From 10c0b3437c4dc0d14ac254bbe71e54ea5f238d97 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Fri, 1 May 2009 20:29:53 +0200
Subject: ide-tape: fix potential fs requests bug

ide-tape had a potential bug for fs requests when preparing the command
packet: it was writing the transfer length as a number of fixed blocks.
However, the block layer implies 512 byte blocks and ide-tape can have
other block sizes so account for that too.

ide-floppy does this calculation properly with the block size factor
(floppy->bs_factor).

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index e16604562f28..fc79cf4812f3 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -586,7 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 				   struct ide_atapi_pc *pc, struct request *rq,
 				   u8 opcode)
 {
-	unsigned int length = blk_rq_sectors(rq);
+	unsigned int length = blk_rq_sectors(rq) / (tape->blk_size >> 9);
 
 	ide_init_pc(pc);
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
-- 
cgit v1.2.3


From dfb7e621fa12c0579e88560ab176c5768f9e0bfb Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Fri, 1 May 2009 20:35:21 +0200
Subject: ide-atapi: switch to blk_rq_bytes() on do_request() path

After the recent struct request cleanups, blk_rq_bytes() is guaranteed
to be valid and is the current total length of the rq's bio. Use that
instead of pc->req_xfer in the do_request() path after the command has
been queued

The remaining usage of pc->req_xfer now is only until we map the rq to a
bio.

While at it:

- remove local caching of rq completion length in ide_tape_issue_pc()

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c  | 12 +++++++-----
 drivers/ide/ide-floppy.c |  8 ++++----
 drivers/ide/ide-tape.c   | 14 +++++++-------
 3 files changed, 18 insertions(+), 16 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8a894fa37b53..7129495b3e40 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -370,7 +370,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 						     ? "write" : "read");
 			pc->flags |= PC_FLAG_DMA_ERROR;
 		} else
-			pc->xferred = pc->req_xfer;
+			pc->xferred = blk_rq_bytes(rq);
 		debug_log("%s: DMA finished\n", drive->name);
 	}
 
@@ -627,7 +627,7 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
 	ide_hwif_t *hwif = drive->hwif;
 	ide_expiry_t *expiry = NULL;
 	struct request *rq = hwif->rq;
-	unsigned int timeout;
+	unsigned int timeout, bytes;
 	u16 bcount;
 	u8 valid_tf;
 	u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT);
@@ -647,9 +647,11 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
 		pc->xferred = 0;
 
 		valid_tf = IDE_VALID_DEVICE;
-		bcount = ((drive->media == ide_tape) ?
-				pc->req_xfer :
-				min(pc->req_xfer, 63 * 1024));
+		bytes = blk_rq_bytes(rq);
+
+		bcount = ((drive->media == ide_tape) ? bytes
+						     : min_t(unsigned int,
+							     bytes, 63 * 1024));
 
 		if (pc->flags & PC_FLAG_DMA_ERROR) {
 			pc->flags &= ~PC_FLAG_DMA_ERROR;
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 650981758f15..a1c55985d4ae 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -210,7 +210,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
 	if (rq->cmd_flags & REQ_RW)
 		pc->flags |= PC_FLAG_WRITING;
 	pc->buf = NULL;
-	pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
+	pc->buf_size = blk_rq_bytes(rq);
 	pc->flags |= PC_FLAG_DMA_OK;
 }
 
@@ -227,7 +227,7 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
 	}
 	/* pio will be performed by ide_pio_bytes() which handles sg fine */
 	pc->buf = NULL;
-	pc->req_xfer = pc->buf_size = blk_rq_bytes(rq);
+	pc->buf_size = blk_rq_bytes(rq);
 }
 
 static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
@@ -286,8 +286,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
 
 	cmd.rq = rq;
 
-	if (blk_fs_request(rq) || pc->req_xfer) {
-		ide_init_sg_cmd(&cmd, pc->req_xfer);
+	if (blk_fs_request(rq) || blk_rq_bytes(rq)) {
+		ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
 		ide_map_sg(drive, &cmd);
 	}
 
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index fc79cf4812f3..aaeef12f80ad 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -292,6 +292,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc *pc = drive->failed_pc;
+	struct request *rq = drive->hwif->rq;
 
 	tape->sense_key = sense[2] & 0xF;
 	tape->asc       = sense[12];
@@ -302,7 +303,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 
 	/* Correct pc->xferred by asking the tape.	 */
 	if (pc->flags & PC_FLAG_DMA_ERROR)
-		pc->xferred = pc->req_xfer -
+		pc->xferred = blk_rq_bytes(rq) -
 			tape->blk_size *
 			get_unaligned_be32(&sense[3]);
 
@@ -484,6 +485,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 					 struct ide_atapi_pc *pc)
 {
 	idetape_tape_t *tape = drive->driver_data;
+	struct request *rq = drive->hwif->rq;
 
 	if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
 		drive->failed_pc = pc;
@@ -493,7 +495,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 
 	if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
 		(pc->flags & PC_FLAG_ABORT)) {
-		unsigned int done = blk_rq_bytes(drive->hwif->rq);
 
 		/*
 		 * We will "abort" retrying a packet command in case legitimate
@@ -517,7 +518,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
 
 		drive->failed_pc = NULL;
 		drive->pc_callback(drive, 0);
-		ide_complete_rq(drive, -EIO, done);
+		ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
 		return ide_stopped;
 	}
 	debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
@@ -592,9 +593,8 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
 	pc->buf = NULL;
-	pc->buf_size = length * tape->blk_size;
-	pc->req_xfer = pc->buf_size;
-	if (pc->req_xfer == tape->buffer_size)
+	pc->buf_size = blk_rq_bytes(rq);
+	if (pc->buf_size == tape->buffer_size)
 		pc->flags |= PC_FLAG_DMA_OK;
 
 	if (opcode == READ_6)
@@ -718,7 +718,7 @@ out:
 
 	cmd.rq = rq;
 
-	ide_init_sg_cmd(&cmd, pc->req_xfer);
+	ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
 	ide_map_sg(drive, &cmd);
 
 	return ide_tape_issue_pc(drive, &cmd, pc);
-- 
cgit v1.2.3


From 077e6dba20e74a455a0452379d2a965c7e1b01ad Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Fri, 1 May 2009 21:21:02 +0200
Subject: ide-atapi: switch to rq->resid_len

Now that we have rq->resid_len, use it to account partial completion
amount during the lifetime of an rq, decrementing it on each successful
transfer. As a result, get rid of now unused pc->xferred.

While at it, remove noisy debug call in ide_prep_sense.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c | 19 ++++++++-----------
 drivers/ide/ide-tape.c  | 12 +++++-------
 include/linux/ide.h     |  2 --
 3 files changed, 13 insertions(+), 20 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 7129495b3e40..1022e421abd8 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -172,8 +172,6 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
 	unsigned int cmd_len, sense_len;
 	int err;
 
-	debug_log("%s: enter\n", __func__);
-
 	switch (drive->media) {
 	case ide_floppy:
 		cmd_len = 255;
@@ -370,7 +368,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 						     ? "write" : "read");
 			pc->flags |= PC_FLAG_DMA_ERROR;
 		} else
-			pc->xferred = blk_rq_bytes(rq);
+			rq->resid_len = 0;
 		debug_log("%s: DMA finished\n", drive->name);
 	}
 
@@ -379,7 +377,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 		int uptodate, error;
 
 		debug_log("Packet command completed, %d bytes transferred\n",
-			  pc->xferred);
+			  blk_rq_bytes(rq));
 
 		pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
 
@@ -467,15 +465,15 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 	ide_pio_bytes(drive, cmd, write, done);
 
 	/* Update transferred byte count */
-	pc->xferred += done;
+	rq->resid_len -= done;
 
 	bcount -= done;
 
 	if (bcount)
 		ide_pad_transfer(drive, write, bcount);
 
-	debug_log("[cmd %x] transferred %d bytes, padded %d bytes\n",
-		  rq->cmd[0], done, bcount);
+	debug_log("[cmd %x] transferred %d bytes, padded %d bytes, resid: %u\n",
+		  rq->cmd[0], done, bcount, rq->resid_len);
 
 	/* And set the interrupt handler again */
 	ide_set_handler(drive, ide_pc_intr, timeout);
@@ -643,16 +641,15 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
 	} else {
 		pc = drive->pc;
 
-		/* We haven't transferred any data yet */
-		pc->xferred = 0;
-
 		valid_tf = IDE_VALID_DEVICE;
 		bytes = blk_rq_bytes(rq);
-
 		bcount = ((drive->media == ide_tape) ? bytes
 						     : min_t(unsigned int,
 							     bytes, 63 * 1024));
 
+		/* We haven't transferred any data yet */
+		rq->resid_len = bcount;
+
 		if (pc->flags & PC_FLAG_DMA_ERROR) {
 			pc->flags &= ~PC_FLAG_DMA_ERROR;
 			ide_dma_off(drive);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index aaeef12f80ad..c93370997972 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -301,11 +301,9 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 	debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
 		 pc->c[0], tape->sense_key, tape->asc, tape->ascq);
 
-	/* Correct pc->xferred by asking the tape.	 */
+	/* correct remaining bytes to transfer */
 	if (pc->flags & PC_FLAG_DMA_ERROR)
-		pc->xferred = blk_rq_bytes(rq) -
-			tape->blk_size *
-			get_unaligned_be32(&sense[3]);
+		rq->resid_len = tape->blk_size * get_unaligned_be32(&sense[3]);
 
 	/*
 	 * If error was the result of a zero-length read or write command,
@@ -339,7 +337,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
 			pc->flags |= PC_FLAG_ABORT;
 		}
 		if (!(pc->flags & PC_FLAG_ABORT) &&
-		    pc->xferred)
+		    (blk_rq_bytes(rq) - rq->resid_len))
 			pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
 	}
 }
@@ -369,7 +367,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 			printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
 					"itself - Aborting request!\n");
 	} else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
-		int blocks = pc->xferred / tape->blk_size;
+		unsigned int blocks =
+			(blk_rq_bytes(rq) - rq->resid_len) / tape->blk_size;
 
 		tape->avg_size += blocks * tape->blk_size;
 
@@ -381,7 +380,6 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 		}
 
 		tape->first_frame += blocks;
-		rq->resid_len = blk_rq_bytes(rq) - blocks * tape->blk_size;
 
 		if (pc->error) {
 			uptodate = 0;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 34c128f0a33c..745a393af278 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -357,8 +357,6 @@ struct ide_atapi_pc {
 
 	/* bytes to transfer */
 	int req_xfer;
-	/* bytes actually transferred */
-	int xferred;
 
 	/* data buffer */
 	u8 *buf;
-- 
cgit v1.2.3


From 5a0e43b5e2ee9a295f864c38f0e853b1a4fc3892 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Fri, 1 May 2009 23:27:11 +0200
Subject: ide-atapi: add a len-parameter to ide_queue_pc_tail

This is in preparation for removing ide_atapi_pc.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c        | 12 ++++++------
 drivers/ide/ide-floppy.c       |  4 ++--
 drivers/ide/ide-floppy_ioctl.c |  8 ++++----
 drivers/ide/ide-tape.c         | 26 +++++++++++++-------------
 include/linux/ide.h            |  3 ++-
 5 files changed, 27 insertions(+), 26 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 1022e421abd8..0d4da2c1adc1 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(ide_init_pc);
  * and wait for it to be serviced.
  */
 int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
-		      struct ide_atapi_pc *pc)
+		      struct ide_atapi_pc *pc, unsigned int bufflen)
 {
 	struct request *rq;
 	int error;
@@ -93,8 +93,8 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->special = (char *)pc;
 
-	if (pc->req_xfer) {
-		error = blk_rq_map_kern(drive->queue, rq, pc->buf, pc->req_xfer,
+	if (bufflen) {
+		error = blk_rq_map_kern(drive->queue, rq, pc->buf, bufflen,
 					GFP_NOIO);
 		if (error)
 			goto put_req;
@@ -117,7 +117,7 @@ int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk)
 	ide_init_pc(&pc);
 	pc.c[0] = TEST_UNIT_READY;
 
-	return ide_queue_pc_tail(drive, disk, &pc);
+	return ide_queue_pc_tail(drive, disk, &pc, 0);
 }
 EXPORT_SYMBOL_GPL(ide_do_test_unit_ready);
 
@@ -132,7 +132,7 @@ int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start)
 	if (drive->media == ide_tape)
 		pc.flags |= PC_FLAG_WAIT_FOR_DSC;
 
-	return ide_queue_pc_tail(drive, disk, &pc);
+	return ide_queue_pc_tail(drive, disk, &pc, 0);
 }
 EXPORT_SYMBOL_GPL(ide_do_start_stop);
 
@@ -147,7 +147,7 @@ int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
 	pc.c[0] = ALLOW_MEDIUM_REMOVAL;
 	pc.c[4] = on;
 
-	return ide_queue_pc_tail(drive, disk, &pc);
+	return ide_queue_pc_tail(drive, disk, &pc, 0);
 }
 EXPORT_SYMBOL_GPL(ide_set_media_lock);
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index a1c55985d4ae..5df00d4ab8da 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -318,7 +318,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
 
 	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
 
-	if (ide_queue_pc_tail(drive, disk, pc)) {
+	if (ide_queue_pc_tail(drive, disk, pc, pc->req_xfer)) {
 		printk(KERN_ERR PFX "Can't get flexible disk page params\n");
 		return 1;
 	}
@@ -390,7 +390,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 	pc.buf = &pc_buf[0];
 	pc.buf_size = sizeof(pc_buf);
 
-	if (ide_queue_pc_tail(drive, disk, &pc)) {
+	if (ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer)) {
 		printk(KERN_ERR PFX "Can't get floppy parameters\n");
 		return 1;
 	}
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index cd8a42027ede..75f1d50276a4 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -50,7 +50,7 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive,
 	pc->buf = &pc_buf[0];
 	pc->buf_size = sizeof(pc_buf);
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc)) {
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer)) {
 		printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
 		return -EIO;
 	}
@@ -124,7 +124,7 @@ static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
 	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
 	pc->flags |= PC_FLAG_SUPPRESS_ERROR;
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer))
 		return 1;
 
 	if (pc->buf[8 + 2] & 0x40)
@@ -172,7 +172,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	ide_floppy_get_sfrp_bit(drive, pc);
 	ide_floppy_create_format_unit_cmd(pc, blocks, length, flags);
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer))
 		err = -EIO;
 
 out:
@@ -200,7 +200,7 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive,
 
 	if (drive->atapi_flags & IDE_AFLAG_SRFP) {
 		ide_create_request_sense_cmd(drive, pc);
-		if (ide_queue_pc_tail(drive, floppy->disk, pc))
+		if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer))
 			return -EIO;
 
 		if (floppy->sense_key == 2 &&
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index c93370997972..f09a263b72f2 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -770,7 +770,7 @@ static int idetape_flush_tape_buffers(ide_drive_t *drive)
 	int rc;
 
 	idetape_create_write_filemark_cmd(drive, &pc, 0);
-	rc = ide_queue_pc_tail(drive, tape->disk, &pc);
+	rc = ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer);
 	if (rc)
 		return rc;
 	idetape_wait_ready(drive, 60 * 5 * HZ);
@@ -793,7 +793,7 @@ static int idetape_read_position(ide_drive_t *drive)
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	idetape_create_read_position_cmd(&pc);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc))
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer))
 		return -1;
 	position = tape->first_frame;
 	return position;
@@ -846,12 +846,12 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
 		__ide_tape_discard_merge_buffer(drive);
 	idetape_wait_ready(drive, 60 * 5 * HZ);
 	idetape_create_locate_cmd(drive, &pc, block, partition, skip);
-	retval = ide_queue_pc_tail(drive, disk, &pc);
+	retval = ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
 	if (retval)
 		return (retval);
 
 	idetape_create_read_position_cmd(&pc);
-	return ide_queue_pc_tail(drive, disk, &pc);
+	return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
 }
 
 static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
@@ -1047,12 +1047,12 @@ static int idetape_rewind_tape(ide_drive_t *drive)
 	debug_log(DBG_SENSE, "Enter %s\n", __func__);
 
 	idetape_create_rewind_cmd(drive, &pc);
-	retval = ide_queue_pc_tail(drive, disk, &pc);
+	retval = ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
 	if (retval)
 		return retval;
 
 	idetape_create_read_position_cmd(&pc);
-	retval = ide_queue_pc_tail(drive, disk, &pc);
+	retval = ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
 	if (retval)
 		return retval;
 	return 0;
@@ -1120,7 +1120,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
 	case MTBSF:
 		idetape_create_space_cmd(&pc, mt_count - count,
 					 IDETAPE_SPACE_OVER_FILEMARK);
-		return ide_queue_pc_tail(drive, disk, &pc);
+		return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
 	case MTFSFM:
 	case MTBSFM:
 		if (!sprev)
@@ -1259,7 +1259,7 @@ static int idetape_write_filemark(ide_drive_t *drive)
 
 	/* Write a filemark */
 	idetape_create_write_filemark_cmd(drive, &pc, 1);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
 		return -EIO;
 	}
@@ -1344,11 +1344,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
 	case MTEOM:
 		idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
-		return ide_queue_pc_tail(drive, disk, &pc);
+		return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
 	case MTERASE:
 		(void)idetape_rewind_tape(drive);
 		idetape_create_erase_cmd(&pc);
-		return ide_queue_pc_tail(drive, disk, &pc);
+		return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
 	case MTSETBLK:
 		if (mt_count) {
 			if (mt_count < tape->blk_size ||
@@ -1457,7 +1457,7 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
 	struct ide_atapi_pc pc;
 
 	idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
 		if (tape->blk_size == 0) {
 			printk(KERN_WARNING "ide-tape: Cannot deal with zero "
@@ -1613,7 +1613,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
 	pc.buf = &pc_buf[0];
 	pc.buf_size = sizeof(pc_buf);
 
-	if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
 				tape->name);
 		return;
@@ -1642,7 +1642,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
 	u8 speed, max_speed;
 
 	idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
 				" some default values\n");
 		tape->blk_size = 512;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 745a393af278..7e15bd1eaae9 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1160,7 +1160,8 @@ enum {
 	REQ_IDETAPE_WRITE	= (1 << 3),
 };
 
-int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *);
+int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
+		      unsigned int);
 
 int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
-- 
cgit v1.2.3


From b13345f39dadbabdabaf8819cf6df26913da9e8d Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sat, 2 May 2009 10:26:12 +0200
Subject: ide-atapi: add a buffer-arg to ide_queue_pc_tail

This is in preparation of removing ide_atapi_pc. Expose the buffer as an
argument to ide_queue_pc_tail with later replacing it with local buffer
or even kmalloc'ed one if needed due to stack usage constraints.

Also, add the possibility of passing a NULL-ptr buffer for cmds which
don't transfer data besides the cdb. While at it, switch to local buffer
in idetape_get_mode_sense_results().

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c        | 12 ++++++------
 drivers/ide/ide-floppy.c       | 17 ++++++++---------
 drivers/ide/ide-floppy_ioctl.c | 16 ++++++++--------
 drivers/ide/ide-tape.c         | 37 ++++++++++++++++++-------------------
 include/linux/ide.h            |  2 +-
 5 files changed, 41 insertions(+), 43 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 0d4da2c1adc1..b12be1f17f14 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(ide_init_pc);
  * and wait for it to be serviced.
  */
 int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
-		      struct ide_atapi_pc *pc, unsigned int bufflen)
+		      struct ide_atapi_pc *pc, void *buf, unsigned int bufflen)
 {
 	struct request *rq;
 	int error;
@@ -93,8 +93,8 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
 	rq->cmd_type = REQ_TYPE_SPECIAL;
 	rq->special = (char *)pc;
 
-	if (bufflen) {
-		error = blk_rq_map_kern(drive->queue, rq, pc->buf, bufflen,
+	if (buf && bufflen) {
+		error = blk_rq_map_kern(drive->queue, rq, buf, bufflen,
 					GFP_NOIO);
 		if (error)
 			goto put_req;
@@ -117,7 +117,7 @@ int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk)
 	ide_init_pc(&pc);
 	pc.c[0] = TEST_UNIT_READY;
 
-	return ide_queue_pc_tail(drive, disk, &pc, 0);
+	return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 }
 EXPORT_SYMBOL_GPL(ide_do_test_unit_ready);
 
@@ -132,7 +132,7 @@ int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start)
 	if (drive->media == ide_tape)
 		pc.flags |= PC_FLAG_WAIT_FOR_DSC;
 
-	return ide_queue_pc_tail(drive, disk, &pc, 0);
+	return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 }
 EXPORT_SYMBOL_GPL(ide_do_start_stop);
 
@@ -147,7 +147,7 @@ int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
 	pc.c[0] = ALLOW_MEDIUM_REMOVAL;
 	pc.c[4] = on;
 
-	return ide_queue_pc_tail(drive, disk, &pc, 0);
+	return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 }
 EXPORT_SYMBOL_GPL(ide_set_media_lock);
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 5df00d4ab8da..be21cf23f8cb 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -318,7 +318,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
 
 	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
 
-	if (ide_queue_pc_tail(drive, disk, pc, pc->req_xfer)) {
+	if (ide_queue_pc_tail(drive, disk, pc, pc->buf, pc->req_xfer)) {
 		printk(KERN_ERR PFX "Can't get flexible disk page params\n");
 		return 1;
 	}
@@ -387,22 +387,21 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 	drive->capacity64 = 0;
 
 	ide_floppy_create_read_capacity_cmd(&pc);
-	pc.buf = &pc_buf[0];
 	pc.buf_size = sizeof(pc_buf);
 
-	if (ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer)) {
+	if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) {
 		printk(KERN_ERR PFX "Can't get floppy parameters\n");
 		return 1;
 	}
-	header_len = pc.buf[3];
-	cap_desc = &pc.buf[4];
+	header_len = pc_buf[3];
+	cap_desc = &pc_buf[4];
 	desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
 
 	for (i = 0; i < desc_cnt; i++) {
 		unsigned int desc_start = 4 + i*8;
 
-		blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
-		length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
+		blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
+		length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
 
 		ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
 					     "%d sector size",
@@ -415,7 +414,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 		 * the code below is valid only for the 1st descriptor, ie i=0
 		 */
 
-		switch (pc.buf[desc_start + 4] & 0x03) {
+		switch (pc_buf[desc_start + 4] & 0x03) {
 		/* Clik! drive returns this instead of CAPACITY_CURRENT */
 		case CAPACITY_UNFORMATTED:
 			if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
@@ -464,7 +463,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 			break;
 		}
 		ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d",
-					     pc.buf[desc_start + 4] & 0x03);
+					     pc_buf[desc_start + 4] & 0x03);
 	}
 
 	/* Clik! disk does not support get_flexible_disk_page */
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 75f1d50276a4..9c2518d7514d 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -47,15 +47,14 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive,
 		return -EINVAL;
 
 	ide_floppy_create_read_capacity_cmd(pc);
-	pc->buf = &pc_buf[0];
 	pc->buf_size = sizeof(pc_buf);
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer)) {
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc_buf, pc->req_xfer)) {
 		printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
 		return -EIO;
 	}
 
-	header_len = pc->buf[3];
+	header_len = pc_buf[3];
 	desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
 
 	u_index = 0;
@@ -72,8 +71,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive,
 		if (u_index >= u_array_size)
 			break;	/* User-supplied buffer too small */
 
-		blocks = be32_to_cpup((__be32 *)&pc->buf[desc_start]);
-		length = be16_to_cpup((__be16 *)&pc->buf[desc_start + 6]);
+		blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
+		length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
 
 		if (put_user(blocks, argp))
 			return -EFAULT;
@@ -124,7 +123,7 @@ static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
 	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
 	pc->flags |= PC_FLAG_SUPPRESS_ERROR;
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->buf, pc->req_xfer))
 		return 1;
 
 	if (pc->buf[8 + 2] & 0x40)
@@ -172,7 +171,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	ide_floppy_get_sfrp_bit(drive, pc);
 	ide_floppy_create_format_unit_cmd(pc, blocks, length, flags);
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->buf, pc->req_xfer))
 		err = -EIO;
 
 out:
@@ -200,7 +199,8 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive,
 
 	if (drive->atapi_flags & IDE_AFLAG_SRFP) {
 		ide_create_request_sense_cmd(drive, pc);
-		if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->req_xfer))
+		if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->buf,
+				      pc->req_xfer))
 			return -EIO;
 
 		if (floppy->sense_key == 2 &&
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index f09a263b72f2..1f7f50473a4f 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -770,7 +770,7 @@ static int idetape_flush_tape_buffers(ide_drive_t *drive)
 	int rc;
 
 	idetape_create_write_filemark_cmd(drive, &pc, 0);
-	rc = ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer);
+	rc = ide_queue_pc_tail(drive, tape->disk, &pc, NULL, 0);
 	if (rc)
 		return rc;
 	idetape_wait_ready(drive, 60 * 5 * HZ);
@@ -793,7 +793,7 @@ static int idetape_read_position(ide_drive_t *drive)
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
 	idetape_create_read_position_cmd(&pc);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer))
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.buf, pc.req_xfer))
 		return -1;
 	position = tape->first_frame;
 	return position;
@@ -846,12 +846,12 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
 		__ide_tape_discard_merge_buffer(drive);
 	idetape_wait_ready(drive, 60 * 5 * HZ);
 	idetape_create_locate_cmd(drive, &pc, block, partition, skip);
-	retval = ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
+	retval = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 	if (retval)
 		return (retval);
 
 	idetape_create_read_position_cmd(&pc);
-	return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
+	return ide_queue_pc_tail(drive, disk, &pc, pc.buf, pc.req_xfer);
 }
 
 static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
@@ -1047,12 +1047,12 @@ static int idetape_rewind_tape(ide_drive_t *drive)
 	debug_log(DBG_SENSE, "Enter %s\n", __func__);
 
 	idetape_create_rewind_cmd(drive, &pc);
-	retval = ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
+	retval = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 	if (retval)
 		return retval;
 
 	idetape_create_read_position_cmd(&pc);
-	retval = ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
+	retval = ide_queue_pc_tail(drive, disk, &pc, pc.buf, pc.req_xfer);
 	if (retval)
 		return retval;
 	return 0;
@@ -1120,7 +1120,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
 	case MTBSF:
 		idetape_create_space_cmd(&pc, mt_count - count,
 					 IDETAPE_SPACE_OVER_FILEMARK);
-		return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
+		return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 	case MTFSFM:
 	case MTBSFM:
 		if (!sprev)
@@ -1259,7 +1259,7 @@ static int idetape_write_filemark(ide_drive_t *drive)
 
 	/* Write a filemark */
 	idetape_create_write_filemark_cmd(drive, &pc, 1);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, NULL, 0)) {
 		printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
 		return -EIO;
 	}
@@ -1344,11 +1344,11 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
 			IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
 	case MTEOM:
 		idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
-		return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
+		return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 	case MTERASE:
 		(void)idetape_rewind_tape(drive);
 		idetape_create_erase_cmd(&pc);
-		return ide_queue_pc_tail(drive, disk, &pc, pc.req_xfer);
+		return ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
 	case MTSETBLK:
 		if (mt_count) {
 			if (mt_count < tape->blk_size ||
@@ -1457,7 +1457,7 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
 	struct ide_atapi_pc pc;
 
 	idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.buf, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
 		if (tape->blk_size == 0) {
 			printk(KERN_WARNING "ide-tape: Cannot deal with zero "
@@ -1610,17 +1610,16 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
 	char fw_rev[4], vendor_id[8], product_id[16];
 
 	idetape_create_inquiry_cmd(&pc);
-	pc.buf = &pc_buf[0];
 	pc.buf_size = sizeof(pc_buf);
 
-	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc_buf, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
 				tape->name);
 		return;
 	}
-	memcpy(vendor_id, &pc.buf[8], 8);
-	memcpy(product_id, &pc.buf[16], 16);
-	memcpy(fw_rev, &pc.buf[32], 4);
+	memcpy(vendor_id, &pc_buf[8], 8);
+	memcpy(product_id, &pc_buf[16], 16);
+	memcpy(fw_rev, &pc_buf[32], 4);
 
 	ide_fixstring(vendor_id, 8, 0);
 	ide_fixstring(product_id, 16, 0);
@@ -1638,11 +1637,11 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc pc;
-	u8 *caps;
+	u8 buf[24], *caps;
 	u8 speed, max_speed;
 
 	idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.req_xfer)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
 				" some default values\n");
 		tape->blk_size = 512;
@@ -1651,7 +1650,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
 		put_unaligned(6*52, (u16 *)&tape->caps[16]);
 		return;
 	}
-	caps = pc.buf + 4 + pc.buf[3];
+	caps = buf + 4 + buf[3];
 
 	/* convert to host order and save for later use */
 	speed = be16_to_cpup((__be16 *)&caps[14]);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 7e15bd1eaae9..4cd7157a403f 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1161,7 +1161,7 @@ enum {
 };
 
 int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
-		      unsigned int);
+		      void *, unsigned int);
 
 int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
-- 
cgit v1.2.3


From d9a683076412924ca03c8b6cb766964425cf822e Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sat, 2 May 2009 10:43:11 +0200
Subject: ide-floppy/ide_floppy_get_flexible_disk_page: use local buffer

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-floppy.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index be21cf23f8cb..060c893820c3 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -311,33 +311,33 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
 	struct gendisk *disk = floppy->disk;
-	u8 *page;
+	u8 *page, buf[40];
 	int capacity, lba_capacity;
 	u16 transfer_rate, sector_size, cyls, rpm;
 	u8 heads, sectors;
 
 	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
 
-	if (ide_queue_pc_tail(drive, disk, pc, pc->buf, pc->req_xfer)) {
+	if (ide_queue_pc_tail(drive, disk, pc, buf, pc->req_xfer)) {
 		printk(KERN_ERR PFX "Can't get flexible disk page params\n");
 		return 1;
 	}
 
-	if (pc->buf[3] & 0x80)
+	if (buf[3] & 0x80)
 		drive->dev_flags |= IDE_DFLAG_WP;
 	else
 		drive->dev_flags &= ~IDE_DFLAG_WP;
 
 	set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
 
-	page = &pc->buf[8];
+	page = &buf[8];
 
-	transfer_rate = be16_to_cpup((__be16 *)&pc->buf[8 + 2]);
-	sector_size   = be16_to_cpup((__be16 *)&pc->buf[8 + 6]);
-	cyls          = be16_to_cpup((__be16 *)&pc->buf[8 + 8]);
-	rpm           = be16_to_cpup((__be16 *)&pc->buf[8 + 28]);
-	heads         = pc->buf[8 + 4];
-	sectors       = pc->buf[8 + 5];
+	transfer_rate = be16_to_cpup((__be16 *)&buf[8 + 2]);
+	sector_size   = be16_to_cpup((__be16 *)&buf[8 + 6]);
+	cyls          = be16_to_cpup((__be16 *)&buf[8 + 8]);
+	rpm           = be16_to_cpup((__be16 *)&buf[8 + 28]);
+	heads         = buf[8 + 4];
+	sectors       = buf[8 + 5];
 
 	capacity = cyls * heads * sectors * sector_size;
 
-- 
cgit v1.2.3


From 802e663427b16c77368a4fb2f77c105fbfffd68c Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sat, 2 May 2009 10:45:17 +0200
Subject: ide-floppy/ide_floppy_get_sfrp_bit: use local buffer

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-floppy_ioctl.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 9c2518d7514d..0d2c9f0368da 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -117,16 +117,17 @@ static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
 static int ide_floppy_get_sfrp_bit(ide_drive_t *drive, struct ide_atapi_pc *pc)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
+	u8 buf[20];
 
 	drive->atapi_flags &= ~IDE_AFLAG_SRFP;
 
 	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_CAPABILITIES_PAGE);
 	pc->flags |= PC_FLAG_SUPPRESS_ERROR;
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->buf, pc->req_xfer))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, buf, pc->req_xfer))
 		return 1;
 
-	if (pc->buf[8 + 2] & 0x40)
+	if (buf[8 + 2] & 0x40)
 		drive->atapi_flags |= IDE_AFLAG_SRFP;
 
 	return 0;
-- 
cgit v1.2.3


From 5122e5174f872c9f3120c8aff71c448f84b6f038 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sat, 2 May 2009 10:53:10 +0200
Subject: ide-floppy/ide_floppy_format_unit: use local buffer

Pass the buffer into ide_floppy_create_format_unit_cmd instead of using
pc->buf.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-floppy_ioctl.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 0d2c9f0368da..7a03d34bc240 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -93,24 +93,25 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive,
 	return 0;
 }
 
-static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
-		int l, int flags)
+static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc,
+					      u8 *buf, int b, int l,
+					      int flags)
 {
 	ide_init_pc(pc);
 	pc->c[0] = GPCMD_FORMAT_UNIT;
 	pc->c[1] = 0x17;
 
-	memset(pc->buf, 0, 12);
-	pc->buf[1] = 0xA2;
+	memset(buf, 0, 12);
+	buf[1] = 0xA2;
 	/* Default format list header, u8 1: FOV/DCRT/IMM bits set */
 
 	if (flags & 1)				/* Verify bit on... */
-		pc->buf[1] ^= 0x20;		/* ... turn off DCRT bit */
-	pc->buf[3] = 8;
+		buf[1] ^= 0x20;			/* ... turn off DCRT bit */
+	buf[3] = 8;
 
-	put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
-	put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
-	pc->buf_size = 12;
+	put_unaligned(cpu_to_be32(b), (unsigned int *)(&buf[4]));
+	put_unaligned(cpu_to_be32(l), (unsigned int *)(&buf[8]));
+	pc->req_xfer = 12;
 	pc->flags |= PC_FLAG_WRITING;
 }
 
@@ -137,6 +138,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
 				  int __user *arg)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
+	u8 buf[12];
 	int blocks, length, flags, err = 0;
 
 	if (floppy->openers > 1) {
@@ -170,9 +172,9 @@ static int ide_floppy_format_unit(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	}
 
 	ide_floppy_get_sfrp_bit(drive, pc);
-	ide_floppy_create_format_unit_cmd(pc, blocks, length, flags);
+	ide_floppy_create_format_unit_cmd(pc, buf, blocks, length, flags);
 
-	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->buf, pc->req_xfer))
+	if (ide_queue_pc_tail(drive, floppy->disk, pc, buf, pc->req_xfer))
 		err = -EIO;
 
 out:
-- 
cgit v1.2.3


From ae3a8387be529e632eac69b342524c25b892fc63 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sat, 2 May 2009 10:58:17 +0200
Subject: ide-atapi: use local sense buffer

Access the sense buffer through the bio in ->pc_callback method thus
alleviating the need for the pc->buf pointer.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c  | 4 +++-
 drivers/ide/ide-floppy.c | 3 ++-
 drivers/ide/ide-tape.c   | 5 +++--
 3 files changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index b12be1f17f14..66ea1e7774fd 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -253,7 +253,9 @@ void ide_retry_pc(ide_drive_t *drive)
 	/* init pc from sense_rq */
 	ide_init_pc(pc);
 	memcpy(pc->c, sense_rq->cmd, 12);
-	pc->buf = bio_data(sense_rq->bio);	/* pointer to mapped address */
+
+	/* pointer to mapped address */
+	pc->buf = bio_data(sense_rq->bio);
 	pc->req_xfer = blk_rq_bytes(sense_rq);
 
 	if (drive->media == ide_tape)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 060c893820c3..14e5e9ca2ad9 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -77,7 +77,8 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc)
 	    (rq && blk_pc_request(rq)))
 		uptodate = 1; /* FIXME */
 	else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
-		u8 *buf = pc->buf;
+
+		u8 *buf = bio_data(rq->bio);
 
 		if (!pc->error) {
 			floppy->sense_key = buf[2] & 0x0F;
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 1f7f50473a4f..ef5f34291437 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -288,11 +288,12 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
  * called on each failed packet command retry to analyze the request sense. We
  * currently do not utilize this information.
  */
-static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
+static void idetape_analyze_error(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc *pc = drive->failed_pc;
 	struct request *rq = drive->hwif->rq;
+	u8 *sense = bio_data(rq->bio);
 
 	tape->sense_key = sense[2] & 0xF;
 	tape->asc       = sense[12];
@@ -362,7 +363,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 
 	if (pc->c[0] == REQUEST_SENSE) {
 		if (uptodate)
-			idetape_analyze_error(drive, pc->buf);
+			idetape_analyze_error(drive);
 		else
 			printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
 					"itself - Aborting request!\n");
-- 
cgit v1.2.3


From 60cfab85da965035c7baf66a63f048155bb302b1 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Tue, 12 May 2009 08:59:49 +0200
Subject: ide-floppy/ide_floppy_get_format_progress: use local sense buffer

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-floppy_ioctl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 7a03d34bc240..3a1f9b50b3eb 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -198,11 +198,12 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive,
 					  int __user *arg)
 {
 	struct ide_disk_obj *floppy = drive->driver_data;
+	u8 sense_buf[18];
 	int progress_indication = 0x10000;
 
 	if (drive->atapi_flags & IDE_AFLAG_SRFP) {
 		ide_create_request_sense_cmd(drive, pc);
-		if (ide_queue_pc_tail(drive, floppy->disk, pc, pc->buf,
+		if (ide_queue_pc_tail(drive, floppy->disk, pc, sense_buf,
 				      pc->req_xfer))
 			return -EIO;
 
-- 
cgit v1.2.3


From 837272b4f9393df40d16cc2ac731221027048ba6 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Mon, 4 May 2009 09:48:57 +0200
Subject: ide-tape/ide_tape_get_bsize_from_bdesc: use local buffer

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index ef5f34291437..1a8c94055294 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1456,9 +1456,10 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc pc;
+	u8 buf[12];
 
 	idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.buf, pc.req_xfer)) {
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
 		if (tape->blk_size == 0) {
 			printk(KERN_WARNING "ide-tape: Cannot deal with zero "
@@ -1467,10 +1468,10 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
 		}
 		return;
 	}
-	tape->blk_size = (pc.buf[4 + 5] << 16) +
-				(pc.buf[4 + 6] << 8)  +
-				 pc.buf[4 + 7];
-	tape->drv_write_prot = (pc.buf[2] & 0x80) >> 7;
+	tape->blk_size = (buf[4 + 5] << 16) +
+				(buf[4 + 6] << 8)  +
+				 buf[4 + 7];
+	tape->drv_write_prot = (buf[2] & 0x80) >> 7;
 }
 
 static int idetape_chrdev_open(struct inode *inode, struct file *filp)
-- 
cgit v1.2.3


From 55ce3a129ea2e8faba4a11bb5dbc305590d1c20c Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Mon, 4 May 2009 09:38:15 +0200
Subject: ide-tape: fix READ POSITION cmd handling

ide-tape used to issue READ POSITION in several places and the
evaluation of the returned READ POSITION data was done in the
->pc_callback. Convert it to use local buffer and move that
evaluation chunk in the idetape_read_position(). Additionally, fold
idetape_create_read_position_cmd() into it, too, thus concentrating READ
POSITION handling in one method only and making all places call that.

Finally, mv {idetape,ide_tape}_read_position.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-tape.c | 102 ++++++++++++++++++++++++-------------------------
 1 file changed, 49 insertions(+), 53 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 1a8c94055294..ead2734bc710 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -386,30 +386,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc)
 			uptodate = 0;
 			err = pc->error;
 		}
-	} else if (pc->c[0] == READ_POSITION && uptodate) {
-		u8 *readpos = pc->buf;
-
-		debug_log(DBG_SENSE, "BOP - %s\n",
-				(readpos[0] & 0x80) ? "Yes" : "No");
-		debug_log(DBG_SENSE, "EOP - %s\n",
-				(readpos[0] & 0x40) ? "Yes" : "No");
-
-		if (readpos[0] & 0x4) {
-			printk(KERN_INFO "ide-tape: Block location is unknown"
-					 "to the tape\n");
-			clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
-			uptodate = 0;
-			err = IDE_DRV_ERROR_GENERAL;
-		} else {
-			debug_log(DBG_SENSE, "Block Location - %u\n",
-					be32_to_cpup((__be32 *)&readpos[4]));
-
-			tape->partition = readpos[1];
-			tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]);
-			set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
-		}
 	}
-
 	rq->errors = err;
 
 	return uptodate;
@@ -778,26 +755,44 @@ static int idetape_flush_tape_buffers(ide_drive_t *drive)
 	return 0;
 }
 
-static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc)
-{
-	ide_init_pc(pc);
-	pc->c[0] = READ_POSITION;
-	pc->req_xfer = 20;
-}
-
-static int idetape_read_position(ide_drive_t *drive)
+static int ide_tape_read_position(ide_drive_t *drive)
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct ide_atapi_pc pc;
-	int position;
+	u8 buf[20];
 
 	debug_log(DBG_PROCS, "Enter %s\n", __func__);
 
-	idetape_create_read_position_cmd(&pc);
-	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc.buf, pc.req_xfer))
+	/* prep cmd */
+	ide_init_pc(&pc);
+	pc.c[0] = READ_POSITION;
+	pc.req_xfer = 20;
+
+	if (ide_queue_pc_tail(drive, tape->disk, &pc, buf, pc.req_xfer))
 		return -1;
-	position = tape->first_frame;
-	return position;
+
+	if (!pc.error) {
+		debug_log(DBG_SENSE, "BOP - %s\n",
+				(buf[0] & 0x80) ? "Yes" : "No");
+		debug_log(DBG_SENSE, "EOP - %s\n",
+				(buf[0] & 0x40) ? "Yes" : "No");
+
+		if (buf[0] & 0x4) {
+			printk(KERN_INFO "ide-tape: Block location is unknown"
+					 "to the tape\n");
+			clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+			return -1;
+		} else {
+			debug_log(DBG_SENSE, "Block Location - %u\n",
+					be32_to_cpup((__be32 *)&buf[4]));
+
+			tape->partition = buf[1];
+			tape->first_frame = be32_to_cpup((__be32 *)&buf[4]);
+			set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
+		}
+	}
+
+	return tape->first_frame;
 }
 
 static void idetape_create_locate_cmd(ide_drive_t *drive,
@@ -840,19 +835,21 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
 {
 	idetape_tape_t *tape = drive->driver_data;
 	struct gendisk *disk = tape->disk;
-	int retval;
+	int ret;
 	struct ide_atapi_pc pc;
 
 	if (tape->chrdev_dir == IDETAPE_DIR_READ)
 		__ide_tape_discard_merge_buffer(drive);
 	idetape_wait_ready(drive, 60 * 5 * HZ);
 	idetape_create_locate_cmd(drive, &pc, block, partition, skip);
-	retval = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
-	if (retval)
-		return (retval);
+	ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
+	if (ret)
+		return ret;
 
-	idetape_create_read_position_cmd(&pc);
-	return ide_queue_pc_tail(drive, disk, &pc, pc.buf, pc.req_xfer);
+	ret = ide_tape_read_position(drive);
+	if (ret < 0)
+		return ret;
+	return 0;
 }
 
 static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
@@ -863,7 +860,7 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
 
 	__ide_tape_discard_merge_buffer(drive);
 	if (restore_position) {
-		position = idetape_read_position(drive);
+		position = ide_tape_read_position(drive);
 		seek = position > 0 ? position : 0;
 		if (idetape_position_tape(drive, seek, 0, 0)) {
 			printk(KERN_INFO "ide-tape: %s: position_tape failed in"
@@ -1042,20 +1039,19 @@ static int idetape_rewind_tape(ide_drive_t *drive)
 {
 	struct ide_tape_obj *tape = drive->driver_data;
 	struct gendisk *disk = tape->disk;
-	int retval;
 	struct ide_atapi_pc pc;
+	int ret;
 
 	debug_log(DBG_SENSE, "Enter %s\n", __func__);
 
 	idetape_create_rewind_cmd(drive, &pc);
-	retval = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
-	if (retval)
-		return retval;
+	ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0);
+	if (ret)
+		return ret;
 
-	idetape_create_read_position_cmd(&pc);
-	retval = ide_queue_pc_tail(drive, disk, &pc, pc.buf, pc.req_xfer);
-	if (retval)
-		return retval;
+	ret = ide_tape_read_position(drive);
+	if (ret < 0)
+		return ret;
 	return 0;
 }
 
@@ -1413,7 +1409,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
 	if (cmd == MTIOCGET || cmd == MTIOCPOS) {
 		block_offset = tape->valid /
 			(tape->blk_size * tape->user_bs_factor);
-		position = idetape_read_position(drive);
+		position = ide_tape_read_position(drive);
 		if (position < 0)
 			return -EIO;
 	}
@@ -1516,7 +1512,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 		goto out_put_tape;
 	}
 
-	idetape_read_position(drive);
+	ide_tape_read_position(drive);
 	if (!test_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags))
 		(void)idetape_rewind_tape(drive);
 
-- 
cgit v1.2.3


From 19f52a784f7ecb5b51cd73cc4514614b600b995a Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Mon, 4 May 2009 09:53:03 +0200
Subject: ide-atapi: remove pc->buf

Now after all users of pc->buf have been converted, remove the 64B buffer
embedded in each packet command.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c        |  6 ------
 drivers/ide/ide-floppy.c       |  8 +-------
 drivers/ide/ide-floppy_ioctl.c |  1 -
 drivers/ide/ide-tape.c         |  7 ++-----
 include/linux/ide.h            | 11 -----------
 5 files changed, 3 insertions(+), 30 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 66ea1e7774fd..3075b0414667 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -74,8 +74,6 @@ EXPORT_SYMBOL_GPL(ide_check_atapi_device);
 void ide_init_pc(struct ide_atapi_pc *pc)
 {
 	memset(pc, 0, sizeof(*pc));
-	pc->buf = pc->pc_buf;
-	pc->buf_size = IDE_PC_BUFFER_SIZE;
 }
 EXPORT_SYMBOL_GPL(ide_init_pc);
 
@@ -254,10 +252,6 @@ void ide_retry_pc(ide_drive_t *drive)
 	ide_init_pc(pc);
 	memcpy(pc->c, sense_rq->cmd, 12);
 
-	/* pointer to mapped address */
-	pc->buf = bio_data(sense_rq->bio);
-	pc->req_xfer = blk_rq_bytes(sense_rq);
-
 	if (drive->media == ide_tape)
 		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 14e5e9ca2ad9..800c83a9db83 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -210,8 +210,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
 	pc->rq = rq;
 	if (rq->cmd_flags & REQ_RW)
 		pc->flags |= PC_FLAG_WRITING;
-	pc->buf = NULL;
-	pc->buf_size = blk_rq_bytes(rq);
+
 	pc->flags |= PC_FLAG_DMA_OK;
 }
 
@@ -226,9 +225,6 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
 		if (rq_data_dir(rq) == WRITE)
 			pc->flags |= PC_FLAG_WRITING;
 	}
-	/* pio will be performed by ide_pio_bytes() which handles sg fine */
-	pc->buf = NULL;
-	pc->buf_size = blk_rq_bytes(rq);
 }
 
 static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
@@ -388,8 +384,6 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
 	drive->capacity64 = 0;
 
 	ide_floppy_create_read_capacity_cmd(&pc);
-	pc.buf_size = sizeof(pc_buf);
-
 	if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) {
 		printk(KERN_ERR PFX "Can't get floppy parameters\n");
 		return 1;
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 3a1f9b50b3eb..9c2288234dea 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -47,7 +47,6 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive,
 		return -EINVAL;
 
 	ide_floppy_create_read_capacity_cmd(pc);
-	pc->buf_size = sizeof(pc_buf);
 
 	if (ide_queue_pc_tail(drive, floppy->disk, pc, pc_buf, pc->req_xfer)) {
 		printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index ead2734bc710..9ca2665faf33 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -568,9 +568,8 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
 	ide_init_pc(pc);
 	put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
 	pc->c[1] = 1;
-	pc->buf = NULL;
-	pc->buf_size = blk_rq_bytes(rq);
-	if (pc->buf_size == tape->buffer_size)
+
+	if (blk_rq_bytes(rq) == tape->buffer_size)
 		pc->flags |= PC_FLAG_DMA_OK;
 
 	if (opcode == READ_6)
@@ -1608,8 +1607,6 @@ static void idetape_get_inquiry_results(ide_drive_t *drive)
 	char fw_rev[4], vendor_id[8], product_id[16];
 
 	idetape_create_inquiry_cmd(&pc);
-	pc.buf_size = sizeof(pc_buf);
-
 	if (ide_queue_pc_tail(drive, tape->disk, &pc, pc_buf, pc.req_xfer)) {
 		printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
 				tape->name);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 4cd7157a403f..59aedcd7faee 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -341,11 +341,6 @@ enum {
 	PC_FLAG_WRITING			= (1 << 6),
 };
 
-/*
- * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
- * This is used for several packet commands (not for READ/WRITE commands).
- */
-#define IDE_PC_BUFFER_SIZE	64
 #define ATAPI_WAIT_PC		(60 * HZ)
 
 struct ide_atapi_pc {
@@ -358,10 +353,6 @@ struct ide_atapi_pc {
 	/* bytes to transfer */
 	int req_xfer;
 
-	/* data buffer */
-	u8 *buf;
-	int buf_size;
-
 	/* the corresponding request */
 	struct request *rq;
 
@@ -371,8 +362,6 @@ struct ide_atapi_pc {
 	 * those are more or less driver-specific and some of them are subject
 	 * to change/removal later.
 	 */
-	u8 pc_buf[IDE_PC_BUFFER_SIZE];
-
 	unsigned long timeout;
 };
 
-- 
cgit v1.2.3


From 239f7e25346e22c4a94bde004d845e7397947c01 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Thu, 23 Apr 2009 08:30:29 +0200
Subject: ide-cd: use whole request_sense buffer in EH

Now that we use a static request_sense buffer, use it instead of the
first 18 bytes only. Also, remove sense-arg to cdrom_analyze_sense_data
and cdrom_log_sense since we can access it through drive->sense_data
now.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-cd.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 4c7792fd5f93..dca41ae0d048 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -92,16 +92,16 @@ static void cdrom_saw_media_change(ide_drive_t *drive)
 	drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
 }
 
-static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
-			   struct request_sense *sense)
+static int cdrom_log_sense(ide_drive_t *drive, struct request *rq)
 {
+	struct request_sense *sense = &drive->sense_data;
 	int log = 0;
 
-	ide_debug_log(IDE_DBG_SENSE, "sense_key: 0x%x", sense->sense_key);
-
 	if (!sense || !rq || (rq->cmd_flags & REQ_QUIET))
 		return 0;
 
+	ide_debug_log(IDE_DBG_SENSE, "sense_key: 0x%x", sense->sense_key);
+
 	switch (sense->sense_key) {
 	case NO_SENSE:
 	case RECOVERED_ERROR:
@@ -140,12 +140,12 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
 }
 
 static void cdrom_analyze_sense_data(ide_drive_t *drive,
-			      struct request *failed_command,
-			      struct request_sense *sense)
+				     struct request *failed_command)
 {
+	struct request_sense *sense = &drive->sense_data;
+	struct cdrom_info *info = drive->driver_data;
 	unsigned long sector;
 	unsigned long bio_sectors;
-	struct cdrom_info *info = drive->driver_data;
 
 	ide_debug_log(IDE_DBG_SENSE, "error_code: 0x%x, sense_key: 0x%x",
 				     sense->error_code, sense->sense_key);
@@ -154,7 +154,7 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
 		ide_debug_log(IDE_DBG_SENSE, "failed cmd: 0x%x",
 					     failed_command->cmd[0]);
 
-	if (!cdrom_log_sense(drive, failed_command, sense))
+	if (!cdrom_log_sense(drive, failed_command))
 		return;
 
 	/*
@@ -225,15 +225,14 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq)
 			 * sense pointer set.
 			 */
 			memcpy(failed->sense, sense, 18);
-			sense = failed->sense;
 			failed->sense_len = rq->sense_len;
 		}
-		cdrom_analyze_sense_data(drive, failed, sense);
+		cdrom_analyze_sense_data(drive, failed);
 
 		if (ide_end_rq(drive, failed, -EIO, blk_rq_bytes(failed)))
 			BUG();
 	} else
-		cdrom_analyze_sense_data(drive, NULL, sense);
+		cdrom_analyze_sense_data(drive, NULL);
 }
 
 
-- 
cgit v1.2.3


From 103f7033bd0f7b65ff3e0a5ea72449d08010b031 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Sun, 26 Apr 2009 10:39:07 +0200
Subject: ide: unify interrupt reason checking

Add ide_check_ireason() function that handles all ATAPI devices.
Reorganize all unlikely cases in ireason checking further down in the
code path.

In addition, add PFX for printks originating from ide-atapi. Finally,
remove ide_cd_check_ireason.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
 drivers/ide/ide-atapi.c | 95 +++++++++++++++++++++++++++++++++++--------------
 drivers/ide/ide-cd.c    | 47 +-----------------------
 include/linux/ide.h     |  2 ++
 3 files changed, 71 insertions(+), 73 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 3075b0414667..1125ce29809b 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -10,6 +10,9 @@
 
 #include <scsi/scsi.h>
 
+#define DRV_NAME "ide-atapi"
+#define PFX DRV_NAME ": "
+
 #ifdef DEBUG
 #define debug_log(fmt, args...) \
 	printk(KERN_INFO "ide: " fmt, ## args)
@@ -197,8 +200,8 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
 			      GFP_NOIO);
 	if (unlikely(err)) {
 		if (printk_ratelimit())
-			printk(KERN_WARNING "%s: failed to map sense buffer\n",
-			       drive->name);
+			printk(KERN_WARNING PFX "%s: failed to map sense "
+					    "buffer\n", drive->name);
 		return;
 	}
 
@@ -219,7 +222,7 @@ int ide_queue_sense_rq(ide_drive_t *drive, void *special)
 {
 	/* deferred failure from ide_prep_sense() */
 	if (!drive->sense_rq_armed) {
-		printk(KERN_WARNING "%s: failed queue sense request\n",
+		printk(KERN_WARNING PFX "%s: error queuing a sense request\n",
 		       drive->name);
 		return -ENOMEM;
 	}
@@ -292,7 +295,7 @@ int ide_cd_expiry(ide_drive_t *drive)
 		break;
 	default:
 		if (!(rq->cmd_flags & REQ_QUIET))
-			printk(KERN_INFO "cmd 0x%x timed out\n",
+			printk(KERN_INFO PFX "cmd 0x%x timed out\n",
 					 rq->cmd[0]);
 		wait = 0;
 		break;
@@ -325,6 +328,55 @@ void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
 }
 EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);
 
+/*
+ * Check the contents of the interrupt reason register and attempt to recover if
+ * there are problems.
+ *
+ * Returns:
+ * - 0 if everything's ok
+ * - 1 if the request has to be terminated.
+ */
+int ide_check_ireason(ide_drive_t *drive, struct request *rq, int len,
+		      int ireason, int rw)
+{
+	ide_hwif_t *hwif = drive->hwif;
+
+	debug_log("ireason: 0x%x, rw: 0x%x\n", ireason, rw);
+
+	if (ireason == (!rw << 1))
+		return 0;
+	else if (ireason == (rw << 1)) {
+		printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
+				drive->name, __func__);
+
+		if (dev_is_idecd(drive))
+			ide_pad_transfer(drive, rw, len);
+	} else if (!rw && ireason == ATAPI_COD) {
+		if (dev_is_idecd(drive)) {
+			/*
+			 * Some drives (ASUS) seem to tell us that status info
+			 * is available.  Just get it and ignore.
+			 */
+			(void)hwif->tp_ops->read_status(hwif);
+			return 0;
+		}
+	} else {
+		if (ireason & ATAPI_COD)
+			printk(KERN_ERR PFX "%s: CoD != 0 in %s\n", drive->name,
+					__func__);
+
+		/* drive wants a command packet, or invalid ireason... */
+		printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
+				drive->name, __func__, ireason);
+	}
+
+	if (dev_is_idecd(drive) && rq->cmd_type == REQ_TYPE_ATA_PC)
+		rq->cmd_flags |= REQ_FAILED;
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(ide_check_ireason);
+
 /*
  * This is the usual interrupt handler which will be called during a packet
  * command.  We will transfer some of the data (as requested by the drive)
@@ -359,7 +411,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 
 		if (rc || (drive->media == ide_tape && (stat & ATA_ERR))) {
 			if (drive->media == ide_floppy)
-				printk(KERN_ERR "%s: DMA %s error\n",
+				printk(KERN_ERR PFX "%s: DMA %s error\n",
 					drive->name, rq_data_dir(pc->rq)
 						     ? "write" : "read");
 			pc->flags |= PC_FLAG_DMA_ERROR;
@@ -391,8 +443,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 				pc->rq->errors++;
 
 			if (rq->cmd[0] == REQUEST_SENSE) {
-				printk(KERN_ERR "%s: I/O error in request sense"
-						" command\n", drive->name);
+				printk(KERN_ERR PFX "%s: I/O error in request "
+						"sense command\n", drive->name);
 				return ide_do_reset(drive);
 			}
 
@@ -434,8 +486,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 
 	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
 		pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
-		printk(KERN_ERR "%s: The device wants to issue more interrupts "
-				"in DMA mode\n", drive->name);
+		printk(KERN_ERR PFX "%s: The device wants to issue more "
+				"interrupts in DMA mode\n", drive->name);
 		ide_dma_off(drive);
 		return ide_do_reset(drive);
 	}
@@ -443,19 +495,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
 	/* Get the number of bytes to transfer on this interrupt. */
 	ide_read_bcount_and_ireason(drive, &bcount, &ireason);
 
-	if (ireason & ATAPI_COD) {
-		printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
+	if (ide_check_ireason(drive, rq, bcount, ireason, write))
 		return ide_do_reset(drive);
-	}
-
-	if (((ireason & ATAPI_IO) == ATAPI_IO) == write) {
-		/* Hopefully, we will never get here */
-		printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
-				"to %s!\n", drive->name,
-				(ireason & ATAPI_IO) ? "Write" : "Read",
-				(ireason & ATAPI_IO) ? "Read" : "Write");
-		return ide_do_reset(drive);
-	}
 
 	done = min_t(unsigned int, bcount, cmd->nleft);
 	ide_pio_bytes(drive, cmd, write, done);
@@ -503,13 +544,13 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
 
 	while (retries-- && ((ireason & ATAPI_COD) == 0 ||
 		(ireason & ATAPI_IO))) {
-		printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
+		printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing "
 				"a packet command, retrying\n", drive->name);
 		udelay(100);
 		ireason = ide_read_ireason(drive);
 		if (retries == 0) {
-			printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
-					"a packet command, ignoring\n",
+			printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing"
+					" a packet command, ignoring\n",
 					drive->name);
 			ireason |= ATAPI_COD;
 			ireason &= ~ATAPI_IO;
@@ -540,7 +581,7 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 	u8 ireason;
 
 	if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
-		printk(KERN_ERR "%s: Strange, packet command initiated yet "
+		printk(KERN_ERR PFX "%s: Strange, packet command initiated yet "
 				"DRQ isn't asserted\n", drive->name);
 		return startstop;
 	}
@@ -582,8 +623,8 @@ static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
 			ireason = ide_wait_ireason(drive, ireason);
 
 		if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
-			printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
-					"a packet command\n", drive->name);
+			printk(KERN_ERR PFX "%s: (IO,CoD) != (0,1) while "
+				"issuing a packet command\n", drive->name);
 
 			return ide_do_reset(drive);
 		}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index dca41ae0d048..d299713bfdc1 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -410,50 +410,6 @@ end_request:
 		return 2;
 }
 
-/*
- * Check the contents of the interrupt reason register from the cdrom
- * and attempt to recover if there are problems.  Returns  0 if everything's
- * ok; nonzero if the request has been terminated.
- */
-static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
-				int len, int ireason, int rw)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	ide_debug_log(IDE_DBG_FUNC, "ireason: 0x%x, rw: 0x%x", ireason, rw);
-
-	/*
-	 * ireason == 0: the drive wants to receive data from us
-	 * ireason == 2: the drive is expecting to transfer data to us
-	 */
-	if (ireason == (!rw << 1))
-		return 0;
-	else if (ireason == (rw << 1)) {
-
-		/* whoops... */
-		printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
-				drive->name, __func__);
-
-		ide_pad_transfer(drive, rw, len);
-	} else  if (rw == 0 && ireason == 1) {
-		/*
-		 * Some drives (ASUS) seem to tell us that status info is
-		 * available.  Just get it and ignore.
-		 */
-		(void)hwif->tp_ops->read_status(hwif);
-		return 0;
-	} else {
-		/* drive wants a command packet, or invalid ireason... */
-		printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
-				drive->name, __func__, ireason);
-	}
-
-	if (rq->cmd_type == REQ_TYPE_ATA_PC)
-		rq->cmd_flags |= REQ_FAILED;
-
-	return -1;
-}
-
 static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	struct request *rq = cmd->rq;
@@ -645,8 +601,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 		goto out_end;
 	}
 
-	/* check which way to transfer data */
-	rc = ide_cd_check_ireason(drive, rq, len, ireason, write);
+	rc = ide_check_ireason(drive, rq, len, ireason, write);
 	if (rc)
 		goto out_end;
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 59aedcd7faee..70a2c94d6680 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1125,6 +1125,8 @@ void SELECT_MASK(ide_drive_t *, int);
 u8 ide_read_error(ide_drive_t *);
 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
 
+int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
+
 int ide_check_atapi_device(ide_drive_t *, const char *);
 
 void ide_init_pc(struct ide_atapi_pc *);
-- 
cgit v1.2.3


From 79ca743f68a94443518f165355d4327bc0f87632 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Mon, 15 Jun 2009 07:32:04 +0200
Subject: ide-tape: fix build issue

This fixes

drivers/ide/ide-tape.c: In function `idetape_chrdev_open':
drivers/ide/ide-tape.c:1515: error: implicit declaration of function `idetape_read_position'
make[1]: *** [drivers/ide/ide-tape.o] Error 1

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-tape.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index bb71e1e99dad..3a3f10f3f8fe 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1512,7 +1512,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
 		goto out_put_tape;
 	}
 
-	idetape_read_position(drive);
+	ide_tape_read_position(drive);
 	if (!test_bit(ilog2(IDE_AFLAG_ADDRESS_VALID), &drive->atapi_flags))
 		(void)idetape_rewind_tape(drive);
 
-- 
cgit v1.2.3


From c9ef59ff01b6bd1c7360a64fcc8556a1193c2ed0 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 15 Jun 2009 18:52:53 +0200
Subject: ide: IORDY handling fixes

Add ide_pio_need_iordy() helper and convert host drivers to use it.

This fixes it8172, it8213, pdc202xx_old, piix, slc90e66 and siimage
host drivers to handle IORDY correctly.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/at91_ide.c      |  3 +--
 drivers/ide/ide-xfer-mode.c |  6 ++++++
 drivers/ide/it8172.c        |  2 +-
 drivers/ide/it8213.c        |  2 +-
 drivers/ide/pdc202xx_old.c  |  2 +-
 drivers/ide/piix.c          |  2 +-
 drivers/ide/siimage.c       | 15 ++++++++-------
 drivers/ide/sl82c105.c      |  3 +--
 drivers/ide/slc90e66.c      |  2 +-
 include/linux/ide.h         |  1 +
 10 files changed, 22 insertions(+), 16 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index fc0949a8cfde..dbfeda42b940 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -185,8 +185,7 @@ static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	timing = ide_timing_find_mode(XFER_PIO_0 + pio);
 	BUG_ON(!timing);
 
-	if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
-	    !(ata_id_is_cfa(drive->id) && pio > 4))
+	if (ide_pio_need_iordy(drive, pio))
 		use_iordy = 1;
 
 	apply_timings(chipselect, pio, timing, use_iordy);
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index af44be9d546c..0b47ca139079 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -107,6 +107,12 @@ u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
 }
 EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
 
+int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio)
+{
+	return ata_id_pio_need_iordy(drive->id, pio);
+}
+EXPORT_SYMBOL_GPL(ide_pio_need_iordy);
+
 int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
 {
 	ide_hwif_t *hwif = drive->hwif;
diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c
index e021078cd06b..0d266a5b524d 100644
--- a/drivers/ide/it8172.c
+++ b/drivers/ide/it8172.c
@@ -66,7 +66,7 @@ static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	if (drive->media == ide_disk)
 		/* enable prefetch */
 		drive_enables |= 0x0004 << (drive->dn * 4);
-	if (ata_id_has_iordy(drive->id))
+	if (ide_pio_need_iordy(drive, pio))
 		/* enable IORDY sample-point */
 		drive_enables |= 0x0002 << (drive->dn * 4);
 
diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c
index d7969b6d139e..47976167796a 100644
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -50,7 +50,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		control |= 1;	/* Programmable timing on */
 	if (drive->media != ide_disk)
 		control |= 4;	/* ATAPI */
-	if (pio > 2)
+	if (ide_pio_need_iordy(drive, pio))
 		control |= 2;	/* IORDY */
 	if (is_slave) {
 		master_data |=  0x4000;
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index b6abf7e52cac..4f5b536282af 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -73,7 +73,7 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
 		 * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
 		 */
 		AP &= ~0x3f;
-		if (ata_id_iordy_disable(drive->id))
+		if (ide_pio_need_iordy(drive, speed - XFER_PIO_0))
 			AP |= 0x20;	/* set IORDY_EN bit */
 		if (drive->media == ide_disk)
 			AP |= 0x10;	/* set Prefetch_EN bit */
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 69860dea3820..bf14f39bd3a7 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -98,7 +98,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		control |= 1;	/* Programmable timing on */
 	if (drive->media == ide_disk)
 		control |= 4;	/* Prefetch, post write */
-	if (pio > 2)
+	if (ide_pio_need_iordy(drive, pio))
 		control |= 2;	/* IORDY */
 	if (is_slave) {
 		master_data |=  0x4000;
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index bd82d228608c..6a643fdf0e6e 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -32,7 +32,6 @@
  *  smarter code in libata.
  *
  * TODO:
- * - IORDY fixes
  * - VDMA support
  */
 
@@ -234,8 +233,7 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive)
  *	@pio: PIO mode number
  *
  *	Load the timing settings for this device mode into the
- *	controller. If we are in PIO mode 3 or 4 turn on IORDY
- *	monitoring (bit 9). The TF timing is bits 31:16
+ *	controller.
  */
 
 static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
@@ -276,13 +274,16 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
 	/* now set up IORDY */
 	speedp = sil_ioread16(dev, tfaddr - 2);
 	speedp &= ~0x200;
-	if (pio > 2)
-		speedp |= 0x200;
-	sil_iowrite16(dev, speedp, tfaddr - 2);
 
 	mode = sil_ioread8(dev, base + addr_mask);
 	mode &= ~(unit ? 0x30 : 0x03);
-	mode |= unit ? 0x10 : 0x01;
+
+	if (ide_pio_need_iordy(drive, pio)) {
+		speedp |= 0x200;
+		mode |= unit ? 0x10 : 0x01;
+	}
+
+	sil_iowrite16(dev, speedp, tfaddr - 2);
 	sil_iowrite8(dev, mode, base + addr_mask);
 }
 
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 0924abff52ff..88ac47085cd9 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -61,8 +61,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
 	if (cmd_off == 0)
 		cmd_off = 1;
 
-	if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
-	    !(pio > 4 && ata_id_is_cfa(drive->id)))
+	if (ide_pio_need_iordy(drive, pio))
 		iordy = 0x40;
 
 	return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
index f55d7d6313e8..9aec78d3bcff 100644
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -44,7 +44,7 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		control |= 1;	/* Programmable timing on */
 	if (drive->media == ide_disk)
 		control |= 4;	/* Prefetch, post write */
-	if (pio > 2)
+	if (ide_pio_need_iordy(drive, pio))
 		control |= 2;	/* IORDY */
 	if (is_slave) {
 		master_data |=  0x4000;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index cdb29b6c195f..8c7f5e50e912 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1514,6 +1514,7 @@ int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
 int ide_scan_pio_blacklist(char *);
 const char *ide_xfer_verbose(u8);
 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
+int ide_pio_need_iordy(ide_drive_t *, const u8);
 int ide_set_pio_mode(ide_drive_t *, u8);
 int ide_set_dma_mode(ide_drive_t *, u8);
 void ide_set_pio(ide_drive_t *, u8);
-- 
cgit v1.2.3


From 5880b5de7101cc123778c5d17d4f3986351f3122 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 15 Jun 2009 18:52:54 +0200
Subject: ide: don't enable IORDY at a probe time

* Add 'unsigned long port_flags' field to ide_hwif_t.

* Add IDE_PFLAG_PROBING port flag and keep it set during probing.

* Fix ide_pio_need_iordy() to not enable IORDY at a probe time
  (IORDY may lead to controller lock up on certain controllers
   if the port is not occupied).

Loosely based on the recent libata's fix by Tejun, thanks to Alan
for the hint that IDE may also need it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-probe.c     | 16 +++++++++++++++-
 drivers/ide/ide-xfer-mode.c |  6 ++++++
 include/linux/ide.h         |  6 ++++++
 3 files changed, 27 insertions(+), 1 deletion(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index f371b0de314f..fdd04bcd5568 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1378,6 +1378,9 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 
 		ide_init_port(hwif, i & 1, d);
 		ide_port_cable_detect(hwif);
+
+		hwif->port_flags |= IDE_PFLAG_PROBING;
+
 		ide_port_init_devices(hwif);
 	}
 
@@ -1388,6 +1391,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		if (ide_probe_port(hwif) == 0)
 			hwif->present = 1;
 
+		hwif->port_flags &= ~IDE_PFLAG_PROBING;
+
 		if ((hwif->host_flags & IDE_HFLAG_4DRIVES) == 0 ||
 		    hwif->mate == NULL || hwif->mate->present == 0) {
 			if (ide_register_port(hwif)) {
@@ -1569,11 +1574,20 @@ EXPORT_SYMBOL_GPL(ide_host_remove);
 
 void ide_port_scan(ide_hwif_t *hwif)
 {
+	int rc;
+
 	ide_port_apply_params(hwif);
 	ide_port_cable_detect(hwif);
+
+	hwif->port_flags |= IDE_PFLAG_PROBING;
+
 	ide_port_init_devices(hwif);
 
-	if (ide_probe_port(hwif) < 0)
+	rc = ide_probe_port(hwif);
+
+	hwif->port_flags &= ~IDE_PFLAG_PROBING;
+
+	if (rc < 0)
 		return;
 
 	hwif->present = 1;
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index 0b47ca139079..46d203ce60cc 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -109,6 +109,12 @@ EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
 
 int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio)
 {
+	/*
+	 * IORDY may lead to controller lock up on certain controllers
+	 * if the port is not occupied.
+	 */
+	if (pio == 0 && (drive->hwif->port_flags & IDE_PFLAG_PROBING))
+		return 0;
 	return ata_id_pio_need_iordy(drive->id, pio);
 }
 EXPORT_SYMBOL_GPL(ide_pio_need_iordy);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 8c7f5e50e912..8771d49aa874 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -661,6 +661,10 @@ struct ide_dma_ops {
 	u8	(*dma_sff_read_status)(struct hwif_s *);
 };
 
+enum {
+	IDE_PFLAG_PROBING		= (1 << 0),
+};
+
 struct ide_host;
 
 typedef struct hwif_s {
@@ -677,6 +681,8 @@ typedef struct hwif_s {
 
 	ide_drive_t	*devices[MAX_DRIVES + 1];
 
+	unsigned long	port_flags;
+
 	u8 major;	/* our major number */
 	u8 index;	/* 0 for ide0; 1 for ide1; ... */
 	u8 channel;	/* for dual-port chips: 0=primary, 1=secondary */
-- 
cgit v1.2.3


From ccae50bcf9b8a2365e8050ccdd20b172db7b9be1 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:52:55 +0200
Subject: sgiioc4: coding style cleanup

Fix several errors and warnings given by checkpatch.pl:

- space between the asterisk and parameter name;

- inconsistent spacing between operator and operands;

- space between *sizeof* and open parenthesis;

- #include <asm/io.h> instead of #include <linux/io.h>

- use of *typedef* instead of a structure tag;

- line over 80 characters.

In addition to these changes, also do the following:

- indent with tabs instead of spaces;

- put the function's result type and name/parameters on the same line;

- join back the needlessly broken lines;

- get rid of needless type cast in sgiioc4_checkirq();

- remove space between the type cast and the variable name;

- remove commented out field initializer;

- uppercase the acronyms, lowercase the normal words in the comments;

- fix up the multi-line comment style...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/sgiioc4.c | 119 +++++++++++++++++++++++---------------------------
 1 file changed, 54 insertions(+), 65 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index 5f37f168f944..b7d61dc64096 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
- * Copyright (C) 2008 MontaVista Software, Inc.
+ * Copyright (C) 2008-2009 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License
@@ -29,8 +29,7 @@
 #include <linux/blkdev.h>
 #include <linux/scatterlist.h>
 #include <linux/ioc4.h>
-#include <asm/io.h>
-
+#include <linux/io.h>
 #include <linux/ide.h>
 
 #define DRV_NAME "SGIIOC4"
@@ -72,7 +71,7 @@
 #define IOC4_CMD_CTL_BLK_SIZE	0x20
 #define IOC4_SUPPORTED_FIRMWARE_REV 46
 
-typedef struct {
+struct ioc4_dma_regs {
 	u32 timing_reg0;
 	u32 timing_reg1;
 	u32 low_mem_ptr;
@@ -82,17 +81,18 @@ typedef struct {
 	u32 dev_byte_count;
 	u32 mem_byte_count;
 	u32 status;
-} ioc4_dma_regs_t;
+};
 
 /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
 /* IOC4 has only 1 IDE channel */
-#define IOC4_PRD_BYTES       16
-#define IOC4_PRD_ENTRIES     (PAGE_SIZE /(4*IOC4_PRD_BYTES))
+#define IOC4_PRD_BYTES		16
+#define IOC4_PRD_ENTRIES	(PAGE_SIZE / (4 * IOC4_PRD_BYTES))
 
 
-static void
-sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
-			unsigned long ctrl_port, unsigned long irq_port)
+static void sgiioc4_init_hwif_ports(struct ide_hw *hw,
+				    unsigned long data_port,
+				    unsigned long ctrl_port,
+				    unsigned long irq_port)
 {
 	unsigned long reg = data_port;
 	int i;
@@ -105,13 +105,11 @@ sgiioc4_init_hwif_ports(struct ide_hw *hw, unsigned long data_port,
 	hw->io_ports.irq_addr = irq_port;
 }
 
-static int
-sgiioc4_checkirq(ide_hwif_t * hwif)
+static int sgiioc4_checkirq(ide_hwif_t *hwif)
 {
-	unsigned long intr_addr =
-		hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
+	unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
 
-	if ((u8)readl((void __iomem *)intr_addr) & 0x03)
+	if (readl((void __iomem *)intr_addr) & 0x03)
 		return 1;
 
 	return 0;
@@ -119,8 +117,7 @@ sgiioc4_checkirq(ide_hwif_t * hwif)
 
 static u8 sgiioc4_read_status(ide_hwif_t *);
 
-static int
-sgiioc4_clearirq(ide_drive_t * drive)
+static int sgiioc4_clearirq(ide_drive_t *drive)
 {
 	u32 intr_reg;
 	ide_hwif_t *hwif = drive->hwif;
@@ -158,12 +155,10 @@ sgiioc4_clearirq(ide_drive_t * drive)
 				readl((void __iomem *)(io_ports->irq_addr + 4));
 			pci_read_config_dword(dev, PCI_COMMAND,
 					      &pci_stat_cmd_reg);
-			printk(KERN_ERR
-			       "%s(%s) : PCI Bus Error when doing DMA:"
-				   " status-cmd reg is 0x%x\n",
+			printk(KERN_ERR "%s(%s): PCI Bus Error when doing DMA: "
+			       "status-cmd reg is 0x%x\n",
 			       __func__, drive->name, pci_stat_cmd_reg);
-			printk(KERN_ERR
-			       "%s(%s) : PCI Error Address is 0x%x%x\n",
+			printk(KERN_ERR "%s(%s): PCI Error Address is 0x%x%x\n",
 			       __func__, drive->name,
 			       pci_err_addr_high, pci_err_addr_low);
 			/* Clear the PCI Error indicator */
@@ -189,8 +184,7 @@ static void sgiioc4_dma_start(ide_drive_t *drive)
 	writel(temp_reg, (void __iomem *)ioc4_dma_addr);
 }
 
-static u32
-sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
+static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
 {
 	unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 	u32	ioc4_dma;
@@ -227,7 +221,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive)
 	}
 
 	/*
-	 * The IOC4 will DMA 1's to the ending dma area to indicate that
+	 * The IOC4 will DMA 1's to the ending DMA area to indicate that
 	 * previous data DMA is complete.  This is necessary because of relaxed
 	 * ordering between register reads and DMA writes on the Altix.
 	 */
@@ -265,7 +259,7 @@ static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
 }
 
-/* returns 1 if dma irq issued, 0 otherwise */
+/* Returns 1 if DMA IRQ issued, 0 otherwise */
 static int sgiioc4_dma_test_irq(ide_drive_t *drive)
 {
 	return sgiioc4_checkirq(drive->hwif);
@@ -286,8 +280,7 @@ static void sgiioc4_resetproc(ide_drive_t *drive)
 	sgiioc4_clearirq(drive);
 }
 
-static void
-sgiioc4_dma_lost_irq(ide_drive_t * drive)
+static void sgiioc4_dma_lost_irq(ide_drive_t *drive)
 {
 	sgiioc4_resetproc(drive);
 
@@ -313,13 +306,13 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif)
 	return reg;
 }
 
-/* Creates a dma map for the scatter-gather list entries */
-static int __devinit
-ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
+/* Creates a DMA map for the scatter-gather list entries */
+static int __devinit ide_dma_sgiioc4(ide_hwif_t *hwif,
+				     const struct ide_port_info *d)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
-	int num_ports = sizeof (ioc4_dma_regs_t);
+	int num_ports = sizeof(struct ioc4_dma_regs);
 	void *pad;
 
 	printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
@@ -362,8 +355,7 @@ dma_pci_alloc_failure:
 }
 
 /* Initializes the IOC4 DMA Engine */
-static void
-sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
+static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t *drive)
 {
 	u32 ioc4_dma;
 	ide_hwif_t *hwif = drive->hwif;
@@ -374,31 +366,27 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
 	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 
 	if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
-		printk(KERN_WARNING
-			"%s(%s):Warning!! DMA from previous transfer was still active\n",
-		       __func__, drive->name);
+		printk(KERN_WARNING "%s(%s): Warning!! DMA from previous "
+		       "transfer was still active\n", __func__, drive->name);
 		writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 		ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 
 		if (ioc4_dma & IOC4_S_DMA_STOP)
-			printk(KERN_ERR
-			       "%s(%s) : IOC4 Dma STOP bit is still 1\n",
-			       __func__, drive->name);
+			printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
+			       "still 1\n", __func__, drive->name);
 	}
 
 	ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 	if (ioc4_dma & IOC4_S_DMA_ERROR) {
-		printk(KERN_WARNING
-		       "%s(%s) : Warning!! - DMA Error during Previous"
-		       " transfer | status 0x%x\n",
+		printk(KERN_WARNING "%s(%s): Warning!! DMA Error during "
+		       "previous transfer, status 0x%x\n",
 		       __func__, drive->name, ioc4_dma);
 		writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 		ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 
 		if (ioc4_dma & IOC4_S_DMA_STOP)
-			printk(KERN_ERR
-			       "%s(%s) : IOC4 DMA STOP bit is still 1\n",
-			       __func__, drive->name);
+			printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
+			       "still 1\n", __func__, drive->name);
 	}
 
 	/* Address of the Scatter Gather List */
@@ -408,20 +396,22 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
 	/* Address of the Ending DMA */
 	memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
 	ending_dma_addr = cpu_to_le32(hwif->extra_base);
-	writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
+	writel(ending_dma_addr, (void __iomem *)(dma_base +
+						 IOC4_DMA_END_ADDR * 4));
 
 	writel(dma_direction, (void __iomem *)ioc4_dma_addr);
 }
 
-/* IOC4 Scatter Gather list Format 					 */
+/* IOC4 Scatter Gather list Format					 */
 /* 128 Bit entries to support 64 bit addresses in the future		 */
 /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format	 */
 /* --------------------------------------------------------------------- */
-/* | Upper 32 bits - Zero           |	 	Lower 32 bits- address | */
+/* | Upper 32 bits - Zero	    |		Lower 32 bits- address | */
 /* --------------------------------------------------------------------- */
 /* | Upper 32 bits - Zero	    |EOL| 15 unused     | 16 Bit Length| */
 /* --------------------------------------------------------------------- */
-/* Creates the scatter gather list, DMA Table */
+/* Creates the scatter gather list, DMA Table				 */
+
 static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -448,8 +438,10 @@ static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 				if (bcount > cur_len)
 					bcount = cur_len;
 
-				/* put the addr, length in
-				 * the IOC4 dma-table format */
+				/*
+				 * Put the address, length in
+				 * the IOC4 dma-table format
+				 */
 				*table = 0x0;
 				table++;
 				*table = cpu_to_be32(cur_addr);
@@ -540,8 +532,7 @@ static const struct ide_port_info sgiioc4_port_info __devinitconst = {
 	.mwdma_mask		= ATA_MWDMA2_ONLY,
 };
 
-static int __devinit
-sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
+static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 {
 	unsigned long cmd_base, irqport;
 	unsigned long bar0, cmd_phys_base, ctl;
@@ -549,7 +540,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	struct ide_hw hw, *hws[] = { &hw };
 	int rc;
 
-	/*  Get the CmdBlk and CtrlBlk Base Registers */
+	/* Get the CmdBlk and CtrlBlk base registers */
 	bar0 = pci_resource_start(dev, 0);
 	virt_base = pci_ioremap_bar(dev, 0);
 	if (virt_base == NULL) {
@@ -557,9 +548,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 				DRV_NAME, bar0);
 		return -ENOMEM;
 	}
-	cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
-	ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
-	irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
+	cmd_base = (unsigned long)virt_base + IOC4_CMD_OFFSET;
+	ctl = (unsigned long)virt_base + IOC4_CTRL_OFFSET;
+	irqport = (unsigned long)virt_base + IOC4_INTR_OFFSET;
 
 	cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
 	if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
@@ -577,7 +568,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	hw.irq = dev->irq;
 	hw.dev = &dev->dev;
 
-	/* Initializing chipset IRQ Registers */
+	/* Initialize chipset IRQ registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
 	rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
@@ -590,8 +581,7 @@ req_mem_rgn_err:
 	return rc;
 }
 
-static unsigned int __devinit
-pci_init_sgiioc4(struct pci_dev *dev)
+static unsigned int __devinit pci_init_sgiioc4(struct pci_dev *dev)
 {
 	int ret;
 
@@ -611,10 +601,10 @@ out:
 	return ret;
 }
 
-int __devinit
-ioc4_ide_attach_one(struct ioc4_driver_data *idd)
+int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 {
-	/* PCI-RT does not bring out IDE connection.
+	/*
+	 * PCI-RT does not bring out IDE connection.
 	 * Do not attach to this particular IOC4.
 	 */
 	if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
@@ -627,7 +617,6 @@ static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
 	.is_name = "IOC4_ide",
 	.is_owner = THIS_MODULE,
 	.is_probe = ioc4_ide_attach_one,
-/*	.is_remove = ioc4_ide_remove_one,	*/
 };
 
 static int __init ioc4_ide_init(void)
-- 
cgit v1.2.3


From 53b987d5e7e8d5be3b84522149907fa7ac95526e Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:52:55 +0200
Subject: ide: call clear_irq() method in ide_timer_expiry()

Now the clear_irq() method is called only from ide_intr() but ide_timer_expiry()
also should call this method in case when drive_is_ready() succeeds...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-io.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 272cc38f6dbe..c569d56eadc6 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -685,6 +685,9 @@ void ide_timer_expiry (unsigned long data)
 				hwif->dma_ops->dma_lost_irq(drive);
 			if (hwif->ack_intr)
 				hwif->ack_intr(hwif);
+			if (hwif->port_ops && hwif->port_ops->clear_irq)
+				hwif->port_ops->clear_irq(drive);
+
 			printk(KERN_WARNING "%s: lost interrupt\n",
 				drive->name);
 			startstop = handler(drive);
-- 
cgit v1.2.3


From 30e5ffc368ff7d96fbc7a51ede10809642b0a6df Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:52:56 +0200
Subject: cmd64x: implement clear_irq() method (take 2)

Convert the driver's two dma_end() methods into clear_irq() methods -- the
driver will now use the standard dma_end() method implementation, ide_dma_end().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/cmd64x.c | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index 80b777e4247b..9f5cde7a731a 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -7,7 +7,7 @@
  * Copyright (C) 1998		David S. Miller (davem@redhat.com)
  *
  * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2007		MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007,2009	MontaVista Software, Inc. <source@mvista.com>
  */
 
 #include <linux/module.h>
@@ -226,11 +226,11 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		(void) pci_write_config_byte(dev, pciU, regU);
 }
 
-static int cmd648_dma_end(ide_drive_t *drive)
+static void cmd648_clear_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
-	int err			= ide_dma_end(drive);
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long base	= pci_resource_start(dev, 4);
 	u8  irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
 						  MRDMODE_INTR_CH0;
 	u8  mrdmode		= inb(base + 1);
@@ -238,11 +238,9 @@ static int cmd648_dma_end(ide_drive_t *drive)
 	/* clear the interrupt bit */
 	outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
 	     base + 1);
-
-	return err;
 }
 
-static int cmd64x_dma_end(ide_drive_t *drive)
+static void cmd64x_clear_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
@@ -250,13 +248,10 @@ static int cmd64x_dma_end(ide_drive_t *drive)
 	u8  irq_mask		= hwif->channel ? ARTTIM23_INTR_CH1 :
 						  CFR_INTR_CH0;
 	u8  irq_stat		= 0;
-	int err			= ide_dma_end(drive);
 
 	(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
 	/* clear the interrupt bit */
 	(void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask);
-
-	return err;
 }
 
 static int cmd648_dma_test_irq(ide_drive_t *drive)
@@ -370,6 +365,14 @@ static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
 static const struct ide_port_ops cmd64x_port_ops = {
 	.set_pio_mode		= cmd64x_set_pio_mode,
 	.set_dma_mode		= cmd64x_set_dma_mode,
+	.clear_irq		= cmd64x_clear_irq,
+	.cable_detect		= cmd64x_cable_detect,
+};
+
+static const struct ide_port_ops cmd648_port_ops = {
+	.set_pio_mode		= cmd64x_set_pio_mode,
+	.set_dma_mode		= cmd64x_set_dma_mode,
+	.clear_irq		= cmd648_clear_irq,
 	.cable_detect		= cmd64x_cable_detect,
 };
 
@@ -377,7 +380,7 @@ static const struct ide_dma_ops cmd64x_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
 	.dma_start		= ide_dma_start,
-	.dma_end		= cmd64x_dma_end,
+	.dma_end		= ide_dma_end,
 	.dma_test_irq		= cmd64x_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
@@ -399,7 +402,7 @@ static const struct ide_dma_ops cmd648_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
 	.dma_start		= ide_dma_start,
-	.dma_end		= cmd648_dma_end,
+	.dma_end		= ide_dma_end,
 	.dma_test_irq		= cmd648_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
@@ -423,7 +426,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
+		.port_ops	= &cmd648_port_ops,
 		.dma_ops	= &cmd648_dma_ops,
 		.host_flags	= IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_ABUSE_PREFETCH,
@@ -435,7 +438,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
+		.port_ops	= &cmd648_port_ops,
 		.dma_ops	= &cmd648_dma_ops,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
@@ -446,7 +449,7 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.port_ops	= &cmd64x_port_ops,
+		.port_ops	= &cmd648_port_ops,
 		.dma_ops	= &cmd648_dma_ops,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
@@ -484,6 +487,7 @@ static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_devic
 			 */
 			if (dev->revision < 3) {
 				d.enablebits[0].reg = 0;
+				d.port_ops = &cmd64x_port_ops;
 				if (dev->revision == 1)
 					d.dma_ops = &cmd646_rev1_dma_ops;
 				else
-- 
cgit v1.2.3


From 74414a91204ee57528041f771da1fd1ee3ba64c4 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:52:57 +0200
Subject: siimage: use ide_dma_test_irq() (take 2)

Remove interrupt bit test (not trusted anyway) from siimage_io_dma_test_irq()
and siimage_mmio_dma_test_irq() -- this allows to replace the former function
with now identical ide_dma_test_irq()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/siimage.c | 27 +--------------------------
 1 file changed, 1 insertion(+), 26 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index 6a643fdf0e6e..af4fe7c48a01 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -338,26 +338,6 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	sil_iowrite16(dev, ultra, ua);
 }
 
-/* returns 1 if dma irq issued, 0 otherwise */
-static int siimage_io_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	u8 dma_altstat		= 0;
-	unsigned long addr	= siimage_selreg(hwif, 1);
-
-	/* return 1 if INTR asserted */
-	if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4)
-		return 1;
-
-	/* return 1 if Device INTR asserted */
-	pci_read_config_byte(dev, addr, &dma_altstat);
-	if (dma_altstat & 8)
-		return 0;	/* return 1; */
-
-	return 0;
-}
-
 /**
  *	siimage_mmio_dma_test_irq	-	check we caused an IRQ
  *	@drive: drive we are testing
@@ -369,7 +349,6 @@ static int siimage_io_dma_test_irq(ide_drive_t *drive)
 static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long addr	= siimage_selreg(hwif, 0x1);
 	void __iomem *sata_error_addr
 		= (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
 
@@ -398,10 +377,6 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
 	if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
 		return 1;
 
-	/* return 1 if Device INTR asserted */
-	if (readb((void __iomem *)addr) & 8)
-		return 0;	/* return 1; */
-
 	return 0;
 }
 
@@ -410,7 +385,7 @@ static int siimage_dma_test_irq(ide_drive_t *drive)
 	if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
 		return siimage_mmio_dma_test_irq(drive);
 	else
-		return siimage_io_dma_test_irq(drive);
+		return ide_dma_test_irq(drive);
 }
 
 /**
-- 
cgit v1.2.3


From eba8999cefb6b61704d8fa825b7694825a087765 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:52:57 +0200
Subject: ide: move IRQ clearing from ack_intr() method to clear_irq() method
 (take 2)

There are now two methods that clear the port interrupt: ack_intr() method,
implemented only on M680x0 machines, that is called at the start of ide_intr(),
and clear_irq() method, that is called somewhat later in this function.  In
order to stop this duplication, delegate the task of clearing the interrupt
to clear_irq() method, only leaving to ack_intr() the task of testing for the
port interrupt.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/buddha.c | 27 +++++++++++++--------------
 drivers/ide/gayle.c  | 23 +++++++++++------------
 drivers/ide/ide-io.c |  2 --
 drivers/ide/macide.c | 18 ++++++++++++++----
 4 files changed, 38 insertions(+), 32 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
index e3c6a5913305..9cd7b115763d 100644
--- a/drivers/ide/buddha.c
+++ b/drivers/ide/buddha.c
@@ -109,16 +109,12 @@ static int buddha_ack_intr(ide_hwif_t *hwif)
     return 1;
 }
 
-static int xsurf_ack_intr(ide_hwif_t *hwif)
+static void xsurf_clear_irq(ide_drive_t *drive)
 {
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports.irq_addr);
-    /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */
-    z_writeb(0, hwif->io_ports.irq_addr);
-    if (!(ch & 0x80))
-	    return 0;
-    return 1;
+    /*
+     * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
+     */
+    z_writeb(0, drive->hwif->io_ports.irq_addr);
 }
 
 static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
@@ -141,6 +137,10 @@ static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops xsurf_port_ops = {
+	.clear_irq		= xsurf_clear_irq,
+};
+
 static const struct ide_port_info buddha_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
@@ -161,6 +161,7 @@ static int __init buddha_init(void)
 	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
 		unsigned long board;
 		struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
+		struct ide_port_info d = buddha_port_info;
 
 		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
 			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
@@ -171,6 +172,7 @@ static int __init buddha_init(void)
 		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
 			buddha_num_hwifs = XSURF_NUM_HWIFS;
 			type=BOARD_XSURF;
+			d.port_ops = &xsurf_port_ops;
 		} else 
 			continue;
 		
@@ -203,28 +205,25 @@ fail_base2:
 
 		for (i = 0; i < buddha_num_hwifs; i++) {
 			unsigned long base, ctl, irq_port;
-			ide_ack_intr_t *ack_intr;
 
 			if (type != BOARD_XSURF) {
 				base = buddha_board + buddha_bases[i];
 				ctl = base + BUDDHA_CONTROL;
 				irq_port = buddha_board + buddha_irqports[i];
-				ack_intr = buddha_ack_intr;
 			} else {
 				base = buddha_board + xsurf_bases[i];
 				/* X-Surf has no CS1* (Control/AltStat) */
 				ctl = 0;
 				irq_port = buddha_board + xsurf_irqports[i];
-				ack_intr = xsurf_ack_intr;
 			}
 
 			buddha_setup_ports(&hw[i], base, ctl, irq_port,
-					   ack_intr);
+					   buddha_ack_intr);
 
 			hws[i] = &hw[i];
 		}
 
-		ide_host_add(&buddha_port_info, hws, i, NULL);
+		ide_host_add(&d, hws, i, NULL);
 	}
 
 	return 0;
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
index 4451a6a5dfe0..c5dd1e5cca4d 100644
--- a/drivers/ide/gayle.c
+++ b/drivers/ide/gayle.c
@@ -66,7 +66,7 @@ MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
      *  Check and acknowledge the interrupt status
      */
 
-static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
+static int gayle_ack_intr(ide_hwif_t *hwif)
 {
     unsigned char ch;
 
@@ -76,16 +76,12 @@ static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
     return 1;
 }
 
-static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
+static void gayle_a1200_clear_irq(ide_drive_t *drive)
 {
-    unsigned char ch;
+    ide_hwif_t *hwif = drive->hwif;
 
-    ch = z_readb(hwif->io_ports.irq_addr);
-    if (!(ch & GAYLE_IRQ_IDE))
-	return 0;
     (void)z_readb(hwif->io_ports.status_addr);
     z_writeb(0x7c, hwif->io_ports.irq_addr);
-    return 1;
 }
 
 static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
@@ -108,6 +104,10 @@ static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops gayle_a1200_port_ops = {
+	.clear_irq		= gayle_a1200_clear_irq,
+};
+
 static const struct ide_port_info gayle_port_info = {
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_NO_DMA,
@@ -123,9 +123,9 @@ static int __init gayle_init(void)
 {
     unsigned long phys_base, res_start, res_n;
     unsigned long base, ctrlport, irqport;
-    ide_ack_intr_t *ack_intr;
     int a4000, i, rc;
     struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS];
+    struct ide_port_info d = gayle_port_info;
 
     if (!MACH_IS_AMIGA)
 	return -ENODEV;
@@ -148,11 +148,10 @@ found:
 	if (a4000) {
 	    phys_base = GAYLE_BASE_4000;
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
-	    ack_intr = gayle_ack_intr_a4000;
 	} else {
 	    phys_base = GAYLE_BASE_1200;
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
-	    ack_intr = gayle_ack_intr_a1200;
+	    d.port_ops = &gayle_a1200_port_ops;
 	}
 
 	res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
@@ -165,12 +164,12 @@ found:
 	base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
 	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
 
-	gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
+	gayle_setup_ports(&hw[i], base, ctrlport, irqport, gayle_ack_intr);
 
 	hws[i] = &hw[i];
     }
 
-    rc = ide_host_add(&gayle_port_info, hws, i, NULL);
+    rc = ide_host_add(&d, hws, i, NULL);
     if (rc)
 	release_mem_region(res_start, res_n);
 
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index c569d56eadc6..9e53efe9fb2d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -683,8 +683,6 @@ void ide_timer_expiry (unsigned long data)
 		} else if (drive_is_ready(drive)) {
 			if (drive->waiting_for_dma)
 				hwif->dma_ops->dma_lost_irq(drive);
-			if (hwif->ack_intr)
-				hwif->ack_intr(hwif);
 			if (hwif->port_ops && hwif->port_ops->clear_irq)
 				hwif->port_ops->clear_irq(drive);
 
diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c
index 1447c8c90565..05cdab35a75c 100644
--- a/drivers/ide/macide.c
+++ b/drivers/ide/macide.c
@@ -55,13 +55,16 @@ volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
 
 int macide_ack_intr(ide_hwif_t* hwif)
 {
-	if (*ide_ifr & 0x20) {
-		*ide_ifr &= ~0x20;
+	if (*ide_ifr & 0x20)
 		return 1;
-	}
 	return 0;
 }
 
+static void macide_clear_irq(ide_drive_t *drive)
+{
+	*ide_ifr &= ~0x20;
+}
+
 static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
 				      int irq, ide_ack_intr_t *ack_intr)
 {
@@ -78,7 +81,12 @@ static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops macide_port_ops = {
+	.clear_irq		= macide_clear_irq,
+};
+
 static const struct ide_port_info macide_port_info = {
+	.port_ops		= &macide_port_ops,
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
 	.chipset		= ide_generic,
@@ -97,6 +105,7 @@ static int __init macide_init(void)
 	unsigned long base;
 	int irq;
 	struct ide_hw hw, *hws[] = { &hw };
+	struct ide_port_info d = macide_port_info;
 
 	if (!MACH_IS_MAC)
 		return -ENODEV;
@@ -115,6 +124,7 @@ static int __init macide_init(void)
 	case MAC_IDE_BABOON:
 		base = BABOON_BASE;
 		ack_intr = NULL;
+		d.port_ops = NULL;
 		irq = IRQ_BABOON_1;
 		break;
 	default:
@@ -126,7 +136,7 @@ static int __init macide_init(void)
 
 	macide_setup_ports(&hw, base, irq, ack_intr);
 
-	return ide_host_add(&macide_port_info, hws, 1, NULL);
+	return ide_host_add(&d, hws, 1, NULL);
 }
 
 module_init(macide_init);
-- 
cgit v1.2.3


From f4d3ffa52a402ec9e8699571cf3811763d284459 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:52:58 +0200
Subject: ide: move ack_intr() method into 'struct ide_port_ops' (take 2)

Move the ack_intr() method into 'struct ide_port_ops', also renaming it to
test_irq() while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/buddha.c    | 15 +++++++++------
 drivers/ide/falconide.c |  1 -
 drivers/ide/gayle.c     | 14 +++++++++-----
 drivers/ide/ide-io.c    |  3 ++-
 drivers/ide/ide-probe.c |  1 -
 drivers/ide/macide.c    | 12 ++++--------
 drivers/ide/q40ide.c    |  7 ++-----
 include/linux/ide.h     | 10 +---------
 8 files changed, 27 insertions(+), 36 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
index 9cd7b115763d..ab4f169d0837 100644
--- a/drivers/ide/buddha.c
+++ b/drivers/ide/buddha.c
@@ -99,7 +99,7 @@ static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
      *  Check and acknowledge the interrupt status
      */
 
-static int buddha_ack_intr(ide_hwif_t *hwif)
+static int buddha_test_irq(ide_hwif_t *hwif)
 {
     unsigned char ch;
 
@@ -118,8 +118,7 @@ static void xsurf_clear_irq(ide_drive_t *drive)
 }
 
 static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
-				      unsigned long ctl, unsigned long irq_port,
-				      ide_ack_intr_t *ack_intr)
+				      unsigned long ctl, unsigned long irq_port)
 {
 	int i;
 
@@ -134,14 +133,19 @@ static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->io_ports.irq_addr = irq_port;
 
 	hw->irq = IRQ_AMIGA_PORTS;
-	hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops buddha_port_ops = {
+	.test_irq		= buddha_test_irq,
+};
+
 static const struct ide_port_ops xsurf_port_ops = {
 	.clear_irq		= xsurf_clear_irq,
+	.test_irq		= buddha_test_irq,
 };
 
 static const struct ide_port_info buddha_port_info = {
+	.port_ops		= &buddha_port_ops,
 	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
 	.irq_flags		= IRQF_SHARED,
 	.chipset		= ide_generic,
@@ -217,8 +221,7 @@ fail_base2:
 				irq_port = buddha_board + xsurf_irqports[i];
 			}
 
-			buddha_setup_ports(&hw[i], base, ctl, irq_port,
-					   buddha_ack_intr);
+			buddha_setup_ports(&hw[i], base, ctl, irq_port);
 
 			hws[i] = &hw[i];
 		}
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index 22fa27389c3b..a5a07ccb81a7 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -128,7 +128,6 @@ static void __init falconide_setup_ports(struct ide_hw *hw)
 	hw->io_ports.ctl_addr = ATA_HD_BASE + ATA_HD_CONTROL;
 
 	hw->irq = IRQ_MFP_IDE;
-	hw->ack_intr = NULL;
 }
 
     /*
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
index c5dd1e5cca4d..b9e517de6a82 100644
--- a/drivers/ide/gayle.c
+++ b/drivers/ide/gayle.c
@@ -66,7 +66,7 @@ MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
      *  Check and acknowledge the interrupt status
      */
 
-static int gayle_ack_intr(ide_hwif_t *hwif)
+static int gayle_test_irq(ide_hwif_t *hwif)
 {
     unsigned char ch;
 
@@ -85,8 +85,7 @@ static void gayle_a1200_clear_irq(ide_drive_t *drive)
 }
 
 static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
-				     unsigned long ctl, unsigned long irq_port,
-				     ide_ack_intr_t *ack_intr)
+				     unsigned long ctl, unsigned long irq_port)
 {
 	int i;
 
@@ -101,11 +100,15 @@ static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->io_ports.irq_addr = irq_port;
 
 	hw->irq = IRQ_AMIGA_PORTS;
-	hw->ack_intr = ack_intr;
 }
 
+static const struct ide_port_ops gayle_a4000_port_ops = {
+	.test_irq		= gayle_test_irq,
+};
+
 static const struct ide_port_ops gayle_a1200_port_ops = {
 	.clear_irq		= gayle_a1200_clear_irq,
+	.test_irq		= gayle_test_irq,
 };
 
 static const struct ide_port_info gayle_port_info = {
@@ -148,6 +151,7 @@ found:
 	if (a4000) {
 	    phys_base = GAYLE_BASE_4000;
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
+	    d.port_ops = &gayle_a4000_port_ops;
 	} else {
 	    phys_base = GAYLE_BASE_1200;
 	    irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
@@ -164,7 +168,7 @@ found:
 	base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
 	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
 
-	gayle_setup_ports(&hw[i], base, ctrlport, irqport, gayle_ack_intr);
+	gayle_setup_ports(&hw[i], base, ctrlport, irqport);
 
 	hws[i] = &hw[i];
     }
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 9e53efe9fb2d..1059f809b809 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -804,7 +804,8 @@ irqreturn_t ide_intr (int irq, void *dev_id)
 
 	spin_lock_irqsave(&hwif->lock, flags);
 
-	if (hwif->ack_intr && hwif->ack_intr(hwif) == 0)
+	if (hwif->port_ops && hwif->port_ops->test_irq &&
+	    hwif->port_ops->test_irq(hwif) == 0)
 		goto out;
 
 	handler = hwif->handler;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index fdd04bcd5568..c2e7159d7930 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1170,7 +1170,6 @@ static void ide_init_port_hw(ide_hwif_t *hwif, struct ide_hw *hw)
 	hwif->irq = hw->irq;
 	hwif->dev = hw->dev;
 	hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
-	hwif->ack_intr = hw->ack_intr;
 	hwif->config_data = hw->config;
 }
 
diff --git a/drivers/ide/macide.c b/drivers/ide/macide.c
index 05cdab35a75c..505ec43e5606 100644
--- a/drivers/ide/macide.c
+++ b/drivers/ide/macide.c
@@ -53,7 +53,7 @@
 
 volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
 
-int macide_ack_intr(ide_hwif_t* hwif)
+int macide_test_irq(ide_hwif_t *hwif)
 {
 	if (*ide_ifr & 0x20)
 		return 1;
@@ -66,7 +66,7 @@ static void macide_clear_irq(ide_drive_t *drive)
 }
 
 static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
-				      int irq, ide_ack_intr_t *ack_intr)
+				      int irq)
 {
 	int i;
 
@@ -78,11 +78,11 @@ static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->io_ports.ctl_addr = base + IDE_CONTROL;
 
 	hw->irq = irq;
-	hw->ack_intr = ack_intr;
 }
 
 static const struct ide_port_ops macide_port_ops = {
 	.clear_irq		= macide_clear_irq,
+	.test_irq		= macide_test_irq,
 };
 
 static const struct ide_port_info macide_port_info = {
@@ -101,7 +101,6 @@ static const char *mac_ide_name[] =
 
 static int __init macide_init(void)
 {
-	ide_ack_intr_t *ack_intr;
 	unsigned long base;
 	int irq;
 	struct ide_hw hw, *hws[] = { &hw };
@@ -113,17 +112,14 @@ static int __init macide_init(void)
 	switch (macintosh_config->ide_type) {
 	case MAC_IDE_QUADRA:
 		base = IDE_BASE;
-		ack_intr = macide_ack_intr;
 		irq = IRQ_NUBUS_F;
 		break;
 	case MAC_IDE_PB:
 		base = IDE_BASE;
-		ack_intr = macide_ack_intr;
 		irq = IRQ_NUBUS_C;
 		break;
 	case MAC_IDE_BABOON:
 		base = BABOON_BASE;
-		ack_intr = NULL;
 		d.port_ops = NULL;
 		irq = IRQ_BABOON_1;
 		break;
@@ -134,7 +130,7 @@ static int __init macide_init(void)
 	printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
 			 mac_ide_name[macintosh_config->ide_type - 1]);
 
-	macide_setup_ports(&hw, base, irq, ack_intr);
+	macide_setup_ports(&hw, base, irq);
 
 	return ide_host_add(&d, hws, 1, NULL);
 }
diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c
index ab49a97023d9..90786083b439 100644
--- a/drivers/ide/q40ide.c
+++ b/drivers/ide/q40ide.c
@@ -51,9 +51,7 @@ static int q40ide_default_irq(unsigned long base)
 /*
  * Addresses are pretranslated for Q40 ISA access.
  */
-static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base,
-			ide_ack_intr_t *ack_intr,
-			int irq)
+static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq)
 {
 	memset(hw, 0, sizeof(*hw));
 	/* BIG FAT WARNING: 
@@ -69,7 +67,6 @@ static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base,
 	hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
 
 	hw->irq = irq;
-	hw->ack_intr = ack_intr;
 }
 
 static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
@@ -156,7 +153,7 @@ static int __init q40ide_init(void)
 		release_region(pcide_bases[i], 8);
 		continue;
 	}
-	q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
+	q40_ide_setup_ports(&hw[i], pcide_bases[i],
 			q40ide_default_irq(pcide_bases[i]));
 
 	hws[i] = &hw[i];
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 8771d49aa874..08c91e21cf47 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -156,12 +156,6 @@ enum {
 #define REQ_PARK_HEADS		0x22
 #define REQ_UNPARK_HEADS	0x23
 
-/*
- * Check for an interrupt and acknowledge the interrupt status
- */
-struct hwif_s;
-typedef int (ide_ack_intr_t)(struct hwif_s *);
-
 /*
  * hwif_chipset_t is used to keep track of the specific hardware
  * chipset used by each IDE interface, if known.
@@ -185,7 +179,6 @@ struct ide_hw {
 	};
 
 	int		irq;			/* our irq number */
-	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
 	struct device	*dev, *parent;
 	unsigned long	config;
 };
@@ -636,6 +629,7 @@ struct ide_port_ops {
 	void	(*maskproc)(ide_drive_t *, int);
 	void	(*quirkproc)(ide_drive_t *);
 	void	(*clear_irq)(ide_drive_t *);
+	int	(*test_irq)(struct hwif_s *);
 
 	u8	(*mdma_filter)(ide_drive_t *);
 	u8	(*udma_filter)(ide_drive_t *);
@@ -701,8 +695,6 @@ typedef struct hwif_s {
 
 	struct device *dev;
 
-	ide_ack_intr_t *ack_intr;
-
 	void (*rw_disk)(ide_drive_t *, struct request *);
 
 	const struct ide_tp_ops		*tp_ops;
-- 
cgit v1.2.3


From 87441db22f95f03d4a91e2e250d88eafb1622b22 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:52:58 +0200
Subject: cmd640: implement test_irq() method

Implement test_irq() method, adding the drive 2/3 interrupt bit definition.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/cmd640.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'drivers/ide')

diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c
index 1683ed5c7329..1a32d62ed86b 100644
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -153,6 +153,7 @@ static int cmd640_vlb;
 #define ARTTIM23	0x57
 #define   ARTTIM23_DIS_RA2	0x04
 #define   ARTTIM23_DIS_RA3	0x08
+#define   ARTTIM23_IDE23INTR	0x10
 #define DRWTIM23	0x58
 #define BRST		0x59
 
@@ -629,12 +630,24 @@ static void cmd640_init_dev(ide_drive_t *drive)
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 }
 
+static int cmd640_test_irq(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	int irq_reg		= hwif->channel ? ARTTIM23 : CFR;
+	u8  irq_stat, irq_mask	= hwif->channel ? ARTTIM23_IDE23INTR :
+						  CFR_IDE01INTR;
+
+	pci_read_config_byte(dev, irq_reg, &irq_stat);
+
+	return (irq_stat & irq_mask) ? 1 : 0;
+}
 
 static const struct ide_port_ops cmd640_port_ops = {
 	.init_dev		= cmd640_init_dev,
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
 	.set_pio_mode		= cmd640_set_pio_mode,
 #endif
+	.test_irq		= cmd640_test_irq,
 };
 
 static int pci_conf1(void)
-- 
cgit v1.2.3


From 628df2f33d99dace08838779d8a02bf1deaff100 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:52:59 +0200
Subject: cmd64x: implement test_irq() method

Convert the driver's two dma_test_irq() methods into test_irq() methods. The
driver will now use the standard dma_test_irq() method implementation which
allows to remove 'cmd54x_dma_ops' and 'cmd648_dma_ops' that become identical
to 'sff_dma_ops'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/cmd64x.c | 69 +++++++++-------------------------------------------
 1 file changed, 12 insertions(+), 57 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index 9f5cde7a731a..fd904e923a9f 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -254,53 +254,34 @@ static void cmd64x_clear_irq(ide_drive_t *drive)
 	(void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask);
 }
 
-static int cmd648_dma_test_irq(ide_drive_t *drive)
+static int cmd648_test_irq(ide_hwif_t *hwif)
 {
-	ide_hwif_t *hwif	= drive->hwif;
-	unsigned long base	= hwif->dma_base - (hwif->channel * 8);
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long base	= pci_resource_start(dev, 4);
 	u8 irq_mask		= hwif->channel ? MRDMODE_INTR_CH1 :
 						  MRDMODE_INTR_CH0;
-	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 	u8 mrdmode		= inb(base + 1);
 
-#ifdef DEBUG
-	printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n",
-	       drive->name, dma_stat, mrdmode, irq_mask);
-#endif
-	if (!(mrdmode & irq_mask))
-		return 0;
+	pr_debug("%s: mrdmode: 0x%02x irq_mask: 0x%02x\n",
+		 hwif->name, mrdmode, irq_mask);
 
-	/* return 1 if INTR asserted */
-	if (dma_stat & 4)
-		return 1;
-
-	return 0;
+	return (mrdmode & irq_mask) ? 1 : 0;
 }
 
-static int cmd64x_dma_test_irq(ide_drive_t *drive)
+static int cmd64x_test_irq(ide_hwif_t *hwif)
 {
-	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	int irq_reg		= hwif->channel ? ARTTIM23 : CFR;
 	u8  irq_mask		= hwif->channel ? ARTTIM23_INTR_CH1 :
 						  CFR_INTR_CH0;
-	u8  dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 	u8  irq_stat		= 0;
 
 	(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
 
-#ifdef DEBUG
-	printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n",
-	       drive->name, dma_stat, irq_stat, irq_mask);
-#endif
-	if (!(irq_stat & irq_mask))
-		return 0;
-
-	/* return 1 if INTR asserted */
-	if (dma_stat & 4)
-		return 1;
+	pr_debug("%s: irq_stat: 0x%02x irq_mask: 0x%02x\n",
+		 hwif->name, irq_stat, irq_mask);
 
-	return 0;
+	return (irq_stat & irq_mask) ? 1 : 0;
 }
 
 /*
@@ -366,6 +347,7 @@ static const struct ide_port_ops cmd64x_port_ops = {
 	.set_pio_mode		= cmd64x_set_pio_mode,
 	.set_dma_mode		= cmd64x_set_dma_mode,
 	.clear_irq		= cmd64x_clear_irq,
+	.test_irq		= cmd64x_test_irq,
 	.cable_detect		= cmd64x_cable_detect,
 };
 
@@ -373,20 +355,10 @@ static const struct ide_port_ops cmd648_port_ops = {
 	.set_pio_mode		= cmd64x_set_pio_mode,
 	.set_dma_mode		= cmd64x_set_dma_mode,
 	.clear_irq		= cmd648_clear_irq,
+	.test_irq		= cmd648_test_irq,
 	.cable_detect		= cmd64x_cable_detect,
 };
 
-static const struct ide_dma_ops cmd64x_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_start		= ide_dma_start,
-	.dma_end		= ide_dma_end,
-	.dma_test_irq		= cmd64x_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_sff_read_status	= ide_dma_sff_read_status,
-};
-
 static const struct ide_dma_ops cmd646_rev1_dma_ops = {
 	.dma_host_set		= ide_dma_host_set,
 	.dma_setup		= ide_dma_setup,
@@ -398,24 +370,12 @@ static const struct ide_dma_ops cmd646_rev1_dma_ops = {
 	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
 
-static const struct ide_dma_ops cmd648_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ide_dma_setup,
-	.dma_start		= ide_dma_start,
-	.dma_end		= ide_dma_end,
-	.dma_test_irq		= cmd648_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_sff_read_status	= ide_dma_sff_read_status,
-};
-
 static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 	{	/* 0: CMD643 */
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
 		.port_ops	= &cmd64x_port_ops,
-		.dma_ops	= &cmd64x_dma_ops,
 		.host_flags	= IDE_HFLAG_CLEAR_SIMPLEX |
 				  IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
@@ -427,7 +387,6 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
 		.port_ops	= &cmd648_port_ops,
-		.dma_ops	= &cmd648_dma_ops,
 		.host_flags	= IDE_HFLAG_SERIALIZE |
 				  IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
@@ -439,7 +398,6 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
 		.port_ops	= &cmd648_port_ops,
-		.dma_ops	= &cmd648_dma_ops,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -450,7 +408,6 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
 		.port_ops	= &cmd648_port_ops,
-		.dma_ops	= &cmd648_dma_ops,
 		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
@@ -490,8 +447,6 @@ static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_devic
 				d.port_ops = &cmd64x_port_ops;
 				if (dev->revision == 1)
 					d.dma_ops = &cmd646_rev1_dma_ops;
-				else
-					d.dma_ops = &cmd64x_dma_ops;
 			}
 		}
 	}
-- 
cgit v1.2.3


From e0321fbe6d34b4bb514fb6daff9e0859e5d76001 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:52:59 +0200
Subject: pdc202xx_old: implement test_irq() method (take 2)

Implement test_irq() method based on the driver's former dma_test_irq() method.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pdc202xx_old.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'drivers/ide')

diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 4f5b536282af..cb812f3700e8 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -104,6 +104,27 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
 }
 
+static int pdc202xx_test_irq(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long high_16	= pci_resource_start(dev, 4);
+	u8 sc1d			= inb(high_16 + 0x1d);
+
+	if (hwif->channel) {
+		/*
+		 * bit 7: error, bit 6: interrupting,
+		 * bit 5: FIFO full, bit 4: FIFO empty
+		 */
+		return ((sc1d & 0x50) == 0x40) ? 1 : 0;
+	} else	{
+		/*
+		 * bit 3: error, bit 2: interrupting,
+		 * bit 1: FIFO full, bit 0: FIFO empty
+		 */
+		return ((sc1d & 0x05) == 0x04) ? 1 : 0;
+	}
+}
+
 static u8 pdc2026x_cable_detect(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -231,6 +252,7 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
 static const struct ide_port_ops pdc20246_port_ops = {
 	.set_pio_mode		= pdc202xx_set_pio_mode,
 	.set_dma_mode		= pdc202xx_set_mode,
+	.test_irq		= pdc202xx_test_irq,
 };
 
 static const struct ide_port_ops pdc2026x_port_ops = {
-- 
cgit v1.2.3


From ec053e4ee98b6e5a9ecf97754837b6fc989774f0 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:53:00 +0200
Subject: siimage: implement test_irq() method

Implement test_irq() method based on the driver's former dma_test_irq() methods.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/siimage.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/ide')

diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c
index af4fe7c48a01..d95df528562f 100644
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -338,6 +338,16 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	sil_iowrite16(dev, ultra, ua);
 }
 
+static int sil_test_irq(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long addr	= siimage_selreg(hwif, 1);
+	u8 val			= sil_ioread8(dev, addr);
+
+	/* Return 1 if INTRQ asserted */
+	return (val & 8) ? 1 : 0;
+}
+
 /**
  *	siimage_mmio_dma_test_irq	-	check we caused an IRQ
  *	@drive: drive we are testing
@@ -670,6 +680,7 @@ static const struct ide_port_ops sil_pata_port_ops = {
 	.set_pio_mode		= sil_set_pio_mode,
 	.set_dma_mode		= sil_set_dma_mode,
 	.quirkproc		= sil_quirkproc,
+	.test_irq		= sil_test_irq,
 	.udma_filter		= sil_pata_udma_filter,
 	.cable_detect		= sil_cable_detect,
 };
@@ -680,6 +691,7 @@ static const struct ide_port_ops sil_sata_port_ops = {
 	.reset_poll		= sil_sata_reset_poll,
 	.pre_reset		= sil_sata_pre_reset,
 	.quirkproc		= sil_quirkproc,
+	.test_irq		= sil_test_irq,
 	.udma_filter		= sil_sata_udma_filter,
 	.cable_detect		= sil_cable_detect,
 };
-- 
cgit v1.2.3


From 3779f818a42879038c4be8bc83123432b774279d Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Mon, 15 Jun 2009 18:53:00 +0200
Subject: sl82c105: implement test_irq() method

Implement test_irq() method.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/sl82c105.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/ide')

diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 88ac47085cd9..6246bea585c4 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -114,6 +114,16 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	drive->drive_data |= (unsigned long)drv_ctrl << 16;
 }
 
+static int sl82c105_test_irq(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	u32 val, mask		= hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
+
+	pci_read_config_dword(dev, 0x40, &val);
+
+	return (val & mask) ? 1 : 0;
+}
+
 /*
  * The SL82C105 holds off all IDE interrupts while in DMA mode until
  * all DMA activity is completed.  Sometimes this causes problems (eg,
@@ -288,6 +298,7 @@ static const struct ide_port_ops sl82c105_port_ops = {
 	.set_pio_mode		= sl82c105_set_pio_mode,
 	.set_dma_mode		= sl82c105_set_dma_mode,
 	.resetproc		= sl82c105_resetproc,
+	.test_irq		= sl82c105_test_irq,
 };
 
 static const struct ide_dma_ops sl82c105_dma_ops = {
-- 
cgit v1.2.3


From 5bfb151f1f565e6082304a30e8c81dfb6ed0b0c8 Mon Sep 17 00:00:00 2001
From: Joao Ramos <joao.ramos@inov.pt>
Date: Mon, 15 Jun 2009 22:13:44 +0200
Subject: ide: do not access ide_drive_t 'drive_data' field directly

Change ide_drive_t 'drive_data' field from 'unsigned int' type to 'void *'
type, allowing a wider range of values/types to be stored in this field.

Added 'ide_get_drivedata' and 'ide_set_drivedata' helpers to get and set
the 'drive_data' field.

Fixed all host drivers to maintain coherency with the change in the
'drive_data' field type.

Signed-off-by: Joao Ramos <joao.ramos@inov.pt>
[bart: fix qd65xx build, cast to 'unsigned long', minor Coding Style fixups]
Acked-by: Sergei Shtylyov <sshtylyov@ru.montavista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/cmd64x.c   |  8 +++++---
 drivers/ide/cs5536.c   | 23 +++++++++++++++--------
 drivers/ide/ht6560b.c  | 33 ++++++++++++++++++++++++---------
 drivers/ide/icside.c   | 10 ++++++----
 drivers/ide/opti621.c  |  8 +++++---
 drivers/ide/qd65xx.c   | 11 +++++++----
 drivers/ide/qd65xx.h   | 11 +++++++++--
 drivers/ide/sl82c105.c | 18 ++++++++++++------
 include/linux/ide.h    | 12 +++++++++++-
 9 files changed, 94 insertions(+), 40 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index fd904e923a9f..03c86209446f 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -118,8 +118,9 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
 	ide_hwif_t *hwif	= drive->hwif;
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct ide_timing *t	= ide_timing_find_mode(XFER_PIO_0 + pio);
+	unsigned long setup_count;
 	unsigned int cycle_time;
-	u8 setup_count, arttim = 0;
+	u8 arttim = 0;
 
 	static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
 	static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
@@ -140,10 +141,11 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
 	if (hwif->channel) {
 		ide_drive_t *pair = ide_get_pair_dev(drive);
 
-		drive->drive_data = setup_count;
+		ide_set_drivedata(drive, (void *)setup_count);
 
 		if (pair)
-			setup_count = max_t(u8, setup_count, pair->drive_data);
+			setup_count = max_t(u8, setup_count,
+					(unsigned long)ide_get_drivedata(pair));
 	}
 
 	if (setup_count > 5)		/* shouldn't actually happen... */
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index 0332a95eefd4..9623b852c616 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -146,14 +146,16 @@ static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
 	ide_drive_t *pair = ide_get_pair_dev(drive);
 	int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u32 cast;
 	u8 cmd_pio = pio;
 
 	if (pair)
 		cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4));
 
-	drive->drive_data &= (IDE_DRV_MASK << 8);
-	drive->drive_data |= drv_timings[pio];
+	timings &= (IDE_DRV_MASK << 8);
+	timings |= drv_timings[pio];
+	ide_set_drivedata(drive, (void *)timings);
 
 	cs5536_program_dtc(drive, drv_timings[pio]);
 
@@ -186,6 +188,7 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
 
 	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
 	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u32 etc;
 
 	cs5536_read(pdev, ETC, &etc);
@@ -195,8 +198,9 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
 		etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
 	} else { /* MWDMA */
 		etc &= ~(IDE_ETC_UDMA_MASK << dshift);
-		drive->drive_data &= IDE_DRV_MASK;
-		drive->drive_data |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
+		timings &= IDE_DRV_MASK;
+		timings |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
+		ide_set_drivedata(drive, (void *)timings);
 	}
 
 	cs5536_write(pdev, ETC, etc);
@@ -204,9 +208,11 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
 
 static void cs5536_dma_start(ide_drive_t *drive)
 {
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
+
 	if (drive->current_speed < XFER_UDMA_0 &&
-	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
-		cs5536_program_dtc(drive, drive->drive_data >> 8);
+	    (timings >> 8) != (timings & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, timings >> 8);
 
 	ide_dma_start(drive);
 }
@@ -214,10 +220,11 @@ static void cs5536_dma_start(ide_drive_t *drive)
 static int cs5536_dma_end(ide_drive_t *drive)
 {
 	int ret = ide_dma_end(drive);
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 
 	if (drive->current_speed < XFER_UDMA_0 &&
-	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
-		cs5536_program_dtc(drive, drive->drive_data & IDE_DRV_MASK);
+	    (timings >> 8) != (timings & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, timings & IDE_DRV_MASK);
 
 	return ret;
 }
diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
index 2fb0f2965009..aafed8060e17 100644
--- a/drivers/ide/ht6560b.c
+++ b/drivers/ide/ht6560b.c
@@ -44,7 +44,12 @@
  *    bit3 (0x08): "1" 3 cycle time, "0" 2 cycle time	      (?)
  */
 #define HT_CONFIG_PORT	  0x3e6
-#define HT_CONFIG(drivea) (u8)(((drivea)->drive_data & 0xff00) >> 8)
+
+static inline u8 HT_CONFIG(ide_drive_t *drive)
+{
+	return ((unsigned long)ide_get_drivedata(drive) & 0xff00) >> 8;
+}
+
 /*
  * FIFO + PREFETCH (both a/b-model)
  */
@@ -90,7 +95,11 @@
  * Active Time for each drive. Smaller value gives higher speed.
  * In case of failures you should probably fall back to a higher value.
  */
-#define HT_TIMING(drivea) (u8)((drivea)->drive_data & 0x00ff)
+static inline u8 HT_TIMING(ide_drive_t *drive)
+{
+	return (unsigned long)ide_get_drivedata(drive) & 0x00ff;
+}
+
 #define HT_TIMING_DEFAULT 0xff
 
 /*
@@ -242,23 +251,27 @@ static DEFINE_SPINLOCK(ht6560b_lock);
  */
 static void ht_set_prefetch(ide_drive_t *drive, u8 state)
 {
-	unsigned long flags;
+	unsigned long flags, config;
 	int t = HT_PREFETCH_MODE << 8;
 
 	spin_lock_irqsave(&ht6560b_lock, flags);
 
+	config = (unsigned long)ide_get_drivedata(drive);
+
 	/*
 	 *  Prefetch mode and unmask irq seems to conflict
 	 */
 	if (state) {
-		drive->drive_data |= t;   /* enable prefetch mode */
+		config |= t;   /* enable prefetch mode */
 		drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
 		drive->dev_flags &= ~IDE_DFLAG_UNMASK;
 	} else {
-		drive->drive_data &= ~t;  /* disable prefetch mode */
+		config &= ~t;  /* disable prefetch mode */
 		drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
 	}
 
+	ide_set_drivedata(drive, (void *)config);
+
 	spin_unlock_irqrestore(&ht6560b_lock, flags);
 
 #ifdef DEBUG
@@ -268,7 +281,7 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state)
 
 static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
-	unsigned long flags;
+	unsigned long flags, config;
 	u8 timing;
 	
 	switch (pio) {
@@ -281,8 +294,10 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	timing = ht_pio2timings(drive, pio);
 
 	spin_lock_irqsave(&ht6560b_lock, flags);
-	drive->drive_data &= 0xff00;
-	drive->drive_data |= timing;
+	config = (unsigned long)ide_get_drivedata(drive);
+	config &= 0xff00;
+	config |= timing;
+	ide_set_drivedata(drive, (void *)config);
 	spin_unlock_irqrestore(&ht6560b_lock, flags);
 
 #ifdef DEBUG
@@ -299,7 +314,7 @@ static void __init ht6560b_init_dev(ide_drive_t *drive)
 	if (hwif->channel)
 		t |= (HT_SECONDARY_IF << 8);
 
-	drive->drive_data = t;
+	ide_set_drivedata(drive, (void *)t);
 }
 
 static int probe_ht6560b;
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 5af3d0ffaf0a..0f67f1abbbd3 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -187,7 +187,8 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
  */
 static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
 {
-	int cycle_time, use_dma_info = 0;
+	unsigned long cycle_time;
+	int use_dma_info = 0;
 
 	switch (xfer_mode) {
 	case XFER_MW_DMA_2:
@@ -218,10 +219,11 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
 	if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time)
 		cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME];
 
-	drive->drive_data = cycle_time;
+	ide_set_drivedata(drive, (void *)cycle_time);
 
 	printk("%s: %s selected (peak %dMB/s)\n", drive->name,
-		ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
+		ide_xfer_verbose(xfer_mode),
+		2000 / (unsigned long)ide_get_drivedata(drive));
 }
 
 static const struct ide_port_ops icside_v6_port_ops = {
@@ -277,7 +279,7 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 	/*
 	 * Select the correct timing for this drive.
 	 */
-	set_dma_speed(ec->dma, drive->drive_data);
+	set_dma_speed(ec->dma, (unsigned long)ide_get_drivedata(drive));
 
 	/*
 	 * Tell the DMA engine about the SG table and
diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c
index 6048eda3cd61..f1d70d6630fe 100644
--- a/drivers/ide/opti621.c
+++ b/drivers/ide/opti621.c
@@ -138,6 +138,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *pair = ide_get_pair_dev(drive);
 	unsigned long flags;
+	unsigned long mode = XFER_PIO_0 + pio, pair_mode;
 	u8 tim, misc, addr_pio = pio, clk;
 
 	/* DRDY is default 2 (by OPTi Databook) */
@@ -150,11 +151,12 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		{ 0x48, 0x34, 0x21, 0x10, 0x10 }	/* 25 MHz */
 	};
 
-	drive->drive_data = XFER_PIO_0 + pio;
+	ide_set_drivedata(drive, (void *)mode);
 
 	if (pair) {
-		if (pair->drive_data && pair->drive_data < drive->drive_data)
-			addr_pio = pair->drive_data - XFER_PIO_0;
+		pair_mode = (unsigned long)ide_get_drivedata(pair);
+		if (pair_mode && pair_mode < mode)
+			addr_pio = pair_mode - XFER_PIO_0;
 	}
 
 	spin_lock_irqsave(&opti621_lock, flags);
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
index c9a134986891..74696edc8d1d 100644
--- a/drivers/ide/qd65xx.c
+++ b/drivers/ide/qd65xx.c
@@ -180,8 +180,11 @@ static int qd_find_disk_type (ide_drive_t *drive,
 
 static void qd_set_timing (ide_drive_t *drive, u8 timing)
 {
-	drive->drive_data &= 0xff00;
-	drive->drive_data |= timing;
+	unsigned long data = (unsigned long)ide_get_drivedata(drive);
+
+	data &= 0xff00;
+	data |= timing;
+	ide_set_drivedata(drive, (void *)data);
 
 	printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
 }
@@ -292,7 +295,7 @@ static void __init qd6500_init_dev(ide_drive_t *drive)
 	u8 base = (hwif->config_data & 0xff00) >> 8;
 	u8 config = QD_CONFIG(hwif);
 
-	drive->drive_data = QD6500_DEF_DATA;
+	ide_set_drivedata(drive, (void *)QD6500_DEF_DATA);
 }
 
 static void __init qd6580_init_dev(ide_drive_t *drive)
@@ -308,7 +311,7 @@ static void __init qd6580_init_dev(ide_drive_t *drive)
 	} else
 		t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
 
-	drive->drive_data = (drive->dn & 1) ? t2 : t1;
+	ide_set_drivedata(drive, (void *)((drive->dn & 1) ? t2 : t1));
 }
 
 static const struct ide_tp_ops qd65xx_tp_ops = {
diff --git a/drivers/ide/qd65xx.h b/drivers/ide/qd65xx.h
index d7e67a1a1dcc..1fba2a5f281c 100644
--- a/drivers/ide/qd65xx.h
+++ b/drivers/ide/qd65xx.h
@@ -31,8 +31,15 @@
 
 #define QD_CONFIG(hwif)		((hwif)->config_data & 0x00ff)
 
-#define QD_TIMING(drive)	(u8)(((drive)->drive_data) & 0x00ff)
-#define QD_TIMREG(drive)	(u8)((((drive)->drive_data) & 0xff00) >> 8)
+static inline u8 QD_TIMING(ide_drive_t *drive)
+{
+	return (unsigned long)ide_get_drivedata(drive) & 0x00ff;
+}
+
+static inline u8 QD_TIMREG(ide_drive_t *drive)
+{
+	return ((unsigned long)ide_get_drivedata(drive) & 0xff00) >> 8;
+}
 
 #define QD6500_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0c : 0x08))
 #define QD6580_DEF_DATA		((QD_TIM1_PORT<<8) | (QD_ID3 ? 0x0a : 0x00))
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 6246bea585c4..d698da470d6f 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -73,6 +73,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
 static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	struct pci_dev *dev	= to_pci_dev(drive->hwif->dev);
+	unsigned long timings	= (unsigned long)ide_get_drivedata(drive);
 	int reg			= 0x44 + drive->dn * 4;
 	u16 drv_ctrl;
 
@@ -82,8 +83,9 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	 * Store the PIO timings so that we can restore them
 	 * in case DMA will be turned off...
 	 */
-	drive->drive_data &= 0xffff0000;
-	drive->drive_data |= drv_ctrl;
+	timings &= 0xffff0000;
+	timings |= drv_ctrl;
+	ide_set_drivedata(drive, (void *)timings);
 
 	pci_write_config_word(dev, reg,  drv_ctrl);
 	pci_read_config_word (dev, reg, &drv_ctrl);
@@ -99,6 +101,7 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
 static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
 	static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
+	unsigned long timings = (unsigned long)ide_get_drivedata(drive);
 	u16 drv_ctrl;
 
  	DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
@@ -110,8 +113,9 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	 * Store the DMA timings so that we can actually program
 	 * them when DMA will be turned on...
 	 */
-	drive->drive_data &= 0x0000ffff;
-	drive->drive_data |= (unsigned long)drv_ctrl << 16;
+	timings &= 0x0000ffff;
+	timings |= (unsigned long)drv_ctrl << 16;
+	ide_set_drivedata(drive, (void *)timings);
 }
 
 static int sl82c105_test_irq(ide_hwif_t *hwif)
@@ -194,7 +198,8 @@ static void sl82c105_dma_start(ide_drive_t *drive)
 
 	DBG(("%s(drive:%s)\n", __func__, drive->name));
 
-	pci_write_config_word(dev, reg, drive->drive_data >> 16);
+	pci_write_config_word(dev, reg,
+			      (unsigned long)ide_get_drivedata(drive) >> 16);
 
 	sl82c105_reset_host(dev);
 	ide_dma_start(drive);
@@ -219,7 +224,8 @@ static int sl82c105_dma_end(ide_drive_t *drive)
 
 	ret = ide_dma_end(drive);
 
-	pci_write_config_word(dev, reg, drive->drive_data);
+	pci_write_config_word(dev, reg,
+			      (unsigned long)ide_get_drivedata(drive));
 
 	return ret;
 }
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 08c91e21cf47..95c6e00a72e8 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -532,7 +532,7 @@ struct ide_drive_s {
 
 	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
 	unsigned int	cyl;		/* "real" number of cyls */
-	unsigned int	drive_data;	/* used by set_pio_mode/dev_select() */
+	void		*drive_data;	/* used by set_pio_mode/dev_select() */
 	unsigned int	failures;	/* current failure count */
 	unsigned int	max_failures;	/* maximum allowed failure count */
 	u64		probed_capacity;/* initial/native media capacity */
@@ -1550,6 +1550,16 @@ static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
 	return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
 }
 
+static inline void *ide_get_drivedata(ide_drive_t *drive)
+{
+	return drive->drive_data;
+}
+
+static inline void ide_set_drivedata(ide_drive_t *drive, void *data)
+{
+	drive->drive_data = data;
+}
+
 #define ide_port_for_each_dev(i, dev, port) \
 	for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
 
-- 
cgit v1.2.3


From a9c415090710a108edcd81b3392b90396f190a9a Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 15 Jun 2009 22:13:45 +0200
Subject: ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl
 handler

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-ioctls.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 5991b23793f2..82f252c3ee6e 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -118,7 +118,6 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg)
 	u8 args[4], xfer_rate = 0;
 	struct ide_cmd cmd;
 	struct ide_taskfile *tf = &cmd.tf;
-	u16 *id = drive->id;
 
 	if (NULL == (void *) arg) {
 		struct request *rq;
@@ -161,14 +160,10 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg)
 
 	if (tf->command == ATA_CMD_SET_FEATURES &&
 	    tf->feature == SETFEATURES_XFER &&
-	    tf->nsect >= XFER_SW_DMA_0 &&
-	    (id[ATA_ID_UDMA_MODES] ||
-	     id[ATA_ID_MWDMA_MODES] ||
-	     id[ATA_ID_SWDMA_MODES])) {
-		xfer_rate = args[1];
-		if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) {
-			printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
-					    "be set\n", drive->name);
+	    tf->nsect >= XFER_SW_DMA_0) {
+		xfer_rate = ide_find_dma_mode(drive, XFER_UDMA_6);
+		if (xfer_rate != tf->nsect) {
+			err = -EINVAL;
 			goto abort;
 		}
 	}
-- 
cgit v1.2.3


From 2c7eaa43c3bb7b3b9fe2051d17f308c1f0728c78 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 15 Jun 2009 22:16:10 +0200
Subject: ide: BUG() on unknown requests

Unsupported requests should be never handed down to device drivers
and the best thing we can do upon discovering such request inside
driver's ->do_request method is to just BUG().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c     |  8 ++------
 drivers/ide/ide-disk.c   |  9 +--------
 drivers/ide/ide-floppy.c |  6 ++----
 drivers/ide/ide-tape.c   | 10 +---------
 4 files changed, 6 insertions(+), 27 deletions(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index dcd72445b0cd..0b7645b13df1 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -785,12 +785,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 		/* right now this can only be a reset... */
 		uptodate = 1;
 		goto out_end;
-	} else {
-		blk_dump_rq_flags(rq, DRV_NAME " bad flags");
-		if (rq->errors == 0)
-			rq->errors = -EIO;
-		goto out_end;
-	}
+	} else
+		BUG();
 
 	/* prepare sense request for this command */
 	ide_prep_sense(drive, rq);
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 6a1de2169709..695181120cdb 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -184,14 +184,7 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
 	ide_hwif_t *hwif = drive->hwif;
 
 	BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
-
-	if (!blk_fs_request(rq)) {
-		blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
-		if (rq->errors == 0)
-			rq->errors = -EIO;
-		ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
-		return ide_stopped;
-	}
+	BUG_ON(!blk_fs_request(rq));
 
 	ledtrig_ide_activity();
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 800c83a9db83..8b3f204f7d73 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -269,10 +269,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
 	} else if (blk_pc_request(rq)) {
 		pc = &floppy->queued_pc;
 		idefloppy_blockpc_cmd(floppy, pc, rq);
-	} else {
-		blk_dump_rq_flags(rq, PFX "unsupported command in queue");
-		goto out_end;
-	}
+	} else
+		BUG();
 
 	ide_prep_sense(drive, rq);
 
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 3a3f10f3f8fe..013dc595fab6 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -586,15 +586,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
 	debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n"
 		  (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq));
 
-	if (!(blk_special_request(rq) || blk_sense_request(rq))) {
-		/* We do not support buffer cache originated requests. */
-		printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
-			"request queue (%d)\n", drive->name, rq->cmd_type);
-		if (blk_fs_request(rq) == 0 && rq->errors == 0)
-			rq->errors = -EIO;
-		ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
-		return ide_stopped;
-	}
+	BUG_ON(!(blk_special_request(rq) || blk_sense_request(rq)));
 
 	/* Retry a failed packet command */
 	if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
-- 
cgit v1.2.3


From 39c58f37a10198054c656c28202fb1e6d22fd505 Mon Sep 17 00:00:00 2001
From: Rainer Weikusat <rweikusat@mssgmbh.com>
Date: Thu, 18 Jun 2009 17:04:00 +0200
Subject: ide-cd: prevent null pointer deref via cdrom_newpc_intr

With 2.6.30, the error handling code in cdrom_newpc_intr was changed
to deal with partial request failures by normally completing the 'good'
parts of a request and only 'error' the last (and presumably,
incompletely transferred) bio associated with a particular
request. In order to do this, ide_complete_rq is called over
ide_cd_error_cmd() to partially complete the rq. The block layer
does partial completion only for requests with bio's and if the
rq doesn't have one (eg 'GPCMD_READ_DISC_INFO') the request is
completed as a whole and the drive->hwif->rq pointer set to NULL
afterwards. When calling ide_complete_rq again to report
the error, this null pointer is derefenced, resulting in a kernel
crash.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13399.

Signed-off-by: Rainer Weikusat <rweikusat@mssgmbh.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/ide')

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 0b7645b13df1..4a19686fcfe9 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -667,7 +667,7 @@ out_end:
 				rq->errors = -EIO;
 		}
 
-		if (uptodate == 0)
+		if (uptodate == 0 && rq->bio)
 			ide_cd_error_cmd(drive, cmd);
 
 		/* make sure it's fully ended */
-- 
cgit v1.2.3