From 3ab7efe8e2cbcca2d401b43cfcc2fa9a7dac2299 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:58 +0100 Subject: ide: DMA reporting and validity checking fixes (take 3) * ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov Cc: Nick Warne Cc: Mark Lord Cc: Randy Dunlap Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/ide/ide-disk.c') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 00123d99527a..b77c849cdd28 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -961,11 +961,8 @@ static void idedisk_setup (ide_drive_t *drive) if (id->buf_size) printk (" w/%dKiB Cache", id->buf_size/2); - printk(", CHS=%d/%d/%d", - drive->bios_cyl, drive->bios_head, drive->bios_sect); - if (drive->using_dma) - ide_dma_verbose(drive); - printk("\n"); + printk(KERN_CONT ", CHS=%d/%d/%d\n", + drive->bios_cyl, drive->bios_head, drive->bios_sect); /* write cache enabled? */ if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) -- cgit v1.2.3 From fedda1e13125153d502e84856a2640acdb4c38f0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:32:00 +0100 Subject: ide: remove stale changelog from ide-disk.c Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 26 -------------------------- 1 file changed, 26 deletions(-) (limited to 'drivers/ide/ide-disk.c') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index b77c849cdd28..b1781908e1f2 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -13,32 +13,6 @@ * and Andre Hedrick * * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. - * - * Version 1.00 move disk only code from ide.c to ide-disk.c - * support optional byte-swapping of all data - * Version 1.01 fix previous byte-swapping code - * Version 1.02 remove ", LBA" from drive identification msgs - * Version 1.03 fix display of id->buf_size for big-endian - * Version 1.04 add /proc configurable settings and S.M.A.R.T support - * Version 1.05 add capacity support for ATA3 >= 8GB - * Version 1.06 get boot-up messages to show full cyl count - * Version 1.07 disable door-locking if it fails - * Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB, - * process of adding new ATA4 compliance. - * fixed problems in allowing fdisk to see - * the entire disk. - * Version 1.09 added increment of rq->sector in ide_multwrite - * added UDMA 3/4 reporting - * Version 1.10 request queue changes, Ultra DMA 100 - * Version 1.11 added 48-bit lba - * Version 1.12 adding taskfile io access method - * Version 1.13 added standby and flush-cache for notifier - * Version 1.14 added acoustic-wcache - * Version 1.15 convert all calls to ide_raw_taskfile - * since args will return register content. - * Version 1.16 added suspend-resume-checkpower - * Version 1.17 do flush on standby, do flush on ATA < ATA6 - * fix wcache setup. */ #define IDEDISK_VERSION "1.18" -- cgit v1.2.3