From c505873eaece2b4aefd07d339dc7e1400e0235ac Mon Sep 17 00:00:00 2001 From: Zhao Qiang Date: Mon, 18 Dec 2017 10:26:43 +0800 Subject: net: phy: marvell: Limit 88m1101 autoneg errata to 88E1145 as well. 88E1145 also need this autoneg errata. Fixes: f2899788353c ("net: phy: marvell: Limit errata to 88m1101") Signed-off-by: Zhao Qiang Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index b5a8f750e433..26c9a11220ca 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -2073,7 +2073,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1145_config_init, - .config_aneg = &marvell_config_aneg, + .config_aneg = &m88e1101_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, -- cgit v1.2.3 From 6623c0fba10ef45b64ca213ad5dec926f37fa9a0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 15 Dec 2017 16:10:20 +0000 Subject: net: phy: marvell: avoid pause mode on SGMII-to-Copper for 88e151x Observed on the 88e1512 in SGMII-to-Copper mode, negotiating pause is unreliable. While the pause bits can be set in the advertisment register, they clear shortly after negotiation with a link partner commences irrespective of the cause of the negotiation. While these bits may be correctly conveyed to the link partner on the first negotiation, a subsequent negotiation (eg, due to negotiation restart by the link partner, or reconnection of the cable) will result in the link partner seeing these bits as zero, while the kernel believes that it has advertised pause modes. This leads to the local kernel evaluating (eg) symmetric pause mode, while the remote end evaluates that we have no pause mode capability. Since we can't guarantee the advertisment, disable pause mode support with this PHY when used in SGMII-to-Copper mode. The 88e1510 in RGMII-to-Copper mode appears to behave correctly. Reviewed-by: Andrew Lunn Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 26c9a11220ca..82104edca393 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -879,6 +879,8 @@ static int m88e1510_config_init(struct phy_device *phydev) /* SGMII-to-Copper mode initialization */ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + u32 pause; + /* Select page 18 */ err = marvell_set_page(phydev, 18); if (err < 0) @@ -902,6 +904,16 @@ static int m88e1510_config_init(struct phy_device *phydev) err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE); if (err < 0) return err; + + /* There appears to be a bug in the 88e1512 when used in + * SGMII to copper mode, where the AN advertisment register + * clears the pause bits each time a negotiation occurs. + * This means we can never be truely sure what was advertised, + * so disable Pause support. + */ + pause = SUPPORTED_Pause | SUPPORTED_Asym_Pause; + phydev->supported &= ~pause; + phydev->advertising &= ~pause; } return m88e1121_config_init(phydev); -- cgit v1.2.3 From ab14436065c8066c265540312742390d6d07ddd2 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 16 Dec 2017 00:52:39 +0300 Subject: net: phy: xgene: disable clk on error paths There are several error paths in xgene_mdio_probe(), where clk is left undisabled. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller --- drivers/net/phy/mdio-xgene.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'drivers/net/phy') diff --git a/drivers/net/phy/mdio-xgene.c b/drivers/net/phy/mdio-xgene.c index bfd3090fb055..07c6048200c6 100644 --- a/drivers/net/phy/mdio-xgene.c +++ b/drivers/net/phy/mdio-xgene.c @@ -194,8 +194,11 @@ static int xgene_mdio_reset(struct xgene_mdio_pdata *pdata) } ret = xgene_enet_ecc_init(pdata); - if (ret) + if (ret) { + if (pdata->dev->of_node) + clk_disable_unprepare(pdata->clk); return ret; + } xgene_gmac_reset(pdata); return 0; @@ -388,8 +391,10 @@ static int xgene_mdio_probe(struct platform_device *pdev) return ret; mdio_bus = mdiobus_alloc(); - if (!mdio_bus) - return -ENOMEM; + if (!mdio_bus) { + ret = -ENOMEM; + goto out_clk; + } mdio_bus->name = "APM X-Gene MDIO bus"; @@ -418,7 +423,7 @@ static int xgene_mdio_probe(struct platform_device *pdev) mdio_bus->phy_mask = ~0; ret = mdiobus_register(mdio_bus); if (ret) - goto out; + goto out_mdiobus; acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_HANDLE(dev), 1, acpi_register_phy, NULL, mdio_bus, NULL); @@ -426,16 +431,20 @@ static int xgene_mdio_probe(struct platform_device *pdev) } if (ret) - goto out; + goto out_mdiobus; pdata->mdio_bus = mdio_bus; xgene_mdio_status = true; return 0; -out: +out_mdiobus: mdiobus_free(mdio_bus); +out_clk: + if (dev->of_node) + clk_disable_unprepare(pdata->clk); + return ret; } -- cgit v1.2.3