From 821c9a396f7b833cd8b86cc6683a947a113c16d7 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 15 Oct 2008 11:44:40 +0000 Subject: [WATCHDOG] ib700wdt - add timeout parameter Add the timeout module parameter to ib700wdt.c Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ib700wdt.c | 49 ++++++++++++++++++--------------------------- 1 file changed, 19 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 8782ec1f5aa0..d9850dbf63ef 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -91,32 +91,16 @@ static char expect_close; * */ -static int wd_times[] = { - 30, /* 0x0 */ - 28, /* 0x1 */ - 26, /* 0x2 */ - 24, /* 0x3 */ - 22, /* 0x4 */ - 20, /* 0x5 */ - 18, /* 0x6 */ - 16, /* 0x7 */ - 14, /* 0x8 */ - 12, /* 0x9 */ - 10, /* 0xA */ - 8, /* 0xB */ - 6, /* 0xC */ - 4, /* 0xD */ - 2, /* 0xE */ - 0, /* 0xF */ -}; - #define WDT_STOP 0x441 #define WDT_START 0x443 /* Default timeout */ -#define WD_TIMO 0 /* 30 seconds +/- 20%, from table */ - -static int wd_margin = WD_TIMO; +#define WATCHDOG_TIMEOUT 30 /* 30 seconds +/- 20% */ +static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 0<= timeout <=30, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); @@ -131,6 +115,8 @@ MODULE_PARM_DESC(nowayout, static void ibwdt_ping(void) { + int wd_margin = 15 - ((timeout + 1) / 2); + spin_lock(&ibwdt_lock); /* Write a watchdog value */ @@ -148,15 +134,10 @@ static void ibwdt_disable(void) static int ibwdt_set_heartbeat(int t) { - int i; - - if ((t < 0) || (t > 30)) + if (t < 0 || t > 30) return -EINVAL; - for (i = 0x0F; i > -1; i--) - if (wd_times[i] >= t) - break; - wd_margin = i; + timeout = t; return 0; } @@ -240,7 +221,7 @@ static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) /* Fall */ case WDIOC_GETTIMEOUT: - return put_user(wd_times[wd_margin], p); + return put_user(timeout, p); default: return -ENOTTY; @@ -317,6 +298,14 @@ static int __devinit ibwdt_probe(struct platform_device *dev) goto out_nostartreg; } + /* Check that the heartbeat value is within it's range ; + * if not reset to the default */ + if (ibwdt_set_heartbeat(timeout)) { + ibwdt_set_heartbeat(WATCHDOG_TIMEOUT); + printk(KERN_INFO PFX + "timeout value must be 0<=x<=30, using %d\n", timeout); + } + res = misc_register(&ibwdt_miscdev); if (res) { printk(KERN_ERR PFX "failed to register misc device\n"); -- cgit v1.2.3 From a61524d7c8107c1e1f7a5110a003ae79696a1800 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 22 Oct 2008 08:59:25 +0000 Subject: [WATCHDOG] Add SMSC SCH311x Watchdog Timer. Add a watchdog driver for the hardware watchdog timer on the SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset. Tested-by: Marco Chiappero Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 12 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sch311x_wdt.c | 578 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 591 insertions(+) create mode 100644 drivers/watchdog/sch311x_wdt.c (limited to 'drivers') diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 1a22fe782a27..fc36d93a897f 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -551,6 +551,18 @@ config CPU5_WDT To compile this driver as a module, choose M here: the module will be called cpu5wdt. +config SMSC_SCH311X_WDT + tristate "SMSC SCH311X Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the hardware watchdog timer on the + SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset + (LPC IO with 8042 KBC, Reset Generation, HWM and multiple + serial ports). + + To compile this driver as a module, choose M here: the + module will be called sch311x_wdt. + config SMSC37B787_WDT tristate "Winbond SMsC37B787 Watchdog Timer" depends on X86 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index e352bbb7630b..0cd47867b194 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -83,6 +83,7 @@ obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o obj-$(CONFIG_SBC8360_WDT) += sbc8360.o obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o +obj-$(CONFIG_SMSC_SCH311X_WDT) += sch311x_wdt.o obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c new file mode 100644 index 000000000000..569eb295a7a8 --- /dev/null +++ b/drivers/watchdog/sch311x_wdt.c @@ -0,0 +1,578 @@ +/* + * sch311x_wdt.c - Driver for the SCH311x Super-I/O chips + * integrated watchdog. + * + * (c) Copyright 2008 Wim Van Sebroeck . + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +/* Includes */ +#include /* For module specific items */ +#include /* For new moduleparam's */ +#include /* For standard types (like size_t) */ +#include /* For the -ENODEV/... values */ +#include /* For printk/... */ +#include /* For MODULE_ALIAS_MISCDEV + (WATCHDOG_MINOR) */ +#include /* For the watchdog specific items */ +#include /* For __init/__exit/... */ +#include /* For file operations */ +#include /* For platform_driver framework */ +#include /* For io-port access */ +#include /* For spin_lock/spin_unlock/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ + +/* Module and version information */ +#define DRV_NAME "sch311x_wdt" +#define PFX DRV_NAME ": " + +/* Runtime registers */ +#define RESGEN 0x1d +#define GP60 0x47 +#define WDT_TIME_OUT 0x65 +#define WDT_VAL 0x66 +#define WDT_CFG 0x67 +#define WDT_CTRL 0x68 + +/* internal variables */ +static unsigned long sch311x_wdt_is_open; +static char sch311x_wdt_expect_close; +static struct platform_device *sch311x_wdt_pdev; + +static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e, 0x00 }; + +static struct { /* The devices private data */ + /* the Runtime Register base address */ + unsigned short runtime_reg; + /* The card's boot status */ + int boot_status; + /* the lock for io operations */ + spinlock_t io_lock; +} sch311x_wdt_data; + +/* Module load parameters */ +static unsigned short force_id; +module_param(force_id, ushort, 0); +MODULE_PARM_DESC(force_id, "Override the detected device ID"); + +static unsigned short therm_trip; +module_param(therm_trip, ushort, 0); +MODULE_PARM_DESC(therm_trip, "Should a ThermTrip trigger the reset generator"); + +#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ +static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=15300, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * Super-IO functions + */ + +static inline void sch311x_sio_enter(int sio_config_port) +{ + outb(0x55, sio_config_port); +} + +static inline void sch311x_sio_exit(int sio_config_port) +{ + outb(0xaa, sio_config_port); +} + +static inline int sch311x_sio_inb(int sio_config_port, int reg) +{ + outb(reg, sio_config_port); + return inb(sio_config_port + 1); +} + +static inline void sch311x_sio_outb(int sio_config_port, int reg, int val) +{ + outb(reg, sio_config_port); + outb(val, sio_config_port + 1); +} + +/* + * Watchdog Operations + */ + +static void sch311x_wdt_set_timeout(int t) +{ + unsigned char timeout_unit = 0x80; + + /* When new timeout is bigger then 255 seconds, we will use minutes */ + if (t > 255) { + timeout_unit = 0; + t /= 60; + } + + /* -- Watchdog Timeout -- + * Bit 0-6 (Reserved) + * Bit 7 WDT Time-out Value Units Select + * (0 = Minutes, 1 = Seconds) + */ + outb(timeout_unit, sch311x_wdt_data.runtime_reg + WDT_TIME_OUT); + + /* -- Watchdog Timer Time-out Value -- + * Bit 0-7 Binary coded units (0=Disabled, 1..255) + */ + outb(t, sch311x_wdt_data.runtime_reg + WDT_VAL); +} + +static void sch311x_wdt_start(void) +{ + spin_lock(&sch311x_wdt_data.io_lock); + + /* set watchdog's timeout */ + sch311x_wdt_set_timeout(timeout); + /* enable the watchdog */ + /* -- General Purpose I/O Bit 6.0 -- + * Bit 0, In/Out: 0 = Output, 1 = Input + * Bit 1, Polarity: 0 = No Invert, 1 = Invert + * Bit 2-3, Function select: 00 = GPI/O, 01 = LED1, 11 = WDT, + * 10 = Either Edge Triggered Intr.4 + * Bit 4-6 (Reserved) + * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + */ + outb(0x0e, sch311x_wdt_data.runtime_reg + GP60); + + spin_unlock(&sch311x_wdt_data.io_lock); + +} + +static void sch311x_wdt_stop(void) +{ + spin_lock(&sch311x_wdt_data.io_lock); + + /* stop the watchdog */ + outb(0x01, sch311x_wdt_data.runtime_reg + GP60); + /* disable timeout by setting it to 0 */ + sch311x_wdt_set_timeout(0); + + spin_unlock(&sch311x_wdt_data.io_lock); +} + +static void sch311x_wdt_keepalive(void) +{ + spin_lock(&sch311x_wdt_data.io_lock); + sch311x_wdt_set_timeout(timeout); + spin_unlock(&sch311x_wdt_data.io_lock); +} + +static int sch311x_wdt_set_heartbeat(int t) +{ + if (t < 1 || t > (255*60)) + return -EINVAL; + + /* When new timeout is bigger then 255 seconds, + * we will round up to minutes (with a max of 255) */ + if (t > 255) + t = (((t - 1) / 60) + 1) * 60; + + timeout = t; + return 0; +} + +static void sch311x_wdt_get_status(int *status) +{ + unsigned char new_status; + + *status = 0; + + spin_lock(&sch311x_wdt_data.io_lock); + + /* -- Watchdog timer control -- + * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured + * Bit 1 Reserved + * Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) + * Bit 3 P20 Force Timeout enabled: + * 0 = P20 activity does not generate the WD timeout event + * 1 = P20 Allows rising edge of P20, from the keyboard + * controller, to force the WD timeout event. + * Bit 4-7 Reserved + */ + new_status = inb(sch311x_wdt_data.runtime_reg + WDT_CTRL); + if (new_status & 0x01) + *status |= WDIOF_CARDRESET; + + spin_unlock(&sch311x_wdt_data.io_lock); +} + +/* + * /dev/watchdog handling + */ + +static ssize_t sch311x_wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + sch311x_wdt_expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (c == 'V') + sch311x_wdt_expect_close = 42; + } + } + sch311x_wdt_keepalive(); + } + return count; +} + +static long sch311x_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int status; + int new_timeout; + void __user *argp = (void __user *)arg; + int __user *p = argp; + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = DRV_NAME, + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + { + sch311x_wdt_get_status(&status); + return put_user(status, p); + } + case WDIOC_GETBOOTSTATUS: + return put_user(sch311x_wdt_data.boot_status, p); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + sch311x_wdt_stop(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + sch311x_wdt_start(); + retval = 0; + } + return retval; + } + case WDIOC_KEEPALIVE: + sch311x_wdt_keepalive(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (sch311x_wdt_set_heartbeat(new_timeout)) + return -EINVAL; + sch311x_wdt_keepalive(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; + } + return 0; +} + +static int sch311x_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &sch311x_wdt_is_open)) + return -EBUSY; + /* + * Activate + */ + sch311x_wdt_start(); + return nonseekable_open(inode, file); +} + +static int sch311x_wdt_close(struct inode *inode, struct file *file) +{ + if (sch311x_wdt_expect_close == 42) { + sch311x_wdt_stop(); + } else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); + sch311x_wdt_keepalive(); + } + clear_bit(0, &sch311x_wdt_is_open); + sch311x_wdt_expect_close = 0; + return 0; +} + +/* + * Kernel Interfaces + */ + +static const struct file_operations sch311x_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = sch311x_wdt_write, + .unlocked_ioctl = sch311x_wdt_ioctl, + .open = sch311x_wdt_open, + .release = sch311x_wdt_close, +}; + +static struct miscdevice sch311x_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &sch311x_wdt_fops, +}; + +/* + * Init & exit routines + */ + +static int __devinit sch311x_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + unsigned char val; + int err; + + spin_lock_init(&sch311x_wdt_data.io_lock); + + if (!request_region(sch311x_wdt_data.runtime_reg + RESGEN, 1, + DRV_NAME)) { + dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", + sch311x_wdt_data.runtime_reg + RESGEN, + sch311x_wdt_data.runtime_reg + RESGEN); + err = -EBUSY; + goto exit; + } + + if (!request_region(sch311x_wdt_data.runtime_reg + GP60, 1, DRV_NAME)) { + dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", + sch311x_wdt_data.runtime_reg + GP60, + sch311x_wdt_data.runtime_reg + GP60); + err = -EBUSY; + goto exit_release_region; + } + + if (!request_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4, + DRV_NAME)) { + dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", + sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, + sch311x_wdt_data.runtime_reg + WDT_CTRL); + err = -EBUSY; + goto exit_release_region2; + } + + /* Make sure that the watchdog is not running */ + sch311x_wdt_stop(); + + /* Disable keyboard and mouse interaction and interrupt */ + /* -- Watchdog timer configuration -- + * Bit 0 Reserved + * Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. + * Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr + * Bit 3 Reserved + * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, + * 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) + */ + outb(0, sch311x_wdt_data.runtime_reg + WDT_CFG); + + /* Check that the heartbeat value is within it's range ; + * if not reset to the default */ + if (sch311x_wdt_set_heartbeat(timeout)) { + sch311x_wdt_set_heartbeat(WATCHDOG_TIMEOUT); + dev_info(dev, "timeout value must be 1<=x<=15300, using %d\n", + timeout); + } + + /* Get status at boot */ + sch311x_wdt_get_status(&sch311x_wdt_data.boot_status); + + /* enable watchdog */ + /* -- Reset Generator -- + * Bit 0 Enable Watchdog Timer Generation: 0* = Enabled, 1 = Disabled + * Bit 1 Thermtrip Source Select: O* = No Source, 1 = Source + * Bit 2 WDT2_CTL: WDT input bit + * Bit 3-7 Reserved + */ + outb(0, sch311x_wdt_data.runtime_reg + RESGEN); + val = therm_trip ? 0x06 : 0x04; + outb(val, sch311x_wdt_data.runtime_reg + RESGEN); + + err = misc_register(&sch311x_wdt_miscdev); + if (err != 0) { + dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, err); + goto exit_release_region3; + } + + sch311x_wdt_miscdev.parent = dev; + + dev_info(dev, + "SMSC SCH311x WDT initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + + return 0; + +exit_release_region3: + release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4); +exit_release_region2: + release_region(sch311x_wdt_data.runtime_reg + GP60, 1); +exit_release_region: + release_region(sch311x_wdt_data.runtime_reg + RESGEN, 1); + sch311x_wdt_data.runtime_reg = 0; +exit: + return err; +} + +static int __devexit sch311x_wdt_remove(struct platform_device *pdev) +{ + /* Stop the timer before we leave */ + if (!nowayout) + sch311x_wdt_stop(); + + /* Deregister */ + misc_deregister(&sch311x_wdt_miscdev); + release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4); + release_region(sch311x_wdt_data.runtime_reg + GP60, 1); + release_region(sch311x_wdt_data.runtime_reg + RESGEN, 1); + sch311x_wdt_data.runtime_reg = 0; + return 0; +} + +static void sch311x_wdt_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + sch311x_wdt_stop(); +} + +#define sch311x_wdt_suspend NULL +#define sch311x_wdt_resume NULL + +static struct platform_driver sch311x_wdt_driver = { + .probe = sch311x_wdt_probe, + .remove = __devexit_p(sch311x_wdt_remove), + .shutdown = sch311x_wdt_shutdown, + .suspend = sch311x_wdt_suspend, + .resume = sch311x_wdt_resume, + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init sch311x_detect(int sio_config_port, unsigned short *addr) +{ + int err = 0, reg; + unsigned short base_addr; + unsigned char dev_id; + + sch311x_sio_enter(sio_config_port); + + /* Check device ID. We currently know about: + * SCH3112 (0x7c), SCH3114 (0x7d), and SCH3116 (0x7f). */ + reg = force_id ? force_id : sch311x_sio_inb(sio_config_port, 0x20); + if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) { + err = -ENODEV; + goto exit; + } + dev_id = reg == 0x7c ? 2 : reg == 0x7d ? 4 : 6; + + /* Select logical device A (runtime registers) */ + sch311x_sio_outb(sio_config_port, 0x07, 0x0a); + + /* Check if Logical Device Register is currently active */ + if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0) + printk(KERN_INFO PFX "Seems that LDN 0x0a is not active...\n"); + + /* Get the base address of the runtime registers */ + base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) | + sch311x_sio_inb(sio_config_port, 0x61); + if (!base_addr) { + printk(KERN_ERR PFX "Base address not set.\n"); + err = -ENODEV; + goto exit; + } + *addr = base_addr; + + printk(KERN_INFO PFX "Found an SMSC SCH311%d chip at 0x%04x\n", + dev_id, base_addr); + +exit: + sch311x_sio_exit(sio_config_port); + return err; +} + +static int __init sch311x_wdt_init(void) +{ + int err, i, found = 0; + unsigned short addr = 0; + + for (i = 0; !found && sch311x_ioports[i]; i++) + if (sch311x_detect(sch311x_ioports[i], &addr) == 0) + found++; + + if (!found) + return -ENODEV; + + sch311x_wdt_data.runtime_reg = addr; + + err = platform_driver_register(&sch311x_wdt_driver); + if (err) + return err; + + sch311x_wdt_pdev = platform_device_register_simple(DRV_NAME, addr, + NULL, 0); + + if (IS_ERR(sch311x_wdt_pdev)) { + err = PTR_ERR(sch311x_wdt_pdev); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&sch311x_wdt_driver); + return err; +} + +static void __exit sch311x_wdt_exit(void) +{ + platform_device_unregister(sch311x_wdt_pdev); + platform_driver_unregister(&sch311x_wdt_driver); +} + +module_init(sch311x_wdt_init); +module_exit(sch311x_wdt_exit); + +MODULE_AUTHOR("Wim Van Sebroeck "); +MODULE_DESCRIPTION("SMSC SCH311x WatchDog Timer Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + -- cgit v1.2.3 From a2a22b58e5a1a58fb978802de3a6d39f8378a5f3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 6 Nov 2008 10:56:21 +0000 Subject: [WATCHDOG] Add support for the WM8350 watchdog This driver implements support for the watchdog functionality provided by the Wolfson Microelectronics WM8350, a multi-function audio and power management subsystem intended for use in embedded systems. It is based on a driver originally written by Graeme Gregory, though it has been extensively modified since then. Use of a GPIO to kick the watchdog is not yet supported. Signed-off-by: Mark Brown Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 7 + drivers/watchdog/Makefile | 1 + drivers/watchdog/wm8350_wdt.c | 329 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 337 insertions(+) create mode 100644 drivers/watchdog/wm8350_wdt.c (limited to 'drivers') diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index fc36d93a897f..af99c44cf787 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -55,6 +55,13 @@ config SOFT_WATCHDOG To compile this driver as a module, choose M here: the module will be called softdog. +config WM8350_WATCHDOG + tristate "WM8350 watchdog" + depends on MFD_WM8350 + help + Support for the watchdog in the WM8350 AudioPlus PMIC. When + the watchdog triggers the system will be reset. + # ALPHA Architecture # ARM Architecture diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 0cd47867b194..c19b866f5ed1 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -134,4 +134,5 @@ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o # XTENSA Architecture # Architecture Independant +obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c new file mode 100644 index 000000000000..2bc0d4d4b415 --- /dev/null +++ b/drivers/watchdog/wm8350_wdt.c @@ -0,0 +1,329 @@ +/* + * Watchdog driver for the wm8350 + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static unsigned long wm8350_wdt_users; +static struct miscdevice wm8350_wdt_miscdev; +static int wm8350_wdt_expect_close; +static DEFINE_MUTEX(wdt_mutex); + +static struct { + int time; /* Seconds */ + u16 val; /* To be set in WM8350_SYSTEM_CONTROL_2 */ +} wm8350_wdt_cfgs[] = { + { 1, 0x02 }, + { 2, 0x04 }, + { 4, 0x05 }, +}; + +static struct wm8350 *get_wm8350(void) +{ + return dev_get_drvdata(wm8350_wdt_miscdev.parent); +} + +static int wm8350_wdt_set_timeout(struct wm8350 *wm8350, u16 value) +{ + int ret; + u16 reg; + + mutex_lock(&wdt_mutex); + wm8350_reg_unlock(wm8350); + + reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); + reg &= ~WM8350_WDOG_TO_MASK; + reg |= value; + ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg); + + wm8350_reg_lock(wm8350); + mutex_unlock(&wdt_mutex); + + return ret; +} + +static int wm8350_wdt_start(struct wm8350 *wm8350) +{ + int ret; + u16 reg; + + mutex_lock(&wdt_mutex); + wm8350_reg_unlock(wm8350); + + reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); + reg &= ~WM8350_WDOG_MODE_MASK; + reg |= 0x20; + ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg); + + wm8350_reg_lock(wm8350); + mutex_unlock(&wdt_mutex); + + return ret; +} + +static int wm8350_wdt_stop(struct wm8350 *wm8350) +{ + int ret; + u16 reg; + + mutex_lock(&wdt_mutex); + wm8350_reg_unlock(wm8350); + + reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); + reg &= ~WM8350_WDOG_MODE_MASK; + ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg); + + wm8350_reg_lock(wm8350); + mutex_unlock(&wdt_mutex); + + return ret; +} + +static int wm8350_wdt_kick(struct wm8350 *wm8350) +{ + int ret; + u16 reg; + + mutex_lock(&wdt_mutex); + + reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); + ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg); + + mutex_unlock(&wdt_mutex); + + return ret; +} + +static int wm8350_wdt_open(struct inode *inode, struct file *file) +{ + struct wm8350 *wm8350 = get_wm8350(); + int ret; + + if (!wm8350) + return -ENODEV; + + if (test_and_set_bit(0, &wm8350_wdt_users)) + return -EBUSY; + + ret = wm8350_wdt_start(wm8350); + if (ret != 0) + return ret; + + return nonseekable_open(inode, file); +} + +static int wm8350_wdt_release(struct inode *inode, struct file *file) +{ + struct wm8350 *wm8350 = get_wm8350(); + + if (wm8350_wdt_expect_close) + wm8350_wdt_stop(wm8350); + else { + dev_warn(wm8350->dev, "Watchdog device closed uncleanly\n"); + wm8350_wdt_kick(wm8350); + } + + clear_bit(0, &wm8350_wdt_users); + + return 0; +} + +static ssize_t wm8350_wdt_write(struct file *file, + const char __user *data, size_t count, + loff_t *ppos) +{ + struct wm8350 *wm8350 = get_wm8350(); + size_t i; + + if (count) { + wm8350_wdt_kick(wm8350); + + if (!nowayout) { + /* In case it was set long ago */ + wm8350_wdt_expect_close = 0; + + /* scan to see whether or not we got the magic + character */ + for (i = 0; i != count; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + wm8350_wdt_expect_close = 42; + } + } + } + return count; +} + +static struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "WM8350 Watchdog", +}; + +static long wm8350_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct wm8350 *wm8350 = get_wm8350(); + int ret = -ENOTTY, time, i; + void __user *argp = (void __user *)arg; + int __user *p = argp; + u16 reg; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + ret = put_user(0, p); + break; + + case WDIOC_SETOPTIONS: + { + int options; + + if (get_user(options, p)) + return -EFAULT; + + ret = -EINVAL; + + /* Setting both simultaneously means at least one must fail */ + if (options == WDIOS_DISABLECARD) + ret = wm8350_wdt_start(wm8350); + + if (options == WDIOS_ENABLECARD) + ret = wm8350_wdt_stop(wm8350); + break; + } + + case WDIOC_KEEPALIVE: + ret = wm8350_wdt_kick(wm8350); + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(time, p); + if (ret) + break; + + if (time == 0) { + if (nowayout) + ret = -EINVAL; + else + wm8350_wdt_stop(wm8350); + break; + } + + for (i = 0; i < ARRAY_SIZE(wm8350_wdt_cfgs); i++) + if (wm8350_wdt_cfgs[i].time == time) + break; + if (i == ARRAY_SIZE(wm8350_wdt_cfgs)) + ret = -EINVAL; + else + ret = wm8350_wdt_set_timeout(wm8350, + wm8350_wdt_cfgs[i].val); + break; + + case WDIOC_GETTIMEOUT: + reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2); + reg &= WM8350_WDOG_TO_MASK; + for (i = 0; i < ARRAY_SIZE(wm8350_wdt_cfgs); i++) + if (wm8350_wdt_cfgs[i].val == reg) + break; + if (i == ARRAY_SIZE(wm8350_wdt_cfgs)) { + dev_warn(wm8350->dev, + "Unknown watchdog configuration: %x\n", reg); + ret = -EINVAL; + } else + ret = put_user(wm8350_wdt_cfgs[i].time, p); + + } + + return ret; +} + +static const struct file_operations wm8350_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wm8350_wdt_write, + .unlocked_ioctl = wm8350_wdt_ioctl, + .open = wm8350_wdt_open, + .release = wm8350_wdt_release, +}; + +static struct miscdevice wm8350_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wm8350_wdt_fops, +}; + +static int wm8350_wdt_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + + if (!wm8350) { + dev_err(wm8350->dev, "No driver data supplied\n"); + return -ENODEV; + } + + /* Default to 4s timeout */ + wm8350_wdt_set_timeout(wm8350, 0x05); + + wm8350_wdt_miscdev.parent = &pdev->dev; + + return misc_register(&wm8350_wdt_miscdev); +} + +static int __exit wm8350_wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&wm8350_wdt_miscdev); + + return 0; +} + +static struct platform_driver wm8350_wdt_driver = { + .probe = wm8350_wdt_probe, + .remove = wm8350_wdt_remove, + .driver = { + .name = "wm8350-wdt", + }, +}; + +static int __init wm8350_wdt_init(void) +{ + return platform_driver_register(&wm8350_wdt_driver); +} +module_init(wm8350_wdt_init); + +static void __exit wm8350_wdt_exit(void) +{ + platform_driver_unregister(&wm8350_wdt_driver); +} +module_exit(wm8350_wdt_exit); + +MODULE_AUTHOR("Mark Brown"); +MODULE_DESCRIPTION("WM8350 Watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-wdt"); -- cgit v1.2.3