From f17f5c91ae3bfeb5cfc37fa132a5fdfceb8927be Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 14 Jan 2009 14:36:12 -0800 Subject: gro: Check for GSO packets and packets with frag_list As GRO cannot be applied to packets with frag_list we need to make sure that we reject such packets if they are fed to us, e.g., through a tunnel device. Also there is no point in applying GRO on GSO packets so they too should be rejected. This allows GRO to be used in virtio-net which may produce GSO packets directly but may still benefit from GRO if the other end of it doesn't support GSO. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'net/core/dev.c') diff --git a/net/core/dev.c b/net/core/dev.c index b715a55cccc4..7dec715293b1 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2392,6 +2392,9 @@ int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb) if (!(skb->dev->features & NETIF_F_GRO)) goto normal; + if (skb_is_gso(skb) || skb_shinfo(skb)->frag_list) + goto normal; + rcu_read_lock(); list_for_each_entry_rcu(ptype, head, list) { struct sk_buff *p; -- cgit v1.2.3 From f557206800801410c30e53ce7a27219b2c4cf0ba Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 14 Jan 2009 20:40:03 -0800 Subject: gro: Fix page ref count for skbs freed normally When an skb with page frags is merged into an existing one, we cannibalise its reference count. This is OK when the skb is reused because we set nr_frags to zero in that case. However, for the case where the skb is freed through kfree_skb, we didn't clear nr_frags which causes the page to be freed prematurely. This is fixed by moving the skb resetting into skb_gro_receive. Reported-by: Jeff Kirsher Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 6 ------ net/core/skbuff.c | 6 ++++++ 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'net/core/dev.c') diff --git a/net/core/dev.c b/net/core/dev.c index 7dec715293b1..60377b6c0a80 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2491,12 +2491,6 @@ EXPORT_SYMBOL(napi_gro_receive); void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb) { - skb_shinfo(skb)->nr_frags = 0; - - skb->len -= skb->data_len; - skb->truesize -= skb->data_len; - skb->data_len = 0; - __skb_pull(skb, skb_headlen(skb)); skb_reserve(skb, NET_IP_ALIGN - skb_headroom(skb)); diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 5110b359c758..65eac7739033 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2602,6 +2602,12 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb) skb_shinfo(skb)->nr_frags * sizeof(skb_frag_t)); skb_shinfo(p)->nr_frags += skb_shinfo(skb)->nr_frags; + skb_shinfo(skb)->nr_frags = 0; + + skb->truesize -= skb->data_len; + skb->len -= skb->data_len; + skb->data_len = 0; + NAPI_GRO_CB(skb)->free = 1; goto done; } -- cgit v1.2.3 From 937f1ba56b4be37d9e2ad77412f95048662058d2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 14 Jan 2009 21:05:05 -0800 Subject: net: Add init_dummy_netdev() and fix EMAC driver using it This adds an init_dummy_netdev() function that gets a network device structure (allocation and lifetime entirely under caller's control) and initialize the minimum amount of fields so it can be used to schedule NAPI polls without registering a full blown interface. This is to be used by drivers that need to tie several hardware interfaces to a single NAPI poll scheduler due to HW limitations. It also updates the ibm_newemac driver to use that, this fixing the oops on 2.6.29 due to passing NULL as "dev" to netif_napi_add() Symbol is exported GPL only a I don't think we want binary drivers doing that sort of acrobatics (if we want them at all). Signed-off-by: Benjamin Herrenschmidt Tested-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ibm_newemac/mal.c | 4 +++- drivers/net/ibm_newemac/mal.h | 2 ++ include/linux/netdevice.h | 3 +++ net/core/dev.c | 39 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 47 insertions(+), 1 deletion(-) (limited to 'net/core/dev.c') diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c index ecf9798987fa..2a2fc17b2878 100644 --- a/drivers/net/ibm_newemac/mal.c +++ b/drivers/net/ibm_newemac/mal.c @@ -613,7 +613,9 @@ static int __devinit mal_probe(struct of_device *ofdev, INIT_LIST_HEAD(&mal->list); spin_lock_init(&mal->lock); - netif_napi_add(NULL, &mal->napi, mal_poll, + init_dummy_netdev(&mal->dummy_dev); + + netif_napi_add(&mal->dummy_dev, &mal->napi, mal_poll, CONFIG_IBM_NEW_EMAC_POLL_WEIGHT); /* Load power-on reset defaults */ diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h index 2f0a87360844..9ededfbf0726 100644 --- a/drivers/net/ibm_newemac/mal.h +++ b/drivers/net/ibm_newemac/mal.h @@ -214,6 +214,8 @@ struct mal_instance { int index; spinlock_t lock; + struct net_device dummy_dev; + unsigned int features; }; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 4647604c7ca9..ec54785d34f9 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -795,6 +795,7 @@ struct net_device NETREG_UNREGISTERING, /* called unregister_netdevice */ NETREG_UNREGISTERED, /* completed unregister todo */ NETREG_RELEASED, /* called free_netdev */ + NETREG_DUMMY, /* dummy device for NAPI poll */ } reg_state; /* Called from unregister, can be used to call free_netdev */ @@ -1077,6 +1078,8 @@ extern void free_netdev(struct net_device *dev); extern void synchronize_net(void); extern int register_netdevice_notifier(struct notifier_block *nb); extern int unregister_netdevice_notifier(struct notifier_block *nb); +extern int init_dummy_netdev(struct net_device *dev); + extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev); extern struct net_device *dev_get_by_index(struct net *net, int ifindex); extern struct net_device *__dev_get_by_index(struct net *net, int ifindex); diff --git a/net/core/dev.c b/net/core/dev.c index 60377b6c0a80..8d675975d85b 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4430,6 +4430,45 @@ err_uninit: goto out; } +/** + * init_dummy_netdev - init a dummy network device for NAPI + * @dev: device to init + * + * This takes a network device structure and initialize the minimum + * amount of fields so it can be used to schedule NAPI polls without + * registering a full blown interface. This is to be used by drivers + * that need to tie several hardware interfaces to a single NAPI + * poll scheduler due to HW limitations. + */ +int init_dummy_netdev(struct net_device *dev) +{ + /* Clear everything. Note we don't initialize spinlocks + * are they aren't supposed to be taken by any of the + * NAPI code and this dummy netdev is supposed to be + * only ever used for NAPI polls + */ + memset(dev, 0, sizeof(struct net_device)); + + /* make sure we BUG if trying to hit standard + * register/unregister code path + */ + dev->reg_state = NETREG_DUMMY; + + /* initialize the ref count */ + atomic_set(&dev->refcnt, 1); + + /* NAPI wants this */ + INIT_LIST_HEAD(&dev->napi_list); + + /* a dummy interface is started by default */ + set_bit(__LINK_STATE_PRESENT, &dev->state); + set_bit(__LINK_STATE_START, &dev->state); + + return 0; +} +EXPORT_SYMBOL_GPL(init_dummy_netdev); + + /** * register_netdev - register a network device * @dev: device to register -- cgit v1.2.3 From 67fd1a731ff1a990d4da7689909317756e50cb4d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 19 Jan 2009 16:26:44 -0800 Subject: net: Add debug info to track down GSO checksum bug I'm trying to track down why people're hitting the checksum warning in skb_gso_segment. As the problem seems to be hitting lots of people and I can't reproduce it or locate the bug, here is a patch to print out more details which hopefully should help us to track this down. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'net/core/dev.c') diff --git a/net/core/dev.c b/net/core/dev.c index 8d675975d85b..6e44c3277101 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1534,7 +1534,19 @@ struct sk_buff *skb_gso_segment(struct sk_buff *skb, int features) skb->mac_len = skb->network_header - skb->mac_header; __skb_pull(skb, skb->mac_len); - if (WARN_ON(skb->ip_summed != CHECKSUM_PARTIAL)) { + if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) { + struct net_device *dev = skb->dev; + struct ethtool_drvinfo info = {}; + + if (dev && dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) + dev->ethtool_ops->get_drvinfo(dev, &info); + + WARN(1, "%s: caps=(0x%lx, 0x%lx) len=%d data_len=%d " + "ip_summed=%d", + info.driver, dev ? dev->features : 0L, + skb->sk ? skb->sk->sk_route_caps : 0L, + skb->len, skb->data_len, skb->ip_summed); + if (skb_header_cloned(skb) && (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) return ERR_PTR(err); -- cgit v1.2.3 From 9a8e47ffd95608f0768e1a8a0225c822aa53aa9b Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 17 Jan 2009 19:47:18 +0000 Subject: gro: Fix error handling on extremely short frags When a frag is shorter than an Ethernet header, we'd return a zeroed packet instead of aborting. This patch fixes that. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net/core/dev.c') diff --git a/net/core/dev.c b/net/core/dev.c index 6e44c3277101..5379b0c1190a 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2536,6 +2536,7 @@ struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi, if (!pskb_may_pull(skb, ETH_HLEN)) { napi_reuse_skb(napi, skb); + skb = NULL; goto out; } -- cgit v1.2.3 From b4bd07c20ba0c1fa7ad09ba257e0a5cfc2bf6bb3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 6 Feb 2009 22:06:43 -0800 Subject: net_dma: call dmaengine_get only if NET_DMA enabled Based upon a patch from Atsushi Nemoto -------------------- The commit 649274d993212e7c23c0cb734572c2311c200872 ("net_dma: acquire/release dma channels on ifup/ifdown") added unconditional call of dmaengine_get() to net_dma. The API should be called only if NET_DMA was enabled. -------------------- Signed-off-by: David S. Miller Acked-by: Dan Williams --- include/linux/dmaengine.h | 12 ++++++++++++ net/core/dev.c | 4 ++-- 2 files changed, 14 insertions(+), 2 deletions(-) (limited to 'net/core/dev.c') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 3e0f64c335c8..3e68469c1885 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -282,6 +282,18 @@ static inline void dmaengine_put(void) } #endif +#ifdef CONFIG_NET_DMA +#define net_dmaengine_get() dmaengine_get() +#define net_dmaengine_put() dmaengine_put() +#else +static inline void net_dmaengine_get(void) +{ +} +static inline void net_dmaengine_put(void) +{ +} +#endif + dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest, void *src, size_t len); dma_cookie_t dma_async_memcpy_buf_to_pg(struct dma_chan *chan, diff --git a/net/core/dev.c b/net/core/dev.c index 5379b0c1190a..a17e00662363 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1090,7 +1090,7 @@ int dev_open(struct net_device *dev) /* * Enable NET_DMA */ - dmaengine_get(); + net_dmaengine_get(); /* * Initialize multicasting status @@ -1172,7 +1172,7 @@ int dev_close(struct net_device *dev) /* * Shutdown NET_DMA */ - dmaengine_put(); + net_dmaengine_put(); return 0; } -- cgit v1.2.3 From 4ead443163b798661c2a2ede5e512e116a9e41e7 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 1 Mar 2009 00:11:52 -0800 Subject: netpoll: Add drop checks to all entry points The netpoll entry checks are required to ensure that we don't receive normal packets when invoked via netpoll. Unfortunately it only ever worked for the netif_receive_skb/netif_rx entry points. The VLAN (and subsequently GRO) entry point didn't have the check and therefore can trigger all sorts of weird problems. This patch adds the netpoll check to all entry points. I'm still uneasy with receiving at all under netpoll (which apparently is only used by the out-of-tree kdump code). The reason is it is perfectly legal to receive all data including headers into highmem if netpoll is off, but if you try to do that with netpoll on and someone gets a printk in an IRQ handler you're going to get a nice BUG_ON. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/8021q/vlan_core.c | 10 ++++++++++ net/core/dev.c | 6 ++++++ 2 files changed, 16 insertions(+) (limited to 'net/core/dev.c') diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index e9db889d6222..2886d2fb9ab5 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -1,12 +1,16 @@ #include #include #include +#include #include "vlan.h" /* VLAN rx hw acceleration helper. This acts like netif_{rx,receive_skb}(). */ int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, u16 vlan_tci, int polling) { + if (netpoll_rx(skb)) + return NET_RX_DROP; + if (skb_bond_should_drop(skb)) goto drop; @@ -100,6 +104,9 @@ int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp, { int err = NET_RX_SUCCESS; + if (netpoll_receive_skb(skb)) + return NET_RX_DROP; + switch (vlan_gro_common(napi, grp, vlan_tci, skb)) { case -1: return netif_receive_skb(skb); @@ -126,6 +133,9 @@ int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp, if (!skb) goto out; + if (netpoll_receive_skb(skb)) + goto out; + err = NET_RX_SUCCESS; switch (vlan_gro_common(napi, grp, vlan_tci, skb)) { diff --git a/net/core/dev.c b/net/core/dev.c index a17e00662363..72b0d26fd46d 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2488,6 +2488,9 @@ static int __napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb) int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb) { + if (netpoll_receive_skb(skb)) + return NET_RX_DROP; + switch (__napi_gro_receive(napi, skb)) { case -1: return netif_receive_skb(skb); @@ -2558,6 +2561,9 @@ int napi_gro_frags(struct napi_struct *napi, struct napi_gro_fraginfo *info) if (!skb) goto out; + if (netpoll_receive_skb(skb)) + goto out; + err = NET_RX_SUCCESS; switch (__napi_gro_receive(napi, skb)) { -- cgit v1.2.3 From 17edde520927070a6bf14a6a75027c0b843443e5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sun, 22 Feb 2009 00:11:09 -0800 Subject: netns: Remove net_alive It turns out that net_alive is unnecessary, and the original problem that led to it being added was simply that the icmp code thought it was a network device and wound up being unable to handle packets while there were still packets in the network namespace. Now that icmp and tcp have been fixed to properly register themselves this problem is no longer present and we have a stronger guarantee that packets will not arrive in a network namespace then that provided by net_alive in netif_receive_skb. So remove net_alive allowing packet reception run a little faster. Additionally document the strong reason why network namespace cleanup is safe so that if something happens again someone else will have a chance of figuring it out. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- include/net/net_namespace.h | 27 +++++++++++++++++---------- net/core/dev.c | 6 ------ net/core/net_namespace.c | 3 --- 3 files changed, 17 insertions(+), 19 deletions(-) (limited to 'net/core/dev.c') diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 6fc13d905c5f..ded434b032a4 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -109,11 +109,6 @@ extern struct list_head net_namespace_list; #ifdef CONFIG_NET_NS extern void __put_net(struct net *net); -static inline int net_alive(struct net *net) -{ - return net && atomic_read(&net->count); -} - static inline struct net *get_net(struct net *net) { atomic_inc(&net->count); @@ -145,11 +140,6 @@ int net_eq(const struct net *net1, const struct net *net2) } #else -static inline int net_alive(struct net *net) -{ - return 1; -} - static inline struct net *get_net(struct net *net) { return net; @@ -234,6 +224,23 @@ struct pernet_operations { void (*exit)(struct net *net); }; +/* + * Use these carefully. If you implement a network device and it + * needs per network namespace operations use device pernet operations, + * otherwise use pernet subsys operations. + * + * This is critically important. Most of the network code cleanup + * runs with the assumption that dev_remove_pack has been called so no + * new packets will arrive during and after the cleanup functions have + * been called. dev_remove_pack is not per namespace so instead the + * guarantee of no more packets arriving in a network namespace is + * provided by ensuring that all network devices and all sockets have + * left the network namespace before the cleanup methods are called. + * + * For the longest time the ipv4 icmp code was registered as a pernet + * device which caused kernel oops, and panics during network + * namespace cleanup. So please don't get this wrong. + */ extern int register_pernet_subsys(struct pernet_operations *); extern void unregister_pernet_subsys(struct pernet_operations *); extern int register_pernet_gen_subsys(int *id, struct pernet_operations *); diff --git a/net/core/dev.c b/net/core/dev.c index 72b0d26fd46d..9e4afe650e7a 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2267,12 +2267,6 @@ int netif_receive_skb(struct sk_buff *skb) rcu_read_lock(); - /* Don't receive packets in an exiting network namespace */ - if (!net_alive(dev_net(skb->dev))) { - kfree_skb(skb); - goto out; - } - #ifdef CONFIG_NET_CLS_ACT if (skb->tc_verd & TC_NCLS) { skb->tc_verd = CLR_TC_NCLS(skb->tc_verd); diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 2adb1a7d361f..e3bebd36f053 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -157,9 +157,6 @@ static void cleanup_net(struct work_struct *work) struct pernet_operations *ops; struct net *net; - /* Be very certain incoming network packets will not find us */ - rcu_barrier(); - net = container_of(work, struct net, work); mutex_lock(&net_mutex); -- cgit v1.2.3 From 54acd0efab072cb70e87206329d561b297f93bbb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 4 Mar 2009 23:01:02 -0800 Subject: net: Fix missing dev->neigh_setup in register_netdevice(). Signed-off-by: David S. Miller --- net/core/dev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net/core/dev.c') diff --git a/net/core/dev.c b/net/core/dev.c index 9e4afe650e7a..2dd484ed3dbb 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4339,6 +4339,7 @@ int register_netdevice(struct net_device *dev) dev->do_ioctl = ops->ndo_do_ioctl; dev->set_config = ops->ndo_set_config; dev->change_mtu = ops->ndo_change_mtu; + dev->neigh_setup = ops->ndo_neigh_setup; dev->tx_timeout = ops->ndo_tx_timeout; dev->get_stats = ops->ndo_get_stats; dev->vlan_rx_register = ops->ndo_vlan_rx_register; -- cgit v1.2.3 From 9d40bbda599def1e1d155d7f7dca14fe8744bd2b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 4 Mar 2009 23:46:25 -0800 Subject: vlan: Fix vlan-in-vlan crashes. As analyzed by Patrick McHardy, vlan needs to reset it's netdev_ops pointer in it's ->init() function but this leaves the compat method pointers stale. Add a netdev_resync_ops() and call it from the vlan code. Any other driver which changes ->netdev_ops after register_netdevice() will need to call this new function after doing so too. With help from Patrick McHardy. Tested-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netdevice.h | 1 + net/8021q/vlan_dev.c | 3 ++- net/core/dev.c | 56 ++++++++++++++++++++++++++++------------------- 3 files changed, 37 insertions(+), 23 deletions(-) (limited to 'net/core/dev.c') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ec54785d34f9..659366734f3f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1079,6 +1079,7 @@ extern void synchronize_net(void); extern int register_netdevice_notifier(struct notifier_block *nb); extern int unregister_netdevice_notifier(struct notifier_block *nb); extern int init_dummy_netdev(struct net_device *dev); +extern void netdev_resync_ops(struct net_device *dev); extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev); extern struct net_device *dev_get_by_index(struct net *net, int ifindex); diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 4a19acd3a32b..1b34135cf990 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -553,7 +553,7 @@ static int vlan_dev_neigh_setup(struct net_device *dev, struct neigh_parms *pa) int err = 0; if (netif_device_present(real_dev) && ops->ndo_neigh_setup) - err = ops->ndo_neigh_setup(dev, pa); + err = ops->ndo_neigh_setup(real_dev, pa); return err; } @@ -639,6 +639,7 @@ static int vlan_dev_init(struct net_device *dev) dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN; dev->netdev_ops = &vlan_netdev_ops; } + netdev_resync_ops(dev); if (is_vlan_dev(real_dev)) subclass = 1; diff --git a/net/core/dev.c b/net/core/dev.c index 2dd484ed3dbb..f1129706ce7b 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4282,6 +4282,39 @@ unsigned long netdev_fix_features(unsigned long features, const char *name) } EXPORT_SYMBOL(netdev_fix_features); +/* Some devices need to (re-)set their netdev_ops inside + * ->init() or similar. If that happens, we have to setup + * the compat pointers again. + */ +void netdev_resync_ops(struct net_device *dev) +{ +#ifdef CONFIG_COMPAT_NET_DEV_OPS + const struct net_device_ops *ops = dev->netdev_ops; + + dev->init = ops->ndo_init; + dev->uninit = ops->ndo_uninit; + dev->open = ops->ndo_open; + dev->change_rx_flags = ops->ndo_change_rx_flags; + dev->set_rx_mode = ops->ndo_set_rx_mode; + dev->set_multicast_list = ops->ndo_set_multicast_list; + dev->set_mac_address = ops->ndo_set_mac_address; + dev->validate_addr = ops->ndo_validate_addr; + dev->do_ioctl = ops->ndo_do_ioctl; + dev->set_config = ops->ndo_set_config; + dev->change_mtu = ops->ndo_change_mtu; + dev->neigh_setup = ops->ndo_neigh_setup; + dev->tx_timeout = ops->ndo_tx_timeout; + dev->get_stats = ops->ndo_get_stats; + dev->vlan_rx_register = ops->ndo_vlan_rx_register; + dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid; + dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = ops->ndo_poll_controller; +#endif +#endif +} +EXPORT_SYMBOL(netdev_resync_ops); + /** * register_netdevice - register a network device * @dev: device to register @@ -4326,28 +4359,7 @@ int register_netdevice(struct net_device *dev) * This is temporary until all network devices are converted. */ if (dev->netdev_ops) { - const struct net_device_ops *ops = dev->netdev_ops; - - dev->init = ops->ndo_init; - dev->uninit = ops->ndo_uninit; - dev->open = ops->ndo_open; - dev->change_rx_flags = ops->ndo_change_rx_flags; - dev->set_rx_mode = ops->ndo_set_rx_mode; - dev->set_multicast_list = ops->ndo_set_multicast_list; - dev->set_mac_address = ops->ndo_set_mac_address; - dev->validate_addr = ops->ndo_validate_addr; - dev->do_ioctl = ops->ndo_do_ioctl; - dev->set_config = ops->ndo_set_config; - dev->change_mtu = ops->ndo_change_mtu; - dev->neigh_setup = ops->ndo_neigh_setup; - dev->tx_timeout = ops->ndo_tx_timeout; - dev->get_stats = ops->ndo_get_stats; - dev->vlan_rx_register = ops->ndo_vlan_rx_register; - dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid; - dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ops->ndo_poll_controller; -#endif + netdev_resync_ops(dev); } else { char drivername[64]; pr_info("%s (%s): not using net_device_ops yet\n", -- cgit v1.2.3