From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/char/n_tty.c | 1562 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1562 insertions(+) create mode 100644 drivers/char/n_tty.c (limited to 'drivers/char/n_tty.c') diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c new file mode 100644 index 000000000000..edba5a35bf21 --- /dev/null +++ b/drivers/char/n_tty.c @@ -0,0 +1,1562 @@ +/* + * n_tty.c --- implements the N_TTY line discipline. + * + * This code used to be in tty_io.c, but things are getting hairy + * enough that it made sense to split things off. (The N_TTY + * processing has changed so much that it's hardly recognizable, + * anyway...) + * + * Note that the open routine for N_TTY is guaranteed never to return + * an error. This is because Linux will fall back to setting a line + * to N_TTY if it can not switch to any other line discipline. + * + * Written by Theodore Ts'o, Copyright 1994. + * + * This file also contains code originally written by Linus Torvalds, + * Copyright 1991, 1992, 1993, and by Julian Cowley, Copyright 1994. + * + * This file may be redistributed under the terms of the GNU General Public + * License. + * + * Reduced memory usage for older ARM systems - Russell King. + * + * 2000/01/20 Fixed SMP locking on put_tty_queue using bits of + * the patch by Andrew J. Kroll + * who actually finally proved there really was a race. + * + * 2002/03/18 Implemented n_tty_wakeup to send SIGIO POLL_OUTs to + * waiting writing processes-Sapan Bhatia . + * Also fixed a bug in BLOCKING mode where write_chan returns + * EAGAIN + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* number of characters left in xmit buffer before select has we have room */ +#define WAKEUP_CHARS 256 + +/* + * This defines the low- and high-watermarks for throttling and + * unthrottling the TTY driver. These watermarks are used for + * controlling the space in the read buffer. + */ +#define TTY_THRESHOLD_THROTTLE 128 /* now based on remaining room */ +#define TTY_THRESHOLD_UNTHROTTLE 128 + +static inline unsigned char *alloc_buf(void) +{ + int prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; + + if (PAGE_SIZE != N_TTY_BUF_SIZE) + return kmalloc(N_TTY_BUF_SIZE, prio); + else + return (unsigned char *)__get_free_page(prio); +} + +static inline void free_buf(unsigned char *buf) +{ + if (PAGE_SIZE != N_TTY_BUF_SIZE) + kfree(buf); + else + free_page((unsigned long) buf); +} + +static inline void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty) +{ + if (tty->read_cnt < N_TTY_BUF_SIZE) { + tty->read_buf[tty->read_head] = c; + tty->read_head = (tty->read_head + 1) & (N_TTY_BUF_SIZE-1); + tty->read_cnt++; + } +} + +static inline void put_tty_queue(unsigned char c, struct tty_struct *tty) +{ + unsigned long flags; + /* + * The problem of stomping on the buffers ends here. + * Why didn't anyone see this one coming? --AJK + */ + spin_lock_irqsave(&tty->read_lock, flags); + put_tty_queue_nolock(c, tty); + spin_unlock_irqrestore(&tty->read_lock, flags); +} + +/** + * check_unthrottle - allow new receive data + * @tty; tty device + * + * Check whether to call the driver.unthrottle function. + * We test the TTY_THROTTLED bit first so that it always + * indicates the current state. The decision about whether + * it is worth allowing more input has been taken by the caller. + * Can sleep, may be called under the atomic_read semaphore but + * this is not guaranteed. + */ + +static void check_unthrottle(struct tty_struct * tty) +{ + if (tty->count && + test_and_clear_bit(TTY_THROTTLED, &tty->flags) && + tty->driver->unthrottle) + tty->driver->unthrottle(tty); +} + +/** + * reset_buffer_flags - reset buffer state + * @tty: terminal to reset + * + * Reset the read buffer counters, clear the flags, + * and make sure the driver is unthrottled. Called + * from n_tty_open() and n_tty_flush_buffer(). + */ +static void reset_buffer_flags(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->read_lock, flags); + tty->read_head = tty->read_tail = tty->read_cnt = 0; + spin_unlock_irqrestore(&tty->read_lock, flags); + tty->canon_head = tty->canon_data = tty->erasing = 0; + memset(&tty->read_flags, 0, sizeof tty->read_flags); + check_unthrottle(tty); +} + +/** + * n_tty_flush_buffer - clean input queue + * @tty: terminal device + * + * Flush the input buffer. Called when the line discipline is + * being closed, when the tty layer wants the buffer flushed (eg + * at hangup) or when the N_TTY line discipline internally has to + * clean the pending queue (for example some signals). + * + * FIXME: tty->ctrl_status is not spinlocked and relies on + * lock_kernel() still. + */ + +static void n_tty_flush_buffer(struct tty_struct * tty) +{ + /* clear everything and unthrottle the driver */ + reset_buffer_flags(tty); + + if (!tty->link) + return; + + if (tty->link->packet) { + tty->ctrl_status |= TIOCPKT_FLUSHREAD; + wake_up_interruptible(&tty->link->read_wait); + } +} + +/** + * n_tty_chars_in_buffer - report available bytes + * @tty: tty device + * + * Report the number of characters buffered to be delivered to user + * at this instant in time. + */ + +static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty) +{ + unsigned long flags; + ssize_t n = 0; + + spin_lock_irqsave(&tty->read_lock, flags); + if (!tty->icanon) { + n = tty->read_cnt; + } else if (tty->canon_data) { + n = (tty->canon_head > tty->read_tail) ? + tty->canon_head - tty->read_tail : + tty->canon_head + (N_TTY_BUF_SIZE - tty->read_tail); + } + spin_unlock_irqrestore(&tty->read_lock, flags); + return n; +} + +/** + * is_utf8_continuation - utf8 multibyte check + * @c: byte to check + * + * Returns true if the utf8 character 'c' is a multibyte continuation + * character. We use this to correctly compute the on screen size + * of the character when printing + */ + +static inline int is_utf8_continuation(unsigned char c) +{ + return (c & 0xc0) == 0x80; +} + +/** + * is_continuation - multibyte check + * @c: byte to check + * + * Returns true if the utf8 character 'c' is a multibyte continuation + * character and the terminal is in unicode mode. + */ + +static inline int is_continuation(unsigned char c, struct tty_struct *tty) +{ + return I_IUTF8(tty) && is_utf8_continuation(c); +} + +/** + * opost - output post processor + * @c: character (or partial unicode symbol) + * @tty: terminal device + * + * Perform OPOST processing. Returns -1 when the output device is + * full and the character must be retried. Note that Linux currently + * ignores TABDLY, CRDLY, VTDLY, FFDLY and NLDLY. They simply aren't + * relevant in the world today. If you ever need them, add them here. + * + * Called from both the receive and transmit sides and can be called + * re-entrantly. Relies on lock_kernel() still. + */ + +static int opost(unsigned char c, struct tty_struct *tty) +{ + int space, spaces; + + space = tty->driver->write_room(tty); + if (!space) + return -1; + + if (O_OPOST(tty)) { + switch (c) { + case '\n': + if (O_ONLRET(tty)) + tty->column = 0; + if (O_ONLCR(tty)) { + if (space < 2) + return -1; + tty->driver->put_char(tty, '\r'); + tty->column = 0; + } + tty->canon_column = tty->column; + break; + case '\r': + if (O_ONOCR(tty) && tty->column == 0) + return 0; + if (O_OCRNL(tty)) { + c = '\n'; + if (O_ONLRET(tty)) + tty->canon_column = tty->column = 0; + break; + } + tty->canon_column = tty->column = 0; + break; + case '\t': + spaces = 8 - (tty->column & 7); + if (O_TABDLY(tty) == XTABS) { + if (space < spaces) + return -1; + tty->column += spaces; + tty->driver->write(tty, " ", spaces); + return 0; + } + tty->column += spaces; + break; + case '\b': + if (tty->column > 0) + tty->column--; + break; + default: + if (O_OLCUC(tty)) + c = toupper(c); + if (!iscntrl(c) && !is_continuation(c, tty)) + tty->column++; + break; + } + } + tty->driver->put_char(tty, c); + return 0; +} + +/** + * opost_block - block postprocess + * @tty: terminal device + * @inbuf: user buffer + * @nr: number of bytes + * + * This path is used to speed up block console writes, among other + * things when processing blocks of output data. It handles only + * the simple cases normally found and helps to generate blocks of + * symbols for the console driver and thus improve performance. + * + * Called from write_chan under the tty layer write lock. + */ + +static ssize_t opost_block(struct tty_struct * tty, + const unsigned char * buf, unsigned int nr) +{ + int space; + int i; + const unsigned char *cp; + + space = tty->driver->write_room(tty); + if (!space) + return 0; + if (nr > space) + nr = space; + + for (i = 0, cp = buf; i < nr; i++, cp++) { + switch (*cp) { + case '\n': + if (O_ONLRET(tty)) + tty->column = 0; + if (O_ONLCR(tty)) + goto break_out; + tty->canon_column = tty->column; + break; + case '\r': + if (O_ONOCR(tty) && tty->column == 0) + goto break_out; + if (O_OCRNL(tty)) + goto break_out; + tty->canon_column = tty->column = 0; + break; + case '\t': + goto break_out; + case '\b': + if (tty->column > 0) + tty->column--; + break; + default: + if (O_OLCUC(tty)) + goto break_out; + if (!iscntrl(*cp)) + tty->column++; + break; + } + } +break_out: + if (tty->driver->flush_chars) + tty->driver->flush_chars(tty); + i = tty->driver->write(tty, buf, i); + return i; +} + + +/** + * put_char - write character to driver + * @c: character (or part of unicode symbol) + * @tty: terminal device + * + * Queue a byte to the driver layer for output + */ + +static inline void put_char(unsigned char c, struct tty_struct *tty) +{ + tty->driver->put_char(tty, c); +} + +/** + * echo_char - echo characters + * @c: unicode byte to echo + * @tty: terminal device + * + * Echo user input back onto the screen. This must be called only when + * L_ECHO(tty) is true. Called from the driver receive_buf path. + */ + +static void echo_char(unsigned char c, struct tty_struct *tty) +{ + if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t') { + put_char('^', tty); + put_char(c ^ 0100, tty); + tty->column += 2; + } else + opost(c, tty); +} + +static inline void finish_erasing(struct tty_struct *tty) +{ + if (tty->erasing) { + put_char('/', tty); + tty->column++; + tty->erasing = 0; + } +} + +/** + * eraser - handle erase function + * @c: character input + * @tty: terminal device + * + * Perform erase and neccessary output when an erase character is + * present in the stream from the driver layer. Handles the complexities + * of UTF-8 multibyte symbols. + */ + +static void eraser(unsigned char c, struct tty_struct *tty) +{ + enum { ERASE, WERASE, KILL } kill_type; + int head, seen_alnums, cnt; + unsigned long flags; + + if (tty->read_head == tty->canon_head) { + /* opost('\a', tty); */ /* what do you think? */ + return; + } + if (c == ERASE_CHAR(tty)) + kill_type = ERASE; + else if (c == WERASE_CHAR(tty)) + kill_type = WERASE; + else { + if (!L_ECHO(tty)) { + spin_lock_irqsave(&tty->read_lock, flags); + tty->read_cnt -= ((tty->read_head - tty->canon_head) & + (N_TTY_BUF_SIZE - 1)); + tty->read_head = tty->canon_head; + spin_unlock_irqrestore(&tty->read_lock, flags); + return; + } + if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) { + spin_lock_irqsave(&tty->read_lock, flags); + tty->read_cnt -= ((tty->read_head - tty->canon_head) & + (N_TTY_BUF_SIZE - 1)); + tty->read_head = tty->canon_head; + spin_unlock_irqrestore(&tty->read_lock, flags); + finish_erasing(tty); + echo_char(KILL_CHAR(tty), tty); + /* Add a newline if ECHOK is on and ECHOKE is off. */ + if (L_ECHOK(tty)) + opost('\n', tty); + return; + } + kill_type = KILL; + } + + seen_alnums = 0; + while (tty->read_head != tty->canon_head) { + head = tty->read_head; + + /* erase a single possibly multibyte character */ + do { + head = (head - 1) & (N_TTY_BUF_SIZE-1); + c = tty->read_buf[head]; + } while (is_continuation(c, tty) && head != tty->canon_head); + + /* do not partially erase */ + if (is_continuation(c, tty)) + break; + + if (kill_type == WERASE) { + /* Equivalent to BSD's ALTWERASE. */ + if (isalnum(c) || c == '_') + seen_alnums++; + else if (seen_alnums) + break; + } + cnt = (tty->read_head - head) & (N_TTY_BUF_SIZE-1); + spin_lock_irqsave(&tty->read_lock, flags); + tty->read_head = head; + tty->read_cnt -= cnt; + spin_unlock_irqrestore(&tty->read_lock, flags); + if (L_ECHO(tty)) { + if (L_ECHOPRT(tty)) { + if (!tty->erasing) { + put_char('\\', tty); + tty->column++; + tty->erasing = 1; + } + /* if cnt > 1, output a multi-byte character */ + echo_char(c, tty); + while (--cnt > 0) { + head = (head+1) & (N_TTY_BUF_SIZE-1); + put_char(tty->read_buf[head], tty); + } + } else if (kill_type == ERASE && !L_ECHOE(tty)) { + echo_char(ERASE_CHAR(tty), tty); + } else if (c == '\t') { + unsigned int col = tty->canon_column; + unsigned long tail = tty->canon_head; + + /* Find the column of the last char. */ + while (tail != tty->read_head) { + c = tty->read_buf[tail]; + if (c == '\t') + col = (col | 7) + 1; + else if (iscntrl(c)) { + if (L_ECHOCTL(tty)) + col += 2; + } else if (!is_continuation(c, tty)) + col++; + tail = (tail+1) & (N_TTY_BUF_SIZE-1); + } + + /* should never happen */ + if (tty->column > 0x80000000) + tty->column = 0; + + /* Now backup to that column. */ + while (tty->column > col) { + /* Can't use opost here. */ + put_char('\b', tty); + if (tty->column > 0) + tty->column--; + } + } else { + if (iscntrl(c) && L_ECHOCTL(tty)) { + put_char('\b', tty); + put_char(' ', tty); + put_char('\b', tty); + if (tty->column > 0) + tty->column--; + } + if (!iscntrl(c) || L_ECHOCTL(tty)) { + put_char('\b', tty); + put_char(' ', tty); + put_char('\b', tty); + if (tty->column > 0) + tty->column--; + } + } + } + if (kill_type == ERASE) + break; + } + if (tty->read_head == tty->canon_head) + finish_erasing(tty); +} + +/** + * isig - handle the ISIG optio + * @sig: signal + * @tty: terminal + * @flush: force flush + * + * Called when a signal is being sent due to terminal input. This + * may caus terminal flushing to take place according to the termios + * settings and character used. Called from the driver receive_buf + * path so serialized. + */ + +static inline void isig(int sig, struct tty_struct *tty, int flush) +{ + if (tty->pgrp > 0) + kill_pg(tty->pgrp, sig, 1); + if (flush || !L_NOFLSH(tty)) { + n_tty_flush_buffer(tty); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + } +} + +/** + * n_tty_receive_break - handle break + * @tty: terminal + * + * An RS232 break event has been hit in the incoming bitstream. This + * can cause a variety of events depending upon the termios settings. + * + * Called from the receive_buf path so single threaded. + */ + +static inline void n_tty_receive_break(struct tty_struct *tty) +{ + if (I_IGNBRK(tty)) + return; + if (I_BRKINT(tty)) { + isig(SIGINT, tty, 1); + return; + } + if (I_PARMRK(tty)) { + put_tty_queue('\377', tty); + put_tty_queue('\0', tty); + } + put_tty_queue('\0', tty); + wake_up_interruptible(&tty->read_wait); +} + +/** + * n_tty_receive_overrun - handle overrun reporting + * @tty: terminal + * + * Data arrived faster than we could process it. While the tty + * driver has flagged this the bits that were missed are gone + * forever. + * + * Called from the receive_buf path so single threaded. Does not + * need locking as num_overrun and overrun_time are function + * private. + */ + +static inline void n_tty_receive_overrun(struct tty_struct *tty) +{ + char buf[64]; + + tty->num_overrun++; + if (time_before(tty->overrun_time, jiffies - HZ) || + time_after(tty->overrun_time, jiffies)) { + printk(KERN_WARNING "%s: %d input overrun(s)\n", + tty_name(tty, buf), + tty->num_overrun); + tty->overrun_time = jiffies; + tty->num_overrun = 0; + } +} + +/** + * n_tty_receive_parity_error - error notifier + * @tty: terminal device + * @c: character + * + * Process a parity error and queue the right data to indicate + * the error case if neccessary. Locking as per n_tty_receive_buf. + */ +static inline void n_tty_receive_parity_error(struct tty_struct *tty, + unsigned char c) +{ + if (I_IGNPAR(tty)) { + return; + } + if (I_PARMRK(tty)) { + put_tty_queue('\377', tty); + put_tty_queue('\0', tty); + put_tty_queue(c, tty); + } else if (I_INPCK(tty)) + put_tty_queue('\0', tty); + else + put_tty_queue(c, tty); + wake_up_interruptible(&tty->read_wait); +} + +/** + * n_tty_receive_char - perform processing + * @tty: terminal device + * @c: character + * + * Process an individual character of input received from the driver. + * This is serialized with respect to itself by the rules for the + * driver above. + */ + +static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c) +{ + unsigned long flags; + + if (tty->raw) { + put_tty_queue(c, tty); + return; + } + + if (tty->stopped && !tty->flow_stopped && + I_IXON(tty) && I_IXANY(tty)) { + start_tty(tty); + return; + } + + if (I_ISTRIP(tty)) + c &= 0x7f; + if (I_IUCLC(tty) && L_IEXTEN(tty)) + c=tolower(c); + + if (tty->closing) { + if (I_IXON(tty)) { + if (c == START_CHAR(tty)) + start_tty(tty); + else if (c == STOP_CHAR(tty)) + stop_tty(tty); + } + return; + } + + /* + * If the previous character was LNEXT, or we know that this + * character is not one of the characters that we'll have to + * handle specially, do shortcut processing to speed things + * up. + */ + if (!test_bit(c, tty->process_char_map) || tty->lnext) { + finish_erasing(tty); + tty->lnext = 0; + if (L_ECHO(tty)) { + if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { + put_char('\a', tty); /* beep if no space */ + return; + } + /* Record the column of first canon char. */ + if (tty->canon_head == tty->read_head) + tty->canon_column = tty->column; + echo_char(c, tty); + } + if (I_PARMRK(tty) && c == (unsigned char) '\377') + put_tty_queue(c, tty); + put_tty_queue(c, tty); + return; + } + + if (c == '\r') { + if (I_IGNCR(tty)) + return; + if (I_ICRNL(tty)) + c = '\n'; + } else if (c == '\n' && I_INLCR(tty)) + c = '\r'; + if (I_IXON(tty)) { + if (c == START_CHAR(tty)) { + start_tty(tty); + return; + } + if (c == STOP_CHAR(tty)) { + stop_tty(tty); + return; + } + } + if (L_ISIG(tty)) { + int signal; + signal = SIGINT; + if (c == INTR_CHAR(tty)) + goto send_signal; + signal = SIGQUIT; + if (c == QUIT_CHAR(tty)) + goto send_signal; + signal = SIGTSTP; + if (c == SUSP_CHAR(tty)) { +send_signal: + isig(signal, tty, 0); + return; + } + } + if (tty->icanon) { + if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) || + (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) { + eraser(c, tty); + return; + } + if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) { + tty->lnext = 1; + if (L_ECHO(tty)) { + finish_erasing(tty); + if (L_ECHOCTL(tty)) { + put_char('^', tty); + put_char('\b', tty); + } + } + return; + } + if (c == REPRINT_CHAR(tty) && L_ECHO(tty) && + L_IEXTEN(tty)) { + unsigned long tail = tty->canon_head; + + finish_erasing(tty); + echo_char(c, tty); + opost('\n', tty); + while (tail != tty->read_head) { + echo_char(tty->read_buf[tail], tty); + tail = (tail+1) & (N_TTY_BUF_SIZE-1); + } + return; + } + if (c == '\n') { + if (L_ECHO(tty) || L_ECHONL(tty)) { + if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { + put_char('\a', tty); + return; + } + opost('\n', tty); + } + goto handle_newline; + } + if (c == EOF_CHAR(tty)) { + if (tty->canon_head != tty->read_head) + set_bit(TTY_PUSH, &tty->flags); + c = __DISABLED_CHAR; + goto handle_newline; + } + if ((c == EOL_CHAR(tty)) || + (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) { + /* + * XXX are EOL_CHAR and EOL2_CHAR echoed?!? + */ + if (L_ECHO(tty)) { + if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { + put_char('\a', tty); + return; + } + /* Record the column of first canon char. */ + if (tty->canon_head == tty->read_head) + tty->canon_column = tty->column; + echo_char(c, tty); + } + /* + * XXX does PARMRK doubling happen for + * EOL_CHAR and EOL2_CHAR? + */ + if (I_PARMRK(tty) && c == (unsigned char) '\377') + put_tty_queue(c, tty); + + handle_newline: + spin_lock_irqsave(&tty->read_lock, flags); + set_bit(tty->read_head, tty->read_flags); + put_tty_queue_nolock(c, tty); + tty->canon_head = tty->read_head; + tty->canon_data++; + spin_unlock_irqrestore(&tty->read_lock, flags); + kill_fasync(&tty->fasync, SIGIO, POLL_IN); + if (waitqueue_active(&tty->read_wait)) + wake_up_interruptible(&tty->read_wait); + return; + } + } + + finish_erasing(tty); + if (L_ECHO(tty)) { + if (tty->read_cnt >= N_TTY_BUF_SIZE-1) { + put_char('\a', tty); /* beep if no space */ + return; + } + if (c == '\n') + opost('\n', tty); + else { + /* Record the column of first canon char. */ + if (tty->canon_head == tty->read_head) + tty->canon_column = tty->column; + echo_char(c, tty); + } + } + + if (I_PARMRK(tty) && c == (unsigned char) '\377') + put_tty_queue(c, tty); + + put_tty_queue(c, tty); +} + +/** + * n_tty_receive_room - receive space + * @tty: terminal + * + * Called by the driver to find out how much data it is + * permitted to feed to the line discipline without any being lost + * and thus to manage flow control. Not serialized. Answers for the + * "instant". + */ + +static int n_tty_receive_room(struct tty_struct *tty) +{ + int left = N_TTY_BUF_SIZE - tty->read_cnt - 1; + + /* + * If we are doing input canonicalization, and there are no + * pending newlines, let characters through without limit, so + * that erase characters will be handled. Other excess + * characters will be beeped. + */ + if (tty->icanon && !tty->canon_data) + return N_TTY_BUF_SIZE; + + if (left > 0) + return left; + return 0; +} + +/** + * n_tty_write_wakeup - asynchronous I/O notifier + * @tty: tty device + * + * Required for the ptys, serial driver etc. since processes + * that attach themselves to the master and rely on ASYNC + * IO must be woken up + */ + +static void n_tty_write_wakeup(struct tty_struct *tty) +{ + if (tty->fasync) + { + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + kill_fasync(&tty->fasync, SIGIO, POLL_OUT); + } + return; +} + +/** + * n_tty_receive_buf - data receive + * @tty: terminal device + * @cp: buffer + * @fp: flag buffer + * @count: characters + * + * Called by the terminal driver when a block of characters has + * been received. This function must be called from soft contexts + * not from interrupt context. The driver is responsible for making + * calls one at a time and in order (or using flush_to_ldisc) + */ + +static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) +{ + const unsigned char *p; + char *f, flags = TTY_NORMAL; + int i; + char buf[64]; + unsigned long cpuflags; + + if (!tty->read_buf) + return; + + if (tty->real_raw) { + spin_lock_irqsave(&tty->read_lock, cpuflags); + i = min(N_TTY_BUF_SIZE - tty->read_cnt, + N_TTY_BUF_SIZE - tty->read_head); + i = min(count, i); + memcpy(tty->read_buf + tty->read_head, cp, i); + tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1); + tty->read_cnt += i; + cp += i; + count -= i; + + i = min(N_TTY_BUF_SIZE - tty->read_cnt, + N_TTY_BUF_SIZE - tty->read_head); + i = min(count, i); + memcpy(tty->read_buf + tty->read_head, cp, i); + tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1); + tty->read_cnt += i; + spin_unlock_irqrestore(&tty->read_lock, cpuflags); + } else { + for (i=count, p = cp, f = fp; i; i--, p++) { + if (f) + flags = *f++; + switch (flags) { + case TTY_NORMAL: + n_tty_receive_char(tty, *p); + break; + case TTY_BREAK: + n_tty_receive_break(tty); + break; + case TTY_PARITY: + case TTY_FRAME: + n_tty_receive_parity_error(tty, *p); + break; + case TTY_OVERRUN: + n_tty_receive_overrun(tty); + break; + default: + printk("%s: unknown flag %d\n", + tty_name(tty, buf), flags); + break; + } + } + if (tty->driver->flush_chars) + tty->driver->flush_chars(tty); + } + + if (!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) { + kill_fasync(&tty->fasync, SIGIO, POLL_IN); + if (waitqueue_active(&tty->read_wait)) + wake_up_interruptible(&tty->read_wait); + } + + /* + * Check the remaining room for the input canonicalization + * mode. We don't want to throttle the driver if we're in + * canonical mode and don't have a newline yet! + */ + if (n_tty_receive_room(tty) < TTY_THRESHOLD_THROTTLE) { + /* check TTY_THROTTLED first so it indicates our state */ + if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) && + tty->driver->throttle) + tty->driver->throttle(tty); + } +} + +int is_ignored(int sig) +{ + return (sigismember(¤t->blocked, sig) || + current->sighand->action[sig-1].sa.sa_handler == SIG_IGN); +} + +/** + * n_tty_set_termios - termios data changed + * @tty: terminal + * @old: previous data + * + * Called by the tty layer when the user changes termios flags so + * that the line discipline can plan ahead. This function cannot sleep + * and is protected from re-entry by the tty layer. The user is + * guaranteed that this function will not be re-entered or in progress + * when the ldisc is closed. + */ + +static void n_tty_set_termios(struct tty_struct *tty, struct termios * old) +{ + if (!tty) + return; + + tty->icanon = (L_ICANON(tty) != 0); + if (test_bit(TTY_HW_COOK_IN, &tty->flags)) { + tty->raw = 1; + tty->real_raw = 1; + return; + } + if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) || + I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) || + I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) || + I_PARMRK(tty)) { + memset(tty->process_char_map, 0, 256/8); + + if (I_IGNCR(tty) || I_ICRNL(tty)) + set_bit('\r', tty->process_char_map); + if (I_INLCR(tty)) + set_bit('\n', tty->process_char_map); + + if (L_ICANON(tty)) { + set_bit(ERASE_CHAR(tty), tty->process_char_map); + set_bit(KILL_CHAR(tty), tty->process_char_map); + set_bit(EOF_CHAR(tty), tty->process_char_map); + set_bit('\n', tty->process_char_map); + set_bit(EOL_CHAR(tty), tty->process_char_map); + if (L_IEXTEN(tty)) { + set_bit(WERASE_CHAR(tty), + tty->process_char_map); + set_bit(LNEXT_CHAR(tty), + tty->process_char_map); + set_bit(EOL2_CHAR(tty), + tty->process_char_map); + if (L_ECHO(tty)) + set_bit(REPRINT_CHAR(tty), + tty->process_char_map); + } + } + if (I_IXON(tty)) { + set_bit(START_CHAR(tty), tty->process_char_map); + set_bit(STOP_CHAR(tty), tty->process_char_map); + } + if (L_ISIG(tty)) { + set_bit(INTR_CHAR(tty), tty->process_char_map); + set_bit(QUIT_CHAR(tty), tty->process_char_map); + set_bit(SUSP_CHAR(tty), tty->process_char_map); + } + clear_bit(__DISABLED_CHAR, tty->process_char_map); + tty->raw = 0; + tty->real_raw = 0; + } else { + tty->raw = 1; + if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) && + (I_IGNPAR(tty) || !I_INPCK(tty)) && + (tty->driver->flags & TTY_DRIVER_REAL_RAW)) + tty->real_raw = 1; + else + tty->real_raw = 0; + } +} + +/** + * n_tty_close - close the ldisc for this tty + * @tty: device + * + * Called from the terminal layer when this line discipline is + * being shut down, either because of a close or becsuse of a + * discipline change. The function will not be called while other + * ldisc methods are in progress. + */ + +static void n_tty_close(struct tty_struct *tty) +{ + n_tty_flush_buffer(tty); + if (tty->read_buf) { + free_buf(tty->read_buf); + tty->read_buf = NULL; + } +} + +/** + * n_tty_open - open an ldisc + * @tty: terminal to open + * + * Called when this line discipline is being attached to the + * terminal device. Can sleep. Called serialized so that no + * other events will occur in parallel. No further open will occur + * until a close. + */ + +static int n_tty_open(struct tty_struct *tty) +{ + if (!tty) + return -EINVAL; + + /* This one is ugly. Currently a malloc failure here can panic */ + if (!tty->read_buf) { + tty->read_buf = alloc_buf(); + if (!tty->read_buf) + return -ENOMEM; + } + memset(tty->read_buf, 0, N_TTY_BUF_SIZE); + reset_buffer_flags(tty); + tty->column = 0; + n_tty_set_termios(tty, NULL); + tty->minimum_to_wake = 1; + tty->closing = 0; + return 0; +} + +static inline int input_available_p(struct tty_struct *tty, int amt) +{ + if (tty->icanon) { + if (tty->canon_data) + return 1; + } else if (tty->read_cnt >= (amt ? amt : 1)) + return 1; + + return 0; +} + +/** + * copy_from_read_buf - copy read data directly + * @tty: terminal device + * @b: user data + * @nr: size of data + * + * Helper function to speed up read_chan. It is only called when + * ICANON is off; it copies characters straight from the tty queue to + * user space directly. It can be profitably called twice; once to + * drain the space from the tail pointer to the (physical) end of the + * buffer, and once to drain the space from the (physical) beginning of + * the buffer to head pointer. + * + * Called under the tty->atomic_read sem and with TTY_DONT_FLIP set + * + */ + +static inline int copy_from_read_buf(struct tty_struct *tty, + unsigned char __user **b, + size_t *nr) + +{ + int retval; + size_t n; + unsigned long flags; + + retval = 0; + spin_lock_irqsave(&tty->read_lock, flags); + n = min(tty->read_cnt, N_TTY_BUF_SIZE - tty->read_tail); + n = min(*nr, n); + spin_unlock_irqrestore(&tty->read_lock, flags); + if (n) { + mb(); + retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n); + n -= retval; + spin_lock_irqsave(&tty->read_lock, flags); + tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1); + tty->read_cnt -= n; + spin_unlock_irqrestore(&tty->read_lock, flags); + *b += n; + *nr -= n; + } + return retval; +} + +extern ssize_t redirected_tty_write(struct file *,const char *,size_t,loff_t *); + +/** + * job_control - check job control + * @tty: tty + * @file: file handle + * + * Perform job control management checks on this file/tty descriptor + * and if appropriate send any needed signals and return a negative + * error code if action should be taken. + */ + +static int job_control(struct tty_struct *tty, struct file *file) +{ + /* Job control check -- must be done at start and after + every sleep (POSIX.1 7.1.1.4). */ + /* NOTE: not yet done after every sleep pending a thorough + check of the logic of this change. -- jlc */ + /* don't stop on /dev/console */ + if (file->f_op->write != redirected_tty_write && + current->signal->tty == tty) { + if (tty->pgrp <= 0) + printk("read_chan: tty->pgrp <= 0!\n"); + else if (process_group(current) != tty->pgrp) { + if (is_ignored(SIGTTIN) || + is_orphaned_pgrp(process_group(current))) + return -EIO; + kill_pg(process_group(current), SIGTTIN, 1); + return -ERESTARTSYS; + } + } + return 0; +} + + +/** + * read_chan - read function for tty + * @tty: tty device + * @file: file object + * @buf: userspace buffer pointer + * @nr: size of I/O + * + * Perform reads for the line discipline. We are guaranteed that the + * line discipline will not be closed under us but we may get multiple + * parallel readers and must handle this ourselves. We may also get + * a hangup. Always called in user context, may sleep. + * + * This code must be sure never to sleep through a hangup. + */ + +static ssize_t read_chan(struct tty_struct *tty, struct file *file, + unsigned char __user *buf, size_t nr) +{ + unsigned char __user *b = buf; + DECLARE_WAITQUEUE(wait, current); + int c; + int minimum, time; + ssize_t retval = 0; + ssize_t size; + long timeout; + unsigned long flags; + +do_it_again: + + if (!tty->read_buf) { + printk("n_tty_read_chan: called with read_buf == NULL?!?\n"); + return -EIO; + } + + c = job_control(tty, file); + if(c < 0) + return c; + + minimum = time = 0; + timeout = MAX_SCHEDULE_TIMEOUT; + if (!tty->icanon) { + time = (HZ / 10) * TIME_CHAR(tty); + minimum = MIN_CHAR(tty); + if (minimum) { + if (time) + tty->minimum_to_wake = 1; + else if (!waitqueue_active(&tty->read_wait) || + (tty->minimum_to_wake > minimum)) + tty->minimum_to_wake = minimum; + } else { + timeout = 0; + if (time) { + timeout = time; + time = 0; + } + tty->minimum_to_wake = minimum = 1; + } + } + + /* + * Internal serialization of reads. + */ + if (file->f_flags & O_NONBLOCK) { + if (down_trylock(&tty->atomic_read)) + return -EAGAIN; + } + else { + if (down_interruptible(&tty->atomic_read)) + return -ERESTARTSYS; + } + + add_wait_queue(&tty->read_wait, &wait); + set_bit(TTY_DONT_FLIP, &tty->flags); + while (nr) { + /* First test for status change. */ + if (tty->packet && tty->link->ctrl_status) { + unsigned char cs; + if (b != buf) + break; + cs = tty->link->ctrl_status; + tty->link->ctrl_status = 0; + if (put_user(cs, b++)) { + retval = -EFAULT; + b--; + break; + } + nr--; + break; + } + /* This statement must be first before checking for input + so that any interrupt will set the state back to + TASK_RUNNING. */ + set_current_state(TASK_INTERRUPTIBLE); + + if (((minimum - (b - buf)) < tty->minimum_to_wake) && + ((minimum - (b - buf)) >= 1)) + tty->minimum_to_wake = (minimum - (b - buf)); + + if (!input_available_p(tty, 0)) { + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { + retval = -EIO; + break; + } + if (tty_hung_up_p(file)) + break; + if (!timeout) + break; + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + break; + } + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + clear_bit(TTY_DONT_FLIP, &tty->flags); + timeout = schedule_timeout(timeout); + set_bit(TTY_DONT_FLIP, &tty->flags); + continue; + } + __set_current_state(TASK_RUNNING); + + /* Deal with packet mode. */ + if (tty->packet && b == buf) { + if (put_user(TIOCPKT_DATA, b++)) { + retval = -EFAULT; + b--; + break; + } + nr--; + } + + if (tty->icanon) { + /* N.B. avoid overrun if nr == 0 */ + while (nr && tty->read_cnt) { + int eol; + + eol = test_and_clear_bit(tty->read_tail, + tty->read_flags); + c = tty->read_buf[tty->read_tail]; + spin_lock_irqsave(&tty->read_lock, flags); + tty->read_tail = ((tty->read_tail+1) & + (N_TTY_BUF_SIZE-1)); + tty->read_cnt--; + if (eol) { + /* this test should be redundant: + * we shouldn't be reading data if + * canon_data is 0 + */ + if (--tty->canon_data < 0) + tty->canon_data = 0; + } + spin_unlock_irqrestore(&tty->read_lock, flags); + + if (!eol || (c != __DISABLED_CHAR)) { + if (put_user(c, b++)) { + retval = -EFAULT; + b--; + break; + } + nr--; + } + if (eol) + break; + } + if (retval) + break; + } else { + int uncopied; + uncopied = copy_from_read_buf(tty, &b, &nr); + uncopied += copy_from_read_buf(tty, &b, &nr); + if (uncopied) { + retval = -EFAULT; + break; + } + } + + /* If there is enough space in the read buffer now, let the + * low-level driver know. We use n_tty_chars_in_buffer() to + * check the buffer, as it now knows about canonical mode. + * Otherwise, if the driver is throttled and the line is + * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode, + * we won't get any more characters. + */ + if (n_tty_chars_in_buffer(tty) <= TTY_THRESHOLD_UNTHROTTLE) + check_unthrottle(tty); + + if (b - buf >= minimum) + break; + if (time) + timeout = time; + } + clear_bit(TTY_DONT_FLIP, &tty->flags); + up(&tty->atomic_read); + remove_wait_queue(&tty->read_wait, &wait); + + if (!waitqueue_active(&tty->read_wait)) + tty->minimum_to_wake = minimum; + + __set_current_state(TASK_RUNNING); + size = b - buf; + if (size) { + retval = size; + if (nr) + clear_bit(TTY_PUSH, &tty->flags); + } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) + goto do_it_again; + + return retval; +} + +/** + * write_chan - write function for tty + * @tty: tty device + * @file: file object + * @buf: userspace buffer pointer + * @nr: size of I/O + * + * Write function of the terminal device. This is serialized with + * respect to other write callers but not to termios changes, reads + * and other such events. We must be careful with N_TTY as the receive + * code will echo characters, thus calling driver write methods. + * + * This code must be sure never to sleep through a hangup. + */ + +static ssize_t write_chan(struct tty_struct * tty, struct file * file, + const unsigned char * buf, size_t nr) +{ + const unsigned char *b = buf; + DECLARE_WAITQUEUE(wait, current); + int c; + ssize_t retval = 0; + + /* Job control check -- must be done at start (POSIX.1 7.1.1.4). */ + if (L_TOSTOP(tty) && file->f_op->write != redirected_tty_write) { + retval = tty_check_change(tty); + if (retval) + return retval; + } + + add_wait_queue(&tty->write_wait, &wait); + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + if (tty_hung_up_p(file) || (tty->link && !tty->link->count)) { + retval = -EIO; + break; + } + if (O_OPOST(tty) && !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) { + while (nr > 0) { + ssize_t num = opost_block(tty, b, nr); + if (num < 0) { + if (num == -EAGAIN) + break; + retval = num; + goto break_out; + } + b += num; + nr -= num; + if (nr == 0) + break; + c = *b; + if (opost(c, tty) < 0) + break; + b++; nr--; + } + if (tty->driver->flush_chars) + tty->driver->flush_chars(tty); + } else { + c = tty->driver->write(tty, b, nr); + if (c < 0) { + retval = c; + goto break_out; + } + b += c; + nr -= c; + } + if (!nr) + break; + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + break; + } + schedule(); + } +break_out: + __set_current_state(TASK_RUNNING); + remove_wait_queue(&tty->write_wait, &wait); + return (b - buf) ? b - buf : retval; +} + +/** + * normal_poll - poll method for N_TTY + * @tty: terminal device + * @file: file accessing it + * @wait: poll table + * + * Called when the line discipline is asked to poll() for data or + * for special events. This code is not serialized with respect to + * other events save open/close. + * + * This code must be sure never to sleep through a hangup. + * Called without the kernel lock held - fine + * + * FIXME: if someone changes the VMIN or discipline settings for the + * terminal while another process is in poll() the poll does not + * recompute the new limits. Possibly set_termios should issue + * a read wakeup to fix this bug. + */ + +static unsigned int normal_poll(struct tty_struct * tty, struct file * file, poll_table *wait) +{ + unsigned int mask = 0; + + poll_wait(file, &tty->read_wait, wait); + poll_wait(file, &tty->write_wait, wait); + if (input_available_p(tty, TIME_CHAR(tty) ? 0 : MIN_CHAR(tty))) + mask |= POLLIN | POLLRDNORM; + if (tty->packet && tty->link->ctrl_status) + mask |= POLLPRI | POLLIN | POLLRDNORM; + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) + mask |= POLLHUP; + if (tty_hung_up_p(file)) + mask |= POLLHUP; + if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) { + if (MIN_CHAR(tty) && !TIME_CHAR(tty)) + tty->minimum_to_wake = MIN_CHAR(tty); + else + tty->minimum_to_wake = 1; + } + if (tty->driver->chars_in_buffer(tty) < WAKEUP_CHARS && + tty->driver->write_room(tty) > 0) + mask |= POLLOUT | POLLWRNORM; + return mask; +} + +struct tty_ldisc tty_ldisc_N_TTY = { + TTY_LDISC_MAGIC, /* magic */ + "n_tty", /* name */ + 0, /* num */ + 0, /* flags */ + n_tty_open, /* open */ + n_tty_close, /* close */ + n_tty_flush_buffer, /* flush_buffer */ + n_tty_chars_in_buffer, /* chars_in_buffer */ + read_chan, /* read */ + write_chan, /* write */ + n_tty_ioctl, /* ioctl */ + n_tty_set_termios, /* set_termios */ + normal_poll, /* poll */ + NULL, /* hangup */ + n_tty_receive_buf, /* receive_buf */ + n_tty_receive_room, /* receive_room */ + n_tty_write_wakeup /* write_wakeup */ +}; + -- cgit v1.2.3