From d39f3b4f33d245a08a7296a04bab80bd52466f58 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 8 Apr 2019 13:40:47 +0200 Subject: nl80211: reindent some sched scan code The sched scan code here is really deep - avoid one level of indentation by short-circuiting the loop instead of putting everything into the if block. Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 65 ++++++++++++++++++++++++++------------------------ 1 file changed, 34 insertions(+), 31 deletions(-) (limited to 'net') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 33408ba1d7ee..5c49d11fc477 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -7776,43 +7776,46 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev, goto out_free; ssid = tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID]; bssid = tb[NL80211_SCHED_SCAN_MATCH_ATTR_BSSID]; - if (ssid || bssid) { - if (WARN_ON(i >= n_match_sets)) { - /* this indicates a programming error, - * the loop above should have verified - * things properly - */ + + if (!ssid && !bssid) { + i++; + continue; + } + + if (WARN_ON(i >= n_match_sets)) { + /* this indicates a programming error, + * the loop above should have verified + * things properly + */ + err = -EINVAL; + goto out_free; + } + + if (ssid) { + if (nla_len(ssid) > IEEE80211_MAX_SSID_LEN) { err = -EINVAL; goto out_free; } - - if (ssid) { - if (nla_len(ssid) > IEEE80211_MAX_SSID_LEN) { - err = -EINVAL; - goto out_free; - } - memcpy(request->match_sets[i].ssid.ssid, - nla_data(ssid), nla_len(ssid)); - request->match_sets[i].ssid.ssid_len = - nla_len(ssid); - } - if (bssid) { - if (nla_len(bssid) != ETH_ALEN) { - err = -EINVAL; - goto out_free; - } - memcpy(request->match_sets[i].bssid, - nla_data(bssid), ETH_ALEN); + memcpy(request->match_sets[i].ssid.ssid, + nla_data(ssid), nla_len(ssid)); + request->match_sets[i].ssid.ssid_len = + nla_len(ssid); + } + if (bssid) { + if (nla_len(bssid) != ETH_ALEN) { + err = -EINVAL; + goto out_free; } + memcpy(request->match_sets[i].bssid, + nla_data(bssid), ETH_ALEN); + } - /* special attribute - old implementation w/a */ + /* special attribute - old implementation w/a */ + request->match_sets[i].rssi_thold = default_match_rssi; + rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI]; + if (rssi) request->match_sets[i].rssi_thold = - default_match_rssi; - rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI]; - if (rssi) - request->match_sets[i].rssi_thold = - nla_get_s32(rssi); - } + nla_get_s32(rssi); i++; } -- cgit v1.2.3 From 1e1b11b6a1111cd9e8af1fd6ccda270a9fa3eacf Mon Sep 17 00:00:00 2001 From: vamsi krishna Date: Fri, 1 Feb 2019 18:34:51 +0530 Subject: nl80211/cfg80211: Specify band specific min RSSI thresholds with sched scan This commit adds the support to specify the RSSI thresholds per band for each match set. This enhances the current behavior which specifies a single rssi_threshold across all the bands by introducing the rssi_threshold_per_band. These per band rssi thresholds are referred through NL80211_BAND_* (enum nl80211_band) variables as attribute types. Such attributes/values per each band are nested through NL80211_ATTR_SCHED_SCAN_MIN_RSSI. These band specific rssi thresholds shall take precedence over the current rssi_thold per match set. Drivers indicate this support through %NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD. These per band rssi attributes/values does not specify "default RSSI filter" as done by NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to stay backward compatible. That said, these per band rssi values have to be specified for the corresponding matchset. Signed-off-by: vamsi krishna Signed-off-by: Srinivas Dasari [rebase on refactoring, add policy] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 8 +++++++ include/uapi/linux/nl80211.h | 13 +++++++++++ net/wireless/nl80211.c | 53 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 74 insertions(+) (limited to 'net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index bb307a11ee63..b13234a486e7 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1832,11 +1832,19 @@ static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask) * @bssid: BSSID to be matched; may be all-zero BSSID in case of SSID match * or no match (RSSI only) * @rssi_thold: don't report scan results below this threshold (in s32 dBm) + * @per_band_rssi_thold: Minimum rssi threshold for each band to be applied + * for filtering out scan results received. Drivers advertize this support + * of band specific rssi based filtering through the feature capability + * %NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD. These band + * specific rssi thresholds take precedence over rssi_thold, if specified. + * If not specified for any band, it will be assigned with rssi_thold of + * corresponding matchset. */ struct cfg80211_match_set { struct cfg80211_ssid ssid; u8 bssid[ETH_ALEN]; s32 rssi_thold; + s32 per_band_rssi_thold[NUM_NL80211_BANDS]; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index dd4f86ee286e..4a9404958fbe 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3638,6 +3638,14 @@ enum nl80211_reg_rule_attr { * value as specified by &struct nl80211_bss_select_rssi_adjust. * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching * (this cannot be used together with SSID). + * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the + * band specific minimum rssi thresholds for the bands defined in + * enum nl80211_band. The minimum rssi threshold value(s32) specific to a + * band shall be encapsulated in attribute with type value equals to one + * of the NL80211_BAND_* defined in enum nl80211_band. For example, the + * minimum rssi threshold value for 2.4GHZ band shall be encapsulated + * within an attribute of type NL80211_BAND_2GHZ. And one or more of such + * attributes will be nested within this attribute. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -3650,6 +3658,7 @@ enum nl80211_sched_scan_match_attr { NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, + NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -5343,6 +5352,9 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching * (set/del PMKSA operations) in AP mode. * + * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports + * filtering of sched scan results using band specific RSSI thresholds. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5384,6 +5396,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, NL80211_EXT_FEATURE_AP_PMKSA_CACHING, + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 5c49d11fc477..62f96d6c02f0 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -617,12 +617,21 @@ nl80211_rekey_policy[NUM_NL80211_REKEY_DATA] = { [NL80211_REKEY_DATA_REPLAY_CTR] = { .len = NL80211_REPLAY_CTR_LEN }, }; +static const struct nla_policy +nl80211_match_band_rssi_policy[NUM_NL80211_BANDS] = { + [NL80211_BAND_2GHZ] = { .type = NLA_S32 }, + [NL80211_BAND_5GHZ] = { .type = NLA_S32 }, + [NL80211_BAND_60GHZ] = { .type = NLA_S32 }, +}; + static const struct nla_policy nl80211_match_policy[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1] = { [NL80211_SCHED_SCAN_MATCH_ATTR_SSID] = { .type = NLA_BINARY, .len = IEEE80211_MAX_SSID_LEN }, [NL80211_SCHED_SCAN_MATCH_ATTR_BSSID] = { .len = ETH_ALEN }, [NL80211_SCHED_SCAN_MATCH_ATTR_RSSI] = { .type = NLA_U32 }, + [NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI] = + NLA_POLICY_NESTED(nl80211_match_band_rssi_policy), }; static const struct nla_policy @@ -7537,6 +7546,41 @@ nl80211_parse_sched_scan_plans(struct wiphy *wiphy, int n_plans, return 0; } +static int +nl80211_parse_sched_scan_per_band_rssi(struct wiphy *wiphy, + struct cfg80211_match_set *match_sets, + struct nlattr *tb_band_rssi, + s32 rssi_thold) +{ + struct nlattr *attr; + int i, tmp, ret = 0; + + if (!wiphy_ext_feature_isset(wiphy, + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD)) { + if (tb_band_rssi) + ret = -EOPNOTSUPP; + else + for (i = 0; i < NUM_NL80211_BANDS; i++) + match_sets->per_band_rssi_thold[i] = + NL80211_SCAN_RSSI_THOLD_OFF; + return ret; + } + + for (i = 0; i < NUM_NL80211_BANDS; i++) + match_sets->per_band_rssi_thold[i] = rssi_thold; + + nla_for_each_nested(attr, tb_band_rssi, tmp) { + enum nl80211_band band = nla_type(attr); + + if (band < 0 || band >= NUM_NL80211_BANDS) + return -EINVAL; + + match_sets->per_band_rssi_thold[band] = nla_get_s32(attr); + } + + return 0; +} + static struct cfg80211_sched_scan_request * nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev, struct nlattr **attrs, int max_match_sets) @@ -7816,6 +7860,15 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev, if (rssi) request->match_sets[i].rssi_thold = nla_get_s32(rssi); + + /* Parse per band RSSI attribute */ + err = nl80211_parse_sched_scan_per_band_rssi(wiphy, + &request->match_sets[i], + tb[NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI], + request->match_sets[i].rssi_thold); + if (err) + goto out_free; + i++; } -- cgit v1.2.3 From ab60633c7136c300f15a390f3469d7c4be15a055 Mon Sep 17 00:00:00 2001 From: Narayanraddi Masti Date: Thu, 7 Feb 2019 12:16:05 -0800 Subject: mac80211: Add support for NL80211_STA_INFO_AIRTIME_LINK_METRIC Add support for mesh airtime link metric attribute NL80211_STA_INFO_AIRTIME_LINK_METRIC. Signed-off-by: Narayanraddi Masti Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 3 +++ include/uapi/linux/nl80211.h | 2 ++ net/mac80211/mesh.h | 2 ++ net/mac80211/mesh_hwmp.c | 4 ++-- net/mac80211/sta_info.c | 6 ++++++ net/wireless/nl80211.c | 1 + 6 files changed, 16 insertions(+), 2 deletions(-) (limited to 'net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index b13234a486e7..5859a5e02454 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1327,6 +1327,7 @@ struct cfg80211_tid_stats { * @fcs_err_count: number of packets (MPDUs) received from this station with * an FCS error. This counter should be incremented only when TA of the * received packet with an FCS error matches the peer MAC address. + * @airtime_link_metric: mesh airtime link metric. */ struct station_info { u64 filled; @@ -1381,6 +1382,8 @@ struct station_info { u32 rx_mpdu_count; u32 fcs_err_count; + + u32 airtime_link_metric; }; #if IS_ENABLED(CONFIG_CFG80211) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 4a9404958fbe..07457f4aea00 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3139,6 +3139,7 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames * sent to the station (u64, usec) * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) + * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -3184,6 +3185,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_CONNECTED_TO_GATE, NL80211_STA_INFO_TX_DURATION, NL80211_STA_INFO_AIRTIME_WEIGHT, + NL80211_STA_INFO_AIRTIME_LINK_METRIC, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 574c3891c4b2..88535a2e62bc 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -278,6 +278,8 @@ mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst); int mesh_path_add_gate(struct mesh_path *mpath); int mesh_path_send_to_gates(struct mesh_path *mpath); int mesh_gate_num(struct ieee80211_sub_if_data *sdata); +u32 airtime_link_metric_get(struct ieee80211_local *local, + struct sta_info *sta); /* Mesh plinks */ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index f7517668e77a..c694c0dd907e 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -318,8 +318,8 @@ void ieee80211s_update_metric(struct ieee80211_local *local, cfg80211_calculate_bitrate(&rinfo)); } -static u32 airtime_link_metric_get(struct ieee80211_local *local, - struct sta_info *sta) +u32 airtime_link_metric_get(struct ieee80211_local *local, + struct sta_info *sta) { /* This should be adjusted for each device */ int device_constant = 1 << ARITH_SHIFT; diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 11f058987a54..a81e1279a76d 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -2373,6 +2373,12 @@ void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo, sinfo->filled |= BIT_ULL(NL80211_STA_INFO_ACK_SIGNAL_AVG); } + + if (ieee80211_vif_is_mesh(&sdata->vif)) { + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_AIRTIME_LINK_METRIC); + sinfo->airtime_link_metric = + airtime_link_metric_get(local, sta); + } } u32 sta_get_expected_throughput(struct sta_info *sta) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 62f96d6c02f0..7556c0479b3c 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4898,6 +4898,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 cmd, u32 portid, PUT_SINFO(TX_RETRIES, tx_retries, u32); PUT_SINFO(TX_FAILED, tx_failed, u32); PUT_SINFO(EXPECTED_THROUGHPUT, expected_throughput, u32); + PUT_SINFO(AIRTIME_LINK_METRIC, airtime_link_metric, u32); PUT_SINFO(BEACON_LOSS, beacon_loss_count, u32); PUT_SINFO(LOCAL_PM, local_pm, u32); PUT_SINFO(PEER_PM, peer_pm, u32); -- cgit v1.2.3 From cb74e9775871f8c82a1297cf76209f10ab5bbe3d Mon Sep 17 00:00:00 2001 From: Sunil Dutt Date: Wed, 20 Feb 2019 16:18:07 +0530 Subject: cfg80211/nl80211: Offload OWE processing to user space in AP mode This interface allows the host driver to offload OWE processing to user space. This intends to support OWE (Opportunistic Wireless Encryption) AKM by the drivers that implement SME but rely on the user space for the cryptographic/OWE processing in AP mode. Such drivers are not capable of processing/deriving the DH IE. A new NL80211 command - NL80211_CMD_UPDATE_OWE_INFO is introduced to send the request/event between the host driver and user space. Driver shall provide the OWE info (MAC address and DH IE) of the peer to user space for cryptographic processing of the DH IE through the event. Accordingly, the user space shall update the OWE info/DH IE to the driver. Following is the sequence in AP mode for OWE authentication. Driver passes the OWE info obtained from the peer in the Association Request to the user space through the event cfg80211_update_owe_info_event. User space shall process the OWE info received and generate new OWE info. This OWE info is passed to the driver through NL80211_CMD_UPDATE_OWE_INFO request. Driver eventually uses this OWE info to send the Association Response to the peer. This OWE info in the command interface carries the IEs that include PMKID of the peer if the PMKSA is still valid or an updated DH IE for generating a new PMKSA with the peer. Signed-off-by: Liangwei Dong Signed-off-by: Sunil Dutt Signed-off-by: Srinivas Dasari [remove policy initialization - no longer exists] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 42 ++++++++++++++++++++++++++ include/uapi/linux/nl80211.h | 7 +++++ net/wireless/nl80211.c | 72 ++++++++++++++++++++++++++++++++++++++++++++ net/wireless/rdev-ops.h | 13 ++++++++ net/wireless/trace.h | 38 +++++++++++++++++++++++ 5 files changed, 172 insertions(+) (limited to 'net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5859a5e02454..70432fd638af 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3110,6 +3110,32 @@ struct cfg80211_pmsr_request { struct cfg80211_pmsr_request_peer peers[]; }; +/** + * struct cfg80211_update_owe_info - OWE Information + * + * This structure provides information needed for the drivers to offload OWE + * (Opportunistic Wireless Encryption) processing to the user space. + * + * Commonly used across update_owe_info request and event interfaces. + * + * @peer: MAC address of the peer device for which the OWE processing + * has to be done. + * @status: status code, %WLAN_STATUS_SUCCESS for successful OWE info + * processing, use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space + * cannot give you the real status code for failures. Used only for + * OWE update request command interface (user space to driver). + * @ie: IEs obtained from the peer or constructed by the user space. These are + * the IEs of the remote peer in the event from the host driver and + * the constructed IEs by the user space in the request interface. + * @ie_len: Length of IEs in octets. + */ +struct cfg80211_update_owe_info { + u8 peer[ETH_ALEN] __aligned(2); + u16 status; + const u8 *ie; + size_t ie_len; +}; + /** * struct cfg80211_ops - backend description for wireless configuration * @@ -3447,6 +3473,10 @@ struct cfg80211_pmsr_request { * Statistics should be cumulative, currently no way to reset is provided. * @start_pmsr: start peer measurement (e.g. FTM) * @abort_pmsr: abort peer measurement + * + * @update_owe_info: Provide updated OWE info to driver. Driver implementing SME + * but offloading OWE processing to the user space will get the updated + * DH IE through this interface. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -3761,6 +3791,8 @@ struct cfg80211_ops { struct cfg80211_pmsr_request *request); void (*abort_pmsr)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_pmsr_request *request); + int (*update_owe_info)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_update_owe_info *owe_info); }; /* @@ -7219,4 +7251,14 @@ void cfg80211_pmsr_complete(struct wireless_dev *wdev, #define wiphy_WARN(wiphy, format, args...) \ WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args); +/** + * cfg80211_update_owe_info_event - Notify the peer's OWE info to user space + * @netdev: network device + * @owe_info: peer's owe info + * @gfp: allocation flags + */ +void cfg80211_update_owe_info_event(struct net_device *netdev, + struct cfg80211_update_owe_info *owe_info, + gfp_t gfp); + #endif /* __NET_CFG80211_H */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 07457f4aea00..a99d75bef598 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1065,6 +1065,11 @@ * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes * determining the width and type. * + * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to + * offload OWE processing to user space. This intends to support + * OWE AKM by the host drivers that implement SME but rely + * on the user space for the cryptographic/DH IE processing in AP mode. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1285,6 +1290,8 @@ enum nl80211_commands { NL80211_CMD_NOTIFY_RADAR, + NL80211_CMD_UPDATE_OWE_INFO, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7556c0479b3c..0124bab1f8a7 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -13316,6 +13316,31 @@ nla_put_failure: return -ENOBUFS; } +static int nl80211_update_owe_info(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct cfg80211_update_owe_info owe_info; + struct net_device *dev = info->user_ptr[1]; + + if (!rdev->ops->update_owe_info) + return -EOPNOTSUPP; + + if (!info->attrs[NL80211_ATTR_STATUS_CODE] || + !info->attrs[NL80211_ATTR_MAC]) + return -EINVAL; + + memset(&owe_info, 0, sizeof(owe_info)); + owe_info.status = nla_get_u16(info->attrs[NL80211_ATTR_STATUS_CODE]); + nla_memcpy(owe_info.peer, info->attrs[NL80211_ATTR_MAC], ETH_ALEN); + + if (info->attrs[NL80211_ATTR_IE]) { + owe_info.ie = nla_data(info->attrs[NL80211_ATTR_IE]); + owe_info.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]); + } + + return rdev_update_owe_info(rdev, dev, &owe_info); +} + #define NL80211_FLAG_NEED_WIPHY 0x01 #define NL80211_FLAG_NEED_NETDEV 0x02 #define NL80211_FLAG_NEED_RTNL 0x04 @@ -14146,6 +14171,13 @@ static const struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_UPDATE_OWE_INFO, + .doit = nl80211_update_owe_info, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_family nl80211_fam __ro_after_init = { @@ -16318,6 +16350,46 @@ int cfg80211_external_auth_request(struct net_device *dev, } EXPORT_SYMBOL(cfg80211_external_auth_request); +void cfg80211_update_owe_info_event(struct net_device *netdev, + struct cfg80211_update_owe_info *owe_info, + gfp_t gfp) +{ + struct wiphy *wiphy = netdev->ieee80211_ptr->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); + struct sk_buff *msg; + void *hdr; + + trace_cfg80211_update_owe_info_event(wiphy, netdev, owe_info); + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp); + if (!msg) + return; + + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_UPDATE_OWE_INFO); + if (!hdr) + goto nla_put_failure; + + if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || + nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) || + nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, owe_info->peer)) + goto nla_put_failure; + + if (!owe_info->ie_len || + nla_put(msg, NL80211_ATTR_IE, owe_info->ie_len, owe_info->ie)) + goto nla_put_failure; + + genlmsg_end(msg, hdr); + + genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0, + NL80211_MCGRP_MLME, gfp); + return; + +nla_put_failure: + genlmsg_cancel(msg, hdr); + nlmsg_free(msg); +} +EXPORT_SYMBOL(cfg80211_update_owe_info_event); + /* initialisation/exit functions */ int __init nl80211_init(void) diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index 5cb48d135fab..c1e3210b09e6 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -1272,4 +1272,17 @@ rdev_abort_pmsr(struct cfg80211_registered_device *rdev, trace_rdev_return_void(&rdev->wiphy); } +static inline int rdev_update_owe_info(struct cfg80211_registered_device *rdev, + struct net_device *dev, + struct cfg80211_update_owe_info *oweinfo) +{ + int ret = -EOPNOTSUPP; + + trace_rdev_update_owe_info(&rdev->wiphy, dev, oweinfo); + if (rdev->ops->update_owe_info) + ret = rdev->ops->update_owe_info(&rdev->wiphy, dev, oweinfo); + trace_rdev_return_int(&rdev->wiphy, ret); + return ret; +} + #endif /* __CFG80211_RDEV_OPS */ diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 44b2ce1bb13a..2dda5291fc01 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -3362,6 +3362,44 @@ TRACE_EVENT(cfg80211_pmsr_complete, WIPHY_PR_ARG, WDEV_PR_ARG, (unsigned long long)__entry->cookie) ); + +TRACE_EVENT(rdev_update_owe_info, + TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, + struct cfg80211_update_owe_info *owe_info), + TP_ARGS(wiphy, netdev, owe_info), + TP_STRUCT__entry(WIPHY_ENTRY + NETDEV_ENTRY + MAC_ENTRY(peer) + __field(u16, status) + __dynamic_array(u8, ie, owe_info->ie_len)), + TP_fast_assign(WIPHY_ASSIGN; + NETDEV_ASSIGN; + MAC_ASSIGN(peer, owe_info->peer); + __entry->status = owe_info->status; + memcpy(__get_dynamic_array(ie), + owe_info->ie, owe_info->ie_len);), + TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", peer: " MAC_PR_FMT + " status %d", WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer), + __entry->status) +); + +TRACE_EVENT(cfg80211_update_owe_info_event, + TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, + struct cfg80211_update_owe_info *owe_info), + TP_ARGS(wiphy, netdev, owe_info), + TP_STRUCT__entry(WIPHY_ENTRY + NETDEV_ENTRY + MAC_ENTRY(peer) + __dynamic_array(u8, ie, owe_info->ie_len)), + TP_fast_assign(WIPHY_ASSIGN; + NETDEV_ASSIGN; + MAC_ASSIGN(peer, owe_info->peer); + memcpy(__get_dynamic_array(ie), owe_info->ie, + owe_info->ie_len);), + TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", peer: " MAC_PR_FMT, + WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer)) +); + #endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */ #undef TRACE_INCLUDE_PATH -- cgit v1.2.3 From 5bd9d1082d3be32f08c0f7b3f656c0562d7667e2 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Fri, 15 Mar 2019 17:39:02 +0200 Subject: cfg80211: don't skip multi-bssid index element When creating the IEs for the nontransmitted BSS, the index element is skipped. However, we need to get DTIM values from it, so don't skip it. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- net/wireless/scan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'net') diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 287518c6caa4..49f700a1460b 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -269,8 +269,7 @@ static size_t cfg80211_gen_new_ie(const u8 *ie, size_t ielen, tmp_new = sub_copy; while (tmp_new + tmp_new[1] + 2 - sub_copy <= subie_len) { if (!(tmp_new[0] == WLAN_EID_NON_TX_BSSID_CAP || - tmp_new[0] == WLAN_EID_SSID || - tmp_new[0] == WLAN_EID_MULTI_BSSID_IDX)) { + tmp_new[0] == WLAN_EID_SSID)) { memcpy(pos, tmp_new, tmp_new[1] + 2); pos += tmp_new[1] + 2; } -- cgit v1.2.3 From f7dacfb11475ba777e1e84ccec2e14b0ba5a17a3 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Fri, 15 Mar 2019 17:39:03 +0200 Subject: cfg80211: support non-inheritance element Subelement profile may specify element IDs it doesn't inherit from the management frame. Support it. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 1 + include/net/cfg80211.h | 8 +++++++ net/wireless/scan.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 69 insertions(+), 1 deletion(-) (limited to 'net') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 48703ec60d06..522881f31938 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -2487,6 +2487,7 @@ enum ieee80211_eid_ext { WLAN_EID_EXT_HE_MU_EDCA = 38, WLAN_EID_EXT_MAX_CHANNEL_SWITCH_TIME = 52, WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION = 55, + WLAN_EID_EXT_NON_INHERITANCE = 56, }; /* Action category code */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 70432fd638af..777c4f021610 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -5534,6 +5534,14 @@ static inline void cfg80211_gen_new_bssid(const u8 *bssid, u8 max_bssid, u64_to_ether_addr(new_bssid_u64, new_bssid); } +/** + * cfg80211_is_element_inherited - returns if element ID should be inherited + * @element: element to check + * @non_inherit_element: non inheritance element + */ +bool cfg80211_is_element_inherited(const struct element *element, + const struct element *non_inherit_element); + /** * enum cfg80211_bss_frame_type - frame type that the BSS data came from * @CFG80211_BSS_FTYPE_UNKNOWN: driver doesn't know whether the data is diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 49f700a1460b..bda9114ded77 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -179,12 +179,63 @@ static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *rdev, return true; } +bool cfg80211_is_element_inherited(const struct element *elem, + const struct element *non_inherit_elem) +{ + u8 id_len, ext_id_len, i, loop_len, id; + const u8 *list; + + if (elem->id == WLAN_EID_MULTIPLE_BSSID) + return false; + + if (!non_inherit_elem || non_inherit_elem->datalen < 2) + return true; + + /* + * non inheritance element format is: + * ext ID (56) | IDs list len | list | extension IDs list len | list + * Both lists are optional. Both lengths are mandatory. + * This means valid length is: + * elem_len = 1 (extension ID) + 2 (list len fields) + list lengths + */ + id_len = non_inherit_elem->data[1]; + if (non_inherit_elem->datalen < 3 + id_len) + return true; + + ext_id_len = non_inherit_elem->data[2 + id_len]; + if (non_inherit_elem->datalen < 3 + id_len + ext_id_len) + return true; + + if (elem->id == WLAN_EID_EXTENSION) { + if (!ext_id_len) + return true; + loop_len = ext_id_len; + list = &non_inherit_elem->data[3 + id_len]; + id = elem->data[0]; + } else { + if (!id_len) + return true; + loop_len = id_len; + list = &non_inherit_elem->data[2]; + id = elem->id; + } + + for (i = 0; i < loop_len; i++) { + if (list[i] == id) + return false; + } + + return true; +} +EXPORT_SYMBOL(cfg80211_is_element_inherited); + static size_t cfg80211_gen_new_ie(const u8 *ie, size_t ielen, const u8 *subelement, size_t subie_len, u8 *new_ie, gfp_t gfp) { u8 *pos, *tmp; const u8 *tmp_old, *tmp_new; + const struct element *non_inherit_elem; u8 *sub_copy; /* copy subelement as we need to change its content to @@ -204,6 +255,11 @@ static size_t cfg80211_gen_new_ie(const u8 *ie, size_t ielen, pos += (tmp_new[1] + 2); } + /* get non inheritance list if exists */ + non_inherit_elem = + cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, + sub_copy, subie_len); + /* go through IEs in ie (skip SSID) and subelement, * merge them into new_ie */ @@ -224,8 +280,11 @@ static size_t cfg80211_gen_new_ie(const u8 *ie, size_t ielen, subie_len); if (!tmp) { + const struct element *old_elem = (void *)tmp_old; + /* ie in old ie but not in subelement */ - if (tmp_old[0] != WLAN_EID_MULTIPLE_BSSID) { + if (cfg80211_is_element_inherited(old_elem, + non_inherit_elem)) { memcpy(pos, tmp_old, tmp_old[1] + 2); pos += tmp_old[1] + 2; } -- cgit v1.2.3 From 671042a4fb77e0a0c2db595fd8e5ef5f7ba75bbe Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Fri, 15 Mar 2019 17:39:04 +0200 Subject: mac80211: support non-inheritance element Subelement profile may specify element IDs it doesn't inherit from the management frame. Support it. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- net/mac80211/util.c | 134 ++++++++++++++++++++++++++++++---------------------- 1 file changed, 77 insertions(+), 57 deletions(-) (limited to 'net') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 4c1655972565..08197afdb7b3 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -894,10 +894,10 @@ EXPORT_SYMBOL(ieee80211_queue_delayed_work); static u32 _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, struct ieee802_11_elems *elems, - u64 filter, u32 crc, u8 *transmitter_bssid, - u8 *bss_bssid) + u64 filter, u32 crc, + const struct element *check_inherit) { - const struct element *elem, *sub; + const struct element *elem; bool calc_crc = filter != 0; DECLARE_BITMAP(seen_elems, 256); const u8 *ie; @@ -910,6 +910,11 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, u8 elen = elem->datalen; const u8 *pos = elem->data; + if (check_inherit && + !cfg80211_is_element_inherited(elem, + check_inherit)) + continue; + switch (id) { case WLAN_EID_SSID: case WLAN_EID_SUPP_RATES: @@ -1208,57 +1213,6 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, if (elen >= sizeof(*elems->max_idle_period_ie)) elems->max_idle_period_ie = (void *)pos; break; - case WLAN_EID_MULTIPLE_BSSID: - if (!bss_bssid || !transmitter_bssid || elen < 4) - break; - - elems->max_bssid_indicator = pos[0]; - - for_each_element(sub, pos + 1, elen - 1) { - u8 sub_len = sub->datalen; - u8 new_bssid[ETH_ALEN]; - const u8 *index; - - /* - * we only expect the "non-transmitted BSSID - * profile" subelement (subelement id 0) - */ - if (sub->id != 0 || sub->datalen < 4) { - /* not a valid BSS profile */ - continue; - } - - if (sub->data[0] != WLAN_EID_NON_TX_BSSID_CAP || - sub->data[1] != 2) { - /* The first element of the - * Nontransmitted BSSID Profile is not - * the Nontransmitted BSSID Capability - * element. - */ - continue; - } - - /* found a Nontransmitted BSSID Profile */ - index = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, - sub->data, sub_len); - if (!index || index[1] < 1 || index[2] == 0) { - /* Invalid MBSSID Index element */ - continue; - } - - cfg80211_gen_new_bssid(transmitter_bssid, - pos[0], - index[2], - new_bssid); - if (ether_addr_equal(new_bssid, bss_bssid)) { - elems->nontransmitted_bssid_profile = - (void *)sub; - elems->bssid_index_len = index[1]; - elems->bssid_index = (void *)&index[2]; - break; - } - } - break; case WLAN_EID_EXTENSION: if (pos[0] == WLAN_EID_EXT_HE_MU_EDCA && elen >= (sizeof(*elems->mu_edca_param_set) + 1)) { @@ -1300,25 +1254,91 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, return crc; } +static void ieee802_11_find_bssid_profile(const u8 *start, size_t len, + struct ieee802_11_elems *elems, + u8 *transmitter_bssid, + u8 *bss_bssid) +{ + const struct element *elem, *sub; + + if (!bss_bssid || !transmitter_bssid) + return; + + for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, start, len) { + if (elem->datalen < 2) + continue; + + for_each_element(sub, elem->data + 1, elem->datalen - 1) { + u8 new_bssid[ETH_ALEN]; + const u8 *index; + + if (sub->id != 0 || sub->datalen < 4) { + /* not a valid BSS profile */ + continue; + } + + if (sub->data[0] != WLAN_EID_NON_TX_BSSID_CAP || + sub->data[1] != 2) { + /* The first element of the + * Nontransmitted BSSID Profile is not + * the Nontransmitted BSSID Capability + * element. + */ + continue; + } + + /* found a Nontransmitted BSSID Profile */ + index = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, + sub->data, sub->datalen); + if (!index || index[1] < 1 || index[2] == 0) { + /* Invalid MBSSID Index element */ + continue; + } + + cfg80211_gen_new_bssid(transmitter_bssid, + elem->data[0], + index[2], + new_bssid); + if (ether_addr_equal(new_bssid, bss_bssid)) { + elems->nontransmitted_bssid_profile = + elem->data; + elems->bssid_index_len = index[1]; + elems->bssid_index = (void *)&index[2]; + break; + } + } + } +} + u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, struct ieee802_11_elems *elems, u64 filter, u32 crc, u8 *transmitter_bssid, u8 *bss_bssid) { + const struct element *non_inherit = NULL; + memset(elems, 0, sizeof(*elems)); elems->ie_start = start; elems->total_len = len; + ieee802_11_find_bssid_profile(start, len, elems, transmitter_bssid, + bss_bssid); + + if (elems->nontransmitted_bssid_profile) + non_inherit = + cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, + &elems->nontransmitted_bssid_profile[2], + elems->nontransmitted_bssid_profile[1]); + crc = _ieee802_11_parse_elems_crc(start, len, action, elems, filter, - crc, transmitter_bssid, bss_bssid); + crc, non_inherit); /* Override with nontransmitted profile, if found */ if (transmitter_bssid && elems->nontransmitted_bssid_profile) { const u8 *profile = elems->nontransmitted_bssid_profile; _ieee802_11_parse_elems_crc(&profile[2], profile[1], - action, elems, 0, 0, - transmitter_bssid, bss_bssid); + action, elems, 0, 0, NULL); } if (elems->tim && !elems->parse_error) { -- cgit v1.2.3 From fe806e4992c9047affd263bcc13b2c047029a726 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Fri, 15 Mar 2019 17:39:05 +0200 Subject: cfg80211: support profile split between elements Since an element is limited to 255 octets, a profile may be split split to several elements. Support the split as defined in the 11ax draft 3. Detect legacy split and print a net-rate limited warning, since there is no ROI in supporting this probably non-existent split. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 14 +++++++ net/wireless/scan.c | 109 ++++++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 117 insertions(+), 6 deletions(-) (limited to 'net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 777c4f021610..f6665f8eba5a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -5542,6 +5542,20 @@ static inline void cfg80211_gen_new_bssid(const u8 *bssid, u8 max_bssid, bool cfg80211_is_element_inherited(const struct element *element, const struct element *non_inherit_element); +/** + * cfg80211_merge_profile - merges a MBSSID profile if it is split between IEs + * @ie: ies + * @ielen: length of IEs + * @mbssid_elem: current MBSSID element + * @sub_elem: current MBSSID subelement (profile) + * @merged_ie: location of the merged profile + * @max_copy_len: max merged profile length + */ +size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, + const struct element *mbssid_elem, + const struct element *sub_elem, + u8 **merged_ie, size_t max_copy_len); + /** * enum cfg80211_bss_frame_type - frame type that the BSS data came from * @CFG80211_BSS_FTYPE_UNKNOWN: driver doesn't know whether the data is diff --git a/net/wireless/scan.c b/net/wireless/scan.c index bda9114ded77..878c867f3f7d 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1456,6 +1456,78 @@ cfg80211_inform_single_bss_data(struct wiphy *wiphy, return &res->pub; } +static const struct element +*cfg80211_get_profile_continuation(const u8 *ie, size_t ielen, + const struct element *mbssid_elem, + const struct element *sub_elem) +{ + const u8 *mbssid_end = mbssid_elem->data + mbssid_elem->datalen; + const struct element *next_mbssid; + const struct element *next_sub; + + next_mbssid = cfg80211_find_elem(WLAN_EID_MULTIPLE_BSSID, + mbssid_end, + ielen - (mbssid_end - ie)); + + /* + * If is is not the last subelement in current MBSSID IE or there isn't + * a next MBSSID IE - profile is complete. + */ + if ((sub_elem->data + sub_elem->datalen < mbssid_end - 1) || + !next_mbssid) + return NULL; + + /* For any length error, just return NULL */ + + if (next_mbssid->datalen < 4) + return NULL; + + next_sub = (void *)&next_mbssid->data[1]; + + if (next_mbssid->data + next_mbssid->datalen < + next_sub->data + next_sub->datalen) + return NULL; + + if (next_sub->id != 0 || next_sub->datalen < 2) + return NULL; + + /* + * Check if the first element in the next sub element is a start + * of a new profile + */ + return next_sub->data[0] == WLAN_EID_NON_TX_BSSID_CAP ? + NULL : next_mbssid; +} + +size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, + const struct element *mbssid_elem, + const struct element *sub_elem, + u8 **merged_ie, size_t max_copy_len) +{ + size_t copied_len = sub_elem->datalen; + const struct element *next_mbssid; + + if (sub_elem->datalen > max_copy_len) + return 0; + + memcpy(*merged_ie, sub_elem->data, sub_elem->datalen); + + while ((next_mbssid = cfg80211_get_profile_continuation(ie, ielen, + mbssid_elem, + sub_elem))) { + const struct element *next_sub = (void *)&next_mbssid->data[1]; + + if (copied_len + next_sub->datalen > max_copy_len) + break; + memcpy(*merged_ie + copied_len, next_sub->data, + next_sub->datalen); + copied_len += next_sub->datalen; + } + + return copied_len; +} +EXPORT_SYMBOL(cfg80211_merge_profile); + static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, struct cfg80211_inform_bss *data, enum cfg80211_bss_frame_type ftype, @@ -1469,7 +1541,8 @@ static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, const struct element *elem, *sub; size_t new_ie_len; u8 new_bssid[ETH_ALEN]; - u8 *new_ie; + u8 *new_ie, *profile; + u64 seen_indices = 0; u16 capability; struct cfg80211_bss *bss; @@ -1487,10 +1560,16 @@ static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, if (!new_ie) return; + profile = kmalloc(ielen, gfp); + if (!profile) + goto out; + for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, ie, ielen) { if (elem->datalen < 4) continue; for_each_element(sub, elem->data + 1, elem->datalen - 1) { + u8 profile_len; + if (sub->id != 0 || sub->datalen < 4) { /* not a valid BSS profile */ continue; @@ -1505,16 +1584,31 @@ static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, continue; } + memset(profile, 0, ielen); + profile_len = cfg80211_merge_profile(ie, ielen, + elem, + sub, + &profile, + ielen); + /* found a Nontransmitted BSSID Profile */ mbssid_index_ie = cfg80211_find_ie (WLAN_EID_MULTI_BSSID_IDX, - sub->data, sub->datalen); + profile, profile_len); if (!mbssid_index_ie || mbssid_index_ie[1] < 1 || - mbssid_index_ie[2] == 0) { + mbssid_index_ie[2] == 0 || + mbssid_index_ie[2] > 46) { /* No valid Multiple BSSID-Index element */ continue; } + if (seen_indices & BIT(mbssid_index_ie[2])) + /* We don't support legacy split of a profile */ + net_dbg_ratelimited("Partial info for BSSID index %d\n", + mbssid_index_ie[2]); + + seen_indices |= BIT(mbssid_index_ie[2]); + non_tx_data->bssid_index = mbssid_index_ie[2]; non_tx_data->max_bssid_indicator = elem->data[0]; @@ -1523,13 +1617,14 @@ static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, non_tx_data->bssid_index, new_bssid); memset(new_ie, 0, IEEE80211_MAX_DATA_LEN); - new_ie_len = cfg80211_gen_new_ie(ie, ielen, sub->data, - sub->datalen, new_ie, + new_ie_len = cfg80211_gen_new_ie(ie, ielen, + profile, + profile_len, new_ie, gfp); if (!new_ie_len) continue; - capability = get_unaligned_le16(sub->data + 2); + capability = get_unaligned_le16(profile + 2); bss = cfg80211_inform_single_bss_data(wiphy, data, ftype, new_bssid, tsf, @@ -1545,7 +1640,9 @@ static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, } } +out: kfree(new_ie); + kfree(profile); } struct cfg80211_bss * -- cgit v1.2.3 From 5023b14cf4df4d22e1a80738167f3438c9e62e5f Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Fri, 15 Mar 2019 17:39:06 +0200 Subject: mac80211: support profile split between elements Since an element is limited to 255 octets, a profile may be split split to several elements. Support the split as defined in the 11ax draft 3. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 1 - net/mac80211/util.c | 56 ++++++++++++++++++++++++++++++---------------- 2 files changed, 37 insertions(+), 20 deletions(-) (limited to 'net') diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index e170f986d226..c5708f8a7401 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1505,7 +1505,6 @@ struct ieee802_11_elems { const struct ieee80211_bss_max_idle_period_ie *max_idle_period_ie; const struct ieee80211_multiple_bssid_configuration *mbssid_config_ie; const struct ieee80211_bssid_index *bssid_index; - const u8 *nontransmitted_bssid_profile; u8 max_bssid_indicator; u8 dtim_count; u8 dtim_period; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 08197afdb7b3..99dd58454592 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1254,15 +1254,18 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, return crc; } -static void ieee802_11_find_bssid_profile(const u8 *start, size_t len, - struct ieee802_11_elems *elems, - u8 *transmitter_bssid, - u8 *bss_bssid) +static size_t ieee802_11_find_bssid_profile(const u8 *start, size_t len, + struct ieee802_11_elems *elems, + u8 *transmitter_bssid, + u8 *bss_bssid, + u8 **nontransmitted_profile) { const struct element *elem, *sub; + size_t profile_len = 0; + bool found = false; if (!bss_bssid || !transmitter_bssid) - return; + return profile_len; for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, start, len) { if (elem->datalen < 2) @@ -1287,9 +1290,17 @@ static void ieee802_11_find_bssid_profile(const u8 *start, size_t len, continue; } + memset(*nontransmitted_profile, 0, len); + profile_len = cfg80211_merge_profile(start, len, + elem, + sub, + nontransmitted_profile, + len); + /* found a Nontransmitted BSSID Profile */ index = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, - sub->data, sub->datalen); + *nontransmitted_profile, + profile_len); if (!index || index[1] < 1 || index[2] == 0) { /* Invalid MBSSID Index element */ continue; @@ -1300,14 +1311,15 @@ static void ieee802_11_find_bssid_profile(const u8 *start, size_t len, index[2], new_bssid); if (ether_addr_equal(new_bssid, bss_bssid)) { - elems->nontransmitted_bssid_profile = - elem->data; + found = true; elems->bssid_index_len = index[1]; elems->bssid_index = (void *)&index[2]; break; } } } + + return found ? profile_len : 0; } u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, @@ -1316,30 +1328,34 @@ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, u8 *bss_bssid) { const struct element *non_inherit = NULL; + u8 *nontransmitted_profile; + int nontransmitted_profile_len = 0; memset(elems, 0, sizeof(*elems)); elems->ie_start = start; elems->total_len = len; - ieee802_11_find_bssid_profile(start, len, elems, transmitter_bssid, - bss_bssid); - - if (elems->nontransmitted_bssid_profile) + nontransmitted_profile = kmalloc(len, GFP_ATOMIC); + if (nontransmitted_profile) { + nontransmitted_profile_len = + ieee802_11_find_bssid_profile(start, len, elems, + transmitter_bssid, + bss_bssid, + &nontransmitted_profile); non_inherit = cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, - &elems->nontransmitted_bssid_profile[2], - elems->nontransmitted_bssid_profile[1]); + nontransmitted_profile, + nontransmitted_profile_len); + } crc = _ieee802_11_parse_elems_crc(start, len, action, elems, filter, crc, non_inherit); /* Override with nontransmitted profile, if found */ - if (transmitter_bssid && elems->nontransmitted_bssid_profile) { - const u8 *profile = elems->nontransmitted_bssid_profile; - - _ieee802_11_parse_elems_crc(&profile[2], profile[1], + if (nontransmitted_profile_len) + _ieee802_11_parse_elems_crc(nontransmitted_profile, + nontransmitted_profile_len, action, elems, 0, 0, NULL); - } if (elems->tim && !elems->parse_error) { const struct ieee80211_tim_ie *tim_ie = elems->tim; @@ -1359,6 +1375,8 @@ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, offsetofend(struct ieee80211_bssid_index, dtim_count)) elems->dtim_count = elems->bssid_index->dtim_count; + kfree(nontransmitted_profile); + return crc; } -- cgit v1.2.3 From ef618b1bd6843cca42781acda829c429f337046f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 16 Mar 2019 18:06:30 +0100 Subject: mac80211: mesh: drop redundant rcu_read_lock/unlock calls The callers of these functions are all within RCU locked sections Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/mesh_hwmp.c | 26 +++++++------------------- net/mac80211/mesh_pathtbl.c | 2 +- 2 files changed, 8 insertions(+), 20 deletions(-) (limited to 'net') diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index c694c0dd907e..2c5929c0fa62 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -1130,16 +1130,13 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata, struct mesh_path *mpath; struct sk_buff *skb_to_free = NULL; u8 *target_addr = hdr->addr3; - int err = 0; /* Nulls are only sent to peers for PS and should be pre-addressed */ if (ieee80211_is_qos_nullfunc(hdr->frame_control)) return 0; - rcu_read_lock(); - err = mesh_nexthop_lookup(sdata, skb); - if (!err) - goto endlookup; + if (!mesh_nexthop_lookup(sdata, skb)) + return 0; /* no nexthop found, start resolving */ mpath = mesh_path_lookup(sdata, target_addr); @@ -1147,8 +1144,7 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata, mpath = mesh_path_add(sdata, target_addr); if (IS_ERR(mpath)) { mesh_path_discard_frame(sdata, skb); - err = PTR_ERR(mpath); - goto endlookup; + return PTR_ERR(mpath); } } @@ -1161,13 +1157,10 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata, info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; ieee80211_set_qos_hdr(sdata, skb); skb_queue_tail(&mpath->frame_queue, skb); - err = -ENOENT; if (skb_to_free) mesh_path_discard_frame(sdata, skb_to_free); -endlookup: - rcu_read_unlock(); - return err; + return -ENOENT; } /** @@ -1187,13 +1180,10 @@ int mesh_nexthop_lookup(struct ieee80211_sub_if_data *sdata, struct sta_info *next_hop; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; u8 *target_addr = hdr->addr3; - int err = -ENOENT; - rcu_read_lock(); mpath = mesh_path_lookup(sdata, target_addr); - if (!mpath || !(mpath->flags & MESH_PATH_ACTIVE)) - goto endlookup; + return -ENOENT; if (time_after(jiffies, mpath->exp_time - @@ -1208,12 +1198,10 @@ int mesh_nexthop_lookup(struct ieee80211_sub_if_data *sdata, memcpy(hdr->addr1, next_hop->sta.addr, ETH_ALEN); memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); ieee80211_mps_set_frame_flags(sdata, next_hop, hdr); - err = 0; + return 0; } -endlookup: - rcu_read_unlock(); - return err; + return -ENOENT; } void mesh_path_timer(struct timer_list *t) diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index 95eb5064fa91..a805d2acf0f7 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -217,7 +217,7 @@ static struct mesh_path *mpath_lookup(struct mesh_table *tbl, const u8 *dst, { struct mesh_path *mpath; - mpath = rhashtable_lookup_fast(&tbl->rhead, dst, mesh_rht_params); + mpath = rhashtable_lookup(&tbl->rhead, dst, mesh_rht_params); if (mpath && mpath_expired(mpath)) { spin_lock_bh(&mpath->state_lock); -- cgit v1.2.3 From f2af2df800d3648b1d68e02d5b8a5d77cfee8970 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 16 Mar 2019 18:06:32 +0100 Subject: mac80211: calculate hash for fq without holding fq->lock in itxq enqueue MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reduces lock contention on enqueue/dequeue of iTXQ packets Signed-off-by: Felix Fietkau Acked-by: Toke Høiland-Jørgensen Signed-off-by: Johannes Berg --- include/net/fq_impl.h | 18 ++++++++++-------- net/mac80211/tx.c | 15 ++++++++++----- 2 files changed, 20 insertions(+), 13 deletions(-) (limited to 'net') diff --git a/include/net/fq_impl.h b/include/net/fq_impl.h index be7c0fab3478..2caa86660ab0 100644 --- a/include/net/fq_impl.h +++ b/include/net/fq_impl.h @@ -107,21 +107,23 @@ begin: return skb; } +static u32 fq_flow_idx(struct fq *fq, struct sk_buff *skb) +{ + u32 hash = skb_get_hash_perturb(skb, fq->perturbation); + + return reciprocal_scale(hash, fq->flows_cnt); +} + static struct fq_flow *fq_flow_classify(struct fq *fq, - struct fq_tin *tin, + struct fq_tin *tin, u32 idx, struct sk_buff *skb, fq_flow_get_default_t get_default_func) { struct fq_flow *flow; - u32 hash; - u32 idx; lockdep_assert_held(&fq->lock); - hash = skb_get_hash_perturb(skb, fq->perturbation); - idx = reciprocal_scale(hash, fq->flows_cnt); flow = &fq->flows[idx]; - if (flow->tin && flow->tin != tin) { flow = get_default_func(fq, tin, idx, skb); tin->collisions++; @@ -153,7 +155,7 @@ static void fq_recalc_backlog(struct fq *fq, } static void fq_tin_enqueue(struct fq *fq, - struct fq_tin *tin, + struct fq_tin *tin, u32 idx, struct sk_buff *skb, fq_skb_free_t free_func, fq_flow_get_default_t get_default_func) @@ -163,7 +165,7 @@ static void fq_tin_enqueue(struct fq *fq, lockdep_assert_held(&fq->lock); - flow = fq_flow_classify(fq, tin, skb, get_default_func); + flow = fq_flow_classify(fq, tin, idx, skb, get_default_func); flow->tin = tin; flow->backlog += skb->len; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 8a49a74c0a37..2c0fec888021 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1399,11 +1399,15 @@ static void ieee80211_txq_enqueue(struct ieee80211_local *local, { struct fq *fq = &local->fq; struct fq_tin *tin = &txqi->tin; + u32 flow_idx = fq_flow_idx(fq, skb); ieee80211_set_skb_enqueue_time(skb); - fq_tin_enqueue(fq, tin, skb, + + spin_lock_bh(&fq->lock); + fq_tin_enqueue(fq, tin, flow_idx, skb, fq_skb_free_func, fq_flow_get_default_func); + spin_unlock_bh(&fq->lock); } static bool fq_vlan_filter_func(struct fq *fq, struct fq_tin *tin, @@ -1590,7 +1594,6 @@ static bool ieee80211_queue_skb(struct ieee80211_local *local, struct sta_info *sta, struct sk_buff *skb) { - struct fq *fq = &local->fq; struct ieee80211_vif *vif; struct txq_info *txqi; @@ -1608,9 +1611,7 @@ static bool ieee80211_queue_skb(struct ieee80211_local *local, if (!txqi) return false; - spin_lock_bh(&fq->lock); ieee80211_txq_enqueue(local, txqi, skb); - spin_unlock_bh(&fq->lock); schedule_and_wake_txq(local, txqi); @@ -3221,6 +3222,7 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, u8 max_subframes = sta->sta.max_amsdu_subframes; int max_frags = local->hw.max_tx_fragments; int max_amsdu_len = sta->sta.max_amsdu_len; + u32 flow_idx; __be16 len; void *data; bool ret = false; @@ -3249,6 +3251,8 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, max_amsdu_len = min_t(int, max_amsdu_len, sta->sta.max_tid_amsdu_len[tid]); + flow_idx = fq_flow_idx(fq, skb); + spin_lock_bh(&fq->lock); /* TODO: Ideally aggregation should be done on dequeue to remain @@ -3256,7 +3260,8 @@ static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, */ tin = &txqi->tin; - flow = fq_flow_classify(fq, tin, skb, fq_flow_get_default_func); + flow = fq_flow_classify(fq, tin, flow_idx, skb, + fq_flow_get_default_func); head = skb_peek_tail(&flow->queue); if (!head || skb_is_gso(head)) goto out; -- cgit v1.2.3 From ded4698b58cb23c22b0dcbd829ced19ce4e6ce02 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 16 Mar 2019 18:06:33 +0100 Subject: mac80211: run late dequeue late tx handlers without holding fq->lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reduces lock contention on enqueue/dequeue of iTXQ packets Signed-off-by: Felix Fietkau Acked-by: Toke Høiland-Jørgensen Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'net') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2c0fec888021..a3c6053cdffe 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3535,6 +3535,7 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, ieee80211_tx_result r; struct ieee80211_vif *vif = txq->vif; +begin: spin_lock_bh(&fq->lock); if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags) || @@ -3551,11 +3552,12 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, if (skb) goto out; -begin: skb = fq_tin_dequeue(fq, tin, fq_tin_dequeue_func); if (!skb) goto out; + spin_unlock_bh(&fq->lock); + hdr = (struct ieee80211_hdr *)skb->data; info = IEEE80211_SKB_CB(skb); @@ -3600,8 +3602,11 @@ begin: skb = __skb_dequeue(&tx.skbs); - if (!skb_queue_empty(&tx.skbs)) + if (!skb_queue_empty(&tx.skbs)) { + spin_lock_bh(&fq->lock); skb_queue_splice_tail(&tx.skbs, &txqi->frags); + spin_unlock_bh(&fq->lock); + } } if (skb_has_frag_list(skb) && @@ -3640,6 +3645,7 @@ begin: } IEEE80211_SKB_CB(skb)->control.vif = vif; + return skb; out: spin_unlock_bh(&fq->lock); -- cgit v1.2.3 From 8dbb000ee73be2c05e34756739ce308885312a29 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 16 Mar 2019 18:06:34 +0100 Subject: mac80211: set NETIF_F_LLTX when using intermediate tx queues MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When using iTXQ, tx sequence number allocation and statistics are run at dequeue time. Because of that, it is safe to enable NETIF_F_LLTX, which allows tx handlers to run on multiple CPUs in parallel. Signed-off-by: Felix Fietkau Acked-by: Toke Høiland-Jørgensen Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index f0d97eba250b..6e1b031535d5 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1225,6 +1225,7 @@ static void ieee80211_if_setup(struct net_device *dev) static void ieee80211_if_setup_no_queue(struct net_device *dev) { ieee80211_if_setup(dev); + dev->features |= NETIF_F_LLTX; dev->priv_flags |= IFF_NO_QUEUE; } -- cgit v1.2.3 From 092c4098f2b42b76068f73c8dd9f98c73b5eb372 Mon Sep 17 00:00:00 2001 From: Alexander Wetzel Date: Sat, 16 Mar 2019 21:44:43 +0100 Subject: mac80211: Optimize tailroom_needed update checks Optimize/cleanup the delay tailroom checks and adds one missing tailroom update. Signed-off-by: Alexander Wetzel Signed-off-by: Johannes Berg --- net/mac80211/key.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) (limited to 'net') diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 4700718e010f..41b8db37c7c1 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -140,6 +140,12 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key) * so clear that flag now to avoid trying to remove * it again later. */ + if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE && + !(key->conf.flags & (IEEE80211_KEY_FLAG_GENERATE_MMIC | + IEEE80211_KEY_FLAG_PUT_MIC_SPACE | + IEEE80211_KEY_FLAG_RESERVE_TAILROOM))) + increment_tailroom_need_count(sdata); + key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE; return -EINVAL; } @@ -177,9 +183,9 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key) if (!ret) { key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE; - if (!((key->conf.flags & (IEEE80211_KEY_FLAG_GENERATE_MMIC | - IEEE80211_KEY_FLAG_PUT_MIC_SPACE)) || - (key->conf.flags & IEEE80211_KEY_FLAG_RESERVE_TAILROOM))) + if (!(key->conf.flags & (IEEE80211_KEY_FLAG_GENERATE_MMIC | + IEEE80211_KEY_FLAG_PUT_MIC_SPACE | + IEEE80211_KEY_FLAG_RESERVE_TAILROOM))) decrease_tailroom_need_count(sdata, 1); WARN_ON((key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) && @@ -243,9 +249,9 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key) sta = key->sta; sdata = key->sdata; - if (!((key->conf.flags & (IEEE80211_KEY_FLAG_GENERATE_MMIC | - IEEE80211_KEY_FLAG_PUT_MIC_SPACE)) || - (key->conf.flags & IEEE80211_KEY_FLAG_RESERVE_TAILROOM))) + if (!(key->conf.flags & (IEEE80211_KEY_FLAG_GENERATE_MMIC | + IEEE80211_KEY_FLAG_PUT_MIC_SPACE | + IEEE80211_KEY_FLAG_RESERVE_TAILROOM))) increment_tailroom_need_count(sdata); key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE; @@ -1188,9 +1194,9 @@ void ieee80211_remove_key(struct ieee80211_key_conf *keyconf) if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) { key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE; - if (!((key->conf.flags & (IEEE80211_KEY_FLAG_GENERATE_MMIC | - IEEE80211_KEY_FLAG_PUT_MIC_SPACE)) || - (key->conf.flags & IEEE80211_KEY_FLAG_RESERVE_TAILROOM))) + if (!(key->conf.flags & (IEEE80211_KEY_FLAG_GENERATE_MMIC | + IEEE80211_KEY_FLAG_PUT_MIC_SPACE | + IEEE80211_KEY_FLAG_RESERVE_TAILROOM))) increment_tailroom_need_count(key->sdata); } -- cgit v1.2.3 From 6cdd3979a2bdc16116c5b2eb09475abf54ba9e70 Mon Sep 17 00:00:00 2001 From: Alexander Wetzel Date: Tue, 19 Mar 2019 21:34:07 +0100 Subject: nl80211/cfg80211: Extended Key ID support Add support for IEEE 802.11-2016 "Extended Key ID for Individually Addressed Frames". Extend cfg80211 and nl80211 to allow pairwise keys to be installed for Rx only, enable Tx separately and allow Key ID 1 for pairwise keys. Signed-off-by: Alexander Wetzel [use NLA_POLICY_RANGE() for NL80211_KEY_MODE] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ include/uapi/linux/nl80211.h | 28 ++++++++++++++++++++++++++++ net/wireless/nl80211.c | 32 ++++++++++++++++++++++++++++---- net/wireless/rdev-ops.h | 3 ++- net/wireless/trace.h | 31 ++++++++++++++++++++++++++----- net/wireless/util.c | 21 +++++++++++++++------ 6 files changed, 101 insertions(+), 16 deletions(-) (limited to 'net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f6665f8eba5a..2b039802ae2e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -485,6 +485,7 @@ struct vif_params { * with the get_key() callback, must be in little endian, * length given by @seq_len. * @seq_len: length of @seq. + * @mode: key install mode (RX_TX, NO_TX or SET_TX) */ struct key_params { const u8 *key; @@ -492,6 +493,7 @@ struct key_params { int key_len; int seq_len; u32 cipher; + enum nl80211_key_mode mode; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f00dbd82149e..e75615bf4453 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -4152,6 +4152,27 @@ enum nl80211_channel_type { NL80211_CHAN_HT40PLUS }; +/** + * enum nl80211_key_mode - Key mode + * + * @NL80211_KEY_RX_TX: (Default) + * Key can be used for Rx and Tx immediately + * + * The following modes can only be selected for unicast keys and when the + * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: + * + * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: + * Unicast key can only be used for Rx, Tx not allowed, yet + * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: + * The unicast key identified by idx and mac is cleared for Tx and becomes + * the preferred Tx key for the station. + */ +enum nl80211_key_mode { + NL80211_KEY_RX_TX, + NL80211_KEY_NO_TX, + NL80211_KEY_SET_TX +}; + /** * enum nl80211_chan_width - channel width definitions * @@ -4395,6 +4416,9 @@ enum nl80211_key_default_types { * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags * attributes, specifying what a key should be set as default as. * See &enum nl80211_key_default_types. + * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. + * Defaults to @NL80211_KEY_RX_TX. + * * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute */ @@ -4408,6 +4432,7 @@ enum nl80211_key_attributes { NL80211_KEY_DEFAULT_MGMT, NL80211_KEY_TYPE, NL80211_KEY_DEFAULT_TYPES, + NL80211_KEY_MODE, /* keep last */ __NL80211_KEY_AFTER_LAST, @@ -5353,6 +5378,8 @@ enum nl80211_feature_flags { * able to rekey an in-use key correctly. Userspace must not rekey PTK keys * if this flag is not set. Ignoring this can leak clear text packets and/or * freeze the connection. + * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for + * Individually Addressed Frames" from IEEE802.11-2016. * * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime * fairness for transmitted packets and has enabled airtime fairness @@ -5406,6 +5433,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, NL80211_EXT_FEATURE_AP_PMKSA_CACHING, NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, + NL80211_EXT_FEATURE_EXT_KEY_ID, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 0124bab1f8a7..ab9b095f6094 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -553,6 +553,7 @@ static const struct nla_policy nl80211_key_policy[NL80211_KEY_MAX + 1] = { [NL80211_KEY_DEFAULT_MGMT] = { .type = NLA_FLAG }, [NL80211_KEY_TYPE] = NLA_POLICY_MAX(NLA_U32, NUM_NL80211_KEYTYPES - 1), [NL80211_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED }, + [NL80211_KEY_MODE] = NLA_POLICY_RANGE(NLA_U8, 0, NL80211_KEY_SET_TX), }; /* policy for the key default flags */ @@ -967,6 +968,9 @@ static int nl80211_parse_key_new(struct genl_info *info, struct nlattr *key, k->def_multi = kdt[NL80211_KEY_DEFAULT_TYPE_MULTICAST]; } + if (tb[NL80211_KEY_MODE]) + k->p.mode = nla_get_u8(tb[NL80211_KEY_MODE]); + return 0; } @@ -3643,8 +3647,11 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info) if (key.idx < 0) return -EINVAL; - /* only support setting default key */ - if (!key.def && !key.defmgmt) + /* Only support setting default key and + * Extended Key ID action NL80211_KEY_SET_TX. + */ + if (!key.def && !key.defmgmt && + !(key.p.mode == NL80211_KEY_SET_TX)) return -EINVAL; wdev_lock(dev->ieee80211_ptr); @@ -3668,7 +3675,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info) #ifdef CONFIG_CFG80211_WEXT dev->ieee80211_ptr->wext.default_key = key.idx; #endif - } else { + } else if (key.defmgmt) { if (key.def_uni || !key.def_multi) { err = -EINVAL; goto out; @@ -3690,8 +3697,25 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info) #ifdef CONFIG_CFG80211_WEXT dev->ieee80211_ptr->wext.default_mgmt_key = key.idx; #endif - } + } else if (key.p.mode == NL80211_KEY_SET_TX && + wiphy_ext_feature_isset(&rdev->wiphy, + NL80211_EXT_FEATURE_EXT_KEY_ID)) { + u8 *mac_addr = NULL; + if (info->attrs[NL80211_ATTR_MAC]) + mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); + + if (!mac_addr || key.idx < 0 || key.idx > 1) { + err = -EINVAL; + goto out; + } + + err = rdev_add_key(rdev, dev, key.idx, + NL80211_KEYTYPE_PAIRWISE, + mac_addr, &key.p); + } else { + err = -EINVAL; + } out: wdev_unlock(dev->ieee80211_ptr); diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index c1e3210b09e6..18437a9deb54 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -77,7 +77,8 @@ static inline int rdev_add_key(struct cfg80211_registered_device *rdev, struct key_params *params) { int ret; - trace_rdev_add_key(&rdev->wiphy, netdev, key_index, pairwise, mac_addr); + trace_rdev_add_key(&rdev->wiphy, netdev, key_index, pairwise, + mac_addr, params->mode); ret = rdev->ops->add_key(&rdev->wiphy, netdev, key_index, pairwise, mac_addr, params); trace_rdev_return_int(&rdev->wiphy, ret); diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 2dda5291fc01..488ef2ce8231 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -430,22 +430,43 @@ DECLARE_EVENT_CLASS(key_handle, BOOL_TO_STR(__entry->pairwise), MAC_PR_ARG(mac_addr)) ); -DEFINE_EVENT(key_handle, rdev_add_key, +DEFINE_EVENT(key_handle, rdev_get_key, TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, u8 key_index, bool pairwise, const u8 *mac_addr), TP_ARGS(wiphy, netdev, key_index, pairwise, mac_addr) ); -DEFINE_EVENT(key_handle, rdev_get_key, +DEFINE_EVENT(key_handle, rdev_del_key, TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, u8 key_index, bool pairwise, const u8 *mac_addr), TP_ARGS(wiphy, netdev, key_index, pairwise, mac_addr) ); -DEFINE_EVENT(key_handle, rdev_del_key, +TRACE_EVENT(rdev_add_key, TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, u8 key_index, - bool pairwise, const u8 *mac_addr), - TP_ARGS(wiphy, netdev, key_index, pairwise, mac_addr) + bool pairwise, const u8 *mac_addr, u8 mode), + TP_ARGS(wiphy, netdev, key_index, pairwise, mac_addr, mode), + TP_STRUCT__entry( + WIPHY_ENTRY + NETDEV_ENTRY + MAC_ENTRY(mac_addr) + __field(u8, key_index) + __field(bool, pairwise) + __field(u8, mode) + ), + TP_fast_assign( + WIPHY_ASSIGN; + NETDEV_ASSIGN; + MAC_ASSIGN(mac_addr, mac_addr); + __entry->key_index = key_index; + __entry->pairwise = pairwise; + __entry->mode = mode; + ), + TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", key_index: %u, " + "mode: %u, pairwise: %s, mac addr: " MAC_PR_FMT, + WIPHY_PR_ARG, NETDEV_PR_ARG, __entry->key_index, + __entry->mode, BOOL_TO_STR(__entry->pairwise), + MAC_PR_ARG(mac_addr)) ); TRACE_EVENT(rdev_set_default_key, diff --git a/net/wireless/util.c b/net/wireless/util.c index e4b8db5e81ec..6c02c9cf7aa9 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -237,14 +237,23 @@ int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, case WLAN_CIPHER_SUITE_CCMP_256: case WLAN_CIPHER_SUITE_GCMP: case WLAN_CIPHER_SUITE_GCMP_256: - /* Disallow pairwise keys with non-zero index unless it's WEP - * or a vendor specific cipher (because current deployments use - * pairwise WEP keys with non-zero indices and for vendor - * specific ciphers this should be validated in the driver or - * hardware level - but 802.11i clearly specifies to use zero) + /* IEEE802.11-2016 allows only 0 and - when using Extended Key + * ID - 1 as index for pairwise keys. + * @NL80211_KEY_NO_TX is only allowed for pairwise keys when + * the driver supports Extended Key ID. + * @NL80211_KEY_SET_TX can't be set when installing and + * validating a key. */ - if (pairwise && key_idx) + if (params->mode == NL80211_KEY_NO_TX) { + if (!wiphy_ext_feature_isset(&rdev->wiphy, + NL80211_EXT_FEATURE_EXT_KEY_ID)) + return -EINVAL; + else if (!pairwise || key_idx < 0 || key_idx > 1) + return -EINVAL; + } else if ((pairwise && key_idx) || + params->mode == NL80211_KEY_SET_TX) { return -EINVAL; + } break; case WLAN_CIPHER_SUITE_AES_CMAC: case WLAN_CIPHER_SUITE_BIP_CMAC_256: -- cgit v1.2.3 From 96fc6efb9ad9d0cd8cbb4462f0eb2a07092649e6 Mon Sep 17 00:00:00 2001 From: Alexander Wetzel Date: Tue, 19 Mar 2019 21:34:08 +0100 Subject: mac80211: IEEE 802.11 Extended Key ID support Add support for Extended Key ID as defined in IEEE 802.11-2016. - Implement the nl80211 API for Extended Key ID - Extend mac80211 API to allow drivers to support Extended Key ID - Enable Extended Key ID by default for drivers only supporting SW crypto (e.g. mac80211_hwsim) - Allow unicast Tx usage to be supressed (IEEE80211_KEY_FLAG_NO_AUTO_TX) - Select the decryption key based on the MPDU keyid - Enforce existing assumptions in the code that rekeys don't change the cipher Signed-off-by: Alexander Wetzel [remove module parameter] Signed-off-by: Johannes Berg --- include/net/mac80211.h | 6 ++++ net/mac80211/cfg.c | 36 ++++++++++++++++++++++ net/mac80211/debugfs.c | 1 + net/mac80211/ieee80211_i.h | 2 +- net/mac80211/key.c | 63 ++++++++++++++++++++++++++++++--------- net/mac80211/key.h | 2 ++ net/mac80211/main.c | 5 ++++ net/mac80211/rx.c | 74 ++++++++++++++++++++++++---------------------- net/mac80211/sta_info.c | 9 ++++++ net/mac80211/tx.c | 13 ++------ 10 files changed, 151 insertions(+), 60 deletions(-) (limited to 'net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ac2ed8ec662b..c10abca55fde 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1697,6 +1697,7 @@ struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif); * @IEEE80211_KEY_FLAG_PUT_MIC_SPACE: This flag should be set by the driver for * a TKIP key if it only requires MIC space. Do not set together with * @IEEE80211_KEY_FLAG_GENERATE_MMIC on the same key. + * @IEEE80211_KEY_FLAG_NO_AUTO_TX: Key needs explicit Tx activation. */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_GENERATE_IV_MGMT = BIT(0), @@ -1708,6 +1709,7 @@ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_RX_MGMT = BIT(6), IEEE80211_KEY_FLAG_RESERVE_TAILROOM = BIT(7), IEEE80211_KEY_FLAG_PUT_MIC_SPACE = BIT(8), + IEEE80211_KEY_FLAG_NO_AUTO_TX = BIT(9), }; /** @@ -2243,6 +2245,9 @@ struct ieee80211_txq { * @IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID: Hardware supports multi BSSID * only for HE APs. Applies if @IEEE80211_HW_SUPPORTS_MULTI_BSSID is set. * + * @IEEE80211_HW_EXT_KEY_ID_NATIVE: Driver and hardware are supporting Extended + * Key ID and can handle two unicast keys per station for Rx and Tx. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2294,6 +2299,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN, IEEE80211_HW_SUPPORTS_MULTI_BSSID, IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID, + IEEE80211_HW_EXT_KEY_ID_NATIVE, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 09dd1c2860fc..14bbb7e8ad0e 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -351,6 +351,36 @@ static int ieee80211_set_noack_map(struct wiphy *wiphy, return 0; } +static int ieee80211_set_tx(struct ieee80211_sub_if_data *sdata, + const u8 *mac_addr, u8 key_idx) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_key *key; + struct sta_info *sta; + int ret = -EINVAL; + + if (!wiphy_ext_feature_isset(local->hw.wiphy, + NL80211_EXT_FEATURE_EXT_KEY_ID)) + return -EINVAL; + + sta = sta_info_get_bss(sdata, mac_addr); + + if (!sta) + return -EINVAL; + + if (sta->ptk_idx == key_idx) + return 0; + + mutex_lock(&local->key_mtx); + key = key_mtx_dereference(local, sta->ptk[key_idx]); + + if (key && key->conf.flags & IEEE80211_KEY_FLAG_NO_AUTO_TX) + ret = ieee80211_set_tx_key(key); + + mutex_unlock(&local->key_mtx); + return ret; +} + static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx, bool pairwise, const u8 *mac_addr, struct key_params *params) @@ -365,6 +395,9 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, if (!ieee80211_sdata_running(sdata)) return -ENETDOWN; + if (pairwise && params->mode == NL80211_KEY_SET_TX) + return ieee80211_set_tx(sdata, mac_addr, key_idx); + /* reject WEP and TKIP keys if WEP failed to initialize */ switch (params->cipher) { case WLAN_CIPHER_SUITE_WEP40: @@ -396,6 +429,9 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, if (pairwise) key->conf.flags |= IEEE80211_KEY_FLAG_PAIRWISE; + if (params->mode == NL80211_KEY_NO_TX) + key->conf.flags |= IEEE80211_KEY_FLAG_NO_AUTO_TX; + mutex_lock(&local->sta_mtx); if (mac_addr) { diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 2d43bc127043..aa6f23e1a457 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -221,6 +221,7 @@ static const char *hw_flag_names[] = { FLAG(TX_STATUS_NO_AMPDU_LEN), FLAG(SUPPORTS_MULTI_BSSID), FLAG(SUPPORTS_ONLY_HE_MULTI_BSSID), + FLAG(EXT_KEY_ID_NATIVE), #undef FLAG }; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c5708f8a7401..32094e2ac0cb 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1269,7 +1269,7 @@ struct ieee80211_local { /* * Key mutex, protects sdata's key_list and sta_info's - * key pointers (write access, they're RCU.) + * key pointers and ptk_idx (write access, they're RCU.) */ struct mutex key_mtx; diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 41b8db37c7c1..42d52cded4c1 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -265,9 +265,24 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key) sta ? sta->sta.addr : bcast_addr, ret); } +int ieee80211_set_tx_key(struct ieee80211_key *key) +{ + struct sta_info *sta = key->sta; + struct ieee80211_local *local = key->local; + struct ieee80211_key *old; + + assert_key_lock(local); + + old = key_mtx_dereference(local, sta->ptk[sta->ptk_idx]); + sta->ptk_idx = key->conf.keyidx; + ieee80211_check_fast_xmit(sta); + + return 0; +} + static int ieee80211_hw_key_replace(struct ieee80211_key *old_key, struct ieee80211_key *new_key, - bool ptk0rekey) + bool pairwise) { struct ieee80211_sub_if_data *sdata; struct ieee80211_local *local; @@ -284,8 +299,9 @@ static int ieee80211_hw_key_replace(struct ieee80211_key *old_key, assert_key_lock(old_key->local); sta = old_key->sta; - /* PTK only using key ID 0 needs special handling on rekey */ - if (new_key && sta && ptk0rekey) { + /* Unicast rekey without Extended Key ID needs special handling */ + if (new_key && sta && pairwise && + rcu_access_pointer(sta->ptk[sta->ptk_idx]) == old_key) { local = old_key->local; sdata = old_key->sdata; @@ -401,10 +417,6 @@ static int ieee80211_key_replace(struct ieee80211_sub_if_data *sdata, if (old) { idx = old->conf.keyidx; - /* TODO: proper implement and test "Extended Key ID for - * Individually Addressed Frames" from IEEE 802.11-2016. - * Till then always assume only key ID 0 is used for - * pairwise keys.*/ ret = ieee80211_hw_key_replace(old, new, pairwise); } else { /* new must be provided in case old is not */ @@ -421,15 +433,20 @@ static int ieee80211_key_replace(struct ieee80211_sub_if_data *sdata, if (sta) { if (pairwise) { rcu_assign_pointer(sta->ptk[idx], new); - sta->ptk_idx = idx; - if (new) { + if (new && + !(new->conf.flags & IEEE80211_KEY_FLAG_NO_AUTO_TX)) { + sta->ptk_idx = idx; clear_sta_flag(sta, WLAN_STA_BLOCK_BA); ieee80211_check_fast_xmit(sta); } } else { rcu_assign_pointer(sta->gtk[idx], new); } - if (new) + /* Only needed for transition from no key -> key. + * Still triggers unnecessary when using Extended Key ID + * and installing the second key ID the first time. + */ + if (new && !old) ieee80211_check_fast_rx(sta); } else { defunikey = old && @@ -745,16 +762,34 @@ int ieee80211_key_link(struct ieee80211_key *key, * can cause warnings to appear. */ bool delay_tailroom = sdata->vif.type == NL80211_IFTYPE_STATION; - int ret; + int ret = -EOPNOTSUPP; mutex_lock(&sdata->local->key_mtx); - if (sta && pairwise) + if (sta && pairwise) { + struct ieee80211_key *alt_key; + old_key = key_mtx_dereference(sdata->local, sta->ptk[idx]); - else if (sta) + alt_key = key_mtx_dereference(sdata->local, sta->ptk[idx ^ 1]); + + /* The rekey code assumes that the old and new key are using + * the same cipher. Enforce the assumption for pairwise keys. + */ + if (key && + ((alt_key && alt_key->conf.cipher != key->conf.cipher) || + (old_key && old_key->conf.cipher != key->conf.cipher))) + goto out; + } else if (sta) { old_key = key_mtx_dereference(sdata->local, sta->gtk[idx]); - else + } else { old_key = key_mtx_dereference(sdata->local, sdata->keys[idx]); + } + + /* Non-pairwise keys must also not switch the cipher on rekey */ + if (!pairwise) { + if (key && old_key && old_key->conf.cipher != key->conf.cipher) + goto out; + } /* * Silently accept key re-installation without really installing the diff --git a/net/mac80211/key.h b/net/mac80211/key.h index ebdb80b85dc3..f06fbd03d235 100644 --- a/net/mac80211/key.h +++ b/net/mac80211/key.h @@ -18,6 +18,7 @@ #define NUM_DEFAULT_KEYS 4 #define NUM_DEFAULT_MGMT_KEYS 2 +#define INVALID_PTK_KEYIDX 2 /* Keyidx always pointing to a NULL key for PTK */ struct ieee80211_local; struct ieee80211_sub_if_data; @@ -146,6 +147,7 @@ ieee80211_key_alloc(u32 cipher, int idx, size_t key_len, int ieee80211_key_link(struct ieee80211_key *key, struct ieee80211_sub_if_data *sdata, struct sta_info *sta); +int ieee80211_set_tx_key(struct ieee80211_key *key); void ieee80211_key_free(struct ieee80211_key *key, bool delay_tailroom); void ieee80211_key_free_unused(struct ieee80211_key *key); void ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, int idx, diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 800e67615e2a..5d6b93050c0b 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1051,6 +1051,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) } } + if (!local->ops->set_key || + ieee80211_hw_check(&local->hw, EXT_KEY_ID_NATIVE)) + wiphy_ext_feature_set(local->hw.wiphy, + NL80211_EXT_FEATURE_EXT_KEY_ID); + /* * Calculate scan IE length -- we need this to alloc * memory and to subtract from the driver limit. It diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 7f8d93401ce0..4a03c18b39a8 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1005,23 +1005,43 @@ static int ieee80211_get_mmie_keyidx(struct sk_buff *skb) return -1; } -static int ieee80211_get_cs_keyid(const struct ieee80211_cipher_scheme *cs, - struct sk_buff *skb) +static int ieee80211_get_keyid(struct sk_buff *skb, + const struct ieee80211_cipher_scheme *cs) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; __le16 fc; int hdrlen; + int minlen; + u8 key_idx_off; + u8 key_idx_shift; u8 keyid; fc = hdr->frame_control; hdrlen = ieee80211_hdrlen(fc); - if (skb->len < hdrlen + cs->hdr_len) + if (cs) { + minlen = hdrlen + cs->hdr_len; + key_idx_off = hdrlen + cs->key_idx_off; + key_idx_shift = cs->key_idx_shift; + } else { + /* WEP, TKIP, CCMP and GCMP */ + minlen = hdrlen + IEEE80211_WEP_IV_LEN; + key_idx_off = hdrlen + 3; + key_idx_shift = 6; + } + + if (unlikely(skb->len < minlen)) return -EINVAL; - skb_copy_bits(skb, hdrlen + cs->key_idx_off, &keyid, 1); - keyid &= cs->key_idx_mask; - keyid >>= cs->key_idx_shift; + skb_copy_bits(skb, key_idx_off, &keyid, 1); + + if (cs) + keyid &= cs->key_idx_mask; + keyid >>= key_idx_shift; + + /* cs could use more than the usual two bits for the keyid */ + if (unlikely(keyid >= NUM_DEFAULT_KEYS)) + return -EINVAL; return keyid; } @@ -1852,9 +1872,9 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; int keyidx; - int hdrlen; ieee80211_rx_result result = RX_DROP_UNUSABLE; struct ieee80211_key *sta_ptk = NULL; + struct ieee80211_key *ptk_idx = NULL; int mmie_keyidx = -1; __le16 fc; const struct ieee80211_cipher_scheme *cs = NULL; @@ -1892,21 +1912,24 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) if (rx->sta) { int keyid = rx->sta->ptk_idx; + sta_ptk = rcu_dereference(rx->sta->ptk[keyid]); - if (ieee80211_has_protected(fc) && rx->sta->cipher_scheme) { + if (ieee80211_has_protected(fc)) { cs = rx->sta->cipher_scheme; - keyid = ieee80211_get_cs_keyid(cs, rx->skb); + keyid = ieee80211_get_keyid(rx->skb, cs); + if (unlikely(keyid < 0)) return RX_DROP_UNUSABLE; + + ptk_idx = rcu_dereference(rx->sta->ptk[keyid]); } - sta_ptk = rcu_dereference(rx->sta->ptk[keyid]); } if (!ieee80211_has_protected(fc)) mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb); if (!is_multicast_ether_addr(hdr->addr1) && sta_ptk) { - rx->key = sta_ptk; + rx->key = ptk_idx ? ptk_idx : sta_ptk; if ((status->flag & RX_FLAG_DECRYPTED) && (status->flag & RX_FLAG_IV_STRIPPED)) return RX_CONTINUE; @@ -1966,8 +1989,6 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) } return RX_CONTINUE; } else { - u8 keyid; - /* * The device doesn't give us the IV so we won't be * able to look up the key. That's ok though, we @@ -1981,23 +2002,10 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) (status->flag & RX_FLAG_IV_STRIPPED)) return RX_CONTINUE; - hdrlen = ieee80211_hdrlen(fc); - - if (cs) { - keyidx = ieee80211_get_cs_keyid(cs, rx->skb); + keyidx = ieee80211_get_keyid(rx->skb, cs); - if (unlikely(keyidx < 0)) - return RX_DROP_UNUSABLE; - } else { - if (rx->skb->len < 8 + hdrlen) - return RX_DROP_UNUSABLE; /* TODO: count this? */ - /* - * no need to call ieee80211_wep_get_keyidx, - * it verifies a bunch of things we've done already - */ - skb_copy_bits(rx->skb, hdrlen + 3, &keyid, 1); - keyidx = keyid >> 6; - } + if (unlikely(keyidx < 0)) + return RX_DROP_UNUSABLE; /* check per-station GTK first, if multicast packet */ if (is_multicast_ether_addr(hdr->addr1) && rx->sta) @@ -4042,12 +4050,8 @@ void ieee80211_check_fast_rx(struct sta_info *sta) case WLAN_CIPHER_SUITE_GCMP_256: break; default: - /* we also don't want to deal with WEP or cipher scheme - * since those require looking up the key idx in the - * frame, rather than assuming the PTK is used - * (we need to revisit this once we implement the real - * PTK index, which is now valid in the spec, but we - * haven't implemented that part yet) + /* We also don't want to deal with + * WEP or cipher scheme. */ goto clear_rcu; } diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index a81e1279a76d..a4932ee3595c 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -347,6 +347,15 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, sta->sta.max_rx_aggregation_subframes = local->hw.max_rx_aggregation_subframes; + /* Extended Key ID needs to install keys for keyid 0 and 1 Rx-only. + * The Tx path starts to use a key as soon as the key slot ptk_idx + * references to is not NULL. To not use the initial Rx-only key + * prematurely for Tx initialize ptk_idx to an impossible PTK keyid + * which always will refer to a NULL key. + */ + BUILD_BUG_ON(ARRAY_SIZE(sta->ptk) <= INVALID_PTK_KEYIDX); + sta->ptk_idx = INVALID_PTK_KEYIDX; + sta->local = local; sta->sdata = sdata; sta->rx_stats.last_rx = jiffies; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index a3c6053cdffe..c49fd1e961d0 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3001,23 +3001,15 @@ void ieee80211_check_fast_xmit(struct sta_info *sta) switch (build.key->conf.cipher) { case WLAN_CIPHER_SUITE_CCMP: case WLAN_CIPHER_SUITE_CCMP_256: - /* add fixed key ID */ - if (gen_iv) { - (build.hdr + build.hdr_len)[3] = - 0x20 | (build.key->conf.keyidx << 6); + if (gen_iv) build.pn_offs = build.hdr_len; - } if (gen_iv || iv_spc) build.hdr_len += IEEE80211_CCMP_HDR_LEN; break; case WLAN_CIPHER_SUITE_GCMP: case WLAN_CIPHER_SUITE_GCMP_256: - /* add fixed key ID */ - if (gen_iv) { - (build.hdr + build.hdr_len)[3] = - 0x20 | (build.key->conf.keyidx << 6); + if (gen_iv) build.pn_offs = build.hdr_len; - } if (gen_iv || iv_spc) build.hdr_len += IEEE80211_GCMP_HDR_LEN; break; @@ -3388,6 +3380,7 @@ static void ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata, pn = atomic64_inc_return(&key->conf.tx_pn); crypto_hdr[0] = pn; crypto_hdr[1] = pn >> 8; + crypto_hdr[3] = 0x20 | (key->conf.keyidx << 6); crypto_hdr[4] = pn >> 16; crypto_hdr[5] = pn >> 24; crypto_hdr[6] = pn >> 32; -- cgit v1.2.3 From 1974da8b31e6ea9c96c21505ffcb546fa59add23 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 25 Mar 2019 08:59:23 +0100 Subject: mac80211: when using iTXQ, select the queue in ieee80211_subif_start_xmit When using iTXQ, the network stack does not need the real queue number, since mac80211 is using its internal queues anyway. In that case we can defer selecting the queue and remove a redundant station lookup in the tx path to save some CPU cycles. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 11 +++++++- net/mac80211/wme.c | 82 +++++++++++++++++++++++++++++------------------------- net/mac80211/wme.h | 2 ++ 3 files changed, 56 insertions(+), 39 deletions(-) (limited to 'net') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index c49fd1e961d0..5a89733723e7 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3797,6 +3797,7 @@ void __ieee80211_subif_start_xmit(struct sk_buff *skb, u32 info_flags) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; struct sta_info *sta; struct sk_buff *next; @@ -3810,7 +3811,15 @@ void __ieee80211_subif_start_xmit(struct sk_buff *skb, if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) goto out_free; - if (!IS_ERR_OR_NULL(sta)) { + if (IS_ERR(sta)) + sta = NULL; + + if (local->ops->wake_tx_queue) { + u16 queue = __ieee80211_select_queue(sdata, sta, skb); + skb_set_queue_mapping(skb, queue); + } + + if (sta) { struct ieee80211_fast_tx *fast_tx; sk_pacing_shift_update(skb->sk, sdata->local->hw.tx_sk_pacing_shift); diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 5f7c96368b11..6a3187883c4b 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -141,6 +141,42 @@ u16 ieee80211_select_queue_80211(struct ieee80211_sub_if_data *sdata, return ieee80211_downgrade_queue(sdata, NULL, skb); } +u16 __ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, struct sk_buff *skb) +{ + struct mac80211_qos_map *qos_map; + bool qos; + + /* all mesh/ocb stations are required to support WME */ + if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT || + sdata->vif.type == NL80211_IFTYPE_OCB) + qos = true; + else if (sta) + qos = sta->sta.wme; + else + qos = false; + + if (!qos) { + skb->priority = 0; /* required for correct WPA/11i MIC */ + return IEEE80211_AC_BE; + } + + if (skb->protocol == sdata->control_port_protocol) { + skb->priority = 7; + goto downgrade; + } + + /* use the data classifier to determine what 802.1d tag the + * data frame has */ + qos_map = rcu_dereference(sdata->qos_map); + skb->priority = cfg80211_classify8021d(skb, qos_map ? + &qos_map->qos_map : NULL); + + downgrade: + return ieee80211_downgrade_queue(sdata, sta, skb); +} + + /* Indicate which queue to use. */ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) @@ -148,10 +184,12 @@ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; struct sta_info *sta = NULL; const u8 *ra = NULL; - bool qos = false; - struct mac80211_qos_map *qos_map; u16 ret; + /* when using iTXQ, we can do this later */ + if (local->ops->wake_tx_queue) + return 0; + if (local->hw.queues < IEEE80211_NUM_ACS || skb->len < 6) { skb->priority = 0; /* required for correct WPA/11i MIC */ return 0; @@ -161,10 +199,8 @@ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, switch (sdata->vif.type) { case NL80211_IFTYPE_AP_VLAN: sta = rcu_dereference(sdata->u.vlan.sta); - if (sta) { - qos = sta->sta.wme; + if (sta) break; - } /* fall through */ case NL80211_IFTYPE_AP: ra = skb->data; @@ -172,56 +208,26 @@ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, case NL80211_IFTYPE_WDS: ra = sdata->u.wds.remote_addr; break; -#ifdef CONFIG_MAC80211_MESH - case NL80211_IFTYPE_MESH_POINT: - qos = true; - break; -#endif case NL80211_IFTYPE_STATION: /* might be a TDLS station */ sta = sta_info_get(sdata, skb->data); if (sta) - qos = sta->sta.wme; + break; ra = sdata->u.mgd.bssid; break; case NL80211_IFTYPE_ADHOC: ra = skb->data; break; - case NL80211_IFTYPE_OCB: - /* all stations are required to support WME */ - qos = true; - break; default: break; } - if (!sta && ra && !is_multicast_ether_addr(ra)) { + if (!sta && ra && !is_multicast_ether_addr(ra)) sta = sta_info_get(sdata, ra); - if (sta) - qos = sta->sta.wme; - } - if (!qos) { - skb->priority = 0; /* required for correct WPA/11i MIC */ - ret = IEEE80211_AC_BE; - goto out; - } + ret = __ieee80211_select_queue(sdata, sta, skb); - if (skb->protocol == sdata->control_port_protocol) { - skb->priority = 7; - goto downgrade; - } - - /* use the data classifier to determine what 802.1d tag the - * data frame has */ - qos_map = rcu_dereference(sdata->qos_map); - skb->priority = cfg80211_classify8021d(skb, qos_map ? - &qos_map->qos_map : NULL); - - downgrade: - ret = ieee80211_downgrade_queue(sdata, sta, skb); - out: rcu_read_unlock(); return ret; } diff --git a/net/mac80211/wme.h b/net/mac80211/wme.h index 80151edc5195..b1b1439cb91b 100644 --- a/net/mac80211/wme.h +++ b/net/mac80211/wme.h @@ -16,6 +16,8 @@ u16 ieee80211_select_queue_80211(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, struct ieee80211_hdr *hdr); +u16 __ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, struct sk_buff *skb); u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb); void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata, -- cgit v1.2.3 From 7f2e12e1bf9917e33f2e0e1aa8bfd10ea7527766 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 25 Mar 2019 09:50:15 +0100 Subject: mac80211: minstrel_ht: add support for rates with 4 spatial streams This is needed for the upcoming driver for MT7615 4x4 802.11ac chipsets Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 10 ++++++++++ net/mac80211/rc80211_minstrel_ht.h | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'net') diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index ccaf951e4e31..00a3a8ce27fe 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -157,44 +157,54 @@ const struct mcs_group minstrel_mcs_groups[] = { MCS_GROUP(1, 0, BW_20, 5), MCS_GROUP(2, 0, BW_20, 4), MCS_GROUP(3, 0, BW_20, 4), + MCS_GROUP(4, 0, BW_20, 4), MCS_GROUP(1, 1, BW_20, 5), MCS_GROUP(2, 1, BW_20, 4), MCS_GROUP(3, 1, BW_20, 4), + MCS_GROUP(4, 1, BW_20, 4), MCS_GROUP(1, 0, BW_40, 4), MCS_GROUP(2, 0, BW_40, 4), MCS_GROUP(3, 0, BW_40, 4), + MCS_GROUP(4, 0, BW_40, 4), MCS_GROUP(1, 1, BW_40, 4), MCS_GROUP(2, 1, BW_40, 4), MCS_GROUP(3, 1, BW_40, 4), + MCS_GROUP(4, 1, BW_40, 4), CCK_GROUP(8), VHT_GROUP(1, 0, BW_20, 5), VHT_GROUP(2, 0, BW_20, 4), VHT_GROUP(3, 0, BW_20, 4), + VHT_GROUP(4, 0, BW_20, 4), VHT_GROUP(1, 1, BW_20, 5), VHT_GROUP(2, 1, BW_20, 4), VHT_GROUP(3, 1, BW_20, 4), + VHT_GROUP(4, 1, BW_20, 4), VHT_GROUP(1, 0, BW_40, 4), VHT_GROUP(2, 0, BW_40, 4), VHT_GROUP(3, 0, BW_40, 4), + VHT_GROUP(4, 0, BW_40, 3), VHT_GROUP(1, 1, BW_40, 4), VHT_GROUP(2, 1, BW_40, 4), VHT_GROUP(3, 1, BW_40, 4), + VHT_GROUP(4, 1, BW_40, 3), VHT_GROUP(1, 0, BW_80, 4), VHT_GROUP(2, 0, BW_80, 4), VHT_GROUP(3, 0, BW_80, 4), + VHT_GROUP(4, 0, BW_80, 2), VHT_GROUP(1, 1, BW_80, 4), VHT_GROUP(2, 1, BW_80, 4), VHT_GROUP(3, 1, BW_80, 4), + VHT_GROUP(4, 1, BW_80, 2), }; static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES] __read_mostly; diff --git a/net/mac80211/rc80211_minstrel_ht.h b/net/mac80211/rc80211_minstrel_ht.h index 26b7a3244b47..f762e5ba7c2e 100644 --- a/net/mac80211/rc80211_minstrel_ht.h +++ b/net/mac80211/rc80211_minstrel_ht.h @@ -13,7 +13,7 @@ * The number of streams can be changed to 2 to reduce code * size and memory footprint. */ -#define MINSTREL_MAX_STREAMS 3 +#define MINSTREL_MAX_STREAMS 4 #define MINSTREL_HT_STREAM_GROUPS 4 /* BW(=2) * SGI(=2) */ #define MINSTREL_VHT_STREAM_GROUPS 6 /* BW(=3) * SGI(=2) */ -- cgit v1.2.3 From c2b17948fc78c4fde80da34e0dfc44be8f076191 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 25 Mar 2019 09:50:16 +0100 Subject: mac80211: minstrel_ht: automatically calculate rate duration shift A per-group shift was added to reduce the size of the per-rate transmit duration field to u16 without sacrificing a lot of precision This patch changes the macros to automatically calculate the best value for this shift based on the lowest rate within the group. This simplifies adding more groups and slightly improves accuracy for some of the existing groups. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 134 ++++++++++++++++++++++--------------- 1 file changed, 80 insertions(+), 54 deletions(-) (limited to 'net') diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 00a3a8ce27fe..8b168724c5e7 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -51,8 +51,13 @@ MINSTREL_MAX_STREAMS * _sgi + \ _streams - 1 +#define _MAX(a, b) (((a)>(b))?(a):(b)) + +#define GROUP_SHIFT(duration) \ + _MAX(0, 16 - __builtin_clz(duration)) + /* MCS rate information for an MCS group */ -#define MCS_GROUP(_streams, _sgi, _ht40, _s) \ +#define __MCS_GROUP(_streams, _sgi, _ht40, _s) \ [GROUP_IDX(_streams, _sgi, _ht40)] = { \ .streams = _streams, \ .shift = _s, \ @@ -72,6 +77,13 @@ } \ } +#define MCS_GROUP_SHIFT(_streams, _sgi, _ht40) \ + GROUP_SHIFT(MCS_DURATION(_streams, _sgi, _ht40 ? 54 : 26)) + +#define MCS_GROUP(_streams, _sgi, _ht40) \ + __MCS_GROUP(_streams, _sgi, _ht40, \ + MCS_GROUP_SHIFT(_streams, _sgi, _ht40)) + #define VHT_GROUP_IDX(_streams, _sgi, _bw) \ (MINSTREL_VHT_GROUP_0 + \ MINSTREL_MAX_STREAMS * 2 * (_bw) + \ @@ -81,7 +93,7 @@ #define BW2VBPS(_bw, r3, r2, r1) \ (_bw == BW_80 ? r3 : _bw == BW_40 ? r2 : r1) -#define VHT_GROUP(_streams, _sgi, _bw, _s) \ +#define __VHT_GROUP(_streams, _sgi, _bw, _s) \ [VHT_GROUP_IDX(_streams, _sgi, _bw)] = { \ .streams = _streams, \ .shift = _s, \ @@ -114,6 +126,14 @@ } \ } +#define VHT_GROUP_SHIFT(_streams, _sgi, _bw) \ + GROUP_SHIFT(MCS_DURATION(_streams, _sgi, \ + BW2VBPS(_bw, 117, 54, 26))) + +#define VHT_GROUP(_streams, _sgi, _bw) \ + __VHT_GROUP(_streams, _sgi, _bw, \ + VHT_GROUP_SHIFT(_streams, _sgi, _bw)) + #define CCK_DURATION(_bitrate, _short, _len) \ (1000 * (10 /* SIFS */ + \ (_short ? 72 + 24 : 144 + 48) + \ @@ -129,7 +149,7 @@ CCK_ACK_DURATION(55, _short) >> _s, \ CCK_ACK_DURATION(110, _short) >> _s -#define CCK_GROUP(_s) \ +#define __CCK_GROUP(_s) \ [MINSTREL_CCK_GROUP] = { \ .streams = 1, \ .flags = 0, \ @@ -140,6 +160,12 @@ } \ } +#define CCK_GROUP_SHIFT \ + GROUP_SHIFT(CCK_ACK_DURATION(10, false)) + +#define CCK_GROUP __CCK_GROUP(CCK_GROUP_SHIFT) + + static bool minstrel_vht_only = true; module_param(minstrel_vht_only, bool, 0644); MODULE_PARM_DESC(minstrel_vht_only, @@ -154,57 +180,57 @@ MODULE_PARM_DESC(minstrel_vht_only, * BW -> SGI -> #streams */ const struct mcs_group minstrel_mcs_groups[] = { - MCS_GROUP(1, 0, BW_20, 5), - MCS_GROUP(2, 0, BW_20, 4), - MCS_GROUP(3, 0, BW_20, 4), - MCS_GROUP(4, 0, BW_20, 4), - - MCS_GROUP(1, 1, BW_20, 5), - MCS_GROUP(2, 1, BW_20, 4), - MCS_GROUP(3, 1, BW_20, 4), - MCS_GROUP(4, 1, BW_20, 4), - - MCS_GROUP(1, 0, BW_40, 4), - MCS_GROUP(2, 0, BW_40, 4), - MCS_GROUP(3, 0, BW_40, 4), - MCS_GROUP(4, 0, BW_40, 4), - - MCS_GROUP(1, 1, BW_40, 4), - MCS_GROUP(2, 1, BW_40, 4), - MCS_GROUP(3, 1, BW_40, 4), - MCS_GROUP(4, 1, BW_40, 4), - - CCK_GROUP(8), - - VHT_GROUP(1, 0, BW_20, 5), - VHT_GROUP(2, 0, BW_20, 4), - VHT_GROUP(3, 0, BW_20, 4), - VHT_GROUP(4, 0, BW_20, 4), - - VHT_GROUP(1, 1, BW_20, 5), - VHT_GROUP(2, 1, BW_20, 4), - VHT_GROUP(3, 1, BW_20, 4), - VHT_GROUP(4, 1, BW_20, 4), - - VHT_GROUP(1, 0, BW_40, 4), - VHT_GROUP(2, 0, BW_40, 4), - VHT_GROUP(3, 0, BW_40, 4), - VHT_GROUP(4, 0, BW_40, 3), - - VHT_GROUP(1, 1, BW_40, 4), - VHT_GROUP(2, 1, BW_40, 4), - VHT_GROUP(3, 1, BW_40, 4), - VHT_GROUP(4, 1, BW_40, 3), - - VHT_GROUP(1, 0, BW_80, 4), - VHT_GROUP(2, 0, BW_80, 4), - VHT_GROUP(3, 0, BW_80, 4), - VHT_GROUP(4, 0, BW_80, 2), - - VHT_GROUP(1, 1, BW_80, 4), - VHT_GROUP(2, 1, BW_80, 4), - VHT_GROUP(3, 1, BW_80, 4), - VHT_GROUP(4, 1, BW_80, 2), + MCS_GROUP(1, 0, BW_20), + MCS_GROUP(2, 0, BW_20), + MCS_GROUP(3, 0, BW_20), + MCS_GROUP(4, 0, BW_20), + + MCS_GROUP(1, 1, BW_20), + MCS_GROUP(2, 1, BW_20), + MCS_GROUP(3, 1, BW_20), + MCS_GROUP(4, 1, BW_20), + + MCS_GROUP(1, 0, BW_40), + MCS_GROUP(2, 0, BW_40), + MCS_GROUP(3, 0, BW_40), + MCS_GROUP(4, 0, BW_40), + + MCS_GROUP(1, 1, BW_40), + MCS_GROUP(2, 1, BW_40), + MCS_GROUP(3, 1, BW_40), + MCS_GROUP(4, 1, BW_40), + + CCK_GROUP, + + VHT_GROUP(1, 0, BW_20), + VHT_GROUP(2, 0, BW_20), + VHT_GROUP(3, 0, BW_20), + VHT_GROUP(4, 0, BW_20), + + VHT_GROUP(1, 1, BW_20), + VHT_GROUP(2, 1, BW_20), + VHT_GROUP(3, 1, BW_20), + VHT_GROUP(4, 1, BW_20), + + VHT_GROUP(1, 0, BW_40), + VHT_GROUP(2, 0, BW_40), + VHT_GROUP(3, 0, BW_40), + VHT_GROUP(4, 0, BW_40), + + VHT_GROUP(1, 1, BW_40), + VHT_GROUP(2, 1, BW_40), + VHT_GROUP(3, 1, BW_40), + VHT_GROUP(4, 1, BW_40), + + VHT_GROUP(1, 0, BW_80), + VHT_GROUP(2, 0, BW_80), + VHT_GROUP(3, 0, BW_80), + VHT_GROUP(4, 0, BW_80), + + VHT_GROUP(1, 1, BW_80), + VHT_GROUP(2, 1, BW_80), + VHT_GROUP(3, 1, BW_80), + VHT_GROUP(4, 1, BW_80), }; static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES] __read_mostly; -- cgit v1.2.3 From 5dc8cdce1d722c733f8c7af14c5fb595cfedbfa8 Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Tue, 26 Mar 2019 09:27:37 +0000 Subject: mac80211/cfg80211: update bss channel on channel switch FullMAC STAs have no way to update bss channel after CSA channel switch completion. As a result, user-space tools may provide inconsistent channel info. For instance, consider the following two commands: $ sudo iw dev wlan0 link $ sudo iw dev wlan0 info The latter command gets channel info from the hardware, so most probably its output will be correct. However the former command gets channel info from scan cache, so its output will contain outdated channel info. In fact, current bss channel info will not be updated until the next [re-]connect. Note that mac80211 STAs have a workaround for this, but it requires access to internal cfg80211 data, see ieee80211_chswitch_work: /* XXX: shouldn't really modify cfg80211-owned data! */ ifmgd->associated->channel = sdata->csa_chandef.chan; This patch suggests to convert mac80211 workaround into cfg80211 behavior and to update current bss channel in cfg80211_ch_switch_notify. Signed-off-by: Sergey Matyukevich Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 3 --- net/wireless/nl80211.c | 5 +++++ 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'net') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 2dbcf5d5512e..b7a9fe3d5fcb 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1188,9 +1188,6 @@ static void ieee80211_chswitch_work(struct work_struct *work) goto out; } - /* XXX: shouldn't really modify cfg80211-owned data! */ - ifmgd->associated->channel = sdata->csa_chandef.chan; - ifmgd->csa_waiting_bcn = true; ieee80211_sta_reset_beacon_monitor(sdata); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ab9b095f6094..e7984f025bc7 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -15731,6 +15731,11 @@ void cfg80211_ch_switch_notify(struct net_device *dev, wdev->chandef = *chandef; wdev->preset_chandef = *chandef; + + if (wdev->iftype == NL80211_IFTYPE_STATION && + !WARN_ON(!wdev->current_bss)) + wdev->current_bss->pub.channel = chandef->chan; + nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL, NL80211_CMD_CH_SWITCH_NOTIFY, 0); } -- cgit v1.2.3 From 5e280420916f9483ce7b483ccc378f3c7b5929ab Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 27 Mar 2019 18:35:45 +0000 Subject: cfg80211: remove redundant zero check on variable 'changed' The zero check on variable changed is redundant as it must be between 1 and 3 at the end of the proceeding if statement block. Remove the redundant check. Signed-off-by: Colin Ian King Signed-off-by: Johannes Berg --- net/wireless/wext-compat.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'net') diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index d522787c7354..46e4d69db845 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -353,9 +353,6 @@ static int cfg80211_wext_siwretry(struct net_device *dev, changed |= WIPHY_PARAM_RETRY_SHORT; } - if (!changed) - return 0; - err = rdev_set_wiphy_params(rdev, changed); if (err) { wdev->wiphy->retry_short = oshort; -- cgit v1.2.3 From 276d9e82e06cade9c4d081664ad63da1be971642 Mon Sep 17 00:00:00 2001 From: Julius Niedworok Date: Thu, 28 Mar 2019 21:01:06 +0100 Subject: mac80211: debugfs option to force TX status frames At Technical University of Munich we use MAC 802.11 TX status frames to perform several measurements in MAC 802.11 setups. With ath based drivers this was possible until commit d94a461d7a7df6 ("ath9k: use ieee80211_tx_status_noskb where possible") as the driver ignored the IEEE80211_TX_CTL_REQ_TX_STATUS flag and always delivered tx_status frames. Since that commit, this behavior was changed and the driver now adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. Due to performance reasons, IEEE80211_TX_CTL_REQ_TX_STATUS is not set for data frames from interfaces in managed mode. Hence, frames that are sent from a managed mode interface do never deliver tx_status frames. This remains true even if a monitor mode interface (the measurement interface) is added to the same ieee80211 physical device. Thus, there is no possibility for receiving tx_status frames for frames sent on an interface in managed mode, if the driver adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. In order to force delivery of tx_status frames for research and debugging purposes, implement a debugfs option force_tx_status for ieee80211 physical devices. When this option is set for a physical device, IEEE80211_TX_CTL_REQ_TX_STATUS is enabled in all packets sent from that device. This option can be set via /sys/kernel/debug/ieee80211//force_tx_status. The default is disabled. Co-developed-by: Charlie Groh Signed-off-by: Charlie Groh Signed-off-by: Julius Niedworok Signed-off-by: Johannes Berg --- net/mac80211/debugfs.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++ net/mac80211/ieee80211_i.h | 1 + net/mac80211/tx.c | 10 +++++++++ 3 files changed, 64 insertions(+) (limited to 'net') diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index aa6f23e1a457..0d462206eef6 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -150,6 +150,58 @@ static const struct file_operations aqm_ops = { .llseek = default_llseek, }; +static ssize_t force_tx_status_read(struct file *file, + char __user *user_buf, + size_t count, + loff_t *ppos) +{ + struct ieee80211_local *local = file->private_data; + char buf[3]; + int len = 0; + + len = scnprintf(buf, sizeof(buf), "%d\n", (int)local->force_tx_status); + + return simple_read_from_buffer(user_buf, count, ppos, + buf, len); +} + +static ssize_t force_tx_status_write(struct file *file, + const char __user *user_buf, + size_t count, + loff_t *ppos) +{ + struct ieee80211_local *local = file->private_data; + char buf[3]; + size_t len; + + if (count > sizeof(buf)) + return -EINVAL; + + if (copy_from_user(buf, user_buf, count)) + return -EFAULT; + + buf[sizeof(buf) - 1] = '\0'; + len = strlen(buf); + if (len > 0 && buf[len - 1] == '\n') + buf[len - 1] = 0; + + if (buf[0] == '0' && buf[1] == '\0') + local->force_tx_status = 0; + else if (buf[0] == '1' && buf[1] == '\0') + local->force_tx_status = 1; + else + return -EINVAL; + + return count; +} + +static const struct file_operations force_tx_status_ops = { + .write = force_tx_status_write, + .read = force_tx_status_read, + .open = simple_open, + .llseek = default_llseek, +}; + #ifdef CONFIG_PM static ssize_t reset_write(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) @@ -383,6 +435,7 @@ void debugfs_hw_add(struct ieee80211_local *local) DEBUGFS_ADD(hwflags); DEBUGFS_ADD(user_power); DEBUGFS_ADD(power); + DEBUGFS_ADD_MODE(force_tx_status, 0600); if (local->ops->wake_tx_queue) DEBUGFS_ADD_MODE(aqm, 0600); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 32094e2ac0cb..5a0dedd31266 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1384,6 +1384,7 @@ struct ieee80211_local { struct dentry *rcdir; struct dentry *keys; } debugfs; + bool force_tx_status; #endif /* diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 5a89733723e7..9426bcce95e7 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2471,6 +2471,11 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, if (IS_ERR(sta)) sta = NULL; +#ifdef CONFIG_MAC80211_DEBUGFS + if (local->force_tx_status) + info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; +#endif + /* convert Ethernet header to proper 802.11 header (based on * operation mode) */ ethertype = (skb->data[12] << 8) | skb->data[13]; @@ -3473,6 +3478,11 @@ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata, (tid_tx ? IEEE80211_TX_CTL_AMPDU : 0); info->control.flags = IEEE80211_TX_CTRL_FAST_XMIT; +#ifdef CONFIG_MAC80211_DEBUGFS + if (local->force_tx_status) + info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; +#endif + if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; *ieee80211_get_qos_ctl(hdr) = tid; -- cgit v1.2.3 From 9f8c7136e8aa92a334ef2fc92dd6b5bbd23886da Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 3 Apr 2019 10:31:51 -0500 Subject: cfg80211: Use struct_size() in kzalloc() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable size_of_regd is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Johannes Berg --- net/wireless/reg.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) (limited to 'net') diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2f1bf91eb226..0d5b11d7c6ed 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -427,14 +427,10 @@ static const struct ieee80211_regdomain * reg_copy_regd(const struct ieee80211_regdomain *src_regd) { struct ieee80211_regdomain *regd; - int size_of_regd; unsigned int i; - size_of_regd = - sizeof(struct ieee80211_regdomain) + - src_regd->n_reg_rules * sizeof(struct ieee80211_reg_rule); - - regd = kzalloc(size_of_regd, GFP_KERNEL); + regd = kzalloc(struct_size(regd, reg_rules, src_regd->n_reg_rules), + GFP_KERNEL); if (!regd) return ERR_PTR(-ENOMEM); @@ -948,12 +944,10 @@ static int regdb_query_country(const struct fwdb_header *db, unsigned int ptr = be16_to_cpu(country->coll_ptr) << 2; struct fwdb_collection *coll = (void *)((u8 *)db + ptr); struct ieee80211_regdomain *regdom; - unsigned int size_of_regd, i; - - size_of_regd = sizeof(struct ieee80211_regdomain) + - coll->n_rules * sizeof(struct ieee80211_reg_rule); + unsigned int i; - regdom = kzalloc(size_of_regd, GFP_KERNEL); + regdom = kzalloc(struct_size(regdom, reg_rules, coll->n_rules), + GFP_KERNEL); if (!regdom) return -ENOMEM; @@ -1450,7 +1444,7 @@ static struct ieee80211_regdomain * regdom_intersect(const struct ieee80211_regdomain *rd1, const struct ieee80211_regdomain *rd2) { - int r, size_of_regd; + int r; unsigned int x, y; unsigned int num_rules = 0; const struct ieee80211_reg_rule *rule1, *rule2; @@ -1481,10 +1475,7 @@ regdom_intersect(const struct ieee80211_regdomain *rd1, if (!num_rules) return NULL; - size_of_regd = sizeof(struct ieee80211_regdomain) + - num_rules * sizeof(struct ieee80211_reg_rule); - - rd = kzalloc(size_of_regd, GFP_KERNEL); + rd = kzalloc(struct_size(rd, reg_rules, num_rules), GFP_KERNEL); if (!rd) return NULL; -- cgit v1.2.3 From 391d132cbedbe9b454f8a12544cb12b0df8d4e5b Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 3 Apr 2019 10:37:44 -0500 Subject: nl80211: Use struct_size() in kzalloc() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable size_of_regd is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'net') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index e7984f025bc7..64f191244c67 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3876,8 +3876,7 @@ static struct cfg80211_acl_data *parse_acl_data(struct wiphy *wiphy, if (n_entries > wiphy->max_acl_mac_addrs) return ERR_PTR(-ENOTSUPP); - acl = kzalloc(sizeof(*acl) + (sizeof(struct mac_address) * n_entries), - GFP_KERNEL); + acl = kzalloc(struct_size(acl, mac_addrs, n_entries), GFP_KERNEL); if (!acl) return ERR_PTR(-ENOMEM); @@ -6916,7 +6915,7 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) struct nlattr *nl_reg_rule; char *alpha2; int rem_reg_rules, r; - u32 num_rules = 0, rule_idx = 0, size_of_regd; + u32 num_rules = 0, rule_idx = 0; enum nl80211_dfs_regions dfs_region = NL80211_DFS_UNSET; struct ieee80211_regdomain *rd; @@ -6941,10 +6940,7 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) if (!reg_is_valid_request(alpha2)) return -EINVAL; - size_of_regd = sizeof(struct ieee80211_regdomain) + - num_rules * sizeof(struct ieee80211_reg_rule); - - rd = kzalloc(size_of_regd, GFP_KERNEL); + rd = kzalloc(struct_size(rd, reg_rules, num_rules), GFP_KERNEL); if (!rd) return -ENOMEM; -- cgit v1.2.3 From dbd50a851c50bb95e457c99306eff298afd3d731 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 8 Apr 2019 14:39:11 +0200 Subject: mac80211: only allocate one queue when using iTXQs There's no need to allocate than one queue in the iTXQs case now that we no longer use ndo_select_queue to assign the AC. Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'net') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 6e1b031535d5..94459b2b3d2a 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1763,13 +1763,13 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, txq_size += sizeof(struct txq_info) + local->hw.txq_data_size; - if (local->ops->wake_tx_queue) + if (local->ops->wake_tx_queue) { if_setup = ieee80211_if_setup_no_queue; - else + } else { if_setup = ieee80211_if_setup; - - if (local->hw.queues >= IEEE80211_NUM_ACS) - txqs = IEEE80211_NUM_ACS; + if (local->hw.queues >= IEEE80211_NUM_ACS) + txqs = IEEE80211_NUM_ACS; + } ndev = alloc_netdev_mqs(size + txq_size, name, name_assign_type, -- cgit v1.2.3 From e96d1cd2635c05efdd01b4eafcfc50c22c40751f Mon Sep 17 00:00:00 2001 From: Ashok Raj Nagarajan Date: Fri, 29 Mar 2019 16:18:21 +0530 Subject: cfg80211: Add support to set tx power for a station associated This patch adds support to set transmit power setting type and transmit power level attributes to NL80211_CMD_SET_STATION in order to facilitate adjusting the transmit power level of a station associated to the AP. The added attributes allow selection of automatic and limited transmit power level, with the level defined in dBm format. Co-developed-by: Balaji Pothunoori Signed-off-by: Ashok Raj Nagarajan Signed-off-by: Balaji Pothunoori Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 22 ++++++++++++++++++++++ include/uapi/linux/nl80211.h | 15 +++++++++++++++ net/wireless/nl80211.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 80 insertions(+) (limited to 'net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 2b039802ae2e..2ea04e94b522 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -975,6 +975,27 @@ enum station_parameters_apply_mask { STATION_PARAM_APPLY_UAPSD = BIT(0), STATION_PARAM_APPLY_CAPABILITY = BIT(1), STATION_PARAM_APPLY_PLINK_STATE = BIT(2), + STATION_PARAM_APPLY_STA_TXPOWER = BIT(3), +}; + +/** + * struct sta_txpwr - station txpower configuration + * + * Used to configure txpower for station. + * + * @power: tx power (in dBm) to be used for sending data traffic. If tx power + * is not provided, the default per-interface tx power setting will be + * overriding. Driver should be picking up the lowest tx power, either tx + * power per-interface or per-station. + * @type: In particular if TPC %type is NL80211_TX_POWER_LIMITED then tx power + * will be less than or equal to specified from userspace, whereas if TPC + * %type is NL80211_TX_POWER_AUTOMATIC then it indicates default tx power. + * NL80211_TX_POWER_FIXED is not a valid configuration option for + * per peer TPC. + */ +struct sta_txpwr { + s16 power; + enum nl80211_tx_power_setting type; }; /** @@ -1049,6 +1070,7 @@ struct station_parameters { const struct ieee80211_he_cap_elem *he_capa; u8 he_capa_len; u16 airtime_weight; + struct sta_txpwr txpwr; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e75615bf4453..25f70dd2b583 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2315,6 +2315,15 @@ enum nl80211_commands { * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime * scheduler. * + * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for + * station associated with the AP. See &enum nl80211_tx_power_setting for + * possible values. + * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This + * allows to set Tx power for a station. If this attribute is not included, + * the default per-interface tx power setting will be overriding. Driver + * should be picking up the lowest tx power, either tx power per-interface + * or per-station. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2765,6 +2774,8 @@ enum nl80211_attrs { NL80211_ATTR_PEER_MEASUREMENTS, NL80211_ATTR_AIRTIME_WEIGHT, + NL80211_ATTR_STA_TX_POWER_SETTING, + NL80211_ATTR_STA_TX_POWER, /* add attributes here, update the policy in nl80211.c */ @@ -5391,6 +5402,9 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports * filtering of sched scan results using band specific RSSI thresholds. * + * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power + * to a station. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5434,6 +5448,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_AP_PMKSA_CACHING, NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, NL80211_EXT_FEATURE_EXT_KEY_ID, + NL80211_EXT_FEATURE_STA_TX_PWR, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 64f191244c67..0524a6fb84ad 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -331,6 +331,11 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { .len = NL80211_MAX_SUPP_RATES }, [NL80211_ATTR_STA_PLINK_ACTION] = NLA_POLICY_MAX(NLA_U8, NUM_NL80211_PLINK_ACTIONS - 1), + [NL80211_ATTR_STA_TX_POWER_SETTING] = + NLA_POLICY_RANGE(NLA_U8, + NL80211_TX_POWER_AUTOMATIC, + NL80211_TX_POWER_FIXED), + [NL80211_ATTR_STA_TX_POWER] = { .type = NLA_S16 }, [NL80211_ATTR_STA_VLAN] = { .type = NLA_U32 }, [NL80211_ATTR_MNTR_FLAGS] = { /* NLA_NESTED can't be empty */ }, [NL80211_ATTR_MESH_ID] = { .type = NLA_BINARY, @@ -5420,6 +5425,36 @@ static int nl80211_set_station_tdls(struct genl_info *info, return nl80211_parse_sta_wme(info, params); } +static int nl80211_parse_sta_txpower_setting(struct genl_info *info, + struct station_parameters *params) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + int idx; + + if (info->attrs[NL80211_ATTR_STA_TX_POWER_SETTING]) { + if (!rdev->ops->set_tx_power || + !wiphy_ext_feature_isset(&rdev->wiphy, + NL80211_EXT_FEATURE_STA_TX_PWR)) + return -EOPNOTSUPP; + + idx = NL80211_ATTR_STA_TX_POWER_SETTING; + params->txpwr.type = nla_get_u8(info->attrs[idx]); + + if (params->txpwr.type == NL80211_TX_POWER_LIMITED) { + idx = NL80211_ATTR_STA_TX_POWER; + + if (info->attrs[idx]) + params->txpwr.power = + nla_get_s16(info->attrs[idx]); + else + return -EINVAL; + } + params->sta_modify_mask |= STATION_PARAM_APPLY_STA_TXPOWER; + } + + return 0; +} + static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -5513,6 +5548,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) NL80211_EXT_FEATURE_AIRTIME_FAIRNESS)) return -EOPNOTSUPP; + err = nl80211_parse_sta_txpower_setting(info, ¶ms); + if (err) + return err; + /* Include parameters for TDLS peer (will check later) */ err = nl80211_set_station_tdls(info, ¶ms); if (err) @@ -5650,6 +5689,10 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) NL80211_EXT_FEATURE_AIRTIME_FAIRNESS)) return -EOPNOTSUPP; + err = nl80211_parse_sta_txpower_setting(info, ¶ms); + if (err) + return err; + err = nl80211_parse_sta_channel_info(info, ¶ms); if (err) return err; -- cgit v1.2.3 From ba905bf432f662cb907fd692a4f160e612c0408b Mon Sep 17 00:00:00 2001 From: Ashok Raj Nagarajan Date: Fri, 29 Mar 2019 16:19:09 +0530 Subject: mac80211: store tx power value from user to station This patch introduce a new driver callback drv_sta_set_txpwr. This API will copy the transmit power value passed from user space and call the driver callback to set the tx power for the station. Co-developed-by: Balaji Pothunoori Signed-off-by: Ashok Raj Nagarajan Signed-off-by: Balaji Pothunoori Signed-off-by: Johannes Berg --- include/net/mac80211.h | 22 ++++++++++++++++++++++ net/mac80211/cfg.c | 9 +++++++++ net/mac80211/driver-ops.c | 21 +++++++++++++++++++++ net/mac80211/driver-ops.h | 5 +++++ net/mac80211/trace.h | 30 ++++++++++++++++++++++++++++++ 5 files changed, 87 insertions(+) (limited to 'net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c10abca55fde..d66fbfe8d55d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1889,6 +1889,24 @@ struct ieee80211_sta_rates { } rate[IEEE80211_TX_RATE_TABLE_SIZE]; }; +/** + * struct ieee80211_sta_txpwr - station txpower configuration + * + * Used to configure txpower for station. + * + * @power: indicates the tx power, in dBm, to be used when sending data frames + * to the STA. + * @type: In particular if TPC %type is NL80211_TX_POWER_LIMITED then tx power + * will be less than or equal to specified from userspace, whereas if TPC + * %type is NL80211_TX_POWER_AUTOMATIC then it indicates default tx power. + * NL80211_TX_POWER_FIXED is not a valid configuration option for + * per peer TPC. + */ +struct ieee80211_sta_txpwr { + s16 power; + enum nl80211_tx_power_setting type; +}; + /** * struct ieee80211_sta - station table entry * @@ -1975,6 +1993,7 @@ struct ieee80211_sta { bool support_p2p_ps; u16 max_rc_amsdu_len; u16 max_tid_amsdu_len[IEEE80211_NUM_TIDS]; + struct ieee80211_sta_txpwr txpwr; struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1]; @@ -3800,6 +3819,9 @@ struct ieee80211_ops { #endif void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); + int (*sta_set_txpwr)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, enum ieee80211_sta_state old_state, diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 14bbb7e8ad0e..ba6e4080d63d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1457,6 +1457,15 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (params->listen_interval >= 0) sta->listen_interval = params->listen_interval; + if (params->sta_modify_mask & STATION_PARAM_APPLY_STA_TXPOWER) { + sta->sta.txpwr.type = params->txpwr.type; + if (params->txpwr.type == NL80211_TX_POWER_LIMITED) + sta->sta.txpwr.power = params->txpwr.power; + ret = drv_sta_set_txpwr(local, sdata, sta); + if (ret) + return ret; + } + if (params->supported_rates) { ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef, sband, params->supported_rates, diff --git a/net/mac80211/driver-ops.c b/net/mac80211/driver-ops.c index bb886e7db47f..839c0022a29c 100644 --- a/net/mac80211/driver-ops.c +++ b/net/mac80211/driver-ops.c @@ -138,6 +138,27 @@ int drv_sta_state(struct ieee80211_local *local, return ret; } +__must_check +int drv_sta_set_txpwr(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, + struct sta_info *sta) +{ + int ret = -EOPNOTSUPP; + + might_sleep(); + + sdata = get_bss_sdata(sdata); + if (!check_sdata_in_driver(sdata)) + return -EIO; + + trace_drv_sta_set_txpwr(local, sdata, &sta->sta); + if (local->ops->sta_set_txpwr) + ret = local->ops->sta_set_txpwr(&local->hw, &sdata->vif, + &sta->sta); + trace_drv_return_int(local, ret); + return ret; +} + void drv_sta_rc_update(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, struct ieee80211_sta *sta, u32 changed) diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 28d022a3eee3..62edfa6a73ed 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -529,6 +529,11 @@ int drv_sta_state(struct ieee80211_local *local, enum ieee80211_sta_state old_state, enum ieee80211_sta_state new_state); +__must_check +int drv_sta_set_txpwr(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, + struct sta_info *sta); + void drv_sta_rc_update(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, struct ieee80211_sta *sta, u32 changed); diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 8ba70d26b82e..3bb4459b52c7 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -828,6 +828,36 @@ TRACE_EVENT(drv_sta_state, ) ); +TRACE_EVENT(drv_sta_set_txpwr, + TP_PROTO(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, + struct ieee80211_sta *sta), + + TP_ARGS(local, sdata, sta), + + TP_STRUCT__entry( + LOCAL_ENTRY + VIF_ENTRY + STA_ENTRY + __field(s16, txpwr) + __field(u8, type) + ), + + TP_fast_assign( + LOCAL_ASSIGN; + VIF_ASSIGN; + STA_ASSIGN; + __entry->txpwr = sta->txpwr.power; + __entry->type = sta->txpwr.type; + ), + + TP_printk( + LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " txpwr: %d type %d", + LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, + __entry->txpwr, __entry->type + ) +); + TRACE_EVENT(drv_sta_rc_update, TP_PROTO(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, -- cgit v1.2.3 From 5809a5d54bb9eda3a388b5a712657970c2cb9f8e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 11 Apr 2019 11:59:50 +0300 Subject: cfg80211: don't pass pointer to pointer unnecessarily The cfg80211_merge_profile() and ieee802_11_find_bssid_profile() are a bit cleaner if we just pass the merged_ie pointer instead of a pointer to the pointer. This isn't a functional change, it's just a clean up. Signed-off-by: Dan Carpenter Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 +- net/mac80211/util.c | 8 ++++---- net/wireless/scan.c | 8 ++++---- 3 files changed, 9 insertions(+), 9 deletions(-) (limited to 'net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 2ea04e94b522..944de1802210 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -5578,7 +5578,7 @@ bool cfg80211_is_element_inherited(const struct element *element, size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, const struct element *mbssid_elem, const struct element *sub_elem, - u8 **merged_ie, size_t max_copy_len); + u8 *merged_ie, size_t max_copy_len); /** * enum cfg80211_bss_frame_type - frame type that the BSS data came from diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 99dd58454592..cba4633cd6cf 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1258,7 +1258,7 @@ static size_t ieee802_11_find_bssid_profile(const u8 *start, size_t len, struct ieee802_11_elems *elems, u8 *transmitter_bssid, u8 *bss_bssid, - u8 **nontransmitted_profile) + u8 *nontransmitted_profile) { const struct element *elem, *sub; size_t profile_len = 0; @@ -1290,7 +1290,7 @@ static size_t ieee802_11_find_bssid_profile(const u8 *start, size_t len, continue; } - memset(*nontransmitted_profile, 0, len); + memset(nontransmitted_profile, 0, len); profile_len = cfg80211_merge_profile(start, len, elem, sub, @@ -1299,7 +1299,7 @@ static size_t ieee802_11_find_bssid_profile(const u8 *start, size_t len, /* found a Nontransmitted BSSID Profile */ index = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, - *nontransmitted_profile, + nontransmitted_profile, profile_len); if (!index || index[1] < 1 || index[2] == 0) { /* Invalid MBSSID Index element */ @@ -1341,7 +1341,7 @@ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, ieee802_11_find_bssid_profile(start, len, elems, transmitter_bssid, bss_bssid, - &nontransmitted_profile); + nontransmitted_profile); non_inherit = cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, nontransmitted_profile, diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 878c867f3f7d..85dd3342d2c4 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1502,7 +1502,7 @@ static const struct element size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, const struct element *mbssid_elem, const struct element *sub_elem, - u8 **merged_ie, size_t max_copy_len) + u8 *merged_ie, size_t max_copy_len) { size_t copied_len = sub_elem->datalen; const struct element *next_mbssid; @@ -1510,7 +1510,7 @@ size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, if (sub_elem->datalen > max_copy_len) return 0; - memcpy(*merged_ie, sub_elem->data, sub_elem->datalen); + memcpy(merged_ie, sub_elem->data, sub_elem->datalen); while ((next_mbssid = cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, @@ -1519,7 +1519,7 @@ size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, if (copied_len + next_sub->datalen > max_copy_len) break; - memcpy(*merged_ie + copied_len, next_sub->data, + memcpy(merged_ie + copied_len, next_sub->data, next_sub->datalen); copied_len += next_sub->datalen; } @@ -1588,7 +1588,7 @@ static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, profile_len = cfg80211_merge_profile(ie, ielen, elem, sub, - &profile, + profile, ielen); /* found a Nontransmitted BSSID Profile */ -- cgit v1.2.3 From 622fce81280aadb277dd3fc55c676b4bdc3e0527 Mon Sep 17 00:00:00 2001 From: Alexander Wetzel Date: Mon, 22 Apr 2019 23:34:11 +0200 Subject: mac80211: Fix Extended Key ID auto activation Only enable Extended Key ID support for drivers which are not supporting crypto offload and also do not support A-MPDU. While any driver using SW crypto from mac80211 is generally able to also support Extended Key ID these drivers are likely to mix keyIDs in AMPDUs when rekeying. According to IEEE 802.11-2016 "9.7.3 A-MPDU contents" this is not allowed. Signed-off-by: Alexander Wetzel [reword comment a bit, move ! into logic expression] Signed-off-by: Johannes Berg --- net/mac80211/main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'net') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 5d6b93050c0b..e56650a9838e 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1051,7 +1051,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) } } - if (!local->ops->set_key || + /* Enable Extended Key IDs when driver allowed it, or when it + * supports neither HW crypto nor A-MPDUs + */ + if ((!local->ops->set_key && + !ieee80211_hw_check(hw, AMPDU_AGGREGATION)) || ieee80211_hw_check(&local->hw, EXT_KEY_ID_NATIVE)) wiphy_ext_feature_set(local->hw.wiphy, NL80211_EXT_FEATURE_EXT_KEY_ID); -- cgit v1.2.3 From a680fe468df7550ed18fbcae30e382252fdc35c6 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 17 Apr 2019 09:34:40 +0300 Subject: nl80211: do a struct assignment to radar_chandef instead of memcpy() We are copying one entire structure to another of the same type in nl80211_notify_radar_detection, so it's simpler and safer to do a struct assignment instead of memcpy(). Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 0524a6fb84ad..5dfc4dba9e56 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -8181,7 +8181,7 @@ static int nl80211_notify_radar_detection(struct sk_buff *skb, cfg80211_sched_dfs_chan_update(rdev); - memcpy(&rdev->radar_chandef, &chandef, sizeof(chandef)); + rdev->radar_chandef = chandef; /* Propagate this notification to other radios as well */ queue_work(cfg80211_wq, &rdev->propagate_radar_detect_wk); -- cgit v1.2.3 From 387bc002250b31cf8012b736e482c9f65cbf7dd5 Mon Sep 17 00:00:00 2001 From: Alexander Wetzel Date: Wed, 24 Apr 2019 19:32:46 +0200 Subject: mac80211: Set CAN_REPLACE_PTK0 for SW crypto only drivers Mac80211 SW crypto handles replacing PTK keys correctly. Don't trigger needless warnings or workarounds when the driver can only use the known good SW crypto provided by mac80211. Signed-off-by: Alexander Wetzel Signed-off-by: Johannes Berg --- net/mac80211/main.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'net') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index e56650a9838e..2b608044ae23 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1060,6 +1060,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) wiphy_ext_feature_set(local->hw.wiphy, NL80211_EXT_FEATURE_EXT_KEY_ID); + /* Mac80211 and therefore all cards only using SW crypto are able to + * handle PTK rekeys correctly + */ + if (!local->ops->set_key) + wiphy_ext_feature_set(local->hw.wiphy, + NL80211_EXT_FEATURE_CAN_REPLACE_PTK0); + /* * Calculate scan IE length -- we need this to alloc * memory and to subtract from the driver limit. It -- cgit v1.2.3 From 5ab92e7fe49ad74293b50fb9e6f25be5521e2f68 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 11 Apr 2019 13:47:24 -0700 Subject: cfg80211: add support to probe unexercised mesh link Adding support to allow mesh HWMP to measure link metrics on unexercised direct mesh path by sending some data frames to other mesh points which are not currently selected as a primary traffic path but only 1 hop away. The absence of the primary path to the chosen node makes it necessary to apply some form of marking on a chosen packet stream so that the packets can be properly steered to the selected node for testing, and not by the regular mesh path lookup. Tested-by: Pradeep Kumar Chitrapu Signed-off-by: Rajkumar Manoharan Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 5 +++++ include/uapi/linux/nl80211.h | 17 ++++++++++++++++ net/wireless/nl80211.c | 48 ++++++++++++++++++++++++++++++++++++++++++++ net/wireless/rdev-ops.h | 13 ++++++++++++ net/wireless/trace.h | 18 +++++++++++++++++ 5 files changed, 101 insertions(+) (limited to 'net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 944de1802210..298301525f9f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3501,6 +3501,9 @@ struct cfg80211_update_owe_info { * @update_owe_info: Provide updated OWE info to driver. Driver implementing SME * but offloading OWE processing to the user space will get the updated * DH IE through this interface. + * + * @probe_mesh_link: Probe direct Mesh peer's link quality by sending data frame + * and overrule HWMP path selection algorithm. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -3817,6 +3820,8 @@ struct cfg80211_ops { struct cfg80211_pmsr_request *request); int (*update_owe_info)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_update_owe_info *owe_info); + int (*probe_mesh_link)(struct wiphy *wiphy, struct net_device *dev, + const u8 *buf, size_t len); }; /* diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 25f70dd2b583..6f09d1500960 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1070,6 +1070,21 @@ * OWE AKM by the host drivers that implement SME but rely * on the user space for the cryptographic/DH IE processing in AP mode. * + * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric + * refreshing, is that from one mesh point we be able to send some data + * frames to other mesh points which are not currently selected as a + * primary traffic path, but which are only 1 hop away. The absence of + * the primary path to the chosen node makes it necessary to apply some + * form of marking on a chosen packet stream so that the packets can be + * properly steered to the selected node for testing, and not by the + * regular mesh path lookup. Further, the packets must be of type data + * so that the rate control (often embedded in firmware) is used for + * rate selection. + * + * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh + * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame + * content. The frame is ethernet data. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1292,6 +1307,8 @@ enum nl80211_commands { NL80211_CMD_UPDATE_OWE_INFO, + NL80211_CMD_PROBE_MESH_LINK, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 5dfc4dba9e56..3aecdd3d5b07 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -13404,6 +13404,47 @@ static int nl80211_update_owe_info(struct sk_buff *skb, struct genl_info *info) return rdev_update_owe_info(rdev, dev, &owe_info); } +static int nl80211_probe_mesh_link(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct station_info sinfo = {}; + const u8 *buf; + size_t len; + u8 *dest; + int err; + + if (!rdev->ops->probe_mesh_link || !rdev->ops->get_station) + return -EOPNOTSUPP; + + if (!info->attrs[NL80211_ATTR_MAC] || + !info->attrs[NL80211_ATTR_FRAME]) { + GENL_SET_ERR_MSG(info, "Frame or MAC missing"); + return -EINVAL; + } + + if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + + dest = nla_data(info->attrs[NL80211_ATTR_MAC]); + buf = nla_data(info->attrs[NL80211_ATTR_FRAME]); + len = nla_len(info->attrs[NL80211_ATTR_FRAME]); + + if (len < sizeof(struct ethhdr)) + return -EINVAL; + + if (!ether_addr_equal(buf, dest) || is_multicast_ether_addr(buf) || + !ether_addr_equal(buf + ETH_ALEN, dev->dev_addr)) + return -EINVAL; + + err = rdev_get_station(rdev, dev, dest, &sinfo); + if (err) + return err; + + return rdev_probe_mesh_link(rdev, dev, dest, buf, len); +} + #define NL80211_FLAG_NEED_WIPHY 0x01 #define NL80211_FLAG_NEED_NETDEV 0x02 #define NL80211_FLAG_NEED_RTNL 0x04 @@ -14241,6 +14282,13 @@ static const struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_PROBE_MESH_LINK, + .doit = nl80211_probe_mesh_link, + .flags = GENL_UNS_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_family nl80211_fam __ro_after_init = { diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index 18437a9deb54..e853a4fe6f97 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -1286,4 +1286,17 @@ static inline int rdev_update_owe_info(struct cfg80211_registered_device *rdev, return ret; } +static inline int +rdev_probe_mesh_link(struct cfg80211_registered_device *rdev, + struct net_device *dev, const u8 *dest, + const void *buf, size_t len) +{ + int ret; + + trace_rdev_probe_mesh_link(&rdev->wiphy, dev, dest, buf, len); + ret = rdev->ops->probe_mesh_link(&rdev->wiphy, dev, buf, len); + trace_rdev_return_int(&rdev->wiphy, ret); + return ret; +} + #endif /* __CFG80211_RDEV_OPS */ diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 488ef2ce8231..2abfff925aac 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -3421,6 +3421,24 @@ TRACE_EVENT(cfg80211_update_owe_info_event, WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer)) ); +TRACE_EVENT(rdev_probe_mesh_link, + TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, + const u8 *dest, const u8 *buf, size_t len), + TP_ARGS(wiphy, netdev, dest, buf, len), + TP_STRUCT__entry( + WIPHY_ENTRY + NETDEV_ENTRY + MAC_ENTRY(dest) + ), + TP_fast_assign( + WIPHY_ASSIGN; + NETDEV_ASSIGN; + MAC_ASSIGN(dest, dest); + ), + TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " MAC_PR_FMT, + WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(dest)) +); + #endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */ #undef TRACE_INCLUDE_PATH -- cgit v1.2.3 From 060167729a78d626abaee1a0ebb64b252374426e Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 11 Apr 2019 13:47:25 -0700 Subject: mac80211: add option for setting control flags Allows setting of control flags of skb cb - if needed - when calling ieee80211_subif_start_xmit(). Tested-by: Pradeep Kumar Chitrapu Signed-off-by: Rajkumar Manoharan Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 3 ++- net/mac80211/tdls.c | 2 +- net/mac80211/tx.c | 18 +++++++++++------- 3 files changed, 14 insertions(+), 9 deletions(-) (limited to 'net') diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5a0dedd31266..9b0190eaff1e 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1761,7 +1761,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev); void __ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev, - u32 info_flags); + u32 info_flags, + u32 ctrl_flags); void ieee80211_purge_tx_queue(struct ieee80211_hw *hw, struct sk_buff_head *skbs); struct sk_buff * diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c index d30690d79a58..24c37f91ca46 100644 --- a/net/mac80211/tdls.c +++ b/net/mac80211/tdls.c @@ -1056,7 +1056,7 @@ ieee80211_tdls_prep_mgmt_packet(struct wiphy *wiphy, struct net_device *dev, /* disable bottom halves when entering the Tx path */ local_bh_disable(); - __ieee80211_subif_start_xmit(skb, dev, flags); + __ieee80211_subif_start_xmit(skb, dev, flags, 0); local_bh_enable(); return ret; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 9426bcce95e7..9e3678675f3b 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2432,6 +2432,7 @@ static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata, * @sdata: virtual interface to build the header for * @skb: the skb to build the header in * @info_flags: skb flags to set + * @ctrl_flags: info control flags to set * * This function takes the skb with 802.3 header and reformats the header to * the appropriate IEEE 802.11 header based on which interface the packet is @@ -2447,7 +2448,7 @@ static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata, */ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, u32 info_flags, - struct sta_info *sta) + struct sta_info *sta, u32 ctrl_flags) { struct ieee80211_local *local = sdata->local; struct ieee80211_tx_info *info; @@ -2824,6 +2825,7 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, info->flags = info_flags; info->ack_frame_id = info_id; info->band = band; + info->control.flags = ctrl_flags; return skb; free: @@ -3804,7 +3806,8 @@ EXPORT_SYMBOL(ieee80211_txq_schedule_end); void __ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev, - u32 info_flags) + u32 info_flags, + u32 ctrl_flags) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = sdata->local; @@ -3878,7 +3881,8 @@ void __ieee80211_subif_start_xmit(struct sk_buff *skb, skb->prev = NULL; skb->next = NULL; - skb = ieee80211_build_hdr(sdata, skb, info_flags, sta); + skb = ieee80211_build_hdr(sdata, skb, info_flags, + sta, ctrl_flags); if (IS_ERR(skb)) goto out; @@ -4018,9 +4022,9 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, __skb_queue_head_init(&queue); ieee80211_convert_to_unicast(skb, dev, &queue); while ((skb = __skb_dequeue(&queue))) - __ieee80211_subif_start_xmit(skb, dev, 0); + __ieee80211_subif_start_xmit(skb, dev, 0, 0); } else { - __ieee80211_subif_start_xmit(skb, dev, 0); + __ieee80211_subif_start_xmit(skb, dev, 0, 0); } return NETDEV_TX_OK; @@ -4045,7 +4049,7 @@ ieee80211_build_data_template(struct ieee80211_sub_if_data *sdata, goto out; } - skb = ieee80211_build_hdr(sdata, skb, info_flags, sta); + skb = ieee80211_build_hdr(sdata, skb, info_flags, sta, 0); if (IS_ERR(skb)) goto out; @@ -5082,7 +5086,7 @@ int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev, skb_reset_mac_header(skb); local_bh_disable(); - __ieee80211_subif_start_xmit(skb, skb->dev, flags); + __ieee80211_subif_start_xmit(skb, skb->dev, flags, 0); local_bh_enable(); return 0; -- cgit v1.2.3 From 8828f81ad4a2f4e89ebe6e7793c06ed767c31d53 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 11 Apr 2019 13:47:26 -0700 Subject: mac80211: probe unexercised mesh links The requirement for mesh link metric refreshing, is that from one mesh point we be able to send some data frames to other mesh points which are not currently selected as a primary traffic path, but which are only 1 hop away. The absence of the primary path to the chosen node makes it necessary to apply some form of marking on a chosen packet stream so that the packets can be properly steered to the selected node for testing, and not by the regular mesh path lookup. Tested-by: Pradeep Kumar Chitrapu Signed-off-by: Rajkumar Manoharan Signed-off-by: Johannes Berg --- include/net/mac80211.h | 2 ++ net/mac80211/cfg.c | 1 + net/mac80211/ieee80211_i.h | 2 ++ net/mac80211/mesh_hwmp.c | 4 ++++ net/mac80211/tx.c | 36 ++++++++++++++++++++++++++++++++++++ 5 files changed, 45 insertions(+) (limited to 'net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d66fbfe8d55d..76a443f32fc8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -807,6 +807,7 @@ enum mac80211_tx_info_flags { * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame * @IEEE80211_TX_CTRL_FAST_XMIT: This frame is going through the fast_xmit path + * @IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP: This frame skips mesh path lookup * * These flags are used in tx_info->control.flags. */ @@ -816,6 +817,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTRL_RATE_INJECT = BIT(2), IEEE80211_TX_CTRL_AMSDU = BIT(3), IEEE80211_TX_CTRL_FAST_XMIT = BIT(4), + IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP = BIT(5), }; /* diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index ba6e4080d63d..52e6a091b7e4 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -4035,4 +4035,5 @@ const struct cfg80211_ops mac80211_config_ops = { .get_ftm_responder_stats = ieee80211_get_ftm_responder_stats, .start_pmsr = ieee80211_start_pmsr, .abort_pmsr = ieee80211_abort_pmsr, + .probe_mesh_link = ieee80211_probe_mesh_link, }; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 9b0190eaff1e..073a8235ae1b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1779,6 +1779,8 @@ void ieee80211_clear_fast_xmit(struct sta_info *sta); int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev, const u8 *buf, size_t len, const u8 *dest, __be16 proto, bool unencrypted); +int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev, + const u8 *buf, size_t len); /* HT */ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 2c5929c0fa62..bf8e13cd5fd1 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -1135,6 +1135,10 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata, if (ieee80211_is_qos_nullfunc(hdr->frame_control)) return 0; + /* Allow injected packets to bypass mesh routing */ + if (info->control.flags & IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP) + return 0; + if (!mesh_nexthop_lookup(sdata, skb)) return 0; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 9e3678675f3b..8037384fc06e 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2607,6 +2607,13 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, goto free; } band = chanctx_conf->def.chan->band; + + /* For injected frames, fill RA right away as nexthop lookup + * will be skipped. + */ + if ((ctrl_flags & IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP) && + is_zero_ether_addr(hdr.addr1)) + memcpy(hdr.addr1, skb->data, ETH_ALEN); break; #endif case NL80211_IFTYPE_STATION: @@ -5091,3 +5098,32 @@ int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev, return 0; } + +int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev, + const u8 *buf, size_t len) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + struct sk_buff *skb; + + skb = dev_alloc_skb(local->hw.extra_tx_headroom + len + + 30 + /* header size */ + 18); /* 11s header size */ + if (!skb) + return -ENOMEM; + + skb_reserve(skb, local->hw.extra_tx_headroom); + skb_put_data(skb, buf, len); + + skb->dev = dev; + skb->protocol = htons(ETH_P_802_3); + skb_reset_network_header(skb); + skb_reset_mac_header(skb); + + local_bh_disable(); + __ieee80211_subif_start_xmit(skb, skb->dev, 0, + IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP); + local_bh_enable(); + + return 0; +} -- cgit v1.2.3