From 88523a61558a040546bf7d8b079ae0755d8e7005 Mon Sep 17 00:00:00 2001 From: Sam Bradshaw Date: Tue, 30 Aug 2011 08:34:26 -0600 Subject: block: Add driver for Micron RealSSD pcie flash cards This adds mtip32xx, a driver supporting Microns line of pci-express flash storage cards. Signed-off-by: Asai Thambi S P Signed-off-by: Sam Bradshaw Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.h | 445 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 445 insertions(+) create mode 100644 drivers/block/mtip32xx/mtip32xx.h (limited to 'drivers/block/mtip32xx/mtip32xx.h') diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h new file mode 100644 index 000000000000..3423d18e7c86 --- /dev/null +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -0,0 +1,445 @@ +/* + * mtip32xx.h - Header file for the P320 SSD Block Driver + * Copyright (C) 2011 Micron Technology, Inc. + * + * Portions of this code were derived from works subjected to the + * following copyright: + * Copyright (C) 2009 Integrated Device Technology, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MTIP32XX_H__ +#define __MTIP32XX_H__ + +#include +#include +#include +#include +#include +#include + +/* Offset of Subsystem Device ID in pci confoguration space */ +#define PCI_SUBSYSTEM_DEVICEID 0x2E + +/* offset of Device Control register in PCIe extended capabilites space */ +#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 + +/* # of times to retry timed out IOs */ +#define MTIP_MAX_RETRIES 5 + +/* Various timeout values in ms */ +#define MTIP_NCQ_COMMAND_TIMEOUT_MS 5000 +#define MTIP_IOCTL_COMMAND_TIMEOUT_MS 5000 +#define MTIP_INTERNAL_COMMAND_TIMEOUT_MS 5000 + +/* check for timeouts every 500ms */ +#define MTIP_TIMEOUT_CHECK_PERIOD 500 + +/* ftl rebuild */ +#define MTIP_FTL_REBUILD_OFFSET 142 +#define MTIP_FTL_REBUILD_MAGIC 0xed51 +#define MTIP_FTL_REBUILD_TIMEOUT_MS 2400000 + +/* Macro to extract the tag bit number from a tag value. */ +#define MTIP_TAG_BIT(tag) (tag & 0x1f) + +/* + * Macro to extract the tag index from a tag value. The index + * is used to access the correct s_active/Command Issue register based + * on the tag value. + */ +#define MTIP_TAG_INDEX(tag) (tag >> 5) + +/* + * Maximum number of scatter gather entries + * a single command may have. + */ +#define MTIP_MAX_SG 128 + +/* + * Maximum number of slot groups (Command Issue & s_active registers) + * NOTE: This is the driver maximum; check dd->slot_groups for actual value. + */ +#define MTIP_MAX_SLOT_GROUPS 8 + +/* Internal command tag. */ +#define MTIP_TAG_INTERNAL 0 + +/* Micron Vendor ID & P320x SSD Device ID */ +#define PCI_VENDOR_ID_MICRON 0x1344 +#define P320_DEVICE_ID 0x5150 + +/* Driver name and version strings */ +#define MTIP_DRV_NAME "mtip32xx" +#define MTIP_DRV_VERSION "1.2.6os2" + +/* Maximum number of minor device numbers per device. */ +#define MTIP_MAX_MINORS 16 + +/* Maximum number of supported command slots. */ +#define MTIP_MAX_COMMAND_SLOTS (MTIP_MAX_SLOT_GROUPS * 32) + +/* + * Per-tag bitfield size in longs. + * Linux bit manipulation functions + * (i.e. test_and_set_bit, find_next_zero_bit) + * manipulate memory in longs, so we try to make the math work. + * take the slot groups and find the number of longs, rounding up. + * Careful! i386 and x86_64 use different size longs! + */ +#define U32_PER_LONG (sizeof(long) / sizeof(u32)) +#define SLOTBITS_IN_LONGS ((MTIP_MAX_SLOT_GROUPS + \ + (U32_PER_LONG-1))/U32_PER_LONG) + +/* BAR number used to access the HBA registers. */ +#define MTIP_ABAR 5 + +/* Forced Unit Access Bit */ +#define FUA_BIT 0x80 + +#ifdef DEBUG + #define dbg_printk(format, arg...) \ + printk(pr_fmt(format), ##arg); +#else + #define dbg_printk(format, arg...) +#endif + +/* Register Frame Information Structure (FIS), host to device. */ +struct host_to_dev_fis { + /* + * FIS type. + * - 27h Register FIS, host to device. + * - 34h Register FIS, device to host. + * - 39h DMA Activate FIS, device to host. + * - 41h DMA Setup FIS, bi-directional. + * - 46h Data FIS, bi-directional. + * - 58h BIST Activate FIS, bi-directional. + * - 5Fh PIO Setup FIS, device to host. + * - A1h Set Device Bits FIS, device to host. + */ + unsigned char type; + unsigned char opts; + unsigned char command; + unsigned char features; + + union { + unsigned char lba_low; + unsigned char sector; + }; + union { + unsigned char lba_mid; + unsigned char cyl_low; + }; + union { + unsigned char lba_hi; + unsigned char cyl_hi; + }; + union { + unsigned char device; + unsigned char head; + }; + + union { + unsigned char lba_low_ex; + unsigned char sector_ex; + }; + union { + unsigned char lba_mid_ex; + unsigned char cyl_low_ex; + }; + union { + unsigned char lba_hi_ex; + unsigned char cyl_hi_ex; + }; + unsigned char features_ex; + + unsigned char sect_count; + unsigned char sect_cnt_ex; + unsigned char res2; + unsigned char control; + + unsigned int res3; +}; + +/* Command header structure. */ +struct mtip_cmd_hdr { + /* + * Command options. + * - Bits 31:16 Number of PRD entries. + * - Bits 15:8 Unused in this implementation. + * - Bit 7 Prefetch bit, informs the drive to prefetch PRD entries. + * - Bit 6 Write bit, should be set when writing data to the device. + * - Bit 5 Unused in this implementation. + * - Bits 4:0 Length of the command FIS in DWords (DWord = 4 bytes). + */ + unsigned int opts; + /* This field is unsed when using NCQ. */ + union { + unsigned int byte_count; + unsigned int status; + }; + /* + * Lower 32 bits of the command table address associated with this + * header. The command table addresses must be 128 byte aligned. + */ + unsigned int ctba; + /* + * If 64 bit addressing is used this field is the upper 32 bits + * of the command table address associated with this command. + */ + unsigned int ctbau; + /* Reserved and unused. */ + unsigned int res[4]; +}; + +/* Command scatter gather structure (PRD). */ +struct mtip_cmd_sg { + /* + * Low 32 bits of the data buffer address. For P320 this + * address must be 8 byte aligned signified by bits 2:0 being + * set to 0. + */ + unsigned int dba; + /* + * When 64 bit addressing is used this field is the upper + * 32 bits of the data buffer address. + */ + unsigned int dba_upper; + /* Unused. */ + unsigned int reserved; + /* + * Bit 31: interrupt when this data block has been transferred. + * Bits 30..22: reserved + * Bits 21..0: byte count (minus 1). For P320 the byte count must be + * 8 byte aligned signified by bits 2:0 being set to 1. + */ + unsigned int info; +}; +struct mtip_port; + +/* Structure used to describe a command. */ +struct mtip_cmd { + + struct mtip_cmd_hdr *command_header; /* ptr to command header entry */ + + dma_addr_t command_header_dma; /* corresponding physical address */ + + void *command; /* ptr to command table entry */ + + dma_addr_t command_dma; /* corresponding physical address */ + + void *comp_data; /* data passed to completion function comp_func() */ + /* + * Completion function called by the ISR upon completion of + * a command. + */ + void (*comp_func)(struct mtip_port *port, + int tag, + void *data, + int status); + /* Additional callback function that may be called by comp_func() */ + void (*async_callback)(void *data, int status); + + void *async_data; /* Addl. data passed to async_callback() */ + + int scatter_ents; /* Number of scatter list entries used */ + + struct scatterlist sg[MTIP_MAX_SG]; /* Scatter list entries */ + + int retries; /* The number of retries left for this command. */ + + int direction; /* Data transfer direction */ + + unsigned long comp_time; /* command completion time, in jiffies */ + + atomic_t active; /* declares if this command sent to the drive. */ +}; + +/* Structure used to describe a port. */ +struct mtip_port { + /* Pointer back to the driver data for this port. */ + struct driver_data *dd; + /* + * Used to determine if the data pointed to by the + * identify field is valid. + */ + unsigned long identify_valid; + /* Base address of the memory mapped IO for the port. */ + void __iomem *mmio; + /* Array of pointers to the memory mapped s_active registers. */ + void __iomem *s_active[MTIP_MAX_SLOT_GROUPS]; + /* Array of pointers to the memory mapped completed registers. */ + void __iomem *completed[MTIP_MAX_SLOT_GROUPS]; + /* Array of pointers to the memory mapped Command Issue registers. */ + void __iomem *cmd_issue[MTIP_MAX_SLOT_GROUPS]; + /* + * Pointer to the beginning of the command header memory as used + * by the driver. + */ + void *command_list; + /* + * Pointer to the beginning of the command header memory as used + * by the DMA. + */ + dma_addr_t command_list_dma; + /* + * Pointer to the beginning of the RX FIS memory as used + * by the driver. + */ + void *rxfis; + /* + * Pointer to the beginning of the RX FIS memory as used + * by the DMA. + */ + dma_addr_t rxfis_dma; + /* + * Pointer to the beginning of the command table memory as used + * by the driver. + */ + void *command_table; + /* + * Pointer to the beginning of the command table memory as used + * by the DMA. + */ + dma_addr_t command_tbl_dma; + /* + * Pointer to the beginning of the identify data memory as used + * by the driver. + */ + u16 *identify; + /* + * Pointer to the beginning of the identify data memory as used + * by the DMA. + */ + dma_addr_t identify_dma; + /* + * Pointer to the beginning of a sector buffer that is used + * by the driver when issuing internal commands. + */ + u16 *sector_buffer; + /* + * Pointer to the beginning of a sector buffer that is used + * by the DMA when the driver issues internal commands. + */ + dma_addr_t sector_buffer_dma; + /* + * Bit significant, used to determine if a command slot has + * been allocated. i.e. the slot is in use. Bits are cleared + * when the command slot and all associated data structures + * are no longer needed. + */ + unsigned long allocated[SLOTBITS_IN_LONGS]; + /* + * Array of command slots. Structure includes pointers to the + * command header and command table, and completion function and data + * pointers. + */ + struct mtip_cmd commands[MTIP_MAX_COMMAND_SLOTS]; + /* Non-zero if an internal command is in progress. */ + int internal_cmd_in_progress; + /* + * Timer used to complete commands that have been active for too long. + */ + struct timer_list cmd_timer; + /* + * Semaphore used to block threads if there are no + * command slots available. + */ + struct semaphore cmd_slot; + /* Spinlock for working around command-issue bug. */ + spinlock_t cmd_issue_lock; +}; + +/* + * Driver private data structure. + * + * One structure is allocated per probed device. + */ +struct driver_data { + void __iomem *mmio; /* Base address of the HBA registers. */ + + int major; /* Major device number. */ + + int instance; /* Instance number. First device probed is 0, ... */ + + int protocol; /* FIXME: Protocol ops array index. */ + + struct gendisk *disk; /* Pointer to our gendisk structure. */ + + struct pci_dev *pdev; /* Pointer to the PCI device structure. */ + + struct request_queue *queue; /* Our request queue. */ + /* + * Semaphore used to lock out read/write commands during the + * execution of an internal command. + */ + struct rw_semaphore internal_sem; + + struct mtip_port *port; /* Pointer to the port data structure. */ + + /* Tasklet used to process the bottom half of the ISR. */ + struct tasklet_struct tasklet; + + unsigned product_type; /* magic value declaring the product type */ + + unsigned slot_groups; /* number of slot groups the product supports */ + + atomic_t drv_cleanup_done; /* Atomic variable for SRSI */ + + unsigned long index; /* Index to determine the disk name */ + + unsigned int ftlrebuildflag; /* FTL rebuild flag */ + + atomic_t resumeflag; /* Atomic variable to track suspend/resume */ + + atomic_t eh_active; /* Flag for error handling tracking */ +}; + +/* Function declarations */ +extern int mtip_block_initialize(struct driver_data *dd); +extern int mtip_block_remove(struct driver_data *dd); +extern int mtip_block_shutdown(struct driver_data *dd); +extern int mtip_block_suspend(struct driver_data *dd); +extern int mtip_block_resume(struct driver_data *dd); +extern int mtip_hw_init(struct driver_data *dd); +extern int mtip_hw_exit(struct driver_data *dd); +extern int mtip_hw_shutdown(struct driver_data *dd); +extern bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors); +extern void mtip_hw_release_scatterlist( + struct driver_data *dd, + int tag); +extern struct scatterlist *mtip_hw_get_scatterlist( + struct driver_data *dd, + int *tag); +extern void mtip_hw_submit_io(struct driver_data *dd, + sector_t start, + int nsect, + int nents, + int tag, + void *callback, + void *data, + int barrier, + int dir); +extern int mtip_hw_ioctl(struct driver_data *dd, + unsigned int cmd, + unsigned long arg, + unsigned char compat); +extern int mtip_hw_sysfs_init(struct driver_data *dd, struct kobject *kobj); +extern int mtip_hw_sysfs_exit(struct driver_data *dd, struct kobject *kobj); +extern int mtip_hw_resume(struct driver_data *dd); +extern int mtip_hw_suspend(struct driver_data *dd); +void mtip_command_cleanup(struct driver_data *dd); +bool mtip_check_surprise_removal(struct pci_dev *pdev); +void mtip_restart_port(struct mtip_port *port); + +#endif -- cgit v1.2.3