From 0c0d06cac63ee327ceaab4b5ffe2206574ab86bd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Aug 2012 00:13:22 -0300 Subject: [media] rename most media/video usb drivers to media/usb Rename all USB drivers with their own directory under drivers/media/video into drivers/media/usb and update the building system. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/usbvision/Kconfig | 12 + drivers/media/usb/usbvision/Makefile | 6 + drivers/media/usb/usbvision/usbvision-cards.c | 1133 +++++++++++ drivers/media/usb/usbvision/usbvision-cards.h | 69 + drivers/media/usb/usbvision/usbvision-core.c | 2518 +++++++++++++++++++++++++ drivers/media/usb/usbvision/usbvision-i2c.c | 456 +++++ drivers/media/usb/usbvision/usbvision-video.c | 1720 +++++++++++++++++ drivers/media/usb/usbvision/usbvision.h | 535 ++++++ 8 files changed, 6449 insertions(+) create mode 100644 drivers/media/usb/usbvision/Kconfig create mode 100644 drivers/media/usb/usbvision/Makefile create mode 100644 drivers/media/usb/usbvision/usbvision-cards.c create mode 100644 drivers/media/usb/usbvision/usbvision-cards.h create mode 100644 drivers/media/usb/usbvision/usbvision-core.c create mode 100644 drivers/media/usb/usbvision/usbvision-i2c.c create mode 100644 drivers/media/usb/usbvision/usbvision-video.c create mode 100644 drivers/media/usb/usbvision/usbvision.h (limited to 'drivers/media/usb/usbvision') diff --git a/drivers/media/usb/usbvision/Kconfig b/drivers/media/usb/usbvision/Kconfig new file mode 100644 index 000000000000..fc24ef05b3f3 --- /dev/null +++ b/drivers/media/usb/usbvision/Kconfig @@ -0,0 +1,12 @@ +config VIDEO_USBVISION + tristate "USB video devices based on Nogatech NT1003/1004/1005" + depends on I2C && VIDEO_V4L2 + select VIDEO_TUNER + select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO + ---help--- + There are more than 50 different USB video devices based on + NT1003/1004/1005 USB Bridges. This driver enables using those + devices. + + To compile this driver as a module, choose M here: the + module will be called usbvision. diff --git a/drivers/media/usb/usbvision/Makefile b/drivers/media/usb/usbvision/Makefile new file mode 100644 index 000000000000..d55c6bd97a35 --- /dev/null +++ b/drivers/media/usb/usbvision/Makefile @@ -0,0 +1,6 @@ +usbvision-objs := usbvision-core.o usbvision-video.o usbvision-i2c.o usbvision-cards.o + +obj-$(CONFIG_VIDEO_USBVISION) += usbvision.o + +ccflags-y += -Idrivers/media/video +ccflags-y += -Idrivers/media/tuners diff --git a/drivers/media/usb/usbvision/usbvision-cards.c b/drivers/media/usb/usbvision/usbvision-cards.c new file mode 100644 index 000000000000..3103d0d020e8 --- /dev/null +++ b/drivers/media/usb/usbvision/usbvision-cards.c @@ -0,0 +1,1133 @@ +/* + * usbvision-cards.c + * usbvision cards definition file + * + * Copyright (c) 1999-2005 Joerg Heckenbach + * + * This module is part of usbvision driver project. + * Updates to driver completed by Dwaine P. Garden + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include "usbvision.h" +#include "usbvision-cards.h" + +/* Supported Devices: A table for usbvision.c*/ +struct usbvision_device_data_st usbvision_device_data[] = { + [XANBOO] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 4, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = -1, + .y_offset = -1, + .model_string = "Xanboo", + }, + [BELKIN_VIDEOBUS_II] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Belkin USB VideoBus II Adapter", + }, + [BELKIN_VIDEOBUS] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 2, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = -1, + .y_offset = -1, + .model_string = "Belkin Components USB VideoBus", + }, + [BELKIN_USB_VIDEOBUS_II] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Belkin USB VideoBus II", + }, + [ECHOFX_INTERVIEW_LITE] = { + .interface = 0, + .codec = CODEC_SAA7111, + .video_channels = 2, + .video_norm = V4L2_STD_PAL, + .audio_channels = 0, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = -1, + .y_offset = -1, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "echoFX InterView Lite", + }, + [USBGEAR_USBG_V1] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 2, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = -1, + .y_offset = -1, + .model_string = "USBGear USBG-V1 resp. HAMA USB", + }, + [D_LINK_V100] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 4, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 0, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "D-Link V100", + }, + [X10_USB_CAMERA] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 2, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = -1, + .y_offset = -1, + .model_string = "X10 USB Camera", + }, + [HPG_WINTV_LIVE_PAL_BG] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 2, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = -1, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Live (PAL B/G)", + }, + [HPG_WINTV_LIVE_PRO_NTSC_MN] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 0, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Live Pro (NTSC M/N)", + }, + [ZORAN_PMD_NOGATECH] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_PAL, + .audio_channels = 2, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Zoran Co. PMD (Nogatech) AV-grabber Manhattan", + }, + [NOGATECH_USB_TV_NTSC_FM] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = -1, + .y_offset = 20, + .model_string = "Nogatech USB-TV (NTSC) FM", + }, + [PNY_USB_TV_NTSC_FM] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = -1, + .y_offset = 20, + .model_string = "PNY USB-TV (NTSC) FM", + }, + [PV_PLAYTV_USB_PRO_PAL_FM] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "PixelView PlayTv-USB PRO (PAL) FM", + }, + [ZT_721] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "ZTV ZT-721 2.4GHz USB A/V Receiver", + }, + [HPG_WINTV_NTSC_MN] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = -1, + .y_offset = 20, + .model_string = "Hauppauge WinTV USB (NTSC M/N)", + }, + [HPG_WINTV_PAL_BG] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = -1, + .y_offset = -1, + .model_string = "Hauppauge WinTV USB (PAL B/G)", + }, + [HPG_WINTV_PAL_I] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = -1, + .y_offset = -1, + .model_string = "Hauppauge WinTV USB (PAL I)", + }, + [HPG_WINTV_PAL_SECAM_L] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_SECAM, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_SECAM, + .x_offset = 0x80, + .y_offset = 0x16, + .model_string = "Hauppauge WinTV USB (PAL/SECAM L)", + }, + [HPG_WINTV_PAL_D_K] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = -1, + .y_offset = -1, + .model_string = "Hauppauge WinTV USB (PAL D/K)", + }, + [HPG_WINTV_NTSC_FM] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = -1, + .y_offset = -1, + .model_string = "Hauppauge WinTV USB (NTSC FM)", + }, + [HPG_WINTV_PAL_BG_FM] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = -1, + .y_offset = -1, + .model_string = "Hauppauge WinTV USB (PAL B/G FM)", + }, + [HPG_WINTV_PAL_I_FM] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = -1, + .y_offset = -1, + .model_string = "Hauppauge WinTV USB (PAL I FM)", + }, + [HPG_WINTV_PAL_D_K_FM] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = -1, + .y_offset = -1, + .model_string = "Hauppauge WinTV USB (PAL D/K FM)", + }, + [HPG_WINTV_PRO_NTSC_MN] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_MICROTUNE_4049FM5, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (NTSC M/N)", + }, + [HPG_WINTV_PRO_NTSC_MN_V2] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_MICROTUNE_4049FM5, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (NTSC M/N) V2", + }, + [HPG_WINTV_PRO_PAL] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L)", + }, + [HPG_WINTV_PRO_NTSC_MN_V3] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (NTSC M/N) V3", + }, + [HPG_WINTV_PRO_PAL_BG] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL B/G)", + }, + [HPG_WINTV_PRO_PAL_I] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL I)", + }, + [HPG_WINTV_PRO_PAL_SECAM_L] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_SECAM, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_SECAM, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL/SECAM L)", + }, + [HPG_WINTV_PRO_PAL_D_K] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL D/K)", + }, + [HPG_WINTV_PRO_PAL_SECAM] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_SECAM, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_SECAM, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L)", + }, + [HPG_WINTV_PRO_PAL_SECAM_V2] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_SECAM, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_SECAM, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2", + }, + [HPG_WINTV_PRO_PAL_BG_V2] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_ALPS_TSBE1_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL B/G) V2", + }, + [HPG_WINTV_PRO_PAL_BG_D_K] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_ALPS_TSBE1_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL B/G,D/K)", + }, + [HPG_WINTV_PRO_PAL_I_D_K] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL I,D/K)", + }, + [HPG_WINTV_PRO_NTSC_MN_FM] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (NTSC M/N FM)", + }, + [HPG_WINTV_PRO_PAL_BG_FM] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL B/G FM)", + }, + [HPG_WINTV_PRO_PAL_I_FM] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL I FM)", + }, + [HPG_WINTV_PRO_PAL_D_K_FM] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL D/K FM)", + }, + [HPG_WINTV_PRO_TEMIC_PAL_FM] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_MICROTUNE_4049FM5, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM)", + }, + [HPG_WINTV_PRO_TEMIC_PAL_BG_FM] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_MICROTUNE_4049FM5, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (Temic PAL B/G FM)", + }, + [HPG_WINTV_PRO_PAL_FM] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM)", + }, + [HPG_WINTV_PRO_NTSC_MN_FM_V2] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Hauppauge WinTV USB Pro (NTSC M/N FM) V2", + }, + [CAMTEL_TVB330] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = 5, + .y_offset = 5, + .model_string = "Camtel Technology USB TV Genie Pro FM Model TVB330", + }, + [DIGITAL_VIDEO_CREATOR_I] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_PAL, + .audio_channels = 0, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Digital Video Creator I", + }, + [GLOBAL_VILLAGE_GV_007_NTSC] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 2, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 0, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 82, + .y_offset = 20, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Global Village GV-007 (NTSC)", + }, + [DAZZLE_DVC_50_REV_1_NTSC] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 0, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Dazzle Fusion Model DVC-50 Rev 1 (NTSC)", + }, + [DAZZLE_DVC_80_REV_1_PAL] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_PAL, + .audio_channels = 0, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Dazzle Fusion Model DVC-80 Rev 1 (PAL)", + }, + [DAZZLE_DVC_90_REV_1_SECAM] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_SECAM, + .audio_channels = 0, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)", + }, + [ESKAPE_LABS_MYTV2GO] = { + .interface = 0, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Eskape Labs MyTV2Go", + }, + [PINNA_PCTV_USB_PAL] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 0, + .tuner = 1, + .tuner_type = TUNER_TEMIC_4066FY5_PAL_I, + .x_offset = -1, + .y_offset = -1, + .model_string = "Pinnacle Studio PCTV USB (PAL)", + }, + [PINNA_PCTV_USB_SECAM] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_SECAM, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_SECAM, + .x_offset = -1, + .y_offset = -1, + .model_string = "Pinnacle Studio PCTV USB (SECAM)", + }, + [PINNA_PCTV_USB_PAL_FM] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = 128, + .y_offset = 23, + .model_string = "Pinnacle Studio PCTV USB (PAL) FM", + }, + [MIRO_PCTV_USB] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .x_offset = -1, + .y_offset = -1, + .model_string = "Miro PCTV USB", + }, + [PINNA_PCTV_USB_NTSC_FM] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = -1, + .y_offset = -1, + .model_string = "Pinnacle Studio PCTV USB (NTSC) FM", + }, + [PINNA_PCTV_USB_NTSC_FM_V3] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = -1, + .y_offset = -1, + .model_string = "Pinnacle Studio PCTV USB (NTSC) FM V3", + }, + [PINNA_PCTV_USB_PAL_FM_V2] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_TEMIC_4009FR5_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Pinnacle Studio PCTV USB (PAL) FM V2", + }, + [PINNA_PCTV_USB_NTSC_FM_V2] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_TEMIC_4039FR5_NTSC, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Pinnacle Studio PCTV USB (NTSC) FM V2", + }, + [PINNA_PCTV_USB_PAL_FM_V3] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_TEMIC_4009FR5_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Pinnacle Studio PCTV USB (PAL) FM V3", + }, + [PINNA_LINX_VD_IN_CAB_NTSC] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Pinnacle Studio Linx Video input cable (NTSC)", + }, + [PINNA_LINX_VD_IN_CAB_PAL] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 2, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 0, + .tuner_type = 0, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Pinnacle Studio Linx Video input cable (PAL)", + }, + [PINNA_PCTV_BUNGEE_PAL_FM] = { + .interface = -1, + .codec = CODEC_SAA7113, + .video_channels = 3, + .video_norm = V4L2_STD_PAL, + .audio_channels = 1, + .radio = 1, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_TEMIC_4009FR5_PAL, + .x_offset = 0, + .y_offset = 3, + .dvi_yuv_override = 1, + .dvi_yuv = 7, + .model_string = "Pinnacle PCTV Bungee USB (PAL) FM", + }, + [HPG_WINTV] = { + .interface = -1, + .codec = CODEC_SAA7111, + .video_channels = 3, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 1, + .radio = 0, + .vbi = 1, + .tuner = 1, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .x_offset = -1, + .y_offset = -1, + .model_string = "Hauppauge WinTv-USB", + }, + [MICROCAM_NTSC] = { + .interface = -1, + .codec = CODEC_WEBCAM, + .video_channels = 1, + .video_norm = V4L2_STD_NTSC, + .audio_channels = 0, + .radio = 0, + .vbi = 0, + .tuner = 0, + .tuner_type = 0, + .x_offset = 71, + .y_offset = 15, + .model_string = "Nogatech USB MicroCam NTSC (NV3000N)", + }, + [MICROCAM_PAL] = { + .interface = -1, + .codec = CODEC_WEBCAM, + .video_channels = 1, + .video_norm = V4L2_STD_PAL, + .audio_channels = 0, + .radio = 0, + .vbi = 0, + .tuner = 0, + .tuner_type = 0, + .x_offset = 71, + .y_offset = 18, + .model_string = "Nogatech USB MicroCam PAL (NV3001P)", + }, +}; +const int usbvision_device_data_size = ARRAY_SIZE(usbvision_device_data); + +/* Supported Devices */ + +struct usb_device_id usbvision_table[] = { + { USB_DEVICE(0x0a6f, 0x0400), .driver_info = XANBOO }, + { USB_DEVICE(0x050d, 0x0106), .driver_info = BELKIN_VIDEOBUS_II }, + { USB_DEVICE(0x050d, 0x0207), .driver_info = BELKIN_VIDEOBUS }, + { USB_DEVICE(0x050d, 0x0208), .driver_info = BELKIN_USB_VIDEOBUS_II }, + { USB_DEVICE(0x0571, 0x0002), .driver_info = ECHOFX_INTERVIEW_LITE }, + { USB_DEVICE(0x0573, 0x0003), .driver_info = USBGEAR_USBG_V1 }, + { USB_DEVICE(0x0573, 0x0400), .driver_info = D_LINK_V100 }, + { USB_DEVICE(0x0573, 0x2000), .driver_info = X10_USB_CAMERA }, + { USB_DEVICE(0x0573, 0x2d00), .driver_info = HPG_WINTV_LIVE_PAL_BG }, + { USB_DEVICE(0x0573, 0x2d01), .driver_info = HPG_WINTV_LIVE_PRO_NTSC_MN }, + { USB_DEVICE(0x0573, 0x2101), .driver_info = ZORAN_PMD_NOGATECH }, + { USB_DEVICE(0x0573, 0x3000), .driver_info = MICROCAM_NTSC }, + { USB_DEVICE(0x0573, 0x3001), .driver_info = MICROCAM_PAL }, + { USB_DEVICE(0x0573, 0x4100), .driver_info = NOGATECH_USB_TV_NTSC_FM }, + { USB_DEVICE(0x0573, 0x4110), .driver_info = PNY_USB_TV_NTSC_FM }, + { USB_DEVICE(0x0573, 0x4450), .driver_info = PV_PLAYTV_USB_PRO_PAL_FM }, + { USB_DEVICE(0x0573, 0x4550), .driver_info = ZT_721 }, + { USB_DEVICE(0x0573, 0x4d00), .driver_info = HPG_WINTV_NTSC_MN }, + { USB_DEVICE(0x0573, 0x4d01), .driver_info = HPG_WINTV_PAL_BG }, + { USB_DEVICE(0x0573, 0x4d02), .driver_info = HPG_WINTV_PAL_I }, + { USB_DEVICE(0x0573, 0x4d03), .driver_info = HPG_WINTV_PAL_SECAM_L }, + { USB_DEVICE(0x0573, 0x4d04), .driver_info = HPG_WINTV_PAL_D_K }, + { USB_DEVICE(0x0573, 0x4d10), .driver_info = HPG_WINTV_NTSC_FM }, + { USB_DEVICE(0x0573, 0x4d11), .driver_info = HPG_WINTV_PAL_BG_FM }, + { USB_DEVICE(0x0573, 0x4d12), .driver_info = HPG_WINTV_PAL_I_FM }, + { USB_DEVICE(0x0573, 0x4d14), .driver_info = HPG_WINTV_PAL_D_K_FM }, + { USB_DEVICE(0x0573, 0x4d2a), .driver_info = HPG_WINTV_PRO_NTSC_MN }, + { USB_DEVICE(0x0573, 0x4d2b), .driver_info = HPG_WINTV_PRO_NTSC_MN_V2 }, + { USB_DEVICE(0x0573, 0x4d2c), .driver_info = HPG_WINTV_PRO_PAL }, + { USB_DEVICE(0x0573, 0x4d20), .driver_info = HPG_WINTV_PRO_NTSC_MN_V3 }, + { USB_DEVICE(0x0573, 0x4d21), .driver_info = HPG_WINTV_PRO_PAL_BG }, + { USB_DEVICE(0x0573, 0x4d22), .driver_info = HPG_WINTV_PRO_PAL_I }, + { USB_DEVICE(0x0573, 0x4d23), .driver_info = HPG_WINTV_PRO_PAL_SECAM_L }, + { USB_DEVICE(0x0573, 0x4d24), .driver_info = HPG_WINTV_PRO_PAL_D_K }, + { USB_DEVICE(0x0573, 0x4d25), .driver_info = HPG_WINTV_PRO_PAL_SECAM }, + { USB_DEVICE(0x0573, 0x4d26), .driver_info = HPG_WINTV_PRO_PAL_SECAM_V2 }, + { USB_DEVICE(0x0573, 0x4d27), .driver_info = HPG_WINTV_PRO_PAL_BG_V2 }, + { USB_DEVICE(0x0573, 0x4d28), .driver_info = HPG_WINTV_PRO_PAL_BG_D_K }, + { USB_DEVICE(0x0573, 0x4d29), .driver_info = HPG_WINTV_PRO_PAL_I_D_K }, + { USB_DEVICE(0x0573, 0x4d30), .driver_info = HPG_WINTV_PRO_NTSC_MN_FM }, + { USB_DEVICE(0x0573, 0x4d31), .driver_info = HPG_WINTV_PRO_PAL_BG_FM }, + { USB_DEVICE(0x0573, 0x4d32), .driver_info = HPG_WINTV_PRO_PAL_I_FM }, + { USB_DEVICE(0x0573, 0x4d34), .driver_info = HPG_WINTV_PRO_PAL_D_K_FM }, + { USB_DEVICE(0x0573, 0x4d35), .driver_info = HPG_WINTV_PRO_TEMIC_PAL_FM }, + { USB_DEVICE(0x0573, 0x4d36), .driver_info = HPG_WINTV_PRO_TEMIC_PAL_BG_FM }, + { USB_DEVICE(0x0573, 0x4d37), .driver_info = HPG_WINTV_PRO_PAL_FM }, + { USB_DEVICE(0x0573, 0x4d38), .driver_info = HPG_WINTV_PRO_NTSC_MN_FM_V2 }, + { USB_DEVICE(0x0768, 0x0006), .driver_info = CAMTEL_TVB330 }, + { USB_DEVICE(0x07d0, 0x0001), .driver_info = DIGITAL_VIDEO_CREATOR_I }, + { USB_DEVICE(0x07d0, 0x0002), .driver_info = GLOBAL_VILLAGE_GV_007_NTSC }, + { USB_DEVICE(0x07d0, 0x0003), .driver_info = DAZZLE_DVC_50_REV_1_NTSC }, + { USB_DEVICE(0x07d0, 0x0004), .driver_info = DAZZLE_DVC_80_REV_1_PAL }, + { USB_DEVICE(0x07d0, 0x0005), .driver_info = DAZZLE_DVC_90_REV_1_SECAM }, + { USB_DEVICE(0x07f8, 0x9104), .driver_info = ESKAPE_LABS_MYTV2GO }, + { USB_DEVICE(0x2304, 0x010d), .driver_info = PINNA_PCTV_USB_PAL }, + { USB_DEVICE(0x2304, 0x0109), .driver_info = PINNA_PCTV_USB_SECAM }, + { USB_DEVICE(0x2304, 0x0110), .driver_info = PINNA_PCTV_USB_PAL_FM }, + { USB_DEVICE(0x2304, 0x0111), .driver_info = MIRO_PCTV_USB }, + { USB_DEVICE(0x2304, 0x0112), .driver_info = PINNA_PCTV_USB_NTSC_FM }, + { USB_DEVICE(0x2304, 0x0113), .driver_info = PINNA_PCTV_USB_NTSC_FM_V3 }, + { USB_DEVICE(0x2304, 0x0210), .driver_info = PINNA_PCTV_USB_PAL_FM_V2 }, + { USB_DEVICE(0x2304, 0x0212), .driver_info = PINNA_PCTV_USB_NTSC_FM_V2 }, + { USB_DEVICE(0x2304, 0x0214), .driver_info = PINNA_PCTV_USB_PAL_FM_V3 }, + { USB_DEVICE(0x2304, 0x0300), .driver_info = PINNA_LINX_VD_IN_CAB_NTSC }, + { USB_DEVICE(0x2304, 0x0301), .driver_info = PINNA_LINX_VD_IN_CAB_PAL }, + { USB_DEVICE(0x2304, 0x0419), .driver_info = PINNA_PCTV_BUNGEE_PAL_FM }, + { USB_DEVICE(0x2400, 0x4200), .driver_info = HPG_WINTV }, + { }, /* terminate list */ +}; + +MODULE_DEVICE_TABLE(usb, usbvision_table); diff --git a/drivers/media/usb/usbvision/usbvision-cards.h b/drivers/media/usb/usbvision/usbvision-cards.h new file mode 100644 index 000000000000..a51cc1185cce --- /dev/null +++ b/drivers/media/usb/usbvision/usbvision-cards.h @@ -0,0 +1,69 @@ +#define XANBOO 0 +#define BELKIN_VIDEOBUS_II 1 +#define BELKIN_VIDEOBUS 2 +#define BELKIN_USB_VIDEOBUS_II 3 +#define ECHOFX_INTERVIEW_LITE 4 +#define USBGEAR_USBG_V1 5 +#define D_LINK_V100 6 +#define X10_USB_CAMERA 7 +#define HPG_WINTV_LIVE_PAL_BG 8 +#define HPG_WINTV_LIVE_PRO_NTSC_MN 9 +#define ZORAN_PMD_NOGATECH 10 +#define NOGATECH_USB_TV_NTSC_FM 11 +#define PNY_USB_TV_NTSC_FM 12 +#define PV_PLAYTV_USB_PRO_PAL_FM 13 +#define ZT_721 14 +#define HPG_WINTV_NTSC_MN 15 +#define HPG_WINTV_PAL_BG 16 +#define HPG_WINTV_PAL_I 17 +#define HPG_WINTV_PAL_SECAM_L 18 +#define HPG_WINTV_PAL_D_K 19 +#define HPG_WINTV_NTSC_FM 20 +#define HPG_WINTV_PAL_BG_FM 21 +#define HPG_WINTV_PAL_I_FM 22 +#define HPG_WINTV_PAL_D_K_FM 23 +#define HPG_WINTV_PRO_NTSC_MN 24 +#define HPG_WINTV_PRO_NTSC_MN_V2 25 +#define HPG_WINTV_PRO_PAL 26 +#define HPG_WINTV_PRO_NTSC_MN_V3 27 +#define HPG_WINTV_PRO_PAL_BG 28 +#define HPG_WINTV_PRO_PAL_I 29 +#define HPG_WINTV_PRO_PAL_SECAM_L 30 +#define HPG_WINTV_PRO_PAL_D_K 31 +#define HPG_WINTV_PRO_PAL_SECAM 32 +#define HPG_WINTV_PRO_PAL_SECAM_V2 33 +#define HPG_WINTV_PRO_PAL_BG_V2 34 +#define HPG_WINTV_PRO_PAL_BG_D_K 35 +#define HPG_WINTV_PRO_PAL_I_D_K 36 +#define HPG_WINTV_PRO_NTSC_MN_FM 37 +#define HPG_WINTV_PRO_PAL_BG_FM 38 +#define HPG_WINTV_PRO_PAL_I_FM 39 +#define HPG_WINTV_PRO_PAL_D_K_FM 40 +#define HPG_WINTV_PRO_TEMIC_PAL_FM 41 +#define HPG_WINTV_PRO_TEMIC_PAL_BG_FM 42 +#define HPG_WINTV_PRO_PAL_FM 43 +#define HPG_WINTV_PRO_NTSC_MN_FM_V2 44 +#define CAMTEL_TVB330 45 +#define DIGITAL_VIDEO_CREATOR_I 46 +#define GLOBAL_VILLAGE_GV_007_NTSC 47 +#define DAZZLE_DVC_50_REV_1_NTSC 48 +#define DAZZLE_DVC_80_REV_1_PAL 49 +#define DAZZLE_DVC_90_REV_1_SECAM 50 +#define ESKAPE_LABS_MYTV2GO 51 +#define PINNA_PCTV_USB_PAL 52 +#define PINNA_PCTV_USB_SECAM 53 +#define PINNA_PCTV_USB_PAL_FM 54 +#define MIRO_PCTV_USB 55 +#define PINNA_PCTV_USB_NTSC_FM 56 +#define PINNA_PCTV_USB_PAL_FM_V2 57 +#define PINNA_PCTV_USB_NTSC_FM_V2 58 +#define PINNA_PCTV_USB_PAL_FM_V3 59 +#define PINNA_LINX_VD_IN_CAB_NTSC 60 +#define PINNA_LINX_VD_IN_CAB_PAL 61 +#define PINNA_PCTV_BUNGEE_PAL_FM 62 +#define HPG_WINTV 63 +#define PINNA_PCTV_USB_NTSC_FM_V3 64 +#define MICROCAM_NTSC 65 +#define MICROCAM_PAL 66 + +extern const int usbvision_device_data_size; diff --git a/drivers/media/usb/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c new file mode 100644 index 000000000000..c9b2042f8bdf --- /dev/null +++ b/drivers/media/usb/usbvision/usbvision-core.c @@ -0,0 +1,2518 @@ +/* + * usbvision-core.c - driver for NT100x USB video capture devices + * + * + * Copyright (c) 1999-2005 Joerg Heckenbach + * Dwaine Garden + * + * This module is part of usbvision driver project. + * Updates to driver completed by Dwaine P. Garden + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "usbvision.h" + +static unsigned int core_debug; +module_param(core_debug, int, 0644); +MODULE_PARM_DESC(core_debug, "enable debug messages [core]"); + +static int adjust_compression = 1; /* Set the compression to be adaptive */ +module_param(adjust_compression, int, 0444); +MODULE_PARM_DESC(adjust_compression, " Set the ADPCM compression for the device. Default: 1 (On)"); + +/* To help people with Black and White output with using s-video input. + * Some cables and input device are wired differently. */ +static int switch_svideo_input; +module_param(switch_svideo_input, int, 0444); +MODULE_PARM_DESC(switch_svideo_input, " Set the S-Video input. Some cables and input device are wired differently. Default: 0 (Off)"); + +static unsigned int adjust_x_offset = -1; +module_param(adjust_x_offset, int, 0644); +MODULE_PARM_DESC(adjust_x_offset, "adjust X offset display [core]"); + +static unsigned int adjust_y_offset = -1; +module_param(adjust_y_offset, int, 0644); +MODULE_PARM_DESC(adjust_y_offset, "adjust Y offset display [core]"); + + +#define ENABLE_HEXDUMP 0 /* Enable if you need it */ + + +#ifdef USBVISION_DEBUG + #define PDEBUG(level, fmt, args...) { \ + if (core_debug & (level)) \ + printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ + __func__, __LINE__ , ## args); \ + } +#else + #define PDEBUG(level, fmt, args...) do {} while (0) +#endif + +#define DBG_HEADER (1 << 0) +#define DBG_IRQ (1 << 1) +#define DBG_ISOC (1 << 2) +#define DBG_PARSE (1 << 3) +#define DBG_SCRATCH (1 << 4) +#define DBG_FUNC (1 << 5) + +static const int max_imgwidth = MAX_FRAME_WIDTH; +static const int max_imgheight = MAX_FRAME_HEIGHT; +static const int min_imgwidth = MIN_FRAME_WIDTH; +static const int min_imgheight = MIN_FRAME_HEIGHT; + +/* The value of 'scratch_buf_size' affects quality of the picture + * in many ways. Shorter buffers may cause loss of data when client + * is too slow. Larger buffers are memory-consuming and take longer + * to work with. This setting can be adjusted, but the default value + * should be OK for most desktop users. + */ +#define DEFAULT_SCRATCH_BUF_SIZE (0x20000) /* 128kB memory scratch buffer */ +static const int scratch_buf_size = DEFAULT_SCRATCH_BUF_SIZE; + +/* Function prototypes */ +static int usbvision_request_intra(struct usb_usbvision *usbvision); +static int usbvision_unrequest_intra(struct usb_usbvision *usbvision); +static int usbvision_adjust_compression(struct usb_usbvision *usbvision); +static int usbvision_measure_bandwidth(struct usb_usbvision *usbvision); + +/*******************************/ +/* Memory management functions */ +/*******************************/ + +/* + * Here we want the physical address of the memory. + * This is used when initializing the contents of the area. + */ + +static void *usbvision_rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void usbvision_rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + size = PAGE_ALIGN(size); + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vfree(mem); +} + + +#if ENABLE_HEXDUMP +static void usbvision_hexdump(const unsigned char *data, int len) +{ + char tmp[80]; + int i, k; + + for (i = k = 0; len > 0; i++, len--) { + if (i > 0 && (i % 16 == 0)) { + printk("%s\n", tmp); + k = 0; + } + k += sprintf(&tmp[k], "%02x ", data[i]); + } + if (k > 0) + printk(KERN_CONT "%s\n", tmp); +} +#endif + +/******************************** + * scratch ring buffer handling + ********************************/ +static int scratch_len(struct usb_usbvision *usbvision) /* This returns the amount of data actually in the buffer */ +{ + int len = usbvision->scratch_write_ptr - usbvision->scratch_read_ptr; + + if (len < 0) + len += scratch_buf_size; + PDEBUG(DBG_SCRATCH, "scratch_len() = %d\n", len); + + return len; +} + + +/* This returns the free space left in the buffer */ +static int scratch_free(struct usb_usbvision *usbvision) +{ + int free = usbvision->scratch_read_ptr - usbvision->scratch_write_ptr; + if (free <= 0) + free += scratch_buf_size; + if (free) { + free -= 1; /* at least one byte in the buffer must */ + /* left blank, otherwise there is no chance to differ between full and empty */ + } + PDEBUG(DBG_SCRATCH, "return %d\n", free); + + return free; +} + + +/* This puts data into the buffer */ +static int scratch_put(struct usb_usbvision *usbvision, unsigned char *data, + int len) +{ + int len_part; + + if (usbvision->scratch_write_ptr + len < scratch_buf_size) { + memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len); + usbvision->scratch_write_ptr += len; + } else { + len_part = scratch_buf_size - usbvision->scratch_write_ptr; + memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len_part); + if (len == len_part) { + usbvision->scratch_write_ptr = 0; /* just set write_ptr to zero */ + } else { + memcpy(usbvision->scratch, data + len_part, len - len_part); + usbvision->scratch_write_ptr = len - len_part; + } + } + + PDEBUG(DBG_SCRATCH, "len=%d, new write_ptr=%d\n", len, usbvision->scratch_write_ptr); + + return len; +} + +/* This marks the write_ptr as position of new frame header */ +static void scratch_mark_header(struct usb_usbvision *usbvision) +{ + PDEBUG(DBG_SCRATCH, "header at write_ptr=%d\n", usbvision->scratch_headermarker_write_ptr); + + usbvision->scratch_headermarker[usbvision->scratch_headermarker_write_ptr] = + usbvision->scratch_write_ptr; + usbvision->scratch_headermarker_write_ptr += 1; + usbvision->scratch_headermarker_write_ptr %= USBVISION_NUM_HEADERMARKER; +} + +/* This gets data from the buffer at the given "ptr" position */ +static int scratch_get_extra(struct usb_usbvision *usbvision, + unsigned char *data, int *ptr, int len) +{ + int len_part; + + if (*ptr + len < scratch_buf_size) { + memcpy(data, usbvision->scratch + *ptr, len); + *ptr += len; + } else { + len_part = scratch_buf_size - *ptr; + memcpy(data, usbvision->scratch + *ptr, len_part); + if (len == len_part) { + *ptr = 0; /* just set the y_ptr to zero */ + } else { + memcpy(data + len_part, usbvision->scratch, len - len_part); + *ptr = len - len_part; + } + } + + PDEBUG(DBG_SCRATCH, "len=%d, new ptr=%d\n", len, *ptr); + + return len; +} + + +/* This sets the scratch extra read pointer */ +static void scratch_set_extra_ptr(struct usb_usbvision *usbvision, int *ptr, + int len) +{ + *ptr = (usbvision->scratch_read_ptr + len) % scratch_buf_size; + + PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr); +} + + +/* This increments the scratch extra read pointer */ +static void scratch_inc_extra_ptr(int *ptr, int len) +{ + *ptr = (*ptr + len) % scratch_buf_size; + + PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr); +} + + +/* This gets data from the buffer */ +static int scratch_get(struct usb_usbvision *usbvision, unsigned char *data, + int len) +{ + int len_part; + + if (usbvision->scratch_read_ptr + len < scratch_buf_size) { + memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len); + usbvision->scratch_read_ptr += len; + } else { + len_part = scratch_buf_size - usbvision->scratch_read_ptr; + memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len_part); + if (len == len_part) { + usbvision->scratch_read_ptr = 0; /* just set the read_ptr to zero */ + } else { + memcpy(data + len_part, usbvision->scratch, len - len_part); + usbvision->scratch_read_ptr = len - len_part; + } + } + + PDEBUG(DBG_SCRATCH, "len=%d, new read_ptr=%d\n", len, usbvision->scratch_read_ptr); + + return len; +} + + +/* This sets read pointer to next header and returns it */ +static int scratch_get_header(struct usb_usbvision *usbvision, + struct usbvision_frame_header *header) +{ + int err_code = 0; + + PDEBUG(DBG_SCRATCH, "from read_ptr=%d", usbvision->scratch_headermarker_read_ptr); + + while (usbvision->scratch_headermarker_write_ptr - + usbvision->scratch_headermarker_read_ptr != 0) { + usbvision->scratch_read_ptr = + usbvision->scratch_headermarker[usbvision->scratch_headermarker_read_ptr]; + usbvision->scratch_headermarker_read_ptr += 1; + usbvision->scratch_headermarker_read_ptr %= USBVISION_NUM_HEADERMARKER; + scratch_get(usbvision, (unsigned char *)header, USBVISION_HEADER_LENGTH); + if ((header->magic_1 == USBVISION_MAGIC_1) + && (header->magic_2 == USBVISION_MAGIC_2) + && (header->header_length == USBVISION_HEADER_LENGTH)) { + err_code = USBVISION_HEADER_LENGTH; + header->frame_width = header->frame_width_lo + (header->frame_width_hi << 8); + header->frame_height = header->frame_height_lo + (header->frame_height_hi << 8); + break; + } + } + + return err_code; +} + + +/* This removes len bytes of old data from the buffer */ +static void scratch_rm_old(struct usb_usbvision *usbvision, int len) +{ + usbvision->scratch_read_ptr += len; + usbvision->scratch_read_ptr %= scratch_buf_size; + PDEBUG(DBG_SCRATCH, "read_ptr is now %d\n", usbvision->scratch_read_ptr); +} + + +/* This resets the buffer - kills all data in it too */ +static void scratch_reset(struct usb_usbvision *usbvision) +{ + PDEBUG(DBG_SCRATCH, "\n"); + + usbvision->scratch_read_ptr = 0; + usbvision->scratch_write_ptr = 0; + usbvision->scratch_headermarker_read_ptr = 0; + usbvision->scratch_headermarker_write_ptr = 0; + usbvision->isocstate = isoc_state_no_frame; +} + +int usbvision_scratch_alloc(struct usb_usbvision *usbvision) +{ + usbvision->scratch = vmalloc_32(scratch_buf_size); + scratch_reset(usbvision); + if (usbvision->scratch == NULL) { + dev_err(&usbvision->dev->dev, + "%s: unable to allocate %d bytes for scratch\n", + __func__, scratch_buf_size); + return -ENOMEM; + } + return 0; +} + +void usbvision_scratch_free(struct usb_usbvision *usbvision) +{ + vfree(usbvision->scratch); + usbvision->scratch = NULL; +} + +/* + * usbvision_decompress_alloc() + * + * allocates intermediate buffer for decompression + */ +int usbvision_decompress_alloc(struct usb_usbvision *usbvision) +{ + int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2; + + usbvision->intra_frame_buffer = vmalloc_32(IFB_size); + if (usbvision->intra_frame_buffer == NULL) { + dev_err(&usbvision->dev->dev, + "%s: unable to allocate %d for compr. frame buffer\n", + __func__, IFB_size); + return -ENOMEM; + } + return 0; +} + +/* + * usbvision_decompress_free() + * + * frees intermediate buffer for decompression + */ +void usbvision_decompress_free(struct usb_usbvision *usbvision) +{ + vfree(usbvision->intra_frame_buffer); + usbvision->intra_frame_buffer = NULL; + +} + +/************************************************************ + * Here comes the data parsing stuff that is run as interrupt + ************************************************************/ +/* + * usbvision_find_header() + * + * Locate one of supported header markers in the scratch buffer. + */ +static enum parse_state usbvision_find_header(struct usb_usbvision *usbvision) +{ + struct usbvision_frame *frame; + int found_header = 0; + + frame = usbvision->cur_frame; + + while (scratch_get_header(usbvision, &frame->isoc_header) == USBVISION_HEADER_LENGTH) { + /* found header in scratch */ + PDEBUG(DBG_HEADER, "found header: 0x%02x%02x %d %d %d %d %#x 0x%02x %u %u", + frame->isoc_header.magic_2, + frame->isoc_header.magic_1, + frame->isoc_header.header_length, + frame->isoc_header.frame_num, + frame->isoc_header.frame_phase, + frame->isoc_header.frame_latency, + frame->isoc_header.data_format, + frame->isoc_header.format_param, + frame->isoc_header.frame_width, + frame->isoc_header.frame_height); + + if (usbvision->request_intra) { + if (frame->isoc_header.format_param & 0x80) { + found_header = 1; + usbvision->last_isoc_frame_num = -1; /* do not check for lost frames this time */ + usbvision_unrequest_intra(usbvision); + break; + } + } else { + found_header = 1; + break; + } + } + + if (found_header) { + frame->frmwidth = frame->isoc_header.frame_width * usbvision->stretch_width; + frame->frmheight = frame->isoc_header.frame_height * usbvision->stretch_height; + frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth) >> 3; + } else { /* no header found */ + PDEBUG(DBG_HEADER, "skipping scratch data, no header"); + scratch_reset(usbvision); + return parse_state_end_parse; + } + + /* found header */ + if (frame->isoc_header.data_format == ISOC_MODE_COMPRESS) { + /* check isoc_header.frame_num for lost frames */ + if (usbvision->last_isoc_frame_num >= 0) { + if (((usbvision->last_isoc_frame_num + 1) % 32) != frame->isoc_header.frame_num) { + /* unexpected frame drop: need to request new intra frame */ + PDEBUG(DBG_HEADER, "Lost frame before %d on USB", frame->isoc_header.frame_num); + usbvision_request_intra(usbvision); + return parse_state_next_frame; + } + } + usbvision->last_isoc_frame_num = frame->isoc_header.frame_num; + } + usbvision->header_count++; + frame->scanstate = scan_state_lines; + frame->curline = 0; + + return parse_state_continue; +} + +static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvision, + long *pcopylen) +{ + volatile struct usbvision_frame *frame; + unsigned char *f; + int len; + int i; + unsigned char yuyv[4] = { 180, 128, 10, 128 }; /* YUV components */ + unsigned char rv, gv, bv; /* RGB components */ + int clipmask_index, bytes_per_pixel; + int stretch_bytes, clipmask_add; + + frame = usbvision->cur_frame; + f = frame->data + (frame->v4l2_linesize * frame->curline); + + /* Make sure there's enough data for the entire line */ + len = (frame->isoc_header.frame_width * 2) + 5; + if (scratch_len(usbvision) < len) { + PDEBUG(DBG_PARSE, "out of data in line %d, need %u.\n", frame->curline, len); + return parse_state_out; + } + + if ((frame->curline + 1) >= frame->frmheight) + return parse_state_next_frame; + + bytes_per_pixel = frame->v4l2_format.bytes_per_pixel; + stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel; + clipmask_index = frame->curline * MAX_FRAME_WIDTH; + clipmask_add = usbvision->stretch_width; + + for (i = 0; i < frame->frmwidth; i += (2 * usbvision->stretch_width)) { + scratch_get(usbvision, &yuyv[0], 4); + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f++ = yuyv[0]; /* Y */ + *f++ = yuyv[3]; /* U */ + } else { + YUV_TO_RGB_BY_THE_BOOK(yuyv[0], yuyv[1], yuyv[3], rv, gv, bv); + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x07 & (gv >> 3)) | + (0xF8 & bv); + break; + case V4L2_PIX_FMT_RGB24: + *f++ = rv; + *f++ = gv; + *f++ = bv; + break; + case V4L2_PIX_FMT_RGB32: + *f++ = rv; + *f++ = gv; + *f++ = bv; + f++; + break; + case V4L2_PIX_FMT_RGB555: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x03 & (gv >> 3)) | + (0x7C & (bv << 2)); + break; + } + } + clipmask_index += clipmask_add; + f += stretch_bytes; + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f++ = yuyv[2]; /* Y */ + *f++ = yuyv[1]; /* V */ + } else { + YUV_TO_RGB_BY_THE_BOOK(yuyv[2], yuyv[1], yuyv[3], rv, gv, bv); + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x07 & (gv >> 3)) | + (0xF8 & bv); + break; + case V4L2_PIX_FMT_RGB24: + *f++ = rv; + *f++ = gv; + *f++ = bv; + break; + case V4L2_PIX_FMT_RGB32: + *f++ = rv; + *f++ = gv; + *f++ = bv; + f++; + break; + case V4L2_PIX_FMT_RGB555: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x03 & (gv >> 3)) | + (0x7C & (bv << 2)); + break; + } + } + clipmask_index += clipmask_add; + f += stretch_bytes; + } + + frame->curline += usbvision->stretch_height; + *pcopylen += frame->v4l2_linesize * usbvision->stretch_height; + + if (frame->curline >= frame->frmheight) + return parse_state_next_frame; + return parse_state_continue; +} + +/* The decompression routine */ +static int usbvision_decompress(struct usb_usbvision *usbvision, unsigned char *compressed, + unsigned char *decompressed, int *start_pos, + int *block_typestart_pos, int len) +{ + int rest_pixel, idx, pos, extra_pos, block_len, block_type_pos, block_type_len; + unsigned char block_byte, block_code, block_type, block_type_byte, integrator; + + integrator = 0; + pos = *start_pos; + block_type_pos = *block_typestart_pos; + extra_pos = pos; + block_len = 0; + block_byte = 0; + block_code = 0; + block_type = 0; + block_type_byte = 0; + block_type_len = 0; + rest_pixel = len; + + for (idx = 0; idx < len; idx++) { + if (block_len == 0) { + if (block_type_len == 0) { + block_type_byte = compressed[block_type_pos]; + block_type_pos++; + block_type_len = 4; + } + block_type = (block_type_byte & 0xC0) >> 6; + + /* statistic: */ + usbvision->compr_block_types[block_type]++; + + pos = extra_pos; + if (block_type == 0) { + if (rest_pixel >= 24) { + idx += 23; + rest_pixel -= 24; + integrator = decompressed[idx]; + } else { + idx += rest_pixel - 1; + rest_pixel = 0; + } + } else { + block_code = compressed[pos]; + pos++; + if (rest_pixel >= 24) + block_len = 24; + else + block_len = rest_pixel; + rest_pixel -= block_len; + extra_pos = pos + (block_len / 4); + } + block_type_byte <<= 2; + block_type_len -= 1; + } + if (block_len > 0) { + if ((block_len % 4) == 0) { + block_byte = compressed[pos]; + pos++; + } + if (block_type == 1) /* inter Block */ + integrator = decompressed[idx]; + switch (block_byte & 0xC0) { + case 0x03 << 6: + integrator += compressed[extra_pos]; + extra_pos++; + break; + case 0x02 << 6: + integrator += block_code; + break; + case 0x00: + integrator -= block_code; + break; + } + decompressed[idx] = integrator; + block_byte <<= 2; + block_len -= 1; + } + } + *start_pos = extra_pos; + *block_typestart_pos = block_type_pos; + return idx; +} + + +/* + * usbvision_parse_compress() + * + * Parse compressed frame from the scratch buffer, put + * decoded RGB value into the current frame buffer and add the written + * number of bytes (RGB) to the *pcopylen. + * + */ +static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision, + long *pcopylen) +{ +#define USBVISION_STRIP_MAGIC 0x5A +#define USBVISION_STRIP_LEN_MAX 400 +#define USBVISION_STRIP_HEADER_LEN 3 + + struct usbvision_frame *frame; + unsigned char *f, *u = NULL, *v = NULL; + unsigned char strip_data[USBVISION_STRIP_LEN_MAX]; + unsigned char strip_header[USBVISION_STRIP_HEADER_LEN]; + int idx, idx_end, strip_len, strip_ptr, startblock_pos, block_pos, block_type_pos; + int clipmask_index; + int image_size; + unsigned char rv, gv, bv; + static unsigned char *Y, *U, *V; + + frame = usbvision->cur_frame; + image_size = frame->frmwidth * frame->frmheight; + if ((frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) || + (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420)) { /* this is a planar format */ + /* ... v4l2_linesize not used here. */ + f = frame->data + (frame->width * frame->curline); + } else + f = frame->data + (frame->v4l2_linesize * frame->curline); + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { /* initialise u and v pointers */ + /* get base of u and b planes add halfoffset */ + u = frame->data + + image_size + + (frame->frmwidth >> 1) * frame->curline; + v = u + (image_size >> 1); + } else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) { + v = frame->data + image_size + ((frame->curline * (frame->width)) >> 2); + u = v + (image_size >> 2); + } + + if (frame->curline == 0) + usbvision_adjust_compression(usbvision); + + if (scratch_len(usbvision) < USBVISION_STRIP_HEADER_LEN) + return parse_state_out; + + /* get strip header without changing the scratch_read_ptr */ + scratch_set_extra_ptr(usbvision, &strip_ptr, 0); + scratch_get_extra(usbvision, &strip_header[0], &strip_ptr, + USBVISION_STRIP_HEADER_LEN); + + if (strip_header[0] != USBVISION_STRIP_MAGIC) { + /* wrong strip magic */ + usbvision->strip_magic_errors++; + return parse_state_next_frame; + } + + if (frame->curline != (int)strip_header[2]) { + /* line number mismatch error */ + usbvision->strip_line_number_errors++; + } + + strip_len = 2 * (unsigned int)strip_header[1]; + if (strip_len > USBVISION_STRIP_LEN_MAX) { + /* strip overrun */ + /* I think this never happens */ + usbvision_request_intra(usbvision); + } + + if (scratch_len(usbvision) < strip_len) { + /* there is not enough data for the strip */ + return parse_state_out; + } + + if (usbvision->intra_frame_buffer) { + Y = usbvision->intra_frame_buffer + frame->frmwidth * frame->curline; + U = usbvision->intra_frame_buffer + image_size + (frame->frmwidth / 2) * (frame->curline / 2); + V = usbvision->intra_frame_buffer + image_size / 4 * 5 + (frame->frmwidth / 2) * (frame->curline / 2); + } else { + return parse_state_next_frame; + } + + clipmask_index = frame->curline * MAX_FRAME_WIDTH; + + scratch_get(usbvision, strip_data, strip_len); + + idx_end = frame->frmwidth; + block_type_pos = USBVISION_STRIP_HEADER_LEN; + startblock_pos = block_type_pos + (idx_end - 1) / 96 + (idx_end / 2 - 1) / 96 + 2; + block_pos = startblock_pos; + + usbvision->block_pos = block_pos; + + usbvision_decompress(usbvision, strip_data, Y, &block_pos, &block_type_pos, idx_end); + if (strip_len > usbvision->max_strip_len) + usbvision->max_strip_len = strip_len; + + if (frame->curline % 2) + usbvision_decompress(usbvision, strip_data, V, &block_pos, &block_type_pos, idx_end / 2); + else + usbvision_decompress(usbvision, strip_data, U, &block_pos, &block_type_pos, idx_end / 2); + + if (block_pos > usbvision->comprblock_pos) + usbvision->comprblock_pos = block_pos; + if (block_pos > strip_len) + usbvision->strip_len_errors++; + + for (idx = 0; idx < idx_end; idx++) { + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f++ = Y[idx]; + *f++ = idx & 0x01 ? U[idx / 2] : V[idx / 2]; + } else if (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) { + *f++ = Y[idx]; + if (idx & 0x01) + *u++ = U[idx >> 1]; + else + *v++ = V[idx >> 1]; + } else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) { + *f++ = Y[idx]; + if (!((idx & 0x01) | (frame->curline & 0x01))) { + /* only need do this for 1 in 4 pixels */ + /* intraframe buffer is YUV420 format */ + *u++ = U[idx >> 1]; + *v++ = V[idx >> 1]; + } + } else { + YUV_TO_RGB_BY_THE_BOOK(Y[idx], U[idx / 2], V[idx / 2], rv, gv, bv); + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_GREY: + *f++ = Y[idx]; + break; + case V4L2_PIX_FMT_RGB555: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x03 & (gv >> 3)) | + (0x7C & (bv << 2)); + break; + case V4L2_PIX_FMT_RGB565: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x07 & (gv >> 3)) | + (0xF8 & bv); + break; + case V4L2_PIX_FMT_RGB24: + *f++ = rv; + *f++ = gv; + *f++ = bv; + break; + case V4L2_PIX_FMT_RGB32: + *f++ = rv; + *f++ = gv; + *f++ = bv; + f++; + break; + } + } + clipmask_index++; + } + /* Deal with non-integer no. of bytes for YUV420P */ + if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420) + *pcopylen += frame->v4l2_linesize; + else + *pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1; + + frame->curline += 1; + + if (frame->curline >= frame->frmheight) + return parse_state_next_frame; + return parse_state_continue; + +} + + +/* + * usbvision_parse_lines_420() + * + * Parse two lines from the scratch buffer, put + * decoded RGB value into the current frame buffer and add the written + * number of bytes (RGB) to the *pcopylen. + * + */ +static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvision, + long *pcopylen) +{ + struct usbvision_frame *frame; + unsigned char *f_even = NULL, *f_odd = NULL; + unsigned int pixel_per_line, block; + int pixel, block_split; + int y_ptr, u_ptr, v_ptr, y_odd_offset; + const int y_block_size = 128; + const int uv_block_size = 64; + const int sub_block_size = 32; + const int y_step[] = { 0, 0, 0, 2 }, y_step_size = 4; + const int uv_step[] = { 0, 0, 0, 4 }, uv_step_size = 4; + unsigned char y[2], u, v; /* YUV components */ + int y_, u_, v_, vb, uvg, ur; + int r_, g_, b_; /* RGB components */ + unsigned char g; + int clipmask_even_index, clipmask_odd_index, bytes_per_pixel; + int clipmask_add, stretch_bytes; + + frame = usbvision->cur_frame; + f_even = frame->data + (frame->v4l2_linesize * frame->curline); + f_odd = f_even + frame->v4l2_linesize * usbvision->stretch_height; + + /* Make sure there's enough data for the entire line */ + /* In this mode usbvision transfer 3 bytes for every 2 pixels */ + /* I need two lines to decode the color */ + bytes_per_pixel = frame->v4l2_format.bytes_per_pixel; + stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel; + clipmask_even_index = frame->curline * MAX_FRAME_WIDTH; + clipmask_odd_index = clipmask_even_index + MAX_FRAME_WIDTH; + clipmask_add = usbvision->stretch_width; + pixel_per_line = frame->isoc_header.frame_width; + + if (scratch_len(usbvision) < (int)pixel_per_line * 3) { + /* printk(KERN_DEBUG "out of data, need %d\n", len); */ + return parse_state_out; + } + + if ((frame->curline + 1) >= frame->frmheight) + return parse_state_next_frame; + + block_split = (pixel_per_line%y_block_size) ? 1 : 0; /* are some blocks splitted into different lines? */ + + y_odd_offset = (pixel_per_line / y_block_size) * (y_block_size + uv_block_size) + + block_split * uv_block_size; + + scratch_set_extra_ptr(usbvision, &y_ptr, y_odd_offset); + scratch_set_extra_ptr(usbvision, &u_ptr, y_block_size); + scratch_set_extra_ptr(usbvision, &v_ptr, y_odd_offset + + (4 - block_split) * sub_block_size); + + for (block = 0; block < (pixel_per_line / sub_block_size); block++) { + for (pixel = 0; pixel < sub_block_size; pixel += 2) { + scratch_get(usbvision, &y[0], 2); + scratch_get_extra(usbvision, &u, &u_ptr, 1); + scratch_get_extra(usbvision, &v, &v_ptr, 1); + + /* I don't use the YUV_TO_RGB macro for better performance */ + v_ = v - 128; + u_ = u - 128; + vb = 132252 * v_; + uvg = -53281 * u_ - 25625 * v_; + ur = 104595 * u_; + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f_even++ = y[0]; + *f_even++ = v; + } else { + y_ = 76284 * (y[0] - 16); + + b_ = (y_ + vb) >> 16; + g_ = (y_ + uvg) >> 16; + r_ = (y_ + ur) >> 16; + + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_even++ = + (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_even++ = + (0x07 & (g >> 3)) | + (0xF8 & LIMIT_RGB(b_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_even++ = LIMIT_RGB(r_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(b_); + break; + case V4L2_PIX_FMT_RGB32: + *f_even++ = LIMIT_RGB(r_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(b_); + f_even++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_even++ = (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_even++ = (0x03 & (g >> 3)) | + (0x7C & (LIMIT_RGB(b_) << 2)); + break; + } + } + clipmask_even_index += clipmask_add; + f_even += stretch_bytes; + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f_even++ = y[1]; + *f_even++ = u; + } else { + y_ = 76284 * (y[1] - 16); + + b_ = (y_ + vb) >> 16; + g_ = (y_ + uvg) >> 16; + r_ = (y_ + ur) >> 16; + + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_even++ = + (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_even++ = + (0x07 & (g >> 3)) | + (0xF8 & LIMIT_RGB(b_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_even++ = LIMIT_RGB(r_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(b_); + break; + case V4L2_PIX_FMT_RGB32: + *f_even++ = LIMIT_RGB(r_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(b_); + f_even++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_even++ = (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_even++ = (0x03 & (g >> 3)) | + (0x7C & (LIMIT_RGB(b_) << 2)); + break; + } + } + clipmask_even_index += clipmask_add; + f_even += stretch_bytes; + + scratch_get_extra(usbvision, &y[0], &y_ptr, 2); + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f_odd++ = y[0]; + *f_odd++ = v; + } else { + y_ = 76284 * (y[0] - 16); + + b_ = (y_ + vb) >> 16; + g_ = (y_ + uvg) >> 16; + r_ = (y_ + ur) >> 16; + + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_odd++ = + (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_odd++ = + (0x07 & (g >> 3)) | + (0xF8 & LIMIT_RGB(b_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_odd++ = LIMIT_RGB(r_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(b_); + break; + case V4L2_PIX_FMT_RGB32: + *f_odd++ = LIMIT_RGB(r_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(b_); + f_odd++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_odd++ = (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_odd++ = (0x03 & (g >> 3)) | + (0x7C & (LIMIT_RGB(b_) << 2)); + break; + } + } + clipmask_odd_index += clipmask_add; + f_odd += stretch_bytes; + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f_odd++ = y[1]; + *f_odd++ = u; + } else { + y_ = 76284 * (y[1] - 16); + + b_ = (y_ + vb) >> 16; + g_ = (y_ + uvg) >> 16; + r_ = (y_ + ur) >> 16; + + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_odd++ = + (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_odd++ = + (0x07 & (g >> 3)) | + (0xF8 & LIMIT_RGB(b_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_odd++ = LIMIT_RGB(r_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(b_); + break; + case V4L2_PIX_FMT_RGB32: + *f_odd++ = LIMIT_RGB(r_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(b_); + f_odd++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_odd++ = (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_odd++ = (0x03 & (g >> 3)) | + (0x7C & (LIMIT_RGB(b_) << 2)); + break; + } + } + clipmask_odd_index += clipmask_add; + f_odd += stretch_bytes; + } + + scratch_rm_old(usbvision, y_step[block % y_step_size] * sub_block_size); + scratch_inc_extra_ptr(&y_ptr, y_step[(block + 2 * block_split) % y_step_size] + * sub_block_size); + scratch_inc_extra_ptr(&u_ptr, uv_step[block % uv_step_size] + * sub_block_size); + scratch_inc_extra_ptr(&v_ptr, uv_step[(block + 2 * block_split) % uv_step_size] + * sub_block_size); + } + + scratch_rm_old(usbvision, pixel_per_line * 3 / 2 + + block_split * sub_block_size); + + frame->curline += 2 * usbvision->stretch_height; + *pcopylen += frame->v4l2_linesize * 2 * usbvision->stretch_height; + + if (frame->curline >= frame->frmheight) + return parse_state_next_frame; + return parse_state_continue; +} + +/* + * usbvision_parse_data() + * + * Generic routine to parse the scratch buffer. It employs either + * usbvision_find_header() or usbvision_parse_lines() to do most + * of work. + * + */ +static void usbvision_parse_data(struct usb_usbvision *usbvision) +{ + struct usbvision_frame *frame; + enum parse_state newstate; + long copylen = 0; + unsigned long lock_flags; + + frame = usbvision->cur_frame; + + PDEBUG(DBG_PARSE, "parsing len=%d\n", scratch_len(usbvision)); + + while (1) { + newstate = parse_state_out; + if (scratch_len(usbvision)) { + if (frame->scanstate == scan_state_scanning) { + newstate = usbvision_find_header(usbvision); + } else if (frame->scanstate == scan_state_lines) { + if (usbvision->isoc_mode == ISOC_MODE_YUV420) + newstate = usbvision_parse_lines_420(usbvision, ©len); + else if (usbvision->isoc_mode == ISOC_MODE_YUV422) + newstate = usbvision_parse_lines_422(usbvision, ©len); + else if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) + newstate = usbvision_parse_compress(usbvision, ©len); + } + } + if (newstate == parse_state_continue) + continue; + if ((newstate == parse_state_next_frame) || (newstate == parse_state_out)) + break; + return; /* parse_state_end_parse */ + } + + if (newstate == parse_state_next_frame) { + frame->grabstate = frame_state_done; + do_gettimeofday(&(frame->timestamp)); + frame->sequence = usbvision->frame_num; + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + list_move_tail(&(frame->frame), &usbvision->outqueue); + usbvision->cur_frame = NULL; + spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); + + usbvision->frame_num++; + + /* This will cause the process to request another frame. */ + if (waitqueue_active(&usbvision->wait_frame)) { + PDEBUG(DBG_PARSE, "Wake up !"); + wake_up_interruptible(&usbvision->wait_frame); + } + } else { + frame->grabstate = frame_state_grabbing; + } + + /* Update the frame's uncompressed length. */ + frame->scanlength += copylen; +} + + +/* + * Make all of the blocks of data contiguous + */ +static int usbvision_compress_isochronous(struct usb_usbvision *usbvision, + struct urb *urb) +{ + unsigned char *packet_data; + int i, totlen = 0; + + for (i = 0; i < urb->number_of_packets; i++) { + int packet_len = urb->iso_frame_desc[i].actual_length; + int packet_stat = urb->iso_frame_desc[i].status; + + packet_data = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + + /* Detect and ignore errored packets */ + if (packet_stat) { /* packet_stat != 0 ????????????? */ + PDEBUG(DBG_ISOC, "data error: [%d] len=%d, status=%X", i, packet_len, packet_stat); + usbvision->isoc_err_count++; + continue; + } + + /* Detect and ignore empty packets */ + if (packet_len < 0) { + PDEBUG(DBG_ISOC, "error packet [%d]", i); + usbvision->isoc_skip_count++; + continue; + } else if (packet_len == 0) { /* Frame end ????? */ + PDEBUG(DBG_ISOC, "null packet [%d]", i); + usbvision->isocstate = isoc_state_no_frame; + usbvision->isoc_skip_count++; + continue; + } else if (packet_len > usbvision->isoc_packet_size) { + PDEBUG(DBG_ISOC, "packet[%d] > isoc_packet_size", i); + usbvision->isoc_skip_count++; + continue; + } + + PDEBUG(DBG_ISOC, "packet ok [%d] len=%d", i, packet_len); + + if (usbvision->isocstate == isoc_state_no_frame) { /* new frame begins */ + usbvision->isocstate = isoc_state_in_frame; + scratch_mark_header(usbvision); + usbvision_measure_bandwidth(usbvision); + PDEBUG(DBG_ISOC, "packet with header"); + } + + /* + * If usbvision continues to feed us with data but there is no + * consumption (if, for example, V4L client fell asleep) we + * may overflow the buffer. We have to move old data over to + * free room for new data. This is bad for old data. If we + * just drop new data then it's bad for new data... choose + * your favorite evil here. + */ + if (scratch_free(usbvision) < packet_len) { + usbvision->scratch_ovf_count++; + PDEBUG(DBG_ISOC, "scratch buf overflow! scr_len: %d, n: %d", + scratch_len(usbvision), packet_len); + scratch_rm_old(usbvision, packet_len - scratch_free(usbvision)); + } + + /* Now we know that there is enough room in scratch buffer */ + scratch_put(usbvision, packet_data, packet_len); + totlen += packet_len; + usbvision->isoc_data_count += packet_len; + usbvision->isoc_packet_count++; + } +#if ENABLE_HEXDUMP + if (totlen > 0) { + static int foo; + + if (foo < 1) { + printk(KERN_DEBUG "+%d.\n", usbvision->scratchlen); + usbvision_hexdump(data0, (totlen > 64) ? 64 : totlen); + ++foo; + } + } +#endif + return totlen; +} + +static void usbvision_isoc_irq(struct urb *urb) +{ + int err_code = 0; + int len; + struct usb_usbvision *usbvision = urb->context; + int i; + unsigned long start_time = jiffies; + struct usbvision_frame **f; + + /* We don't want to do anything if we are about to be removed! */ + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return; + + /* any urb with wrong status is ignored without acknowledgement */ + if (urb->status == -ENOENT) + return; + + f = &usbvision->cur_frame; + + /* Manage streaming interruption */ + if (usbvision->streaming == stream_interrupt) { + usbvision->streaming = stream_idle; + if ((*f)) { + (*f)->grabstate = frame_state_ready; + (*f)->scanstate = scan_state_scanning; + } + PDEBUG(DBG_IRQ, "stream interrupted"); + wake_up_interruptible(&usbvision->wait_stream); + } + + /* Copy the data received into our scratch buffer */ + len = usbvision_compress_isochronous(usbvision, urb); + + usbvision->isoc_urb_count++; + usbvision->urb_length = len; + + if (usbvision->streaming == stream_on) { + /* If we collected enough data let's parse! */ + if (scratch_len(usbvision) > USBVISION_HEADER_LENGTH && + !list_empty(&(usbvision->inqueue))) { + if (!(*f)) { + (*f) = list_entry(usbvision->inqueue.next, + struct usbvision_frame, + frame); + } + usbvision_parse_data(usbvision); + } else { + /* If we don't have a frame + we're current working on, complain */ + PDEBUG(DBG_IRQ, + "received data, but no one needs it"); + scratch_reset(usbvision); + } + } else { + PDEBUG(DBG_IRQ, "received data, but no one needs it"); + scratch_reset(usbvision); + } + + usbvision->time_in_irq += jiffies - start_time; + + for (i = 0; i < USBVISION_URB_FRAMES; i++) { + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + + urb->status = 0; + urb->dev = usbvision->dev; + err_code = usb_submit_urb(urb, GFP_ATOMIC); + + if (err_code) { + dev_err(&usbvision->dev->dev, + "%s: usb_submit_urb failed: error %d\n", + __func__, err_code); + } + + return; +} + +/*************************************/ +/* Low level usbvision access functions */ +/*************************************/ + +/* + * usbvision_read_reg() + * + * return < 0 -> Error + * >= 0 -> Data + */ + +int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg) +{ + int err_code = 0; + unsigned char buffer[1]; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return -1; + + err_code = usb_control_msg(usbvision->dev, usb_rcvctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, + 0, (__u16) reg, buffer, 1, HZ); + + if (err_code < 0) { + dev_err(&usbvision->dev->dev, + "%s: failed: error %d\n", __func__, err_code); + return err_code; + } + return buffer[0]; +} + +/* + * usbvision_write_reg() + * + * return 1 -> Reg written + * 0 -> usbvision is not yet ready + * -1 -> Something went wrong + */ + +int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg, + unsigned char value) +{ + int err_code = 0; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + err_code = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, (__u16) reg, &value, 1, HZ); + + if (err_code < 0) { + dev_err(&usbvision->dev->dev, + "%s: failed: error %d\n", __func__, err_code); + } + return err_code; +} + + +static void usbvision_ctrl_urb_complete(struct urb *urb) +{ + struct usb_usbvision *usbvision = (struct usb_usbvision *)urb->context; + + PDEBUG(DBG_IRQ, ""); + usbvision->ctrl_urb_busy = 0; + if (waitqueue_active(&usbvision->ctrl_urb_wq)) + wake_up_interruptible(&usbvision->ctrl_urb_wq); +} + + +static int usbvision_write_reg_irq(struct usb_usbvision *usbvision, int address, + unsigned char *data, int len) +{ + int err_code = 0; + + PDEBUG(DBG_IRQ, ""); + if (len > 8) + return -EFAULT; + if (usbvision->ctrl_urb_busy) + return -EBUSY; + usbvision->ctrl_urb_busy = 1; + + usbvision->ctrl_urb_setup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT; + usbvision->ctrl_urb_setup.bRequest = USBVISION_OP_CODE; + usbvision->ctrl_urb_setup.wValue = 0; + usbvision->ctrl_urb_setup.wIndex = cpu_to_le16(address); + usbvision->ctrl_urb_setup.wLength = cpu_to_le16(len); + usb_fill_control_urb(usbvision->ctrl_urb, usbvision->dev, + usb_sndctrlpipe(usbvision->dev, 1), + (unsigned char *)&usbvision->ctrl_urb_setup, + (void *)usbvision->ctrl_urb_buffer, len, + usbvision_ctrl_urb_complete, + (void *)usbvision); + + memcpy(usbvision->ctrl_urb_buffer, data, len); + + err_code = usb_submit_urb(usbvision->ctrl_urb, GFP_ATOMIC); + if (err_code < 0) { + /* error in usb_submit_urb() */ + usbvision->ctrl_urb_busy = 0; + } + PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, err_code); + return err_code; +} + + +static int usbvision_init_compression(struct usb_usbvision *usbvision) +{ + int err_code = 0; + + usbvision->last_isoc_frame_num = -1; + usbvision->isoc_data_count = 0; + usbvision->isoc_packet_count = 0; + usbvision->isoc_skip_count = 0; + usbvision->compr_level = 50; + usbvision->last_compr_level = -1; + usbvision->isoc_urb_count = 0; + usbvision->request_intra = 1; + usbvision->isoc_measure_bandwidth_count = 0; + + return err_code; +} + +/* this function measures the used bandwidth since last call + * return: 0 : no error + * sets used_bandwidth to 1-100 : 1-100% of full bandwidth resp. to isoc_packet_size + */ +static int usbvision_measure_bandwidth(struct usb_usbvision *usbvision) +{ + int err_code = 0; + + if (usbvision->isoc_measure_bandwidth_count < 2) { /* this gives an average bandwidth of 3 frames */ + usbvision->isoc_measure_bandwidth_count++; + return err_code; + } + if ((usbvision->isoc_packet_size > 0) && (usbvision->isoc_packet_count > 0)) { + usbvision->used_bandwidth = usbvision->isoc_data_count / + (usbvision->isoc_packet_count + usbvision->isoc_skip_count) * + 100 / usbvision->isoc_packet_size; + } + usbvision->isoc_measure_bandwidth_count = 0; + usbvision->isoc_data_count = 0; + usbvision->isoc_packet_count = 0; + usbvision->isoc_skip_count = 0; + return err_code; +} + +static int usbvision_adjust_compression(struct usb_usbvision *usbvision) +{ + int err_code = 0; + unsigned char buffer[6]; + + PDEBUG(DBG_IRQ, ""); + if ((adjust_compression) && (usbvision->used_bandwidth > 0)) { + usbvision->compr_level += (usbvision->used_bandwidth - 90) / 2; + RESTRICT_TO_RANGE(usbvision->compr_level, 0, 100); + if (usbvision->compr_level != usbvision->last_compr_level) { + int distortion; + + if (usbvision->bridge_type == BRIDGE_NT1004 || usbvision->bridge_type == BRIDGE_NT1005) { + buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100); /* PCM Threshold 1 */ + buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100); /* PCM Threshold 2 */ + distortion = 7 + 248 * usbvision->compr_level / 100; + buffer[2] = (unsigned char)(distortion & 0xFF); /* Average distortion Threshold (inter) */ + buffer[3] = (unsigned char)(distortion & 0xFF); /* Average distortion Threshold (intra) */ + distortion = 1 + 42 * usbvision->compr_level / 100; + buffer[4] = (unsigned char)(distortion & 0xFF); /* Maximum distortion Threshold (inter) */ + buffer[5] = (unsigned char)(distortion & 0xFF); /* Maximum distortion Threshold (intra) */ + } else { /* BRIDGE_NT1003 */ + buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100); /* PCM threshold 1 */ + buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100); /* PCM threshold 2 */ + distortion = 2 + 253 * usbvision->compr_level / 100; + buffer[2] = (unsigned char)(distortion & 0xFF); /* distortion threshold bit0-7 */ + buffer[3] = 0; /* (unsigned char)((distortion >> 8) & 0x0F); distortion threshold bit 8-11 */ + distortion = 0 + 43 * usbvision->compr_level / 100; + buffer[4] = (unsigned char)(distortion & 0xFF); /* maximum distortion bit0-7 */ + buffer[5] = 0; /* (unsigned char)((distortion >> 8) & 0x01); maximum distortion bit 8 */ + } + err_code = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6); + if (err_code == 0) { + PDEBUG(DBG_IRQ, "new compr params %#02x %#02x %#02x %#02x %#02x %#02x", buffer[0], + buffer[1], buffer[2], buffer[3], buffer[4], buffer[5]); + usbvision->last_compr_level = usbvision->compr_level; + } + } + } + return err_code; +} + +static int usbvision_request_intra(struct usb_usbvision *usbvision) +{ + int err_code = 0; + unsigned char buffer[1]; + + PDEBUG(DBG_IRQ, ""); + usbvision->request_intra = 1; + buffer[0] = 1; + usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1); + return err_code; +} + +static int usbvision_unrequest_intra(struct usb_usbvision *usbvision) +{ + int err_code = 0; + unsigned char buffer[1]; + + PDEBUG(DBG_IRQ, ""); + usbvision->request_intra = 0; + buffer[0] = 0; + usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1); + return err_code; +} + +/******************************* + * usbvision utility functions + *******************************/ + +int usbvision_power_off(struct usb_usbvision *usbvision) +{ + int err_code = 0; + + PDEBUG(DBG_FUNC, ""); + + err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN); + if (err_code == 1) + usbvision->power = 0; + PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code != 1) ? "ERROR" : "power is off", err_code); + return err_code; +} + +/* configure webcam image sensor using the serial port */ +static int usbvision_init_webcam(struct usb_usbvision *usbvision) +{ + int rc; + int i; + static char init_values[38][3] = { + { 0x04, 0x12, 0x08 }, { 0x05, 0xff, 0xc8 }, { 0x06, 0x18, 0x07 }, { 0x07, 0x90, 0x00 }, + { 0x09, 0x00, 0x00 }, { 0x0a, 0x00, 0x00 }, { 0x0b, 0x08, 0x00 }, { 0x0d, 0xcc, 0xcc }, + { 0x0e, 0x13, 0x14 }, { 0x10, 0x9b, 0x83 }, { 0x11, 0x5a, 0x3f }, { 0x12, 0xe4, 0x73 }, + { 0x13, 0x88, 0x84 }, { 0x14, 0x89, 0x80 }, { 0x15, 0x00, 0x20 }, { 0x16, 0x00, 0x00 }, + { 0x17, 0xff, 0xa0 }, { 0x18, 0x6b, 0x20 }, { 0x19, 0x22, 0x40 }, { 0x1a, 0x10, 0x07 }, + { 0x1b, 0x00, 0x47 }, { 0x1c, 0x03, 0xe0 }, { 0x1d, 0x00, 0x00 }, { 0x1e, 0x00, 0x00 }, + { 0x1f, 0x00, 0x00 }, { 0x20, 0x00, 0x00 }, { 0x21, 0x00, 0x00 }, { 0x22, 0x00, 0x00 }, + { 0x23, 0x00, 0x00 }, { 0x24, 0x00, 0x00 }, { 0x25, 0x00, 0x00 }, { 0x26, 0x00, 0x00 }, + { 0x27, 0x00, 0x00 }, { 0x28, 0x00, 0x00 }, { 0x29, 0x00, 0x00 }, { 0x08, 0x80, 0x60 }, + { 0x0f, 0x2d, 0x24 }, { 0x0c, 0x80, 0x80 } + }; + char value[3]; + + /* the only difference between PAL and NTSC init_values */ + if (usbvision_device_data[usbvision->dev_model].video_norm == V4L2_STD_NTSC) + init_values[4][1] = 0x34; + + for (i = 0; i < sizeof(init_values) / 3; i++) { + usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT); + memcpy(value, init_values[i], 3); + rc = usb_control_msg(usbvision->dev, + usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_SER_DAT1, value, + 3, HZ); + if (rc < 0) + return rc; + usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SIO); + /* write 3 bytes to the serial port using SIO mode */ + usbvision_write_reg(usbvision, USBVISION_SER_CONT, 3 | 0x10); + usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, 0); + usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT); + usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, USBVISION_IO_2); + usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT | USBVISION_CLK_OUT); + usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT | USBVISION_DAT_IO); + usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_SER_MODE_SOFT | USBVISION_CLK_OUT | USBVISION_DAT_IO); + } + + return 0; +} + +/* + * usbvision_set_video_format() + * + */ +static int usbvision_set_video_format(struct usb_usbvision *usbvision, int format) +{ + static const char proc[] = "usbvision_set_video_format"; + int rc; + unsigned char value[2]; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + PDEBUG(DBG_FUNC, "isoc_mode %#02x", format); + + if ((format != ISOC_MODE_YUV422) + && (format != ISOC_MODE_YUV420) + && (format != ISOC_MODE_COMPRESS)) { + printk(KERN_ERR "usbvision: unknown video format %02x, using default YUV420", + format); + format = ISOC_MODE_YUV420; + } + value[0] = 0x0A; /* TODO: See the effect of the filter */ + value[1] = format; /* Sets the VO_MODE register which follows FILT_CONT */ + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_FILT_CONT, value, 2, HZ); + + if (rc < 0) { + printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + } + usbvision->isoc_mode = format; + return rc; +} + +/* + * usbvision_set_output() + * + */ + +int usbvision_set_output(struct usb_usbvision *usbvision, int width, + int height) +{ + int err_code = 0; + int usb_width, usb_height; + unsigned int frame_rate = 0, frame_drop = 0; + unsigned char value[4]; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + if (width > MAX_USB_WIDTH) { + usb_width = width / 2; + usbvision->stretch_width = 2; + } else { + usb_width = width; + usbvision->stretch_width = 1; + } + + if (height > MAX_USB_HEIGHT) { + usb_height = height / 2; + usbvision->stretch_height = 2; + } else { + usb_height = height; + usbvision->stretch_height = 1; + } + + RESTRICT_TO_RANGE(usb_width, MIN_FRAME_WIDTH, MAX_USB_WIDTH); + usb_width &= ~(MIN_FRAME_WIDTH-1); + RESTRICT_TO_RANGE(usb_height, MIN_FRAME_HEIGHT, MAX_USB_HEIGHT); + usb_height &= ~(1); + + PDEBUG(DBG_FUNC, "usb %dx%d; screen %dx%d; stretch %dx%d", + usb_width, usb_height, width, height, + usbvision->stretch_width, usbvision->stretch_height); + + /* I'll not rewrite the same values */ + if ((usb_width != usbvision->curwidth) || (usb_height != usbvision->curheight)) { + value[0] = usb_width & 0xff; /* LSB */ + value[1] = (usb_width >> 8) & 0x03; /* MSB */ + value[2] = usb_height & 0xff; /* LSB */ + value[3] = (usb_height >> 8) & 0x03; /* MSB */ + + err_code = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, + 0, (__u16) USBVISION_LXSIZE_O, value, 4, HZ); + + if (err_code < 0) { + dev_err(&usbvision->dev->dev, + "%s failed: error %d\n", __func__, err_code); + return err_code; + } + usbvision->curwidth = usbvision->stretch_width * usb_width; + usbvision->curheight = usbvision->stretch_height * usb_height; + } + + if (usbvision->isoc_mode == ISOC_MODE_YUV422) + frame_rate = (usbvision->isoc_packet_size * 1000) / (usb_width * usb_height * 2); + else if (usbvision->isoc_mode == ISOC_MODE_YUV420) + frame_rate = (usbvision->isoc_packet_size * 1000) / ((usb_width * usb_height * 12) / 8); + else + frame_rate = FRAMERATE_MAX; + + if (usbvision->tvnorm_id & V4L2_STD_625_50) + frame_drop = frame_rate * 32 / 25 - 1; + else if (usbvision->tvnorm_id & V4L2_STD_525_60) + frame_drop = frame_rate * 32 / 30 - 1; + + RESTRICT_TO_RANGE(frame_drop, FRAMERATE_MIN, FRAMERATE_MAX); + + PDEBUG(DBG_FUNC, "frame_rate %d fps, frame_drop %d", frame_rate, frame_drop); + + frame_drop = FRAMERATE_MAX; /* We can allow the maximum here, because dropping is controlled */ + + if (usbvision_device_data[usbvision->dev_model].codec == CODEC_WEBCAM) { + if (usbvision_device_data[usbvision->dev_model].video_norm == V4L2_STD_PAL) + frame_drop = 25; + else + frame_drop = 30; + } + + /* frame_drop = 7; => frame_phase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ... + => frame_skip = 4; + => frame_rate = (7 + 1) * 25 / 32 = 200 / 32 = 6.25; + + frame_drop = 9; => frame_phase = 1, 5, 8, 11, 14, 17, 21, 24, 27, 1, 4, 8, ... + => frame_skip = 4, 3, 3, 3, 3, 4, 3, 3, 3, 3, 4, ... + => frame_rate = (9 + 1) * 25 / 32 = 250 / 32 = 7.8125; + */ + err_code = usbvision_write_reg(usbvision, USBVISION_FRM_RATE, frame_drop); + return err_code; +} + + +/* + * usbvision_frames_alloc + * allocate the required frames + */ +int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames) +{ + int i; + + /* needs to be page aligned cause the buffers can be mapped individually! */ + usbvision->max_frame_size = PAGE_ALIGN(usbvision->curwidth * + usbvision->curheight * + usbvision->palette.bytes_per_pixel); + + /* Try to do my best to allocate the frames the user want in the remaining memory */ + usbvision->num_frames = number_of_frames; + while (usbvision->num_frames > 0) { + usbvision->fbuf_size = usbvision->num_frames * usbvision->max_frame_size; + usbvision->fbuf = usbvision_rvmalloc(usbvision->fbuf_size); + if (usbvision->fbuf) + break; + usbvision->num_frames--; + } + + spin_lock_init(&usbvision->queue_lock); + init_waitqueue_head(&usbvision->wait_frame); + init_waitqueue_head(&usbvision->wait_stream); + + /* Allocate all buffers */ + for (i = 0; i < usbvision->num_frames; i++) { + usbvision->frame[i].index = i; + usbvision->frame[i].grabstate = frame_state_unused; + usbvision->frame[i].data = usbvision->fbuf + + i * usbvision->max_frame_size; + /* + * Set default sizes for read operation. + */ + usbvision->stretch_width = 1; + usbvision->stretch_height = 1; + usbvision->frame[i].width = usbvision->curwidth; + usbvision->frame[i].height = usbvision->curheight; + usbvision->frame[i].bytes_read = 0; + } + PDEBUG(DBG_FUNC, "allocated %d frames (%d bytes per frame)", + usbvision->num_frames, usbvision->max_frame_size); + return usbvision->num_frames; +} + +/* + * usbvision_frames_free + * frees memory allocated for the frames + */ +void usbvision_frames_free(struct usb_usbvision *usbvision) +{ + /* Have to free all that memory */ + PDEBUG(DBG_FUNC, "free %d frames", usbvision->num_frames); + + if (usbvision->fbuf != NULL) { + usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size); + usbvision->fbuf = NULL; + + usbvision->num_frames = 0; + } +} +/* + * usbvision_empty_framequeues() + * prepare queues for incoming and outgoing frames + */ +void usbvision_empty_framequeues(struct usb_usbvision *usbvision) +{ + u32 i; + + INIT_LIST_HEAD(&(usbvision->inqueue)); + INIT_LIST_HEAD(&(usbvision->outqueue)); + + for (i = 0; i < USBVISION_NUMFRAMES; i++) { + usbvision->frame[i].grabstate = frame_state_unused; + usbvision->frame[i].bytes_read = 0; + } +} + +/* + * usbvision_stream_interrupt() + * stops streaming + */ +int usbvision_stream_interrupt(struct usb_usbvision *usbvision) +{ + int ret = 0; + + /* stop reading from the device */ + + usbvision->streaming = stream_interrupt; + ret = wait_event_timeout(usbvision->wait_stream, + (usbvision->streaming == stream_idle), + msecs_to_jiffies(USBVISION_NUMSBUF*USBVISION_URB_FRAMES)); + return ret; +} + +/* + * usbvision_set_compress_params() + * + */ + +static int usbvision_set_compress_params(struct usb_usbvision *usbvision) +{ + static const char proc[] = "usbvision_set_compresion_params: "; + int rc; + unsigned char value[6]; + + value[0] = 0x0F; /* Intra-Compression cycle */ + value[1] = 0x01; /* Reg.45 one line per strip */ + value[2] = 0x00; /* Reg.46 Force intra mode on all new frames */ + value[3] = 0x00; /* Reg.47 FORCE_UP <- 0 normal operation (not force) */ + value[4] = 0xA2; /* Reg.48 BUF_THR I'm not sure if this does something in not compressed mode. */ + value[5] = 0x00; /* Reg.49 DVI_YUV This has nothing to do with compression */ + + /* catched values for NT1004 */ + /* value[0] = 0xFF; Never apply intra mode automatically */ + /* value[1] = 0xF1; Use full frame height for virtual strip width; One line per strip */ + /* value[2] = 0x01; Force intra mode on all new frames */ + /* value[3] = 0x00; Strip size 400 Bytes; do not force up */ + /* value[4] = 0xA2; */ + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_INTRA_CYC, value, 5, HZ); + + if (rc < 0) { + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + return rc; + } + + if (usbvision->bridge_type == BRIDGE_NT1004) { + value[0] = 20; /* PCM Threshold 1 */ + value[1] = 12; /* PCM Threshold 2 */ + value[2] = 255; /* Distortion Threshold inter */ + value[3] = 255; /* Distortion Threshold intra */ + value[4] = 43; /* Max Distortion inter */ + value[5] = 43; /* Max Distortion intra */ + } else { + value[0] = 20; /* PCM Threshold 1 */ + value[1] = 12; /* PCM Threshold 2 */ + value[2] = 255; /* Distortion Threshold d7-d0 */ + value[3] = 0; /* Distortion Threshold d11-d8 */ + value[4] = 43; /* Max Distortion d7-d0 */ + value[5] = 0; /* Max Distortion d8 */ + } + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_PCM_THR1, value, 6, HZ); + + if (rc < 0) { + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + } + return rc; +} + + +/* + * usbvision_set_input() + * + * Set the input (saa711x, ...) size x y and other misc input params + * I've no idea if this parameters are right + * + */ +int usbvision_set_input(struct usb_usbvision *usbvision) +{ + static const char proc[] = "usbvision_set_input: "; + int rc; + unsigned char value[8]; + unsigned char dvi_yuv_value; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + /* Set input format expected from decoder*/ + if (usbvision_device_data[usbvision->dev_model].vin_reg1_override) { + value[0] = usbvision_device_data[usbvision->dev_model].vin_reg1; + } else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) { + /* SAA7113 uses 8 bit output */ + value[0] = USBVISION_8_422_SYNC; + } else { + /* I'm sure only about d2-d0 [010] 16 bit 4:2:2 usin sync pulses + * as that is how saa7111 is configured */ + value[0] = USBVISION_16_422_SYNC; + /* | USBVISION_VSNC_POL | USBVISION_VCLK_POL);*/ + } + + rc = usbvision_write_reg(usbvision, USBVISION_VIN_REG1, value[0]); + if (rc < 0) { + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + return rc; + } + + + if (usbvision->tvnorm_id & V4L2_STD_PAL) { + value[0] = 0xC0; + value[1] = 0x02; /* 0x02C0 -> 704 Input video line length */ + value[2] = 0x20; + value[3] = 0x01; /* 0x0120 -> 288 Input video n. of lines */ + value[4] = 0x60; + value[5] = 0x00; /* 0x0060 -> 96 Input video h offset */ + value[6] = 0x16; + value[7] = 0x00; /* 0x0016 -> 22 Input video v offset */ + } else if (usbvision->tvnorm_id & V4L2_STD_SECAM) { + value[0] = 0xC0; + value[1] = 0x02; /* 0x02C0 -> 704 Input video line length */ + value[2] = 0x20; + value[3] = 0x01; /* 0x0120 -> 288 Input video n. of lines */ + value[4] = 0x01; + value[5] = 0x00; /* 0x0001 -> 01 Input video h offset */ + value[6] = 0x01; + value[7] = 0x00; /* 0x0001 -> 01 Input video v offset */ + } else { /* V4L2_STD_NTSC */ + value[0] = 0xD0; + value[1] = 0x02; /* 0x02D0 -> 720 Input video line length */ + value[2] = 0xF0; + value[3] = 0x00; /* 0x00F0 -> 240 Input video number of lines */ + value[4] = 0x50; + value[5] = 0x00; /* 0x0050 -> 80 Input video h offset */ + value[6] = 0x10; + value[7] = 0x00; /* 0x0010 -> 16 Input video v offset */ + } + + /* webcam is only 480 pixels wide, both PAL and NTSC version */ + if (usbvision_device_data[usbvision->dev_model].codec == CODEC_WEBCAM) { + value[0] = 0xe0; + value[1] = 0x01; /* 0x01E0 -> 480 Input video line length */ + } + + if (usbvision_device_data[usbvision->dev_model].x_offset >= 0) { + value[4] = usbvision_device_data[usbvision->dev_model].x_offset & 0xff; + value[5] = (usbvision_device_data[usbvision->dev_model].x_offset & 0x0300) >> 8; + } + + if (adjust_x_offset != -1) { + value[4] = adjust_x_offset & 0xff; + value[5] = (adjust_x_offset & 0x0300) >> 8; + } + + if (usbvision_device_data[usbvision->dev_model].y_offset >= 0) { + value[6] = usbvision_device_data[usbvision->dev_model].y_offset & 0xff; + value[7] = (usbvision_device_data[usbvision->dev_model].y_offset & 0x0300) >> 8; + } + + if (adjust_y_offset != -1) { + value[6] = adjust_y_offset & 0xff; + value[7] = (adjust_y_offset & 0x0300) >> 8; + } + + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, /* USBVISION specific code */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_LXSIZE_I, value, 8, HZ); + if (rc < 0) { + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + return rc; + } + + + dvi_yuv_value = 0x00; /* U comes after V, Ya comes after U/V, Yb comes after Yb */ + + if (usbvision_device_data[usbvision->dev_model].dvi_yuv_override) { + dvi_yuv_value = usbvision_device_data[usbvision->dev_model].dvi_yuv; + } else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) { + /* This changes as the fine sync control changes. Further investigation necessary */ + dvi_yuv_value = 0x06; + } + + return usbvision_write_reg(usbvision, USBVISION_DVI_YUV, dvi_yuv_value); +} + + +/* + * usbvision_set_dram_settings() + * + * Set the buffer address needed by the usbvision dram to operate + * This values has been taken with usbsnoop. + * + */ + +static int usbvision_set_dram_settings(struct usb_usbvision *usbvision) +{ + int rc; + unsigned char value[8]; + + if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) { + value[0] = 0x42; + value[1] = 0x71; + value[2] = 0xff; + value[3] = 0x00; + value[4] = 0x98; + value[5] = 0xe0; + value[6] = 0x71; + value[7] = 0xff; + /* UR: 0x0E200-0x3FFFF = 204288 Words (1 Word = 2 Byte) */ + /* FDL: 0x00000-0x0E099 = 57498 Words */ + /* VDW: 0x0E3FF-0x3FFFF */ + } else { + value[0] = 0x42; + value[1] = 0x00; + value[2] = 0xff; + value[3] = 0x00; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; + value[7] = 0xff; + } + /* These are the values of the address of the video buffer, + * they have to be loaded into the USBVISION_DRM_PRM1-8 + * + * Start address of video output buffer for read: drm_prm1-2 -> 0x00000 + * End address of video output buffer for read: drm_prm1-3 -> 0x1ffff + * Start address of video frame delay buffer: drm_prm1-4 -> 0x20000 + * Only used in compressed mode + * End address of video frame delay buffer: drm_prm1-5-6 -> 0x3ffff + * Only used in compressed mode + * Start address of video output buffer for write: drm_prm1-7 -> 0x00000 + * End address of video output buffer for write: drm_prm1-8 -> 0x1ffff + */ + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, /* USBVISION specific code */ + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_DRM_PRM1, value, 8, HZ); + + if (rc < 0) { + dev_err(&usbvision->dev->dev, "%s: ERROR=%d\n", __func__, rc); + return rc; + } + + /* Restart the video buffer logic */ + rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, USBVISION_RES_UR | + USBVISION_RES_FDL | USBVISION_RES_VDW); + if (rc < 0) + return rc; + rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, 0x00); + + return rc; +} + +/* + * () + * + * Power on the device, enables suspend-resume logic + * & reset the isoc End-Point + * + */ + +int usbvision_power_on(struct usb_usbvision *usbvision) +{ + int err_code = 0; + + PDEBUG(DBG_FUNC, ""); + + usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN); + usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_RES2); + + if (usbvision_device_data[usbvision->dev_model].codec == CODEC_WEBCAM) { + usbvision_write_reg(usbvision, USBVISION_VIN_REG1, + USBVISION_16_422_SYNC | USBVISION_HVALID_PO); + usbvision_write_reg(usbvision, USBVISION_VIN_REG2, + USBVISION_NOHVALID | USBVISION_KEEP_BLANK); + } + usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_PWR_VID); + mdelay(10); + err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_PWR_VID | USBVISION_RES2); + if (err_code == 1) + usbvision->power = 1; + PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code < 0) ? "ERROR" : "power is on", err_code); + return err_code; +} + + +/* + * usbvision timer stuff + */ + +/* to call usbvision_power_off from task queue */ +static void call_usbvision_power_off(struct work_struct *work) +{ + struct usb_usbvision *usbvision = container_of(work, struct usb_usbvision, power_off_work); + + PDEBUG(DBG_FUNC, ""); + if (mutex_lock_interruptible(&usbvision->v4l2_lock)) + return; + + if (usbvision->user == 0) { + usbvision_i2c_unregister(usbvision); + + usbvision_power_off(usbvision); + usbvision->initialized = 0; + } + mutex_unlock(&usbvision->v4l2_lock); +} + +static void usbvision_power_off_timer(unsigned long data) +{ + struct usb_usbvision *usbvision = (void *)data; + + PDEBUG(DBG_FUNC, ""); + del_timer(&usbvision->power_off_timer); + INIT_WORK(&usbvision->power_off_work, call_usbvision_power_off); + (void) schedule_work(&usbvision->power_off_work); +} + +void usbvision_init_power_off_timer(struct usb_usbvision *usbvision) +{ + init_timer(&usbvision->power_off_timer); + usbvision->power_off_timer.data = (long)usbvision; + usbvision->power_off_timer.function = usbvision_power_off_timer; +} + +void usbvision_set_power_off_timer(struct usb_usbvision *usbvision) +{ + mod_timer(&usbvision->power_off_timer, jiffies + USBVISION_POWEROFF_TIME); +} + +void usbvision_reset_power_off_timer(struct usb_usbvision *usbvision) +{ + if (timer_pending(&usbvision->power_off_timer)) + del_timer(&usbvision->power_off_timer); +} + +/* + * usbvision_begin_streaming() + * Sure you have to put bit 7 to 0, if not incoming frames are droped, but no + * idea about the rest + */ +int usbvision_begin_streaming(struct usb_usbvision *usbvision) +{ + if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) + usbvision_init_compression(usbvision); + return usbvision_write_reg(usbvision, USBVISION_VIN_REG2, + USBVISION_NOHVALID | usbvision->vin_reg2_preset); +} + +/* + * usbvision_restart_isoc() + * Not sure yet if touching here PWR_REG make loose the config + */ + +int usbvision_restart_isoc(struct usb_usbvision *usbvision) +{ + int ret; + + ret = usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_PWR_VID); + if (ret < 0) + return ret; + ret = usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_PWR_VID | + USBVISION_RES2); + if (ret < 0) + return ret; + ret = usbvision_write_reg(usbvision, USBVISION_VIN_REG2, + USBVISION_KEEP_BLANK | USBVISION_NOHVALID | + usbvision->vin_reg2_preset); + if (ret < 0) + return ret; + + /* TODO: schedule timeout */ + while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) & 0x01) != 1) + ; + + return 0; +} + +int usbvision_audio_off(struct usb_usbvision *usbvision) +{ + if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, USBVISION_AUDIO_MUTE) < 0) { + printk(KERN_ERR "usbvision_audio_off: can't write reg\n"); + return -1; + } + usbvision->audio_mute = 0; + usbvision->audio_channel = USBVISION_AUDIO_MUTE; + return 0; +} + +int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel) +{ + if (!usbvision->audio_mute) { + if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, audio_channel) < 0) { + printk(KERN_ERR "usbvision_set_audio: can't write iopin register for audio switching\n"); + return -1; + } + } + usbvision->audio_channel = audio_channel; + return 0; +} + +int usbvision_setup(struct usb_usbvision *usbvision, int format) +{ + if (usbvision_device_data[usbvision->dev_model].codec == CODEC_WEBCAM) + usbvision_init_webcam(usbvision); + usbvision_set_video_format(usbvision, format); + usbvision_set_dram_settings(usbvision); + usbvision_set_compress_params(usbvision); + usbvision_set_input(usbvision); + usbvision_set_output(usbvision, MAX_USB_WIDTH, MAX_USB_HEIGHT); + usbvision_restart_isoc(usbvision); + + /* cosas del PCM */ + return USBVISION_IS_OPERATIONAL(usbvision); +} + +int usbvision_set_alternate(struct usb_usbvision *dev) +{ + int err_code, prev_alt = dev->iface_alt; + int i; + + dev->iface_alt = 0; + for (i = 0; i < dev->num_alt; i++) + if (dev->alt_max_pkt_size[i] > dev->alt_max_pkt_size[dev->iface_alt]) + dev->iface_alt = i; + + if (dev->iface_alt != prev_alt) { + dev->isoc_packet_size = dev->alt_max_pkt_size[dev->iface_alt]; + PDEBUG(DBG_FUNC, "setting alternate %d with max_packet_size=%u", + dev->iface_alt, dev->isoc_packet_size); + err_code = usb_set_interface(dev->dev, dev->iface, dev->iface_alt); + if (err_code < 0) { + dev_err(&dev->dev->dev, + "cannot change alternate number to %d (error=%i)\n", + dev->iface_alt, err_code); + return err_code; + } + } + + PDEBUG(DBG_ISOC, "ISO Packet Length:%d", dev->isoc_packet_size); + + return 0; +} + +/* + * usbvision_init_isoc() + * + */ +int usbvision_init_isoc(struct usb_usbvision *usbvision) +{ + struct usb_device *dev = usbvision->dev; + int buf_idx, err_code, reg_value; + int sb_size; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return -EFAULT; + + usbvision->cur_frame = NULL; + scratch_reset(usbvision); + + /* Alternate interface 1 is is the biggest frame size */ + err_code = usbvision_set_alternate(usbvision); + if (err_code < 0) { + usbvision->last_error = err_code; + return -EBUSY; + } + sb_size = USBVISION_URB_FRAMES * usbvision->isoc_packet_size; + + reg_value = (16 - usbvision_read_reg(usbvision, + USBVISION_ALTER_REG)) & 0x0F; + + usbvision->usb_bandwidth = reg_value >> 1; + PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec", + usbvision->usb_bandwidth); + + + + /* We double buffer the Iso lists */ + + for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) { + int j, k; + struct urb *urb; + + urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); + if (urb == NULL) { + dev_err(&usbvision->dev->dev, + "%s: usb_alloc_urb() failed\n", __func__); + return -ENOMEM; + } + usbvision->sbuf[buf_idx].urb = urb; + usbvision->sbuf[buf_idx].data = + usb_alloc_coherent(usbvision->dev, + sb_size, + GFP_KERNEL, + &urb->transfer_dma); + urb->dev = dev; + urb->context = usbvision; + urb->pipe = usb_rcvisocpipe(dev, usbvision->video_endp); + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->interval = 1; + urb->transfer_buffer = usbvision->sbuf[buf_idx].data; + urb->complete = usbvision_isoc_irq; + urb->number_of_packets = USBVISION_URB_FRAMES; + urb->transfer_buffer_length = + usbvision->isoc_packet_size * USBVISION_URB_FRAMES; + for (j = k = 0; j < USBVISION_URB_FRAMES; j++, + k += usbvision->isoc_packet_size) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = + usbvision->isoc_packet_size; + } + } + + /* Submit all URBs */ + for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) { + err_code = usb_submit_urb(usbvision->sbuf[buf_idx].urb, + GFP_KERNEL); + if (err_code) { + dev_err(&usbvision->dev->dev, + "%s: usb_submit_urb(%d) failed: error %d\n", + __func__, buf_idx, err_code); + } + } + + usbvision->streaming = stream_idle; + PDEBUG(DBG_ISOC, "%s: streaming=1 usbvision->video_endp=$%02x", + __func__, + usbvision->video_endp); + return 0; +} + +/* + * usbvision_stop_isoc() + * + * This procedure stops streaming and deallocates URBs. Then it + * activates zero-bandwidth alt. setting of the video interface. + * + */ +void usbvision_stop_isoc(struct usb_usbvision *usbvision) +{ + int buf_idx, err_code, reg_value; + int sb_size = USBVISION_URB_FRAMES * usbvision->isoc_packet_size; + + if ((usbvision->streaming == stream_off) || (usbvision->dev == NULL)) + return; + + /* Unschedule all of the iso td's */ + for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) { + usb_kill_urb(usbvision->sbuf[buf_idx].urb); + if (usbvision->sbuf[buf_idx].data) { + usb_free_coherent(usbvision->dev, + sb_size, + usbvision->sbuf[buf_idx].data, + usbvision->sbuf[buf_idx].urb->transfer_dma); + } + usb_free_urb(usbvision->sbuf[buf_idx].urb); + usbvision->sbuf[buf_idx].urb = NULL; + } + + PDEBUG(DBG_ISOC, "%s: streaming=stream_off\n", __func__); + usbvision->streaming = stream_off; + + if (!usbvision->remove_pending) { + /* Set packet size to 0 */ + usbvision->iface_alt = 0; + err_code = usb_set_interface(usbvision->dev, usbvision->iface, + usbvision->iface_alt); + if (err_code < 0) { + dev_err(&usbvision->dev->dev, + "%s: usb_set_interface() failed: error %d\n", + __func__, err_code); + usbvision->last_error = err_code; + } + reg_value = (16-usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F; + usbvision->isoc_packet_size = + (reg_value == 0) ? 0 : (reg_value * 64) - 1; + PDEBUG(DBG_ISOC, "ISO Packet Length:%d", + usbvision->isoc_packet_size); + + usbvision->usb_bandwidth = reg_value >> 1; + PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec", + usbvision->usb_bandwidth); + } +} + +int usbvision_muxsel(struct usb_usbvision *usbvision, int channel) +{ + /* inputs #0 and #3 are constant for every SAA711x. */ + /* inputs #1 and #2 are variable for SAA7111 and SAA7113 */ + int mode[4] = { SAA7115_COMPOSITE0, 0, 0, SAA7115_COMPOSITE3 }; + int audio[] = { 1, 0, 0, 0 }; + /* channel 0 is TV with audiochannel 1 (tuner mono) */ + /* channel 1 is Composite with audio channel 0 (line in) */ + /* channel 2 is S-Video with audio channel 0 (line in) */ + /* channel 3 is additional video inputs to the device with audio channel 0 (line in) */ + + RESTRICT_TO_RANGE(channel, 0, usbvision->video_inputs); + usbvision->ctl_input = channel; + + /* set the new channel */ + /* Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video */ + /* Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red */ + + switch (usbvision_device_data[usbvision->dev_model].codec) { + case CODEC_SAA7113: + mode[1] = SAA7115_COMPOSITE2; + if (switch_svideo_input) { + /* To handle problems with S-Video Input for + * some devices. Use switch_svideo_input + * parameter when loading the module.*/ + mode[2] = SAA7115_COMPOSITE1; + } else { + mode[2] = SAA7115_SVIDEO1; + } + break; + case CODEC_SAA7111: + default: + /* modes for saa7111 */ + mode[1] = SAA7115_COMPOSITE1; + mode[2] = SAA7115_SVIDEO1; + break; + } + call_all(usbvision, video, s_routing, mode[channel], 0, 0); + usbvision_set_audio(usbvision, audio[channel]); + return 0; +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/usb/usbvision/usbvision-i2c.c b/drivers/media/usb/usbvision/usbvision-i2c.c new file mode 100644 index 000000000000..89fec029e924 --- /dev/null +++ b/drivers/media/usb/usbvision/usbvision-i2c.c @@ -0,0 +1,456 @@ +/* + * usbvision_i2c.c + * i2c algorithm for USB-I2C Bridges + * + * Copyright (c) 1999-2007 Joerg Heckenbach + * Dwaine Garden + * + * This module is part of usbvision driver project. + * Updates to driver completed by Dwaine P. Garden + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "usbvision.h" + +#define DBG_I2C (1 << 0) + +static int i2c_debug; + +module_param(i2c_debug, int, 0644); /* debug_i2c_usb mode of the device driver */ +MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); + +#define PDEBUG(level, fmt, args...) { \ + if (i2c_debug & (level)) \ + printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ + __func__, __LINE__ , ## args); \ + } + +static int usbvision_i2c_write(struct usb_usbvision *usbvision, unsigned char addr, char *buf, + short len); +static int usbvision_i2c_read(struct usb_usbvision *usbvision, unsigned char addr, char *buf, + short len); + +static inline int try_write_address(struct i2c_adapter *i2c_adap, + unsigned char addr, int retries) +{ + struct usb_usbvision *usbvision; + int i, ret = -1; + char buf[4]; + + usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap); + buf[0] = 0x00; + for (i = 0; i <= retries; i++) { + ret = (usbvision_i2c_write(usbvision, addr, buf, 1)); + if (ret == 1) + break; /* success! */ + udelay(5); + if (i == retries) /* no success */ + break; + udelay(10); + } + if (i) { + PDEBUG(DBG_I2C, "Needed %d retries for address %#2x", i, addr); + PDEBUG(DBG_I2C, "Maybe there's no device at this address"); + } + return ret; +} + +static inline int try_read_address(struct i2c_adapter *i2c_adap, + unsigned char addr, int retries) +{ + struct usb_usbvision *usbvision; + int i, ret = -1; + char buf[4]; + + usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap); + for (i = 0; i <= retries; i++) { + ret = (usbvision_i2c_read(usbvision, addr, buf, 1)); + if (ret == 1) + break; /* success! */ + udelay(5); + if (i == retries) /* no success */ + break; + udelay(10); + } + if (i) { + PDEBUG(DBG_I2C, "Needed %d retries for address %#2x", i, addr); + PDEBUG(DBG_I2C, "Maybe there's no device at this address"); + } + return ret; +} + +static inline int usb_find_address(struct i2c_adapter *i2c_adap, + struct i2c_msg *msg, int retries, + unsigned char *add) +{ + unsigned short flags = msg->flags; + + unsigned char addr; + int ret; + + addr = (msg->addr << 1); + if (flags & I2C_M_RD) + addr |= 1; + + add[0] = addr; + if (flags & I2C_M_RD) + ret = try_read_address(i2c_adap, addr, retries); + else + ret = try_write_address(i2c_adap, addr, retries); + + if (ret != 1) + return -EREMOTEIO; + + return 0; +} + +static int +usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) +{ + struct i2c_msg *pmsg; + struct usb_usbvision *usbvision; + int i, ret; + unsigned char addr = 0; + + usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap); + + for (i = 0; i < num; i++) { + pmsg = &msgs[i]; + ret = usb_find_address(i2c_adap, pmsg, i2c_adap->retries, &addr); + if (ret != 0) { + PDEBUG(DBG_I2C, "got NAK from device, message #%d", i); + return (ret < 0) ? ret : -EREMOTEIO; + } + + if (pmsg->flags & I2C_M_RD) { + /* read bytes into buffer */ + ret = (usbvision_i2c_read(usbvision, addr, pmsg->buf, pmsg->len)); + if (ret < pmsg->len) + return (ret < 0) ? ret : -EREMOTEIO; + } else { + /* write bytes from buffer */ + ret = (usbvision_i2c_write(usbvision, addr, pmsg->buf, pmsg->len)); + if (ret < pmsg->len) + return (ret < 0) ? ret : -EREMOTEIO; + } + } + return num; +} + +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +/* -----exported algorithm data: ------------------------------------- */ + +static struct i2c_algorithm usbvision_algo = { + .master_xfer = usbvision_i2c_xfer, + .smbus_xfer = NULL, + .functionality = functionality, +}; + + +/* ----------------------------------------------------------------------- */ +/* usbvision specific I2C functions */ +/* ----------------------------------------------------------------------- */ +static struct i2c_adapter i2c_adap_template; + +int usbvision_i2c_register(struct usb_usbvision *usbvision) +{ + static unsigned short saa711x_addrs[] = { + 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */ + 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */ + I2C_CLIENT_END }; + + if (usbvision->registered_i2c) + return 0; + + memcpy(&usbvision->i2c_adap, &i2c_adap_template, + sizeof(struct i2c_adapter)); + + sprintf(usbvision->i2c_adap.name, "%s-%d-%s", i2c_adap_template.name, + usbvision->dev->bus->busnum, usbvision->dev->devpath); + PDEBUG(DBG_I2C, "Adaptername: %s", usbvision->i2c_adap.name); + usbvision->i2c_adap.dev.parent = &usbvision->dev->dev; + + i2c_set_adapdata(&usbvision->i2c_adap, &usbvision->v4l2_dev); + + if (usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_IIC_LRNACK) < 0) { + printk(KERN_ERR "usbvision_i2c_register: can't write reg\n"); + return -EBUSY; + } + + PDEBUG(DBG_I2C, "I2C debugging is enabled [i2c]"); + PDEBUG(DBG_I2C, "ALGO debugging is enabled [i2c]"); + + /* register new adapter to i2c module... */ + + usbvision->i2c_adap.algo = &usbvision_algo; + + usbvision->i2c_adap.timeout = 100; /* default values, should */ + usbvision->i2c_adap.retries = 3; /* be replaced by defines */ + + i2c_add_adapter(&usbvision->i2c_adap); + + PDEBUG(DBG_I2C, "i2c bus for %s registered", usbvision->i2c_adap.name); + + /* Request the load of the i2c modules we need */ + switch (usbvision_device_data[usbvision->dev_model].codec) { + case CODEC_SAA7113: + case CODEC_SAA7111: + /* Without this delay the detection of the saa711x is + hit-and-miss. */ + mdelay(10); + v4l2_i2c_new_subdev(&usbvision->v4l2_dev, + &usbvision->i2c_adap, + "saa7115_auto", 0, saa711x_addrs); + break; + } + if (usbvision_device_data[usbvision->dev_model].tuner == 1) { + struct v4l2_subdev *sd; + enum v4l2_i2c_tuner_type type; + struct tuner_setup tun_setup; + + sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev, + &usbvision->i2c_adap, + "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); + /* depending on whether we found a demod or not, select + the tuner type. */ + type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; + + sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev, + &usbvision->i2c_adap, + "tuner", 0, v4l2_i2c_tuner_addrs(type)); + + if (sd == NULL) + return -ENODEV; + if (usbvision->tuner_type != -1) { + tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; + tun_setup.type = usbvision->tuner_type; + tun_setup.addr = v4l2_i2c_subdev_addr(sd); + call_all(usbvision, tuner, s_type_addr, &tun_setup); + } + } + usbvision->registered_i2c = 1; + + return 0; +} + +int usbvision_i2c_unregister(struct usb_usbvision *usbvision) +{ + if (!usbvision->registered_i2c) + return 0; + + i2c_del_adapter(&(usbvision->i2c_adap)); + usbvision->registered_i2c = 0; + + PDEBUG(DBG_I2C, "i2c bus for %s unregistered", usbvision->i2c_adap.name); + + return 0; +} + +static int +usbvision_i2c_read_max4(struct usb_usbvision *usbvision, unsigned char addr, + char *buf, short len) +{ + int rc, retries; + + for (retries = 5;;) { + rc = usbvision_write_reg(usbvision, USBVISION_SER_ADRS, addr); + if (rc < 0) + return rc; + + /* Initiate byte read cycle */ + /* USBVISION_SER_CONT <- d0-d2 n. of bytes to r/w */ + /* d3 0=Wr 1=Rd */ + rc = usbvision_write_reg(usbvision, USBVISION_SER_CONT, + (len & 0x07) | 0x18); + if (rc < 0) + return rc; + + /* Test for Busy and ACK */ + do { + /* USBVISION_SER_CONT -> d4 == 0 busy */ + rc = usbvision_read_reg(usbvision, USBVISION_SER_CONT); + } while (rc > 0 && ((rc & 0x10) != 0)); /* Retry while busy */ + if (rc < 0) + return rc; + + /* USBVISION_SER_CONT -> d5 == 1 Not ack */ + if ((rc & 0x20) == 0) /* Ack? */ + break; + + /* I2C abort */ + rc = usbvision_write_reg(usbvision, USBVISION_SER_CONT, 0x00); + if (rc < 0) + return rc; + + if (--retries < 0) + return -1; + } + + switch (len) { + case 4: + buf[3] = usbvision_read_reg(usbvision, USBVISION_SER_DAT4); + case 3: + buf[2] = usbvision_read_reg(usbvision, USBVISION_SER_DAT3); + case 2: + buf[1] = usbvision_read_reg(usbvision, USBVISION_SER_DAT2); + case 1: + buf[0] = usbvision_read_reg(usbvision, USBVISION_SER_DAT1); + break; + default: + printk(KERN_ERR + "usbvision_i2c_read_max4: buffer length > 4\n"); + } + + if (i2c_debug & DBG_I2C) { + int idx; + + for (idx = 0; idx < len; idx++) + PDEBUG(DBG_I2C, "read %x from address %x", (unsigned char)buf[idx], addr); + } + return len; +} + + +static int usbvision_i2c_write_max4(struct usb_usbvision *usbvision, + unsigned char addr, const char *buf, + short len) +{ + int rc, retries; + int i; + unsigned char value[6]; + unsigned char ser_cont; + + ser_cont = (len & 0x07) | 0x10; + + value[0] = addr; + value[1] = ser_cont; + for (i = 0; i < len; i++) + value[i + 2] = buf[i]; + + for (retries = 5;;) { + rc = usb_control_msg(usbvision->dev, + usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_SER_ADRS, value, + len + 2, HZ); + + if (rc < 0) + return rc; + + rc = usbvision_write_reg(usbvision, USBVISION_SER_CONT, + (len & 0x07) | 0x10); + if (rc < 0) + return rc; + + /* Test for Busy and ACK */ + do { + rc = usbvision_read_reg(usbvision, USBVISION_SER_CONT); + } while (rc > 0 && ((rc & 0x10) != 0)); /* Retry while busy */ + if (rc < 0) + return rc; + + if ((rc & 0x20) == 0) /* Ack? */ + break; + + /* I2C abort */ + usbvision_write_reg(usbvision, USBVISION_SER_CONT, 0x00); + + if (--retries < 0) + return -1; + + } + + if (i2c_debug & DBG_I2C) { + int idx; + + for (idx = 0; idx < len; idx++) + PDEBUG(DBG_I2C, "wrote %x at address %x", (unsigned char)buf[idx], addr); + } + return len; +} + +static int usbvision_i2c_write(struct usb_usbvision *usbvision, unsigned char addr, char *buf, + short len) +{ + char *buf_ptr = buf; + int retval; + int wrcount = 0; + int count; + int max_len = 4; + + while (len > 0) { + count = (len > max_len) ? max_len : len; + retval = usbvision_i2c_write_max4(usbvision, addr, buf_ptr, count); + if (retval > 0) { + len -= count; + buf_ptr += count; + wrcount += count; + } else + return (retval < 0) ? retval : -EFAULT; + } + return wrcount; +} + +static int usbvision_i2c_read(struct usb_usbvision *usbvision, unsigned char addr, char *buf, + short len) +{ + char temp[4]; + int retval, i; + int rdcount = 0; + int count; + + while (len > 0) { + count = (len > 3) ? 4 : len; + retval = usbvision_i2c_read_max4(usbvision, addr, temp, count); + if (retval > 0) { + for (i = 0; i < len; i++) + buf[rdcount + i] = temp[i]; + len -= count; + rdcount += count; + } else + return (retval < 0) ? retval : -EFAULT; + } + return rdcount; +} + +static struct i2c_adapter i2c_adap_template = { + .owner = THIS_MODULE, + .name = "usbvision", +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c new file mode 100644 index 000000000000..8a4317979a43 --- /dev/null +++ b/drivers/media/usb/usbvision/usbvision-video.c @@ -0,0 +1,1720 @@ +/* + * USB USBVISION Video device driver 0.9.10 + * + * + * + * Copyright (c) 1999-2005 Joerg Heckenbach + * + * This module is part of usbvision driver project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Let's call the version 0.... until compression decoding is completely + * implemented. + * + * This driver is written by Jose Ignacio Gijon and Joerg Heckenbach. + * It was based on USB CPiA driver written by Peter Pregler, + * Scott J. Bertin and Johannes Erdfelt + * Ideas are taken from bttv driver by Ralph Metzler, Marcus Metzler & + * Gerd Knorr and zoran 36120/36125 driver by Pauline Middelink + * Updates to driver completed by Dwaine P. Garden + * + * + * TODO: + * - use submit_urb for all setup packets + * - Fix memory settings for nt1004. It is 4 times as big as the + * nt1003 memory. + * - Add audio on endpoint 3 for nt1004 chip. + * Seems impossible, needs a codec interface. Which one? + * - Clean up the driver. + * - optimization for performance. + * - Add Videotext capability (VBI). Working on it..... + * - Check audio for other devices + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "usbvision.h" +#include "usbvision-cards.h" + +#define DRIVER_AUTHOR \ + "Joerg Heckenbach , " \ + "Dwaine Garden " +#define DRIVER_NAME "usbvision" +#define DRIVER_ALIAS "USBVision" +#define DRIVER_DESC "USBVision USB Video Device Driver for Linux" +#define DRIVER_LICENSE "GPL" +#define USBVISION_VERSION_STRING "0.9.11" + +#define ENABLE_HEXDUMP 0 /* Enable if you need it */ + + +#ifdef USBVISION_DEBUG + #define PDEBUG(level, fmt, args...) { \ + if (video_debug & (level)) \ + printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \ + __func__, __LINE__ , ## args); \ + } +#else + #define PDEBUG(level, fmt, args...) do {} while (0) +#endif + +#define DBG_IO (1 << 1) +#define DBG_PROBE (1 << 2) +#define DBG_MMAP (1 << 3) + +/* String operations */ +#define rmspace(str) while (*str == ' ') str++; +#define goto2next(str) while (*str != ' ') str++; while (*str == ' ') str++; + + +/* sequential number of usbvision device */ +static int usbvision_nr; + +static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = { + { 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" }, + { 1, 2, 16, V4L2_PIX_FMT_RGB565 , "RGB565" }, + { 1, 3, 24, V4L2_PIX_FMT_RGB24 , "RGB24" }, + { 1, 4, 32, V4L2_PIX_FMT_RGB32 , "RGB32" }, + { 1, 2, 16, V4L2_PIX_FMT_RGB555 , "RGB555" }, + { 1, 2, 16, V4L2_PIX_FMT_YUYV , "YUV422" }, + { 1, 2, 12, V4L2_PIX_FMT_YVU420 , "YUV420P" }, /* 1.5 ! */ + { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" } +}; + +/* Function prototypes */ +static void usbvision_release(struct usb_usbvision *usbvision); + +/* Default initialization of device driver parameters */ +/* Set the default format for ISOC endpoint */ +static int isoc_mode = ISOC_MODE_COMPRESS; +/* Set the default Debug Mode of the device driver */ +static int video_debug; +/* Set the default device to power on at startup */ +static int power_on_at_open = 1; +/* Sequential Number of Video Device */ +static int video_nr = -1; +/* Sequential Number of Radio Device */ +static int radio_nr = -1; + +/* Grab parameters for the device driver */ + +/* Showing parameters under SYSFS */ +module_param(isoc_mode, int, 0444); +module_param(video_debug, int, 0444); +module_param(power_on_at_open, int, 0444); +module_param(video_nr, int, 0444); +module_param(radio_nr, int, 0444); + +MODULE_PARM_DESC(isoc_mode, " Set the default format for ISOC endpoint. Default: 0x60 (Compression On)"); +MODULE_PARM_DESC(video_debug, " Set the default Debug Mode of the device driver. Default: 0 (Off)"); +MODULE_PARM_DESC(power_on_at_open, " Set the default device to power on when device is opened. Default: 1 (On)"); +MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX). Default: -1 (autodetect)"); +MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)"); + + +/* Misc stuff */ +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); +MODULE_VERSION(USBVISION_VERSION_STRING); +MODULE_ALIAS(DRIVER_ALIAS); + + +/*****************************************************************************/ +/* SYSFS Code - Copied from the stv680.c usb module. */ +/* Device information is located at /sys/class/video4linux/video0 */ +/* Device parameters information is located at /sys/module/usbvision */ +/* Device USB Information is located at */ +/* /sys/bus/usb/drivers/USBVision Video Grabber */ +/*****************************************************************************/ + +#define YES_NO(x) ((x) ? "Yes" : "No") + +static inline struct usb_usbvision *cd_to_usbvision(struct device *cd) +{ + struct video_device *vdev = + container_of(cd, struct video_device, dev); + return video_get_drvdata(vdev); +} + +static ssize_t show_version(struct device *cd, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%s\n", USBVISION_VERSION_STRING); +} +static DEVICE_ATTR(version, S_IRUGO, show_version, NULL); + +static ssize_t show_model(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = + container_of(cd, struct video_device, dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + return sprintf(buf, "%s\n", + usbvision_device_data[usbvision->dev_model].model_string); +} +static DEVICE_ATTR(model, S_IRUGO, show_model, NULL); + +static ssize_t show_hue(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = + container_of(cd, struct video_device, dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + struct v4l2_control ctrl; + ctrl.id = V4L2_CID_HUE; + ctrl.value = 0; + if (usbvision->user) + call_all(usbvision, core, g_ctrl, &ctrl); + return sprintf(buf, "%d\n", ctrl.value); +} +static DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL); + +static ssize_t show_contrast(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = + container_of(cd, struct video_device, dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + struct v4l2_control ctrl; + ctrl.id = V4L2_CID_CONTRAST; + ctrl.value = 0; + if (usbvision->user) + call_all(usbvision, core, g_ctrl, &ctrl); + return sprintf(buf, "%d\n", ctrl.value); +} +static DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL); + +static ssize_t show_brightness(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = + container_of(cd, struct video_device, dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + struct v4l2_control ctrl; + ctrl.id = V4L2_CID_BRIGHTNESS; + ctrl.value = 0; + if (usbvision->user) + call_all(usbvision, core, g_ctrl, &ctrl); + return sprintf(buf, "%d\n", ctrl.value); +} +static DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL); + +static ssize_t show_saturation(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = + container_of(cd, struct video_device, dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + struct v4l2_control ctrl; + ctrl.id = V4L2_CID_SATURATION; + ctrl.value = 0; + if (usbvision->user) + call_all(usbvision, core, g_ctrl, &ctrl); + return sprintf(buf, "%d\n", ctrl.value); +} +static DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL); + +static ssize_t show_streaming(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = + container_of(cd, struct video_device, dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + return sprintf(buf, "%s\n", + YES_NO(usbvision->streaming == stream_on ? 1 : 0)); +} +static DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL); + +static ssize_t show_compression(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = + container_of(cd, struct video_device, dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + return sprintf(buf, "%s\n", + YES_NO(usbvision->isoc_mode == ISOC_MODE_COMPRESS)); +} +static DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL); + +static ssize_t show_device_bridge(struct device *cd, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = + container_of(cd, struct video_device, dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + return sprintf(buf, "%d\n", usbvision->bridge_type); +} +static DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL); + +static void usbvision_create_sysfs(struct video_device *vdev) +{ + int res; + + if (!vdev) + return; + do { + res = device_create_file(&vdev->dev, &dev_attr_version); + if (res < 0) + break; + res = device_create_file(&vdev->dev, &dev_attr_model); + if (res < 0) + break; + res = device_create_file(&vdev->dev, &dev_attr_hue); + if (res < 0) + break; + res = device_create_file(&vdev->dev, &dev_attr_contrast); + if (res < 0) + break; + res = device_create_file(&vdev->dev, &dev_attr_brightness); + if (res < 0) + break; + res = device_create_file(&vdev->dev, &dev_attr_saturation); + if (res < 0) + break; + res = device_create_file(&vdev->dev, &dev_attr_streaming); + if (res < 0) + break; + res = device_create_file(&vdev->dev, &dev_attr_compression); + if (res < 0) + break; + res = device_create_file(&vdev->dev, &dev_attr_bridge); + if (res >= 0) + return; + } while (0); + + dev_err(&vdev->dev, "%s error: %d\n", __func__, res); +} + +static void usbvision_remove_sysfs(struct video_device *vdev) +{ + if (vdev) { + device_remove_file(&vdev->dev, &dev_attr_version); + device_remove_file(&vdev->dev, &dev_attr_model); + device_remove_file(&vdev->dev, &dev_attr_hue); + device_remove_file(&vdev->dev, &dev_attr_contrast); + device_remove_file(&vdev->dev, &dev_attr_brightness); + device_remove_file(&vdev->dev, &dev_attr_saturation); + device_remove_file(&vdev->dev, &dev_attr_streaming); + device_remove_file(&vdev->dev, &dev_attr_compression); + device_remove_file(&vdev->dev, &dev_attr_bridge); + } +} + +/* + * usbvision_open() + * + * This is part of Video 4 Linux API. The driver can be opened by one + * client only (checks internal counter 'usbvision->user'). The procedure + * then allocates buffers needed for video processing. + * + */ +static int usbvision_v4l2_open(struct file *file) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int err_code = 0; + + PDEBUG(DBG_IO, "open"); + + if (mutex_lock_interruptible(&usbvision->v4l2_lock)) + return -ERESTARTSYS; + usbvision_reset_power_off_timer(usbvision); + + if (usbvision->user) + err_code = -EBUSY; + else { + /* Allocate memory for the scratch ring buffer */ + err_code = usbvision_scratch_alloc(usbvision); + if (isoc_mode == ISOC_MODE_COMPRESS) { + /* Allocate intermediate decompression buffers + only if needed */ + err_code = usbvision_decompress_alloc(usbvision); + } + if (err_code) { + /* Deallocate all buffers if trouble */ + usbvision_scratch_free(usbvision); + usbvision_decompress_free(usbvision); + } + } + + /* If so far no errors then we shall start the camera */ + if (!err_code) { + if (usbvision->power == 0) { + usbvision_power_on(usbvision); + usbvision_i2c_register(usbvision); + } + + /* Send init sequence only once, it's large! */ + if (!usbvision->initialized) { + int setup_ok = 0; + setup_ok = usbvision_setup(usbvision, isoc_mode); + if (setup_ok) + usbvision->initialized = 1; + else + err_code = -EBUSY; + } + + if (!err_code) { + usbvision_begin_streaming(usbvision); + err_code = usbvision_init_isoc(usbvision); + /* device must be initialized before isoc transfer */ + usbvision_muxsel(usbvision, 0); + usbvision->user++; + } else { + if (power_on_at_open) { + usbvision_i2c_unregister(usbvision); + usbvision_power_off(usbvision); + usbvision->initialized = 0; + } + } + } + + /* prepare queues */ + usbvision_empty_framequeues(usbvision); + mutex_unlock(&usbvision->v4l2_lock); + + PDEBUG(DBG_IO, "success"); + return err_code; +} + +/* + * usbvision_v4l2_close() + * + * This is part of Video 4 Linux API. The procedure + * stops streaming and deallocates all buffers that were earlier + * allocated in usbvision_v4l2_open(). + * + */ +static int usbvision_v4l2_close(struct file *file) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + PDEBUG(DBG_IO, "close"); + + mutex_lock(&usbvision->v4l2_lock); + usbvision_audio_off(usbvision); + usbvision_restart_isoc(usbvision); + usbvision_stop_isoc(usbvision); + + usbvision_decompress_free(usbvision); + usbvision_frames_free(usbvision); + usbvision_empty_framequeues(usbvision); + usbvision_scratch_free(usbvision); + + usbvision->user--; + + if (power_on_at_open) { + /* power off in a little while + to avoid off/on every close/open short sequences */ + usbvision_set_power_off_timer(usbvision); + usbvision->initialized = 0; + } + + if (usbvision->remove_pending) { + printk(KERN_INFO "%s: Final disconnect\n", __func__); + usbvision_release(usbvision); + } + mutex_unlock(&usbvision->v4l2_lock); + + PDEBUG(DBG_IO, "success"); + return 0; +} + + +/* + * usbvision_ioctl() + * + * This is part of Video 4 Linux API. The procedure handles ioctl() calls. + * + */ +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vidioc_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int err_code; + + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; + /* NT100x has a 8-bit register space */ + err_code = usbvision_read_reg(usbvision, reg->reg&0xff); + if (err_code < 0) { + dev_err(&usbvision->vdev->dev, + "%s: VIDIOC_DBG_G_REGISTER failed: error %d\n", + __func__, err_code); + return err_code; + } + reg->val = err_code; + reg->size = 1; + return 0; +} + +static int vidioc_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int err_code; + + if (!v4l2_chip_match_host(®->match)) + return -EINVAL; + /* NT100x has a 8-bit register space */ + err_code = usbvision_write_reg(usbvision, reg->reg & 0xff, reg->val); + if (err_code < 0) { + dev_err(&usbvision->vdev->dev, + "%s: VIDIOC_DBG_S_REGISTER failed: error %d\n", + __func__, err_code); + return err_code; + } + return 0; +} +#endif + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *vc) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + strlcpy(vc->driver, "USBVision", sizeof(vc->driver)); + strlcpy(vc->card, + usbvision_device_data[usbvision->dev_model].model_string, + sizeof(vc->card)); + usb_make_path(usbvision->dev, vc->bus_info, sizeof(vc->bus_info)); + vc->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_AUDIO | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + (usbvision->have_tuner ? V4L2_CAP_TUNER : 0); + return 0; +} + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *vi) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int chan; + + if (vi->index >= usbvision->video_inputs) + return -EINVAL; + if (usbvision->have_tuner) + chan = vi->index; + else + chan = vi->index + 1; /* skip Television string*/ + + /* Determine the requested input characteristics + specific for each usbvision card model */ + switch (chan) { + case 0: + if (usbvision_device_data[usbvision->dev_model].video_channels == 4) { + strcpy(vi->name, "White Video Input"); + } else { + strcpy(vi->name, "Television"); + vi->type = V4L2_INPUT_TYPE_TUNER; + vi->audioset = 1; + vi->tuner = chan; + vi->std = USBVISION_NORMS; + } + break; + case 1: + vi->type = V4L2_INPUT_TYPE_CAMERA; + if (usbvision_device_data[usbvision->dev_model].video_channels == 4) + strcpy(vi->name, "Green Video Input"); + else + strcpy(vi->name, "Composite Video Input"); + vi->std = V4L2_STD_PAL; + break; + case 2: + vi->type = V4L2_INPUT_TYPE_CAMERA; + if (usbvision_device_data[usbvision->dev_model].video_channels == 4) + strcpy(vi->name, "Yellow Video Input"); + else + strcpy(vi->name, "S-Video Input"); + vi->std = V4L2_STD_PAL; + break; + case 3: + vi->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(vi->name, "Red Video Input"); + vi->std = V4L2_STD_PAL; + break; + } + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *input) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + *input = usbvision->ctl_input; + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int input) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + if (input >= usbvision->video_inputs) + return -EINVAL; + + usbvision_muxsel(usbvision, input); + usbvision_set_input(usbvision); + usbvision_set_output(usbvision, + usbvision->curwidth, + usbvision->curheight); + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + usbvision->tvnorm_id = *id; + + call_all(usbvision, core, s_std, usbvision->tvnorm_id); + /* propagate the change to the decoder */ + usbvision_muxsel(usbvision, usbvision->ctl_input); + + return 0; +} + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *vt) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + if (!usbvision->have_tuner || vt->index) /* Only tuner 0 */ + return -EINVAL; + if (usbvision->radio) { + strcpy(vt->name, "Radio"); + vt->type = V4L2_TUNER_RADIO; + } else { + strcpy(vt->name, "Television"); + } + /* Let clients fill in the remainder of this struct */ + call_all(usbvision, tuner, g_tuner, vt); + + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *vt) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + /* Only no or one tuner for now */ + if (!usbvision->have_tuner || vt->index) + return -EINVAL; + /* let clients handle this */ + call_all(usbvision, tuner, s_tuner, vt); + + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *freq) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + freq->tuner = 0; /* Only one tuner */ + if (usbvision->radio) + freq->type = V4L2_TUNER_RADIO; + else + freq->type = V4L2_TUNER_ANALOG_TV; + freq->frequency = usbvision->freq; + + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *freq) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + /* Only no or one tuner for now */ + if (!usbvision->have_tuner || freq->tuner) + return -EINVAL; + + usbvision->freq = freq->frequency; + call_all(usbvision, tuner, s_frequency, freq); + + return 0; +} + +static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + if (usbvision->radio) + strcpy(a->name, "Radio"); + else + strcpy(a->name, "TV"); + + return 0; +} + +static int vidioc_s_audio(struct file *file, void *fh, + struct v4l2_audio *a) +{ + if (a->index) + return -EINVAL; + return 0; +} + +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *ctrl) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + call_all(usbvision, core, queryctrl, ctrl); + + if (!ctrl->type) + return -EINVAL; + + return 0; +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + call_all(usbvision, core, g_ctrl, ctrl); + return 0; +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + call_all(usbvision, core, s_ctrl, ctrl); + return 0; +} + +static int vidioc_reqbufs(struct file *file, + void *priv, struct v4l2_requestbuffers *vr) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int ret; + + RESTRICT_TO_RANGE(vr->count, 1, USBVISION_NUMFRAMES); + + /* Check input validity: + the user must do a VIDEO CAPTURE and MMAP method. */ + if (vr->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (usbvision->streaming == stream_on) { + ret = usbvision_stream_interrupt(usbvision); + if (ret) + return ret; + } + + usbvision_frames_free(usbvision); + usbvision_empty_framequeues(usbvision); + vr->count = usbvision_frames_alloc(usbvision, vr->count); + + usbvision->cur_frame = NULL; + + return 0; +} + +static int vidioc_querybuf(struct file *file, + void *priv, struct v4l2_buffer *vb) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + struct usbvision_frame *frame; + + /* FIXME : must control + that buffers are mapped (VIDIOC_REQBUFS has been called) */ + if (vb->index >= usbvision->num_frames) + return -EINVAL; + /* Updating the corresponding frame state */ + vb->flags = 0; + frame = &usbvision->frame[vb->index]; + if (frame->grabstate >= frame_state_ready) + vb->flags |= V4L2_BUF_FLAG_QUEUED; + if (frame->grabstate >= frame_state_done) + vb->flags |= V4L2_BUF_FLAG_DONE; + if (frame->grabstate == frame_state_unused) + vb->flags |= V4L2_BUF_FLAG_MAPPED; + vb->memory = V4L2_MEMORY_MMAP; + + vb->m.offset = vb->index * PAGE_ALIGN(usbvision->max_frame_size); + + vb->memory = V4L2_MEMORY_MMAP; + vb->field = V4L2_FIELD_NONE; + vb->length = usbvision->curwidth * + usbvision->curheight * + usbvision->palette.bytes_per_pixel; + vb->timestamp = usbvision->frame[vb->index].timestamp; + vb->sequence = usbvision->frame[vb->index].sequence; + return 0; +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *vb) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + struct usbvision_frame *frame; + unsigned long lock_flags; + + /* FIXME : works only on VIDEO_CAPTURE MODE, MMAP. */ + if (vb->index >= usbvision->num_frames) + return -EINVAL; + + frame = &usbvision->frame[vb->index]; + + if (frame->grabstate != frame_state_unused) + return -EAGAIN; + + /* Mark it as ready and enqueue frame */ + frame->grabstate = frame_state_ready; + frame->scanstate = scan_state_scanning; + frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */ + + vb->flags &= ~V4L2_BUF_FLAG_DONE; + + /* set v4l2_format index */ + frame->v4l2_format = usbvision->palette; + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + list_add_tail(&usbvision->frame[vb->index].frame, &usbvision->inqueue); + spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); + + return 0; +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *vb) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int ret; + struct usbvision_frame *f; + unsigned long lock_flags; + + if (list_empty(&(usbvision->outqueue))) { + if (usbvision->streaming == stream_idle) + return -EINVAL; + ret = wait_event_interruptible + (usbvision->wait_frame, + !list_empty(&(usbvision->outqueue))); + if (ret) + return ret; + } + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + f = list_entry(usbvision->outqueue.next, + struct usbvision_frame, frame); + list_del(usbvision->outqueue.next); + spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); + + f->grabstate = frame_state_unused; + + vb->memory = V4L2_MEMORY_MMAP; + vb->flags = V4L2_BUF_FLAG_MAPPED | + V4L2_BUF_FLAG_QUEUED | + V4L2_BUF_FLAG_DONE; + vb->index = f->index; + vb->sequence = f->sequence; + vb->timestamp = f->timestamp; + vb->field = V4L2_FIELD_NONE; + vb->bytesused = f->scanlength; + + return 0; +} + +static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + usbvision->streaming = stream_on; + call_all(usbvision, video, s_stream, 1); + + return 0; +} + +static int vidioc_streamoff(struct file *file, + void *priv, enum v4l2_buf_type type) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (usbvision->streaming == stream_on) { + usbvision_stream_interrupt(usbvision); + /* Stop all video streamings */ + call_all(usbvision, video, s_stream, 0); + } + usbvision_empty_framequeues(usbvision); + + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *vfd) +{ + if (vfd->index >= USBVISION_SUPPORTED_PALETTES - 1) + return -EINVAL; + strcpy(vfd->description, usbvision_v4l2_format[vfd->index].desc); + vfd->pixelformat = usbvision_v4l2_format[vfd->index].format; + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *vf) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + vf->fmt.pix.width = usbvision->curwidth; + vf->fmt.pix.height = usbvision->curheight; + vf->fmt.pix.pixelformat = usbvision->palette.format; + vf->fmt.pix.bytesperline = + usbvision->curwidth * usbvision->palette.bytes_per_pixel; + vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline * usbvision->curheight; + vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */ + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *vf) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int format_idx; + + /* Find requested format in available ones */ + for (format_idx = 0; format_idx < USBVISION_SUPPORTED_PALETTES; format_idx++) { + if (vf->fmt.pix.pixelformat == + usbvision_v4l2_format[format_idx].format) { + usbvision->palette = usbvision_v4l2_format[format_idx]; + break; + } + } + /* robustness */ + if (format_idx == USBVISION_SUPPORTED_PALETTES) + return -EINVAL; + RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH); + RESTRICT_TO_RANGE(vf->fmt.pix.height, MIN_FRAME_HEIGHT, MAX_FRAME_HEIGHT); + + vf->fmt.pix.bytesperline = vf->fmt.pix.width* + usbvision->palette.bytes_per_pixel; + vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*vf->fmt.pix.height; + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *vf) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int ret; + + ret = vidioc_try_fmt_vid_cap(file, priv, vf); + if (ret) + return ret; + + /* stop io in case it is already in progress */ + if (usbvision->streaming == stream_on) { + ret = usbvision_stream_interrupt(usbvision); + if (ret) + return ret; + } + usbvision_frames_free(usbvision); + usbvision_empty_framequeues(usbvision); + + usbvision->cur_frame = NULL; + + /* by now we are committed to the new data... */ + usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height); + + return 0; +} + +static ssize_t usbvision_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int noblock = file->f_flags & O_NONBLOCK; + unsigned long lock_flags; + int ret, i; + struct usbvision_frame *frame; + + PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __func__, + (unsigned long)count, noblock); + + if (!USBVISION_IS_OPERATIONAL(usbvision) || (buf == NULL)) + return -EFAULT; + + /* This entry point is compatible with the mmap routines + so that a user can do either VIDIOC_QBUF/VIDIOC_DQBUF + to get frames or call read on the device. */ + if (!usbvision->num_frames) { + /* First, allocate some frames to work with + if this has not been done with VIDIOC_REQBUF */ + usbvision_frames_free(usbvision); + usbvision_empty_framequeues(usbvision); + usbvision_frames_alloc(usbvision, USBVISION_NUMFRAMES); + } + + if (usbvision->streaming != stream_on) { + /* no stream is running, make it running ! */ + usbvision->streaming = stream_on; + call_all(usbvision, video, s_stream, 1); + } + + /* Then, enqueue as many frames as possible + (like a user of VIDIOC_QBUF would do) */ + for (i = 0; i < usbvision->num_frames; i++) { + frame = &usbvision->frame[i]; + if (frame->grabstate == frame_state_unused) { + /* Mark it as ready and enqueue frame */ + frame->grabstate = frame_state_ready; + frame->scanstate = scan_state_scanning; + /* Accumulated in usbvision_parse_data() */ + frame->scanlength = 0; + + /* set v4l2_format index */ + frame->v4l2_format = usbvision->palette; + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + list_add_tail(&frame->frame, &usbvision->inqueue); + spin_unlock_irqrestore(&usbvision->queue_lock, + lock_flags); + } + } + + /* Then try to steal a frame (like a VIDIOC_DQBUF would do) */ + if (list_empty(&(usbvision->outqueue))) { + if (noblock) + return -EAGAIN; + + ret = wait_event_interruptible + (usbvision->wait_frame, + !list_empty(&(usbvision->outqueue))); + if (ret) + return ret; + } + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + frame = list_entry(usbvision->outqueue.next, + struct usbvision_frame, frame); + list_del(usbvision->outqueue.next); + spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); + + /* An error returns an empty frame */ + if (frame->grabstate == frame_state_error) { + frame->bytes_read = 0; + return 0; + } + + PDEBUG(DBG_IO, "%s: frmx=%d, bytes_read=%ld, scanlength=%ld", + __func__, + frame->index, frame->bytes_read, frame->scanlength); + + /* copy bytes to user space; we allow for partials reads */ + if ((count + frame->bytes_read) > (unsigned long)frame->scanlength) + count = frame->scanlength - frame->bytes_read; + + if (copy_to_user(buf, frame->data + frame->bytes_read, count)) + return -EFAULT; + + frame->bytes_read += count; + PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld", + __func__, + (unsigned long)count, frame->bytes_read); + + /* For now, forget the frame if it has not been read in one shot. */ +/* if (frame->bytes_read >= frame->scanlength) {*/ /* All data has been read */ + frame->bytes_read = 0; + + /* Mark it as available to be used again. */ + frame->grabstate = frame_state_unused; +/* } */ + + return count; +} + +static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int res; + + if (mutex_lock_interruptible(&usbvision->v4l2_lock)) + return -ERESTARTSYS; + res = usbvision_read(file, buf, count, ppos); + mutex_unlock(&usbvision->v4l2_lock); + return res; +} + +static int usbvision_mmap(struct file *file, struct vm_area_struct *vma) +{ + unsigned long size = vma->vm_end - vma->vm_start, + start = vma->vm_start; + void *pos; + u32 i; + struct usb_usbvision *usbvision = video_drvdata(file); + + PDEBUG(DBG_MMAP, "mmap"); + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return -EFAULT; + + if (!(vma->vm_flags & VM_WRITE) || + size != PAGE_ALIGN(usbvision->max_frame_size)) { + return -EINVAL; + } + + for (i = 0; i < usbvision->num_frames; i++) { + if (((PAGE_ALIGN(usbvision->max_frame_size)*i) >> PAGE_SHIFT) == + vma->vm_pgoff) + break; + } + if (i == usbvision->num_frames) { + PDEBUG(DBG_MMAP, + "mmap: user supplied mapping address is out of range"); + return -EINVAL; + } + + /* VM_IO is eventually going to replace PageReserved altogether */ + vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */ + + pos = usbvision->frame[i].data; + while (size > 0) { + if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { + PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed"); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return 0; +} + +static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int res; + + if (mutex_lock_interruptible(&usbvision->v4l2_lock)) + return -ERESTARTSYS; + res = usbvision_mmap(file, vma); + mutex_unlock(&usbvision->v4l2_lock); + return res; +} + +/* + * Here comes the stuff for radio on usbvision based devices + * + */ +static int usbvision_radio_open(struct file *file) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int err_code = 0; + + PDEBUG(DBG_IO, "%s:", __func__); + + if (mutex_lock_interruptible(&usbvision->v4l2_lock)) + return -ERESTARTSYS; + if (usbvision->user) { + dev_err(&usbvision->rdev->dev, + "%s: Someone tried to open an already opened USBVision Radio!\n", + __func__); + err_code = -EBUSY; + } else { + if (power_on_at_open) { + usbvision_reset_power_off_timer(usbvision); + if (usbvision->power == 0) { + usbvision_power_on(usbvision); + usbvision_i2c_register(usbvision); + } + } + + /* Alternate interface 1 is is the biggest frame size */ + err_code = usbvision_set_alternate(usbvision); + if (err_code < 0) { + usbvision->last_error = err_code; + err_code = -EBUSY; + goto out; + } + + /* If so far no errors then we shall start the radio */ + usbvision->radio = 1; + call_all(usbvision, tuner, s_radio); + usbvision_set_audio(usbvision, USBVISION_AUDIO_RADIO); + usbvision->user++; + } + + if (err_code) { + if (power_on_at_open) { + usbvision_i2c_unregister(usbvision); + usbvision_power_off(usbvision); + usbvision->initialized = 0; + } + } +out: + mutex_unlock(&usbvision->v4l2_lock); + return err_code; +} + + +static int usbvision_radio_close(struct file *file) +{ + struct usb_usbvision *usbvision = video_drvdata(file); + int err_code = 0; + + PDEBUG(DBG_IO, ""); + + mutex_lock(&usbvision->v4l2_lock); + /* Set packet size to 0 */ + usbvision->iface_alt = 0; + err_code = usb_set_interface(usbvision->dev, usbvision->iface, + usbvision->iface_alt); + + usbvision_audio_off(usbvision); + usbvision->radio = 0; + usbvision->user--; + + if (power_on_at_open) { + usbvision_set_power_off_timer(usbvision); + usbvision->initialized = 0; + } + + if (usbvision->remove_pending) { + printk(KERN_INFO "%s: Final disconnect\n", __func__); + usbvision_release(usbvision); + } + + mutex_unlock(&usbvision->v4l2_lock); + PDEBUG(DBG_IO, "success"); + return err_code; +} + +/* Video registration stuff */ + +/* Video template */ +static const struct v4l2_file_operations usbvision_fops = { + .owner = THIS_MODULE, + .open = usbvision_v4l2_open, + .release = usbvision_v4l2_close, + .read = usbvision_v4l2_read, + .mmap = usbvision_v4l2_mmap, + .unlocked_ioctl = video_ioctl2, +/* .poll = video_poll, */ +}; + +static const struct v4l2_ioctl_ops usbvision_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_audio = vidioc_g_audio, + .vidioc_s_audio = vidioc_s_audio, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, +#endif +}; + +static struct video_device usbvision_video_template = { + .fops = &usbvision_fops, + .ioctl_ops = &usbvision_ioctl_ops, + .name = "usbvision-video", + .release = video_device_release, + .tvnorms = USBVISION_NORMS, + .current_norm = V4L2_STD_PAL +}; + + +/* Radio template */ +static const struct v4l2_file_operations usbvision_radio_fops = { + .owner = THIS_MODULE, + .open = usbvision_radio_open, + .release = usbvision_radio_close, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_audio = vidioc_g_audio, + .vidioc_s_audio = vidioc_s_audio, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, +}; + +static struct video_device usbvision_radio_template = { + .fops = &usbvision_radio_fops, + .name = "usbvision-radio", + .release = video_device_release, + .ioctl_ops = &usbvision_radio_ioctl_ops, + + .tvnorms = USBVISION_NORMS, + .current_norm = V4L2_STD_PAL +}; + + +static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision, + struct video_device *vdev_template, + char *name) +{ + struct usb_device *usb_dev = usbvision->dev; + struct video_device *vdev; + + if (usb_dev == NULL) { + dev_err(&usbvision->dev->dev, + "%s: usbvision->dev is not set\n", __func__); + return NULL; + } + + vdev = video_device_alloc(); + if (NULL == vdev) + return NULL; + *vdev = *vdev_template; + vdev->lock = &usbvision->v4l2_lock; + vdev->v4l2_dev = &usbvision->v4l2_dev; + snprintf(vdev->name, sizeof(vdev->name), "%s", name); + video_set_drvdata(vdev, usbvision); + return vdev; +} + +/* unregister video4linux devices */ +static void usbvision_unregister_video(struct usb_usbvision *usbvision) +{ + /* Radio Device: */ + if (usbvision->rdev) { + PDEBUG(DBG_PROBE, "unregister %s [v4l2]", + video_device_node_name(usbvision->rdev)); + if (video_is_registered(usbvision->rdev)) + video_unregister_device(usbvision->rdev); + else + video_device_release(usbvision->rdev); + usbvision->rdev = NULL; + } + + /* Video Device: */ + if (usbvision->vdev) { + PDEBUG(DBG_PROBE, "unregister %s [v4l2]", + video_device_node_name(usbvision->vdev)); + if (video_is_registered(usbvision->vdev)) + video_unregister_device(usbvision->vdev); + else + video_device_release(usbvision->vdev); + usbvision->vdev = NULL; + } +} + +/* register video4linux devices */ +static int __devinit usbvision_register_video(struct usb_usbvision *usbvision) +{ + /* Video Device: */ + usbvision->vdev = usbvision_vdev_init(usbvision, + &usbvision_video_template, + "USBVision Video"); + if (usbvision->vdev == NULL) + goto err_exit; + if (video_register_device(usbvision->vdev, VFL_TYPE_GRABBER, video_nr) < 0) + goto err_exit; + printk(KERN_INFO "USBVision[%d]: registered USBVision Video device %s [v4l2]\n", + usbvision->nr, video_device_node_name(usbvision->vdev)); + + /* Radio Device: */ + if (usbvision_device_data[usbvision->dev_model].radio) { + /* usbvision has radio */ + usbvision->rdev = usbvision_vdev_init(usbvision, + &usbvision_radio_template, + "USBVision Radio"); + if (usbvision->rdev == NULL) + goto err_exit; + if (video_register_device(usbvision->rdev, VFL_TYPE_RADIO, radio_nr) < 0) + goto err_exit; + printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device %s [v4l2]\n", + usbvision->nr, video_device_node_name(usbvision->rdev)); + } + /* all done */ + return 0; + + err_exit: + dev_err(&usbvision->dev->dev, + "USBVision[%d]: video_register_device() failed\n", + usbvision->nr); + usbvision_unregister_video(usbvision); + return -1; +} + +/* + * usbvision_alloc() + * + * This code allocates the struct usb_usbvision. + * It is filled with default values. + * + * Returns NULL on error, a pointer to usb_usbvision else. + * + */ +static struct usb_usbvision *usbvision_alloc(struct usb_device *dev, + struct usb_interface *intf) +{ + struct usb_usbvision *usbvision; + + usbvision = kzalloc(sizeof(struct usb_usbvision), GFP_KERNEL); + if (usbvision == NULL) + return NULL; + + usbvision->dev = dev; + if (v4l2_device_register(&intf->dev, &usbvision->v4l2_dev)) + goto err_free; + + mutex_init(&usbvision->v4l2_lock); + + /* prepare control urb for control messages during interrupts */ + usbvision->ctrl_urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); + if (usbvision->ctrl_urb == NULL) + goto err_unreg; + init_waitqueue_head(&usbvision->ctrl_urb_wq); + + usbvision_init_power_off_timer(usbvision); + + return usbvision; + +err_unreg: + v4l2_device_unregister(&usbvision->v4l2_dev); +err_free: + kfree(usbvision); + return NULL; +} + +/* + * usbvision_release() + * + * This code does final release of struct usb_usbvision. This happens + * after the device is disconnected -and- all clients closed their files. + * + */ +static void usbvision_release(struct usb_usbvision *usbvision) +{ + PDEBUG(DBG_PROBE, ""); + + usbvision_reset_power_off_timer(usbvision); + + usbvision->initialized = 0; + + usbvision_remove_sysfs(usbvision->vdev); + usbvision_unregister_video(usbvision); + + usb_free_urb(usbvision->ctrl_urb); + + v4l2_device_unregister(&usbvision->v4l2_dev); + kfree(usbvision); + + PDEBUG(DBG_PROBE, "success"); +} + + +/*********************** usb interface **********************************/ + +static void usbvision_configure_video(struct usb_usbvision *usbvision) +{ + int model; + + if (usbvision == NULL) + return; + + model = usbvision->dev_model; + usbvision->palette = usbvision_v4l2_format[2]; /* V4L2_PIX_FMT_RGB24; */ + + if (usbvision_device_data[usbvision->dev_model].vin_reg2_override) { + usbvision->vin_reg2_preset = + usbvision_device_data[usbvision->dev_model].vin_reg2; + } else { + usbvision->vin_reg2_preset = 0; + } + + usbvision->tvnorm_id = usbvision_device_data[model].video_norm; + + usbvision->video_inputs = usbvision_device_data[model].video_channels; + usbvision->ctl_input = 0; + + /* This should be here to make i2c clients to be able to register */ + /* first switch off audio */ + if (usbvision_device_data[model].audio_channels > 0) + usbvision_audio_off(usbvision); + if (!power_on_at_open) { + /* and then power up the noisy tuner */ + usbvision_power_on(usbvision); + usbvision_i2c_register(usbvision); + } +} + +/* + * usbvision_probe() + * + * This procedure queries device descriptor and accepts the interface + * if it looks like USBVISION video device + * + */ +static int __devinit usbvision_probe(struct usb_interface *intf, + const struct usb_device_id *devid) +{ + struct usb_device *dev = usb_get_dev(interface_to_usbdev(intf)); + struct usb_interface *uif; + __u8 ifnum = intf->altsetting->desc.bInterfaceNumber; + const struct usb_host_interface *interface; + struct usb_usbvision *usbvision = NULL; + const struct usb_endpoint_descriptor *endpoint; + int model, i; + + PDEBUG(DBG_PROBE, "VID=%#04x, PID=%#04x, ifnum=%u", + dev->descriptor.idVendor, + dev->descriptor.idProduct, ifnum); + + model = devid->driver_info; + if (model < 0 || model >= usbvision_device_data_size) { + PDEBUG(DBG_PROBE, "model out of bounds %d", model); + return -ENODEV; + } + printk(KERN_INFO "%s: %s found\n", __func__, + usbvision_device_data[model].model_string); + + if (usbvision_device_data[model].interface >= 0) + interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0]; + else + interface = &dev->actconfig->interface[ifnum]->altsetting[0]; + endpoint = &interface->endpoint[1].desc; + if (!usb_endpoint_xfer_isoc(endpoint)) { + dev_err(&intf->dev, "%s: interface %d. has non-ISO endpoint!\n", + __func__, ifnum); + dev_err(&intf->dev, "%s: Endpoint attributes %d", + __func__, endpoint->bmAttributes); + return -ENODEV; + } + if (usb_endpoint_dir_out(endpoint)) { + dev_err(&intf->dev, "%s: interface %d. has ISO OUT endpoint!\n", + __func__, ifnum); + return -ENODEV; + } + + usbvision = usbvision_alloc(dev, intf); + if (usbvision == NULL) { + dev_err(&intf->dev, "%s: couldn't allocate USBVision struct\n", __func__); + return -ENOMEM; + } + + if (dev->descriptor.bNumConfigurations > 1) + usbvision->bridge_type = BRIDGE_NT1004; + else if (model == DAZZLE_DVC_90_REV_1_SECAM) + usbvision->bridge_type = BRIDGE_NT1005; + else + usbvision->bridge_type = BRIDGE_NT1003; + PDEBUG(DBG_PROBE, "bridge_type %d", usbvision->bridge_type); + + /* compute alternate max packet sizes */ + uif = dev->actconfig->interface[0]; + + usbvision->num_alt = uif->num_altsetting; + PDEBUG(DBG_PROBE, "Alternate settings: %i", usbvision->num_alt); + usbvision->alt_max_pkt_size = kmalloc(32 * usbvision->num_alt, GFP_KERNEL); + if (usbvision->alt_max_pkt_size == NULL) { + dev_err(&intf->dev, "usbvision: out of memory!\n"); + return -ENOMEM; + } + + for (i = 0; i < usbvision->num_alt; i++) { + u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc. + wMaxPacketSize); + usbvision->alt_max_pkt_size[i] = + (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); + PDEBUG(DBG_PROBE, "Alternate setting %i, max size= %i", i, + usbvision->alt_max_pkt_size[i]); + } + + + usbvision->nr = usbvision_nr++; + + usbvision->have_tuner = usbvision_device_data[model].tuner; + if (usbvision->have_tuner) + usbvision->tuner_type = usbvision_device_data[model].tuner_type; + + usbvision->dev_model = model; + usbvision->remove_pending = 0; + usbvision->iface = ifnum; + usbvision->iface_alt = 0; + usbvision->video_endp = endpoint->bEndpointAddress; + usbvision->isoc_packet_size = 0; + usbvision->usb_bandwidth = 0; + usbvision->user = 0; + usbvision->streaming = stream_off; + usbvision_configure_video(usbvision); + usbvision_register_video(usbvision); + + usbvision_create_sysfs(usbvision->vdev); + + PDEBUG(DBG_PROBE, "success"); + return 0; +} + + +/* + * usbvision_disconnect() + * + * This procedure stops all driver activity, deallocates interface-private + * structure (pointed by 'ptr') and after that driver should be removable + * with no ill consequences. + * + */ +static void __devexit usbvision_disconnect(struct usb_interface *intf) +{ + struct usb_usbvision *usbvision = to_usbvision(usb_get_intfdata(intf)); + + PDEBUG(DBG_PROBE, ""); + + if (usbvision == NULL) { + pr_err("%s: usb_get_intfdata() failed\n", __func__); + return; + } + + mutex_lock(&usbvision->v4l2_lock); + + /* At this time we ask to cancel outstanding URBs */ + usbvision_stop_isoc(usbvision); + + v4l2_device_disconnect(&usbvision->v4l2_dev); + + if (usbvision->power) { + usbvision_i2c_unregister(usbvision); + usbvision_power_off(usbvision); + } + usbvision->remove_pending = 1; /* Now all ISO data will be ignored */ + + usb_put_dev(usbvision->dev); + usbvision->dev = NULL; /* USB device is no more */ + + mutex_unlock(&usbvision->v4l2_lock); + + if (usbvision->user) { + printk(KERN_INFO "%s: In use, disconnect pending\n", + __func__); + wake_up_interruptible(&usbvision->wait_frame); + wake_up_interruptible(&usbvision->wait_stream); + } else { + usbvision_release(usbvision); + } + + PDEBUG(DBG_PROBE, "success"); +} + +static struct usb_driver usbvision_driver = { + .name = "usbvision", + .id_table = usbvision_table, + .probe = usbvision_probe, + .disconnect = __devexit_p(usbvision_disconnect), +}; + +/* + * usbvision_init() + * + * This code is run to initialize the driver. + * + */ +static int __init usbvision_init(void) +{ + int err_code; + + PDEBUG(DBG_PROBE, ""); + + PDEBUG(DBG_IO, "IO debugging is enabled [video]"); + PDEBUG(DBG_PROBE, "PROBE debugging is enabled [video]"); + PDEBUG(DBG_MMAP, "MMAP debugging is enabled [video]"); + + /* disable planar mode support unless compression enabled */ + if (isoc_mode != ISOC_MODE_COMPRESS) { + /* FIXME : not the right way to set supported flag */ + usbvision_v4l2_format[6].supported = 0; /* V4L2_PIX_FMT_YVU420 */ + usbvision_v4l2_format[7].supported = 0; /* V4L2_PIX_FMT_YUV422P */ + } + + err_code = usb_register(&usbvision_driver); + + if (err_code == 0) { + printk(KERN_INFO DRIVER_DESC " : " USBVISION_VERSION_STRING "\n"); + PDEBUG(DBG_PROBE, "success"); + } + return err_code; +} + +static void __exit usbvision_exit(void) +{ + PDEBUG(DBG_PROBE, ""); + + usb_deregister(&usbvision_driver); + PDEBUG(DBG_PROBE, "success"); +} + +module_init(usbvision_init); +module_exit(usbvision_exit); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/usb/usbvision/usbvision.h b/drivers/media/usb/usbvision/usbvision.h new file mode 100644 index 000000000000..43cf61fe4943 --- /dev/null +++ b/drivers/media/usb/usbvision/usbvision.h @@ -0,0 +1,535 @@ +/* + * USBVISION.H + * usbvision header file + * + * Copyright (c) 1999-2005 Joerg Heckenbach + * Dwaine Garden + * + * + * Report problems to v4l MailingList: linux-media@vger.kernel.org + * + * This module is part of usbvision driver project. + * Updates to driver completed by Dwaine P. Garden + * v4l2 conversion by Thierry Merle + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#ifndef __LINUX_USBVISION_H +#define __LINUX_USBVISION_H + +#include +#include +#include +#include +#include +#include +#include + +#define USBVISION_DEBUG /* Turn on debug messages */ + +#define USBVISION_PWR_REG 0x00 + #define USBVISION_SSPND_EN (1 << 1) + #define USBVISION_RES2 (1 << 2) + #define USBVISION_PWR_VID (1 << 5) + #define USBVISION_E2_EN (1 << 7) +#define USBVISION_CONFIG_REG 0x01 +#define USBVISION_ADRS_REG 0x02 +#define USBVISION_ALTER_REG 0x03 +#define USBVISION_FORCE_ALTER_REG 0x04 +#define USBVISION_STATUS_REG 0x05 +#define USBVISION_IOPIN_REG 0x06 + #define USBVISION_IO_1 (1 << 0) + #define USBVISION_IO_2 (1 << 1) + #define USBVISION_AUDIO_IN 0 + #define USBVISION_AUDIO_TV 1 + #define USBVISION_AUDIO_RADIO 2 + #define USBVISION_AUDIO_MUTE 3 +#define USBVISION_SER_MODE 0x07 + #define USBVISION_CLK_OUT (1 << 0) + #define USBVISION_DAT_IO (1 << 1) + #define USBVISION_SENS_OUT (1 << 2) + #define USBVISION_SER_MODE_SOFT (0 << 4) + #define USBVISION_SER_MODE_SIO (1 << 4) +#define USBVISION_SER_ADRS 0x08 +#define USBVISION_SER_CONT 0x09 +#define USBVISION_SER_DAT1 0x0A +#define USBVISION_SER_DAT2 0x0B +#define USBVISION_SER_DAT3 0x0C +#define USBVISION_SER_DAT4 0x0D +#define USBVISION_EE_DATA 0x0E +#define USBVISION_EE_LSBAD 0x0F +#define USBVISION_EE_CONT 0x10 +#define USBVISION_DRM_CONT 0x12 + #define USBVISION_REF (1 << 0) + #define USBVISION_RES_UR (1 << 2) + #define USBVISION_RES_FDL (1 << 3) + #define USBVISION_RES_VDW (1 << 4) +#define USBVISION_DRM_PRM1 0x13 +#define USBVISION_DRM_PRM2 0x14 +#define USBVISION_DRM_PRM3 0x15 +#define USBVISION_DRM_PRM4 0x16 +#define USBVISION_DRM_PRM5 0x17 +#define USBVISION_DRM_PRM6 0x18 +#define USBVISION_DRM_PRM7 0x19 +#define USBVISION_DRM_PRM8 0x1A +#define USBVISION_VIN_REG1 0x1B + #define USBVISION_8_422_SYNC 0x01 + #define USBVISION_16_422_SYNC 0x02 + #define USBVISION_VSNC_POL (1 << 3) + #define USBVISION_HSNC_POL (1 << 4) + #define USBVISION_FID_POL (1 << 5) + #define USBVISION_HVALID_PO (1 << 6) + #define USBVISION_VCLK_POL (1 << 7) +#define USBVISION_VIN_REG2 0x1C + #define USBVISION_AUTO_FID (1 << 0) + #define USBVISION_NONE_INTER (1 << 1) + #define USBVISION_NOHVALID (1 << 2) + #define USBVISION_UV_ID (1 << 3) + #define USBVISION_FIX_2C (1 << 4) + #define USBVISION_SEND_FID (1 << 5) + #define USBVISION_KEEP_BLANK (1 << 7) +#define USBVISION_LXSIZE_I 0x1D +#define USBVISION_MXSIZE_I 0x1E +#define USBVISION_LYSIZE_I 0x1F +#define USBVISION_MYSIZE_I 0x20 +#define USBVISION_LX_OFFST 0x21 +#define USBVISION_MX_OFFST 0x22 +#define USBVISION_LY_OFFST 0x23 +#define USBVISION_MY_OFFST 0x24 +#define USBVISION_FRM_RATE 0x25 +#define USBVISION_LXSIZE_O 0x26 +#define USBVISION_MXSIZE_O 0x27 +#define USBVISION_LYSIZE_O 0x28 +#define USBVISION_MYSIZE_O 0x29 +#define USBVISION_FILT_CONT 0x2A +#define USBVISION_VO_MODE 0x2B +#define USBVISION_INTRA_CYC 0x2C +#define USBVISION_STRIP_SZ 0x2D +#define USBVISION_FORCE_INTRA 0x2E +#define USBVISION_FORCE_UP 0x2F +#define USBVISION_BUF_THR 0x30 +#define USBVISION_DVI_YUV 0x31 +#define USBVISION_AUDIO_CONT 0x32 +#define USBVISION_AUD_PK_LEN 0x33 +#define USBVISION_BLK_PK_LEN 0x34 +#define USBVISION_PCM_THR1 0x38 +#define USBVISION_PCM_THR2 0x39 +#define USBVISION_DIST_THR_L 0x3A +#define USBVISION_DIST_THR_H 0x3B +#define USBVISION_MAX_DIST_L 0x3C +#define USBVISION_MAX_DIST_H 0x3D +#define USBVISION_OP_CODE 0x33 + +#define MAX_BYTES_PER_PIXEL 4 + +#define MIN_FRAME_WIDTH 64 +#define MAX_USB_WIDTH 320 /* 384 */ +#define MAX_FRAME_WIDTH 320 /* 384 */ /* streching sometimes causes crashes*/ + +#define MIN_FRAME_HEIGHT 48 +#define MAX_USB_HEIGHT 240 /* 288 */ +#define MAX_FRAME_HEIGHT 240 /* 288 */ /* Streching sometimes causes crashes*/ + +#define MAX_FRAME_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL) +#define USBVISION_CLIPMASK_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) /* bytesize of clipmask */ + +#define USBVISION_URB_FRAMES 32 + +#define USBVISION_NUM_HEADERMARKER 20 +#define USBVISION_NUMFRAMES 3 /* Maximum number of frames an application can get */ +#define USBVISION_NUMSBUF 2 /* Dimensioning the USB S buffering */ + +#define USBVISION_POWEROFF_TIME (3 * HZ) /* 3 seconds */ + + +#define FRAMERATE_MIN 0 +#define FRAMERATE_MAX 31 + +enum { + ISOC_MODE_YUV422 = 0x03, + ISOC_MODE_YUV420 = 0x14, + ISOC_MODE_COMPRESS = 0x60, +}; + +/* This macro restricts an int variable to an inclusive range */ +#define RESTRICT_TO_RANGE(v, mi, ma) \ + { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); } + +/* + * We use macros to do YUV -> RGB conversion because this is + * very important for speed and totally unimportant for size. + * + * YUV -> RGB Conversion + * --------------------- + * + * B = 1.164*(Y-16) + 2.018*(V-128) + * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128) + * R = 1.164*(Y-16) + 1.596*(U-128) + * + * If you fancy integer arithmetics (as you should), hear this: + * + * 65536*B = 76284*(Y-16) + 132252*(V-128) + * 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128) + * 65536*R = 76284*(Y-16) + 104595*(U-128) + * + * Make sure the output values are within [0..255] range. + */ +#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x))) +#define YUV_TO_RGB_BY_THE_BOOK(my, mu, mv, mr, mg, mb) { \ + int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \ + mm_y = (my) - 16; \ + mm_u = (mu) - 128; \ + mm_v = (mv) - 128; \ + mm_yc = mm_y * 76284; \ + mm_b = (mm_yc + 132252 * mm_v) >> 16; \ + mm_g = (mm_yc - 53281 * mm_u - 25625 * mm_v) >> 16; \ + mm_r = (mm_yc + 104595 * mm_u) >> 16; \ + mb = LIMIT_RGB(mm_b); \ + mg = LIMIT_RGB(mm_g); \ + mr = LIMIT_RGB(mm_r); \ +} + +/* Debugging aid */ +#define USBVISION_SAY_AND_WAIT(what) { \ + wait_queue_head_t wq; \ + init_waitqueue_head(&wq); \ + printk(KERN_INFO "Say: %s\n", what); \ + interruptible_sleep_on_timeout(&wq, HZ * 3); \ +} + +/* + * This macro checks if usbvision is still operational. The 'usbvision' + * pointer must be valid, usbvision->dev must be valid, we are not + * removing the device and the device has not erred on us. + */ +#define USBVISION_IS_OPERATIONAL(udevice) (\ + (udevice != NULL) && \ + ((udevice)->dev != NULL) && \ + ((udevice)->last_error == 0) && \ + (!(udevice)->remove_pending)) + +#define I2C_USB_ADAP_MAX 16 + +#define USBVISION_NORMS (V4L2_STD_PAL | V4L2_STD_NTSC | V4L2_STD_SECAM | V4L2_STD_PAL_M) + +/* ----------------------------------------------------------------- */ +/* usbvision video structures */ +/* ----------------------------------------------------------------- */ +enum scan_state { + scan_state_scanning, /* Scanning for header */ + scan_state_lines /* Parsing lines */ +}; + +/* Completion states of the data parser */ +enum parse_state { + parse_state_continue, /* Just parse next item */ + parse_state_next_frame, /* Frame done, send it to V4L */ + parse_state_out, /* Not enough data for frame */ + parse_state_end_parse /* End parsing */ +}; + +enum frame_state { + frame_state_unused, /* Unused (no MCAPTURE) */ + frame_state_ready, /* Ready to start grabbing */ + frame_state_grabbing, /* In the process of being grabbed into */ + frame_state_done, /* Finished grabbing, but not been synced yet */ + frame_state_done_hold, /* Are syncing or reading */ + frame_state_error, /* Something bad happened while processing */ +}; + +/* stream states */ +enum stream_state { + stream_off, /* Driver streaming is completely OFF */ + stream_idle, /* Driver streaming is ready to be put ON by the application */ + stream_interrupt, /* Driver streaming must be interrupted */ + stream_on, /* Driver streaming is put ON by the application */ +}; + +enum isoc_state { + isoc_state_in_frame, /* Isoc packet is member of frame */ + isoc_state_no_frame, /* Isoc packet is not member of any frame */ +}; + +struct usb_device; + +struct usbvision_sbuf { + char *data; + struct urb *urb; +}; + +#define USBVISION_MAGIC_1 0x55 +#define USBVISION_MAGIC_2 0xAA +#define USBVISION_HEADER_LENGTH 0x0c +#define USBVISION_SAA7111_ADDR 0x48 +#define USBVISION_SAA7113_ADDR 0x4a +#define USBVISION_IIC_LRACK 0x20 +#define USBVISION_IIC_LRNACK 0x30 +#define USBVISION_FRAME_FORMAT_PARAM_INTRA (1<<7) + +struct usbvision_v4l2_format_st { + int supported; + int bytes_per_pixel; + int depth; + int format; + char *desc; +}; +#define USBVISION_SUPPORTED_PALETTES ARRAY_SIZE(usbvision_v4l2_format) + +struct usbvision_frame_header { + unsigned char magic_1; /* 0 magic */ + unsigned char magic_2; /* 1 magic */ + unsigned char header_length; /* 2 */ + unsigned char frame_num; /* 3 */ + unsigned char frame_phase; /* 4 */ + unsigned char frame_latency; /* 5 */ + unsigned char data_format; /* 6 */ + unsigned char format_param; /* 7 */ + unsigned char frame_width_lo; /* 8 */ + unsigned char frame_width_hi; /* 9 */ + unsigned char frame_height_lo; /* 10 */ + unsigned char frame_height_hi; /* 11 */ + __u16 frame_width; /* 8 - 9 after endian correction*/ + __u16 frame_height; /* 10 - 11 after endian correction*/ +}; + +struct usbvision_frame { + char *data; /* Frame buffer */ + struct usbvision_frame_header isoc_header; /* Header from stream */ + + int width; /* Width application is expecting */ + int height; /* Height */ + int index; /* Frame index */ + int frmwidth; /* Width the frame actually is */ + int frmheight; /* Height */ + + volatile int grabstate; /* State of grabbing */ + int scanstate; /* State of scanning */ + + struct list_head frame; + + int curline; /* Line of frame we're working on */ + + long scanlength; /* uncompressed, raw data length of frame */ + long bytes_read; /* amount of scanlength that has been read from data */ + struct usbvision_v4l2_format_st v4l2_format; /* format the user needs*/ + int v4l2_linesize; /* bytes for one videoline*/ + struct timeval timestamp; + int sequence; /* How many video frames we send to user */ +}; + +#define CODEC_SAA7113 7113 +#define CODEC_SAA7111 7111 +#define CODEC_WEBCAM 3000 +#define BRIDGE_NT1003 1003 +#define BRIDGE_NT1004 1004 +#define BRIDGE_NT1005 1005 + +struct usbvision_device_data_st { + __u64 video_norm; + const char *model_string; + int interface; /* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */ + __u16 codec; + unsigned video_channels:3; + unsigned audio_channels:2; + unsigned radio:1; + unsigned vbi:1; + unsigned tuner:1; + unsigned vin_reg1_override:1; /* Override default value with */ + unsigned vin_reg2_override:1; /* vin_reg1, vin_reg2, etc. */ + unsigned dvi_yuv_override:1; + __u8 vin_reg1; + __u8 vin_reg2; + __u8 dvi_yuv; + __u8 tuner_type; + __s16 x_offset; + __s16 y_offset; +}; + +/* Declared on usbvision-cards.c */ +extern struct usbvision_device_data_st usbvision_device_data[]; +extern struct usb_device_id usbvision_table[]; + +struct usb_usbvision { + struct v4l2_device v4l2_dev; + struct video_device *vdev; /* Video Device */ + struct video_device *rdev; /* Radio Device */ + + /* i2c Declaration Section*/ + struct i2c_adapter i2c_adap; + int registered_i2c; + + struct urb *ctrl_urb; + unsigned char ctrl_urb_buffer[8]; + int ctrl_urb_busy; + struct usb_ctrlrequest ctrl_urb_setup; + wait_queue_head_t ctrl_urb_wq; /* Processes waiting */ + + /* configuration part */ + int have_tuner; + int tuner_type; + int bridge_type; /* NT1003, NT1004, NT1005 */ + int radio; + int video_inputs; /* # of inputs */ + unsigned long freq; + int audio_mute; + int audio_channel; + int isoc_mode; /* format of video data for the usb isoc-transfer */ + unsigned int nr; /* Number of the device */ + + /* Device structure */ + struct usb_device *dev; + /* usb transfer */ + int num_alt; /* Number of alternative settings */ + unsigned int *alt_max_pkt_size; /* array of max_packet_size */ + unsigned char iface; /* Video interface number */ + unsigned char iface_alt; /* Alt settings */ + unsigned char vin_reg2_preset; + struct mutex v4l2_lock; + struct timer_list power_off_timer; + struct work_struct power_off_work; + int power; /* is the device powered on? */ + int user; /* user count for exclusive use */ + int initialized; /* Had we already sent init sequence? */ + int dev_model; /* What type of USBVISION device we got? */ + enum stream_state streaming; /* Are we streaming Isochronous? */ + int last_error; /* What calamity struck us? */ + int curwidth; /* width of the frame the device is currently set to*/ + int curheight; /* height of the frame the device is currently set to*/ + int stretch_width; /* stretch-factor for frame width (from usb to screen)*/ + int stretch_height; /* stretch-factor for frame height (from usb to screen)*/ + char *fbuf; /* Videodev buffer area for mmap*/ + int max_frame_size; /* Bytes in one video frame */ + int fbuf_size; /* Videodev buffer size */ + spinlock_t queue_lock; /* spinlock for protecting mods on inqueue and outqueue */ + struct list_head inqueue, outqueue; /* queued frame list and ready to dequeue frame list */ + wait_queue_head_t wait_frame; /* Processes waiting */ + wait_queue_head_t wait_stream; /* Processes waiting */ + struct usbvision_frame *cur_frame; /* pointer to current frame, set by usbvision_find_header */ + struct usbvision_frame frame[USBVISION_NUMFRAMES]; /* frame buffer */ + int num_frames; /* number of frames allocated */ + struct usbvision_sbuf sbuf[USBVISION_NUMSBUF]; /* S buffering */ + volatile int remove_pending; /* If set then about to exit */ + + /* Scratch space from the Isochronous Pipe.*/ + unsigned char *scratch; + int scratch_read_ptr; + int scratch_write_ptr; + int scratch_headermarker[USBVISION_NUM_HEADERMARKER]; + int scratch_headermarker_read_ptr; + int scratch_headermarker_write_ptr; + enum isoc_state isocstate; + struct usbvision_v4l2_format_st palette; + + struct v4l2_capability vcap; /* Video capabilities */ + unsigned int ctl_input; /* selected input */ + v4l2_std_id tvnorm_id; /* selected tv norm */ + unsigned char video_endp; /* 0x82 for USBVISION devices based */ + + /* Decompression stuff: */ + unsigned char *intra_frame_buffer; /* Buffer for reference frame */ + int block_pos; /* for test only */ + int request_intra; /* 0 = normal; 1 = intra frame is requested; */ + int last_isoc_frame_num; /* check for lost isoc frames */ + int isoc_packet_size; /* need to calculate used_bandwidth */ + int used_bandwidth; /* used bandwidth 0-100%, need to set compr_level */ + int compr_level; /* How strong (100) or weak (0) is compression */ + int last_compr_level; /* How strong (100) or weak (0) was compression */ + int usb_bandwidth; /* Mbit/s */ + + /* Statistics that can be overlayed on the screen */ + unsigned long isoc_urb_count; /* How many URBs we received so far */ + unsigned long urb_length; /* Length of last URB */ + unsigned long isoc_data_count; /* How many bytes we received */ + unsigned long header_count; /* How many frame headers we found */ + unsigned long scratch_ovf_count; /* How many times we overflowed scratch */ + unsigned long isoc_skip_count; /* How many empty ISO packets received */ + unsigned long isoc_err_count; /* How many bad ISO packets received */ + unsigned long isoc_packet_count; /* How many packets we totally got */ + unsigned long time_in_irq; /* How long do we need for interrupt */ + int isoc_measure_bandwidth_count; + int frame_num; /* How many video frames we send to user */ + int max_strip_len; /* How big is the biggest strip */ + int comprblock_pos; + int strip_len_errors; /* How many times was block_pos greater than strip_len */ + int strip_magic_errors; + int strip_line_number_errors; + int compr_block_types[4]; +}; + +static inline struct usb_usbvision *to_usbvision(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct usb_usbvision, v4l2_dev); +} + +#define call_all(usbvision, o, f, args...) \ + v4l2_device_call_all(&usbvision->v4l2_dev, 0, o, f, ##args) + +/* --------------------------------------------------------------- */ +/* defined in usbvision-i2c.c */ +/* i2c-algo-usb declaration */ +/* --------------------------------------------------------------- */ + +/* ----------------------------------------------------------------------- */ +/* usbvision specific I2C functions */ +/* ----------------------------------------------------------------------- */ +int usbvision_i2c_register(struct usb_usbvision *usbvision); +int usbvision_i2c_unregister(struct usb_usbvision *usbvision); + +/* defined in usbvision-core.c */ +int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg); +int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg, + unsigned char value); + +int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames); +void usbvision_frames_free(struct usb_usbvision *usbvision); +int usbvision_scratch_alloc(struct usb_usbvision *usbvision); +void usbvision_scratch_free(struct usb_usbvision *usbvision); +int usbvision_decompress_alloc(struct usb_usbvision *usbvision); +void usbvision_decompress_free(struct usb_usbvision *usbvision); + +int usbvision_setup(struct usb_usbvision *usbvision, int format); +int usbvision_init_isoc(struct usb_usbvision *usbvision); +int usbvision_restart_isoc(struct usb_usbvision *usbvision); +void usbvision_stop_isoc(struct usb_usbvision *usbvision); +int usbvision_set_alternate(struct usb_usbvision *dev); + +int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel); +int usbvision_audio_off(struct usb_usbvision *usbvision); + +int usbvision_begin_streaming(struct usb_usbvision *usbvision); +void usbvision_empty_framequeues(struct usb_usbvision *dev); +int usbvision_stream_interrupt(struct usb_usbvision *dev); + +int usbvision_muxsel(struct usb_usbvision *usbvision, int channel); +int usbvision_set_input(struct usb_usbvision *usbvision); +int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height); + +void usbvision_init_power_off_timer(struct usb_usbvision *usbvision); +void usbvision_set_power_off_timer(struct usb_usbvision *usbvision); +void usbvision_reset_power_off_timer(struct usb_usbvision *usbvision); +int usbvision_power_off(struct usb_usbvision *usbvision); +int usbvision_power_on(struct usb_usbvision *usbvision); + +#endif /* __LINUX_USBVISION_H */ + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ -- cgit v1.2.3