From 3f341acc1c65b800ced567174c683cda12dfb17d Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Thu, 1 Sep 2016 22:27:27 +0200 Subject: i40evf: Fix link state event handling Currently disabling the link state from PF via ip link set enp5s0f0 vf 0 state disable doesn't disable the CARRIER on the VF. This patch updates the carrier and starts/stops the tx queues based on the link state notification from PF. PF: enp5s0f0, VF: enp5s2 #modprobe i40e #echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs #ip link set enp5s2 up #ip -d link show enp5s2 175: enp5s2: mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 #ip link set enp5s0f0 vf 0 state disable #ip -d link show enp5s0f0 171: enp5s0f0: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 72 numrxqueues 72 portid 6805ca2e7268 vf 0 MAC 00:00:00:00:00:00, spoof checking on, link-state disable, trust off vf 1 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off #ip -d link show enp5s2 175: enp5s2: mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 16 numrxqueues 16 Signed-off-by: Sridhar Samudrala Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet/intel/i40evf/i40evf_main.c') diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index f751f7bc0d81..e0a8cd82255c 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -1037,6 +1037,7 @@ void i40evf_down(struct i40evf_adapter *adapter) netif_carrier_off(netdev); netif_tx_disable(netdev); + adapter->link_up = false; i40evf_napi_disable_all(adapter); i40evf_irq_disable(adapter); @@ -1731,6 +1732,7 @@ static void i40evf_reset_task(struct work_struct *work) set_bit(__I40E_DOWN, &adapter->vsi.state); netif_carrier_off(netdev); netif_tx_disable(netdev); + adapter->link_up = false; i40evf_napi_disable_all(adapter); i40evf_irq_disable(adapter); i40evf_free_traffic_irqs(adapter); @@ -1769,6 +1771,7 @@ continue_reset: if (netif_running(adapter->netdev)) { netif_carrier_off(netdev); netif_tx_stop_all_queues(netdev); + adapter->link_up = false; i40evf_napi_disable_all(adapter); } i40evf_irq_disable(adapter); @@ -2457,6 +2460,7 @@ static void i40evf_init_task(struct work_struct *work) goto err_sw_init; netif_carrier_off(netdev); + adapter->link_up = false; if (!adapter->netdev_registered) { err = register_netdev(netdev); -- cgit v1.2.3 From cb130a0b41d2a825fa48d7dfc964f08da9ccbb96 Mon Sep 17 00:00:00 2001 From: Bimmy Pujari Date: Tue, 6 Sep 2016 18:05:03 -0700 Subject: i40evf: remove unnecessary error checking against i40evf_up_complete Function i40evf_up_complete() always returns success. Changed this to a void type and removed the code that checks the return status and prints an error message. Change-ID: I8c400f174786b9c855f679e470f35af292fb50ad Signed-off-by: Bimmy Pujari Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet/intel/i40evf/i40evf_main.c') diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index e0a8cd82255c..99067757feb3 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -1007,7 +1007,7 @@ static void i40evf_configure(struct i40evf_adapter *adapter) * i40evf_up_complete - Finish the last steps of bringing up a connection * @adapter: board private structure **/ -static int i40evf_up_complete(struct i40evf_adapter *adapter) +static void i40evf_up_complete(struct i40evf_adapter *adapter) { adapter->state = __I40EVF_RUNNING; clear_bit(__I40E_DOWN, &adapter->vsi.state); @@ -1016,7 +1016,6 @@ static int i40evf_up_complete(struct i40evf_adapter *adapter) adapter->aq_required |= I40EVF_FLAG_AQ_ENABLE_QUEUES; mod_timer_pending(&adapter->watchdog_timer, jiffies + 1); - return 0; } /** @@ -1827,9 +1826,7 @@ continue_reset: i40evf_configure(adapter); - err = i40evf_up_complete(adapter); - if (err) - goto reset_err; + i40evf_up_complete(adapter); i40evf_irq_enable(adapter, true); } else { @@ -2059,9 +2056,7 @@ static int i40evf_open(struct net_device *netdev) i40evf_add_filter(adapter, adapter->hw.mac.addr); i40evf_configure(adapter); - err = i40evf_up_complete(adapter); - if (err) - goto err_req_irq; + i40evf_up_complete(adapter); i40evf_irq_enable(adapter, true); -- cgit v1.2.3 From 903e68323bb62cc8ca30c5a7a41d962f92c27b97 Mon Sep 17 00:00:00 2001 From: Lihong Yang Date: Tue, 6 Sep 2016 18:05:05 -0700 Subject: i40evf: remove unnecessary error checking against i40e_shutdown_adminq The i40e_shutdown_adminq function never returns failure. There is no need to check the non-0 return value. Clean up the unnecessary error checking and warning against it. Change-ID: Ibb616f09cfb93bd1a872ebf3241a15fb8354b31b Signed-off-by: Lihong Yang Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net/ethernet/intel/i40evf/i40evf_main.c') diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 99067757feb3..99833f3ea34e 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -1785,8 +1785,7 @@ continue_reset: i40evf_free_all_tx_resources(adapter); /* kill and reinit the admin queue */ - if (i40evf_shutdown_adminq(hw)) - dev_warn(&adapter->pdev->dev, "Failed to shut down adminq\n"); + i40evf_shutdown_adminq(hw); adapter->current_op = I40E_VIRTCHNL_OP_UNKNOWN; err = i40evf_init_adminq(hw); if (err) -- cgit v1.2.3 From fa90efa59dabbaac24f1ad2e6535e6daa2845257 Mon Sep 17 00:00:00 2001 From: Bimmy Pujari Date: Tue, 6 Sep 2016 18:05:12 -0700 Subject: i40e/i40evf: Changed version to 1.6.16 Signed-off-by: Bimmy Pujari Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/intel/i40evf/i40evf_main.c') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index e626761b8c94..b434d07d98cd 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -41,7 +41,7 @@ static const char i40e_driver_string[] = #define DRV_VERSION_MAJOR 1 #define DRV_VERSION_MINOR 6 -#define DRV_VERSION_BUILD 12 +#define DRV_VERSION_BUILD 16 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \ __stringify(DRV_VERSION_MINOR) "." \ __stringify(DRV_VERSION_BUILD) DRV_KERN diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 99833f3ea34e..064419e48f21 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -38,7 +38,7 @@ static const char i40evf_driver_string[] = #define DRV_VERSION_MAJOR 1 #define DRV_VERSION_MINOR 6 -#define DRV_VERSION_BUILD 12 +#define DRV_VERSION_BUILD 16 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \ __stringify(DRV_VERSION_MINOR) "." \ __stringify(DRV_VERSION_BUILD) \ -- cgit v1.2.3 From f19a973f46e85d4394cadb90fa7717f7ec98197a Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Mon, 12 Sep 2016 14:18:38 -0700 Subject: i40evf: enable adaptive interrupt throttling All of the code to support adaptive interrupt throttling is already in the interrupt handler, it just needs to be enabled. Fill out the data structures properly to make it happen. Single-flow traffic tests may show slightly lower throughput, but interrupts per second will drop by about 75%. Change-ID: I9cd7d42c025b906bf1bb85c6aeb6112684aa6471 Signed-off-by: Mitch Williams Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet/intel/i40evf/i40evf_main.c') diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 064419e48f21..302c9743ef44 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -370,6 +370,8 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx) { struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx]; struct i40e_ring *rx_ring = &adapter->rx_rings[r_idx]; + struct i40e_vsi *vsi = &adapter->vsi; + struct i40e_hw *hw = &adapter->hw; rx_ring->q_vector = q_vector; rx_ring->next = q_vector->rx.ring; @@ -377,7 +379,10 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx) q_vector->rx.ring = rx_ring; q_vector->rx.count++; q_vector->rx.latency_range = I40E_LOW_LATENCY; + q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting); + q_vector->ring_mask |= BIT(r_idx); q_vector->itr_countdown = ITR_COUNTDOWN_START; + wr32(hw, I40E_VFINT_ITRN1(I40E_RX_ITR, v_idx - 1), q_vector->rx.itr); } /** @@ -391,6 +396,8 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx) { struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx]; struct i40e_ring *tx_ring = &adapter->tx_rings[t_idx]; + struct i40e_vsi *vsi = &adapter->vsi; + struct i40e_hw *hw = &adapter->hw; tx_ring->q_vector = q_vector; tx_ring->next = q_vector->tx.ring; @@ -398,9 +405,10 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx) q_vector->tx.ring = tx_ring; q_vector->tx.count++; q_vector->tx.latency_range = I40E_LOW_LATENCY; + q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting); q_vector->itr_countdown = ITR_COUNTDOWN_START; q_vector->num_ringpairs++; - q_vector->ring_mask |= BIT(t_idx); + wr32(hw, I40E_VFINT_ITRN1(I40E_TX_ITR, v_idx - 1), q_vector->tx.itr); } /** @@ -2269,10 +2277,8 @@ int i40evf_process_config(struct i40evf_adapter *adapter) adapter->vsi.back = adapter; adapter->vsi.base_vector = 1; adapter->vsi.work_limit = I40E_DEFAULT_IRQ_WORK; - adapter->vsi.rx_itr_setting = (I40E_ITR_DYNAMIC | - ITR_REG_TO_USEC(I40E_ITR_RX_DEF)); - adapter->vsi.tx_itr_setting = (I40E_ITR_DYNAMIC | - ITR_REG_TO_USEC(I40E_ITR_TX_DEF)); + adapter->vsi.rx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF); + adapter->vsi.tx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF); vsi->netdev = adapter->netdev; vsi->qs_handle = adapter->vsi_res->qset_handle; if (vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF) { -- cgit v1.2.3 From 65e87c0398f542d5bd51cfd8a29b9dfd246b6a1c Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 12 Sep 2016 14:18:44 -0700 Subject: i40evf: support queue-specific settings for interrupt moderation In commit a75e8005d506f3 ("i40e: queue-specific settings for interrupt moderation") the i40e driver gained support for setting interrupt moderation values per queue. This patch adds support for this feature to the i40evf driver as well. In addition, a few changes are made to the i40e implementation to add function header documentation comments, as well. This behaves in a similar fashion to the implementation in i40e. Thus, requesting the moderation value when no queue is provided will report queue 0 value, while setting the value without a queue will set all queues at once. Change-ID: I1f310a57c8e6c84a8524c178d44d1b7a6d3a848e Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 72 ++++++- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 21 ++- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 26 ++- drivers/net/ethernet/intel/i40evf/i40e_txrx.h | 8 + drivers/net/ethernet/intel/i40evf/i40evf.h | 7 - drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c | 206 ++++++++++++++++----- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 10 +- 7 files changed, 280 insertions(+), 70 deletions(-) (limited to 'drivers/net/ethernet/intel/i40evf/i40evf_main.c') diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 5cad80f157fb..92bc8846f1ba 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -1970,11 +1970,22 @@ static int i40e_set_phys_id(struct net_device *netdev, * 125us (8000 interrupts per second) == ITR(62) */ +/** + * __i40e_get_coalesce - get per-queue coalesce settings + * @netdev: the netdev to check + * @ec: ethtool coalesce data structure + * @queue: which queue to pick + * + * Gets the per-queue settings for coalescence. Specifically Rx and Tx usecs + * are per queue. If queue is <0 then we default to queue 0 as the + * representative value. + **/ static int __i40e_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec, int queue) { struct i40e_netdev_priv *np = netdev_priv(netdev); + struct i40e_ring *rx_ring, *tx_ring; struct i40e_vsi *vsi = np->vsi; ec->tx_max_coalesced_frames_irq = vsi->work_limit; @@ -1989,14 +2000,18 @@ static int __i40e_get_coalesce(struct net_device *netdev, return -EINVAL; } - if (ITR_IS_DYNAMIC(vsi->rx_rings[queue]->rx_itr_setting)) + rx_ring = vsi->rx_rings[queue]; + tx_ring = vsi->tx_rings[queue]; + + if (ITR_IS_DYNAMIC(rx_ring->rx_itr_setting)) ec->use_adaptive_rx_coalesce = 1; - if (ITR_IS_DYNAMIC(vsi->tx_rings[queue]->tx_itr_setting)) + if (ITR_IS_DYNAMIC(tx_ring->tx_itr_setting)) ec->use_adaptive_tx_coalesce = 1; - ec->rx_coalesce_usecs = vsi->rx_rings[queue]->rx_itr_setting & ~I40E_ITR_DYNAMIC; - ec->tx_coalesce_usecs = vsi->tx_rings[queue]->tx_itr_setting & ~I40E_ITR_DYNAMIC; + ec->rx_coalesce_usecs = rx_ring->rx_itr_setting & ~I40E_ITR_DYNAMIC; + ec->tx_coalesce_usecs = tx_ring->tx_itr_setting & ~I40E_ITR_DYNAMIC; + /* we use the _usecs_high to store/set the interrupt rate limit * that the hardware supports, that almost but not quite @@ -2010,18 +2025,44 @@ static int __i40e_get_coalesce(struct net_device *netdev, return 0; } +/** + * i40e_get_coalesce - get a netdev's coalesce settings + * @netdev: the netdev to check + * @ec: ethtool coalesce data structure + * + * Gets the coalesce settings for a particular netdev. Note that if user has + * modified per-queue settings, this only guarantees to represent queue 0. See + * __i40e_get_coalesce for more details. + **/ static int i40e_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { return __i40e_get_coalesce(netdev, ec, -1); } +/** + * i40e_get_per_queue_coalesce - gets coalesce settings for particular queue + * @netdev: netdev structure + * @ec: ethtool's coalesce settings + * @queue: the particular queue to read + * + * Will read a specific queue's coalesce settings + **/ static int i40e_get_per_queue_coalesce(struct net_device *netdev, u32 queue, struct ethtool_coalesce *ec) { return __i40e_get_coalesce(netdev, ec, queue); } +/** + * i40e_set_itr_per_queue - set ITR values for specific queue + * @vsi: the VSI to set values for + * @ec: coalesce settings from ethtool + * @queue: the queue to modify + * + * Change the ITR settings for a specific queue. + **/ + static void i40e_set_itr_per_queue(struct i40e_vsi *vsi, struct ethtool_coalesce *ec, int queue) @@ -2060,6 +2101,14 @@ static void i40e_set_itr_per_queue(struct i40e_vsi *vsi, i40e_flush(hw); } +/** + * __i40e_set_coalesce - set coalesce settings for particular queue + * @netdev: the netdev to change + * @ec: ethtool coalesce settings + * @queue: the queue to change + * + * Sets the coalesce settings for a particular queue. + **/ static int __i40e_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec, int queue) @@ -2120,12 +2169,27 @@ static int __i40e_set_coalesce(struct net_device *netdev, return 0; } +/** + * i40e_set_coalesce - set coalesce settings for every queue on the netdev + * @netdev: the netdev to change + * @ec: ethtool coalesce settings + * + * This will set each queue to the same coalesce settings. + **/ static int i40e_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { return __i40e_set_coalesce(netdev, ec, -1); } +/** + * i40e_set_per_queue_coalesce - set specific queue's coalesce settings + * @netdev: the netdev to change + * @ec: ethtool's coalesce settings + * @queue: the queue to change + * + * Sets the specified queue's coalesce settings. + **/ static int i40e_set_per_queue_coalesce(struct net_device *netdev, u32 queue, struct ethtool_coalesce *ec) { diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 5237c491af89..6287bf63c43c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -1877,6 +1877,15 @@ static u32 i40e_buildreg_itr(const int type, const u16 itr) /* a small macro to shorten up some long lines */ #define INTREG I40E_PFINT_DYN_CTLN +static inline int get_rx_itr_enabled(struct i40e_vsi *vsi, int idx) +{ + return !!(vsi->rx_rings[idx]->rx_itr_setting); +} + +static inline int get_tx_itr_enabled(struct i40e_vsi *vsi, int idx) +{ + return !!(vsi->tx_rings[idx]->tx_itr_setting); +} /** * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt @@ -1892,6 +1901,7 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, u32 rxval, txval; int vector; int idx = q_vector->v_idx; + int rx_itr_setting, tx_itr_setting; vector = (q_vector->v_idx + vsi->base_vector); @@ -1900,18 +1910,21 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, */ rxval = txval = i40e_buildreg_itr(I40E_ITR_NONE, 0); + rx_itr_setting = get_rx_itr_enabled(vsi, idx); + tx_itr_setting = get_tx_itr_enabled(vsi, idx); + if (q_vector->itr_countdown > 0 || - (!ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting) && - !ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting))) { + (!ITR_IS_DYNAMIC(rx_itr_setting) && + !ITR_IS_DYNAMIC(tx_itr_setting))) { goto enable_int; } - if (ITR_IS_DYNAMIC(vsi->rx_rings[idx]->rx_itr_setting)) { + if (ITR_IS_DYNAMIC(tx_itr_setting)) { rx = i40e_set_new_dynamic_itr(&q_vector->rx); rxval = i40e_buildreg_itr(I40E_RX_ITR, q_vector->rx.itr); } - if (ITR_IS_DYNAMIC(vsi->tx_rings[idx]->tx_itr_setting)) { + if (ITR_IS_DYNAMIC(tx_itr_setting)) { tx = i40e_set_new_dynamic_itr(&q_vector->tx); txval = i40e_buildreg_itr(I40E_TX_ITR, q_vector->tx.itr); } diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index d4c6a767be94..75f2a2cdd738 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1311,6 +1311,19 @@ static u32 i40e_buildreg_itr(const int type, const u16 itr) /* a small macro to shorten up some long lines */ #define INTREG I40E_VFINT_DYN_CTLN1 +static inline int get_rx_itr_enabled(struct i40e_vsi *vsi, int idx) +{ + struct i40evf_adapter *adapter = vsi->back; + + return !!(adapter->rx_rings[idx].rx_itr_setting); +} + +static inline int get_tx_itr_enabled(struct i40e_vsi *vsi, int idx) +{ + struct i40evf_adapter *adapter = vsi->back; + + return !!(adapter->tx_rings[idx].tx_itr_setting); +} /** * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt @@ -1325,6 +1338,8 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, bool rx = false, tx = false; u32 rxval, txval; int vector; + int idx = q_vector->v_idx; + int rx_itr_setting, tx_itr_setting; vector = (q_vector->v_idx + vsi->base_vector); @@ -1333,18 +1348,21 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, */ rxval = txval = i40e_buildreg_itr(I40E_ITR_NONE, 0); + rx_itr_setting = get_rx_itr_enabled(vsi, idx); + tx_itr_setting = get_tx_itr_enabled(vsi, idx); + if (q_vector->itr_countdown > 0 || - (!ITR_IS_DYNAMIC(vsi->rx_itr_setting) && - !ITR_IS_DYNAMIC(vsi->tx_itr_setting))) { + (!ITR_IS_DYNAMIC(rx_itr_setting) && + !ITR_IS_DYNAMIC(tx_itr_setting))) { goto enable_int; } - if (ITR_IS_DYNAMIC(vsi->rx_itr_setting)) { + if (ITR_IS_DYNAMIC(rx_itr_setting)) { rx = i40e_set_new_dynamic_itr(&q_vector->rx); rxval = i40e_buildreg_itr(I40E_RX_ITR, q_vector->rx.itr); } - if (ITR_IS_DYNAMIC(vsi->tx_itr_setting)) { + if (ITR_IS_DYNAMIC(tx_itr_setting)) { tx = i40e_set_new_dynamic_itr(&q_vector->tx); txval = i40e_buildreg_itr(I40E_TX_ITR, q_vector->tx.itr); } diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h index 84e561cc0166..abcdecabbc56 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h @@ -287,6 +287,14 @@ struct i40e_ring { u8 dcb_tc; /* Traffic class of ring */ u8 __iomem *tail; + /* high bit set means dynamic, use accessors routines to read/write. + * hardware only supports 2us resolution for the ITR registers. + * these values always store the USER setting, and must be converted + * before programming to a register. + */ + u16 rx_itr_setting; + u16 tx_itr_setting; + u16 count; /* Number of descriptors */ u16 reg_idx; /* HW register index of the ring */ u16 rx_buf_len; diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h index dc00aaf94687..c5fd724313c7 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf.h +++ b/drivers/net/ethernet/intel/i40evf/i40evf.h @@ -59,13 +59,6 @@ struct i40e_vsi { unsigned long state; int base_vector; u16 work_limit; - /* high bit set means dynamic, use accessor routines to read/write. - * hardware only supports 2us resolution for the ITR registers. - * these values always store the USER setting, and must be converted - * before programming to a register. - */ - u16 rx_itr_setting; - u16 tx_itr_setting; u16 qs_handle; }; diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c index e17a15456266..a9940154eead 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c @@ -296,92 +296,206 @@ static int i40evf_set_ringparam(struct net_device *netdev, } /** - * i40evf_get_coalesce - Get interrupt coalescing settings - * @netdev: network interface device structure - * @ec: ethtool coalesce structure + * __i40evf_get_coalesce - get per-queue coalesce settings + * @netdev: the netdev to check + * @ec: ethtool coalesce data structure + * @queue: which queue to pick * - * Returns current coalescing settings. This is referred to elsewhere in the - * driver as Interrupt Throttle Rate, as this is how the hardware describes - * this functionality. + * Gets the per-queue settings for coalescence. Specifically Rx and Tx usecs + * are per queue. If queue is <0 then we default to queue 0 as the + * representative value. **/ -static int i40evf_get_coalesce(struct net_device *netdev, - struct ethtool_coalesce *ec) +static int __i40evf_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec, + int queue) { struct i40evf_adapter *adapter = netdev_priv(netdev); struct i40e_vsi *vsi = &adapter->vsi; + struct i40e_ring *rx_ring, *tx_ring; ec->tx_max_coalesced_frames = vsi->work_limit; ec->rx_max_coalesced_frames = vsi->work_limit; - if (ITR_IS_DYNAMIC(vsi->rx_itr_setting)) + /* Rx and Tx usecs per queue value. If user doesn't specify the + * queue, return queue 0's value to represent. + */ + if (queue < 0) + queue = 0; + else if (queue >= adapter->num_active_queues) + return -EINVAL; + + rx_ring = &adapter->rx_rings[queue]; + tx_ring = &adapter->tx_rings[queue]; + + if (ITR_IS_DYNAMIC(rx_ring->rx_itr_setting)) ec->use_adaptive_rx_coalesce = 1; - if (ITR_IS_DYNAMIC(vsi->tx_itr_setting)) + if (ITR_IS_DYNAMIC(tx_ring->tx_itr_setting)) ec->use_adaptive_tx_coalesce = 1; - ec->rx_coalesce_usecs = vsi->rx_itr_setting & ~I40E_ITR_DYNAMIC; - ec->tx_coalesce_usecs = vsi->tx_itr_setting & ~I40E_ITR_DYNAMIC; + ec->rx_coalesce_usecs = rx_ring->rx_itr_setting & ~I40E_ITR_DYNAMIC; + ec->tx_coalesce_usecs = tx_ring->tx_itr_setting & ~I40E_ITR_DYNAMIC; return 0; } /** - * i40evf_set_coalesce - Set interrupt coalescing settings + * i40evf_get_coalesce - Get interrupt coalescing settings * @netdev: network interface device structure * @ec: ethtool coalesce structure * - * Change current coalescing settings. + * Returns current coalescing settings. This is referred to elsewhere in the + * driver as Interrupt Throttle Rate, as this is how the hardware describes + * this functionality. Note that if per-queue settings have been modified this + * only represents the settings of queue 0. **/ -static int i40evf_set_coalesce(struct net_device *netdev, +static int i40evf_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { - struct i40evf_adapter *adapter = netdev_priv(netdev); - struct i40e_hw *hw = &adapter->hw; + return __i40evf_get_coalesce(netdev, ec, -1); +} + +/** + * i40evf_get_per_queue_coalesce - get coalesce values for specific queue + * @netdev: netdev to read + * @ec: coalesce settings from ethtool + * @queue: the queue to read + * + * Read specific queue's coalesce settings. + **/ +static int i40evf_get_per_queue_coalesce(struct net_device *netdev, + u32 queue, + struct ethtool_coalesce *ec) +{ + return __i40evf_get_coalesce(netdev, ec, queue); +} + +/** + * i40evf_set_itr_per_queue - set ITR values for specific queue + * @vsi: the VSI to set values for + * @ec: coalesce settings from ethtool + * @queue: the queue to modify + * + * Change the ITR settings for a specific queue. + **/ +static void i40evf_set_itr_per_queue(struct i40evf_adapter *adapter, + struct ethtool_coalesce *ec, + int queue) +{ struct i40e_vsi *vsi = &adapter->vsi; + struct i40e_hw *hw = &adapter->hw; struct i40e_q_vector *q_vector; + u16 vector; + + adapter->rx_rings[queue].rx_itr_setting = ec->rx_coalesce_usecs; + adapter->tx_rings[queue].tx_itr_setting = ec->tx_coalesce_usecs; + + if (ec->use_adaptive_rx_coalesce) + adapter->rx_rings[queue].rx_itr_setting |= I40E_ITR_DYNAMIC; + else + adapter->rx_rings[queue].rx_itr_setting &= ~I40E_ITR_DYNAMIC; + + if (ec->use_adaptive_tx_coalesce) + adapter->tx_rings[queue].tx_itr_setting |= I40E_ITR_DYNAMIC; + else + adapter->tx_rings[queue].tx_itr_setting &= ~I40E_ITR_DYNAMIC; + + q_vector = adapter->rx_rings[queue].q_vector; + q_vector->rx.itr = ITR_TO_REG(adapter->rx_rings[queue].rx_itr_setting); + vector = vsi->base_vector + q_vector->v_idx; + wr32(hw, I40E_VFINT_ITRN1(I40E_RX_ITR, vector - 1), q_vector->rx.itr); + + q_vector = adapter->tx_rings[queue].q_vector; + q_vector->tx.itr = ITR_TO_REG(adapter->tx_rings[queue].tx_itr_setting); + vector = vsi->base_vector + q_vector->v_idx; + wr32(hw, I40E_VFINT_ITRN1(I40E_TX_ITR, vector - 1), q_vector->tx.itr); + + i40e_flush(hw); +} + +/** + * __i40evf_set_coalesce - set coalesce settings for particular queue + * @netdev: the netdev to change + * @ec: ethtool coalesce settings + * @queue: the queue to change + * + * Sets the coalesce settings for a particular queue. + **/ +static int __i40evf_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec, + int queue) +{ + struct i40evf_adapter *adapter = netdev_priv(netdev); + struct i40e_vsi *vsi = &adapter->vsi; int i; if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq) vsi->work_limit = ec->tx_max_coalesced_frames_irq; - if ((ec->rx_coalesce_usecs >= (I40E_MIN_ITR << 1)) && - (ec->rx_coalesce_usecs <= (I40E_MAX_ITR << 1))) - vsi->rx_itr_setting = ec->rx_coalesce_usecs; - - else + if (ec->rx_coalesce_usecs == 0) { + if (ec->use_adaptive_rx_coalesce) + netif_info(adapter, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n"); + } else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) || + (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) { + netif_info(adapter, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n"); return -EINVAL; + } - if ((ec->tx_coalesce_usecs >= (I40E_MIN_ITR << 1)) && - (ec->tx_coalesce_usecs <= (I40E_MAX_ITR << 1))) - vsi->tx_itr_setting = ec->tx_coalesce_usecs; - else if (ec->use_adaptive_tx_coalesce) - vsi->tx_itr_setting = (I40E_ITR_DYNAMIC | - ITR_REG_TO_USEC(I40E_ITR_RX_DEF)); else + if (ec->tx_coalesce_usecs == 0) { + if (ec->use_adaptive_tx_coalesce) + netif_info(adapter, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n"); + } else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) || + (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) { + netif_info(adapter, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n"); return -EINVAL; + } - if (ec->use_adaptive_rx_coalesce) - vsi->rx_itr_setting |= I40E_ITR_DYNAMIC; - else - vsi->rx_itr_setting &= ~I40E_ITR_DYNAMIC; - - if (ec->use_adaptive_tx_coalesce) - vsi->tx_itr_setting |= I40E_ITR_DYNAMIC; - else - vsi->tx_itr_setting &= ~I40E_ITR_DYNAMIC; - - for (i = 0; i < adapter->num_msix_vectors - NONQ_VECS; i++) { - q_vector = &adapter->q_vectors[i]; - q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting); - wr32(hw, I40E_VFINT_ITRN1(0, i), q_vector->rx.itr); - q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting); - wr32(hw, I40E_VFINT_ITRN1(1, i), q_vector->tx.itr); - i40e_flush(hw); + /* Rx and Tx usecs has per queue value. If user doesn't specify the + * queue, apply to all queues. + */ + if (queue < 0) { + for (i = 0; i < adapter->num_active_queues; i++) + i40evf_set_itr_per_queue(adapter, ec, i); + } else if (queue < adapter->num_active_queues) { + i40evf_set_itr_per_queue(adapter, ec, queue); + } else { + netif_info(adapter, drv, netdev, "Invalid queue value, queue range is 0 - %d\n", + adapter->num_active_queues - 1); + return -EINVAL; } return 0; } +/** + * i40evf_set_coalesce - Set interrupt coalescing settings + * @netdev: network interface device structure + * @ec: ethtool coalesce structure + * + * Change current coalescing settings for every queue. + **/ +static int i40evf_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + return __i40evf_set_coalesce(netdev, ec, -1); +} + +/** + * i40evf_set_per_queue_coalesce - set specific queue's coalesce settings + * @netdev: the netdev to change + * @ec: ethtool's coalesce settings + * @queue: the queue to modify + * + * Modifies a specific queue's coalesce settings. + */ +static int i40evf_set_per_queue_coalesce(struct net_device *netdev, + u32 queue, + struct ethtool_coalesce *ec) +{ + return __i40evf_set_coalesce(netdev, ec, queue); +} + /** * i40evf_get_rxnfc - command to get RX flow classification rules * @netdev: network interface device structure @@ -533,6 +647,8 @@ static const struct ethtool_ops i40evf_ethtool_ops = { .set_msglevel = i40evf_set_msglevel, .get_coalesce = i40evf_get_coalesce, .set_coalesce = i40evf_set_coalesce, + .get_per_queue_coalesce = i40evf_get_per_queue_coalesce, + .set_per_queue_coalesce = i40evf_set_per_queue_coalesce, .get_rxnfc = i40evf_get_rxnfc, .get_rxfh_indir_size = i40evf_get_rxfh_indir_size, .get_rxfh = i40evf_get_rxfh, diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 302c9743ef44..14372810fc27 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -370,7 +370,6 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx) { struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx]; struct i40e_ring *rx_ring = &adapter->rx_rings[r_idx]; - struct i40e_vsi *vsi = &adapter->vsi; struct i40e_hw *hw = &adapter->hw; rx_ring->q_vector = q_vector; @@ -379,7 +378,7 @@ i40evf_map_vector_to_rxq(struct i40evf_adapter *adapter, int v_idx, int r_idx) q_vector->rx.ring = rx_ring; q_vector->rx.count++; q_vector->rx.latency_range = I40E_LOW_LATENCY; - q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting); + q_vector->rx.itr = ITR_TO_REG(rx_ring->rx_itr_setting); q_vector->ring_mask |= BIT(r_idx); q_vector->itr_countdown = ITR_COUNTDOWN_START; wr32(hw, I40E_VFINT_ITRN1(I40E_RX_ITR, v_idx - 1), q_vector->rx.itr); @@ -396,7 +395,6 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx) { struct i40e_q_vector *q_vector = &adapter->q_vectors[v_idx]; struct i40e_ring *tx_ring = &adapter->tx_rings[t_idx]; - struct i40e_vsi *vsi = &adapter->vsi; struct i40e_hw *hw = &adapter->hw; tx_ring->q_vector = q_vector; @@ -405,7 +403,7 @@ i40evf_map_vector_to_txq(struct i40evf_adapter *adapter, int v_idx, int t_idx) q_vector->tx.ring = tx_ring; q_vector->tx.count++; q_vector->tx.latency_range = I40E_LOW_LATENCY; - q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting); + q_vector->tx.itr = ITR_TO_REG(tx_ring->tx_itr_setting); q_vector->itr_countdown = ITR_COUNTDOWN_START; q_vector->num_ringpairs++; wr32(hw, I40E_VFINT_ITRN1(I40E_TX_ITR, v_idx - 1), q_vector->tx.itr); @@ -1162,6 +1160,7 @@ static int i40evf_alloc_queues(struct i40evf_adapter *adapter) tx_ring->netdev = adapter->netdev; tx_ring->dev = &adapter->pdev->dev; tx_ring->count = adapter->tx_desc_count; + tx_ring->tx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF); if (adapter->flags & I40E_FLAG_WB_ON_ITR_CAPABLE) tx_ring->flags |= I40E_TXR_FLAGS_WB_ON_ITR; @@ -1170,6 +1169,7 @@ static int i40evf_alloc_queues(struct i40evf_adapter *adapter) rx_ring->netdev = adapter->netdev; rx_ring->dev = &adapter->pdev->dev; rx_ring->count = adapter->rx_desc_count; + rx_ring->rx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF); } return 0; @@ -2277,8 +2277,6 @@ int i40evf_process_config(struct i40evf_adapter *adapter) adapter->vsi.back = adapter; adapter->vsi.base_vector = 1; adapter->vsi.work_limit = I40E_DEFAULT_IRQ_WORK; - adapter->vsi.rx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF); - adapter->vsi.tx_itr_setting = (I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF); vsi->netdev = adapter->netdev; vsi->qs_handle = adapter->vsi_res->qset_handle; if (vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_RSS_PF) { -- cgit v1.2.3