From e44fd1cfded0e42c681ad5419b1ceea600ead29d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 22 Sep 2009 20:44:24 +0200 Subject: Staging: rt2860: add RT3090 chipset support Add support for RT3090 chipset (based on 2009_0612_RT3090_Linux_STA_V2.1.0.0_DPO). Tested with RT2860. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/chips/rt3090.c | 123 ++++++++++++++++++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 drivers/staging/rt2860/chips/rt3090.c (limited to 'drivers/staging/rt2860/chips/rt3090.c') diff --git a/drivers/staging/rt2860/chips/rt3090.c b/drivers/staging/rt2860/chips/rt3090.c new file mode 100644 index 000000000000..35c549dc4ce1 --- /dev/null +++ b/drivers/staging/rt2860/chips/rt3090.c @@ -0,0 +1,123 @@ +/* + ************************************************************************* + * Ralink Tech Inc. + * 5F., No.36, Taiyuan St., Jhubei City, + * Hsinchu County 302, + * Taiwan, R.O.C. + * + * (c) Copyright 2002-2007, Ralink Technology, Inc. + * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + ************************************************************************* + + Module Name: + rt3090.c + + Abstract: + Specific funcitons and variables for RT3070 + + Revision History: + Who When What + -------- ---------- ---------------------------------------------- +*/ + +#ifdef RT3090 + +#include "../rt_config.h" + + +#ifndef RTMP_RF_RW_SUPPORT +#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip" +#endif // RTMP_RF_RW_SUPPORT // + + +VOID NICInitRT3090RFRegisters(IN PRTMP_ADAPTER pAd) +{ + INT i; + // Driver must read EEPROM to get RfIcType before initial RF registers + // Initialize RF register to default value + if (IS_RT3090(pAd)) + { + // Init RF calibration + // Driver should toggle RF R30 bit7 before init RF registers + UINT32 RfReg = 0, data; + + RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); + RfReg |= 0x80; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + RTMPusecDelay(1000); + RfReg &= 0x7F; + RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); + + // init R24, R31 + RT30xxWriteRFRegister(pAd, RF_R24, 0x0F); + RT30xxWriteRFRegister(pAd, RF_R31, 0x0F); + + // RT309x version E has fixed this issue + if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211)) + { + // patch tx EVM issue temporarily + RTMP_IO_READ32(pAd, LDO_CFG0, &data); + data = ((data & 0xE0FFFFFF) | 0x0D000000); + RTMP_IO_WRITE32(pAd, LDO_CFG0, data); + } + else + { + RTMP_IO_READ32(pAd, LDO_CFG0, &data); + data = ((data & 0xE0FFFFFF) | 0x01000000); + RTMP_IO_WRITE32(pAd, LDO_CFG0, data); + } + + // patch LNA_PE_G1 failed issue + RTMP_IO_READ32(pAd, GPIO_SWITCH, &data); + data &= ~(0x20); + RTMP_IO_WRITE32(pAd, GPIO_SWITCH, data); + + // Initialize RF register to default value + for (i = 0; i < NUM_RF_REG_PARMS; i++) + { + RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); + } + + // Driver should set RF R6 bit6 on before calibration + RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg); + RfReg |= 0x40; + RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg); + + //For RF filter Calibration + RTMPFilterCalibration(pAd); + + // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() + if ((pAd->MACVersion & 0xffff) < 0x0211) + RT30xxWriteRFRegister(pAd, RF_R27, 0x3); + + // set led open drain enable + RTMP_IO_READ32(pAd, OPT_14, &data); + data |= 0x01; + RTMP_IO_WRITE32(pAd, OPT_14, data); + + // set default antenna as main + if (pAd->RfIcType == RFIC_3020) + AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); + + // add by johnli, RF power sequence setup, load RF normal operation-mode setup + RT30xxLoadRFNormalModeSetup(pAd); + } + +} + +#endif // RT3090 // -- cgit v1.2.3