From 4de632544dbaeabafba6aa42e9a1971ec8eeb022 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Sun, 22 Jul 2007 18:05:44 +0200 Subject: ide: clear bmdma status in ide_intr() for ICHx controllers (revised #4) patch 1/2 (revised): - Fix drive->waiting_for_dma to work with CDB-intr devices. - Do the dma status clearing in ide_intr() and add a new hwif->ide_dma_clear_irq for Intel ICHx controllers. Revised per Alan, Sergei and Bart's advice. Patch against 2.6.20-rc6. Tested ok on my ICH4 and pdc20275 adapters. Please review/apply, thanks. Signed-off-by: Albert Lee Signed-off-by: Adrian Bunk --- drivers/ide/ide-cd.c | 8 +++++++ drivers/ide/ide-io.c | 11 +++++++++ drivers/ide/ide.c | 1 + drivers/ide/pci/piix.c | 63 ++++++++++++++++++++++++++++++++++++++------------ 4 files changed, 68 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3325660f7248..72c4dd896bec 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -859,6 +859,10 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) { + /* waiting for CDB interrupt, not DMA yet. */ + if (info->dma) + drive->waiting_for_dma = 0; + /* packet command */ ide_execute_command(drive, WIN_PACKETCMD, handler, ATAPI_WAIT_PC, cdrom_timer_expiry); return ide_started; @@ -901,6 +905,10 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive, /* Check for errors. */ if (cdrom_decode_status(drive, DRQ_STAT, NULL)) return ide_stopped; + + /* Ok, next interrupt will be DMA interrupt. */ + if (info->dma) + drive->waiting_for_dma = 1; } else { /* Otherwise, we must wait for DRQ to get set. */ if (ide_wait_stat(&startstop, drive, DRQ_STAT, diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 574855456d45..bbad32f3ca2c 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1561,6 +1561,17 @@ irqreturn_t ide_intr (int irq, void *dev_id, struct pt_regs *regs) del_timer(&hwgroup->timer); spin_unlock(&ide_lock); + /* Some controllers might set DMA INTR no matter DMA or PIO; + * bmdma status might need to be cleared even for + * PIO interrupts to prevent spurious/lost irq. + */ + if (hwif->ide_dma_clear_irq && !(drive->waiting_for_dma)) + /* ide_dma_end() needs bmdma status for error checking. + * So, skip clearing bmdma status here and leave it + * to ide_dma_end() if this is dma interrupt. + */ + hwif->ide_dma_clear_irq(drive); + if (drive->unmask) local_irq_enable(); /* service this interrupt, may set handler for next interrupt */ diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index b2cc43702f65..1485ba8e05c9 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -505,6 +505,7 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->ide_dma_on = tmp_hwif->ide_dma_on; hwif->ide_dma_off_quietly = tmp_hwif->ide_dma_off_quietly; hwif->ide_dma_test_irq = tmp_hwif->ide_dma_test_irq; + hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq; hwif->ide_dma_host_on = tmp_hwif->ide_dma_host_on; hwif->ide_dma_host_off = tmp_hwif->ide_dma_host_off; hwif->ide_dma_lostirq = tmp_hwif->ide_dma_lostirq; diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index e9b83e1a3028..d41538b8a18a 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -423,17 +423,14 @@ fast_ata_pio: } /** - * init_chipset_piix - set up the PIIX chipset - * @dev: PCI device to set up - * @name: Name of the device + * piix_is_ichx - check if ICHx + * @dev: PCI device to check * - * Initialize the PCI device as required. For the PIIX this turns - * out to be nice and simple + * returns 1 if ICHx, 0 otherwise. */ - -static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char *name) +static int piix_is_ichx(struct pci_dev *dev) { - switch(dev->device) { + switch (dev->device) { case PCI_DEVICE_ID_INTEL_82801EB_1: case PCI_DEVICE_ID_INTEL_82801AA_1: case PCI_DEVICE_ID_INTEL_82801AB_1: @@ -451,18 +448,50 @@ static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char case PCI_DEVICE_ID_INTEL_ICH7_21: case PCI_DEVICE_ID_INTEL_ESB2_18: case PCI_DEVICE_ID_INTEL_ICH8_6: - { - unsigned int extra = 0; - pci_read_config_dword(dev, 0x54, &extra); - pci_write_config_dword(dev, 0x54, extra|0x400); - } - default: - break; + return 1; } return 0; } +/** + * init_chipset_piix - set up the PIIX chipset + * @dev: PCI device to set up + * @name: Name of the device + * + * Initialize the PCI device as required. For the PIIX this turns + * out to be nice and simple + */ + +static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char *name) +{ + if (piix_is_ichx(dev)) { + unsigned int extra = 0; + pci_read_config_dword(dev, 0x54, &extra); + pci_write_config_dword(dev, 0x54, extra|0x400); + } + + return 0; +} + +/** + * piix_dma_clear_irq - clear BMDMA status + * @drive: IDE drive to clear + * + * Called from ide_intr() for PIO interrupts + * to clear BMDMA status as needed by ICHx + */ +static void piix_dma_clear_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_stat; + + /* clear the INTR & ERROR bits */ + dma_stat = hwif->INB(hwif->dma_status); + /* Should we force the bit as well ? */ + hwif->OUTB(dma_stat, hwif->dma_status); +} + /** * init_hwif_piix - fill in the hwif for the PIIX * @hwif: IDE interface @@ -495,6 +524,10 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) if (!hwif->dma_base) return; + /* ICHx need to clear the bmdma status for all interrupts */ + if (piix_is_ichx(hwif->pci_dev)) + hwif->ide_dma_clear_irq = &piix_dma_clear_irq; + hwif->atapi_dma = 1; hwif->ultra_mask = 0x3f; hwif->mwdma_mask = 0x06; -- cgit v1.2.3