From 6fce983f9b3ef51d47e647b2cff15049ef803781 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Tue, 13 Dec 2016 11:03:49 +0000 Subject: ASoC: dwc: Fix PIO mode initialization We can no longer rely on the return value of devm_snd_dmaengine_pcm_register(...) to check if the DMA handle is declared in the DT. Previously this check activated PIO mode but currently dma_request_chan returns either a valid channel or -EPROBE_DEFER. In order to activate PIO mode check instead if the interrupt line is declared. This reflects better what is documented in the DT bindings (see Documentation/devicetree/bindings/sound/ designware-i2s.txt). Also, initialize use_pio variable which was never being set causing PIO mode to never work. Signed-off-by: Jose Abreu Signed-off-by: Mark Brown --- sound/soc/dwc/designware_i2s.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) (limited to 'sound') diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c index 2998954a1c74..bdf8398cbc81 100644 --- a/sound/soc/dwc/designware_i2s.c +++ b/sound/soc/dwc/designware_i2s.c @@ -681,22 +681,19 @@ static int dw_i2s_probe(struct platform_device *pdev) } if (!pdata) { - ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); - if (ret == -EPROBE_DEFER) { - dev_err(&pdev->dev, - "failed to register PCM, deferring probe\n"); - return ret; - } else if (ret) { - dev_err(&pdev->dev, - "Could not register DMA PCM: %d\n" - "falling back to PIO mode\n", ret); + if (irq >= 0) { ret = dw_pcm_register(pdev); - if (ret) { - dev_err(&pdev->dev, - "Could not register PIO PCM: %d\n", + dev->use_pio = true; + } else { + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, + 0); + dev->use_pio = false; + } + + if (ret) { + dev_err(&pdev->dev, "could not register pcm: %d\n", ret); - goto err_clk_disable; - } + goto err_clk_disable; } } -- cgit v1.2.3 From 1cab2a84f470e15ecc8e5143bfe9398c6e888032 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Tue, 20 Dec 2016 10:29:12 +0000 Subject: ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data Protect against corrupt firmware files by ensuring that the length we get for the data in a region actually lies within the available firmware file data buffer. Signed-off-by: Richard Fitzgerald Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 593b7d1aed46..d72ccef9e238 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -1551,7 +1551,7 @@ static int wm_adsp_load(struct wm_adsp *dsp) const struct wmfw_region *region; const struct wm_adsp_region *mem; const char *region_name; - char *file, *text; + char *file, *text = NULL; struct wm_adsp_buf *buf; unsigned int reg; int regions = 0; @@ -1700,10 +1700,21 @@ static int wm_adsp_load(struct wm_adsp *dsp) regions, le32_to_cpu(region->len), offset, region_name); + if ((pos + le32_to_cpu(region->len) + sizeof(*region)) > + firmware->size) { + adsp_err(dsp, + "%s.%d: %s region len %d bytes exceeds file length %zu\n", + file, regions, region_name, + le32_to_cpu(region->len), firmware->size); + ret = -EINVAL; + goto out_fw; + } + if (text) { memcpy(text, region->data, le32_to_cpu(region->len)); adsp_info(dsp, "%s: %s\n", file, text); kfree(text); + text = NULL; } if (reg) { @@ -1748,6 +1759,7 @@ out_fw: regmap_async_complete(regmap); wm_adsp_buf_free(&buf_list); release_firmware(firmware); + kfree(text); out: kfree(file); @@ -2233,6 +2245,17 @@ static int wm_adsp_load_coeff(struct wm_adsp *dsp) } if (reg) { + if ((pos + le32_to_cpu(blk->len) + sizeof(*blk)) > + firmware->size) { + adsp_err(dsp, + "%s.%d: %s region len %d bytes exceeds file length %zu\n", + file, blocks, region_name, + le32_to_cpu(blk->len), + firmware->size); + ret = -EINVAL; + goto out_fw; + } + buf = wm_adsp_buf_alloc(blk->data, le32_to_cpu(blk->len), &buf_list); -- cgit v1.2.3 From 4ee437fbf626b5ad756889d8bc0fcead3d66dde7 Mon Sep 17 00:00:00 2001 From: Caleb Crome Date: Tue, 3 Jan 2017 10:22:57 -0800 Subject: ASoC: fsl_ssi: set fifo watermark to more reliable value The fsl_ssi fifo watermark is by default set to 2 free spaces (i.e. activate DMA on FIFO when only 2 spaces are left.) This means the DMA must service the fifo within 2 audio samples, which is just not enough time for many use cases with high data rate. In many configurations the audio channel slips (causing l/r swap in stereo configurations, or channel slipping in multi-channel configurations). This patch gives more breathing room and allows the SSI to operate reliably by changing the fifio refill watermark to 8. There is no change in behavior for older chips (with an 8-deep fifo). Only the newer chips with a 15-deep fifo get the new behavior. I suspect a new fifo depth setting could be optimized on the older chips too, but I have not tested. Signed-off-by: Caleb Crome Reviewed-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_ssi.c | 74 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 53 insertions(+), 21 deletions(-) (limited to 'sound') diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 50349437d961..fde08660b63b 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -224,6 +224,12 @@ struct fsl_ssi_soc_data { * @dbg_stats: Debugging statistics * * @soc: SoC specific data + * + * @fifo_watermark: the FIFO watermark setting. Notifies DMA when + * there are @fifo_watermark or fewer words in TX fifo or + * @fifo_watermark or more empty words in RX fifo. + * @dma_maxburst: max number of words to transfer in one go. So far, + * this is always the same as fifo_watermark. */ struct fsl_ssi_private { struct regmap *regs; @@ -263,6 +269,9 @@ struct fsl_ssi_private { const struct fsl_ssi_soc_data *soc; struct device *dev; + + u32 fifo_watermark; + u32 dma_maxburst; }; /* @@ -1051,21 +1060,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, regmap_write(regs, CCSR_SSI_SRCR, srcr); regmap_write(regs, CCSR_SSI_SCR, scr); - /* - * Set the watermark for transmit FIFI 0 and receive FIFO 0. We don't - * use FIFO 1. We program the transmit water to signal a DMA transfer - * if there are only two (or fewer) elements left in the FIFO. Two - * elements equals one frame (left channel, right channel). This value, - * however, depends on the depth of the transmit buffer. - * - * We set the watermark on the same level as the DMA burstsize. For - * fiq it is probably better to use the biggest possible watermark - * size. - */ - if (ssi_private->use_dma) - wm = ssi_private->fifo_depth - 2; - else - wm = ssi_private->fifo_depth; + wm = ssi_private->fifo_watermark; regmap_write(regs, CCSR_SSI_SFCSR, CCSR_SSI_SFCSR_TFWM0(wm) | CCSR_SSI_SFCSR_RFWM0(wm) | @@ -1373,12 +1368,8 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, dev_dbg(&pdev->dev, "could not get baud clock: %ld\n", PTR_ERR(ssi_private->baudclk)); - /* - * We have burstsize be "fifo_depth - 2" to match the SSI - * watermark setting in fsl_ssi_startup(). - */ - ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2; - ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2; + ssi_private->dma_params_tx.maxburst = ssi_private->dma_maxburst; + ssi_private->dma_params_rx.maxburst = ssi_private->dma_maxburst; ssi_private->dma_params_tx.addr = ssi_private->ssi_phys + CCSR_SSI_STX0; ssi_private->dma_params_rx.addr = ssi_private->ssi_phys + CCSR_SSI_SRX0; @@ -1543,6 +1534,47 @@ static int fsl_ssi_probe(struct platform_device *pdev) /* Older 8610 DTs didn't have the fifo-depth property */ ssi_private->fifo_depth = 8; + /* + * Set the watermark for transmit FIFO 0 and receive FIFO 0. We don't + * use FIFO 1 but set the watermark appropriately nontheless. + * We program the transmit water to signal a DMA transfer + * if there are N elements left in the FIFO. For chips with 15-deep + * FIFOs, set watermark to 8. This allows the SSI to operate at a + * high data rate without channel slipping. Behavior is unchanged + * for the older chips with a fifo depth of only 8. A value of 4 + * might be appropriate for the older chips, but is left at + * fifo_depth-2 until sombody has a chance to test. + * + * We set the watermark on the same level as the DMA burstsize. For + * fiq it is probably better to use the biggest possible watermark + * size. + */ + switch (ssi_private->fifo_depth) { + case 15: + /* + * 2 samples is not enough when running at high data + * rates (like 48kHz @ 16 bits/channel, 16 channels) + * 8 seems to split things evenly and leave enough time + * for the DMA to fill the FIFO before it's over/under + * run. + */ + ssi_private->fifo_watermark = 8; + ssi_private->dma_maxburst = 8; + break; + case 8: + default: + /* + * maintain old behavior for older chips. + * Keeping it the same because I don't have an older + * board to test with. + * I suspect this could be changed to be something to + * leave some more space in the fifo. + */ + ssi_private->fifo_watermark = ssi_private->fifo_depth - 2; + ssi_private->dma_maxburst = ssi_private->fifo_depth - 2; + break; + } + dev_set_drvdata(&pdev->dev, ssi_private); if (ssi_private->soc->imx) { -- cgit v1.2.3 From 9f169b9f52a4afccdab7a7d2311b0c53a78a1e6b Mon Sep 17 00:00:00 2001 From: Patrick Lai Date: Sat, 31 Dec 2016 22:44:39 -0800 Subject: ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused When multiple front-ends are using the same back-end, putting state of a front-end to STOP state upon receiving pause command will result in backend stream getting released by DPCM framework unintentionally. In order to avoid backend to be released when another active front-end stream is present, put the stream state to PAUSED state instead of STOP state. Signed-off-by: Patrick Lai Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index e7a1eaa2772f..6aba14009c92 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2184,9 +2184,11 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: fe->dpcm[stream].state = SND_SOC_DPCM_STATE_STOP; break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PAUSED; + break; } out: -- cgit v1.2.3