*post = 64;
-	} else if (div >= 64) {
-		min_pre = (div - 1) / 64 + 1;
-		old_err = 8;
-		for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
-			err = div % temp_pre;
-			if (err == 0) {
-				*pre = temp_pre;
-				break;
-			}
-			err = temp_pre - err;
-			if (err < old_err) {
-				old_err = err;
-				*pre = temp_pre;
-			}
-		}
-		*post = (div + *pre - 1) / *pre;
-	} else if (div <= 8) {
-		*pre = div;
-		*post = 1;
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-
-static struct clk mcu_pll_clk;
-static struct clk serial_pll_clk;
-static struct clk ipg_clk;
-static struct clk ckih_clk;
-
-static int cgr_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (!clk->enable_reg)
-		return 0;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 3 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void cgr_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (!clk->enable_reg)
-		return;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(3 << clk->enable_shift);
-
-	/* special case for EMI clock */
-	if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
-		reg |= (1 << clk->enable_shift);
-
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long pll_ref_get_rate(void)
-{
-	unsigned long ccmr;
-	unsigned int prcs;
-
-	ccmr = __raw_readl(MXC_CCM_CCMR);
-	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
-	if (prcs == 0x1)
-		return CKIL_CLK_FREQ * 1024;
-	else
-		return clk_get_rate(&ckih_clk);
-}
-
-static unsigned long usb_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(MXC_CCM_UPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long serial_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(MXC_CCM_SRPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long mcu_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg, ccmr;
-
-	ccmr = __raw_readl(MXC_CCM_CCMR);
-
-	if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
-		return clk_get_rate(&ckih_clk);
-
-	reg = __raw_readl(MXC_CCM_MPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static int usb_pll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg |= MXC_CCM_CCMR_UPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-
-	/* No lock bit on MX31, so using max time from spec */
-	udelay(80);
-
-	return 0;
-}
-
-static void usb_pll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_UPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-}
-
-static int serial_pll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg |= MXC_CCM_CCMR_SPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-
-	/* No lock bit on MX31, so using max time from spec */
-	udelay(80);
-
-	return 0;
-}
-
-static void serial_pll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_SPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-}
-
-#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
-#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
-#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-
-static unsigned long mcu_main_get_rate(struct clk *clk)
-{
-	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
-
-	if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
-		return clk_get_rate(&serial_pll_clk);
-	else
-		return clk_get_rate(&mcu_pll_clk);
-}
-
-static unsigned long ahb_get_rate(struct clk *clk)
-{
-	unsigned long max_pdf;
-
-	max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
-		       MXC_CCM_PDR0_MAX_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (max_pdf + 1);
-}
-
-static unsigned long ipg_get_rate(struct clk *clk)
-{
-	unsigned long ipg_pdf;
-
-	ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
-		       MXC_CCM_PDR0_IPG_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
-}
-
-static unsigned long nfc_get_rate(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-
-	nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
-		       MXC_CCM_PDR0_NFC_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
-}
-
-static unsigned long hsp_get_rate(struct clk *clk)
-{
-	unsigned long hsp_pdf;
-
-	hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
-		       MXC_CCM_PDR0_HSP_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
-}
-
-static unsigned long usb_get_rate(struct clk *clk)
-{
-	unsigned long usb_pdf, usb_prepdf;
-
-	usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
-		       MXC_CCM_PDR1_USB_PODF_OFFSET);
-	usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
-			  MXC_CCM_PDR1_USB_PRDF_OFFSET);
-	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
-}
-
-static unsigned long csi_get_rate(struct clk *clk)
-{
-	u32 reg, pre, post;
-
-	reg = __raw_readl(MXC_CCM_PDR0);
-	pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
-	    MXC_CCM_PDR0_CSI_PRDF_OFFSET;
-	pre++;
-	post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
-	    MXC_CCM_PDR0_CSI_PODF_OFFSET;
-	post++;
-	return clk_get_rate(clk->parent) / (pre * post);
-}
-
-static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 pre, post, parent = clk_get_rate(clk->parent);
-	u32 div = parent / rate;
-
-	if (parent % rate)
-		div++;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	return parent / (pre * post);
-}
-
-static int csi_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if ((parent / div) != rate)
-		return -EINVAL;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	/* Set CSI clock divider */
-	reg = __raw_readl(MXC_CCM_PDR0) &
-	    ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
-	reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
-	reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
-	__raw_writel(reg, MXC_CCM_PDR0);
-
-	return 0;
-}
-
-static unsigned long ssi1_get_rate(struct clk *clk)
-{
-	unsigned long ssi1_pdf, ssi1_prepdf;
-
-	ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
-			MXC_CCM_PDR1_SSI1_PODF_OFFSET);
-	ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
-}
-
-static unsigned long ssi2_get_rate(struct clk *clk)
-{
-	unsigned long ssi2_pdf, ssi2_prepdf;
-
-	ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
-			MXC_CCM_PDR1_SSI2_PODF_OFFSET);
-	ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
-}
-
-static unsigned long firi_get_rate(struct clk *clk)
-{
-	unsigned long firi_pdf, firi_prepdf;
-
-	firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
-			MXC_CCM_PDR1_FIRI_PODF_OFFSET);
-	firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
-}
-
-static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 pre, post;
-	u32 parent = clk_get_rate(clk->parent);
-	u32 div = parent / rate;
-
-	if (parent % rate)
-		div++;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	return parent / (pre * post);
-
-}
-
-static int firi_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if ((parent / div) != rate)
-		return -EINVAL;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	/* Set FIRI clock divider */
-	reg = __raw_readl(MXC_CCM_PDR1) &
-	    ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
-	reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
-	reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_PDR1);
-
-	return 0;
-}
-
-static unsigned long mbx_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 2;
-}
-
-static unsigned long mstick1_get_rate(struct clk *clk)
-{
-	unsigned long msti_pdf;
-
-	msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
-			MXC_CCM_PDR2_MST1_PDF_OFFSET);
-	return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long mstick2_get_rate(struct clk *clk)
-{
-	unsigned long msti_pdf;
-
-	msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
-			MXC_CCM_PDR2_MST2_PDF_OFFSET);
-	return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
-	return ckih_rate;
-}
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
-	return CKIL_CLK_FREQ;
-}
-
-static struct clk ckih_clk = {
-	.get_rate = clk_ckih_get_rate,
-};
-
-static struct clk mcu_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = mcu_pll_get_rate,
-};
-
-static struct clk mcu_main_clk = {
-	.parent = &mcu_pll_clk,
-	.get_rate = mcu_main_get_rate,
-};
-
-static struct clk serial_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = serial_pll_get_rate,
-	.enable = serial_pll_enable,
-	.disable = serial_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = usb_pll_get_rate,
-	.enable = usb_pll_enable,
-	.disable = usb_pll_disable,
-};
-
-static struct clk ahb_clk = {
-	.parent = &mcu_main_clk,
-	.get_rate = ahb_get_rate,
-};
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.enable		= cgr_enable,		\
-		.disable	= cgr_disable,		\
-		.secondary	= s,			\
-		.parent		= p,			\
-	}
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
-	static struct clk name = {				\
-		.id		= i,				\
-		.enable_reg	= er,				\
-		.enable_shift	= es,				\
-		.get_rate	= getsetround##_get_rate,	\
-		.set_rate	= getsetround##_set_rate,	\
-		.round_rate	= getsetround##_round_rate,	\
-		.enable		= cgr_enable,			\
-		.disable	= cgr_disable,			\
-		.secondary	= s,				\
-		.parent		= p,				\
-	}
-
-DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
-
-DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart2_clk,   1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(ssi1_clk,    0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(i2c1_clk,    0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c2_clk,    1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ckil_clk);
-DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(kpp_clk,     0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipu_clk,     0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
-DEFINE_CLOCK(uart3_clk,   2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart4_clk,   3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart5_clk,   4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(owire_clk,   0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(ssi2_clk,    1, MXC_CCM_CGR2,  0, ssi2_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(cspi1_clk,   0, MXC_CCM_CGR2,  2, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk,   1, MXC_CCM_CGR2,  4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mbx_clk,     0, MXC_CCM_CGR2,  6, mbx_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk,     0, MXC_CCM_CGR2,  8, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk,    0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK1(firi_clk,   0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
-
-DEFINE_CLOCK(sdma_clk2,   0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
-	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
-	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK(NULL, "firi", firi_clk)
-	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "rng", rng_clk)
-	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1)
-	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
-	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
-	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
-	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
-};
-
-int __init mx31_clocks_init(unsigned long fref)
-{
-	u32 reg;
-
-	ckih_rate = fref;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* change the csi_clk parent if necessary */
-	reg = __raw_readl(MXC_CCM_CCMR);
-	if (!(reg & MXC_CCM_CCMR_CSCS))
-		if (clk_set_parent(&csi_clk, &usb_pll_clk))
-			pr_err("%s: error changing csi_clk parent\n", __func__);
-
-
-	/* Turn off all possible clocks */
-	__raw_writel((3 << 4), MXC_CCM_CGR0);
-	__raw_writel(0, MXC_CCM_CGR1);
-	__raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
-		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
-					   MX32, but still required to be set */
-		     MXC_CCM_CGR2);
-
-	/*
-	 * Before turning off usb_pll make sure ipg_per_clk is generated
-	 * by ipg_clk and not usb_pll.
-	 */
-	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
-
-	usb_pll_disable(&usb_pll_clk);
-
-	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
-
-	clk_enable(&gpt_clk);
-	clk_enable(&emi_clk);
-	clk_enable(&iim_clk);
-
-	clk_enable(&serial_pll_clk);
-
-	mx31_read_cpu_rev();
-
-	if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
-		reg = __raw_readl(MXC_CCM_PMCR1);
-		/* No PLL restart on DVFS switch; enable auto EMI handshake */
-		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
-		__raw_writel(reg, MXC_CCM_PMCR1);
-	}
-
-	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
-			MX31_INT_GPT);
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
deleted file mode 100644
index 448a038cd1ec..000000000000
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ /dev/null
@@ -1,550 +0,0 @@
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#define CCM_BASE	MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
-
-#define CCM_CCMR        0x00
-#define CCM_PDR0        0x04
-#define CCM_PDR1        0x08
-#define CCM_PDR2        0x0C
-#define CCM_PDR3        0x10
-#define CCM_PDR4        0x14
-#define CCM_RCSR        0x18
-#define CCM_MPCTL       0x1C
-#define CCM_PPCTL       0x20
-#define CCM_ACMR        0x24
-#define CCM_COSR        0x28
-#define CCM_CGR0        0x2C
-#define CCM_CGR1        0x30
-#define CCM_CGR2        0x34
-#define CCM_CGR3        0x38
-
-#ifdef HAVE_SET_RATE_SUPPORT
-static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
-{
-	u32 min_pre, temp_pre, old_err, err;
-
-	min_pre = (div - 1) / maxpost + 1;
-	old_err = 8;
-
-	for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
-		if (div > (temp_pre * maxpost))
-			break;
-
-		if (div < (temp_pre * temp_pre))
-			continue;
-
-		err = div % temp_pre;
-
-		if (err == 0) {
-			*pre = temp_pre;
-			break;
-		}
-
-		err = temp_pre - err;
-
-		if (err < old_err) {
-			old_err = err;
-			*pre = temp_pre;
-		}
-	}
-
-	*post = (div + *pre - 1) / *pre;
-}
-
-/* get the best values for a 3-bit divider combined with a 6-bit divider */
-static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
-{
-	if (div >= 512) {
-		*pre = 8;
-		*post = 64;
-	} else if (div >= 64) {
-		calc_dividers(div, pre, post, 64);
-	} else if (div <= 8) {
-		*pre = div;
-		*post = 1;
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-
-/* get the best values for two cascaded 3-bit dividers */
-static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
-{
-	if (div >= 64) {
-		*pre = *post = 8;
-	} else if (div > 8) {
-		calc_dividers(div, pre, post, 8);
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-#endif
-
-static unsigned long get_rate_mpll(void)
-{
-	ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL);
-
-	return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_ppll(void)
-{
-	ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL);
-
-	return mxc_decode_pll(ppctl, 24000000);
-}
-
-struct arm_ahb_div {
-	unsigned char arm, ahb, sel;
-};
-
-static struct arm_ahb_div clk_consumer[] = {
-	{ .arm = 1, .ahb = 4, .sel = 0},
-	{ .arm = 1, .ahb = 3, .sel = 1},
-	{ .arm = 2, .ahb = 2, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 4, .ahb = 1, .sel = 0},
-	{ .arm = 1, .ahb = 5, .sel = 0},
-	{ .arm = 1, .ahb = 8, .sel = 0},
-	{ .arm = 1, .ahb = 6, .sel = 1},
-	{ .arm = 2, .ahb = 4, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 4, .ahb = 2, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-};
-
-static unsigned long get_rate_arm(void)
-{
-	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
-	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_mpll();
-
-	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-	if (aad->sel)
-		fref = fref * 3 / 4;
-
-	return fref / aad->arm;
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
-	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
-	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_arm();
-
-	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-
-	return fref / aad->ahb;
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
-	return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
-	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
-	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
-
-	if (pdr3 & (1 << 14))
-		return get_rate_arm() / div;
-	else
-		return get_rate_ppll() / div;
-}
-
-static unsigned long get_rate_sdhc(struct clk *clk)
-{
-	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
-	unsigned long div, rate;
-
-	if (pdr3 & (1 << 6))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	switch (clk->id) {
-	default:
-	case 0:
-		div = pdr3 & 0x3f;
-		break;
-	case 1:
-		div = (pdr3 >> 8) & 0x3f;
-		break;
-	case 2:
-		div = (pdr3 >> 16) & 0x3f;
-		break;
-	}
-
-	return rate / (div + 1);
-}
-
-static unsigned long get_rate_mshc(struct clk *clk)
-{
-	unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1);
-	unsigned long div1, div2, rate;
-
-	if (pdr1 & (1 << 7))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	div1 = (pdr1 >> 29) & 0x7;
-	div2 = (pdr1 >> 22) & 0x3f;
-
-	return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_ssi(struct clk *clk)
-{
-	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
-	unsigned long div1, div2, rate;
-
-	if (pdr2 & (1 << 6))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	switch (clk->id) {
-	default:
-	case 0:
-		div1 = pdr2 & 0x3f;
-		div2 = (pdr2 >> 24) & 0x7;
-		break;
-	case 1:
-		div1 = (pdr2 >> 8) & 0x3f;
-		div2 = (pdr2 >> 27) & 0x7;
-		break;
-	}
-
-	return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
-	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
-	unsigned long rate;
-
-	if (pdr2 & (1 << 7))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	return rate / (((pdr2 >> 16) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
-	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long rate;
-
-	if (pdr4 & (1 << 9))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	return rate / (((pdr4 >> 22) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_ipg_per(struct clk *clk)
-{
-	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
-	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div;
-
-	if (pdr0 & (1 << 26)) {
-		div = (pdr4 >> 16) & 0x3f;
-		return get_rate_arm() / (div + 1);
-	} else {
-		div = (pdr0 >> 12) & 0x7;
-		return get_rate_ahb(NULL) / (div + 1);
-	}
-}
-
-static unsigned long get_rate_hsp(struct clk *clk)
-{
-	unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
-	unsigned long fref = get_rate_mpll();
-
-	if (fref > 400 * 1000 * 1000) {
-		switch (hsp_podf) {
-		case 0:
-			return fref >> 2;
-		case 1:
-			return fref >> 3;
-		case 2:
-			return fref / 3;
-		}
-	} else {
-		switch (hsp_podf) {
-		case 0:
-		case 2:
-			return fref / 3;
-		case 1:
-			return fref / 6;
-		}
-	}
-
-	return 0;
-}
-
-static int clk_cgr_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 3 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void clk_cgr_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(3 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= CCM_BASE + er,	\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.set_rate	= sr,			\
-		.enable		= clk_cgr_enable,	\
-		.disable	= clk_cgr_disable,	\
-	}
-
-DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
-DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
-/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL); */
-DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGR0, 10, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  1, CCM_CGR0, 12, get_rate_ipg, NULL);
-DEFINE_CLOCK(ect_clk,    0, CCM_CGR0, 14, get_rate_ipg, NULL);
-DEFINE_CLOCK(edio_clk,   0, CCM_CGR0, 16, NULL, NULL);
-DEFINE_CLOCK(emi_clk,    0, CCM_CGR0, 18, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit1_clk,  0, CCM_CGR0, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit2_clk,  1, CCM_CGR0, 22, get_rate_ipg, NULL);
-DEFINE_CLOCK(esai_clk,   0, CCM_CGR0, 24, NULL, NULL);
-DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL);
-
-DEFINE_CLOCK(fec_clk,    0, CCM_CGR1,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(gpio1_clk,  0, CCM_CGR1,  2, NULL, NULL);
-DEFINE_CLOCK(gpio2_clk,  1, CCM_CGR1,  4, NULL, NULL);
-DEFINE_CLOCK(gpio3_clk,  2, CCM_CGR1,  6, NULL, NULL);
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGR1,  8, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_hsp, NULL);
-DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
-DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
-DEFINE_CLOCK(owire_clk,  0, CCM_CGR1, 26, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(pwm_clk,    0, CCM_CGR1, 28, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(rngc_clk,   0, CCM_CGR1, 30, get_rate_ipg, NULL);
-
-DEFINE_CLOCK(rtc_clk,    0, CCM_CGR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(rtic_clk,   0, CCM_CGR2,  2, get_rate_ahb, NULL);
-DEFINE_CLOCK(scc_clk,    0, CCM_CGR2,  4, get_rate_ipg, NULL);
-DEFINE_CLOCK(sdma_clk,   0, CCM_CGR2,  6, NULL, NULL);
-DEFINE_CLOCK(spba_clk,   0, CCM_CGR2,  8, get_rate_ipg, NULL);
-DEFINE_CLOCK(spdif_clk,  0, CCM_CGR2, 10, NULL, NULL);
-DEFINE_CLOCK(ssi1_clk,   0, CCM_CGR2, 12, get_rate_ssi, NULL);
-DEFINE_CLOCK(ssi2_clk,   1, CCM_CGR2, 14, get_rate_ssi, NULL);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  1, CCM_CGR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
-DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
-DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL);
-
-DEFINE_CLOCK(csi_clk,    0, CCM_CGR3,  0, get_rate_csi, NULL);
-DEFINE_CLOCK(iim_clk,    0, CCM_CGR3,  2, NULL, NULL);
-DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
-
-DEFINE_CLOCK(usbahb_clk, 0, 0,         0, get_rate_ahb, NULL);
-
-static int clk_dummy_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static void clk_dummy_disable(struct clk *clk)
-{
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
-	unsigned long div1;
-
-	div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1;
-
-	return get_rate_ahb(NULL) / div1;
-}
-
-/* NAND Controller: It seems it can't be disabled */
-static struct clk nfc_clk = {
-	.id		= 0,
-	.enable_reg	= 0,
-	.enable_shift	= 0,
-	.get_rate	= get_rate_nfc,
-	.set_rate	= NULL, /* set_rate_nfc, */
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable
-};
-
-#define _REGISTER_CLOCK(d, n, c)	\
-	{				\
-		.dev_id = d,		\
-		.con_id = n,		\
-		.clk = &c,		\
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
-	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
-	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK(NULL, "ect", ect_clk)
-	_REGISTER_CLOCK(NULL, "edio", edio_clk)
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
-	_REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
-	_REGISTER_CLOCK(NULL, "esai", esai_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
-	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
-	_REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
-	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
-	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
-	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
-	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
-	_REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK(NULL, "rngc", rngc_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK(NULL, "spba", spba_clk)
-	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "max", max_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
-	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-};
-
-int __init mx35_clocks_init()
-{
-	unsigned int cgr2 = 3 << 26, cgr3 = 0;
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	cgr2 |= 3 << 16;
-#endif
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clocks except the ones we need to survive, namely:
-	 * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
-	 */
-	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
-	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
-			CCM_BASE + CCM_CGR1);
-
-	/*
-	 * Check if we came up in internal boot mode. If yes, we need some
-	 * extra clocks turned on, otherwise the MX35 boot ROM code will
-	 * hang after a watchdog reset.
-	 */
-	if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
-		/* Additionally turn on UART1, SCC, and IIM clocks */
-		cgr2 |= 3 << 16 | 3 << 4;
-		cgr3 |= 3 << 2;
-	}
-
-	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
-	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
-
-	clk_enable(&iim_clk);
-	mx35_read_cpu_rev();
-
-#ifdef CONFIG_MXC_USE_EPIT
-	epit_timer_init(&epit1_clk,
-			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
-#else
-	mxc_timer_init(&gpt_clk,
-			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
-#endif
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
deleted file mode 100644
index d1d339576fdf..000000000000
--- a/arch/arm/mach-mx3/cpu.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * MX3 CPU type detection
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
-
-unsigned int mx31_cpu_rev;
-EXPORT_SYMBOL(mx31_cpu_rev);
-
-struct mx3_cpu_type {
-	u8 srev;
-	const char *name;
-	const char *v;
-	unsigned int rev;
-};
-
-static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
-	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = IMX_CHIP_REVISION_1_0	},
-	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
-	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
-	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
-	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
-};
-
-void __init mx31_read_cpu_rev(void)
-{
-	u32 i, srev;
-
-	/* read SREV register from IIM module */
-	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
-
-	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
-		if (srev == mx31_cpu_type[i].srev) {
-			printk(KERN_INFO
-				"CPU identified as %s, silicon rev %s\n",
-				mx31_cpu_type[i].name, mx31_cpu_type[i].v);
-
-			mx31_cpu_rev = mx31_cpu_type[i].rev;
-			return;
-		}
-
-	mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
-
-	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
-}
-
-unsigned int mx35_cpu_rev;
-EXPORT_SYMBOL(mx35_cpu_rev);
-
-void __init mx35_read_cpu_rev(void)
-{
-	u32 rev;
-	char *srev;
-
-	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
-	switch (rev) {
-	case 0x00:
-		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
-		srev = "1.0";
-		break;
-	case 0x10:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
-		srev = "2.0";
-		break;
-	case 0x11:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
-		srev = "2.1";
-		break;
-	default:
-		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
-		srev = "unknown";
-	}
-
-	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
-}
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
deleted file mode 100644
index 37a8a07beda3..000000000000
--- a/arch/arm/mach-mx3/crm_regs.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__
-
-#define CKIH_CLK_FREQ           26000000
-#define CKIH_CLK_FREQ_27MHZ     27000000
-#define CKIL_CLK_FREQ           32768
-
-#define MXC_CCM_BASE		MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
-
-/* Register addresses */
-#define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)
-#define MXC_CCM_PDR0		(MXC_CCM_BASE + 0x04)
-#define MXC_CCM_PDR1		(MXC_CCM_BASE + 0x08)
-#define MXC_CCM_RCSR		(MXC_CCM_BASE + 0x0C)
-#define MXC_CCM_MPCTL		(MXC_CCM_BASE + 0x10)
-#define MXC_CCM_UPCTL		(MXC_CCM_BASE + 0x14)
-#define MXC_CCM_SRPCTL		(MXC_CCM_BASE + 0x18)
-#define MXC_CCM_COSR		(MXC_CCM_BASE + 0x1C)
-#define MXC_CCM_CGR0		(MXC_CCM_BASE + 0x20)
-#define MXC_CCM_CGR1		(MXC_CCM_BASE + 0x24)
-#define MXC_CCM_CGR2		(MXC_CCM_BASE + 0x28)
-#define MXC_CCM_WIMR		(MXC_CCM_BASE + 0x2C)
-#define MXC_CCM_LDC		(MXC_CCM_BASE + 0x30)
-#define MXC_CCM_DCVR0		(MXC_CCM_BASE + 0x34)
-#define MXC_CCM_DCVR1		(MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR2		(MXC_CCM_BASE + 0x3C)
-#define MXC_CCM_DCVR3		(MXC_CCM_BASE + 0x40)
-#define MXC_CCM_LTR0		(MXC_CCM_BASE + 0x44)
-#define MXC_CCM_LTR1		(MXC_CCM_BASE + 0x48)
-#define MXC_CCM_LTR2		(MXC_CCM_BASE + 0x4C)
-#define MXC_CCM_LTR3		(MXC_CCM_BASE + 0x50)
-#define MXC_CCM_LTBR0		(MXC_CCM_BASE + 0x54)
-#define MXC_CCM_LTBR1		(MXC_CCM_BASE + 0x58)
-#define MXC_CCM_PMCR0		(MXC_CCM_BASE + 0x5C)
-#define MXC_CCM_PMCR1		(MXC_CCM_BASE + 0x60)
-#define MXC_CCM_PDR2		(MXC_CCM_BASE + 0x64)
-
-/* Register bit definitions */
-#define MXC_CCM_CCMR_WBEN                       (1 << 27)
-#define MXC_CCM_CCMR_CSCS                       (1 << 25)
-#define MXC_CCM_CCMR_PERCS                      (1 << 24)
-#define MXC_CCM_CCMR_SSI1S_OFFSET               18
-#define MXC_CCM_CCMR_SSI1S_MASK                 (0x3 << 18)
-#define MXC_CCM_CCMR_SSI2S_OFFSET               21
-#define MXC_CCM_CCMR_SSI2S_MASK                 (0x3 << 21)
-#define MXC_CCM_CCMR_LPM_OFFSET                 14
-#define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
-#define MXC_CCM_CCMR_FIRS_OFFSET                11
-#define MXC_CCM_CCMR_FIRS_MASK                  (0x3 << 11)
-#define MXC_CCM_CCMR_UPE                        (1 << 9)
-#define MXC_CCM_CCMR_SPE                        (1 << 8)
-#define MXC_CCM_CCMR_MDS                        (1 << 7)
-#define MXC_CCM_CCMR_SBYCS                      (1 << 4)
-#define MXC_CCM_CCMR_MPE                        (1 << 3)
-#define MXC_CCM_CCMR_PRCS_OFFSET                1
-#define MXC_CCM_CCMR_PRCS_MASK                  (0x3 << 1)
-
-#define MXC_CCM_PDR0_CSI_PODF_OFFSET            26
-#define MXC_CCM_PDR0_CSI_PODF_MASK              (0x3F << 26)
-#define MXC_CCM_PDR0_CSI_PRDF_OFFSET            23
-#define MXC_CCM_PDR0_CSI_PRDF_MASK              (0x7 << 23)
-#define MXC_CCM_PDR0_PER_PODF_OFFSET            16
-#define MXC_CCM_PDR0_PER_PODF_MASK              (0x1F << 16)
-#define MXC_CCM_PDR0_HSP_PODF_OFFSET            11
-#define MXC_CCM_PDR0_HSP_PODF_MASK              (0x7 << 11)
-#define MXC_CCM_PDR0_NFC_PODF_OFFSET            8
-#define MXC_CCM_PDR0_NFC_PODF_MASK              (0x7 << 8)
-#define MXC_CCM_PDR0_IPG_PODF_OFFSET            6
-#define MXC_CCM_PDR0_IPG_PODF_MASK              (0x3 << 6)
-#define MXC_CCM_PDR0_MAX_PODF_OFFSET            3
-#define MXC_CCM_PDR0_MAX_PODF_MASK              (0x7 << 3)
-#define MXC_CCM_PDR0_MCU_PODF_OFFSET            0
-#define MXC_CCM_PDR0_MCU_PODF_MASK              0x7
-
-#define MXC_CCM_PDR1_USB_PRDF_OFFSET            30
-#define MXC_CCM_PDR1_USB_PRDF_MASK              (0x3 << 30)
-#define MXC_CCM_PDR1_USB_PODF_OFFSET            27
-#define MXC_CCM_PDR1_USB_PODF_MASK              (0x7 << 27)
-#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET       24
-#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK         (0x7 << 24)
-#define MXC_CCM_PDR1_FIRI_PODF_OFFSET           18
-#define MXC_CCM_PDR1_FIRI_PODF_MASK             (0x3F << 18)
-#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET       15
-#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK         (0x7 << 15)
-#define MXC_CCM_PDR1_SSI2_PODF_OFFSET           9
-#define MXC_CCM_PDR1_SSI2_PODF_MASK             (0x3F << 9)
-#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET       6
-#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK         (0x7 << 6)
-#define MXC_CCM_PDR1_SSI1_PODF_OFFSET           0
-#define MXC_CCM_PDR1_SSI1_PODF_MASK             0x3F
-
-/* Bit definitions for RCSR */
-#define MXC_CCM_RCSR_NF16B			0x80000000
-
-/*
- * LTR0 register offsets
- */
-#define MXC_CCM_LTR0_DIV3CK_OFFSET              1
-#define MXC_CCM_LTR0_DIV3CK_MASK                (0x3 << 1)
-#define MXC_CCM_LTR0_DNTHR_OFFSET               16
-#define MXC_CCM_LTR0_DNTHR_MASK                 (0x3F << 16)
-#define MXC_CCM_LTR0_UPTHR_OFFSET               22
-#define MXC_CCM_LTR0_UPTHR_MASK                 (0x3F << 22)
-
-/*
- * LTR1 register offsets
- */
-#define MXC_CCM_LTR1_PNCTHR_OFFSET              0
-#define MXC_CCM_LTR1_PNCTHR_MASK                0x3F
-#define MXC_CCM_LTR1_UPCNT_OFFSET               6
-#define MXC_CCM_LTR1_UPCNT_MASK                 (0xFF << 6)
-#define MXC_CCM_LTR1_DNCNT_OFFSET               14
-#define MXC_CCM_LTR1_DNCNT_MASK                 (0xFF << 14)
-#define MXC_CCM_LTR1_LTBRSR_MASK                0x400000
-#define MXC_CCM_LTR1_LTBRSR_OFFSET              22
-#define MXC_CCM_LTR1_LTBRSR                     0x400000
-#define MXC_CCM_LTR1_LTBRSH                     0x800000
-
-/*
- * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15
- */
-#define MXC_CCM_LTR2_WSW_OFFSET(x)              (11 + (x) * 3)
-#define MXC_CCM_LTR2_WSW_MASK(x)                (0x7 << \
-					MXC_CCM_LTR2_WSW_OFFSET((x)))
-#define MXC_CCM_LTR2_EMAC_OFFSET                0
-#define MXC_CCM_LTR2_EMAC_MASK                  0x1FF
-
-/*
- * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8
- */
-#define MXC_CCM_LTR3_WSW_OFFSET(x)              (5 + (x) * 3)
-#define MXC_CCM_LTR3_WSW_MASK(x)                (0x7 << \
-					MXC_CCM_LTR3_WSW_OFFSET((x)))
-
-#define MXC_CCM_PMCR0_DFSUP1                    0x80000000
-#define MXC_CCM_PMCR0_DFSUP1_SPLL               (0 << 31)
-#define MXC_CCM_PMCR0_DFSUP1_MPLL               (1 << 31)
-#define MXC_CCM_PMCR0_DFSUP0                    0x40000000
-#define MXC_CCM_PMCR0_DFSUP0_PLL                (0 << 30)
-#define MXC_CCM_PMCR0_DFSUP0_PDR                (1 << 30)
-#define MXC_CCM_PMCR0_DFSUP_MASK                (0x3 << 30)
-
-#define DVSUP_TURBO				0
-#define DVSUP_HIGH				1
-#define DVSUP_MEDIUM				2
-#define DVSUP_LOW				3
-#define MXC_CCM_PMCR0_DVSUP_TURBO               (DVSUP_TURBO << 28)
-#define MXC_CCM_PMCR0_DVSUP_HIGH                (DVSUP_HIGH << 28)
-#define MXC_CCM_PMCR0_DVSUP_MEDIUM              (DVSUP_MEDIUM << 28)
-#define MXC_CCM_PMCR0_DVSUP_LOW                 (DVSUP_LOW << 28)
-#define MXC_CCM_PMCR0_DVSUP_OFFSET              28
-#define MXC_CCM_PMCR0_DVSUP_MASK                (0x3 << 28)
-#define MXC_CCM_PMCR0_UDSC                      0x08000000
-#define MXC_CCM_PMCR0_UDSC_MASK                 (1 << 27)
-#define MXC_CCM_PMCR0_UDSC_UP                   (1 << 27)
-#define MXC_CCM_PMCR0_UDSC_DOWN                 (0 << 27)
-
-#define MXC_CCM_PMCR0_VSCNT_1                   (0x0 << 24)
-#define MXC_CCM_PMCR0_VSCNT_2                   (0x1 << 24)
-#define MXC_CCM_PMCR0_VSCNT_3                   (0x2 << 24)
-#define MXC_CCM_PMCR0_VSCNT_4                   (0x3 << 24)
-#define MXC_CCM_PMCR0_VSCNT_5                   (0x4 << 24)
-#define MXC_CCM_PMCR0_VSCNT_6                   (0x5 << 24)
-#define MXC_CCM_PMCR0_VSCNT_7                   (0x6 << 24)
-#define MXC_CCM_PMCR0_VSCNT_8                   (0x7 << 24)
-#define MXC_CCM_PMCR0_VSCNT_OFFSET              24
-#define MXC_CCM_PMCR0_VSCNT_MASK                (0x7 << 24)
-#define MXC_CCM_PMCR0_DVFEV                     0x00800000
-#define MXC_CCM_PMCR0_DVFIS                     0x00400000
-#define MXC_CCM_PMCR0_LBMI                      0x00200000
-#define MXC_CCM_PMCR0_LBFL                      0x00100000
-#define MXC_CCM_PMCR0_LBCF_4                    (0x0 << 18)
-#define MXC_CCM_PMCR0_LBCF_8                    (0x1 << 18)
-#define MXC_CCM_PMCR0_LBCF_12                   (0x2 << 18)
-#define MXC_CCM_PMCR0_LBCF_16                   (0x3 << 18)
-#define MXC_CCM_PMCR0_LBCF_OFFSET               18
-#define MXC_CCM_PMCR0_LBCF_MASK                 (0x3 << 18)
-#define MXC_CCM_PMCR0_PTVIS                     0x00020000
-#define MXC_CCM_PMCR0_UPDTEN                    0x00010000
-#define MXC_CCM_PMCR0_UPDTEN_MASK               (0x1 << 16)
-#define MXC_CCM_PMCR0_FSVAIM                    0x00008000
-#define MXC_CCM_PMCR0_FSVAI_OFFSET              13
-#define MXC_CCM_PMCR0_FSVAI_MASK                (0x3 << 13)
-#define MXC_CCM_PMCR0_DPVCR                     0x00001000
-#define MXC_CCM_PMCR0_DPVV                      0x00000800
-#define MXC_CCM_PMCR0_WFIM                      0x00000400
-#define MXC_CCM_PMCR0_DRCE3                     0x00000200
-#define MXC_CCM_PMCR0_DRCE2                     0x00000100
-#define MXC_CCM_PMCR0_DRCE1                     0x00000080
-#define MXC_CCM_PMCR0_DRCE0                     0x00000040
-#define MXC_CCM_PMCR0_DCR                       0x00000020
-#define MXC_CCM_PMCR0_DVFEN                     0x00000010
-#define MXC_CCM_PMCR0_PTVAIM                    0x00000008
-#define MXC_CCM_PMCR0_PTVAI_OFFSET              1
-#define MXC_CCM_PMCR0_PTVAI_MASK                (0x3 << 1)
-#define MXC_CCM_PMCR0_DPTEN                     0x00000001
-
-#define MXC_CCM_PMCR1_DVGP_OFFSET               0
-#define MXC_CCM_PMCR1_DVGP_MASK                 (0xF)
-
-#define MXC_CCM_PMCR1_PLLRDIS                      (0x1 << 7)
-#define MXC_CCM_PMCR1_EMIRQ_EN                      (0x1 << 8)
-
-#define MXC_CCM_DCVR_ULV_MASK                   (0x3FF << 22)
-#define MXC_CCM_DCVR_ULV_OFFSET                 22
-#define MXC_CCM_DCVR_LLV_MASK                   (0x3FF << 12)
-#define MXC_CCM_DCVR_LLV_OFFSET                 12
-#define MXC_CCM_DCVR_ELV_MASK                   (0x3FF << 2)
-#define MXC_CCM_DCVR_ELV_OFFSET                 2
-
-#define MXC_CCM_PDR2_MST2_PDF_MASK              (0x3F << 7)
-#define MXC_CCM_PDR2_MST2_PDF_OFFSET            7
-#define MXC_CCM_PDR2_MST1_PDF_MASK              0x3F
-#define MXC_CCM_PDR2_MST1_PDF_OFFSET            0
-
-#define MXC_CCM_COSR_CLKOSEL_MASK               0x0F
-#define MXC_CCM_COSR_CLKOSEL_OFFSET             0
-#define MXC_CCM_COSR_CLKOUTDIV_MASK             (0x07 << 6)
-#define MXC_CCM_COSR_CLKOUTDIV_OFFSET           6
-#define MXC_CCM_COSR_CLKOEN                     (1 << 9)
-
-/*
- * PMCR0 register offsets
- */
-#define MXC_CCM_PMCR0_LBFL_OFFSET   20
-#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30
-#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31
-
-#endif				/* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
deleted file mode 100644
index dbe940d9c53a..000000000000
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx31.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
-#define imx31_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
-#define imx31_add_imx2_wdt(pdata)       \
-	imx_add_imx2_wdt(&imx31_imx2_wdt_data)
-
-extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
-#define imx31_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
-#define imx31_add_imx_i2c0(pdata)	imx31_add_imx_i2c(0, pdata)
-#define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
-#define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
-#define imx31_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
-#define imx31_add_imx_ssi(id, pdata)    \
-	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
-#define imx31_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
-#define imx31_add_imx_uart0(pdata)	imx31_add_imx_uart(0, pdata)
-#define imx31_add_imx_uart1(pdata)	imx31_add_imx_uart(1, pdata)
-#define imx31_add_imx_uart2(pdata)	imx31_add_imx_uart(2, pdata)
-#define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
-#define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
-
-extern const struct imx_ipu_core_data imx31_ipu_core_data;
-#define imx31_add_ipu_core(pdata)	\
-	imx_add_ipu_core(&imx31_ipu_core_data, pdata)
-#define imx31_alloc_mx3_camera(pdata)	\
-	imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
-#define imx31_add_mx3_sdc_fb(pdata)	\
-	imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
-#define imx31_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
-#define imx31_add_mxc_ehci_hs(id, pdata)	\
-	imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
-#define imx31_add_mxc_mmc(id, pdata)	\
-	imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
-#define imx31_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
-#define imx31_add_mxc_rtc(pdata)	\
-	imx_add_mxc_rtc(&imx31_mxc_rtc_data)
-
-extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
-#define imx31_add_mxc_w1(pdata)	\
-	imx_add_mxc_w1(&imx31_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx31_cspi_data[];
-#define imx31_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
-#define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
-#define imx31_add_spi_imx1(pdata)	imx31_add_cspi(1, pdata)
-#define imx31_add_spi_imx2(pdata)	imx31_add_cspi(2, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
deleted file mode 100644
index 234cbd3c18af..000000000000
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx35.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx35_fec_data;
-#define imx35_add_fec(pdata)	\
-	imx_add_fec(&imx35_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
-#define imx35_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_flexcan_data imx35_flexcan_data[];
-#define imx35_add_flexcan(id, pdata)	\
-	imx_add_flexcan(&imx35_flexcan_data[id], pdata)
-#define imx35_add_flexcan0(pdata)	imx35_add_flexcan(0, pdata)
-#define imx35_add_flexcan1(pdata)	imx35_add_flexcan(1, pdata)
-
-extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
-#define imx35_add_imx2_wdt(pdata)       \
-	imx_add_imx2_wdt(&imx35_imx2_wdt_data)
-
-extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
-#define imx35_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
-#define imx35_add_imx_i2c0(pdata)	imx35_add_imx_i2c(0, pdata)
-#define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
-#define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
-#define imx35_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
-#define imx35_add_imx_ssi(id, pdata)    \
-	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
-#define imx35_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
-#define imx35_add_imx_uart0(pdata)	imx35_add_imx_uart(0, pdata)
-#define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
-#define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
-
-extern const struct imx_ipu_core_data imx35_ipu_core_data;
-#define imx35_add_ipu_core(pdata)	\
-	imx_add_ipu_core(&imx35_ipu_core_data, pdata)
-#define imx35_alloc_mx3_camera(pdata)	\
-	imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
-#define imx35_add_mx3_sdc_fb(pdata)	\
-	imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
-#define imx35_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
-#define imx35_add_mxc_ehci_hs(pdata)	\
-	imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
-
-extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
-#define imx35_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
-#define imx35_add_mxc_w1(pdata)	\
-	imx_add_mxc_w1(&imx35_mxc_w1_data)
-
-extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
-#define imx35_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx35_cspi_data[];
-#define imx35_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
-#define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
-#define imx35_add_spi_imx1(pdata)	imx35_add_cspi(1, pdata)
diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-mx3/ehci-imx31.c
deleted file mode 100644
index 314a983ac614..000000000000
--- a/arch/arm/mach-mx3/ehci-imx31.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT		(1 << 24)
-
-#define MX31_H2_SIC_SHIFT	21
-#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
-#define MX31_H2_PM_BIT		(1 << 16)
-#define MX31_H2_DT_BIT		(1 << 5)
-
-#define MX31_H1_SIC_SHIFT	13
-#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
-#define MX31_H1_PM_BIT		(1 << 8)
-#define MX31_H1_DT_BIT		(1 << 4)
-
-int mx31_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX31_OTG_PM_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX31_H1_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX31_H1_DT_BIT;
-
-		break;
-	case 2:	/* H2 port */
-		v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX31_H2_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX31_H2_DT_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-mx3/ehci-imx35.c
deleted file mode 100644
index 33983a478c6b..000000000000
--- a/arch/arm/mach-mx3/ehci-imx35.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX35_OTG_SIC_SHIFT	29
-#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
-#define MX35_OTG_PM_BIT		(1 << 24)
-
-#define MX35_H1_SIC_SHIFT	21
-#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
-#define MX35_H1_PM_BIT		(1 << 8)
-#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
-#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
-#define MX35_H1_TLL_BIT		(1 << 5)
-#define MX35_H1_USBTE_BIT	(1 << 4)
-
-int mx35_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX35_OTG_PM_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
-			MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX35_H1_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX35_H1_TLL_BIT;
-
-		if (flags & MXC_EHCI_INTERNAL_PHY)
-			v |= MX35_H1_USBTE_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_DOWN)
-			v |= MX35_H1_IPPUE_DOWN_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_UP)
-			v |= MX35_H1_IPPUE_UP_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
deleted file mode 100644
index 4909ea05855a..000000000000
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <video/platform_lcd.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/audmux.h>
-
-#include "devices-imx35.h"
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		.name		= "CMO-QVGA",
-		.refresh	= 60,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6500),
-		.left_margin	= 68,
-		.right_margin	= 20,
-		.upper_margin	= 15,
-		.lower_margin	= 4,
-		.hsync_len	= 30,
-		.vsync_len	= 3,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-	{
-		.name		= "DVI-VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 32000,
-		.left_margin	= 100,
-		.right_margin	= 100,
-		.upper_margin	= 7,
-		.lower_margin	= 100,
-		.hsync_len	= 7,
-		.vsync_len	= 7,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
-				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-	{
-		.name		= "DVI-SVGA",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 600,
-		.pixclock	= 25000,
-		.left_margin	= 75,
-		.right_margin	= 75,
-		.upper_margin	= 7,
-		.lower_margin	= 75,
-		.hsync_len	= 7,
-		.vsync_len	= 7,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
-				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "CMO-QVGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
-	/* LCD */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
-	/* Backlight */
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	/* LCD_PWR */
-	MX35_PAD_D3_CLS__GPIO1_4,
-	/* LED */
-	MX35_PAD_LD23__GPIO3_29,
-	/* SWITCH */
-	MX35_PAD_LD19__GPIO3_25,
-	/* UART2 */
-	MX35_PAD_CTS2__UART2_CTS,
-	MX35_PAD_RTS2__UART2_RTS,
-	MX35_PAD_TXD2__UART2_TXD_MUX,
-	MX35_PAD_RXD2__UART2_RXD_MUX,
-	/* I2S */
-	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
-	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
-	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
-	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
-	/* CAN2 */
-	MX35_PAD_TX5_RX0__CAN2_TXCAN,
-	MX35_PAD_TX4_RX1__CAN2_RXCAN,
-	/* SDCARD */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD1 CD */
-	MX35_PAD_LD18__GPIO3_24,
-};
-
-#define GPIO_LED1	IMX_GPIO_NR(3, 29)
-#define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
-#define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
-#define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_LCDPWR, 1);
-	else
-		gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
-	.set_power		= eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
-};
-
-static struct gpio_led eukrea_mbimxsd_leds[] = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_LED1,
-	},
-};
-
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &eukrea_mbimxsd_led_info,
-	},
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
-	{
-		.gpio		= GPIO_SWITCH1,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		eukrea_mbimxsd_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
-	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
-	.cd_gpio = GPIO_SD1CD,
-	.wp_gpio = -EINVAL,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx35 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd35_baseboard_init(void)
-{
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
-		printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
-	/* SSI unit master I2S codec connected to SSI_AUD4 */
-	mxc_audmux_v2_configure_port(0,
-			MXC_AUDMUX_V2_PTCR_SYN |
-			MXC_AUDMUX_V2_PTCR_TFSDIR |
-			MXC_AUDMUX_V2_PTCR_TFSEL(3) |
-			MXC_AUDMUX_V2_PTCR_TCLKDIR |
-			MXC_AUDMUX_V2_PTCR_TCSEL(3),
-			MXC_AUDMUX_V2_PDCR_RXDSEL(3)
-	);
-	mxc_audmux_v2_configure_port(3,
-			MXC_AUDMUX_V2_PTCR_SYN,
-			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
-	);
-#endif
-
-	imx35_add_imx_uart1(&uart_pdata);
-	imx35_add_ipu_core(&mx3_ipu_data);
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
-
-	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
-
-	gpio_request(GPIO_LED1, "LED1");
-	gpio_direction_output(GPIO_LED1, 1);
-	gpio_free(GPIO_LED1);
-
-	gpio_request(GPIO_SWITCH1, "SWITCH1");
-	gpio_direction_input(GPIO_SWITCH1);
-	gpio_free(GPIO_SWITCH1);
-
-	gpio_request(GPIO_LCDPWR, "LCDPWR");
-	gpio_direction_output(GPIO_LCDPWR, 1);
-
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
-}
diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-mx3/iomux-imx31.c
deleted file mode 100644
index cf8f8099ebd7..000000000000
--- a/arch/arm/mach-mx3/iomux-imx31.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/iomux-mx3.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_BASE	MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
-#define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
-#define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
-#define IOMUXGPR	(IOMUX_BASE + 0x008)
-#define IOMUXSW_MUX_CTL	(IOMUX_BASE + 0x00C)
-#define IOMUXSW_PAD_CTL	(IOMUX_BASE + 0x154)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
-	u32 field, l, mode, ret = 0;
-	void __iomem *reg;
-
-	reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
-	field = pin_mode & 0x3;
-	mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0xff << (field * 8));
-	l |= mode << (field * 8);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
-	u32 field, l;
-	void __iomem *reg;
-
-	pin &= IOMUX_PADNUM_MASK;
-	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
-	field = (pin + 2) % 3;
-
-	pr_debug("%s: reg offset = 0x%x, field = %d\n",
-			__func__, (pin + 2) / 3, field);
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0x1ff << (field * 10));
-	l |= config << (field * 10);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
-{
-	unsigned pad = pin & IOMUX_PADNUM_MASK;
-
-	if (pad >= (PIN_MAX + 1)) {
-		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
-			pad, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
-		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
-			pad, label ? label : "?");
-		return -EBUSY;
-	}
-	mxc_iomux_mode(pin);
-
-	return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
-		const char *label)
-{
-	const unsigned int *p = pin_list;
-	int i;
-	int ret = -EINVAL;
-
-	for (i = 0; i < count; i++) {
-		ret = mxc_iomux_alloc_pin(*p, label);
-		if (ret)
-			goto setup_error;
-		p++;
-	}
-	return 0;
-
-setup_error:
-	mxc_iomux_release_multiple_pins(pin_list, i);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(unsigned int pin)
-{
-	unsigned pad = pin & IOMUX_PADNUM_MASK;
-
-	if (pad < (PIN_MAX + 1))
-		clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
-{
-	const unsigned int *p = pin_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_release_pin(*p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
-{
-	u32 l;
-
-	spin_lock(&gpio_mux_lock);
-	l = __raw_readl(IOMUXGPR);
-	if (en)
-		l |= gp;
-	else
-		l &= ~gp;
-
-	__raw_writel(l, IOMUXGPR);
-	spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_gpr);
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
deleted file mode 100644
index 8e614b10dd5c..000000000000
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * armadillo5x0.c
- *
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * updates in http://alberdroid.blogspot.com/
- *
- * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
- * Based on mx31ads.c and pcm037.c Great Work!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-#include "crm_regs.h"
-
-static int armadillo5x0_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	/* UART2 */
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	/* LAN9118_IRQ */
-	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	/* Framebuffer */
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_DRDY0__DRDY0,
-	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
-	/* I2C2 */
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-	/* OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-	MX31_PIN_USBOTG_STP__USBOTG_STP,
-	/* USB host 2 */
-	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
-};
-
-/* USB */
-
-#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
-#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbotg_init(struct platform_device *pdev)
-{
-	int err;
-
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	/* Chip already enabled by hardware */
-	/* OTG phy reset*/
-	err = gpio_request(OTG_RESET, "USB-OTG-RESET");
-	if (err) {
-		pr_err("Failed to request the usb otg reset gpio\n");
-		return err;
-	}
-
-	err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
-	if (err) {
-		pr_err("Failed to reset the usb otg phy\n");
-		goto otg_free_reset;
-	}
-
-	gpio_set_value(OTG_RESET, 0/*LOW*/);
-	mdelay(5);
-	gpio_set_value(OTG_RESET, 1/*HIGH*/);
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_DIFF_UNI);
-
-otg_free_reset:
-	gpio_free(OTG_RESET);
-	return err;
-}
-
-static int usbh2_init(struct platform_device *pdev)
-{
-	int err;
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-
-	/* Enable the chip */
-	err = gpio_request(USBH2_CS, "USB-H2-CS");
-	if (err) {
-		pr_err("Failed to request the usb host 2 CS gpio\n");
-		return err;
-	}
-
-	err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
-	if (err) {
-		pr_err("Failed to drive the usb host 2 CS gpio\n");
-		goto h2_free_cs;
-	}
-
-	/* H2 phy reset*/
-	err = gpio_request(USBH2_RESET, "USB-H2-RESET");
-	if (err) {
-		pr_err("Failed to request the usb host 2 reset gpio\n");
-		goto h2_free_cs;
-	}
-
-	err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
-	if (err) {
-		pr_err("Failed to reset the usb host 2 phy\n");
-		goto h2_free_reset;
-	}
-
-	gpio_set_value(USBH2_RESET, 0/*LOW*/);
-	mdelay(5);
-	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_DIFF_UNI);
-
-h2_free_reset:
-	gpio_free(USBH2_RESET);
-h2_free_cs:
-	gpio_free(USBH2_CS);
-	return err;
-}
-
-static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
-	.init	= usbotg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/* RTC over I2C*/
-#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
-
-static struct i2c_board_info armadillo5x0_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-/* GPIO BUTTONS */
-static struct gpio_keys_button armadillo5x0_buttons[] = {
-	{
-		.code		= KEY_ENTER, /*28*/
-		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
-		.active_low	= 1,
-		.desc		= "menu",
-		.wakeup		= 1,
-	}, {
-		.code		= KEY_BACK, /*158*/
-		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
-		.active_low	= 1,
-		.desc		= "back",
-		.wakeup		= 1,
-	}
-};
-
-static const struct gpio_keys_platform_data
-		armadillo5x0_button_data __initconst = {
-	.buttons	= armadillo5x0_buttons,
-	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
-};
-
-/*
- * NAND Flash
- */
-static const struct mxc_nand_platform_data
-armadillo5x0_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-};
-
-/*
- * MTD NOR Flash
- */
-static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
-	{
-		.name		= "nor.bootloader",
-		.offset		= 0x00000000,
-		.size		= 4*32*1024,
-	}, {
-		.name		= "nor.kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16*128*1024,
-	}, {
-		.name		= "nor.userland",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 110*128*1024,
-	}, {
-		.name		= "nor.config",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1*128*1024,
-	},
-};
-
-static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
-	.width		= 2,
-	.parts		= armadillo5x0_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
-};
-
-static struct resource armadillo5x0_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= MX31_CS0_BASE_ADDR,
-	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
-};
-
-static struct platform_device armadillo5x0_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &armadillo5x0_nor_flash_resource,
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
-	{	/* 640x480 @ 60 Hz */
-		.name		= "CRT-VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 39721,
-		.left_margin	= 35,
-		.right_margin	= 115,
-		.upper_margin	= 43,
-		.lower_margin	= 1,
-		.hsync_len	= 10,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {/* 800x600 @ 56 Hz */
-		.name		= "CRT-SVGA",
-		.refresh	= 56,
-		.xres		= 800,
-		.yres		= 600,
-		.pixclock	= 30000,
-		.left_margin	= 30,
-		.right_margin	= 108,
-		.upper_margin	= 13,
-		.lower_margin	= 10,
-		.hsync_len	= 10,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
-				  FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "CRT-VGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-/*
- * SDHC 1
- * MMC support
- */
-static int armadillo5x0_sdhc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static int armadillo5x0_sdhc1_init(struct device *dev,
-				   irq_handler_t detect_irq, void *data)
-{
-	int ret;
-	int gpio_det, gpio_wp;
-
-	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
-	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
-
-	ret = gpio_request(gpio_det, "sdhc-card-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(gpio_det);
-
-	ret = gpio_request(gpio_wp, "sdhc-write-protect");
-	if (ret)
-		goto err_gpio_free;
-
-	gpio_direction_input(gpio_wp);
-
-	/* When supported the trigger type have to be BOTH */
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "sdhc-detect", data);
-
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(gpio_wp);
-
-err_gpio_free:
-	gpio_free(gpio_det);
-
-	return ret;
-
-}
-
-static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-	.get_ro = armadillo5x0_sdhc1_get_ro,
-	.init = armadillo5x0_sdhc1_init,
-	.exit = armadillo5x0_sdhc1_exit,
-};
-
-/*
- * SMSC 9118
- * Network support
- */
-static struct resource armadillo5x0_smc911x_resources[] = {
-	{
-		.start	= MX31_CS3_BASE_ADDR,
-		.end	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_16BIT,
-	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device armadillo5x0_smc911x_device = {
-	.name           = "smsc911x",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
-	.resource       = armadillo5x0_smc911x_resources,
-	.dev            = {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-/* UART device data */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&armadillo5x0_smc911x_device,
-};
-
-/*
- * Perform board specific initializations
- */
-static void __init armadillo5x0_init(void)
-{
-	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
-			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx_add_gpio_keys(&armadillo5x0_button_data);
-	imx31_add_imx_i2c1(NULL);
-
-	/* Register UART */
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_imx_uart1(&uart_pdata);
-
-	/* SMSC9118 IRQ pin */
-	gpio_direction_input(MX31_PIN_GPIO1_0);
-
-	/* Register SDHC */
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
-
-	/* Register FB */
-	imx31_add_ipu_core(&mx3_ipu_data);
-	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	/* Register NOR Flash */
-	mxc_register_device(&armadillo5x0_nor_flash,
-			    &armadillo5x0_nor_flash_pdata);
-
-	/* Register NAND Flash */
-	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
-
-	/* set NAND page size to 2k if not configured via boot mode pins */
-	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
-
-	/* RTC */
-	/* Get RTC IRQ and register the chip */
-	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
-			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
-		else
-			gpio_free(ARMADILLO5X0_RTC_GPIO);
-	}
-	if (armadillo5x0_i2c_rtc.irq == 0)
-		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
-	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
-
-	/* USB */
-
-	usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbotg_pdata.otg)
-		imx31_add_mxc_ehci_otg(&usbotg_pdata);
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-static void __init armadillo5x0_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer armadillo5x0_timer = {
-	.init	= armadillo5x0_timer_init,
-};
-
-MACHINE_START(ARMADILLO5X0, "Armadillo-500")
-	/* Maintainer: Alberto Panizzo  */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.timer = &armadillo5x0_timer,
-	.init_machine = armadillo5x0_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-mx3/mach-bug.c
deleted file mode 100644
index 42e4f078a19c..000000000000
--- a/arch/arm/mach-mx3/mach-bug.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <mach/iomux-mx3.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "devices-imx31.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const unsigned int bug_pins[] __initconst = {
-	MX31_PIN_PC_RST__CTS5,
-	MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5,
-	MX31_PIN_PC_BVD1__RXD5,
-};
-
-static void __init bug_board_init(void)
-{
-	mxc_iomux_setup_multiple_pins(bug_pins,
-				      ARRAY_SIZE(bug_pins), "uart-4");
-	imx31_add_imx_uart4(&uart_pdata);
-}
-
-static void __init bug_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer bug_timer = {
-	.init = bug_timer_init,
-};
-
-MACHINE_START(BUG, "BugLabs BUGBase")
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.timer = &bug_timer,
-	.init_machine = bug_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
deleted file mode 100644
index 3f8ef825fa6f..000000000000
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- * Copyright (C) 2009 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-
-#include "devices-imx35.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data
-		eukrea_cpuimx35_i2c0_data __initconst = {
-	.bitrate =		100000,
-};
-
-static struct tsc2007_platform_data tsc2007_info = {
-	.model			= 2007,
-	.x_plate_ohms		= 180,
-};
-
-#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
-static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("tsc2007", 0x48),
-		.type		= "tsc2007",
-		.platform_data	= &tsc2007_info,
-		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
-	},
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-	/* TSC2007 IRQ */
-	MX35_PAD_ATA_DA2__GPIO3_2,
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx35_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
-	.init	= eukrea_cpuimx35_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
-	.init	= eukrea_cpuimx35_usbh1_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI,
-	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx35_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init eukrea_cpuimx35_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
-			ARRAY_SIZE(eukrea_cpuimx35_pads));
-
-	imx35_add_fec(NULL);
-	imx35_add_imx2_wdt(NULL);
-
-	imx35_add_imx_uart0(&uart_pdata);
-	imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
-
-	i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
-			ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
-	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
-
-	if (otg_mode_host)
-		imx35_add_mxc_ehci_otg(&otg_pdata);
-	else
-		imx35_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx35_add_mxc_ehci_hs(&usbh1_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
-	eukrea_mbimxsd35_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx35_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer eukrea_cpuimx35_timer = {
-	.init	= eukrea_cpuimx35_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
-	/* Maintainer: Eukrea Electromatique */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.timer = &eukrea_cpuimx35_timer,
-	.init_machine = eukrea_cpuimx35_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
deleted file mode 100644
index 1ecae20cf4e3..000000000000
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * KZM-ARM11-01 support
- *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- * based on code for MX31ADS,
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/types.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/memory.h>
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-
-#include "devices-imx31.h"
-
-#define KZM_ARM11_IO_ADDRESS(x) (IOMEM(					\
-	IMX_IO_P2V_MODULE(x, MX31_CS4) ?:				\
-	IMX_IO_P2V_MODULE(x, MX31_CS5)) ?:				\
-	MX31_IO_ADDRESS(x))
-
-/*
- *  KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
-
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-/*
- * KZM-ARM11-01 has an external UART on FPGA
- */
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase	= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
-		.mapbase	= KZM_ARM11_16550,
-		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
-		.irqflags	= IRQ_TYPE_EDGE_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 0,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_BUGGY_UART,
-	},
-	{},
-};
-
-static struct resource serial8250_resources[] = {
-	{
-		.start	= KZM_ARM11_16550,
-		.end	= KZM_ARM11_16550 + 0x10,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-				.platform_data = serial_platform_data,
-			  },
-	.num_resources	= ARRAY_SIZE(serial8250_resources),
-	.resource	= serial8250_resources,
-};
-
-static int __init kzm_init_ext_uart(void)
-{
-	u8 tmp;
-
-	/*
-	 * GPIO 1-1: external UART interrupt line
-	 */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
-	/*
-	 * Unmask UART interrupt
-	 */
-	tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
-	tmp |= 0x2;
-	__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
-
-	return platform_device_register(&serial_device);
-}
-#else
-static inline int kzm_init_ext_uart(void)
-{
-	return 0;
-}
-#endif
-
-/*
- * SMSC LAN9118
- */
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-static struct smsc911x_platform_config kzm_smsc9118_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct resource kzm_smsc9118_resources[] = {
-	{
-		.start	= MX31_CS5_BASE_ADDR,
-		.end	= MX31_CS5_BASE_ADDR + SZ_128K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device kzm_smsc9118_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(kzm_smsc9118_resources),
-	.resource	= kzm_smsc9118_resources,
-	.dev		= {
-				.platform_data = &kzm_smsc9118_config,
-			  },
-};
-
-static int __init kzm_init_smsc9118(void)
-{
-	/*
-	 * GPIO 1-2: SMSC9118 interrupt line
-	 */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
-
-	return platform_device_register(&kzm_smsc9118_device);
-}
-#else
-static inline int kzm_init_smsc9118(void)
-{
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init kzm_init_imx_uart(void)
-{
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_imx_uart1(&uart_pdata);
-}
-#else
-static inline void kzm_init_imx_uart(void)
-{
-}
-#endif
-
-static int kzm_pins[] __initdata = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	MX31_PIN_DCD_DCE1__DCD_DCE1,
-	MX31_PIN_RI_DCE1__RI_DCE1,
-	MX31_PIN_DSR_DCE1__DSR_DCE1,
-	MX31_PIN_DTR_DCE1__DTR_DCE1,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_DCD_DTE1__DCD_DTE2,
-	MX31_PIN_RI_DTE1__RI_DTE2,
-	MX31_PIN_DSR_DTE1__DSR_DTE2,
-	MX31_PIN_DTR_DTE1__DTR_DTE2,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init kzm_board_init(void)
-{
-	mxc_iomux_setup_multiple_pins(kzm_pins,
-				      ARRAY_SIZE(kzm_pins), "kzm");
-	kzm_init_ext_uart();
-	kzm_init_smsc9118();
-	kzm_init_imx_uart();
-
-	pr_info("Clock input source is 26MHz\n");
-}
-
-/*
- * This structure defines static mappings for the kzm-arm11-01 board.
- */
-static struct map_desc kzm_io_desc[] __initdata = {
-	{
-		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
-		.length		= MX31_CS4_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
-		.length		= MX31_CS5_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init kzm_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
-}
-
-static void __init kzm_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer kzm_timer = {
-	.init = kzm_timer_init,
-};
-
-MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = kzm_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.timer = &kzm_timer,
-	.init_machine = kzm_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
deleted file mode 100644
index 9b982449cb52..000000000000
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ /dev/null
@@ -1,771 +0,0 @@
-/*
- *  Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/l4f00242t03.h>
-#include <linux/regulator/machine.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/memblock.h>
-
-#include <media/soc_camera.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/3ds_debugboard.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
-static int mx31_3ds_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
-	/*SPI0*/
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
-	/* SPI 1 */
-	MX31_PIN_CSPI2_SCLK__SCLK,
-	MX31_PIN_CSPI2_MOSI__MOSI,
-	MX31_PIN_CSPI2_MISO__MISO,
-	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS0__SS0,
-	MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
-	/* MC13783 IRQ */
-	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
-	/* USB OTG reset */
-	IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-	MX31_PIN_USBOTG_STP__USBOTG_STP,
-	/*Keyboard*/
-	MX31_PIN_KEY_ROW0_KEY_ROW0,
-	MX31_PIN_KEY_ROW1_KEY_ROW1,
-	MX31_PIN_KEY_ROW2_KEY_ROW2,
-	MX31_PIN_KEY_COL0_KEY_COL0,
-	MX31_PIN_KEY_COL1_KEY_COL1,
-	MX31_PIN_KEY_COL2_KEY_COL2,
-	MX31_PIN_KEY_COL3_KEY_COL3,
-	/* USB Host 2 */
-	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
-	/* USB Host2 reset */
-	IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
-	/* I2C1 */
-	MX31_PIN_I2C_CLK__I2C1_SCL,
-	MX31_PIN_I2C_DAT__I2C1_SDA,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
-	MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
-	/* Framebuffer */
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_CONTRAST__CONTRAST,
-	/* CSI */
-	MX31_PIN_CSI_D6__CSI_D6,
-	MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8,
-	MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10,
-	MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12,
-	MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14,
-	MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
-	MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
-	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
-	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
-};
-
-/*
- * Camera support
- */
-static phys_addr_t mx3_camera_base __initdata;
-#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M
-
-#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
-#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1)
-
-static struct gpio mx31_3ds_camera_gpios[] = {
-	{ MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" },
-	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
-};
-
-static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
-	.flags = MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz = 2600,
-};
-
-static int __init mx31_3ds_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev =
-		imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	if (!mx3_camera_base)
-		goto err;
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX31_3DS_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
-static int mx31_3ds_camera_power(struct device *dev, int on)
-{
-	/* enable or disable the camera */
-	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1);
-
-	if (!on)
-		goto out;
-
-	/* If enabled, give a reset impulse */
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0);
-	msleep(20);
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1);
-	msleep(100);
-
-out:
-	return 0;
-}
-
-static struct i2c_board_info mx31_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct regulator_bulk_data mx31_3ds_camera_regs[] = {
-	{ .supply = "cmos_vcore" },
-	{ .supply = "cmos_2v8" },
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx31_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= mx31_3ds_camera_power,
-	.regulators	= mx31_3ds_camera_regs,
-	.num_regulators	= ARRAY_SIZE(mx31_3ds_camera_regs),
-};
-
-static struct platform_device mx31_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
-	{	/* 480x640 @ 60 Hz */
-		.name		= "Epson-VGA",
-		.refresh	= 60,
-		.xres		= 480,
-		.yres		= 640,
-		.pixclock	= 41701,
-		.left_margin	= 20,
-		.right_margin	= 41,
-		.upper_margin	= 10,
-		.lower_margin	= 5,
-		.hsync_len	= 20,
-		.vsync_len	= 10,
-		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static struct ipu_platform_data mx3_ipu_data = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "Epson-VGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-/* LCD */
-static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
-	.reset_gpio		= IOMUX_TO_GPIO(MX31_PIN_LCS1),
-	.data_enable_gpio	= IOMUX_TO_GPIO(MX31_PIN_SER_RS),
-	.core_supply		= "lcd_2v8",
-	.io_supply		= "vdd_lcdio",
-};
-
-/*
- * Support for SD card slot in personality board
- */
-#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-
-static struct gpio mx31_3ds_sdhc1_gpios[] = {
-	{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
-	{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
-};
-
-static int mx31_3ds_sdhc1_init(struct device *dev,
-			       irq_handler_t detect_irq,
-			       void *data)
-{
-	int ret;
-
-	ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
-				 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
-	if (ret) {
-		pr_warning("Unable to request the SD/MMC GPIOs.\n");
-		return ret;
-	}
-
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
-			  detect_irq, IRQF_DISABLED |
-			  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			  "sdhc1-detect", data);
-	if (ret) {
-		pr_warning("Unable to request the SD/MMC card-detect IRQ.\n");
-		goto gpio_free;
-	}
-
-	return 0;
-
-gpio_free:
-	gpio_free_array(mx31_3ds_sdhc1_gpios,
-			ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
-	return ret;
-}
-
-static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data);
-	gpio_free_array(mx31_3ds_sdhc1_gpios,
-			 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
-}
-
-static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
-{
-	/*
-	 * While the voltage stuff is done by the driver, activate the
-	 * Buffer Enable Pin only if there is a card in slot to fix the card
-	 * voltage issue caused by bi-directional chip TXB0108 on 3Stack.
-	 * Done here because at this stage we have for sure a debounced value
-	 * of the presence of the card, showed by the value of vdd.
-	 * 7 == ilog2(MMC_VDD_165_195)
-	 */
-	if (vdd > 7)
-		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
-	else
-		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
-	.init		= mx31_3ds_sdhc1_init,
-	.exit		= mx31_3ds_sdhc1_exit,
-	.setpower	= mx31_3ds_sdhc1_setpower,
-};
-
-/*
- * Matrix keyboard
- */
-
-static const uint32_t mx31_3ds_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_ENTER),
-	KEY(2, 0, KEY_F6),
-	KEY(2, 1, KEY_F8),
-	KEY(2, 2, KEY_F9),
-	KEY(2, 3, KEY_F10),
-};
-
-static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
-	.keymap		= mx31_3ds_keymap,
-	.keymap_size	= ARRAY_SIZE(mx31_3ds_keymap),
-};
-
-/* Regulators */
-static struct regulator_init_data pwgtx_init = {
-	.constraints = {
-		.boot_on	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data gpo_init = {
-	.constraints = {
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_consumer_supply vmmc2_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"),
-};
-
-static struct regulator_init_data vmmc2_init = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
-	.consumer_supplies = vmmc2_consumers,
-};
-
-static struct regulator_consumer_supply vmmc1_consumers[] = {
-	REGULATOR_SUPPLY("lcd_2v8", NULL),
-	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vmmc1_init = {
-	.constraints = {
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
-	.consumer_supplies = vmmc1_consumers,
-};
-
-static struct regulator_consumer_supply vgen_consumers[] = {
-	REGULATOR_SUPPLY("vdd_lcdio", NULL),
-};
-
-static struct regulator_init_data vgen_init = {
-	.constraints = {
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
-	.consumer_supplies = vgen_consumers,
-};
-
-static struct regulator_consumer_supply vvib_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vvib_init = {
-	.constraints = {
-		.min_uV = 1300000,
-		.max_uV = 1300000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
-	.consumer_supplies = vvib_consumers,
-};
-
-static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
-	{
-		.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
-		.init_data = &pwgtx_init,
-	}, {
-		.id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
-		.init_data = &pwgtx_init,
-	}, {
-
-		.id = MC13783_REG_GPO1, /* Turn on 1.8V */
-		.init_data = &gpo_init,
-	}, {
-		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
-		.init_data = &gpo_init,
-	}, {
-		.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
-		.init_data = &vmmc2_init,
-	}, {
-		.id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
-		.init_data = &vmmc1_init,
-	}, {
-		.id = MC13783_REG_VGEN,  /* Power LCD */
-		.init_data = &vgen_init,
-	}, {
-		.id = MC13783_REG_VVIB,  /* Power CMOS */
-		.init_data = &vvib_init,
-	},
-};
-
-/* MC13783 */
-static struct mc13xxx_platform_data mc13783_pdata = {
-	.regulators = {
-		.regulators = mx31_3ds_regulators,
-		.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
-	},
-	.flags  = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
-};
-
-/* SPI */
-static int spi0_internal_chipselect[] = {
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.chipselect	= spi0_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi0_internal_chipselect),
-};
-
-static int spi1_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi1_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
-};
-
-static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
-	{
-		.modalias	= "mc13783",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 1,
-		.chip_select	= 1, /* SS2 */
-		.platform_data	= &mc13783_pdata,
-		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-		.mode = SPI_CS_HIGH,
-	}, {
-		.modalias	= "l4f00242t03",
-		.max_speed_hz	= 5000000,
-		.bus_num	= 0,
-		.chip_select	= 0, /* SS2 */
-		.platform_data	= &mx31_3ds_l4f00242t03_pdata,
-	},
-};
-
-/*
- * NAND Flash
- */
-static const struct mxc_nand_platform_data
-mx31_3ds_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
-	.flash_bbt	= 1,
-#endif
-};
-
-/*
- * USB OTG
- */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-		     PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
-#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
-
-static int mx31_3ds_usbotg_init(void)
-{
-	int err;
-
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	err = gpio_request(USBOTG_RST_B, "otgusb-reset");
-	if (err) {
-		pr_err("Failed to request the USB OTG reset gpio\n");
-		return err;
-	}
-
-	err = gpio_direction_output(USBOTG_RST_B, 0);
-	if (err) {
-		pr_err("Failed to drive the USB OTG reset gpio\n");
-		goto usbotg_free_reset;
-	}
-
-	mdelay(1);
-	gpio_set_value(USBOTG_RST_B, 1);
-	return 0;
-
-usbotg_free_reset:
-	gpio_free(USBOTG_RST_B);
-	return err;
-}
-
-static int mx31_3ds_otg_init(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static int mx31_3ds_host2_init(struct platform_device *pdev)
-{
-	int err;
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
-
-	err = gpio_request(USBH2_RST_B, "usbh2-reset");
-	if (err) {
-		pr_err("Failed to request the USB Host 2 reset gpio\n");
-		return err;
-	}
-
-	err = gpio_direction_output(USBH2_RST_B, 0);
-	if (err) {
-		pr_err("Failed to drive the USB Host 2 reset gpio\n");
-		goto usbotg_free_reset;
-	}
-
-	mdelay(1);
-	gpio_set_value(USBH2_RST_B, 1);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-
-usbotg_free_reset:
-	gpio_free(USBH2_RST_B);
-	return err;
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= mx31_3ds_otg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init = mx31_3ds_host2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init mx31_3ds_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", mx31_3ds_otg_mode);
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mx31_3ds_ov2640,
-};
-
-static void __init mx31_3ds_init(void)
-{
-	int ret;
-
-	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
-				      "mx31_3ds");
-
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
-
-	imx31_add_spi_imx1(&spi1_pdata);
-	spi_register_board_info(mx31_3ds_spi_devs,
-						ARRAY_SIZE(mx31_3ds_spi_devs));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
-
-	mx31_3ds_usbotg_init();
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx31_add_mxc_ehci_otg(&otg_pdata);
-	}
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	if (!otg_mode_host)
-		imx31_add_fsl_usb2_udc(&usbotg_pdata);
-
-	if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
-		printk(KERN_WARNING "Init of the debug board failed, all "
-				    "devices on the debug board are unusable.\n");
-	imx31_add_imx2_wdt(NULL);
-	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
-	imx31_add_mxc_mmc(0, &sdhc1_pdata);
-
-	imx31_add_spi_imx0(&spi0_pdata);
-	imx31_add_ipu_core(&mx3_ipu_data);
-	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request_array(mx31_3ds_camera_gpios,
-				 ARRAY_SIZE(mx31_3ds_camera_gpios));
-	if (ret) {
-		pr_err("Failed to request camera gpios");
-		iclink_ov2640.power = NULL;
-	}
-
-	mx31_3ds_init_camera();
-}
-
-static void __init mx31_3ds_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31_3ds_timer = {
-	.init	= mx31_3ds_timer_init,
-};
-
-static void __init mx31_3ds_reserve(void)
-{
-	/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
-	mx3_camera_base = memblock_alloc(MX31_3DS_CAMERA_BUF_SIZE,
-					 MX31_3DS_CAMERA_BUF_SIZE);
-	memblock_free(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE);
-	memblock_remove(mx3_camera_base, MX31_3DS_CAMERA_BUF_SIZE);
-}
-
-MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.timer = &mx31_3ds_timer,
-	.init_machine = mx31_3ds_init,
-	.reserve = mx31_3ds_reserve,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
deleted file mode 100644
index f4dee0254634..000000000000
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/board-mx31ads.h>
-#include <mach/iomux-mx3.h>
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#include <linux/mfd/wm8350/audio.h>
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#include "devices-imx31.h"
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS           0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS      0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET         0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR       0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA      0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB      0x010010
-
-#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-/*
- * The serial port definition structure.
- */
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
-		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
-		.irq      = EXPIO_INT_XUART_INTA,
-		.uartclk  = 14745600,
-		.regshift = 0,
-		.iotype   = UPIO_MEM,
-		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
-	}, {
-		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
-		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
-		.irq      = EXPIO_INT_XUART_INTB,
-		.uartclk  = 14745600,
-		.regshift = 0,
-		.iotype   = UPIO_MEM,
-		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
-	},
-	{},
-};
-
-static struct platform_device serial_device = {
-	.name	= "serial8250",
-	.id	= 0,
-	.dev	= {
-		.platform_data = serial_platform_data,
-	},
-};
-
-static int __init mxc_init_extuart(void)
-{
-	return platform_device_register(&serial_device);
-}
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static unsigned int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
-};
-
-static inline void mxc_init_imx_uart(void)
-{
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	imx31_add_imx_uart0(&uart_pdata);
-}
-
-static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
-{
-	u32 imr_val;
-	u32 int_valid;
-	u32 expio_irq;
-
-	imr_val = __raw_readw(PBC_INTMASK_SET_REG);
-	int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
-
-	expio_irq = MXC_EXP_IO_BASE;
-	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
-		if ((int_valid & 1) == 0)
-			continue;
-
-		generic_handle_irq(expio_irq);
-	}
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param d	an expio virtual irq description
- */
-static void expio_mask_irq(struct irq_data *d)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
-	/* mask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
-	__raw_readw(PBC_INTMASK_CLEAR_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param d	an expio virtual irq description
- */
-static void expio_ack_irq(struct irq_data *d)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
-	/* clear the interrupt status */
-	__raw_writew(1 << expio, PBC_INTSTATUS_REG);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param d	an expio virtual irq description
- */
-static void expio_unmask_irq(struct irq_data *d)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
-	/* unmask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
-	.name = "EXPIO(CPLD)",
-	.irq_ack = expio_ack_irq,
-	.irq_mask = expio_mask_irq,
-	.irq_unmask = expio_unmask_irq,
-};
-
-static void __init mx31ads_init_expio(void)
-{
-	int i;
-
-	printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
-
-	/*
-	 * Configure INT line as GPIO input
-	 */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
-
-	/* disable the interrupt and clear the status */
-	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
-	__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
-	for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
-	     i++) {
-		irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
-	irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
-}
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-/* This section defines setup for the Wolfson Microelectronics
- * 1133-EV1 PMU/audio board.  When other PMU boards are supported the
- * regulator definitions may be shared with them, but for now they can
- * only be used with this board so would generate warnings about
- * unused statics and some of the configuration is specific to this
- * module.
- */
-
-/* CPU */
-static struct regulator_consumer_supply sw1a_consumers[] = {
-	{
-		.supply = "cpu_vcc",
-	}
-};
-
-static struct regulator_init_data sw1a_data = {
-	.constraints = {
-		.name = "SW1A",
-		.min_uV = 1275000,
-		.max_uV = 1600000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_MODE,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-				    REGULATOR_MODE_FAST,
-		.state_mem = {
-			 .uV = 1400000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
-	.consumer_supplies = sw1a_consumers,
-};
-
-/* System IO - High */
-static struct regulator_init_data viohi_data = {
-	.constraints = {
-		.name = "VIOHO",
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-		.state_mem = {
-			 .uV = 2800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-/* System IO - Low */
-static struct regulator_init_data violo_data = {
-	.constraints = {
-		.name = "VIOLO",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-/* DDR RAM */
-static struct regulator_init_data sw2a_data = {
-	.constraints = {
-		.name = "SW2A",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.state_disk = {
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 0,
-		 },
-		.always_on = 1,
-		.boot_on = 1,
-		.initial_state = PM_SUSPEND_MEM,
-	},
-};
-
-static struct regulator_init_data ldo1_data = {
-	.constraints = {
-		.name = "VCAM/VMMC1/VMMC2",
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.apply_uV = 1,
-	},
-};
-
-static struct regulator_consumer_supply ldo2_consumers[] = {
-	{ .supply = "AVDD", .dev_name = "1-001a" },
-	{ .supply = "HPVDD", .dev_name = "1-001a" },
-};
-
-/* CODEC and SIM */
-static struct regulator_init_data ldo2_data = {
-	.constraints = {
-		.name = "VESIM/VSIM/AVDD",
-		.min_uV = 3300000,
-		.max_uV = 3300000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
-	.consumer_supplies = ldo2_consumers,
-};
-
-/* General */
-static struct regulator_init_data vdig_data = {
-	.constraints = {
-		.name = "VDIG",
-		.min_uV = 1500000,
-		.max_uV = 1500000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.apply_uV = 1,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-/* Tranceivers */
-static struct regulator_init_data ldo4_data = {
-	.constraints = {
-		.name = "VRF1/CVDD_2.775",
-		.min_uV = 2500000,
-		.max_uV = 2500000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.apply_uV = 1,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-static struct wm8350_led_platform_data wm8350_led_data = {
-	.name            = "wm8350:white",
-	.default_trigger = "heartbeat",
-	.max_uA          = 27899,
-};
-
-static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
-	.vmid_discharge_msecs = 1000,
-	.drain_msecs = 30,
-	.cap_discharge_msecs = 700,
-	.vmid_charge_msecs = 700,
-	.vmid_s_curve = WM8350_S_CURVE_SLOW,
-	.dis_out4 = WM8350_DISCHARGE_SLOW,
-	.dis_out3 = WM8350_DISCHARGE_SLOW,
-	.dis_out2 = WM8350_DISCHARGE_SLOW,
-	.dis_out1 = WM8350_DISCHARGE_SLOW,
-	.vroi_out4 = WM8350_TIE_OFF_500R,
-	.vroi_out3 = WM8350_TIE_OFF_500R,
-	.vroi_out2 = WM8350_TIE_OFF_500R,
-	.vroi_out1 = WM8350_TIE_OFF_500R,
-	.vroi_enable = 0,
-	.codec_current_on = WM8350_CODEC_ISEL_1_0,
-	.codec_current_standby = WM8350_CODEC_ISEL_0_5,
-	.codec_current_charge = WM8350_CODEC_ISEL_1_5,
-};
-
-static int mx31_wm8350_init(struct wm8350 *wm8350)
-{
-	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
-			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_ON);
-
-	wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_ON);
-
-	wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
-			   WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
-			   WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
-			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
-			   WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
-			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
-	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
-	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
-	wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
-
-	/* LEDs */
-	wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
-			     WM8350_DC5_ERRACT_SHUTDOWN_CONV);
-	wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
-			       WM8350_ISINK_FLASH_DISABLE,
-			       WM8350_ISINK_FLASH_TRIG_BIT,
-			       WM8350_ISINK_FLASH_DUR_32MS,
-			       WM8350_ISINK_FLASH_ON_INSTANT,
-			       WM8350_ISINK_FLASH_OFF_INSTANT,
-			       WM8350_ISINK_FLASH_MODE_EN);
-	wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
-			       WM8350_ISINK_MODE_BOOST,
-			       WM8350_ISINK_ILIM_NORMAL,
-			       WM8350_DC5_RMP_20V,
-			       WM8350_DC5_FBSRC_ISINKA);
-	wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
-			    &wm8350_led_data);
-
-	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
-
-	regulator_has_full_constraints();
-
-	return 0;
-}
-
-static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
-	.init = mx31_wm8350_init,
-	.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
-};
-#endif
-
-static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-	{
-		I2C_BOARD_INFO("wm8350", 0x1a),
-		.platform_data = &mx31_wm8350_pdata,
-		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-	},
-#endif
-};
-
-static void mxc_init_i2c(void)
-{
-	i2c_register_board_info(1, mx31ads_i2c1_devices,
-				ARRAY_SIZE(mx31ads_i2c1_devices));
-
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
-
-	imx31_add_imx_i2c1(NULL);
-}
-
-static unsigned int ssi_pins[] = {
-	MX31_PIN_SFS5__SFS5,
-	MX31_PIN_SCK5__SCK5,
-	MX31_PIN_SRXD5__SRXD5,
-	MX31_PIN_STXD5__STXD5,
-};
-
-static void mxc_init_audio(void)
-{
-	imx31_add_imx_ssi(0, NULL);
-	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
-}
-
-/* static mappings */
-static struct map_desc mx31ads_io_desc[] __initdata = {
-	{
-		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
-		.length		= MX31_CS4_SIZE / 2,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init mx31ads_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
-}
-
-static void __init mx31ads_init_irq(void)
-{
-	mx31_init_irq();
-	mx31ads_init_expio();
-}
-
-static void __init mx31ads_init(void)
-{
-	mxc_init_extuart();
-	mxc_init_imx_uart();
-	mxc_init_i2c();
-	mxc_init_audio();
-}
-
-static void __init mx31ads_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31ads_timer = {
-	.init	= mx31ads_timer_init,
-};
-
-MACHINE_START(MX31ADS, "Freescale MX31ADS")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = mx31ads_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31ads_init_irq,
-	.timer = &mx31ads_timer,
-	.init_machine = mx31ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
deleted file mode 100644
index 410e676ae087..000000000000
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- *  LILLY-1131 module support
- *
- *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- *  based on code for other MX31 boards,
- *
- *    Copyright 2005-2007 Freescale Semiconductor
- *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-/*
- * This file contains module-specific initialization routines for LILLY-1131.
- * Initialization of peripherals found on the baseboard is implemented in the
- * appropriate baseboard support code.
- */
-
-/* SMSC ethernet support */
-
-static struct resource smsc91x_resources[] = {
-	{
-		.start	= MX31_CS4_BASE_ADDR,
-		.end	= MX31_CS4_BASE_ADDR + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_32BIT |
-			  SMSC911X_SAVE_MAC_ADDRESS |
-			  SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc91x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc91x_resources),
-	.resource	= smsc91x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	}
-};
-
-/* NOR flash */
-static struct physmap_flash_data nor_flash_data = {
-	.width  = 2,
-};
-
-static struct resource nor_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &nor_flash_data,
-	},
-	.resource = &nor_flash_resource,
-	.num_resources = 1,
-};
-
-/* USB */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh1_init(struct platform_device *pdev)
-{
-	int pins[] = {
-		MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
-		MX31_PIN_CSPI1_MISO__USBH1_RXDP,
-		MX31_PIN_CSPI1_SS0__USBH1_TXDM,
-		MX31_PIN_CSPI1_SS1__USBH1_TXDP,
-		MX31_PIN_CSPI1_SS2__USBH1_RCV,
-		MX31_PIN_CSPI1_SCLK__USBH1_OEB,
-		MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
-	};
-
-	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
-
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-static int usbh2_init(struct platform_device *pdev)
-{
-	int pins[] = {
-		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
-		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
-		MX31_PIN_USBH2_CLK__USBH2_CLK,
-		MX31_PIN_USBH2_DIR__USBH2_DIR,
-		MX31_PIN_USBH2_NXT__USBH2_NXT,
-		MX31_PIN_USBH2_STP__USBH2_STP,
-	};
-
-	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-	/* chip select */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
-				"USBH2_CS");
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
-	.init	= usbh1_init,
-	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static void lilly1131_usb_init(void)
-{
-	imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-/* SPI */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(1),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.chipselect = spi_internal_chipselect,
-	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect = spi_internal_chipselect,
-	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct mc13xxx_platform_data mc13783_pdata __initdata = {
-	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info mc13783_dev __initdata = {
-	.modalias	= "mc13783",
-	.max_speed_hz	= 1000000,
-	.bus_num	= 1,
-	.chip_select	= 0,
-	.platform_data	= &mc13783_pdata,
-	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-};
-
-static struct platform_device *devices[] __initdata = {
-	&smsc91x_device,
-	&physmap_flash_device,
-};
-
-static int mx31lilly_baseboard;
-core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
-
-static void __init mx31lilly_board_init(void)
-{
-	switch (mx31lilly_baseboard) {
-	case MX31LILLY_NOBOARD:
-		break;
-	case MX31LILLY_DB:
-		mx31lilly_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
-			mx31lilly_baseboard);
-	}
-
-	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-
-	/* SPI */
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
-
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
-
-	imx31_add_spi_imx0(&spi0_pdata);
-	imx31_add_spi_imx1(&spi1_pdata);
-	spi_register_board_info(&mc13783_dev, 1);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* USB */
-	lilly1131_usb_init();
-}
-
-static void __init mx31lilly_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31lilly_timer = {
-	.init	= mx31lilly_timer_init,
-};
-
-MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.timer = &mx31lilly_timer,
-	.init_machine = mx31lilly_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
deleted file mode 100644
index ac9b4cad320e..000000000000
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/board-mx31lite.h>
-#include <mach/iomux-mx3.h>
-#include <mach/irqs.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-/*
- * This file contains the module-specific initialization routines.
- */
-
-static unsigned int mx31lite_pins[] = {
-	/* LAN9117 IRQ pin */
-	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
-	/* SPI 1 */
-	MX31_PIN_CSPI2_SCLK__SCLK,
-	MX31_PIN_CSPI2_MOSI__MOSI,
-	MX31_PIN_CSPI2_MISO__MISO,
-	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS0__SS0,
-	MX31_PIN_CSPI2_SS1__SS1,
-	MX31_PIN_CSPI2_SS2__SS2,
-};
-
-static const struct mxc_nand_platform_data
-mx31lite_nand_board_info __initconst  = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= MX31_CS4_BASE_ADDR,
-		.end		= MX31_CS4_BASE_ADDR + 0x100,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
-		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smsc911x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	},
-};
-
-/*
- * SPI
- *
- * The MC13783 is the only hard-wired SPI device on the module.
- */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct mc13xxx_platform_data mc13783_pdata __initdata = {
-	.flags  = MC13XXX_USE_RTC |
-		  MC13XXX_USE_REGULATOR,
-};
-
-static struct spi_board_info mc13783_spi_dev __initdata = {
-	.modalias       = "mc13783",
-	.max_speed_hz   = 1000000,
-	.bus_num	= 1,
-	.chip_select    = 0,
-	.platform_data  = &mc13783_pdata,
-	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-};
-
-/*
- * USB
- */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh2_init(struct platform_device *pdev)
-{
-	int pins[] = {
-		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
-		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
-		MX31_PIN_USBH2_CLK__USBH2_CLK,
-		MX31_PIN_USBH2_DIR__USBH2_DIR,
-		MX31_PIN_USBH2_NXT__USBH2_NXT,
-		MX31_PIN_USBH2_STP__USBH2_STP,
-	};
-
-	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-	/* chip select */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
-				"USBH2_CS");
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init   = usbh2_init,
-	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/*
- * NOR flash
- */
-
-static struct physmap_flash_data nor_flash_data = {
-	.width  = 2,
-};
-
-static struct resource nor_flash_resource = {
-	.start  = 0xa0000000,
-	.end    = 0xa1ffffff,
-	.flags  = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
-	.name   = "physmap-flash",
-	.id     = 0,
-	.dev    = {
-		.platform_data  = &nor_flash_data,
-	},
-	.resource = &nor_flash_resource,
-	.num_resources = 1,
-};
-
-
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31lite_io_desc[] __initdata = {
-	{
-		.virtual = MX31_CS4_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
-		.length = MX31_CS4_SIZE,
-		.type = MT_DEVICE
-	}
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init mx31lite_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
-}
-
-static int mx31lite_baseboard;
-core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
-
-static void __init mx31lite_init(void)
-{
-	int ret;
-
-	switch (mx31lite_baseboard) {
-	case MX31LITE_NOBOARD:
-		break;
-	case MX31LITE_DB:
-		mx31lite_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
-				mx31lite_baseboard);
-	}
-
-	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
-				      "mx31lite");
-
-	/* NOR and NAND flash */
-	platform_device_register(&physmap_flash_device);
-	imx31_add_mxc_nand(&mx31lite_nand_board_info);
-
-	imx31_add_spi_imx1(&spi1_pdata);
-	spi_register_board_info(&mc13783_spi_dev, 1);
-
-	/* USB */
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	/* SMSC9117 IRQ pin */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else {
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
-		platform_device_register(&smsc911x_device);
-	}
-}
-
-static void __init mx31lite_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-struct sys_timer mx31lite_timer = {
-	.init	= mx31lite_timer_init,
-};
-
-MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = mx31lite_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.timer = &mx31lite_timer,
-	.init_machine = mx31lite_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
deleted file mode 100644
index eaaea2dbd4fd..000000000000
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ /dev/null
@@ -1,583 +0,0 @@
-/*
- *  Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/gfp.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/types.h>
-#include <linux/memblock.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-static unsigned int moboard_pins[] = {
-	/* UART0 */
-	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
-	MX31_PIN_CTS1__GPIO2_7,
-	/* UART4 */
-	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
-	/* I2C0 */
-	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
-	/* I2C1 */
-	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
-	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
-	/* USB reset */
-	MX31_PIN_GPIO1_0__GPIO1_0,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
-	/* USB H2 */
-	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
-	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
-	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
-	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
-	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
-	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
-	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
-	MX31_PIN_SCK6__GPIO1_25,
-	/* LEDs */
-	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
-	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
-	/* SPI1 */
-	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
-	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
-	/* Atlas IRQ */
-	MX31_PIN_GPIO1_3__GPIO1_3,
-	/* SPI2 */
-	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
-	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
-};
-
-static struct physmap_flash_data mx31moboard_flash_data = {
-	.width  	= 2,
-};
-
-static struct resource mx31moboard_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device mx31moboard_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &mx31moboard_flash_data,
-	},
-	.resource = &mx31moboard_flash_resource,
-	.num_resources = 1,
-};
-
-static int moboard_uart0_init(struct platform_device *pdev)
-{
-	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-	if (ret)
-		return ret;
-
-	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
-	if (ret)
-		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
-
-	return ret;
-}
-
-static void moboard_uart0_exit(struct platform_device *pdev)
-{
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
-}
-
-static const struct imxuart_platform_data uart0_pdata __initconst = {
-	.init = moboard_uart0_init,
-	.exit = moboard_uart0_exit,
-};
-
-static const struct imxuart_platform_data uart4_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
-	.bitrate = 400000,
-};
-
-static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static int moboard_spi1_cs[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master moboard_spi1_pdata __initconst = {
-	.chipselect	= moboard_spi1_cs,
-	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
-};
-
-static struct regulator_consumer_supply sdhc_consumers[] = {
-	{
-		.dev_name = "mxc-mmc.0",
-		.supply	= "sdhc0_vcc",
-	},
-	{
-		.dev_name = "mxc-mmc.1",
-		.supply	= "sdhc1_vcc",
-	},
-};
-
-static struct regulator_init_data sdhc_vreg_data = {
-	.constraints = {
-		.min_uV = 2700000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
-	.consumer_supplies = sdhc_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
-	{
-		.dev_name = "mx3_camera.0",
-		.supply = "cam_vcc",
-	},
-};
-
-static struct regulator_init_data cam_vreg_data = {
-	.constraints = {
-		.min_uV = 2700000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
-	.consumer_supplies = cam_consumers,
-};
-
-static struct mc13xxx_regulator_init_data moboard_regulators[] = {
-	{
-		.id = MC13783_REG_VMMC1,
-		.init_data = &sdhc_vreg_data,
-	},
-	{
-		.id = MC13783_REG_VCAM,
-		.init_data = &cam_vreg_data,
-	},
-};
-
-static struct mc13783_led_platform_data moboard_led[] = {
-	{
-		.id = MC13783_LED_R1,
-		.name = "coreboard-led-4:red",
-		.max_current = 2,
-	},
-	{
-		.id = MC13783_LED_G1,
-		.name = "coreboard-led-4:green",
-		.max_current = 2,
-	},
-	{
-		.id = MC13783_LED_B1,
-		.name = "coreboard-led-4:blue",
-		.max_current = 2,
-	},
-	{
-		.id = MC13783_LED_R2,
-		.name = "coreboard-led-5:red",
-		.max_current = 3,
-	},
-	{
-		.id = MC13783_LED_G2,
-		.name = "coreboard-led-5:green",
-		.max_current = 3,
-	},
-	{
-		.id = MC13783_LED_B2,
-		.name = "coreboard-led-5:blue",
-		.max_current = 3,
-	},
-};
-
-static struct mc13783_leds_platform_data moboard_leds = {
-	.num_leds = ARRAY_SIZE(moboard_led),
-	.led = moboard_led,
-	.flags = MC13783_LED_SLEWLIMTC,
-	.abmode = MC13783_LED_AB_DISABLED,
-	.tc1_period = MC13783_LED_PERIOD_10MS,
-	.tc2_period = MC13783_LED_PERIOD_10MS,
-};
-
-static struct mc13xxx_platform_data moboard_pmic = {
-	.regulators = {
-		.regulators = moboard_regulators,
-		.num_regulators = ARRAY_SIZE(moboard_regulators),
-	},
-	.leds = &moboard_leds,
-	.flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC |
-		MC13XXX_USE_ADC | MC13XXX_USE_LED,
-};
-
-static struct spi_board_info moboard_spi_board_info[] __initdata = {
-	{
-		.modalias = "mc13783",
-		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-		.max_speed_hz = 300000,
-		.bus_num = 1,
-		.chip_select = 0,
-		.platform_data = &moboard_pmic,
-		.mode = SPI_CS_HIGH,
-	},
-};
-
-static int moboard_spi2_cs[] = {
-	MXC_SPI_CS(1),
-};
-
-static const struct spi_imx_master moboard_spi2_pdata __initconst = {
-	.chipselect	= moboard_spi2_cs,
-	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
-};
-
-#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
-#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
-
-static int moboard_sdhc1_get_ro(struct device *dev)
-{
-	return !gpio_get_value(SDHC1_WP);
-}
-
-static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC1_CD, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC1_CD);
-
-	ret = gpio_request(SDHC1_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC1_WP);
-
-	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"sdhc1-card-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(SDHC1_WP);
-err_gpio_free:
-	gpio_free(SDHC1_CD);
-
-	return ret;
-}
-
-static void moboard_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(SDHC1_CD), data);
-	gpio_free(SDHC1_WP);
-	gpio_free(SDHC1_CD);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
-	.get_ro	= moboard_sdhc1_get_ro,
-	.init	= moboard_sdhc1_init,
-	.exit	= moboard_sdhc1_exit,
-};
-
-/*
- * this pin is dedicated for all mx31moboard systems, so we do it here
- */
-#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-		      PAD_CTL_ODE_CMOS)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static void usb_xcvr_reset(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-	gpio_request(USBH2_EN_B, "usbh2-en");
-	gpio_direction_output(USBH2_EN_B, 0);
-
-	gpio_request(USB_RESET_B, "usb-reset");
-	gpio_direction_output(USB_RESET_B, 0);
-	mdelay(1);
-	gpio_set_value(USB_RESET_B, 1);
-	mdelay(1);
-}
-
-static int moboard_usbh2_init_hw(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= moboard_usbh2_init_hw,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static int __init moboard_usbh2_init(void)
-{
-	struct platform_device *pdev;
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (!usbh2_pdata.otg)
-		return -ENODEV;
-
-	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-static struct gpio_led mx31moboard_leds[] = {
-	{
-		.name 	= "coreboard-led-0:red:running",
-		.default_trigger = "heartbeat",
-		.gpio 	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
-	}, {
-		.name	= "coreboard-led-1:red",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
-	}, {
-		.name	= "coreboard-led-2:red",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
-	}, {
-		.name	= "coreboard-led-3:red",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
-	},
-};
-
-static struct gpio_led_platform_data mx31moboard_led_pdata = {
-	.num_leds 	= ARRAY_SIZE(mx31moboard_leds),
-	.leds		= mx31moboard_leds,
-};
-
-static struct platform_device mx31moboard_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &mx31moboard_led_pdata,
-	},
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mx31moboard_flash,
-	&mx31moboard_leds_device,
-};
-
-static struct mx3_camera_pdata camera_pdata __initdata = {
-	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 4800,
-};
-
-static phys_addr_t mx3_camera_base __initdata;
-#define MX3_CAMERA_BUF_SIZE SZ_4M
-
-static int __init mx31moboard_init_cam(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev;
-
-	imx31_add_ipu_core(&mx3_ipu_data);
-
-	pdev = imx31_alloc_mx3_camera(&camera_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX3_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-
-}
-
-static int mx31moboard_baseboard;
-core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
-
-/*
- * Board specific initialization.
- */
-static void __init mx31moboard_init(void)
-{
-	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
-		"moboard");
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx31_add_imx_uart0(&uart0_pdata);
-	imx31_add_imx_uart4(&uart4_pdata);
-
-	imx31_add_imx_i2c0(&moboard_i2c0_data);
-	imx31_add_imx_i2c1(&moboard_i2c1_data);
-
-	imx31_add_spi_imx1(&moboard_spi1_pdata);
-	imx31_add_spi_imx2(&moboard_spi2_pdata);
-
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-	spi_register_board_info(moboard_spi_board_info,
-		ARRAY_SIZE(moboard_spi_board_info));
-
-	imx31_add_mxc_mmc(0, &sdhc1_pdata);
-
-	mx31moboard_init_cam();
-
-	usb_xcvr_reset();
-
-	moboard_usbh2_init();
-
-	switch (mx31moboard_baseboard) {
-	case MX31NOBOARD:
-		break;
-	case MX31DEVBOARD:
-		mx31moboard_devboard_init();
-		break;
-	case MX31MARXBOT:
-		mx31moboard_marxbot_init();
-		break;
-	case MX31SMARTBOT:
-	case MX31EYEBOT:
-		mx31moboard_smartbot_init(mx31moboard_baseboard);
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
-			mx31moboard_baseboard);
-	}
-}
-
-static void __init mx31moboard_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-struct sys_timer mx31moboard_timer = {
-	.init	= mx31moboard_timer_init,
-};
-
-static void __init mx31moboard_reserve(void)
-{
-	/* reserve 4 MiB for mx3-camera */
-	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
-			MX3_CAMERA_BUF_SIZE);
-	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
-	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
-}
-
-MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
-	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.reserve = mx31moboard_reserve,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.timer = &mx31moboard_timer,
-	.init_machine = mx31moboard_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
deleted file mode 100644
index 882880ac1bbc..000000000000
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * This machine is known as:
- *  - i.MX35 3-Stack Development System
- *  - i.MX35 Platform Development Kit (i.MX35 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
-#include <mach/3ds_debugboard.h>
-
-#include "devices-imx35.h"
-
-#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct physmap_flash_data mx35pdk_flash_data = {
-	.width  = 2,
-};
-
-static struct resource mx35pdk_flash_resource = {
-	.start	= MX35_CS0_BASE_ADDR,
-	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device mx35pdk_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &mx35pdk_flash_data,
-	},
-	.resource = &mx35pdk_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-	.flash_bbt = 1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mx35pdk_flash,
-};
-
-static iomux_v3_cfg_t mx35pdk_pads[] = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* USBOTG */
-	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
-	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-	/* USBH1 */
-	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
-	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
-	/* SDCARD */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-};
-
-static int mx35_3ds_otg_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-/* OTG config */
-static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
-/*
- * ENGCM09152 also requires a hardware change.
- * Please check the MX35 Chip Errata document for details.
- */
-};
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= mx35_3ds_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int mx35_3ds_usbh_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.init		= mx35_3ds_usbh_init,
-	.portsc		= MXC_EHCI_MODE_SERIAL,
-};
-
-static int otg_mode_host;
-
-static int __init mx35_3ds_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", mx35_3ds_otg_mode);
-
-static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx35_3ds_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
-
-	imx35_add_fec(NULL);
-	imx35_add_imx2_wdt(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx35_add_imx_uart0(&uart_pdata);
-
-	if (otg_mode_host)
-		imx35_add_mxc_ehci_otg(&otg_pdata);
-
-	imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
-	if (!otg_mode_host)
-		imx35_add_fsl_usb2_udc(&usb_otg_pdata);
-
-	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
-
-	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
-		pr_warn("Init of the debugboard failed, all "
-				"devices on the debugboard are unusable.\n");
-	imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
-}
-
-static void __init mx35pdk_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer mx35pdk_timer = {
-	.init	= mx35pdk_timer_init,
-};
-
-MACHINE_START(MX35_3DS, "Freescale MX35PDK")
-	/* Maintainer: Freescale Semiconductor, Inc */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.timer = &mx35pdk_timer,
-	.init_machine = mx35_3ds_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
deleted file mode 100644
index 89c213b81295..000000000000
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ /dev/null
@@ -1,696 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-#include <linux/can/platform/sja1000.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/gfp.h>
-#include <linux/memblock.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-#include "pcm037.h"
-
-static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
-
-static int __init pcm037_variant_setup(char *str)
-{
-	if (!strcmp("eet", str))
-		pcm037_instance = PCM037_EET;
-	else if (strcmp("pcm970", str))
-		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
-
-	return 1;
-}
-
-/* Supported values: "pcm970" (default) and "eet" */
-__setup("pcm037_variant=", pcm037_variant_setup);
-
-enum pcm037_board_variant pcm037_variant(void)
-{
-	return pcm037_instance;
-}
-
-/* UART1 with RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_handshake_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-};
-
-/* UART1 without RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_pins[] = {
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-};
-
-static unsigned int pcm037_pins[] = {
-	/* I2C */
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-	MX31_PIN_CSPI2_SS2__I2C3_SDA,
-	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
-	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
-	/* SPI1 */
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART2 */
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	/* UART3 */
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3,
-	MX31_PIN_CSPI3_SCLK__RTS3,
-	MX31_PIN_CSPI3_SPI_RDY__CTS3,
-	/* LAN9217 irq pin */
-	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
-	/* Onewire */
-	MX31_PIN_BATT_LINE__OWIRE,
-	/* Framebuffer */
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_DRDY0__DRDY0,
-	MX31_PIN_D3_REV__D3_REV,
-	MX31_PIN_CONTRAST__CONTRAST,
-	MX31_PIN_D3_SPL__D3_SPL,
-	MX31_PIN_D3_CLS__D3_CLS,
-	MX31_PIN_LCS0__GPI03_23,
-	/* CSI */
-	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
-	MX31_PIN_CSI_D6__CSI_D6,
-	MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8,
-	MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10,
-	MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12,
-	MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14,
-	MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
-	MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
-	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	/* GPIO */
-	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-	/* OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-	MX31_PIN_USBOTG_STP__USBOTG_STP,
-	/* USB host 2 */
-	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm037_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &pcm037_flash_data,
-	},
-	.resource = &pcm037_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= MX31_CS1_BASE_ADDR + 0x300,
-		.end		= MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
-		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
-			  SMSC911X_SAVE_MAC_ADDRESS,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device pcm037_eth = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-static struct platdata_mtd_ram pcm038_sram_data = {
-	.bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
-	.start = MX31_CS4_BASE_ADDR,
-	.end   = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_sram_device = {
-	.name = "mtd-ram",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_sram_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_sram_resource,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
-	.bitrate = 20000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static int pcm037_camera_power(struct device *dev, int on)
-{
-	/* disable or enable the camera in X7 or X8 PCM970 connector */
-	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
-	return 0;
-}
-
-static struct i2c_board_info pcm037_i2c_camera[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	}, {
-		I2C_BOARD_INFO("mt9v022", 0x48),
-	},
-};
-
-static struct soc_camera_link iclink_mt9v022 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.board_info	= &pcm037_i2c_camera[1],
-	.i2c_adapter_id	= 2,
-};
-
-static struct soc_camera_link iclink_mt9t031 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_camera[0],
-	.i2c_adapter_id	= 2,
-};
-
-static struct i2c_board_info pcm037_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}
-};
-
-static struct platform_device pcm037_mt9t031 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_mt9t031,
-	},
-};
-
-static struct platform_device pcm037_mt9v022 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &iclink_mt9v022,
-	},
-};
-
-/* Not connected by default */
-#ifdef PCM970_SDHC_RW_SWITCH
-static int pcm970_sdhc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
-}
-#endif
-
-#define SDHC1_GPIO_WP	IOMUX_TO_GPIO(MX31_PIN_SFS6)
-#define SDHC1_GPIO_DET	IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC1_GPIO_DET);
-
-#ifdef PCM970_SDHC_RW_SWITCH
-	ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC1_GPIO_WP);
-#endif
-
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
-			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-				"sdhc-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-#ifdef PCM970_SDHC_RW_SWITCH
-	gpio_free(SDHC1_GPIO_WP);
-err_gpio_free:
-#endif
-	gpio_free(SDHC1_GPIO_DET);
-
-	return ret;
-}
-
-static void pcm970_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
-	gpio_free(SDHC1_GPIO_DET);
-	gpio_free(SDHC1_GPIO_WP);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-#ifdef PCM970_SDHC_RW_SWITCH
-	.get_ro = pcm970_sdhc1_get_ro,
-#endif
-	.init = pcm970_sdhc1_init,
-	.exit = pcm970_sdhc1_exit,
-};
-
-struct mx3_camera_pdata camera_pdata __initdata = {
-	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 2000,
-};
-
-static phys_addr_t mx3_camera_base __initdata;
-#define MX3_CAMERA_BUF_SIZE SZ_4M
-
-static int __init pcm037_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX3_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
-static struct platform_device *devices[] __initdata = {
-	&pcm037_flash,
-	&pcm037_sram_device,
-	&pcm037_mt9t031,
-	&pcm037_mt9v022,
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 240x320 @ 60 Hz Sharp */
-		.name		= "Sharp-LQ035Q7DH06-QVGA",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
-				  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "TX090",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 38255,
-		.left_margin	= 144,
-		.right_margin	= 0,
-		.upper_margin	= 7,
-		.lower_margin	= 40,
-		.hsync_len	= 96,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "CMEL-OLED",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.name		= "Sharp-LQ035Q7DH06-QVGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct resource pcm970_sja1000_resources[] = {
-	{
-		.start   = MX31_CS5_BASE_ADDR,
-		.end     = MX31_CS5_BASE_ADDR + 0x100 - 1,
-		.flags   = IORESOURCE_MEM,
-	}, {
-		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
-		.end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
-		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.osc_freq	= 16000000,
-	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
-	.cdr		= CDR_CBP,
-};
-
-static struct platform_device pcm970_sja1000 = {
-	.name = "sja1000_platform",
-	.dev = {
-		.platform_data = &pcm970_sja1000_platform_data,
-	},
-	.resource = pcm970_sja1000_resources,
-	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-static int pcm037_otg_init(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= pcm037_otg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int pcm037_usbh2_init(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= pcm037_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init pcm037_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", pcm037_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init pcm037_init(void)
-{
-	int ret;
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
-
-	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
-			"pcm037");
-
-#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
-		| PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG);	/* USBH2_DATA2 */
-	mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG);	/* USBH2_DATA3 */
-	mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG);	/* USBH2_DATA4 */
-	mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG);	/* USBH2_DATA5 */
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG);	/* USBH2_DATA6 */
-	mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG);	/* USBH2_DATA7 */
-
-	if (pcm037_variant() == PCM037_EET)
-		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
-			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
-	else
-		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
-			ARRAY_SIZE(pcm037_uart1_handshake_pins),
-			"pcm037_uart1");
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx31_add_imx2_wdt(NULL);
-	imx31_add_imx_uart0(&uart_pdata);
-	/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
-	imx31_add_imx_uart1(&uart_pdata);
-	imx31_add_imx_uart2(&uart_pdata);
-
-	imx31_add_mxc_w1(NULL);
-
-	/* LAN9217 IRQ pin */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else {
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		platform_device_register(&pcm037_eth);
-	}
-
-
-	/* I2C adapters and devices */
-	i2c_register_board_info(1, pcm037_i2c_devices,
-			ARRAY_SIZE(pcm037_i2c_devices));
-
-	imx31_add_imx_i2c1(&pcm037_i2c1_data);
-	imx31_add_imx_i2c2(&pcm037_i2c2_data);
-
-	imx31_add_mxc_nand(&pcm037_nand_board_info);
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
-	imx31_add_ipu_core(&mx3_ipu_data);
-	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
-	if (!ret)
-		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
-	else
-		iclink_mt9t031.power = NULL;
-
-	pcm037_init_camera();
-
-	platform_device_register(&pcm970_sja1000);
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx31_add_mxc_ehci_otg(&otg_pdata);
-	}
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	if (!otg_mode_host)
-		imx31_add_fsl_usb2_udc(&otg_device_pdata);
-
-}
-
-static void __init pcm037_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-struct sys_timer pcm037_timer = {
-	.init	= pcm037_timer_init,
-};
-
-static void __init pcm037_reserve(void)
-{
-	/* reserve 4 MiB for mx3-camera */
-	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
-			MX3_CAMERA_BUF_SIZE);
-	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
-	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
-}
-
-MACHINE_START(PCM037, "Phytec Phycore pcm037")
-	/* Maintainer: Pengutronix */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.reserve = pcm037_reserve,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.timer = &pcm037_timer,
-	.init_machine = pcm037_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
deleted file mode 100644
index 1b7606bef8f4..000000000000
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-
-#include <asm/mach-types.h>
-
-#include "pcm037.h"
-#include "devices-imx31.h"
-
-static unsigned int pcm037_eet_pins[] = {
-	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
-	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
-	/* GPIO keys */
-	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
-	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
-	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
-	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
-	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
-	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
-	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
-	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
-	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
-	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
-	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
-	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
-	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
-	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
-
-	/* LEDs */
-	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
-	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
-	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
-	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
-};
-
-/* SPI */
-static struct spi_board_info pcm037_spi_dev[] = {
-	{
-		.modalias	= "dac124s085",
-		.max_speed_hz	= 400000,
-		.bus_num	= 0,
-		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
-		.mode		= SPI_CPHA,
-	},
-};
-
-/* Platform Data for MXC CSPI */
-static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
-
-static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
-	.chipselect = pcm037_spi1_cs,
-	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
-};
-
-/* GPIO-keys input device */
-static struct gpio_keys_button pcm037_gpio_keys[] = {
-	{
-		.type	= EV_KEY,
-		.code	= KEY_L,
-		.gpio	= 0,
-		.desc	= "Wheel Manual",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_A,
-		.gpio	= 1,
-		.desc	= "Wheel AF",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_V,
-		.gpio	= 2,
-		.desc	= "Wheel View",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_M,
-		.gpio	= 3,
-		.desc	= "Wheel Menu",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_UP,
-		.gpio	= 32,
-		.desc	= "Nav Pad Up",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_RIGHT,
-		.gpio	= 33,
-		.desc	= "Nav Pad Right",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_DOWN,
-		.gpio	= 34,
-		.desc	= "Nav Pad Down",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_LEFT,
-		.gpio	= 35,
-		.desc	= "Nav Pad Left",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_ENTER,
-		.gpio	= 38,
-		.desc	= "Nav Pad Ok",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_O,
-		.gpio	= 39,
-		.desc	= "Wheel Off",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= BTN_FORWARD,
-		.gpio	= 50,
-		.desc	= "Focus Forward",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= BTN_BACK,
-		.gpio	= 51,
-		.desc	= "Focus Backward",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= BTN_MIDDLE,
-		.gpio	= 52,
-		.desc	= "Release Half",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= BTN_EXTRA,
-		.gpio	= 53,
-		.desc	= "Release Full",
-		.wakeup	= 0,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		pcm037_gpio_keys_platform_data __initconst = {
-	.buttons	= pcm037_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
-	.rep		= 0, /* No auto-repeat */
-};
-
-static int __init eet_init_devices(void)
-{
-	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
-		return 0;
-
-	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
-				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
-
-	/* SPI */
-	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
-	imx31_add_spi_imx0(&pcm037_spi1_pdata);
-
-	imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
-
-	return 0;
-}
-late_initcall(eet_init_devices);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
deleted file mode 100644
index 10154cb15567..000000000000
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- *  Copyright (C) 2009 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smc911x.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/ulpi.h>
-#include <mach/audmux.h>
-
-#include "devices-imx35.h"
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 240x320 @ 60 Hz */
-		.name		= "Sharp-LQ035Q7",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "TX090",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 38255,
-		.left_margin	= 144,
-		.right_margin	= 0,
-		.upper_margin	= 7,
-		.lower_margin	= 40,
-		.hsync_len	= 96,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "Sharp-LQ035Q7",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data pcm043_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm043_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device pcm043_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &pcm043_flash_data,
-	},
-	.resource = &pcm043_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
-	.bitrate = 50000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm043_i2c_devices[] = {
-       {
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}
-};
-
-static struct platform_device *devices[] __initdata = {
-	&pcm043_flash,
-};
-
-static iomux_v3_cfg_t pcm043_pads[] = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* UART2 */
-	MX35_PAD_CTS2__UART2_CTS,
-	MX35_PAD_RTS2__UART2_RTS,
-	MX35_PAD_TXD2__UART2_TXD_MUX,
-	MX35_PAD_RXD2__UART2_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
-	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
-	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	/* gpio */
-	MX35_PAD_ATA_CS0__GPIO2_6,
-	/* USB host */
-	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
-	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
-	/* SSI */
-	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
-	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
-	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
-	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
-	/* CAN2 */
-	MX35_PAD_TX5_RX0__CAN2_TXCAN,
-	MX35_PAD_TX4_RX1__CAN2_RXCAN,
-	/* esdhc */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
-	MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
-};
-
-#define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
-#define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
-#define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
-#define SD1_GPIO_WP	IMX_GPIO_NR(2, 23)
-#define SD1_GPIO_CD	IMX_GPIO_NR(2, 24)
-
-static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
-{
-	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	int ret;
-
-	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
-	if (ret) {
-		printk("failed to get GPIO_TXFS: %d\n", ret);
-		return;
-	}
-
-	mxc_iomux_v3_setup_pad(txfs_gpio);
-
-	/* warm reset */
-	gpio_direction_output(AC97_GPIO_TXFS, 1);
-	udelay(2);
-	gpio_set_value(AC97_GPIO_TXFS, 0);
-
-	gpio_free(AC97_GPIO_TXFS);
-	mxc_iomux_v3_setup_pad(txfs);
-}
-
-static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
-{
-	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
-	iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
-	iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
-	int ret;
-
-	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
-	if (ret)
-		goto err1;
-
-	ret = gpio_request(AC97_GPIO_TXD, "SSI");
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(AC97_GPIO_RESET, "SSI");
-	if (ret)
-		goto err3;
-
-	mxc_iomux_v3_setup_pad(txfs_gpio);
-	mxc_iomux_v3_setup_pad(txd_gpio);
-	mxc_iomux_v3_setup_pad(reset_gpio);
-
-	gpio_direction_output(AC97_GPIO_TXFS, 0);
-	gpio_direction_output(AC97_GPIO_TXD, 0);
-
-	/* cold reset */
-	gpio_direction_output(AC97_GPIO_RESET, 0);
-	udelay(10);
-	gpio_direction_output(AC97_GPIO_RESET, 1);
-
-	mxc_iomux_v3_setup_pad(txd);
-	mxc_iomux_v3_setup_pad(txfs);
-
-	gpio_free(AC97_GPIO_RESET);
-err3:
-	gpio_free(AC97_GPIO_TXD);
-err2:
-	gpio_free(AC97_GPIO_TXFS);
-err1:
-	if (ret)
-		printk("%s failed with %d\n", __func__, ret);
-	mdelay(1);
-}
-
-static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
-	.ac97_reset = pcm043_ac97_cold_reset,
-	.ac97_warm_reset = pcm043_ac97_warm_reset,
-	.flags = IMX_SSI_USE_AC97,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static int pcm043_otg_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= pcm043_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int pcm043_usbh1_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
-	.init	= pcm043_usbh1_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-};
-
-static int otg_mode_host;
-
-static int __init pcm043_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", pcm043_otg_mode);
-
-static struct esdhc_platform_data sd1_pdata = {
-	.wp_gpio = SD1_GPIO_WP,
-	.cd_gpio = SD1_GPIO_CD,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init pcm043_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
-
-	mxc_audmux_v2_configure_port(3,
-			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
-			MXC_AUDMUX_V2_PTCR_TFSEL(0) |
-			MXC_AUDMUX_V2_PTCR_TFSDIR,
-			MXC_AUDMUX_V2_PDCR_RXDSEL(0));
-
-	mxc_audmux_v2_configure_port(0,
-			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
-			MXC_AUDMUX_V2_PTCR_TCSEL(3) |
-			MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
-			MXC_AUDMUX_V2_PDCR_RXDSEL(3));
-
-	imx35_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx35_add_imx2_wdt(NULL);
-
-	imx35_add_imx_uart0(&uart_pdata);
-	imx35_add_mxc_nand(&pcm037_nand_board_info);
-	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
-
-	imx35_add_imx_uart1(&uart_pdata);
-
-	i2c_register_board_info(0, pcm043_i2c_devices,
-			ARRAY_SIZE(pcm043_i2c_devices));
-
-	imx35_add_imx_i2c0(&pcm043_i2c0_data);
-
-	imx35_add_ipu_core(&mx3_ipu_data);
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx35_add_mxc_ehci_otg(&otg_pdata);
-	}
-	imx35_add_mxc_ehci_hs(&usbh1_pdata);
-
-	if (!otg_mode_host)
-		imx35_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
-}
-
-static void __init pcm043_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer pcm043_timer = {
-	.init	= pcm043_timer_init,
-};
-
-MACHINE_START(PCM043, "Phytec Phycore pcm043")
-	/* Maintainer: Pengutronix */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.timer = &pcm043_timer,
-	.init_machine = pcm043_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
deleted file mode 100644
index a6052872ffb8..000000000000
--- a/arch/arm/mach-mx3/mach-qong.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- *  Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <mach/iomux-mx3.h>
-
-#include "devices-imx31.h"
-
-/* FPGA defines */
-#define QONG_FPGA_VERSION(major, minor, rev)	\
-	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-
-#define QONG_FPGA_BASEADDR 		MX31_CS1_BASE_ADDR
-#define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
-
-#define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
-#define QONG_FPGA_CTRL_SIZE 		0x10
-/* FPGA control registers */
-#define QONG_FPGA_CTRL_VERSION		0x00
-
-#define QONG_DNET_ID		1
-#define QONG_DNET_BASEADDR	\
-	(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
-#define QONG_DNET_SIZE 		0x00001000
-
-#define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
-};
-
-static inline void __init mxc_init_imx_uart(void)
-{
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
-			"uart-0");
-	imx31_add_imx_uart0(&uart_pdata);
-}
-
-static struct resource dnet_resources[] = {
-	{
-		.name	= "dnet-memory",
-		.start	= QONG_DNET_BASEADDR,
-		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= QONG_FPGA_IRQ,
-		.end	= QONG_FPGA_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dnet_device = {
-	.name			= "dnet",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(dnet_resources),
-	.resource		= dnet_resources,
-};
-
-static int __init qong_init_dnet(void)
-{
-	int ret;
-
-	ret = platform_device_register(&dnet_device);
-	return ret;
-}
-
-/* MTD NOR flash */
-
-static struct physmap_flash_data qong_flash_data = {
-	.width = 2,
-};
-
-static struct resource qong_flash_resource = {
-	.start = MX31_CS0_BASE_ADDR,
-	.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &qong_flash_data,
-		},
-	.resource = &qong_flash_resource,
-	.num_resources = 1,
-};
-
-static void qong_init_nor_mtd(void)
-{
-	(void)platform_device_register(&qong_nor_mtd_device);
-}
-
-/*
- * Hardware specific access to control-lines
- */
-static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
-	else
-		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
-}
-
-/*
- * Read the Device Ready pin.
- */
-static int qong_nand_device_ready(struct mtd_info *mtd)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-}
-
-static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
-{
-	if (chip >= 0)
-		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
-	else
-		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
-}
-
-static struct platform_nand_data qong_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.chip_delay		= 20,
-		.options		= 0,
-	},
-	.ctrl = {
-		.cmd_ctrl 		= qong_nand_cmd_ctrl,
-		.dev_ready		= qong_nand_device_ready,
-		.select_chip		= qong_nand_select_chip,
-	}
-};
-
-static struct resource qong_nand_resource = {
-	.start  	= MX31_CS3_BASE_ADDR,
-	.end    	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nand_device = {
-	.name		= "gen_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &qong_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &qong_nand_resource,
-};
-
-static void __init qong_init_nand_mtd(void)
-{
-	/* init CS */
-	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
-	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
-
-	/* enable pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
-		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
-
-	/* ready/busy pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-
-	/* write protect pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
-
-	platform_device_register(&qong_nand_device);
-}
-
-static void __init qong_init_fpga(void)
-{
-	void __iomem *regs;
-	u32 fpga_ver;
-
-	regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
-	if (!regs) {
-		printk(KERN_ERR "%s: failed to map registers, aborting.\n",
-				__func__);
-		return;
-	}
-
-	fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
-	iounmap(regs);
-	printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
-			(fpga_ver & 0xF000) >> 12,
-			(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
-	if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
-		printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
-				"devices won't be registered!\n");
-		return;
-	}
-
-	/* register FPGA-based devices */
-	qong_init_nand_mtd();
-	qong_init_dnet();
-}
-
-/*
- * Board specific initialization.
- */
-static void __init qong_init(void)
-{
-	mxc_init_imx_uart();
-	qong_init_nor_mtd();
-	qong_init_fpga();
-}
-
-static void __init qong_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer qong_timer = {
-	.init	= qong_timer_init,
-};
-
-MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
-	/* Maintainer: DENX Software Engineering GmbH */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.timer = &qong_timer,
-	.init_machine = qong_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-mx3/mach-vpr200.c
deleted file mode 100644
index d74e3473d236..000000000000
--- a/arch/arm/mach-mx3/mach-vpr200.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- * Copyright 2010 Creative Product Design
- *
- * Derived from mx35 3stack.
- * Original author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/mfd/mc13xxx.h>
-
-#include "devices-imx35.h"
-
-#define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
-#define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)
-
-#define GPIO_BUTTON1	IMX_GPIO_NR(1, 4)
-#define GPIO_BUTTON2	IMX_GPIO_NR(1, 5)
-#define GPIO_BUTTON3	IMX_GPIO_NR(1, 7)
-#define GPIO_BUTTON4	IMX_GPIO_NR(1, 8)
-#define GPIO_BUTTON5	IMX_GPIO_NR(1, 9)
-#define GPIO_BUTTON6	IMX_GPIO_NR(1, 10)
-#define GPIO_BUTTON7	IMX_GPIO_NR(1, 11)
-#define GPIO_BUTTON8	IMX_GPIO_NR(1, 12)
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 800x480 @ 60 Hz */
-		.name		= "PT0708048",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= KHZ2PICOS(33260),
-		.left_margin	= 50,
-		.right_margin	= 156,
-		.upper_margin	= 10,
-		.lower_margin	= 10,
-		.hsync_len	= 1,	/* note: DE only display */
-		.vsync_len	= 1,	/* note: DE only display */
-		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 800x480 @ 60 Hz */
-		.name		= "CTP-CLAA070LC0ACW",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= KHZ2PICOS(27000),
-		.left_margin	= 50,
-		.right_margin	= 50,	/* whole line should have 900 clocks */
-		.upper_margin	= 10,
-		.lower_margin	= 10,	/* whole frame should have 500 lines */
-		.hsync_len	= 1,	/* note: DE only display */
-		.vsync_len	= 1,	/* note: DE only display */
-		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "PT0708048",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data vpr200_flash_data = {
-	.width  = 2,
-};
-
-static struct resource vpr200_flash_resource = {
-	.start	= MX35_CS0_BASE_ADDR,
-	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device vpr200_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &vpr200_flash_data,
-	},
-	.resource = &vpr200_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data
-		vpr200_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-	.flash_bbt = 1,
-};
-
-#define VPR_KEY_DEBOUNCE	500
-static struct gpio_keys_button vpr200_gpio_keys_table[] = {
-	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
-	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
-};
-
-static const struct gpio_keys_platform_data
-		vpr200_gpio_keys_data __initconst = {
-	.buttons = vpr200_gpio_keys_table,
-	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
-};
-
-static struct mc13xxx_platform_data vpr200_pmic = {
-	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
-	.bitrate = 50000,
-};
-
-static struct at24_platform_data vpr200_eeprom = {
-	.byte_len = 2048 / 8,
-	.page_size = 1,
-};
-
-static struct i2c_board_info vpr200_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
-		.platform_data = &vpr200_eeprom,
-	}, {
-		I2C_BOARD_INFO("mc13892", 0x08),
-		.platform_data = &vpr200_pmic,
-		.irq = gpio_to_irq(GPIO_PMIC_INT),
-	}
-};
-
-static iomux_v3_cfg_t vpr200_pads[] = {
-	/* UART1 */
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* UART3 */
-	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
-	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	/* LCD Enable */
-	MX35_PAD_D3_VSYNC__GPIO1_2,
-	/* USBOTG */
-	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
-	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-	/* SDCARD */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* PMIC */
-	MX35_PAD_GPIO2_0__GPIO2_0,
-	/* GPIO keys */
-	MX35_PAD_SCKR__GPIO1_4,
-	MX35_PAD_COMPARE__GPIO1_5,
-	MX35_PAD_SCKT__GPIO1_7,
-	MX35_PAD_FST__GPIO1_8,
-	MX35_PAD_HCKT__GPIO1_9,
-	MX35_PAD_TX5_RX0__GPIO1_10,
-	MX35_PAD_TX4_RX1__GPIO1_11,
-	MX35_PAD_TX3_RX2__GPIO1_12,
-};
-
-/* USB Device config */
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI,
-	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static int vpr200_usbh_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id,
-			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.init = vpr200_usbh_init,
-	.portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&vpr200_flash,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init vpr200_board_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
-
-	imx35_add_fec(NULL);
-	imx35_add_imx2_wdt(NULL);
-	imx_add_gpio_keys(&vpr200_gpio_keys_data);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
-		printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
-	else
-		gpio_direction_output(GPIO_LCDPWR, 0);
-
-	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
-		printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
-	else
-		gpio_direction_input(GPIO_PMIC_INT);
-
-	imx35_add_imx_uart0(NULL);
-	imx35_add_imx_uart2(NULL);
-
-	imx35_add_ipu_core(&mx3_ipu_data);
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	imx35_add_fsl_usb2_udc(&otg_device_pdata);
-	imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
-	imx35_add_mxc_nand(&vpr200_nand_board_info);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
-
-	i2c_register_board_info(0, vpr200_i2c_devices,
-			ARRAY_SIZE(vpr200_i2c_devices));
-
-	imx35_add_imx_i2c0(&vpr200_i2c0_data);
-}
-
-static void __init vpr200_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer vpr200_timer = {
-	.init	= vpr200_timer_init,
-};
-
-MACHINE_START(VPR200, "VPR200")
-	/* Maintainer: Creative Product Design */
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.timer = &vpr200_timer,
-	.init_machine = vpr200_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
deleted file mode 100644
index 54d7174b4202..000000000000
--- a/arch/arm/mach-mx3/mm.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/gpio.h>
-#include <mach/irqs.h>
-
-#ifdef CONFIG_SOC_IMX31
-static struct map_desc mx31_io_desc[] __initdata = {
-	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
-	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-static struct mxc_gpio_port imx31_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
-};
-
-void __init mx31_init_irq(void)
-{
-	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
-}
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-}
-
-static struct mxc_gpio_port imx35_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
-};
-
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
-}
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_CACHE_L2X0
-static int mxc_init_l2x0(void)
-{
-	void __iomem *l2x0_base;
-	void __iomem *clkctl_base;
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value
- */
-#define L2_MEM_VAL 0x10
-
-	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
-	if (clkctl_base != NULL) {
-		writel(0x00000515, clkctl_base + L2_MEM_VAL);
-		iounmap(clkctl_base);
-	} else {
-		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
-	}
-
-	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
-	if (IS_ERR(l2x0_base)) {
-		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
-				PTR_ERR(l2x0_base));
-		return 0;
-	}
-
-	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-
-	return 0;
-}
-
-arch_initcall(mxc_init_l2x0);
-#endif
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
deleted file mode 100644
index e70f4527c918..000000000000
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- *  LILLY-1131 development board support
- *
- *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- *  based on code for other MX31 boards,
- *
- *    Copyright 2005-2007 Freescale Semiconductor
- *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-
-#include "devices-imx31.h"
-
-/*
- * This file contains board-specific initialization routines for the
- * LILLY-1131 development board. If you design an own baseboard for the
- * module, use this file as base for support code.
- */
-
-static unsigned int lilly_db_board_pins[] __initdata = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3,
-	MX31_PIN_CSPI3_SCLK__RTS3,
-	MX31_PIN_CSPI3_SPI_RDY__CTS3,
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_DRDY0__DRDY0,
-	MX31_PIN_CONTRAST__CONTRAST,
-};
-
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* MMC support */
-
-static int mxc_mmc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
-}
-
-static int gpio_det, gpio_wp;
-
-#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int mxc_mmc1_init(struct device *dev,
-			 irq_handler_t detect_irq, void *data)
-{
-	int ret;
-
-	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
-	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
-
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
-
-	ret = gpio_request(gpio_det, "MMC detect");
-	if (ret)
-		return ret;
-
-	ret = gpio_request(gpio_wp, "MMC w/p");
-	if (ret)
-		goto exit_free_det;
-
-	gpio_direction_input(gpio_det);
-	gpio_direction_input(gpio_wp);
-
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC detect", data);
-	if (ret)
-		goto exit_free_wp;
-
-	return 0;
-
-exit_free_wp:
-	gpio_free(gpio_wp);
-
-exit_free_det:
-	gpio_free(gpio_det);
-
-	return ret;
-}
-
-static void mxc_mmc1_exit(struct device *dev, void *data)
-{
-	gpio_free(gpio_det);
-	gpio_free(gpio_wp);
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
-}
-
-static const struct imxmmc_platform_data mmc_pdata __initconst = {
-	.get_ro	= mxc_mmc1_get_ro,
-	.init	= mxc_mmc1_init,
-	.exit	= mxc_mmc1_exit,
-};
-
-/* Framebuffer support */
-static const struct ipu_platform_data ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static const struct fb_videomode fb_modedb = {
-	/* 640x480 TFT panel (IPS-056T) */
-	.name	   	= "CRT-VGA",
-	.refresh	= 64,
-	.xres		= 640,
-	.yres		= 480,
-	.pixclock	= 30000,
-	.left_margin	= 200,
-	.right_margin	= 2,
-	.upper_margin	= 2,
-	.lower_margin	= 2,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-	.vmode		= FB_VMODE_NONINTERLACED,
-	.flag		= 0,
-};
-
-static struct mx3fb_platform_data fb_pdata __initdata = {
-	.name		= "CRT-VGA",
-	.mode		= &fb_modedb,
-	.num_modes	= 1,
-};
-
-#define LCD_VCC_EN_GPIO	 (7)
-
-static void __init mx31lilly_init_fb(void)
-{
-	if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
-		printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
-		return;
-	}
-
-	imx31_add_ipu_core(&ipu_data);
-	imx31_add_mx3_sdc_fb(&fb_pdata);
-	gpio_direction_output(LCD_VCC_EN_GPIO, 1);
-}
-
-void __init mx31lilly_db_init(void)
-{
-	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
-					ARRAY_SIZE(lilly_db_board_pins),
-					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_imx_uart1(&uart_pdata);
-	imx31_add_imx_uart2(&uart_pdata);
-	imx31_add_mxc_mmc(0, &mmc_pdata);
-	mx31lilly_init_fb();
-}
-
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
deleted file mode 100644
index 5aa053edc17c..000000000000
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- *  LogicPD i.MX31 SOM-LV development board support
- *
- *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- *  based on code for other MX31 boards,
- *
- *    Copyright 2005-2007 Freescale Semiconductor
- *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lite.h>
-
-#include "devices-imx31.h"
-
-/*
- * This file contains board-specific initialization routines for the
- * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
- * If you design an own baseboard for the module, use this file as base
- * for support code.
- */
-
-static unsigned int litekit_db_board_pins[] __initdata = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	/* SPI 0 */
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-};
-
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* MMC */
-
-static int gpio_det, gpio_wp;
-
-#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-		     PAD_CTL_ODE_CMOS)
-
-static int mxc_mmc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
-}
-
-static int mxc_mmc1_init(struct device *dev,
-			 irq_handler_t detect_irq, void *data)
-{
-	int ret;
-
-	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
-	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
-
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-
-	ret = gpio_request(gpio_det, "MMC detect");
-	if (ret)
-		return ret;
-
-	ret = gpio_request(gpio_wp, "MMC w/p");
-	if (ret)
-		goto exit_free_det;
-
-	gpio_direction_input(gpio_det);
-	gpio_direction_input(gpio_wp);
-
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC detect", data);
-	if (ret)
-		goto exit_free_wp;
-
-	return 0;
-
-exit_free_wp:
-	gpio_free(gpio_wp);
-
-exit_free_det:
-	gpio_free(gpio_det);
-
-	return ret;
-}
-
-static void mxc_mmc1_exit(struct device *dev, void *data)
-{
-	gpio_free(gpio_det);
-	gpio_free(gpio_wp);
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
-}
-
-static const struct imxmmc_platform_data mmc_pdata __initconst = {
-	.get_ro	 = mxc_mmc1_get_ro,
-	.init	   = mxc_mmc1_init,
-	.exit	   = mxc_mmc1_exit,
-};
-
-/* SPI */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(1),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
-};
-
-/* GPIO LEDs */
-
-static struct gpio_led litekit_leds[] = {
-	{
-		.name           = "GPIO0",
-		.gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
-		.active_low     = 1,
-		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name           = "GPIO1",
-		.gpio           = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
-		.active_low     = 1,
-		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
-	}
-};
-
-static struct gpio_led_platform_data litekit_led_platform_data = {
-	.leds           = litekit_leds,
-	.num_leds       = ARRAY_SIZE(litekit_leds),
-};
-
-static struct platform_device litekit_led_device = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &litekit_led_platform_data,
-	},
-};
-
-void __init mx31lite_db_init(void)
-{
-	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
-					ARRAY_SIZE(litekit_db_board_pins),
-					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_mxc_mmc(0, &mmc_pdata);
-	imx31_add_spi_imx0(&spi0_pdata);
-	platform_device_register(&litekit_led_device);
-	imx31_add_imx2_wdt(NULL);
-	imx31_add_mxc_rtc(NULL);
-}
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
deleted file mode 100644
index 0aa25364360d..000000000000
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/hardware.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-static unsigned int devboard_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
-	/* SDHC2 */
-	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
-	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
-	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
-	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* USB H1 */
-	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
-	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
-	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
-	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
-	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
-	/* SEL */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
-#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
-
-static int devboard_sdhc2_get_ro(struct device *dev)
-{
-	return !gpio_get_value(SDHC2_WP);
-}
-
-static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC2_CD, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC2_CD);
-
-	ret = gpio_request(SDHC2_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC2_WP);
-
-	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"sdhc2-card-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(SDHC2_WP);
-err_gpio_free:
-	gpio_free(SDHC2_CD);
-
-	return ret;
-}
-
-static void devboard_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(SDHC2_CD), data);
-	gpio_free(SDHC2_WP);
-	gpio_free(SDHC2_CD);
-}
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
-	.get_ro	= devboard_sdhc2_get_ro,
-	.init	= devboard_sdhc2_init,
-	.exit	= devboard_sdhc2_exit,
-};
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void devboard_init_sel_gpios(void)
-{
-	if (!gpio_request(SEL0, "sel0")) {
-		gpio_direction_input(SEL0);
-		gpio_export(SEL0, true);
-	}
-
-	if (!gpio_request(SEL1, "sel1")) {
-		gpio_direction_input(SEL1);
-		gpio_export(SEL1, true);
-	}
-
-	if (!gpio_request(SEL2, "sel2")) {
-		gpio_direction_input(SEL2);
-		gpio_export(SEL2, true);
-	}
-
-	if (!gpio_request(SEL3, "sel3")) {
-		gpio_direction_input(SEL3);
-		gpio_export(SEL3, true);
-	}
-}
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int devboard_usbh1_hw_init(struct platform_device *pdev)
-{
-	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
-#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
-
-static int devboard_isp1105_init(struct otg_transceiver *otg)
-{
-	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
-	if (ret)
-		return ret;
-	/* single ended */
-	gpio_direction_output(USBH1_MODE, 0);
-
-	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
-	if (ret) {
-		gpio_free(USBH1_MODE);
-		return ret;
-	}
-	gpio_direction_output(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-
-static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
-{
-	if (on)
-		gpio_set_value(USBH1_VBUSEN_B, 0);
-	else
-		gpio_set_value(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
-	.init	= devboard_usbh1_hw_init,
-	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static int __init devboard_usbh1_init(void)
-{
-	struct otg_transceiver *otg;
-	struct platform_device *pdev;
-
-	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
-	if (!otg)
-		return -ENOMEM;
-
-	otg->label	= "ISP1105";
-	otg->init	= devboard_isp1105_init;
-	otg->set_vbus	= devboard_isp1105_set_vbus;
-
-	usbh1_pdata.otg = otg;
-
-	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_devboard_init(void)
-{
-	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-
-	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
-		"devboard");
-
-	imx31_add_imx_uart1(&uart_pdata);
-
-	imx31_add_mxc_mmc(1, &sdhc2_pdata);
-
-	devboard_init_sel_gpios();
-
-	imx31_add_fsl_usb2_udc(&usb_pdata);
-
-	devboard_usbh1_init();
-}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
deleted file mode 100644
index bb639cbda4e5..000000000000
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
-#include <media/soc_camera.h>
-
-#include "devices-imx31.h"
-
-static unsigned int marxbot_pins[] = {
-	/* SDHC2 */
-	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
-	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
-	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
-	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* CSI */
-	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
-	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
-	MX31_PIN_TXD2__GPIO1_28,
-	/* dsPIC resets */
-	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
-	/*battery detection */
-	MX31_PIN_LCS0__GPIO3_23,
-	/* USB H1 */
-	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
-	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
-	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
-	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
-	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
-	/* SEL */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
-#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
-
-static int marxbot_sdhc2_get_ro(struct device *dev)
-{
-	return !gpio_get_value(SDHC2_WP);
-}
-
-static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC2_CD, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC2_CD);
-
-	ret = gpio_request(SDHC2_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC2_WP);
-
-	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"sdhc2-card-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(SDHC2_WP);
-err_gpio_free:
-	gpio_free(SDHC2_CD);
-
-	return ret;
-}
-
-static void marxbot_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(SDHC2_CD), data);
-	gpio_free(SDHC2_WP);
-	gpio_free(SDHC2_CD);
-}
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
-	.get_ro	= marxbot_sdhc2_get_ro,
-	.init	= marxbot_sdhc2_init,
-	.exit	= marxbot_sdhc2_exit,
-};
-
-#define TRSLAT_RST_B	IOMUX_TO_GPIO(MX31_PIN_STXD5)
-#define DSPICS_RST_B	IOMUX_TO_GPIO(MX31_PIN_SRXD5)
-
-static void dspics_resets_init(void)
-{
-	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
-		gpio_direction_output(TRSLAT_RST_B, 0);
-		gpio_export(TRSLAT_RST_B, false);
-	}
-
-	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
-		gpio_direction_output(DSPICS_RST_B, 0);
-		gpio_export(DSPICS_RST_B, false);
-	}
-}
-
-static struct spi_board_info marxbot_spi_board_info[] __initdata = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 300000,
-		.bus_num = 1,
-		.chip_select = 1, /* according spi1_cs[] ! */
-	},
-};
-
-#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
-#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
-#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
-
-static int marxbot_basecam_power(struct device *dev, int on)
-{
-	gpio_set_value(BASECAM_POWER, !on);
-	return 0;
-}
-
-static int marxbot_basecam_reset(struct device *dev)
-{
-	gpio_set_value(BASECAM_RST_B, 0);
-	udelay(100);
-	gpio_set_value(BASECAM_RST_B, 1);
-	return 0;
-}
-
-static struct i2c_board_info marxbot_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	},
-};
-
-static struct soc_camera_link base_iclink = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= marxbot_basecam_power,
-	.reset		= marxbot_basecam_reset,
-	.board_info	= &marxbot_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device marxbot_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &base_iclink,
-		},
-	},
-};
-
-static struct platform_device *marxbot_cameras[] __initdata = {
-	&marxbot_camera[0],
-};
-
-static int __init marxbot_cam_init(void)
-{
-	int ret = gpio_request(CAM_CHOICE, "cam-choice");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_CHOICE, 0);
-
-	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(BASECAM_RST_B, 1);
-	ret = gpio_request(BASECAM_POWER, "basecam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(BASECAM_POWER, 0);
-
-	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(TURRETCAM_RST_B, 1);
-	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(TURRETCAM_POWER, 0);
-
-	return 0;
-}
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void marxbot_init_sel_gpios(void)
-{
-	if (!gpio_request(SEL0, "sel0")) {
-		gpio_direction_input(SEL0);
-		gpio_export(SEL0, true);
-	}
-
-	if (!gpio_request(SEL1, "sel1")) {
-		gpio_direction_input(SEL1);
-		gpio_export(SEL1, true);
-	}
-
-	if (!gpio_request(SEL2, "sel2")) {
-		gpio_direction_input(SEL2);
-		gpio_export(SEL2, true);
-	}
-
-	if (!gpio_request(SEL3, "sel3")) {
-		gpio_direction_input(SEL3);
-		gpio_export(SEL3, true);
-	}
-}
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int marxbot_usbh1_hw_init(struct platform_device *pdev)
-{
-	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
-#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
-
-static int marxbot_isp1105_init(struct otg_transceiver *otg)
-{
-	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
-	if (ret)
-		return ret;
-	/* single ended */
-	gpio_direction_output(USBH1_MODE, 0);
-
-	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
-	if (ret) {
-		gpio_free(USBH1_MODE);
-		return ret;
-	}
-	gpio_direction_output(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-
-static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
-{
-	if (on)
-		gpio_set_value(USBH1_VBUSEN_B, 0);
-	else
-		gpio_set_value(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
-	.init	= marxbot_usbh1_hw_init,
-	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static int __init marxbot_usbh1_init(void)
-{
-	struct otg_transceiver *otg;
-	struct platform_device *pdev;
-
-	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
-	if (!otg)
-		return -ENOMEM;
-
-	otg->label	= "ISP1105";
-	otg->init	= marxbot_isp1105_init;
-	otg->set_vbus	= marxbot_isp1105_set_vbus;
-
-	usbh1_pdata.otg = otg;
-
-	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_marxbot_init(void)
-{
-	printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
-
-	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
-		"marxbot");
-
-	marxbot_init_sel_gpios();
-
-	dspics_resets_init();
-
-	imx31_add_mxc_mmc(1, &sdhc2_pdata);
-
-	spi_register_board_info(marxbot_spi_board_info,
-		ARRAY_SIZE(marxbot_spi_board_info));
-
-	marxbot_cam_init();
-	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
-
-	/* battery present pin */
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
-	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
-
-	imx31_add_fsl_usb2_udc(&usb_pdata);
-
-	marxbot_usbh1_init();
-}
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
deleted file mode 100644
index fabb801e7994..000000000000
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/ulpi.h>
-
-#include <media/soc_camera.h>
-
-#include "devices-imx31.h"
-
-static unsigned int smartbot_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
-	/* CSI */
-	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
-	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
-	/* ENABLES */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define CAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define CAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-
-static int smartbot_cam_power(struct device *dev, int on)
-{
-	gpio_set_value(CAM_POWER, !on);
-	return 0;
-}
-
-static int smartbot_cam_reset(struct device *dev)
-{
-	gpio_set_value(CAM_RST_B, 0);
-	udelay(100);
-	gpio_set_value(CAM_RST_B, 1);
-	return 0;
-}
-
-static struct i2c_board_info smartbot_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	},
-};
-
-static struct soc_camera_link base_iclink = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= smartbot_cam_power,
-	.reset		= smartbot_cam_reset,
-	.board_info	= &smartbot_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device smartbot_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &base_iclink,
-		},
-	},
-};
-
-static struct platform_device *smartbot_cameras[] __initdata = {
-	&smartbot_camera[0],
-};
-
-static int __init smartbot_cam_init(void)
-{
-	int ret = gpio_request(CAM_RST_B, "cam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_RST_B, 1);
-	ret = gpio_request(CAM_POWER, "cam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_POWER, 0);
-
-	return 0;
-}
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#if defined(CONFIG_USB_ULPI)
-
-static int smartbot_otg_init(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
-	.init	= smartbot_otg_init,
-	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static int __init smartbot_otg_host_init(void)
-{
-	struct platform_device *pdev;
-
-	otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-		ULPI_OTG_DRVVBUS_EXT);
-	if (!otg_host_pdata.otg)
-		return -ENODEV;
-
-	pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-#else
-static inline int smartbot_otg_host_init(void) { return 0; }
-#endif
-
-#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void smartbot_resets_init(void)
-{
-	if (!gpio_request(POWER_EN, "power-enable")) {
-		gpio_direction_output(POWER_EN, 0);
-		gpio_export(POWER_EN, false);
-	}
-
-	if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
-		gpio_direction_output(DSPIC_RST_B, 0);
-		gpio_export(DSPIC_RST_B, false);
-	}
-
-	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
-		gpio_direction_output(TRSLAT_RST_B, 0);
-		gpio_export(TRSLAT_RST_B, false);
-	}
-
-	if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
-		gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
-		gpio_export(TRSLAT_SRC_CHOICE, false);
-	}
-}
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_smartbot_init(int board)
-{
-	printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
-
-	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
-		"smartbot");
-
-	imx31_add_imx_uart1(&uart_pdata);
-
-	switch (board) {
-	case MX31SMARTBOT:
-		imx31_add_fsl_usb2_udc(&usb_pdata);
-		break;
-	case MX31EYEBOT:
-		smartbot_otg_host_init();
-		break;
-	default:
-		printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
-			board);
-	}
-
-	smartbot_resets_init();
-
-	smartbot_cam_init();
-	platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
-}
diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h
deleted file mode 100644
index d6929721a5fd..000000000000
--- a/arch/arm/mach-mx3/pcm037.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __PCM037_H__
-#define __PCM037_H__
-
-enum pcm037_board_variant {
-	PCM037_PCM970,
-	PCM037_EET,
-};
-
-extern enum pcm037_board_variant pcm037_variant(void);
-
-#endif
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b0cb4258e382..8d183c5a239e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -47,7 +47,6 @@ config ARCH_MX5
 endchoice
 
 source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
 source "arch/arm/mach-mx5/Kconfig"
 
-- 
cgit v1.2.3


From 68dba2aacb11e186a61a848b4fca8d98c97aa59d Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Tue, 11 Jan 2011 09:33:42 +0100
Subject: ARM: mxs/i.MX23: make i2c defines consistent and match the reference
 manual
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The defines for the i2c related irqs (MX23_INT_I2C_DMA and
MX23_INT_I2C_ERROR) already match the reference manual. So make the base
address consistent.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
LAKML-Reference: 1298049507-6987-2-git-send-email-w.sang@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxs/include/mach/mx23.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h
index c0a18c23084a..599094bc99de 100644
--- a/arch/arm/mach-mxs/include/mach/mx23.h
+++ b/arch/arm/mach-mxs/include/mach/mx23.h
@@ -57,7 +57,7 @@
 #define MX23_AUDIOIN_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x04c000)
 #define MX23_LRADC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x050000)
 #define MX23_SPDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x054000)
-#define MX23_I2C0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x058000)
+#define MX23_I2C_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x058000)
 #define MX23_RTC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x05c000)
 #define MX23_PWM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x064000)
 #define MX23_TIMROT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x068000)
-- 
cgit v1.2.3


From a48bfe80c812a8dbc98a10766bd8fe13fc10e51c Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Tue, 11 Jan 2011 10:22:14 +0100
Subject: ARM: mxs: fix naming of struct holding info for mxs-i2c devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

For consistency mxs has to be repeated, one for the name space and
another one for the device name.

LAKML-Reference: 1300308028-8922-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxs/devices-mx28.h                | 2 +-
 arch/arm/mach-mxs/devices/platform-mxs-i2c.c    | 5 +++--
 arch/arm/mach-mxs/include/mach/devices-common.h | 5 +++--
 3 files changed, 7 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index c473eddce8cf..79b94523954a 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -34,7 +34,7 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
 #define mx28_add_flexcan0(pdata)	mx28_add_flexcan(0, pdata)
 #define mx28_add_flexcan1(pdata)	mx28_add_flexcan(1, pdata)
 
-extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
+extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
 #define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
 
 extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
index eab3a06836d6..79222ec8ede1 100644
--- a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
+++ b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
@@ -22,13 +22,14 @@
 	[_id] = mxs_i2c_data_entry_single(soc, _id)
 
 #ifdef CONFIG_SOC_IMX28
-const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
+const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
 	mxs_i2c_data_entry(MX28, 0),
 	mxs_i2c_data_entry(MX28, 1),
 };
 #endif
 
-struct platform_device *__init mxs_add_mxs_i2c(const struct mxs_i2c_data *data)
+struct platform_device *__init mxs_add_mxs_i2c(
+		const struct mxs_mxs_i2c_data *data)
 {
 	struct resource res[] = {
 		{
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index c5137f14c364..7a37469ed5bf 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -65,13 +65,14 @@ struct platform_device *__init mxs_add_flexcan(
 		const struct flexcan_platform_data *pdata);
 
 /* i2c */
-struct mxs_i2c_data {
+struct mxs_mxs_i2c_data {
 	int id;
 	resource_size_t iobase;
 	resource_size_t errirq;
 	resource_size_t dmairq;
 };
-struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
+struct platform_device * __init mxs_add_mxs_i2c(
+		const struct mxs_mxs_i2c_data *data);
 
 /* mmc */
 #include <mach/mmc.h>
-- 
cgit v1.2.3


From c65773ac63861bc735eee3e8cf88997cc7200f2f Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Mon, 6 Dec 2010 10:03:18 +0100
Subject: ARM: imx51: use platform id 2 for imx51-cspi
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The platform id is used to determine the spi bus number, so it should
better be different to the ids used for imx51-ecspi.  Otherwise it's not
possible to use both devices "imx51-cspi.0" and "imx51-ecspi.0".

Alternative approaches are to use dynamic bus numbering as offered by
the spi framework or let the machine code set the bus number.  The
downside of both possibilities is that the bus number isn't fixed for
the same busses on different machines using i.MX51.

LAKML-Reference: 1302100716-21034-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/devices/platform-spi_imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index f4a60ab6763b..f97eb3615b2c 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -80,7 +80,7 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
 
 #ifdef CONFIG_SOC_IMX51
 const struct imx_spi_imx_data imx51_cspi_data __initconst =
-	imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K);
+	imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 2, , SZ_4K);
 
 const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
 #define imx51_ecspi_data_entry(_id, _hwid)				\
-- 
cgit v1.2.3


From 902fb6c9b00b66b5427f43e587fe3187cddd199d Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Wed, 6 Apr 2011 13:05:26 -0300
Subject: ARM: mx51: Remove imx51_add_gpio_keys
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

There is no need for using a MX51-specific version of imx_add_gpio_keys.

Remove imx51_add_gpio_keys and use imx_add_gpio_keys instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
LAKML-Reference: 1302105926-20574-1-git-send-email-fabio.estevam@freescale.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/board-mx51_babbage.c | 2 +-
 arch/arm/mach-mx5/board-mx51_efikamx.c | 2 +-
 arch/arm/mach-mx5/board-mx51_efikasb.c | 2 +-
 arch/arm/mach-mx5/devices-imx51.h      | 2 --
 4 files changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index cba59f16b205..c7b3fabf50f9 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -355,7 +355,7 @@ static void __init mx51_babbage_init(void)
 
 	/* Set the PAD settings for the pwr key. */
 	mxc_iomux_v3_setup_pad(power_key);
-	imx51_add_gpio_keys(&imx_button_data);
+	imx_add_gpio_keys(&imx_button_data);
 
 	imx51_add_imx_i2c(0, &babbage_i2c_data);
 	imx51_add_imx_i2c(1, &babbage_i2c_data);
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index c7c94596887e..6e362315291b 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -249,7 +249,7 @@ static void __init mx51_efikamx_init(void)
 	}
 
 	platform_device_register(&mx51_efikamx_leds_device);
-	imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
+	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
 
 	if (system_rev == 0x11) {
 		gpio_request(EFIKAMX_RESET1_1, "reset");
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 57b4d6bc6bf8..474fc6e4c6df 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -257,7 +257,7 @@ static void __init efikasb_board_init(void)
 	imx51_add_sdhci_esdhc_imx(1, NULL);
 
 	platform_device_register(&mx51_efikasb_leds_device);
-	imx51_add_gpio_keys(&mx51_efikasb_keys_data);
+	imx_add_gpio_keys(&mx51_efikasb_keys_data);
 
 }
 
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index e3253c506d50..e11bc0e0ec49 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -13,8 +13,6 @@ extern const struct imx_fec_data imx51_fec_data;
 #define imx51_add_fec(pdata)	\
 	imx_add_fec(&imx51_fec_data, pdata)
 
-#define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata)
-
 extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
 #define imx51_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-- 
cgit v1.2.3


From 95f540aff2a5fa62b230bb7313bd12c1aa1b4056 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 3 Mar 2011 15:12:44 +0100
Subject: video i.MX: remove mx1 compile time dependencies
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

remove usage of CONFIG_ARCH_MX1. It's mostly unused anyway, replace
it with cpu_is_mx1() where necessary. Also, depend on
IMX_HAVE_PLATFORM_IMX_FB instead of the architectures directly.

LAKML-Reference: 20110303141244.GQ29521@pengutronix.de
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/devices/Kconfig |  1 -
 drivers/video/Kconfig             |  5 +----
 drivers/video/imxfb.c             | 28 ++++++----------------------
 3 files changed, 7 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index a860b16d7258..bd294add932c 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -24,7 +24,6 @@ config IMX_HAVE_PLATFORM_IMXDI_RTC
 
 config IMX_HAVE_PLATFORM_IMX_FB
 	bool
-	select HAVE_FB_IMX
 
 config IMX_HAVE_PLATFORM_IMX_I2C
 	bool
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e6a8d8c0101d..62f337ab52bc 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -8,9 +8,6 @@ menu "Graphics support"
 config HAVE_FB_ATMEL
 	bool
 
-config HAVE_FB_IMX
-	bool
-
 config SH_MIPI_DSI
 	tristate
 	depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
@@ -359,7 +356,7 @@ config FB_SA1100
 
 config FB_IMX
 	tristate "Freescale i.MX LCD support"
-	depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
+	depends on FB && IMX_HAVE_PLATFORM_IMX_FB
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index ef72cb483834..d2ccfd6e662c 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -65,12 +65,6 @@
 #define CPOS_OP		(1<<28)
 #define CPOS_CXP(x)	(((x) & 3ff) << 16)
 
-#ifdef CONFIG_ARCH_MX1
-#define CPOS_CYP(y)	((y) & 0x1ff)
-#else
-#define CPOS_CYP(y)	((y) & 0x3ff)
-#endif
-
 #define LCDC_LCWHB	0x10
 #define LCWHB_BK_EN	(1<<31)
 #define LCWHB_CW(w)	(((w) & 0x1f) << 24)
@@ -79,16 +73,6 @@
 
 #define LCDC_LCHCC	0x14
 
-#ifdef CONFIG_ARCH_MX1
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-#else
-#define LCHCC_CUR_COL_R(r) (((r) & 0x3f) << 12)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 6)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x3f)
-#endif
-
 #define LCDC_PCR	0x18
 
 #define LCDC_HCR	0x1C
@@ -115,11 +99,7 @@
 
 #define LCDC_RMCR	0x34
 
-#ifdef CONFIG_ARCH_MX1
-#define RMCR_LCDC_EN	(1<<1)
-#else
-#define RMCR_LCDC_EN	0
-#endif
+#define RMCR_LCDC_EN_MX1	(1<<1)
 
 #define RMCR_SELF_REF	(1<<0)
 
@@ -536,7 +516,11 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 	writel(readl(fbi->regs + LCDC_CPOS) & ~(CPOS_CC0 | CPOS_CC1),
 		fbi->regs + LCDC_CPOS);
 
-	writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR);
+	/*
+	 * RMCR_LCDC_EN_MX1 is present on i.MX1 only, but doesn't hurt
+	 * on other SoCs
+	 */
+	writel(RMCR_LCDC_EN_MX1, fbi->regs + LCDC_RMCR);
 
 	clk_enable(fbi->clk);
 
-- 
cgit v1.2.3


From 0e4a98e5cb9d9038720cab7c2fb5434752dfd9f2 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Thu, 7 Apr 2011 11:13:25 +0200
Subject: ARM: remove support for mxc91231
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Since support for mxc91231 was introduced 2009 it only saw patches that
were part of (mxc or arm) global cleanups. The only supported machine
only had 4 devices (2x UART, sdhc, watchdog).

Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
LAKML-Reference: 1302211482-17926-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                               |   1 -
 arch/arm/mach-mxc91231/Kconfig                  |  11 -
 arch/arm/mach-mxc91231/Makefile                 |   2 -
 arch/arm/mach-mxc91231/Makefile.boot            |   3 -
 arch/arm/mach-mxc91231/clock.c                  | 640 ------------------------
 arch/arm/mach-mxc91231/crm_regs.h               | 394 ---------------
 arch/arm/mach-mxc91231/devices.c                | 251 ----------
 arch/arm/mach-mxc91231/devices.h                |  13 -
 arch/arm/mach-mxc91231/iomux.c                  | 177 -------
 arch/arm/mach-mxc91231/magx-zn5.c               |  62 ---
 arch/arm/mach-mxc91231/mm.c                     |  62 ---
 arch/arm/mach-mxc91231/system.c                 |  51 --
 arch/arm/plat-mxc/Kconfig                       |   8 -
 arch/arm/plat-mxc/include/mach/common.h         |   7 -
 arch/arm/plat-mxc/include/mach/debug-macro.S    |   7 -
 arch/arm/plat-mxc/include/mach/hardware.h       |  13 -
 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 283 -----------
 arch/arm/plat-mxc/include/mach/irqs.h           |   2 -
 arch/arm/plat-mxc/include/mach/memory.h         |   3 -
 arch/arm/plat-mxc/include/mach/mxc.h            |  15 +-
 arch/arm/plat-mxc/include/mach/mxc91231.h       | 256 ----------
 arch/arm/plat-mxc/include/mach/system.h         |   6 -
 arch/arm/plat-mxc/include/mach/timex.h          |   2 -
 arch/arm/plat-mxc/system.c                      |   6 -
 arch/arm/plat-mxc/time.c                        |   2 +-
 25 files changed, 2 insertions(+), 2275 deletions(-)
 delete mode 100644 arch/arm/mach-mxc91231/Kconfig
 delete mode 100644 arch/arm/mach-mxc91231/Makefile
 delete mode 100644 arch/arm/mach-mxc91231/Makefile.boot
 delete mode 100644 arch/arm/mach-mxc91231/clock.c
 delete mode 100644 arch/arm/mach-mxc91231/crm_regs.h
 delete mode 100644 arch/arm/mach-mxc91231/devices.c
 delete mode 100644 arch/arm/mach-mxc91231/devices.h
 delete mode 100644 arch/arm/mach-mxc91231/iomux.c
 delete mode 100644 arch/arm/mach-mxc91231/magx-zn5.c
 delete mode 100644 arch/arm/mach-mxc91231/mm.c
 delete mode 100644 arch/arm/mach-mxc91231/system.c
 delete mode 100644 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/mxc91231.h

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5af05ab6587a..2b390306a091 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MX2)		:= imx
 machine-$(CONFIG_ARCH_MX25)		:= imx
 machine-$(CONFIG_ARCH_MX3)		:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
-machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig
deleted file mode 100644
index 8e5fa38ebb67..000000000000
--- a/arch/arm/mach-mxc91231/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if ARCH_MXC91231
-
-comment "MXC91231 platforms:"
-
-config MACH_MAGX_ZN5
-	bool "Support Motorola Zn5 GSM phone"
-	default n
-	help
-	  Include support for Motorola Zn5 GSM phone.
-
-endif
diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
deleted file mode 100644
index 011d5e197125..000000000000
--- a/arch/arm/mach-mxc91231/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-y	:= mm.o clock.o devices.o system.o iomux.o
-obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot
deleted file mode 100644
index 9939a19d99a1..000000000000
--- a/arch/arm/mach-mxc91231/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	:= 0x90008000
-params_phys-y	:= 0x90000100
-initrd_phys-y	:= 0x90800000
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
deleted file mode 100644
index 9fab505f1eb1..000000000000
--- a/arch/arm/mach-mxc91231/clock.c
+++ /dev/null
@@ -1,640 +0,0 @@
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include <asm/bug.h>
-#include <asm/div64.h>
-
-#include "crm_regs.h"
-
-#define CRM_SMALL_DIVIDER(base, name) \
-	crm_small_divider(base, \
-			  base ## _ ## name ## _OFFSET, \
-			  base ## _ ## name ## _MASK)
-#define CRM_1DIVIDER(base, name) \
-	crm_divider(base, \
-		    base ## _ ## name ## _OFFSET, \
-		    base ## _ ## name ## _MASK, 1)
-#define CRM_16DIVIDER(base, name) \
-	crm_divider(base, \
-		    base ## _ ## name ## _OFFSET, \
-		    base ## _ ## name ## _MASK, 16)
-
-static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
-{
-	static const u32 crm_small_dividers[] = {
-		2, 3, 4, 5, 6, 8, 10, 12
-	};
-	u8 idx;
-
-	idx = (__raw_readl(reg) & mask) >> offset;
-	if (idx > 7)
-		return 1;
-
-	return crm_small_dividers[idx];
-}
-
-static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
-{
-	u32 div;
-	div = (__raw_readl(reg) & mask) >> offset;
-	return div ? div : z;
-}
-
-static int _clk_1bit_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_1bit_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_3bit_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 0x7 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_3bit_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(0x7 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
-	return ckih_rate;
-}
-
-static struct clk ckih_clk = {
-	.get_rate = clk_ckih_get_rate,
-};
-
-static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
-{
-	return 2 * clk_get_rate(clk->parent);
-}
-
-static struct clk ckih_x2_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_ckih_x2_get_rate,
-};
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
-	return CKIL_CLK_FREQ;
-}
-
-static struct clk ckil_clk = {
-	.get_rate = clk_ckil_get_rate,
-};
-
-/* plls stuff */
-static struct clk mcu_pll_clk;
-static struct clk dsp_pll_clk;
-static struct clk usb_pll_clk;
-
-static struct clk *pll_clk(u8 sel)
-{
-	switch (sel) {
-	case 0:
-		return &mcu_pll_clk;
-	case 1:
-		return &dsp_pll_clk;
-	case 2:
-		return &usb_pll_clk;
-	}
-	BUG();
-}
-
-static void __iomem *pll_base(struct clk *clk)
-{
-	if (clk == &mcu_pll_clk)
-		return MXC_PLL0_BASE;
-	else if (clk == &dsp_pll_clk)
-		return MXC_PLL1_BASE;
-	else if (clk == &usb_pll_clk)
-		return MXC_PLL2_BASE;
-	BUG();
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
-	const void __iomem *pllbase;
-	unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
-	long mfn, mfn_abs, mfd, pdf;
-	s64 temp;
-	pllbase = pll_base(clk);
-
-	pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
-	if (pll_hfsm == 0) {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
-	} else {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
-	}
-
-	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
-	mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
-	mfi = (mfi <= 5) ? 5 : mfi;
-	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
-	mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
-	mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
-
-	if (mfn < 0)
-		mfn_abs = -mfn;
-	else
-		mfn_abs = mfn;
-
-/* XXX: actually this asumes that ckih is fed to pll, but spec says
- * that ckih_x2 is also possible. need to check this out.
- */
-	ref_clk = clk_get_rate(&ckih_clk);
-
-	ref_clk *= 2;
-	ref_clk /= pdf + 1;
-
-	temp = (u64) ref_clk * mfn_abs;
-	do_div(temp, mfd);
-	if (mfn < 0)
-		temp = -temp;
-	temp += ref_clk * mfi;
-
-	return temp;
-}
-
-static int clk_pll_enable(struct clk *clk)
-{
-	void __iomem *ctl;
-	u32 reg;
-
-	ctl = pll_base(clk);
-	reg = __raw_readl(ctl);
-	reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
-	__raw_writel(reg, ctl);
-	do {
-		reg = __raw_readl(ctl);
-	} while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
-	return 0;
-}
-
-static void clk_pll_disable(struct clk *clk)
-{
-	void __iomem *ctl;
-	u32 reg;
-
-	ctl = pll_base(clk);
-	reg = __raw_readl(ctl);
-	reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
-	__raw_writel(reg, ctl);
-}
-
-static struct clk mcu_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_pll_get_rate,
-	.enable = clk_pll_enable,
-	.disable = clk_pll_disable,
-};
-
-static struct clk dsp_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_pll_get_rate,
-	.enable = clk_pll_enable,
-	.disable = clk_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_pll_get_rate,
-	.enable = clk_pll_enable,
-	.disable = clk_pll_disable,
-};
-/* plls stuff end */
-
-/* ap_ref_clk stuff */
-static struct clk ap_ref_clk;
-
-static unsigned long clk_ap_ref_get_rate(struct clk *clk)
-{
-	u32 ascsr, acsr;
-	u8 ap_pat_ref_div_2, ap_isel, acs, ads;
-
-	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-	acsr = __raw_readl(MXC_CRMAP_ACSR);
-
-	/* 0 for ckih, 1 for ckih*2 */
-	ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
-	/* reg divider */
-	ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
-	/* undocumented, 1 for disabling divider */
-	ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
-	/* 0 for pat_ref, 1 for divider out */
-	acs = acsr & MXC_CRMAP_ACSR_ACS;
-
-	if (acs & !ads)
-		/* use divided clock */
-		return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
-
-	return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
-}
-
-static struct clk ap_ref_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_ap_ref_get_rate,
-};
-/* ap_ref_clk stuff end */
-
-/* ap_pre_dfs_clk stuff */
-static struct clk ap_pre_dfs_clk;
-
-static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
-{
-	u32 acsr, ascsr;
-
-	acsr = __raw_readl(MXC_CRMAP_ACSR);
-	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-
-	if (acsr & MXC_CRMAP_ACSR_ACS) {
-		u8 sel;
-		sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
-			MXC_CRMAP_ASCSR_APSEL_OFFSET;
-		return clk_get_rate(pll_clk(sel)) /
-			CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
-	}
-	return clk_get_rate(&ap_ref_clk);
-}
-
-static struct clk ap_pre_dfs_clk = {
-	.get_rate = clk_ap_pre_dfs_get_rate,
-};
-/* ap_pre_dfs_clk stuff end */
-
-/* usb_clk stuff */
-static struct clk usb_clk;
-
-static struct clk *clk_usb_parent(struct clk *clk)
-{
-	u32 acsr, ascsr;
-
-	acsr = __raw_readl(MXC_CRMAP_ACSR);
-	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-
-	if (acsr & MXC_CRMAP_ACSR_ACS) {
-		u8 sel;
-		sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
-			MXC_CRMAP_ASCSR_USBSEL_OFFSET;
-		return pll_clk(sel);
-	}
-	return &ap_ref_clk;
-}
-
-static unsigned long clk_usb_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) /
-		CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
-}
-
-static struct clk usb_clk = {
-	.enable_reg = MXC_CRMAP_ACDER2,
-	.enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
-	.get_rate = clk_usb_get_rate,
-	.enable = _clk_1bit_enable,
-	.disable = _clk_1bit_disable,
-};
-/* usb_clk stuff end */
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
-}
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) /
-		CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
-}
-
-static struct clk ipg_clk = {
-	.parent = &ap_pre_dfs_clk,
-	.get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ahb_clk = {
-	.parent = &ap_pre_dfs_clk,
-	.get_rate = clk_ahb_get_rate,
-};
-
-/* perclk_clk stuff */
-static struct clk perclk_clk;
-
-static unsigned long clk_perclk_get_rate(struct clk *clk)
-{
-	u32 acder2;
-
-	acder2 = __raw_readl(MXC_CRMAP_ACDER2);
-	if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
-		return 2 * clk_get_rate(clk->parent);
-
-	return clk_get_rate(clk->parent);
-}
-
-static struct clk perclk_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_perclk_get_rate,
-};
-/* perclk_clk stuff end */
-
-/* uart_clk stuff */
-static struct clk uart_clk[];
-
-static unsigned long clk_uart_get_rate(struct clk *clk)
-{
-	u32 div;
-
-	switch (clk->id) {
-	case 0:
-	case 1:
-		div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
-		break;
-	case 2:
-		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
-		break;
-	default:
-		BUG();
-	}
-	return clk_get_rate(clk->parent) / div;
-}
-
-static struct clk uart_clk[] = {
-	{
-		.id = 0,
-		.parent = &perclk_clk,
-		.enable_reg = MXC_CRMAP_APRA,
-		.enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
-		.get_rate = clk_uart_get_rate,
-		.enable = _clk_1bit_enable,
-		.disable = _clk_1bit_disable,
-	}, {
-		.id = 1,
-		.parent = &perclk_clk,
-		.enable_reg = MXC_CRMAP_APRA,
-		.enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
-		.get_rate = clk_uart_get_rate,
-		.enable = _clk_1bit_enable,
-		.disable = _clk_1bit_disable,
-	}, {
-		.id = 2,
-		.parent = &perclk_clk,
-		.enable_reg = MXC_CRMAP_APRA,
-		.enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
-		.get_rate = clk_uart_get_rate,
-		.enable = _clk_1bit_enable,
-		.disable = _clk_1bit_disable,
-	},
-};
-/* uart_clk stuff end */
-
-/* sdhc_clk stuff */
-static struct clk nfc_clk;
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) /
-		CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
-}
-
-static struct clk nfc_clk = {
-	.parent = &ahb_clk,
-	.enable_reg = MXC_CRMAP_ACDER2,
-	.enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
-	.get_rate = clk_nfc_get_rate,
-	.enable = _clk_1bit_enable,
-	.disable = _clk_1bit_disable,
-};
-/* sdhc_clk stuff end */
-
-/* sdhc_clk stuff */
-static struct clk sdhc_clk[];
-
-static struct clk *clk_sdhc_parent(struct clk *clk)
-{
-	u32 aprb;
-	u8 sel;
-	u32 mask;
-	int offset;
-
-	aprb = __raw_readl(MXC_CRMAP_APRB);
-
-	switch (clk->id) {
-	case 0:
-		mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
-		offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
-		break;
-	case 1:
-		mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
-		offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
-		break;
-	default:
-		BUG();
-	}
-	sel = (aprb & mask) >> offset;
-
-	switch (sel) {
-	case 0:
-		return &ckih_clk;
-	case 1:
-		return &ckih_x2_clk;
-	}
-	return &usb_clk;
-}
-
-static unsigned long clk_sdhc_get_rate(struct clk *clk)
-{
-	u32 div;
-
-	switch (clk->id) {
-	case 0:
-		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
-		break;
-	case 1:
-		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
-		break;
-	default:
-		BUG();
-	}
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int clk_sdhc_enable(struct clk *clk)
-{
-	u32 amlpmre1, aprb;
-
-	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
-	aprb = __raw_readl(MXC_CRMAP_APRB);
-	switch (clk->id) {
-	case 0:
-		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
-		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
-		break;
-	case 1:
-		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
-		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
-		break;
-	}
-	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
-	__raw_writel(aprb, MXC_CRMAP_APRB);
-	return 0;
-}
-
-static void clk_sdhc_disable(struct clk *clk)
-{
-	u32 amlpmre1, aprb;
-
-	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
-	aprb = __raw_readl(MXC_CRMAP_APRB);
-	switch (clk->id) {
-	case 0:
-		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
-		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
-		break;
-	case 1:
-		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
-		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
-		break;
-	}
-	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
-	__raw_writel(aprb, MXC_CRMAP_APRB);
-}
-
-static struct clk sdhc_clk[] = {
-	{
-		.id = 0,
-		.get_rate = clk_sdhc_get_rate,
-		.enable = clk_sdhc_enable,
-		.disable = clk_sdhc_disable,
-	}, {
-		.id = 1,
-		.get_rate = clk_sdhc_get_rate,
-		.enable = clk_sdhc_enable,
-		.disable = clk_sdhc_disable,
-	},
-};
-/* sdhc_clk stuff end */
-
-/* wdog_clk stuff */
-static struct clk wdog_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable_reg = MXC_CRMAP_AMLPMRD,
-		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
-		.enable = _clk_3bit_enable,
-		.disable = _clk_3bit_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable_reg = MXC_CRMAP_AMLPMRD,
-		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
-		.enable = _clk_3bit_enable,
-		.disable = _clk_3bit_disable,
-	},
-};
-/* wdog_clk stuff end */
-
-/* gpt_clk stuff */
-static struct clk gpt_clk = {
-	.parent = &ipg_clk,
-	.enable_reg = MXC_CRMAP_AMLPMRC,
-	.enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
-	.enable = _clk_3bit_enable,
-	.disable = _clk_3bit_disable,
-};
-/* gpt_clk stuff end */
-
-/* cspi_clk stuff */
-static struct clk cspi_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable_reg = MXC_CRMAP_AMLPMRE2,
-		.enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
-		.enable = _clk_3bit_enable,
-		.disable = _clk_3bit_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable_reg = MXC_CRMAP_AMLPMRE1,
-		.enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
-		.enable = _clk_3bit_enable,
-		.disable = _clk_3bit_disable,
-	},
-};
-/* cspi_clk stuff end */
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
-	_REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
-};
-
-int __init mxc91231_clocks_init(unsigned long fref)
-{
-	void __iomem *gpt_base;
-
-	ckih_rate = fref;
-
-	usb_clk.parent = clk_usb_parent(&usb_clk);
-	sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
-	sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
-	mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
-
-	return 0;
-}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
deleted file mode 100644
index b989baccd675..000000000000
--- a/arch/arm/mach-mxc91231/crm_regs.h
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright 2006 Freescale Semiconductor, Inc.
- * Copyright 2006-2007 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
-#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
-
-#define CKIL_CLK_FREQ			32768
-
-#define MXC_CRM_AP_BASE			MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
-#define MXC_CRM_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
-#define MXC_DSM_BASE			MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
-#define MXC_PLL0_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
-#define MXC_PLL1_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
-#define MXC_PLL2_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
-#define MXC_CLKCTL_BASE			MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL			0x00
-#define MXC_PLL_DP_CONFIG		0x04
-#define MXC_PLL_DP_OP			0x08
-#define MXC_PLL_DP_MFD			0x0C
-#define MXC_PLL_DP_MFN			0x10
-#define MXC_PLL_DP_HFS_OP		0x1C
-#define MXC_PLL_DP_HFS_MFD		0x20
-#define MXC_PLL_DP_HFS_MFN		0x24
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
-#define MXC_PLL_DP_CTL_ADE		0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
-#define MXC_PLL_DP_CTL_HFSM		0x80
-#define MXC_PLL_DP_CTL_PRE		0x40
-#define MXC_PLL_DP_CTL_UPEN		0x20
-#define MXC_PLL_DP_CTL_RST		0x10
-#define MXC_PLL_DP_CTL_RCP		0x8
-#define MXC_PLL_DP_CTL_PLM		0x4
-#define MXC_PLL_DP_CTL_BRM0		0x2
-#define MXC_PLL_DP_CTL_LRF		0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET	4
-#define MXC_PLL_DP_OP_MFI_MASK		0xF
-#define MXC_PLL_DP_OP_PDF_OFFSET	0
-#define MXC_PLL_DP_OP_PDF_MASK		0xF
-
-#define MXC_PLL_DP_MFD_OFFSET		0
-#define MXC_PLL_DP_MFD_MASK		0x7FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET		0
-#define MXC_PLL_DP_MFN_MASK		0x7FFFFFF
-
-/* CRM AP Register Offsets */
-#define MXC_CRMAP_ASCSR			(MXC_CRM_AP_BASE + 0x00)
-#define MXC_CRMAP_ACDR			(MXC_CRM_AP_BASE + 0x04)
-#define MXC_CRMAP_ACDER1		(MXC_CRM_AP_BASE + 0x08)
-#define MXC_CRMAP_ACDER2		(MXC_CRM_AP_BASE + 0x0C)
-#define MXC_CRMAP_ACGCR			(MXC_CRM_AP_BASE + 0x10)
-#define MXC_CRMAP_ACCGCR		(MXC_CRM_AP_BASE + 0x14)
-#define MXC_CRMAP_AMLPMRA		(MXC_CRM_AP_BASE + 0x18)
-#define MXC_CRMAP_AMLPMRB		(MXC_CRM_AP_BASE + 0x1C)
-#define MXC_CRMAP_AMLPMRC		(MXC_CRM_AP_BASE + 0x20)
-#define MXC_CRMAP_AMLPMRD		(MXC_CRM_AP_BASE + 0x24)
-#define MXC_CRMAP_AMLPMRE1		(MXC_CRM_AP_BASE + 0x28)
-#define MXC_CRMAP_AMLPMRE2		(MXC_CRM_AP_BASE + 0x2C)
-#define MXC_CRMAP_AMLPMRF		(MXC_CRM_AP_BASE + 0x30)
-#define MXC_CRMAP_AMLPMRG		(MXC_CRM_AP_BASE + 0x34)
-#define MXC_CRMAP_APGCR			(MXC_CRM_AP_BASE + 0x38)
-#define MXC_CRMAP_ACSR			(MXC_CRM_AP_BASE + 0x3C)
-#define MXC_CRMAP_ADCR			(MXC_CRM_AP_BASE + 0x40)
-#define MXC_CRMAP_ACR			(MXC_CRM_AP_BASE + 0x44)
-#define MXC_CRMAP_AMCR			(MXC_CRM_AP_BASE + 0x48)
-#define MXC_CRMAP_APCR			(MXC_CRM_AP_BASE + 0x4C)
-#define MXC_CRMAP_AMORA			(MXC_CRM_AP_BASE + 0x50)
-#define MXC_CRMAP_AMORB			(MXC_CRM_AP_BASE + 0x54)
-#define MXC_CRMAP_AGPR			(MXC_CRM_AP_BASE + 0x58)
-#define MXC_CRMAP_APRA			(MXC_CRM_AP_BASE + 0x5C)
-#define MXC_CRMAP_APRB			(MXC_CRM_AP_BASE + 0x60)
-#define MXC_CRMAP_APOR			(MXC_CRM_AP_BASE + 0x64)
-#define MXC_CRMAP_ADFMR			(MXC_CRM_AP_BASE + 0x68)
-
-/* CRM AP Register Bit definitions */
-#define MXC_CRMAP_ASCSR_CRS			0x10000
-#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET	15
-#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2		0x8000
-#define MXC_CRMAP_ASCSR_USBSEL_OFFSET		13
-#define MXC_CRMAP_ASCSR_USBSEL_MASK		(0x3 << 13)
-#define MXC_CRMAP_ASCSR_CSISEL_OFFSET		11
-#define MXC_CRMAP_ASCSR_CSISEL_MASK		(0x3 << 11)
-#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET		7
-#define MXC_CRMAP_ASCSR_SSI2SEL_MASK		(0x3 << 7)
-#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET		5
-#define MXC_CRMAP_ASCSR_SSI1SEL_MASK		(0x3 << 5)
-#define MXC_CRMAP_ASCSR_APSEL_OFFSET		3
-#define MXC_CRMAP_ASCSR_APSEL_MASK		(0x3 << 3)
-#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET	2
-#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1		0x4
-#define MXC_CRMAP_ASCSR_APISEL			0x1
-
-#define MXC_CRMAP_ACDR_ARMDIV_OFFSET		8
-#define MXC_CRMAP_ACDR_ARMDIV_MASK		(0xF << 8)
-#define MXC_CRMAP_ACDR_AHBDIV_OFFSET		4
-#define MXC_CRMAP_ACDR_AHBDIV_MASK		(0xF << 4)
-#define MXC_CRMAP_ACDR_IPDIV_OFFSET		0
-#define MXC_CRMAP_ACDR_IPDIV_MASK		0xF
-
-#define MXC_CRMAP_ACDER1_CSIEN_OFFSET		30
-#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET		24
-#define MXC_CRMAP_ACDER1_CSIDIV_MASK		(0x3F << 24)
-#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET		14
-#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET		8
-#define MXC_CRMAP_ACDER1_SSI2DIV_MASK		(0x3F << 8)
-#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET		6
-#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET		0
-#define MXC_CRMAP_ACDER1_SSI1DIV_MASK		0x3F
-
-#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET	24
-#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK	(0x7 << 24)
-#define MXC_CRMAP_ACDER2_NFCEN_OFFSET		20
-#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET		16
-#define MXC_CRMAP_ACDER2_NFCDIV_MASK		(0xF << 16)
-#define MXC_CRMAP_ACDER2_USBEN_OFFSET		12
-#define MXC_CRMAP_ACDER2_USBDIV_OFFSET		8
-#define MXC_CRMAP_ACDER2_USBDIV_MASK		(0xF << 8)
-#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET	5
-#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK		(0x3 << 5)
-#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET		0
-#define MXC_CRMAP_ACDER2_BAUDDIV_MASK		0xF
-
-#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET		22
-#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET		19
-#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK		(0x7 << 19)
-#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET		12
-#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET		9
-#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET		6
-#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET		3
-#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK		(0x7 << 3)
-
-#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET		0
-#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET		28
-#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK		(0x7 << 28)
-#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET		22
-#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET		16
-#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK		(0x7 << 16)
-#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET		12
-#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET		9
-#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET		6
-#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET		3
-#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK		(0x7 << 3)
-#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET		0
-#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET		22
-#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET		12
-#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET		9
-#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET		6
-#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET		0
-#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET	28
-#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK		(0x7 << 28)
-#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET	25
-#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK		(0x7 << 25)
-#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET	22
-#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET	19
-#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK		(0x7 << 19)
-#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET	16
-#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK		(0x7 << 16)
-#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET	12
-#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET	9
-#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET	6
-#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET	3
-#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK		(0x7 << 3)
-#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET	0
-#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET	0
-#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET		19
-#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK		(0x7 << 19)
-#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET		16
-#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK		(0x7 << 16)
-#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET		9
-#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET		6
-#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET		3
-#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK		(0x7 << 3)
-#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET		0
-#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK		(0x7 << 0)
-
-#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET		28
-#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK		(0x7 << 28)
-#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET		22
-#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET		19
-#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK		(0x7 << 19)
-#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET		16
-#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK		(0x7 << 16)
-#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET		12
-#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET		9
-#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET		6
-#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET		3
-#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK		(0x7 << 3)
-#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET		0
-#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK		0x7
-
-#define MXC_CRMAP_AGPR_IPUPAD_OFFSET		20
-#define MXC_CRMAP_AGPR_IPUPAD_MASK		(0x7 << 20)
-
-#define MXC_CRMAP_APRA_EL1TEN_OFFSET		29
-#define MXC_CRMAP_APRA_SIMEN_OFFSET		24
-#define MXC_CRMAP_APRA_UART3DIV_OFFSET		17
-#define MXC_CRMAP_APRA_UART3DIV_MASK		(0xF << 17)
-#define MXC_CRMAP_APRA_UART3EN_OFFSET		16
-#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET	14
-#define MXC_CRMAP_APRA_MQSPIEN_OFFSET		13
-#define MXC_CRMAP_APRA_UART2EN_OFFSET		8
-#define MXC_CRMAP_APRA_UART1EN_OFFSET		0
-
-#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET	13
-#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK		(0x7 << 13)
-#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET		9
-#define MXC_CRMAP_APRB_SDHC2_DIV_MASK		(0xF << 9)
-#define MXC_CRMAP_APRB_SDHC2EN_OFFSET		8
-#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET	5
-#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK		(0x7 << 5)
-#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET		1
-#define MXC_CRMAP_APRB_SDHC1_DIV_MASK		(0xF << 1)
-#define MXC_CRMAP_APRB_SDHC1EN_OFFSET		0
-
-#define MXC_CRMAP_ACSR_ADS_OFFSET		8
-#define MXC_CRMAP_ACSR_ADS			(0x1 << 8)
-#define MXC_CRMAP_ACSR_ACS			0x1
-
-#define MXC_CRMAP_ADCR_LFDF_0			(0x0 << 8)
-#define MXC_CRMAP_ADCR_LFDF_2			(0x1 << 8)
-#define MXC_CRMAP_ADCR_LFDF_4			(0x2 << 8)
-#define MXC_CRMAP_ADCR_LFDF_8			(0x3 << 8)
-#define MXC_CRMAP_ADCR_LFDF_OFFSET		8
-#define MXC_CRMAP_ADCR_LFDF_MASK		(0x3 << 8)
-#define MXC_CRMAP_ADCR_ALT_PLL			0x80
-#define MXC_CRMAP_ADCR_DFS_DIVEN		0x20
-#define MXC_CRMAP_ADCR_DIV_BYP			0x2
-#define MXC_CRMAP_ADCR_VSTAT			0x8
-#define MXC_CRMAP_ADCR_TSTAT			0x10
-#define MXC_CRMAP_ADCR_DVFS_VCTRL		0x10
-#define MXC_CRMAP_ADCR_CLK_ON			0x40
-
-#define MXC_CRMAP_ADFMR_FC_OFFSET		16
-#define MXC_CRMAP_ADFMR_FC_MASK			(0x1F << 16)
-#define MXC_CRMAP_ADFMR_MF_OFFSET		1
-#define MXC_CRMAP_ADFMR_MF_MASK			(0x3FF << 1)
-#define MXC_CRMAP_ADFMR_DFM_CLK_READY		0x1
-#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN		0x8000
-
-#define MXC_CRMAP_ACR_CKOHS_HIGH		(1 << 18)
-#define MXC_CRMAP_ACR_CKOS_HIGH			(1 << 16)
-#define MXC_CRMAP_ACR_CKOHS_MASK		(0x7 << 12)
-#define MXC_CRMAP_ACR_CKOHD			(1 << 11)
-#define MXC_CRMAP_ACR_CKOHDIV_MASK		(0xF << 8)
-#define MXC_CRMAP_ACR_CKOHDIV_OFFSET		8
-#define MXC_CRMAP_ACR_CKOD			(1 << 7)
-#define MXC_CRMAP_ACR_CKOS_MASK			(0x7 << 4)
-
-/* AP Warm reset */
-#define MXC_CRMAP_AMCR_SW_AP			(1 << 14)
-
-/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
-#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT		0x00000001
-#define MXC_CRMAP_ACGCR_ACG0_STOP		0x00000003
-#define MXC_CRMAP_ACGCR_ACG0_RUN		0x00000007
-#define MXC_CRMAP_ACGCR_ACG0_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT		0x00000008
-#define MXC_CRMAP_ACGCR_ACG1_STOP		0x00000018
-#define MXC_CRMAP_ACGCR_ACG1_RUN		0x00000038
-#define MXC_CRMAP_ACGCR_ACG1_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT		0x00000040
-#define MXC_CRMAP_ACGCR_ACG2_STOP		0x000000C0
-#define MXC_CRMAP_ACGCR_ACG2_RUN		0x000001C0
-#define MXC_CRMAP_ACGCR_ACG2_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT		0x00000200
-#define MXC_CRMAP_ACGCR_ACG3_STOP		0x00000600
-#define MXC_CRMAP_ACGCR_ACG3_RUN		0x00000E00
-#define MXC_CRMAP_ACGCR_ACG3_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT		0x00001000
-#define MXC_CRMAP_ACGCR_ACG4_STOP		0x00003000
-#define MXC_CRMAP_ACGCR_ACG4_RUN		0x00007000
-#define MXC_CRMAP_ACGCR_ACG4_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT		0x00010000
-#define MXC_CRMAP_ACGCR_ACG5_STOP		0x00030000
-#define MXC_CRMAP_ACGCR_ACG5_RUN		0x00070000
-#define MXC_CRMAP_ACGCR_ACG5_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT		0x00080000
-#define MXC_CRMAP_ACGCR_ACG6_STOP		0x00180000
-#define MXC_CRMAP_ACGCR_ACG6_RUN		0x00380000
-#define MXC_CRMAP_ACGCR_ACG6_DISABLED		0x00000000
-
-#define NUM_GATE_CTRL				6
-
-/* CRM COM Register Offsets */
-#define MXC_CRMCOM_CSCR				(MXC_CRM_COM_BASE + 0x0C)
-#define MXC_CRMCOM_CCCR				(MXC_CRM_COM_BASE + 0x10)
-
-/* CRM COM Bit Definitions */
-#define MXC_CRMCOM_CSCR_PPD1			0x08000000
-#define MXC_CRMCOM_CSCR_CKOHSEL			(1 << 18)
-#define MXC_CRMCOM_CSCR_CKOSEL			(1 << 17)
-#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET		8
-#define MXC_CRMCOM_CCCR_CC_DIV_MASK		(0x1F << 8)
-#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET		0
-#define MXC_CRMCOM_CCCR_CC_SEL_MASK		0x3
-
-/* DSM Register Offsets */
-#define MXC_DSM_SLEEP_TIME			(MXC_DSM_BASE + 0x0c)
-#define MXC_DSM_CONTROL0			(MXC_DSM_BASE + 0x20)
-#define MXC_DSM_CONTROL1			(MXC_DSM_BASE + 0x24)
-#define MXC_DSM_CTREN				(MXC_DSM_BASE + 0x28)
-#define MXC_DSM_WARM_PER			(MXC_DSM_BASE + 0x40)
-#define MXC_DSM_LOCK_PER			(MXC_DSM_BASE + 0x44)
-#define MXC_DSM_MGPER				(MXC_DSM_BASE + 0x4c)
-#define MXC_DSM_CRM_CONTROL			(MXC_DSM_BASE + 0x50)
-
-/* Bit definitions of various registers in DSM */
-#define MXC_DSM_CRM_CTRL_DVFS_BYP		0x00000008
-#define MXC_DSM_CRM_CTRL_DVFS_VCTRL		0x00000004
-#define MXC_DSM_CRM_CTRL_LPMD1			0x00000002
-#define MXC_DSM_CRM_CTRL_LPMD0			0x00000001
-#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE		0x00000000
-#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE		0x00000001
-#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE		0x00000003
-#define MXC_DSM_CONTROL0_STBY_COMMIT_EN		0x00000200
-#define MXC_DSM_CONTROL0_MSTR_EN		0x00000001
-#define MXC_DSM_CONTROL0_RESTART		0x00000010
-/* Counter Block reset */
-#define MXC_DSM_CONTROL1_CB_RST			0x00000002
-/* State Machine reset */
-#define MXC_DSM_CONTROL1_SM_RST			0x00000004
-/* Bit needed to reset counter block */
-#define MXC_CONTROL1_RST_CNT32			0x00000008
-#define MXC_DSM_CONTROL1_RST_CNT32_EN		0x00000800
-#define MXC_DSM_CONTROL1_SLEEP			0x00000100
-#define MXC_DSM_CONTROL1_WAKEUP_DISABLE		0x00004000
-#define MXC_DSM_CTREN_CNT32			0x00000001
-
-/* Magic Fix enable bit */
-#define MXC_DSM_MGPER_EN_MGFX			0x80000000
-#define MXC_DSM_MGPER_PER_MASK			0x000003FF
-#define MXC_DSM_MGPER_PER(n)			(MXC_DSM_MGPER_PER_MASK & n)
-
-/* Address offsets of the CLKCTL registers */
-#define MXC_CLKCTL_GP_CTRL	(MXC_CLKCTL_BASE + 0x00)
-#define MXC_CLKCTL_GP_SER	(MXC_CLKCTL_BASE + 0x04)
-#define MXC_CLKCTL_GP_CER	(MXC_CLKCTL_BASE + 0x08)
-
-#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
deleted file mode 100644
index 027af4f0d18a..000000000000
--- a/arch/arm/mach-mxc91231/devices.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/imx-uart.h>
-
-static struct resource uart0[] = {
-	{
-		.start = MXC91231_UART1_BASE_ADDR,
-		.end = MXC91231_UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_UART1_RX,
-		.end = MXC91231_INT_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART1_TX,
-		.end = MXC91231_INT_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART1_MINT,
-		.end = MXC91231_INT_UART1_MINT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = MXC91231_UART2_BASE_ADDR,
-		.end = MXC91231_UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_UART2_RX,
-		.end = MXC91231_INT_UART2_RX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART2_TX,
-		.end = MXC91231_INT_UART2_TX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART2_MINT,
-		.end = MXC91231_INT_UART2_MINT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = MXC91231_UART3_BASE_ADDR,
-		.end = MXC91231_UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_UART3_RX,
-		.end = MXC91231_INT_UART3_RX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART3_TX,
-		.end = MXC91231_INT_UART3_TX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART3_MINT,
-		.end = MXC91231_INT_UART3_MINT,
-		.flags = IORESOURCE_IRQ,
-
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port mxc_gpio_ports[] = {
-	[0] = {
-		.chip.label = "gpio-0",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO1,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
-		.chip.label = "gpio-1",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO2,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
-		.chip.label = "gpio-2",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO3,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	},
-	[3] = {
-		.chip.label = "gpio-3",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO4,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	},
-};
-
-int __init mxc91231_register_gpios(void)
-{
-	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= MXC91231_NFC_BASE_ADDR,
-		.end	= MXC91231_NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= MXC91231_INT_NANDFC,
-		.end	= MXC91231_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
-
-static struct resource mxc_sdhc0_resources[] = {
-	{
-		.start = MXC91231_MMC_SDHC1_BASE_ADDR,
-		.end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_MMC_SDHC1,
-		.end = MXC91231_INT_MMC_SDHC1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_sdhc1_resources[] = {
-	{
-		.start = MXC91231_MMC_SDHC2_BASE_ADDR,
-		.end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_MMC_SDHC2,
-		.end = MXC91231_INT_MMC_SDHC2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_sdhc_device0 = {
-	.name = "mxc-mmc",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
-	.resource = mxc_sdhc0_resources,
-};
-
-struct platform_device mxc_sdhc_device1 = {
-	.name = "mxc-mmc",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
-	.resource = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_cspi0_resources[] = {
-	{
-		.start = MXC91231_CSPI1_BASE_ADDR,
-		.end = MXC91231_CSPI1_BASE_ADDR + 0x20,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_CSPI1,
-		.end = MXC91231_INT_CSPI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_cspi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_cspi0_resources),
-	.resource = mxc_cspi0_resources,
-};
-
-static struct resource mxc_cspi1_resources[] = {
-	{
-		.start = MXC91231_CSPI2_BASE_ADDR,
-		.end = MXC91231_CSPI2_BASE_ADDR + 0x20,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_CSPI2,
-		.end = MXC91231_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_cspi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_cspi1_resources),
-	.resource = mxc_cspi1_resources,
-};
-
-static struct resource mxc_wdog0_resources[] = {
-	{
-		.start = MXC91231_WDOG1_BASE_ADDR,
-		.end = MXC91231_WDOG1_BASE_ADDR + 0x10,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_wdog_device0 = {
-	.name = "mxc-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdog0_resources),
-	.resource = mxc_wdog0_resources,
-};
diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h
deleted file mode 100644
index 72a2136ce27d..000000000000
--- a/arch/arm/mach-mxc91231/devices.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-
-extern struct platform_device mxc_nand_device;
-
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-
-extern struct platform_device mxc_cspi_device0;
-extern struct platform_device mxc_cspi_device1;
-
-extern struct platform_device mxc_wdog_device0;
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
deleted file mode 100644
index 66fc41cbf2ca..000000000000
--- a/arch/arm/mach-mxc91231/iomux.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/iomux-mxc91231.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_AP_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
-#define IOMUX_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
-#define IOMUXSW_AP_MUX_CTL	(IOMUX_AP_BASE + 0x000)
-#define IOMUXSW_SP_MUX_CTL	(IOMUX_COM_BASE + 0x000)
-#define IOMUXSW_PAD_CTL		(IOMUX_COM_BASE + 0x200)
-
-#define IOMUXINT_OBS1		(IOMUX_AP_BASE + 0x600)
-#define IOMUXINT_OBS2		(IOMUX_AP_BASE + 0x004)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define NB_PORTS			((PIN_MAX + 32) / 32)
-#define PIN_GLOBAL_NUM(pin) \
-	(((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX +	\
-	 ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 +		\
-	 ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
-	u32 side, field, l, mode, ret = 0;
-	void __iomem *reg;
-
-	side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
-	switch (side) {
-	case MUX_SIDE_AP:
-		reg = IOMUXSW_AP_MUX_CTL;
-		break;
-	case MUX_SIDE_SP:
-		reg = IOMUXSW_SP_MUX_CTL;
-		break;
-	default:
-		return -EINVAL;
-	}
-	reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
-	field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
-	mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0xff << (field * 8));
-	l |= mode << (field * 8);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
-	u32 padgrp, field, l;
-	void __iomem *reg;
-
-	padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
-	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
-	field = (pin + 2) % 3;
-
-	pr_debug("%s: reg offset = 0x%x, field = %d\n",
-			__func__, (pin + 2) / 3, field);
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0x1ff << (field * 10));
-	l |= config << (field * 10);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label)
-{
-	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
-	if (pad >= (PIN_MAX + 1)) {
-		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
-			pad, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
-		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
-			pad, label ? label : "?");
-		return -EBUSY;
-	}
-	mxc_iomux_mode(pin_mode);
-
-	return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
-		const char *label)
-{
-	const unsigned int *p = pin_list;
-	int i;
-	int ret = -EINVAL;
-
-	for (i = 0; i < count; i++) {
-		ret = mxc_iomux_alloc_pin(*p, label);
-		if (ret)
-			goto setup_error;
-		p++;
-	}
-	return 0;
-
-setup_error:
-	mxc_iomux_release_multiple_pins(pin_list, i);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(unsigned int pin_mode)
-{
-	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
-
-	if (pad < (PIN_MAX + 1))
-		clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
-{
-	const unsigned int *p = pin_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_release_pin(*p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
deleted file mode 100644
index f31a45e5a0b8..000000000000
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mxc91231.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-
-#include "devices.h"
-
-static struct imxuart_platform_data uart_pdata = {
-};
-
-static struct imxmmc_platform_data sdhc_pdata = {
-};
-
-static void __init zn5_init(void)
-{
-	pm_power_off = mxc91231_power_off;
-
-	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
-	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
-
-	mxc_register_device(&mxc_wdog_device0, NULL);
-
-	return;
-}
-
-static void __init zn5_timer_init(void)
-{
-	mxc91231_clocks_init(26000000); /* 26mhz ckih */
-}
-
-struct sys_timer zn5_timer = {
-	.init = zn5_timer_init,
-};
-
-MACHINE_START(MAGX_ZN5, "Motorola Zn5")
-	.boot_params = MXC91231_PHYS_OFFSET + 0x100,
-	.map_io = mxc91231_map_io,
-	.init_early = mxc91231_init_early,
-	.init_irq = mxc91231_init_irq,
-	.timer = &zn5_timer,
-	.init_machine = zn5_init,
-MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
deleted file mode 100644
index a77f6daf6a26..000000000000
--- a/arch/arm/mach-mxc91231/mm.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MXC specific definitions
- *  Copyright 2006 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-/*
- * This structure defines the MXC memory map.
- */
-static struct map_desc mxc91231_io_desc[] __initdata = {
-	imx_map_entry(MXC91231, L2CC, MT_DEVICE),
-	imx_map_entry(MXC91231, X_MEMC, MT_DEVICE),
-	imx_map_entry(MXC91231, ROMP, MT_DEVICE),
-	imx_map_entry(MXC91231, AVIC, MT_DEVICE),
-	imx_map_entry(MXC91231, AIPS1, MT_DEVICE),
-	imx_map_entry(MXC91231, SPBA0, MT_DEVICE),
-	imx_map_entry(MXC91231, SPBA1, MT_DEVICE),
-	imx_map_entry(MXC91231, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory map for
- * the IO modules.
- */
-void __init mxc91231_map_io(void)
-{
-	iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc));
-}
-
-void __init mxc91231_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MXC91231);
-}
-
-int mxc91231_register_gpios(void);
-
-void __init mxc91231_init_irq(void)
-{
-	mxc91231_register_gpios();
-	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
-}
diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
deleted file mode 100644
index 736f7efd874a..000000000000
--- a/arch/arm/mach-mxc91231/system.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/proc-fns.h>
-#include <mach/hardware.h>
-
-#include "crm_regs.h"
-
-#define WDOG_WCR		MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
-#define WDOG_WCR_OUT_ENABLE	(1 << 6)
-#define WDOG_WCR_ASSERT		(1 << 5)
-
-void mxc91231_power_off(void)
-{
-	u16 wcr;
-
-	wcr = __raw_readw(WDOG_WCR);
-	wcr |= WDOG_WCR_OUT_ENABLE;
-	wcr &= ~WDOG_WCR_ASSERT;
-	__raw_writew(wcr, WDOG_WCR);
-}
-
-void mxc91231_arch_reset(char mode, const char *cmd)
-{
-	u32 amcr;
-
-	/* Reset the AP using CRM */
-	amcr = __raw_readl(MXC_CRMAP_AMCR);
-	amcr &= ~MXC_CRMAP_AMCR_SW_AP;
-	__raw_writel(amcr, MXC_CRMAP_AMCR);
-
-	mdelay(10);
-	cpu_reset(0);
-}
-
-void mxc91231_prepare_idle(void)
-{
-	u32 crm_ctl;
-
-	/* Go to WAIT mode after WFI */
-	crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
-	crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
-	crm_ctl |=  MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
-	__raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
-}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8d183c5a239e..97f12a422cb1 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -30,13 +30,6 @@ config ARCH_MX3
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
-config ARCH_MXC91231
-	bool "MXC91231-based"
-	select CPU_V6
-	select MXC_AVIC
-	help
-	  This enables support for systems based on the Freescale MXC91231 family
-
 config ARCH_MX5
 	bool "MX5-based"
 	select CPU_V7
@@ -47,7 +40,6 @@ config ARCH_MX5
 endchoice
 
 source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-mxc91231/Kconfig"
 source "arch/arm/mach-mx5/Kconfig"
 
 endmenu
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index bfa1ffca5d79..da7991832af6 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -23,7 +23,6 @@ extern void mx35_map_io(void);
 extern void mx50_map_io(void);
 extern void mx51_map_io(void);
 extern void mx53_map_io(void);
-extern void mxc91231_map_io(void);
 extern void imx1_init_early(void);
 extern void imx21_init_early(void);
 extern void imx25_init_early(void);
@@ -33,7 +32,6 @@ extern void imx35_init_early(void);
 extern void imx50_init_early(void);
 extern void imx51_init_early(void);
 extern void imx53_init_early(void);
-extern void mxc91231_init_early(void);
 extern void mxc_init_irq(void __iomem *);
 extern void tzic_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
@@ -45,7 +43,6 @@ extern void mx35_init_irq(void);
 extern void mx50_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mx53_init_irq(void);
-extern void mxc91231_init_irq(void);
 extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
@@ -58,14 +55,10 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
-extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);
-extern void mxc91231_power_off(void);
-extern void mxc91231_arch_reset(int, const char *);
-extern void mxc91231_prepare_idle(void);
 extern void mx51_efikamx_reset(void);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 3b3a37c25c56..8e8d175e5077 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,13 +44,6 @@
 #define UART_PADDR	MX51_UART1_BASE_ADDR
 #endif
 
-#ifdef CONFIG_ARCH_MXC91231
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
-#define UART_PADDR	MXC91231_UART2_BASE_ADDR
-#endif
-
 #define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)
 
 		.macro	addruart, rp, rv
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 26bb1bab4aeb..a881db5c395e 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -86,15 +86,6 @@
  *	SPBA0	0x70000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x73f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x83f00000+0x100000	->	0xf4300000+0x100000
- * mxc91231:
- *	L2CC	0x30000000+0x010000	->	0xf4400000+0x010000
- *	X_MEMC	0xb8000000+0x010000	->	0xf4c00000+0x010000
- *	ROMP	0x60000000+0x010000	->	0xf5000000+0x010000
- *	AVIC	0x68000000+0x010000	->	0xf5800000+0x010000
- *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
- *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- *	SPBA1	0x52000000+0x100000	->	0xf5600000+0x100000
- *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
  */
 #define IMX_IO_P2V(x)	(						\
 			0xf4000000 +					\
@@ -134,10 +125,6 @@
 # include <mach/mx25.h>
 #endif
 
-#ifdef CONFIG_ARCH_MXC91231
-# include <mach/mxc91231.h>
-#endif
-
 #include <mach/mxc.h>
 
 #define imx_map_entry(soc, name, _type)	{				\
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
deleted file mode 100644
index bf28df0d58b7..000000000000
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_IOMUX_MXC91231_H__
-#define __MACH_IOMUX_MXC91231_H__
-
-/*
- * various IOMUX output functions
- */
-
-#define	IOMUX_OCONFIG_GPIO (0 << 4)	/* used as GPIO */
-#define	IOMUX_OCONFIG_FUNC (1 << 4)	/* used as function */
-#define	IOMUX_OCONFIG_ALT1 (2 << 4)	/* used as alternate function 1 */
-#define	IOMUX_OCONFIG_ALT2 (3 << 4)	/* used as alternate function 2 */
-#define	IOMUX_OCONFIG_ALT3 (4 << 4)	/* used as alternate function 3 */
-#define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
-#define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
-#define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
-#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
-#define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
-#define	IOMUX_ICONFIG_FUNC  2		/* used as function */
-#define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
-#define	IOMUX_ICONFIG_ALT2  8		/* used as alternate function 2 */
-
-#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
-#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
-#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
-#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
-
-/*
- * setups a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
- */
-int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label);
-/*
- * setups mutliple pins
- * convenient way to call the above function with tables
- */
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
-		const char *label);
-
-/*
- * releases a single pin:
- * 	- make it available for a future use by another driver
- * 	- frees the GPIO if the pin was configured as GPIO
- * 	- DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_release_pin(unsigned int pin_mode);
-/*
- * releases multiple pins
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
-
-#define MUX_SIDE_AP		(0)
-#define MUX_SIDE_SP		(1)
-
-#define MUX_SIDE_SHIFT		(26)
-#define MUX_SIDE_MASK		(0x1 << MUX_SIDE_SHIFT)
-
-#define MUX_GPIO_PORT_SHIFT	(23)
-#define MUX_GPIO_PORT_MASK	(0x7 << MUX_GPIO_PORT_SHIFT)
-
-#define MUX_GPIO_PIN_SHIFT	(20)
-#define MUX_GPIO_PIN_MASK	(0x1f << MUX_GPIO_PIN_SHIFT)
-
-#define MUX_REG_SHIFT		(15)
-#define MUX_REG_MASK		(0x1f << MUX_REG_SHIFT)
-
-#define MUX_FIELD_SHIFT		(13)
-#define MUX_FIELD_MASK		(0x3 << MUX_FIELD_SHIFT)
-
-#define MUX_PADGRP_SHIFT	(8)
-#define MUX_PADGRP_MASK		(0x1f << MUX_PADGRP_SHIFT)
-
-#define MUX_PIN_MASK		(0xffffff << 8)
-
-#define GPIO_PORT_MAX		(3)
-
-#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
-	(((side) << MUX_SIDE_SHIFT) |		  \
-	 (gport << MUX_GPIO_PORT_SHIFT) |		\
-	 ((gpin) << MUX_GPIO_PIN_SHIFT) |		\
-	 ((ctlreg) << MUX_REG_SHIFT) |		\
-	 ((ctlfield) << MUX_FIELD_SHIFT) |		\
-	 ((padgrp) << MUX_PADGRP_SHIFT))
-
-#define MUX_MODE_OUT_SHIFT	(4)
-#define MUX_MODE_IN_SHIFT	(0)
-#define MUX_MODE_SHIFT		(0)
-#define MUX_MODE_MASK		(0xff << MUX_MODE_SHIFT)
-
-#define IOMUX_MODE(pin, mode) \
-	(pin | (mode << MUX_MODE_SHIFT))
-
-enum iomux_pins {
-	/* AP Side pins */
-	MXC91231_PIN_AP_CLE		= IOMUX_PIN(0, 0,  0,  0, 0, 24),
-	MXC91231_PIN_AP_ALE		= IOMUX_PIN(0, 0,  1,  0, 1, 24),
-	MXC91231_PIN_AP_CE_B		= IOMUX_PIN(0, 0,  2,  0, 2, 24),
-	MXC91231_PIN_AP_RE_B		= IOMUX_PIN(0, 0,  3,  0, 3, 24),
-	MXC91231_PIN_AP_WE_B		= IOMUX_PIN(0, 0,  4,  1, 0, 24),
-	MXC91231_PIN_AP_WP_B		= IOMUX_PIN(0, 0,  5,  1, 1, 24),
-	MXC91231_PIN_AP_BSY_B		= IOMUX_PIN(0, 0,  6,  1, 2, 24),
-	MXC91231_PIN_AP_U1_TXD		= IOMUX_PIN(0, 0,  7,  1, 3, 28),
-	MXC91231_PIN_AP_U1_RXD		= IOMUX_PIN(0, 0,  8,  2, 0, 28),
-	MXC91231_PIN_AP_U1_RTS_B	= IOMUX_PIN(0, 0,  9,  2, 1, 28),
-	MXC91231_PIN_AP_U1_CTS_B	= IOMUX_PIN(0, 0, 10,  2, 2, 28),
-	MXC91231_PIN_AP_AD1_TXD		= IOMUX_PIN(0, 0, 11,  2, 3,  9),
-	MXC91231_PIN_AP_AD1_RXD		= IOMUX_PIN(0, 0, 12,  3, 0,  9),
-	MXC91231_PIN_AP_AD1_TXC		= IOMUX_PIN(0, 0, 13,  3, 1,  9),
-	MXC91231_PIN_AP_AD1_TXFS	= IOMUX_PIN(0, 0, 14,  3, 2,  9),
-	MXC91231_PIN_AP_AD2_TXD		= IOMUX_PIN(0, 0, 15,  3, 3,  9),
-	MXC91231_PIN_AP_AD2_RXD		= IOMUX_PIN(0, 0, 16,  4, 0,  9),
-	MXC91231_PIN_AP_AD2_TXC		= IOMUX_PIN(0, 0, 17,  4, 1,  9),
-	MXC91231_PIN_AP_AD2_TXFS	= IOMUX_PIN(0, 0, 18,  4, 2,  9),
-	MXC91231_PIN_AP_OWDAT		= IOMUX_PIN(0, 0, 19,  4, 3, 28),
-	MXC91231_PIN_AP_IPU_LD17	= IOMUX_PIN(0, 0, 20,  5, 0, 28),
-	MXC91231_PIN_AP_IPU_D3_VSYNC	= IOMUX_PIN(0, 0, 21,  5, 1, 28),
-	MXC91231_PIN_AP_IPU_D3_HSYNC	= IOMUX_PIN(0, 0, 22,  5, 2, 28),
-	MXC91231_PIN_AP_IPU_D3_CLK	= IOMUX_PIN(0, 0, 23,  5, 3, 28),
-	MXC91231_PIN_AP_IPU_D3_DRDY	= IOMUX_PIN(0, 0, 24,  6, 0, 28),
-	MXC91231_PIN_AP_IPU_D3_CONTR	= IOMUX_PIN(0, 0, 25,  6, 1, 28),
-	MXC91231_PIN_AP_IPU_D0_CS	= IOMUX_PIN(0, 0, 26,  6, 2, 28),
-	MXC91231_PIN_AP_IPU_LD16	= IOMUX_PIN(0, 0, 27,  6, 3, 28),
-	MXC91231_PIN_AP_IPU_D2_CS	= IOMUX_PIN(0, 0, 28,  7, 0, 28),
-	MXC91231_PIN_AP_IPU_PAR_RS	= IOMUX_PIN(0, 0, 29,  7, 1, 28),
-	MXC91231_PIN_AP_IPU_D3_PS	= IOMUX_PIN(0, 0, 30,  7, 2, 28),
-	MXC91231_PIN_AP_IPU_D3_CLS	= IOMUX_PIN(0, 0, 31,  7, 3, 28),
-	MXC91231_PIN_AP_IPU_RD		= IOMUX_PIN(0, 1,  0,  8, 0, 28),
-	MXC91231_PIN_AP_IPU_WR		= IOMUX_PIN(0, 1,  1,  8, 1, 28),
-	MXC91231_PIN_AP_IPU_LD0		= IOMUX_PIN(0, 7,  0,  8, 2, 28),
-	MXC91231_PIN_AP_IPU_LD1		= IOMUX_PIN(0, 7,  0,  8, 3, 28),
-	MXC91231_PIN_AP_IPU_LD2		= IOMUX_PIN(0, 7,  0,  9, 0, 28),
-	MXC91231_PIN_AP_IPU_LD3		= IOMUX_PIN(0, 1,  2,  9, 1, 28),
-	MXC91231_PIN_AP_IPU_LD4		= IOMUX_PIN(0, 1,  3,  9, 2, 28),
-	MXC91231_PIN_AP_IPU_LD5		= IOMUX_PIN(0, 1,  4,  9, 3, 28),
-	MXC91231_PIN_AP_IPU_LD6		= IOMUX_PIN(0, 1,  5, 10, 0, 28),
-	MXC91231_PIN_AP_IPU_LD7		= IOMUX_PIN(0, 1,  6, 10, 1, 28),
-	MXC91231_PIN_AP_IPU_LD8		= IOMUX_PIN(0, 1,  7, 10, 2, 28),
-	MXC91231_PIN_AP_IPU_LD9		= IOMUX_PIN(0, 1,  8, 10, 3, 28),
-	MXC91231_PIN_AP_IPU_LD10	= IOMUX_PIN(0, 1,  9, 11, 0, 28),
-	MXC91231_PIN_AP_IPU_LD11	= IOMUX_PIN(0, 1, 10, 11, 1, 28),
-	MXC91231_PIN_AP_IPU_LD12	= IOMUX_PIN(0, 1, 11, 11, 2, 28),
-	MXC91231_PIN_AP_IPU_LD13	= IOMUX_PIN(0, 1, 12, 11, 3, 28),
-	MXC91231_PIN_AP_IPU_LD14	= IOMUX_PIN(0, 1, 13, 12, 0, 28),
-	MXC91231_PIN_AP_IPU_LD15	= IOMUX_PIN(0, 1, 14, 12, 1, 28),
-	MXC91231_PIN_AP_KPROW4		= IOMUX_PIN(0, 7,  0, 12, 2, 10),
-	MXC91231_PIN_AP_KPROW5		= IOMUX_PIN(0, 1, 16, 12, 3, 10),
-	MXC91231_PIN_AP_GPIO_AP_B17	= IOMUX_PIN(0, 1, 17, 13, 0, 10),
-	MXC91231_PIN_AP_GPIO_AP_B18	= IOMUX_PIN(0, 1, 18, 13, 1, 10),
-	MXC91231_PIN_AP_KPCOL3		= IOMUX_PIN(0, 1, 19, 13, 2, 11),
-	MXC91231_PIN_AP_KPCOL4		= IOMUX_PIN(0, 1, 20, 13, 3, 11),
-	MXC91231_PIN_AP_KPCOL5		= IOMUX_PIN(0, 1, 21, 14, 0, 11),
-	MXC91231_PIN_AP_GPIO_AP_B22	= IOMUX_PIN(0, 1, 22, 14, 1, 11),
-	MXC91231_PIN_AP_GPIO_AP_B23	= IOMUX_PIN(0, 1, 23, 14, 2, 11),
-	MXC91231_PIN_AP_CSI_D0		= IOMUX_PIN(0, 1, 24, 14, 3, 21),
-	MXC91231_PIN_AP_CSI_D1		= IOMUX_PIN(0, 1, 25, 15, 0, 21),
-	MXC91231_PIN_AP_CSI_D2		= IOMUX_PIN(0, 1, 26, 15, 1, 21),
-	MXC91231_PIN_AP_CSI_D3		= IOMUX_PIN(0, 1, 27, 15, 2, 21),
-	MXC91231_PIN_AP_CSI_D4		= IOMUX_PIN(0, 1, 28, 15, 3, 21),
-	MXC91231_PIN_AP_CSI_D5		= IOMUX_PIN(0, 1, 29, 16, 0, 21),
-	MXC91231_PIN_AP_CSI_D6		= IOMUX_PIN(0, 1, 30, 16, 1, 21),
-	MXC91231_PIN_AP_CSI_D7		= IOMUX_PIN(0, 1, 31, 16, 2, 21),
-	MXC91231_PIN_AP_CSI_D8		= IOMUX_PIN(0, 2,  0, 16, 3, 21),
-	MXC91231_PIN_AP_CSI_D9		= IOMUX_PIN(0, 2,  1, 17, 0, 21),
-	MXC91231_PIN_AP_CSI_MCLK	= IOMUX_PIN(0, 2,  2, 17, 1, 21),
-	MXC91231_PIN_AP_CSI_VSYNC	= IOMUX_PIN(0, 2,  3, 17, 2, 21),
-	MXC91231_PIN_AP_CSI_HSYNC	= IOMUX_PIN(0, 2,  4, 17, 3, 21),
-	MXC91231_PIN_AP_CSI_PIXCLK	= IOMUX_PIN(0, 2,  5, 18, 0, 21),
-	MXC91231_PIN_AP_I2CLK		= IOMUX_PIN(0, 2,  6, 18, 1, 12),
-	MXC91231_PIN_AP_I2DAT		= IOMUX_PIN(0, 2,  7, 18, 2, 12),
-	MXC91231_PIN_AP_GPIO_AP_C8	= IOMUX_PIN(0, 2,  8, 18, 3,  9),
-	MXC91231_PIN_AP_GPIO_AP_C9	= IOMUX_PIN(0, 2,  9, 19, 0,  9),
-	MXC91231_PIN_AP_GPIO_AP_C10	= IOMUX_PIN(0, 2, 10, 19, 1,  9),
-	MXC91231_PIN_AP_GPIO_AP_C11	= IOMUX_PIN(0, 2, 11, 19, 2,  9),
-	MXC91231_PIN_AP_GPIO_AP_C12	= IOMUX_PIN(0, 2, 12, 19, 3,  9),
-	MXC91231_PIN_AP_GPIO_AP_C13	= IOMUX_PIN(0, 2, 13, 20, 0, 28),
-	MXC91231_PIN_AP_GPIO_AP_C14	= IOMUX_PIN(0, 2, 14, 20, 1, 28),
-	MXC91231_PIN_AP_GPIO_AP_C15	= IOMUX_PIN(0, 2, 15, 20, 2,  9),
-	MXC91231_PIN_AP_GPIO_AP_C16	= IOMUX_PIN(0, 2, 16, 20, 3,  9),
-	MXC91231_PIN_AP_GPIO_AP_C17	= IOMUX_PIN(0, 2, 17, 21, 0,  9),
-	MXC91231_PIN_AP_ED_INT0		= IOMUX_PIN(0, 2, 18, 21, 1, 22),
-	MXC91231_PIN_AP_ED_INT1		= IOMUX_PIN(0, 2, 19, 21, 2, 22),
-	MXC91231_PIN_AP_ED_INT2		= IOMUX_PIN(0, 2, 20, 21, 3, 22),
-	MXC91231_PIN_AP_ED_INT3		= IOMUX_PIN(0, 2, 21, 22, 0, 22),
-	MXC91231_PIN_AP_ED_INT4		= IOMUX_PIN(0, 2, 22, 22, 1, 23),
-	MXC91231_PIN_AP_ED_INT5		= IOMUX_PIN(0, 2, 23, 22, 2, 23),
-	MXC91231_PIN_AP_ED_INT6		= IOMUX_PIN(0, 2, 24, 22, 3, 23),
-	MXC91231_PIN_AP_ED_INT7		= IOMUX_PIN(0, 2, 25, 23, 0, 23),
-	MXC91231_PIN_AP_U2_DSR_B	= IOMUX_PIN(0, 2, 26, 23, 1, 28),
-	MXC91231_PIN_AP_U2_RI_B		= IOMUX_PIN(0, 2, 27, 23, 2, 28),
-	MXC91231_PIN_AP_U2_CTS_B	= IOMUX_PIN(0, 2, 28, 23, 3, 28),
-	MXC91231_PIN_AP_U2_DTR_B	= IOMUX_PIN(0, 2, 29, 24, 0, 28),
-	MXC91231_PIN_AP_KPROW0		= IOMUX_PIN(0, 7,  0, 24, 1, 10),
-	MXC91231_PIN_AP_KPROW1		= IOMUX_PIN(0, 1, 15, 24, 2, 10),
-	MXC91231_PIN_AP_KPROW2		= IOMUX_PIN(0, 7,  0, 24, 3, 10),
-	MXC91231_PIN_AP_KPROW3		= IOMUX_PIN(0, 7,  0, 25, 0, 10),
-	MXC91231_PIN_AP_KPCOL0		= IOMUX_PIN(0, 7,  0, 25, 1, 11),
-	MXC91231_PIN_AP_KPCOL1		= IOMUX_PIN(0, 7,  0, 25, 2, 11),
-	MXC91231_PIN_AP_KPCOL2		= IOMUX_PIN(0, 7,  0, 25, 3, 11),
-
-	/* Shared pins */
-	MXC91231_PIN_SP_U3_TXD		= IOMUX_PIN(1, 3,  0,  0, 0, 28),
-	MXC91231_PIN_SP_U3_RXD		= IOMUX_PIN(1, 3,  1,  0, 1, 28),
-	MXC91231_PIN_SP_U3_RTS_B	= IOMUX_PIN(1, 3,  2,  0, 2, 28),
-	MXC91231_PIN_SP_U3_CTS_B	= IOMUX_PIN(1, 3,  3,  0, 3, 28),
-	MXC91231_PIN_SP_USB_TXOE_B	= IOMUX_PIN(1, 3,  4,  1, 0, 28),
-	MXC91231_PIN_SP_USB_DAT_VP	= IOMUX_PIN(1, 3,  5,  1, 1, 28),
-	MXC91231_PIN_SP_USB_SE0_VM	= IOMUX_PIN(1, 3,  6,  1, 2, 28),
-	MXC91231_PIN_SP_USB_RXD		= IOMUX_PIN(1, 3,  7,  1, 3, 28),
-	MXC91231_PIN_SP_UH2_TXOE_B	= IOMUX_PIN(1, 3,  8,  2, 0, 28),
-	MXC91231_PIN_SP_UH2_SPEED	= IOMUX_PIN(1, 3,  9,  2, 1, 28),
-	MXC91231_PIN_SP_UH2_SUSPEN	= IOMUX_PIN(1, 3, 10,  2, 2, 28),
-	MXC91231_PIN_SP_UH2_TXDP	= IOMUX_PIN(1, 3, 11,  2, 3, 28),
-	MXC91231_PIN_SP_UH2_RXDP	= IOMUX_PIN(1, 3, 12,  3, 0, 28),
-	MXC91231_PIN_SP_UH2_RXDM	= IOMUX_PIN(1, 3, 13,  3, 1, 28),
-	MXC91231_PIN_SP_UH2_OVR		= IOMUX_PIN(1, 3, 14,  3, 2, 28),
-	MXC91231_PIN_SP_UH2_PWR		= IOMUX_PIN(1, 3, 15,  3, 3, 28),
-	MXC91231_PIN_SP_SD1_DAT0	= IOMUX_PIN(1, 3, 16,  4, 0, 25),
-	MXC91231_PIN_SP_SD1_DAT1	= IOMUX_PIN(1, 3, 17,  4, 1, 25),
-	MXC91231_PIN_SP_SD1_DAT2	= IOMUX_PIN(1, 3, 18,  4, 2, 25),
-	MXC91231_PIN_SP_SD1_DAT3	= IOMUX_PIN(1, 3, 19,  4, 3, 25),
-	MXC91231_PIN_SP_SD1_CMD		= IOMUX_PIN(1, 3, 20,  5, 0, 25),
-	MXC91231_PIN_SP_SD1_CLK		= IOMUX_PIN(1, 3, 21,  5, 1, 25),
-	MXC91231_PIN_SP_SD2_DAT0	= IOMUX_PIN(1, 3, 22,  5, 2, 26),
-	MXC91231_PIN_SP_SD2_DAT1	= IOMUX_PIN(1, 3, 23,  5, 3, 26),
-	MXC91231_PIN_SP_SD2_DAT2	= IOMUX_PIN(1, 3, 24,  6, 0, 26),
-	MXC91231_PIN_SP_SD2_DAT3	= IOMUX_PIN(1, 3, 25,  6, 1, 26),
-	MXC91231_PIN_SP_GPIO_SP_A26	= IOMUX_PIN(1, 3, 26,  6, 2, 28),
-	MXC91231_PIN_SP_SPI1_CLK	= IOMUX_PIN(1, 3, 27,  6, 3, 13),
-	MXC91231_PIN_SP_SPI1_MOSI	= IOMUX_PIN(1, 3, 28,  7, 0, 13),
-	MXC91231_PIN_SP_SPI1_MISO	= IOMUX_PIN(1, 3, 29,  7, 1, 13),
-	MXC91231_PIN_SP_SPI1_SS0	= IOMUX_PIN(1, 3, 30,  7, 2, 13),
-	MXC91231_PIN_SP_SPI1_SS1	= IOMUX_PIN(1, 3, 31,  7, 3, 13),
-	MXC91231_PIN_SP_SD2_CMD		= IOMUX_PIN(1, 7,  0,  8, 0, 26),
-	MXC91231_PIN_SP_SD2_CLK		= IOMUX_PIN(1, 7,  0,  8, 1, 26),
-	MXC91231_PIN_SP_SIM1_RST_B	= IOMUX_PIN(1, 2, 30,  8, 2, 28),
-	MXC91231_PIN_SP_SIM1_SVEN	= IOMUX_PIN(1, 7,  0,  8, 3, 28),
-	MXC91231_PIN_SP_SIM1_CLK	= IOMUX_PIN(1, 7,  0,  9, 0, 28),
-	MXC91231_PIN_SP_SIM1_TRXD	= IOMUX_PIN(1, 7,  0,  9, 1, 28),
-	MXC91231_PIN_SP_SIM1_PD		= IOMUX_PIN(1, 2, 31,  9, 2, 28),
-	MXC91231_PIN_SP_UH2_TXDM	= IOMUX_PIN(1, 7,  0,  9, 3, 28),
-	MXC91231_PIN_SP_UH2_RXD		= IOMUX_PIN(1, 7,  0, 10, 0, 28),
-};
-
-#define PIN_AP_MAX	(104)
-#define PIN_SP_MAX	(41)
-
-#define PIN_MAX		(PIN_AP_MAX + PIN_SP_MAX)
-
-/*
- * Convenience values for use with mxc_iomux_mode()
- *
- * Format here is MXC91231_PIN_(pin name)__(function)
- */
-
-#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
-	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
-#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
-	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
-#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
-	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
-#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
-	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
-
-
-#endif /* __MACH_IOMUX_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index a3d930d3e65d..35c89bcdf758 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -35,8 +35,6 @@
 #define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_SOC_IMX51
 #define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MXC91231
-#define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MX3
 #define MXC_GPIO_IRQS		(32 * 3)
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 5d51cbb98893..11be5cdbdd1a 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -19,7 +19,6 @@
 #define MX50_PHYS_OFFSET	UL(0x70000000)
 #define MX51_PHYS_OFFSET	UL(0x90000000)
 #define MX53_PHYS_OFFSET	UL(0x70000000)
-#define MXC91231_PHYS_OFFSET	UL(0x90000000)
 
 #if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
 # if defined CONFIG_ARCH_MX1
@@ -32,8 +31,6 @@
 #  define PLAT_PHYS_OFFSET		MX27_PHYS_OFFSET
 # elif defined CONFIG_ARCH_MX3
 #  define PLAT_PHYS_OFFSET		MX3x_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MXC91231
-#  define PLAT_PHYS_OFFSET		MXC91231_PHYS_OFFSET
 # elif defined CONFIG_ARCH_MX50
 #  define PLAT_PHYS_OFFSET		MX50_PHYS_OFFSET
 # elif defined CONFIG_ARCH_MX51
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 1aea818d9d31..0aba8b18bc4f 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -35,7 +35,6 @@
 #define MXC_CPU_MX50		50
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
-#define MXC_CPU_MXC91231	91231
 
 #define IMX_CHIP_REVISION_1_0		0x10
 #define IMX_CHIP_REVISION_1_1		0x11
@@ -177,18 +176,6 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx53()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MXC91231
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MXC91231
-# endif
-# define cpu_is_mxc91231()	(mxc_cpu_type == MXC_CPU_MXC91231)
-#else
-# define cpu_is_mxc91231()	(0)
-#endif
-
 #ifndef __ASSEMBLY__
 
 struct cpu_op {
@@ -214,7 +201,7 @@ extern struct cpu_op *(*get_cpu_op)(int *op);
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
 #endif
 
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
+#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
 #define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
 
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
deleted file mode 100644
index 765190fe6332..000000000000
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- *  Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - Platform specific register memory map
- *
- *  Copyright 2005-2007 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_MXC91231_H__
-#define __MACH_MXC91231_H__
-
-/*
- * L2CC
- */
-#define MXC91231_L2CC_BASE_ADDR		0x30000000
-#define MXC91231_L2CC_SIZE		SZ_64K
-
-/*
- * AIPS 1
- */
-#define MXC91231_AIPS1_BASE_ADDR	0x43F00000
-#define MXC91231_AIPS1_SIZE		SZ_1M
-
-#define MXC91231_AIPS1_CTRL_BASE_ADDR	MXC91231_AIPS1_BASE_ADDR
-#define MXC91231_MAX_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x04000)
-#define MXC91231_EVTMON_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x08000)
-#define MXC91231_CLKCTL_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x0C000)
-#define MXC91231_ETB_SLOT4_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x10000)
-#define MXC91231_ETB_SLOT5_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x14000)
-#define MXC91231_ECT_CTIO_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x18000)
-#define MXC91231_I2C_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x80000)
-#define MXC91231_MU_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x88000)
-#define MXC91231_UART1_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x90000)
-#define MXC91231_UART2_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x94000)
-#define MXC91231_DSM_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x98000)
-#define MXC91231_OWIRE_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x9C000)
-#define MXC91231_SSI1_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA0000)
-#define MXC91231_KPP_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA8000)
-#define MXC91231_IOMUX_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xAC000)
-#define MXC91231_CTI_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xB8000)
-
-/*
- * AIPS 2
- */
-#define MXC91231_AIPS2_BASE_ADDR	0x53F00000
-#define MXC91231_AIPS2_SIZE		SZ_1M
-
-#define MXC91231_GEMK_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x8C000)
-#define MXC91231_GPT1_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x90000)
-#define MXC91231_EPIT1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0x94000)
-#define MXC91231_SCC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xAC000)
-#define MXC91231_RNGA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xB0000)
-#define MXC91231_IPU_CTRL_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC0000)
-#define MXC91231_AUDMUX_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC4000)
-#define MXC91231_EDIO_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xC8000)
-#define MXC91231_GPIO1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xCC000)
-#define MXC91231_GPIO2_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xD0000)
-#define MXC91231_SDMA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD4000)
-#define MXC91231_RTC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD8000)
-#define MXC91231_WDOG1_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xDC000)
-#define MXC91231_PWM_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xE0000)
-#define MXC91231_GPIO3_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE4000)
-#define MXC91231_WDOG2_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE8000)
-#define MXC91231_RTIC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xEC000)
-#define MXC91231_LPMC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xF0000)
-
-/*
- * SPBA global module 0
- */
-#define MXC91231_SPBA0_BASE_ADDR	0x50000000
-#define MXC91231_SPBA0_SIZE		SZ_1M
-
-#define MXC91231_MMC_SDHC1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x04000)
-#define MXC91231_MMC_SDHC2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x08000)
-#define MXC91231_UART3_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x0C000)
-#define MXC91231_CSPI2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x10000)
-#define MXC91231_SSI2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x14000)
-#define MXC91231_SIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x18000)
-#define MXC91231_IIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x1C000)
-#define MXC91231_CTI_SDMA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x20000)
-#define MXC91231_USBOTG_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x24000)
-#define MXC91231_USBOTG_DATA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x28000)
-#define MXC91231_CSPI1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x30000)
-#define MXC91231_SPBA_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x3C000)
-#define MXC91231_IOMUX_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x40000)
-#define MXC91231_CRM_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x44000)
-#define MXC91231_CRM_AP_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x48000)
-#define MXC91231_PLL0_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x4C000)
-#define MXC91231_PLL1_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x50000)
-#define MXC91231_PLL2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x54000)
-#define MXC91231_GPIO4_SH_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x58000)
-#define MXC91231_HAC_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
-#define MXC91231_SAHARA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
-#define MXC91231_PLL3_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x60000)
-
-/*
- * SPBA global module 1
- */
-#define MXC91231_SPBA1_BASE_ADDR	0x52000000
-#define MXC91231_SPBA1_SIZE		SZ_1M
-
-#define MXC91231_MQSPI_BASE_ADDR	(MXC91231_SPBA1_BASE_ADDR + 0x34000)
-#define MXC91231_EL1T_BASE_ADDR		(MXC91231_SPBA1_BASE_ADDR + 0x38000)
-
-/*!
- * Defines for SPBA modules
- */
-#define MXC91231_SPBA_SDHC1		0x04
-#define MXC91231_SPBA_SDHC2		0x08
-#define MXC91231_SPBA_UART3		0x0C
-#define MXC91231_SPBA_CSPI2		0x10
-#define MXC91231_SPBA_SSI2		0x14
-#define MXC91231_SPBA_SIM		0x18
-#define MXC91231_SPBA_IIM		0x1C
-#define MXC91231_SPBA_CTI_SDMA		0x20
-#define MXC91231_SPBA_USBOTG_CTRL_REGS	0x24
-#define MXC91231_SPBA_USBOTG_DATA_REGS	0x28
-#define MXC91231_SPBA_CSPI1		0x30
-#define MXC91231_SPBA_MQSPI		0x34
-#define MXC91231_SPBA_EL1T		0x38
-#define MXC91231_SPBA_IOMUX		0x40
-#define MXC91231_SPBA_CRM_COM		0x44
-#define MXC91231_SPBA_CRM_AP		0x48
-#define MXC91231_SPBA_PLL0		0x4C
-#define MXC91231_SPBA_PLL1		0x50
-#define MXC91231_SPBA_PLL2		0x54
-#define MXC91231_SPBA_GPIO4		0x58
-#define MXC91231_SPBA_SAHARA		0x5C
-
-/*
- * ROMP and AVIC
- */
-#define MXC91231_ROMP_BASE_ADDR		0x60000000
-#define MXC91231_ROMP_SIZE		SZ_64K
-
-#define MXC91231_AVIC_BASE_ADDR		0x68000000
-#define MXC91231_AVIC_SIZE		SZ_64K
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define MXC91231_X_MEMC_BASE_ADDR	0xB8000000
-#define MXC91231_X_MEMC_SIZE		SZ_64K
-
-#define MXC91231_NFC_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x0000)
-#define MXC91231_ESDCTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x1000)
-#define MXC91231_WEIM_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x2000)
-#define MXC91231_M3IF_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x3000)
-#define MXC91231_EMI_CTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x4000)
-
-/*
- * Memory regions and CS
- * CPLD is connected on CS4
- * CS5 is TP1021 or it is not connected
- * */
-#define MXC91231_FB_RAM_BASE_ADDR	0x78000000
-#define MXC91231_FB_RAM_SIZE		SZ_256K
-#define MXC91231_CSD0_BASE_ADDR		0x80000000
-#define MXC91231_CSD1_BASE_ADDR		0x90000000
-#define MXC91231_CS0_BASE_ADDR		0xA0000000
-#define MXC91231_CS1_BASE_ADDR		0xA8000000
-#define MXC91231_CS2_BASE_ADDR		0xB0000000
-#define MXC91231_CS3_BASE_ADDR		0xB2000000
-#define MXC91231_CS4_BASE_ADDR		0xB4000000
-#define MXC91231_CS5_BASE_ADDR		0xB6000000
-
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address.
- */
-#define MXC91231_IO_P2V(x)		IMX_IO_P2V(x)
-#define MXC91231_IO_ADDRESS(x)		IOMEM(MXC91231_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#define MXC91231_INT_GPIO3		0
-#define MXC91231_INT_EL1T_CI		1
-#define MXC91231_INT_EL1T_RFCI		2
-#define MXC91231_INT_EL1T_RFI		3
-#define MXC91231_INT_EL1T_MCU		4
-#define MXC91231_INT_EL1T_IPI		5
-#define MXC91231_INT_MU_GEN		6
-#define MXC91231_INT_GPIO4		7
-#define MXC91231_INT_MMC_SDHC2		8
-#define MXC91231_INT_MMC_SDHC1		9
-#define MXC91231_INT_I2C		10
-#define MXC91231_INT_SSI2		11
-#define MXC91231_INT_SSI1		12
-#define MXC91231_INT_CSPI2		13
-#define MXC91231_INT_CSPI1		14
-#define MXC91231_INT_RTIC		15
-#define MXC91231_INT_SAHARA		15
-#define MXC91231_INT_HAC		15
-#define MXC91231_INT_UART3_RX		16
-#define MXC91231_INT_UART3_TX		17
-#define MXC91231_INT_UART3_MINT		18
-#define MXC91231_INT_ECT		19
-#define MXC91231_INT_SIM_IPB		20
-#define MXC91231_INT_SIM_DATA		21
-#define MXC91231_INT_RNGA		22
-#define MXC91231_INT_DSM_AP		23
-#define MXC91231_INT_KPP		24
-#define MXC91231_INT_RTC		25
-#define MXC91231_INT_PWM		26
-#define MXC91231_INT_GEMK_AP		27
-#define MXC91231_INT_EPIT		28
-#define MXC91231_INT_GPT		29
-#define MXC91231_INT_UART2_RX		30
-#define MXC91231_INT_UART2_TX		31
-#define MXC91231_INT_UART2_MINT		32
-#define MXC91231_INT_NANDFC		33
-#define MXC91231_INT_SDMA		34
-#define MXC91231_INT_USB_WAKEUP		35
-#define MXC91231_INT_USB_SOF		36
-#define MXC91231_INT_PMU_EVTMON		37
-#define MXC91231_INT_USB_FUNC		38
-#define MXC91231_INT_USB_DMA		39
-#define MXC91231_INT_USB_CTRL		40
-#define MXC91231_INT_IPU_ERR		41
-#define MXC91231_INT_IPU_SYN		42
-#define MXC91231_INT_UART1_RX		43
-#define MXC91231_INT_UART1_TX		44
-#define MXC91231_INT_UART1_MINT		45
-#define MXC91231_INT_IIM		46
-#define MXC91231_INT_MU_RX_OR		47
-#define MXC91231_INT_MU_TX_OR		48
-#define MXC91231_INT_SCC_SCM		49
-#define MXC91231_INT_SCC_SMN		50
-#define MXC91231_INT_GPIO2		51
-#define MXC91231_INT_GPIO1		52
-#define MXC91231_INT_MQSPI1		53
-#define MXC91231_INT_MQSPI2		54
-#define MXC91231_INT_WDOG2		55
-#define MXC91231_INT_EXT_INT7		56
-#define MXC91231_INT_EXT_INT6		57
-#define MXC91231_INT_EXT_INT5		58
-#define MXC91231_INT_EXT_INT4		59
-#define MXC91231_INT_EXT_INT3		60
-#define MXC91231_INT_EXT_INT2		61
-#define MXC91231_INT_EXT_INT1		62
-#define MXC91231_INT_EXT_INT0		63
-
-#define MXC91231_MAX_INT_LINES		63
-#define MXC91231_MAX_EXT_LINES		8
-
-#endif /* __MACH_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 0417da9f710d..51f02a9d41a3 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -24,12 +24,6 @@ extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
 
 static inline void arch_idle(void)
 {
-#ifdef CONFIG_ARCH_MXC91231
-	if (cpu_is_mxc91231()) {
-		/* Need this to set DSM low-power mode */
-		mxc91231_prepare_idle();
-	}
-#endif
 	/* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
 	if (cpu_is_mx31() || cpu_is_mx35()) {
 		unsigned long reg = 0;
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 2d9624697cc9..d61d5c74817c 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -26,8 +26,6 @@
 #define CLOCK_TICK_RATE		16000000
 #elif defined CONFIG_ARCH_MX5
 #define CLOCK_TICK_RATE		8000000
-#elif defined CONFIG_ARCH_MXC91231
-#define CLOCK_TICK_RATE		13000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 3455fc0575a6..8024f2ac177c 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -37,12 +37,6 @@ void arch_reset(char mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
-#ifdef CONFIG_ARCH_MXC91231
-	if (cpu_is_mxc91231()) {
-		mxc91231_arch_reset(mode, cmd);
-		return;
-	}
-#endif
 #ifdef CONFIG_MACH_MX51_EFIKAMX
 	if (machine_is_mx51_efikamx()) {
 		mx51_efikamx_reset();
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 2237ff8b434f..40f32e7950ae 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -54,7 +54,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35, MX25, MXC91231, MX5 */
+/* MX31, MX35, MX25, MX5 */
 #define V2_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
 #define V2_TCTL_CLK_IPG		(1 << 6)
 #define V2_TCTL_FRR		(1 << 9)
-- 
cgit v1.2.3


From 7ccab6563a70b3b4b0cd57d2387410877196bfd2 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Fri, 18 Mar 2011 22:07:59 +0100
Subject: ARM: mxc: update defconfigs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

- enable new machines:
  - IMX27IPCAM (mx27)
  - VPR200 (mx3)
  - EUKREA_CPUIMX51SD (mx51)
  - MX51_EFIKAMX (mx51)
  - MX51_EFIKASB (mx51)
- disable SYSFS_DEPRECATED_V2 (mx1, mx21, mx3)
- enable CPU_IDLE (mx27)
- enable MXC_PWM (mx1, mx51)
- drop PM=y, defaults to y since
	1eb208a (PM: Make CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME))
  (mx1, mx27, mx3, mx51)
- enable CAN_MCP251X (mx27, mx51) and CAN_SJA1000 (mx27)
- enable MTD_NAND_MXC and UBI (mx51)
- add MISC_DEVICES=y, defaults to n since
	5f2365d (misc devices: do not enable by default)
  (EEPROM_AT24 depends on MISC_DEVICES) (mx27, mx3)
  or drop MISC_DEVICES=n (mx1, mx51)
- enable EEPROM_AT25 (mx27)
- drop INOTIFY; is gone since
	2dfc1ca (inotify: remove inotify in kernel interface)
  (mx1)
- drop VGA_CONSOLE; isn't selectable on imx any more since
	fb78b51 (ARM: Disable VGA console for ARM in most cases)
  (mx21)
- drop FEC=y, defaults to y since
	085e79e (net/fec: consolidate all i.MX options to CONFIG_ARM)
  (mx27, mx3, mx51)
- drop CRYPTO_ANSI_CPRNG=n; depends on CRYPTO which is unset (mx1)
- drop VIDEO_ALLOW_V4L1=n; gone since
	58c66df ([media] Remove VIDEO_V4L1 Kconfig option)
  (mx3)
- enable mc13xxx including regulator, rtc, touch and led (mx27, mx3, mx51)
- enable KEYBOARD_GPIO (mx27, mx3) and KEYBOARD_IMX (mx27, mx3, mx51)
- drop SERIO=n as KEYBOARD_ATKBD (default y since INPUT=y) selects SERIO
  (mx27, mx3)
- enable I2C_IMX and SPI_IMX (mx51)
- enable SND_IMX_SOC including platfrom glue (mx27, mx3, mx51)
- enable SOC_CAMERA_MT9{T031,V022} (mx27)
- enable VIDEO_MX2 (mx27)
- enable LEDS_GPIO and LEDS_PWM (mx27, mx3, mx51)
- enable USB_EHCI_MXC (mx27)
- enable IMX_DMA (mx1, mx21, mx27)
- enable IMX_SDMA (mx3, mx51)
- RCU_CPU_STALL_DETECTOR isn't selectable any more since
	687d7a9 (rcu: restrict TREE_RCU to SMP builds with !PREEMPT)
  (mx51)
- MMC_MXC isn't selectable any more since
	170cba8 (mmc: mmc_mxc: Allow selection only for the correct platforms)
  (mx1)
- drop MTD_CONCAT; gone since
	f53fdeb (mtd: drop MTD_CONCAT from Kconfig entirely)
  (mx51)
- drop AUTOFS_FS=y; is in staging since
	db7bee2 (autofs3: move to drivers/staging)
  (mx51)
- change CRYPTO_DEFLATE and CRYPTO_LZO to =m as they depend on
  CRYPTO since
	cce9e06 ([CRYPTO] api: Split out low-level API)
  and CRYPTO is only =m. (mx51)
- enable MMC_SDHCI_ESDHC_IMX (mx3, mx51)

LAKML-Reference: 1302596357-24108-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/mx1_defconfig  | 11 +++------
 arch/arm/configs/mx21_defconfig |  8 +++---
 arch/arm/configs/mx27_defconfig | 45 ++++++++++++++++++++++++++++-----
 arch/arm/configs/mx3_defconfig  | 43 +++++++++++++++++++++++---------
 arch/arm/configs/mx51_defconfig | 55 +++++++++++++++++++++++++++++++++--------
 5 files changed, 124 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index b39b5ced8a10..ff96e8f7f5ea 100644
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -16,6 +15,7 @@ CONFIG_ARCH_MX1=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
@@ -23,7 +23,6 @@ CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -47,7 +46,6 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
 CONFIG_NETDEVICES=y
 CONFIG_PHYLIB=y
 CONFIG_SMSC_PHY=y
@@ -58,9 +56,9 @@ CONFIG_DM9000=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -74,9 +72,9 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_IMX=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_DMA=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
@@ -87,4 +85,3 @@ CONFIG_ROOT_NFS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
index 411f88dd4402..27261f655f59 100644
--- a/arch/arm/configs/mx21_defconfig
+++ b/arch/arm/configs/mx21_defconfig
@@ -2,7 +2,6 @@ CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -51,8 +50,8 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_NET_ETHERNET=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -62,12 +61,12 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_SERIO is not set
 # CONFIG_CONSOLE_TRANSLATIONS is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -76,7 +75,6 @@ CONFIG_SPI=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_IMX=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
@@ -85,6 +83,8 @@ CONFIG_LOGO=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_DMA=y
 # CONFIG_DNOTIFY is not set
 CONFIG_MSDOS_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index 9ad4c656c9bd..220e84ffef52 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -29,6 +29,7 @@ CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_IMX27LITE=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_MXT_TD60=y
+CONFIG_MACH_IMX27IPCAM=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
@@ -37,9 +38,9 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -54,6 +55,11 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_MCP251X=y
+CONFIG_CAN_SJA1000=y
+CONFIG_CAN_SJA1000_PLATFORM=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
@@ -71,23 +77,24 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
-CONFIG_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_SERIO is not set
+CONFIG_TOUCHSCREEN_MC13783=y
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -98,19 +105,45 @@ CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9T031=y
+CONFIG_SOC_CAMERA_MT9V022=y
+CONFIG_VIDEO_MX2=y
 CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_MX27VIS_AIC32X4=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=m
 # CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_MC13783=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_MC13XXX=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_DMA=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 7c4b30b34952..0436f8a1fe62 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -13,18 +12,19 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_PCM037=y
 CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_MX31_3DS=y
 CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_QONG=y
-CONFIG_MACH_PCM043=y
 CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX35=y
+CONFIG_MACH_VPR200=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
@@ -35,7 +35,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 CONFIG_VFP=y
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -62,24 +61,26 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 # CONFIG_BLK_DEV is not set
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
 CONFIG_DNET=y
-CONFIG_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_MC13783=y
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -90,11 +91,12 @@ CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
 CONFIG_MFD_WM8350_I2C=y
+CONFIG_MFD_MC13XXX=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_WM8350=y
+CONFIG_REGULATOR_MC13783=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_MT9M001=y
 CONFIG_SOC_CAMERA_MT9M111=y
@@ -105,10 +107,29 @@ CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_MX3=y
 # CONFIG_RADIO_ADAPTERS is not set
 CONFIG_FB=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_WM1133_EV1=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_MC13783=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index e3c903281f70..51ed2792857a 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -17,6 +17,10 @@ CONFIG_ARCH_MX5=y
 CONFIG_MACH_MX51_BABBAGE=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
+CONFIG_MACH_EUKREA_CPUIMX51SD=y
+CONFIG_MACH_MX51_EFIKAMX=y
+CONFIG_MACH_MX51_EFIKASB=y
+CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -27,7 +31,6 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_TEST_SUSPEND=y
 CONFIG_NET=y
@@ -41,13 +44,25 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_MCP251X=y
 # CONFIG_WIRELESS is not set
 # CONFIG_STANDALONE is not set
 CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_MISC_DEVICES is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -58,6 +73,7 @@ CONFIG_SCSI_SCAN_ASYNC=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=m
 CONFIG_NETDEVICES=y
+CONFIG_MII=m
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_QSEMI_PHY=y
@@ -74,24 +90,25 @@ CONFIG_LSI_ET1011C_PHY=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_MC13783=y
 CONFIG_SERIO_SERPORT=m
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
@@ -100,8 +117,21 @@ CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_REGULATOR_MC13892=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
@@ -109,10 +139,17 @@ CONFIG_USB_EHCI_MXC=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_MC13783=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_MC13XXX=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -126,7 +163,6 @@ CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_ISO9660_FS=m
@@ -153,14 +189,13 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=m
-- 
cgit v1.2.3


From 8c0b9dffa0d3a9bcab4eb160be5f363b9cfe1d15 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Tue, 22 Mar 2011 11:54:35 +0100
Subject: ARM: mxc: don't use the symbols in the CPU family choice to select
 others
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The symbols in this choice should only be used to select between the
available machines that can be built into a single kernel. As these sets
(will) differ e.g. depending on ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR
letting them select other symbols makes the logic more complex and needs
to duplicate some things. So let the machines select the corresponding
symbols (indirectly via SOC_XYZ).

LAKML-Reference: 1302464943-20721-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/Kconfig | 3 +++
 arch/arm/mach-mx5/Kconfig | 6 ++++++
 arch/arm/plat-mxc/Kconfig | 4 ----
 3 files changed, 9 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 13e6f819d52a..791428326997 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -43,6 +43,7 @@ config SOC_IMX27
 
 config SOC_IMX31
 	bool
+	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_MX31
@@ -50,6 +51,7 @@ config SOC_IMX31
 
 config SOC_IMX35
 	bool
+	select CPU_V6
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
@@ -66,6 +68,7 @@ config MACH_MXLADS
 config ARCH_MX1ADS
 	bool "MX1ADS platform"
 	select MACH_MXLADS
+	select SOC_IMX1
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 49b5661f01c2..b3570e6c8e12 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -13,6 +13,8 @@ config ARCH_MX53
 
 config SOC_IMX50
 	bool
+	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
@@ -21,6 +23,8 @@ config SOC_IMX50
 
 config	SOC_IMX51
 	bool
+	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
@@ -29,6 +33,8 @@ config	SOC_IMX51
 
 config	SOC_IMX53
 	bool
+	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MX53
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 97f12a422cb1..b9cf1c507e8a 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -10,7 +10,6 @@ choice
 
 config ARCH_MX1
 	bool "MX1-based"
-	select SOC_IMX1
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
@@ -26,14 +25,11 @@ config ARCH_MX25
 
 config ARCH_MX3
 	bool "MX3-based"
-	select CPU_V6
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
 config ARCH_MX5
 	bool "MX5-based"
-	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
 	help
 	  This enables support for systems based on the Freescale i.MX51 family
 
-- 
cgit v1.2.3


From 7531748a3fcd2b491ac9dbb5cbd79b3783cc35e6 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Fri, 1 Apr 2011 23:08:03 +0200
Subject: ARM: mxc: simplify platform selection for i.MX21 and i.MX27
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This moves the choice between i.MX21 and i.MX27 (that appeared when
choosing "MX2-based" in the mxc-global CPU family choice) to the global
choice.

Now this global choice isn't about "CPU families" anymore but this isn't
currently possible anyhow (e.g. because i.MX25 doesn't match many
expectations that are called MX2 and we cannot compile i.MX51 and i.MX53
into a single (runnable) kernel) and will change further in the future.

Note that reduced .config files for i.MX21 need some care not to switch
so a i.MX31/35 config which is the default in the global choice.
mx21_defconfig is adapted accordingly.

LAKML-Reference: 1302464943-20721-3-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/mx21_defconfig |  2 +-
 arch/arm/configs/mx27_defconfig |  1 -
 arch/arm/mach-imx/Kconfig       | 30 ++++++++----------------------
 arch/arm/plat-mxc/Kconfig       | 26 +++++++++++++++++---------
 4 files changed, 26 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
index 27261f655f59..4590a1243f30 100644
--- a/arch/arm/configs/mx21_defconfig
+++ b/arch/arm/configs/mx21_defconfig
@@ -12,7 +12,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
+CONFIG_MACH_MX21=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index 220e84ffef52..11f1283d12bc 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -17,7 +17,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
 CONFIG_MACH_MX27=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 791428326997..038230126e61 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,10 +1,14 @@
 config IMX_HAVE_DMA_V1
 	bool
 #
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# ARCH_MX2, ARCH_MX31 and ARCH_MX35 are left for compatibility
 # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
 # To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+# more sensible) names are used: SOC_IMX21, SOC_IMX27, SOC_IMX31 and SOC_IMX35
+config ARCH_MX2
+	# note that i.MX25 doesn't select this
+	bool
+
 config ARCH_MX31
 	bool
 
@@ -20,6 +24,7 @@ config SOC_IMX1
 
 config SOC_IMX21
 	bool
+	select ARCH_MX2
 	select CPU_ARM926T
 	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
@@ -35,6 +40,7 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
+	select ARCH_MX2
 	select CPU_ARM926T
 	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
@@ -82,26 +88,6 @@ config MACH_SCB9328
 
 endif
 
-if ARCH_MX2
-
-choice
-	prompt "CPUs:"
-	default MACH_MX21
-
-config MACH_MX21
-	bool "i.MX21 support"
-	help
-	  This enables support for Freescale's MX2 based i.MX21 processor.
-
-config MACH_MX27
-	bool "i.MX27 support"
-	help
-	  This enables support for Freescale's MX2 based i.MX27 processor.
-
-endchoice
-
-endif
-
 if MACH_MX21
 
 comment "MX21 platforms:"
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b9cf1c507e8a..ce6ed5eb129d 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -5,28 +5,36 @@ source "arch/arm/plat-mxc/devices/Kconfig"
 menu "Freescale MXC Implementations"
 
 choice
-	prompt "Freescale CPU family:"
+	prompt "Set of supported SoCs:"
 	default ARCH_MX3
 
+# don't use the symbols available in this choice in code. They should only be
+# used to select the machines that can be compiled into a single kernel.
 config ARCH_MX1
-	bool "MX1-based"
+	bool "MX1"
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
-config ARCH_MX2
-	bool "MX2-based"
+config MACH_MX21
+	bool "i.MX21"
 	help
-	  This enables support for systems based on the Freescale i.MX2 family
+	  This enables support for machines using Freescale's i.MX21 processor.
 
 config ARCH_MX25
-	bool "MX25-based"
+	bool "i.MX25"
 	help
-	  This enables support for systems based on the Freescale i.MX25 family
+	  This enables support for machines using Freescale's i.MX25 processor.
+
+config MACH_MX27
+	bool "i.MX27"
+	help
+	  This enables support for machines using Freescale's i.MX27 processor.
 
 config ARCH_MX3
-	bool "MX3-based"
+	bool "i.MX31 + i.MX35"
 	help
-	  This enables support for systems based on the Freescale i.MX3 family
+	  This enables support for machines using Freescale's i.MX31 and i.MX35
+	  processors.
 
 config ARCH_MX5
 	bool "MX5-based"
-- 
cgit v1.2.3


From 524d106124cf02497710cd4d23af3865efe4fff3 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Fri, 8 Apr 2011 11:06:43 +0200
Subject: ARM: mxc: don't allow to compile together i.MX51 and i.MX53
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The two SoCs have different PHYS_OFFSETs so it's not (yet) possible to
compile a single (working) kernel for these.

LAKML-Reference: 1302464943-20721-4-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/mx51_defconfig |  2 +-
 arch/arm/mach-mx5/Kconfig       | 51 ++++++++++++++++++++++++++---------------
 arch/arm/plat-mxc/Kconfig       | 19 +++++++++++++--
 3 files changed, 51 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index 51ed2792857a..e970c51aab30 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -13,7 +13,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
 CONFIG_MACH_MX51_BABBAGE=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index b3570e6c8e12..799fbc40e53c 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -1,11 +1,11 @@
-if ARCH_MX5
-# ARCH_MX50/51/53 are left to mark places where prevent multi-soc in single
+if ARCH_MX503 || ARCH_MX51
+# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
 # image. So for most time, SOC_IMX50/51/53 should be used.
 
-config ARCH_MX50
+config ARCH_MX5
 	bool
 
-config ARCH_MX51
+config ARCH_MX50
 	bool
 
 config ARCH_MX53
@@ -19,6 +19,7 @@ config SOC_IMX50
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
+	select ARCH_MX5
 	select ARCH_MX50
 
 config	SOC_IMX51
@@ -29,7 +30,7 @@ config	SOC_IMX51
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX51
+	select ARCH_MX5
 
 config	SOC_IMX53
 	bool
@@ -37,9 +38,29 @@ config	SOC_IMX53
 	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
+	select ARCH_MX5
 	select ARCH_MX53
 
-comment "MX5 platforms:"
+if ARCH_MX50_SUPPORTED
+#comment "i.MX50 machines:"
+
+config MACH_MX50_RDP
+	bool "Support MX50 reference design platform"
+	depends on BROKEN
+	select SOC_IMX50
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select IMX_HAVE_PLATFORM_FEC
+	help
+	  Include support for MX50 reference design platform (RDP) board. This
+	  includes specific configurations for the board and its peripherals.
+
+endif # ARCH_MX50_SUPPORTED
+
+if ARCH_MX51
+comment "i.MX51 machines:"
 
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
@@ -142,6 +163,11 @@ config MACH_MX51_EFIKASB
 	  Include support for Genesi Efika Smartbook. This includes specific
 	  configurations for the board and its peripherals.
 
+endif # ARCH_MX51
+
+if ARCH_MX53_SUPPORTED
+comment "i.MX53 machines:"
+
 config MACH_MX53_EVK
 	bool "Support MX53 EVK platforms"
 	select SOC_IMX53
@@ -177,17 +203,6 @@ config MACH_MX53_LOCO
 	  Include support for MX53 LOCO platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_MX50_RDP
-	bool "Support MX50 reference design platform"
-	depends on BROKEN
-	select SOC_IMX50
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select IMX_HAVE_PLATFORM_FEC
-	help
-	  Include support for MX50 reference design platform (RDP) board. This
-	  includes specific configurations for the board and its peripherals.
+endif # ARCH_MX53_SUPPORTED
 
 endif
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index ce6ed5eb129d..aa4234b58d8e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -4,6 +4,12 @@ source "arch/arm/plat-mxc/devices/Kconfig"
 
 menu "Freescale MXC Implementations"
 
+config ARCH_MX50_SUPPORTED
+	bool
+
+config ARCH_MX53_SUPPORTED
+	bool
+
 choice
 	prompt "Set of supported SoCs:"
 	default ARCH_MX3
@@ -36,8 +42,17 @@ config ARCH_MX3
 	  This enables support for machines using Freescale's i.MX31 and i.MX35
 	  processors.
 
-config ARCH_MX5
-	bool "MX5-based"
+config ARCH_MX503
+	bool "i.MX50 + i.MX53"
+	select ARCH_MX50_SUPPORTED
+	select ARCH_MX53_SUPPORTED
+	help
+	  This enables support for machines using Freescale's i.MX50 and i.MX51
+	  processors.
+
+config ARCH_MX51
+	bool "i.MX51"
+	select ARCH_MX51_SUPPORTED
 	help
 	  This enables support for systems based on the Freescale i.MX51 family
 
-- 
cgit v1.2.3


From 3f080028874dad108bf5d518ca560cf8b031b99b Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Sat, 2 Apr 2011 00:15:49 +0200
Subject: ARM: mx3: make ioremap quirk ready for multi-SoC kernels
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

To be able to compile e.g. i.MX31 and i.MX51 in a single kernel image
the ioremap quirk needs a runtime check.

While touching this code make the comment more understandable by adding
a sentence from the commit log that introduced it
(eadefef ([ARM] MX3: Use ioremap wrapper to map SoC devices nonshared)).

As mach/io.h now uses cpu_is_ some header reshuffling in mach/hardware.h
was necessary. (mach/mx27.h and mach/mx31.h #include <linux/io.h> which
#includes <mach/io.h>. So mach/mxc.h which provides the cpu_is_ macros
needs to be included before mach/mx27.h and mach/mx31.h.)

LAKML-Reference: 1302464943-20721-5-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/hardware.h |  4 ++--
 arch/arm/plat-mxc/include/mach/io.h       | 23 +++++++++++++++--------
 2 files changed, 17 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a881db5c395e..67d3e2bed065 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -95,6 +95,8 @@
 
 #define IMX_IO_ADDRESS(x)	IOMEM(IMX_IO_P2V(x))
 
+#include <mach/mxc.h>
+
 #ifdef CONFIG_ARCH_MX5
 #include <mach/mx50.h>
 #include <mach/mx51.h>
@@ -125,8 +127,6 @@
 # include <mach/mx25.h>
 #endif
 
-#include <mach/mxc.h>
-
 #define imx_map_entry(soc, name, _type)	{				\
 	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
 	.pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR),		\
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
index b4f2de769466..4347a87d2bb0 100644
--- a/arch/arm/plat-mxc/include/mach/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -14,19 +14,26 @@
 /* Allow IO space to be anywhere in the memory */
 #define IO_SPACE_LIMIT 0xffffffff
 
-#ifdef CONFIG_ARCH_MX3
-#define __arch_ioremap __mx3_ioremap
+#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
+#include <mach/hardware.h>
+
+#define __arch_ioremap __imx_ioremap
 #define __arch_iounmap __iounmap
 
+#define addr_in_module(addr, mod) \
+	((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
+
 static inline void __iomem *
-__mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+__imx_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 {
-	if (mtype == MT_DEVICE) {
-		/* Access all peripherals below 0x80000000 as nonshared device
-		 * but leave l2cc alone.
+	if (mtype == MT_DEVICE && (cpu_is_mx31() || cpu_is_mx35())) {
+		/*
+		 * Access all peripherals below 0x80000000 as nonshared device
+		 * on mx3, but leave l2cc alone.  Otherwise cache corruptions
+		 * can occur.
 		 */
-		if ((phys_addr < 0x80000000) && ((phys_addr < 0x30000000) ||
-			(phys_addr >= 0x30000000 + SZ_1M)))
+		if (phys_addr < 0x80000000 &&
+				!addr_in_module(phys_addr, MX3x_L2CC))
 			mtype = MT_DEVICE_NONSHARED;
 	}
 
-- 
cgit v1.2.3


From 3c6b267ceef8a13e20c3bd062c4cd19ce01c48c9 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Sat, 2 Apr 2011 00:16:21 +0200
Subject: ARM: imx: remove some deprecated and unused #defines
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

LAKML-Reference: 1302464943-20721-6-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mxc.h | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 0aba8b18bc4f..4ac53ce97c24 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -194,13 +194,6 @@ enum mxc_cpu_pwr_mode {
 extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
-/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
-#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
-#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
-#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
-#endif
-
 #define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
 #define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
 
-- 
cgit v1.2.3