From d533f0492b6371025a4f88506c7f1828a7a48e81 Mon Sep 17 00:00:00 2001 From: Jingchang Lu Date: Wed, 7 Aug 2013 17:05:36 +0800 Subject: i2c: imx: use struct representing i2c clk{div, val} pair using struct representing the i2c clk{div, val} pair would make the i2c_clk_div array more clear. Signed-off-by: Jingchang Lu Reviewed-by: Sascha Hauer Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index e24279725d36..9167d4332d77 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -30,6 +30,8 @@ * Copyright (C) 2007 RightHand Technologies, Inc. * Copyright (C) 2008 Darius Augulis * + * Copyright 2013 Freescale Semiconductor, Inc. + * */ /** Includes ******************************************************************* @@ -95,8 +97,12 @@ * * Duplicated divider values removed from list */ +struct imx_i2c_clk_pair { + u16 div; + u16 val; +}; -static u16 __initdata i2c_clk_div[50][2] = { +static struct imx_i2c_clk_pair __initdata i2c_clk_div[] = { { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 }, { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 }, { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 }, @@ -274,15 +280,15 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, /* Divider value calculation */ i2c_clk_rate = clk_get_rate(i2c_imx->clk); div = (i2c_clk_rate + rate - 1) / rate; - if (div < i2c_clk_div[0][0]) + if (div < i2c_clk_div[0].div) i = 0; - else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0]) + else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1].div) i = ARRAY_SIZE(i2c_clk_div) - 1; else - for (i = 0; i2c_clk_div[i][0] < div; i++); + for (i = 0; i2c_clk_div[i].div < div; i++); /* Store divider value */ - i2c_imx->ifdr = i2c_clk_div[i][1]; + i2c_imx->ifdr = i2c_clk_div[i].val; /* * There dummy delay is calculated. @@ -290,7 +296,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, * This delay is used in I2C bus disable function * to fix chip hardware bug. */ - i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0] + i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2); /* dev_dbg() can't be used, because adapter is not yet registered */ @@ -298,7 +304,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n", __func__, i2c_clk_rate, div); dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n", - __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]); + __func__, i2c_clk_div[i].val, i2c_clk_div[i].div); #endif } -- cgit v1.2.3