From da22a04f4727694e2c562ae4eb61daf77eef0427 Mon Sep 17 00:00:00 2001 From: Ben Levinsky Date: Mon, 14 Nov 2022 15:39:38 -0800 Subject: firmware: xilinx: Add shutdown/wakeup APIs Add shutdown/wakeup a resource eemi operations to shutdown or bringup a resource. Note alignment of args matches convention of other fn's in this file. The reason being that the long fn name results in aligned args that otherwise go over 80 chars so shift right to avoid this Signed-off-by: Ben Levinsky Signed-off-by: Tanmay Shah Acked-by: Michal Simek Link: https://lore.kernel.org/r/20221114233940.2096237-5-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier --- drivers/firmware/xilinx/zynqmp.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'drivers/firmware/xilinx/zynqmp.c') diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index ff5cabe70a2b..1865e43ed7e7 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -1159,6 +1159,41 @@ int zynqmp_pm_release_node(const u32 node) } EXPORT_SYMBOL_GPL(zynqmp_pm_release_node); +/** + * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to + * be powered down forcefully + * @node: Node ID of the targeted PU or subsystem + * @ack: Flag to specify whether acknowledge is requested + * + * Return: status, either success or error+reason + */ +int zynqmp_pm_force_pwrdwn(const u32 node, + const enum zynqmp_pm_request_ack ack) +{ + return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, node, ack, 0, 0, NULL); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_force_pwrdwn); + +/** + * zynqmp_pm_request_wake - PM call to wake up selected master or subsystem + * @node: Node ID of the master or subsystem + * @set_addr: Specifies whether the address argument is relevant + * @address: Address from which to resume when woken up + * @ack: Flag to specify whether acknowledge requested + * + * Return: status, either success or error+reason + */ +int zynqmp_pm_request_wake(const u32 node, + const bool set_addr, + const u64 address, + const enum zynqmp_pm_request_ack ack) +{ + /* set_addr flag is encoded into 1st bit of address */ + return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr, + address >> 32, ack, NULL); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_request_wake); + /** * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves * @node: Node ID of the slave -- cgit v1.2.3 From a5e56980cfb7ecaeb9a207c74e2e90ec544f0bc0 Mon Sep 17 00:00:00 2001 From: Ben Levinsky Date: Mon, 14 Nov 2022 15:39:39 -0800 Subject: firmware: xilinx: Add RPU configuration APIs This patch adds APIs to access to configure RPU and its processor-specific memory. That is query the run-time mode of RPU as either split or lockstep as well as API to set this mode. In addition add APIs to access configuration of the RPUs' tightly coupled memory (TCM). Signed-off-by: Ben Levinsky Signed-off-by: Tanmay Shah Acked-by: Michal Simek Link: https://lore.kernel.org/r/20221114233940.2096237-6-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier --- drivers/firmware/xilinx/zynqmp.c | 62 ++++++++++++++++++++++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 18 +++++++++++ 2 files changed, 80 insertions(+) (limited to 'drivers/firmware/xilinx/zynqmp.c') diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index 1865e43ed7e7..e4981e7f3500 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -1159,6 +1159,68 @@ int zynqmp_pm_release_node(const u32 node) } EXPORT_SYMBOL_GPL(zynqmp_pm_release_node); +/** + * zynqmp_pm_get_rpu_mode() - Get RPU mode + * @node_id: Node ID of the device + * @rpu_mode: return by reference value + * either split or lockstep + * + * Return: return 0 on success or error+reason. + * if success, then rpu_mode will be set + * to current rpu mode. + */ +int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + ret = zynqmp_pm_invoke_fn(PM_IOCTL, node_id, + IOCTL_GET_RPU_OPER_MODE, 0, 0, ret_payload); + + /* only set rpu_mode if no error */ + if (ret == XST_PM_SUCCESS) + *rpu_mode = ret_payload[0]; + + return ret; +} +EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_mode); + +/** + * zynqmp_pm_set_rpu_mode() - Set RPU mode + * @node_id: Node ID of the device + * @rpu_mode: Argument 1 to requested IOCTL call. either split or lockstep + * + * This function is used to set RPU mode to split or + * lockstep + * + * Return: Returns status, either success or error+reason + */ +int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode) +{ + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, + IOCTL_SET_RPU_OPER_MODE, (u32)rpu_mode, + 0, NULL); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_set_rpu_mode); + +/** + * zynqmp_pm_set_tcm_config - configure TCM + * @node_id: Firmware specific TCM subsystem ID + * @tcm_mode: Argument 1 to requested IOCTL call + * either PM_RPU_TCM_COMB or PM_RPU_TCM_SPLIT + * + * This function is used to set RPU mode to split or combined + * + * Return: status: 0 for success, else failure + */ +int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode) +{ + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, + IOCTL_TCM_COMB_CONFIG, (u32)tcm_mode, 0, + NULL); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_set_tcm_config); + /** * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to * be powered down forcefully diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index ad3f2bd0c470..cf92e739fa3b 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -530,6 +530,9 @@ int zynqmp_pm_request_wake(const u32 node, const bool set_addr, const u64 address, const enum zynqmp_pm_request_ack ack); +int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode); +int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1); +int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1); int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value); int zynqmp_pm_set_gem_config(u32 node, enum pm_gem_config_type config, u32 value); @@ -818,6 +821,21 @@ static inline int zynqmp_pm_request_wake(const u32 node, return -ENODEV; } +static inline int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1) +{ + return -ENODEV; +} + static inline int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value) -- cgit v1.2.3