From 25d83f9d23d8ff61ba7e2815a2ffc7c974003bdd Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Thu, 10 Feb 2022 22:22:14 +0300 Subject: ata: pata_hpt3x2n: disable fast interrupts in prereset() method The PIO/DMA mode setting function is hardly a good place for disabling the fast interrupts on a channel -- let's move that code to the driver's prereset() method instead. Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal --- drivers/ata/pata_hpt3x2n.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index b36090808890..1f6afd8ee29b 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.17" +#define DRV_VERSION "0.3.18" enum { PCI66 = (1 << 1), @@ -166,6 +166,7 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline) { 0x50, 1, 0x04, 0x04 }, { 0x54, 1, 0x04, 0x04 } }; + u8 mcr2; if (!pci_test_config_bits(pdev, &hpt3x2n_enable_bits[ap->port_no])) return -ENOENT; @@ -174,6 +175,11 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline) pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); + /* Fast interrupt prediction disable, hold off interrupt disable */ + pci_read_config_byte(pdev, 0x51 + 4 * ap->port_no, &mcr2); + mcr2 &= ~0x07; + pci_write_config_byte(pdev, 0x51 + 4 * ap->port_no, mcr2); + return ata_sff_prereset(link, deadline); } @@ -181,17 +187,8 @@ static void hpt3x2n_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u32 addr1, addr2; + int addr = 0x40 + 4 * (adev->devno + 2 * ap->port_no); u32 reg, timing, mask; - u8 fast; - - addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); - addr2 = 0x51 + 4 * ap->port_no; - - /* Fast interrupt prediction disable, hold off interrupt disable */ - pci_read_config_byte(pdev, addr2, &fast); - fast &= ~0x07; - pci_write_config_byte(pdev, addr2, fast); /* Determine timing mask and find matching mode entry */ if (mode < XFER_MW_DMA_0) @@ -203,9 +200,9 @@ static void hpt3x2n_set_mode(struct ata_port *ap, struct ata_device *adev, timing = hpt3x2n_find_mode(ap, mode); - pci_read_config_dword(pdev, addr1, ®); + pci_read_config_dword(pdev, addr, ®); reg = (reg & ~mask) | (timing & mask); - pci_write_config_dword(pdev, addr1, reg); + pci_write_config_dword(pdev, addr, reg); } /** -- cgit v1.2.3