From 1d3cfc2835c1754d19a743dc346a9e58cf0c07c0 Mon Sep 17 00:00:00 2001 From: Kelvin Cao Date: Thu, 23 Dec 2021 17:23:33 -0800 Subject: ntb_hw_switchtec: Remove code for disabling ID protection ID protection is a firmware setting for NT window access control. With it enabled, only the posted requests with requester IDs in the requester ID table will be allowed to access the NT windows. Otherwise all posted requests are allowed. Normally user will configure it statically via the Switchtec config file, and it will take effect when the firmware boots up. The driver can also toggle the ID protection setting dynamically, which will overwrite the static setting in the Switchtec config file as a side effect. Currently, the driver disables the ID protection. However, it's not necessary to disable the ID protection at the driver level as the driver has already configured the proper requester IDs in the requester ID table to allow the corresponding posted requests to hit the NT windows. Remove the code that disables the ID protection to make the static setting prevail. Note: ID protection is not applicable to non-posted requests. Signed-off-by: Kelvin Cao Signed-off-by: Jon Mason --- drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/ntb') diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c index ba6a9670c681..e79a355bafbf 100644 --- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c +++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c @@ -967,9 +967,6 @@ static int config_req_id_table(struct switchtec_ntb *sndev, if (rc) return rc; - iowrite32(NTB_PART_CTRL_ID_PROT_DIS, - &mmio_ctrl->partition_ctrl); - for (i = 0; i < count; i++) { iowrite32(req_ids[i] << 16 | NTB_CTRL_REQ_ID_EN, &mmio_ctrl->req_id_table[i]); -- cgit v1.2.3