// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2023 ARM Ltd. */ #include #include #include #include static inline bool mm_is_user(struct mm_struct *mm) { /* * Don't attempt to apply the contig bit to kernel mappings, because * dynamically adding/removing the contig bit can cause page faults. * These racing faults are ok for user space, since they get serialized * on the PTL. But kernel mappings can't tolerate faults. */ if (unlikely(mm_is_efi(mm))) return false; return mm != &init_mm; } static inline pte_t *contpte_align_down(pte_t *ptep) { return PTR_ALIGN_DOWN(ptep, sizeof(*ptep) * CONT_PTES); } static void contpte_try_unfold_partial(struct mm_struct *mm, unsigned long addr, pte_t *ptep, unsigned int nr) { /* * Unfold any partially covered contpte block at the beginning and end * of the range. */ if (ptep != contpte_align_down(ptep) || nr < CONT_PTES) contpte_try_unfold(mm, addr, ptep, __ptep_get(ptep)); if (ptep + nr != contpte_align_down(ptep + nr)) { unsigned long last_addr = addr + PAGE_SIZE * (nr - 1); pte_t *last_ptep = ptep + nr - 1; contpte_try_unfold(mm, last_addr, last_ptep, __ptep_get(last_ptep)); } } static void contpte_convert(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0); unsigned long start_addr; pte_t *start_ptep; int i; start_ptep = ptep = contpte_align_down(ptep); start_addr = addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); pte = pfn_pte(ALIGN_DOWN(pte_pfn(pte), CONT_PTES), pte_pgprot(pte)); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) { pte_t ptent = __ptep_get_and_clear(mm, addr, ptep); if (pte_dirty(ptent)) pte = pte_mkdirty(pte); if (pte_young(ptent)) pte = pte_mkyoung(pte); } __flush_tlb_range(&vma, start_addr, addr, PAGE_SIZE, true, 3); __set_ptes(mm, start_addr, start_ptep, pte, CONT_PTES); } void __contpte_try_fold(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { /* * We have already checked that the virtual and pysical addresses are * correctly aligned for a contpte mapping in contpte_try_fold() so the * remaining checks are to ensure that the contpte range is fully * covered by a single folio, and ensure that all the ptes are valid * with contiguous PFNs and matching prots. We ignore the state of the * access and dirty bits for the purpose of deciding if its a contiguous * range; the folding process will generate a single contpte entry which * has a single access and dirty bit. Those 2 bits are the logical OR of * their respective bits in the constituent pte entries. In order to * ensure the contpte range is covered by a single folio, we must * recover the folio from the pfn, but special mappings don't have a * folio backing them. Fortunately contpte_try_fold() already checked * that the pte is not special - we never try to fold special mappings. * Note we can't use vm_normal_page() for this since we don't have the * vma. */ unsigned long folio_start, folio_end; unsigned long cont_start, cont_end; pte_t expected_pte, subpte; struct folio *folio; struct page *page; unsigned long pfn; pte_t *orig_ptep; pgprot_t prot; int i; if (!mm_is_user(mm)) return; page = pte_page(pte); folio = page_folio(page); folio_start = addr - (page - &folio->page) * PAGE_SIZE; folio_end = folio_start + folio_nr_pages(folio) * PAGE_SIZE; cont_start = ALIGN_DOWN(addr, CONT_PTE_SIZE); cont_end = cont_start + CONT_PTE_SIZE; if (folio_start > cont_start || folio_end < cont_end) return; pfn = ALIGN_DOWN(pte_pfn(pte), CONT_PTES); prot = pte_pgprot(pte_mkold(pte_mkclean(pte))); expected_pte = pfn_pte(pfn, prot); orig_ptep = ptep; ptep = contpte_align_down(ptep); for (i = 0; i < CONT_PTES; i++) { subpte = pte_mkold(pte_mkclean(__ptep_get(ptep))); if (!pte_same(subpte, expected_pte)) return; expected_pte = pte_advance_pfn(expected_pte, 1); ptep++; } pte = pte_mkcont(pte); contpte_convert(mm, addr, orig_ptep, pte); } EXPORT_SYMBOL_GPL(__contpte_try_fold); void __contpte_try_unfold(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { /* * We have already checked that the ptes are contiguous in * contpte_try_unfold(), so just check that the mm is user space. */ if (!mm_is_user(mm)) return; pte = pte_mknoncont(pte); contpte_convert(mm, addr, ptep, pte); } EXPORT_SYMBOL_GPL(__contpte_try_unfold); pte_t contpte_ptep_get(pte_t *ptep, pte_t orig_pte) { /* * Gather access/dirty bits, which may be populated in any of the ptes * of the contig range. We are guaranteed to be holding the PTL, so any * contiguous range cannot be unfolded or otherwise modified under our * feet. */ pte_t pte; int i; ptep = contpte_align_down(ptep); for (i = 0; i < CONT_PTES; i++, ptep++) { pte = __ptep_get(ptep); if (pte_dirty(pte)) orig_pte = pte_mkdirty(orig_pte); if (pte_young(pte)) orig_pte = pte_mkyoung(orig_pte); } return orig_pte; } EXPORT_SYMBOL_GPL(contpte_ptep_get); pte_t contpte_ptep_get_lockless(pte_t *orig_ptep) { /* * The ptep_get_lockless() API requires us to read and return *orig_ptep * so that it is self-consistent, without the PTL held, so we may be * racing with other threads modifying the pte. Usually a READ_ONCE() * would suffice, but for the contpte case, we also need to gather the * access and dirty bits from across all ptes in the contiguous block, * and we can't read all of those neighbouring ptes atomically, so any * contiguous range may be unfolded/modified/refolded under our feet. * Therefore we ensure we read a _consistent_ contpte range by checking * that all ptes in the range are valid and have CONT_PTE set, that all * pfns are contiguous and that all pgprots are the same (ignoring * access/dirty). If we find a pte that is not consistent, then we must * be racing with an update so start again. If the target pte does not * have CONT_PTE set then that is considered consistent on its own * because it is not part of a contpte range. */ pgprot_t orig_prot; unsigned long pfn; pte_t orig_pte; pgprot_t prot; pte_t *ptep; pte_t pte; int i; retry: orig_pte = __ptep_get(orig_ptep); if (!pte_valid_cont(orig_pte)) return orig_pte; orig_prot = pte_pgprot(pte_mkold(pte_mkclean(orig_pte))); ptep = contpte_align_down(orig_ptep); pfn = pte_pfn(orig_pte) - (orig_ptep - ptep); for (i = 0; i < CONT_PTES; i++, ptep++, pfn++) { pte = __ptep_get(ptep); prot = pte_pgprot(pte_mkold(pte_mkclean(pte))); if (!pte_valid_cont(pte) || pte_pfn(pte) != pfn || pgprot_val(prot) != pgprot_val(orig_prot)) goto retry; if (pte_dirty(pte)) orig_pte = pte_mkdirty(orig_pte); if (pte_young(pte)) orig_pte = pte_mkyoung(orig_pte); } return orig_pte; } EXPORT_SYMBOL_GPL(contpte_ptep_get_lockless); void contpte_set_ptes(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte, unsigned int nr) { unsigned long next; unsigned long end; unsigned long pfn; pgprot_t prot; /* * The set_ptes() spec guarantees that when nr > 1, the initial state of * all ptes is not-present. Therefore we never need to unfold or * otherwise invalidate a range before we set the new ptes. * contpte_set_ptes() should never be called for nr < 2. */ VM_WARN_ON(nr == 1); if (!mm_is_user(mm)) return __set_ptes(mm, addr, ptep, pte, nr); end = addr + (nr << PAGE_SHIFT); pfn = pte_pfn(pte); prot = pte_pgprot(pte); do { next = pte_cont_addr_end(addr, end); nr = (next - addr) >> PAGE_SHIFT; pte = pfn_pte(pfn, prot); if (((addr | next | (pfn << PAGE_SHIFT)) & ~CONT_PTE_MASK) == 0) pte = pte_mkcont(pte); else pte = pte_mknoncont(pte); __set_ptes(mm, addr, ptep, pte, nr); addr = next; ptep += nr; pfn += nr; } while (addr != end); } EXPORT_SYMBOL_GPL(contpte_set_ptes); void contpte_clear_full_ptes(struct mm_struct *mm, unsigned long addr, pte_t *ptep, unsigned int nr, int full) { contpte_try_unfold_partial(mm, addr, ptep, nr); __clear_full_ptes(mm, addr, ptep, nr, full); } EXPORT_SYMBOL_GPL(contpte_clear_full_ptes); pte_t contpte_get_and_clear_full_ptes(struct mm_struct *mm, unsigned long addr, pte_t *ptep, unsigned int nr, int full) { contpte_try_unfold_partial(mm, addr, ptep, nr); return __get_and_clear_full_ptes(mm, addr, ptep, nr, full); } EXPORT_SYMBOL_GPL(contpte_get_and_clear_full_ptes); int contpte_ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { /* * ptep_clear_flush_young() technically requires us to clear the access * flag for a _single_ pte. However, the core-mm code actually tracks * access/dirty per folio, not per page. And since we only create a * contig range when the range is covered by a single folio, we can get * away with clearing young for the whole contig range here, so we avoid * having to unfold. */ int young = 0; int i; ptep = contpte_align_down(ptep); addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) young |= __ptep_test_and_clear_young(vma, addr, ptep); return young; } EXPORT_SYMBOL_GPL(contpte_ptep_test_and_clear_young); int contpte_ptep_clear_flush_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { int young; young = contpte_ptep_test_and_clear_young(vma, addr, ptep); if (young) { /* * See comment in __ptep_clear_flush_young(); same rationale for * eliding the trailing DSB applies here. */ addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); __flush_tlb_range_nosync(vma, addr, addr + CONT_PTE_SIZE, PAGE_SIZE, true, 3); } return young; } EXPORT_SYMBOL_GPL(contpte_ptep_clear_flush_young); void contpte_wrprotect_ptes(struct mm_struct *mm, unsigned long addr, pte_t *ptep, unsigned int nr) { /* * If wrprotecting an entire contig range, we can avoid unfolding. Just * set wrprotect and wait for the later mmu_gather flush to invalidate * the tlb. Until the flush, the page may or may not be wrprotected. * After the flush, it is guaranteed wrprotected. If it's a partial * range though, we must unfold, because we can't have a case where * CONT_PTE is set but wrprotect applies to a subset of the PTEs; this * would cause it to continue to be unpredictable after the flush. */ contpte_try_unfold_partial(mm, addr, ptep, nr); __wrprotect_ptes(mm, addr, ptep, nr); } EXPORT_SYMBOL_GPL(contpte_wrprotect_ptes); int contpte_ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep, pte_t entry, int dirty) { unsigned long start_addr; pte_t orig_pte; int i; /* * Gather the access/dirty bits for the contiguous range. If nothing has * changed, its a noop. */ orig_pte = pte_mknoncont(ptep_get(ptep)); if (pte_val(orig_pte) == pte_val(entry)) return 0; /* * We can fix up access/dirty bits without having to unfold the contig * range. But if the write bit is changing, we must unfold. */ if (pte_write(orig_pte) == pte_write(entry)) { /* * For HW access management, we technically only need to update * the flag on a single pte in the range. But for SW access * management, we need to update all the ptes to prevent extra * faults. Avoid per-page tlb flush in __ptep_set_access_flags() * and instead flush the whole range at the end. */ ptep = contpte_align_down(ptep); start_addr = addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) __ptep_set_access_flags(vma, addr, ptep, entry, 0); if (dirty) __flush_tlb_range(vma, start_addr, addr, PAGE_SIZE, true, 3); } else { __contpte_try_unfold(vma->vm_mm, addr, ptep, orig_pte); __ptep_set_access_flags(vma, addr, ptep, entry, dirty); } return 1; } EXPORT_SYMBOL_GPL(contpte_ptep_set_access_flags);