linux-ti-omap4 (2.6.35-980.1release4) maverick; urgency=low CHANGELOG: Do not edit directly. Autogenerated at release. CHANGELOG: Use the printchanges target to see the curent changes. CHANGELOG: Use the insertchanges target to create the final log. -- Sebastien JAN Mon, 15 Nov 2010 18:45:29 +0100 linux-ti-omap4 (2.6.35-980.1release3) maverick; urgency=low [ Liam Girdwood ] * ARM: Expose sdp4430/panda driver names to userspace - LP: #637947 [ Sebastien Jan ] * Ubuntu-2.6.35-980.1release3 [ Upstream Kernel Changes ] * SYSLINK: IPC - changes for messageQ unblock * SYSLINK: IPC-replace printks with pr_xxx * SYSLINK: PROCMGR-replace printks with pr_xxx * SYSLINK: notify-ducati-replace printks with pr_xxx * SYSLINK: notify-replace printks with pr_xxx * oprofile: Fix the hang while taking the cpu offline * Support different event according to the WLAN chip -- Sebastien JAN Tue, 09 Nov 2010 14:44:13 +0100 linux-ti-omap4 (2.6.35-980.1release2) maverick; urgency=low [ Upstream Kernel Changes ] * ASoC: twl6040: Remove audio interrupt workqueue -- Sebastien JAN Fri, 05 Nov 2010 19:43:03 +0100 linux-ti-omap4 (2.6.35-980.1release1) maverick; urgency=low [ Sebastien Jan ] * Revert "auto-generate uImage file" * [Config] Align with L24.11-p2 LDC kernel config [ Upstream Kernel Changes ] * OMAP4: Enable ondemand governor in the defconfig * ASoC: twl6040: Increase timeout for power up * ASoC: TWL6040: Use correct offset for LineInAmp Right * ARM: OMAP4: Add GPLv2 header to twl6040-codec.h * OMAP4: TWL6040: Use twl6040-codec MFD header * ASoC: core - make BE ref counting per stream * ASoC: ABE DAI - do BE stream ref count * ASoC: ABE DSP: Update to HAL release 08.50 * ASoC: ABE DSP: Update driver code according to ABE HAL 08.50 API update * ASoC: ABE DSP: Remove warnings * omap:iodmm-make dma call for flushing configurable * syslink: rproc - add support for START and STOP events * omap: 4430sdp: Minimize existing defconfig * omap: 4430sdp: Update for USB and TIWLAN_SDIO * I2C: runtime: Fix checks which make legacy suspend to never get called * omap4: debug: L3 interconnect error handling * mmc: fix compilation warning * RCCR and XCCR register values are modified to enable transfer and * mfd: twl6030 gpadc calibration * usb: omap: Runtime pm for EHCI and OHCI * usb: ehci-omap: Move Kconfig option to proper location * omap4: kill compile warning * mmc: failure of block read wait for long time * OMAP4: V4L2/DSS - Fix wrong configuration for YUV422 * DSS2: Fix crash seen when debugging is enabled * OMAP4: DSS WB - Fix wrong size configuration * OMAP: DSS2: Fixed device resolution change notification handler * DSS: Set channel output in _dispc_setup_plane. * OMAP4:DSS:HDMI: Patch to add seperate edid.c * OMAP4:DSS:HDMI:Patch to incorporate edid.c changes in hdmi files. * OMAP4:DSS:HDMI:Patch to read the Audio Video and VSDB YUV information * OMAP4:DSS:HDMI:Patch to read AVI Infoframe in HDMI * OMAP4:DSS:HDMI:Patch to add RGB->YUV conversion support in AVI inforframe * OMAP4: DSS: HDMI: Use Display's kobject for uevent * DSS2: Add a state variable for dss_mainclk * DSS2: Return from omap_dss_mgr_apply if main clock is disabled * DSS2/V4L2: Fail to register DSS isr if mainclk is diabled * ASoC: twl6040 - Fix TLV dB step values for gains. * ASoC: OMAP4: Align max number of channels for UL * ASoC: ABE DSP: Update driver for ABE PM management * ASoC: ABE DSP: Add API to stop the event generator * ASoC: ABE DAI: Align-mcbsp-configuration * ASoC: ABE-DSP: Add support for sidetone equalizer * ASoC: ABE-DSP: Add support for DMIC equalizer * ASoC: ABE-DSP: Correct typo in control name * ASoC: ABE-DSP: Update DL1 & DL2 equalizers coeffs * POWER: TWL6030 BCI sysfs and Fuel Gauge * OMAP4: PM: Enable Device RET support * ASoC: ABE DSP: Update transition mode between OPP50/OPP100 mode * SYSLINK:IPU-PM-move iommu handles to attach and detach * omap:iommu-event notification shouldn't be blocking call * syslink: devh - call rproc_stop if IOMMUCLOSE is received * rproc: add protection to rproc_eventdf_ntfy * rproc: fix missing common proc args to match userspace * Changes made to remove warnings during compilation * OMAP4: PM: Disable SR in idle and enable AUTO RET * OMAP: Suppress spurious info prints in the voltage layer * To enable CONFIG_WIFI_CONTROL_FUNC in the sdp4430 and panda defconfig * Adding a WVGA timings in OMAPFB mode database * OMAPFB: TILER 16bpp support * OMAP4:DSS:HDMI:Patch to fix SYNC_LOST_DIGIT error when switching the timings with custom_edid_timing * OMAP: PM: In resume only increment the device usecount * OMAP: DSS: WB: Cleanup for WB * OMAP4:DSS:HDMI:Patch to get the prints with custom_edid_timing * OMAP4:DSS:HDMI:This fixes the HDMI Hot-plug detect inconsistency issue in OMAP4 * usb: musb: Enable the usbphy clocks only for OMAP4 * TWL6030 : USBOTG VBUS event generation on charger VBUS events. * TWL6030: usb: Twl6030-usb tranciever support. * TWL6030: usb: enabling twl6030-usb tranciever in Kconfig. * usb: musb: Enable cable based otg support. * usb: musb: Fix for non pm build break * DSS2/V4L2: Fix: Do not check omap_dispc_register_isr for errors * Adding set_timings and check_timings in TAAL * omap:omap-pm: fix warning in omap_pm_set_min_bus_tput() * OMAPFB: Adding support for dynamically changing bpp in case of TILER buffers * V4L2: Assign YUYV to 2 bytes per pixel in omap_vout_try_format * DSS2: Fix debugfs feature for DSI * DSS2: Fix debugfs dispc clocks * OMAP4: RLS_NOTES: Adding release notes for L24.11 * syslink:ipu_pm: add L3 bw and fdif cstr * Context save and restore of McBSP SYSCONFIG register * OMAP4: PM: Dynamically calculate vsel values for diff PMIC * ASoC: ABE DSP: Fix main port algorithm * omap4: l2x0: Set share override bit of Pl310 * usb: musb:Fix for core retention with usb disabled * OMAP: musb: Remove the omap_hwmod_lookup call in the interrupt disabled context. * usb: musb: fix for unloading the musb driver * OMAP4:DSS2: Fix clk debugfs support when DSS clocks are off * OMAP: DSS2: Improved interlaced mode support * V4L2/DSS2: Add support for bottom/top interlaced formats. * DSS2: Simplify TILER orientation logic. * DSS2: Simplify rotation_type handling in _disp_setup_plane * DSS2: OMAP4: Added pre-decimation support for overlays * OMAP4:DSS2: Refined predecimation 3/5-tap decision logic. * OMAP4:DSS2: Fix WB patch YUYV handling similarly to normal YUYV handling * OMAP/DSS2: Do not set channel out in overlay's set_manager if OFF * OMAP/DSS2: Add error status to mainclk and opt_clock enable methods. * OMAP/DSS2: Disable devices that failed to resume. * OMAP4:DSS:HDMI:Patch to add 1280 800 @ 60Hz timing. * OMAP4:DSS:HDMI:Patch to add correct Vsync and Hsync polarity for all the timing values * OMAP4:DSS:HDMI:Patch to fix the pixel clock value for 1280 * 768 VESA timing * DSS2: Fix precednece for dispc irq masks * DSS2: Revert back to original way of calculating tiler orientation parameters * DSS2: Add NV12 color format for bpp calculation in configure_overlay * Correcting base address for WB FIR2 * OMAP: DSS2: WB settings cleanup * adding register dumps for WB * WB GO bit should not be used in memory mode * OMAP: V4L2/WB: Use 4 byte TILER container for YUYV * DSS2: Fix Clarity issues seen in YUYV rotation * DSS2: Fix: Take positive values of pm_runtime_get_sync as a successful return value * syslink:ipu_pm: send pid_death just to appm3 * syslink: notifier - add a mutext per notify_object * SYSLINK : Disable devh notification for tiler events. * omap: remoteproc - fix sparse warnings in remote proc about static * omap:iodmm-cleanup and fixes * omap:iodmm-send notification on close only when resources not free * omap:remoteproc: enable gpt3&4 for ipu hibernation * syslink:ipu_pm: allow IPU hibernation * omap:iommu: restore just the prsvd tlb entries * pandaboard: Enable device RET support -- Sebastien JAN Wed, 03 Nov 2010 18:05:03 +0100 linux-ti-omap4 (2.6.35-980.0) UNRELEASED; urgency=low -- Sebastien JAN Wed, 03 Nov 2010 15:46:19 +0100 linux-ti-omap4 (2.6.35-ti903.13+release5) UNRELEASED; urgency=low -- Sebastien JAN Fri, 22 Oct 2010 19:48:15 +0200