From bee08559701fb98b43d7061717e7c3131230aa69 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Mon, 19 Jul 2021 13:19:32 +0100 Subject: reset: renesas: Add RZ/G2L usbphy control driver Add support for RZ/G2L USBPHY Control driver. It mainly controls reset and power down of the USB/PHY. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210719121938.6532-5-biju.das.jz@bp.renesas.com Signed-off-by: Philipp Zabel --- drivers/reset/Kconfig | 7 ++ drivers/reset/Makefile | 1 + drivers/reset/reset-rzg2l-usbphy-ctrl.c | 175 ++++++++++++++++++++++++++++++++ 3 files changed, 183 insertions(+) create mode 100644 drivers/reset/reset-rzg2l-usbphy-ctrl.c (limited to 'drivers/reset') diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 328f70f633eb..ed65ea66987b 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -181,6 +181,13 @@ config RESET_RASPBERRYPI interfacing with RPi4's co-processor and model these firmware initialization routines as reset lines. +config RESET_RZG2L_USBPHY_CTRL + tristate "Renesas RZ/G2L USBPHY control driver" + depends on ARCH_R9A07G044 || COMPILE_TEST + help + Support for USBPHY Control found on RZ/G2L family. It mainly + controls reset and power down of the USB/PHY. + config RESET_SCMI tristate "Reset driver controlled via ARM SCMI interface" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index ea8b8d9ca565..21d46d8869ff 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o +obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o obj-$(CONFIG_RESET_SCMI) += reset-scmi.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c new file mode 100644 index 000000000000..e0704fd2b533 --- /dev/null +++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas RZ/G2L USBPHY control driver + * + * Copyright (C) 2021 Renesas Electronics Corporation + */ + +#include +#include +#include +#include +#include +#include +#include + +#define RESET 0x000 + +#define RESET_SEL_PLLRESET BIT(12) +#define RESET_PLLRESET BIT(8) + +#define RESET_SEL_P2RESET BIT(5) +#define RESET_SEL_P1RESET BIT(4) +#define RESET_PHYRST_2 BIT(1) +#define RESET_PHYRST_1 BIT(0) + +#define PHY_RESET_PORT2 (RESET_SEL_P2RESET | RESET_PHYRST_2) +#define PHY_RESET_PORT1 (RESET_SEL_P1RESET | RESET_PHYRST_1) + +#define NUM_PORTS 2 + +struct rzg2l_usbphy_ctrl_priv { + struct reset_controller_dev rcdev; + struct reset_control *rstc; + void __iomem *base; + + spinlock_t lock; +}; + +#define rcdev_to_priv(x) container_of(x, struct rzg2l_usbphy_ctrl_priv, rcdev) + +static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); + u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2; + void __iomem *base = priv->base; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&priv->lock, flags); + val = readl(base + RESET); + val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; + if (port_mask == (val & port_mask)) + val |= RESET_PLLRESET; + writel(val, base + RESET); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); + void __iomem *base = priv->base; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&priv->lock, flags); + val = readl(base + RESET); + + val |= RESET_SEL_PLLRESET; + val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1)); + writel(val, base + RESET); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); + u32 port_mask; + + port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; + + return !!(readl(priv->base + RESET) & port_mask); +} + +static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = { + { .compatible = "renesas,rzg2l-usbphy-ctrl" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table); + +static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = { + .assert = rzg2l_usbphy_ctrl_assert, + .deassert = rzg2l_usbphy_ctrl_deassert, + .status = rzg2l_usbphy_ctrl_status, +}; + +static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rzg2l_usbphy_ctrl_priv *priv; + unsigned long flags; + int error; + u32 val; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(priv->rstc)) + return dev_err_probe(dev, PTR_ERR(priv->rstc), + "failed to get reset\n"); + + reset_control_deassert(priv->rstc); + + priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops; + priv->rcdev.of_reset_n_cells = 1; + priv->rcdev.nr_resets = NUM_PORTS; + priv->rcdev.of_node = dev->of_node; + priv->rcdev.dev = dev; + + error = devm_reset_controller_register(dev, &priv->rcdev); + if (error) + return error; + + spin_lock_init(&priv->lock); + dev_set_drvdata(dev, priv); + + pm_runtime_enable(&pdev->dev); + pm_runtime_resume_and_get(&pdev->dev); + + /* put pll and phy into reset state */ + spin_lock_irqsave(&priv->lock, flags); + val = readl(priv->base + RESET); + val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 | PHY_RESET_PORT1; + writel(val, priv->base + RESET); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int rzg2l_usbphy_ctrl_remove(struct platform_device *pdev) +{ + struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev); + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + reset_control_assert(priv->rstc); + + return 0; +} + +static struct platform_driver rzg2l_usbphy_ctrl_driver = { + .driver = { + .name = "rzg2l_usbphy_ctrl", + .of_match_table = rzg2l_usbphy_ctrl_match_table, + }, + .probe = rzg2l_usbphy_ctrl_probe, + .remove = rzg2l_usbphy_ctrl_remove, +}; +module_platform_driver(rzg2l_usbphy_ctrl_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control"); +MODULE_AUTHOR("biju.das.jz@bp.renesas.com>"); -- cgit v1.2.3