From f03369b9bfab8e23ac28ca7ab7e6631c374b7cbe Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Tue, 18 Aug 2020 16:40:01 -0700 Subject: igc: Fix wrong timestamp latency numbers The previous timestamping latency numbers were obtained by interpolating the i210 numbers with the i225 crystal clock value. That calculation was wrong. Use the correct values from real measurements. Fixes: 81b055205e8b ("igc: Add support for RX timestamping") Signed-off-by: Vinicius Costa Gomes Tested-by: Aaron Brown Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc.h | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) (limited to 'drivers/net/ethernet/intel/igc') diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h index 3070dfdb7eb4..2d566f3c827b 100644 --- a/drivers/net/ethernet/intel/igc/igc.h +++ b/drivers/net/ethernet/intel/igc/igc.h @@ -299,18 +299,14 @@ extern char igc_driver_name[]; #define IGC_RX_HDR_LEN IGC_RXBUFFER_256 /* Transmit and receive latency (for PTP timestamps) */ -/* FIXME: These values were estimated using the ones that i225 has as - * basis, they seem to provide good numbers with ptp4l/phc2sys, but we - * need to confirm them. - */ -#define IGC_I225_TX_LATENCY_10 9542 -#define IGC_I225_TX_LATENCY_100 1024 -#define IGC_I225_TX_LATENCY_1000 178 -#define IGC_I225_TX_LATENCY_2500 64 -#define IGC_I225_RX_LATENCY_10 20662 -#define IGC_I225_RX_LATENCY_100 2213 -#define IGC_I225_RX_LATENCY_1000 448 -#define IGC_I225_RX_LATENCY_2500 160 +#define IGC_I225_TX_LATENCY_10 240 +#define IGC_I225_TX_LATENCY_100 58 +#define IGC_I225_TX_LATENCY_1000 80 +#define IGC_I225_TX_LATENCY_2500 1325 +#define IGC_I225_RX_LATENCY_10 6450 +#define IGC_I225_RX_LATENCY_100 185 +#define IGC_I225_RX_LATENCY_1000 300 +#define IGC_I225_RX_LATENCY_2500 1485 /* RX and TX descriptor control thresholds. * PTHRESH - MAC will consider prefetch if it has fewer than this number of -- cgit v1.2.3 From 4406e977a4a1e997818b6d77c3218ef8d15b2abf Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Tue, 18 Aug 2020 16:40:02 -0700 Subject: igc: Fix not considering the TX delay for timestamps When timestamping a packet there's a delay between the start of the packet and the point where the hardware actually captures the timestamp. This difference needs to be considered if we want accurate timestamps. This was done on the RX side, but not on the TX side. Fixes: 2c344ae24501 ("igc: Add support for TX timestamping") Signed-off-by: Vinicius Costa Gomes Tested-by: Aaron Brown Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_ptp.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers/net/ethernet/intel/igc') diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c b/drivers/net/ethernet/intel/igc/igc_ptp.c index 36c999250fcc..6a9b5102aa55 100644 --- a/drivers/net/ethernet/intel/igc/igc_ptp.c +++ b/drivers/net/ethernet/intel/igc/igc_ptp.c @@ -364,6 +364,7 @@ static void igc_ptp_tx_hwtstamp(struct igc_adapter *adapter) struct sk_buff *skb = adapter->ptp_tx_skb; struct skb_shared_hwtstamps shhwtstamps; struct igc_hw *hw = &adapter->hw; + int adjust = 0; u64 regval; if (WARN_ON_ONCE(!skb)) @@ -373,6 +374,24 @@ static void igc_ptp_tx_hwtstamp(struct igc_adapter *adapter) regval |= (u64)rd32(IGC_TXSTMPH) << 32; igc_ptp_systim_to_hwtstamp(adapter, &shhwtstamps, regval); + switch (adapter->link_speed) { + case SPEED_10: + adjust = IGC_I225_TX_LATENCY_10; + break; + case SPEED_100: + adjust = IGC_I225_TX_LATENCY_100; + break; + case SPEED_1000: + adjust = IGC_I225_TX_LATENCY_1000; + break; + case SPEED_2500: + adjust = IGC_I225_TX_LATENCY_2500; + break; + } + + shhwtstamps.hwtstamp = + ktime_add_ns(shhwtstamps.hwtstamp, adjust); + /* Clear the lock early before calling skb_tstamp_tx so that * applications are not woken up before the lock bit is clear. We use * a copy of the skb pointer to ensure other threads can't change it -- cgit v1.2.3