summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
blob: e61999ce54e964af1c59d10b470e25e9d172581d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
NVIDIA Tegra host1x

Required properties:
- compatible: "nvidia,tegra<chip>-host1x"
- reg: Physical base address and length of the controller's registers.
  For pre-Tegra186, one entry describing the whole register area.
  For Tegra186, one entry for each entry in reg-names:
    "vm" - VM region assigned to Linux
    "hypervisor" - Hypervisor region (only if Linux acts as hypervisor)
- interrupts: The interrupt outputs from the controller.
- #address-cells: The number of cells used to represent physical base addresses
  in the host1x address space. Should be 1.
- #size-cells: The number of cells used to represent the size of an address
  range in the host1x address space. Should be 1.
- ranges: The mapping of the host1x address space to the CPU address space.
- clocks: Must contain one entry, for the module clock.
  See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
  See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
  - host1x
  - mc

Optional properties:
- operating-points-v2: See ../bindings/opp/opp.txt for details.
  - power-domains: Phandle to HEG or core power domain.

For each opp entry in 'operating-points-v2' table of host1x and its modules:
- opp-supported-hw: One bitfield indicating:
	On Tegra20: SoC process ID mask
	On Tegra30+: SoC speedo ID mask

	A bitwise AND is performed against the value and if any bit
	matches, the OPP gets enabled.

Each host1x client module having to perform DMA through the Memory Controller
should have the interconnect endpoints set to the Memory Client and External
Memory respectively.

The host1x top-level node defines a number of children, each representing one
of the following host1x client modules:

- mpe: video encoder

  Required properties:
  - compatible: "nvidia,tegra<chip>-mpe"
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: Must contain one entry, for the module clock.
    See ../clocks/clock-bindings.txt for details.
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - mpe

  Optional properties:
  - interconnects: Must contain entry for the MPE memory clients.
  - interconnect-names: Must include name of the interconnect path for each
    interconnect entry. Consult TRM documentation for information about
    available memory clients, see MEMORY CONTROLLER section.
  - operating-points-v2: See ../bindings/opp/opp.txt for details.
  - power-domains: Phandle to MPE power domain.

- vi: video input

  Required properties:
  - compatible: "nvidia,tegra<chip>-vi"
  - reg: Physical base address and length of the controller registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: clocks: Must contain one entry, for the module clock.
    See ../clocks/clock-bindings.txt for details.
  - Tegra20/Tegra30/Tegra114/Tegra124:
    - resets: Must contain an entry for each entry in reset-names.
      See ../reset/reset.txt for details.
    - reset-names: Must include the following entries:
      - vi
  - Tegra210:
    - power-domains: Must include venc powergate node as vi is in VE partition.

  ports (optional node)
  vi can have optional ports node and max 6 ports are supported. Each port
  should have single 'endpoint' child node. All port nodes are grouped under
  ports node. Please refer to the bindings defined in
  Documentation/devicetree/bindings/media/video-interfaces.txt

  csi (required node)
  Tegra210 has CSI part of VI sharing same host interface and register space.
  So, VI device node should have CSI child node.

    - csi: mipi csi interface to vi

      Required properties:
      - compatible: "nvidia,tegra210-csi"
      - reg: Physical base address offset to parent and length of the controller
        registers.
      - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks.
        See ../clocks/clock-bindings.txt for details.
      - power-domains: Must include sor powergate node as csicil is in
        SOR partition.

      channel (optional nodes)
      Maximum 6 channels are supported with each csi brick as either x4 or x2
      based on hw connectivity to sensor.

      Required properties:
      - reg: csi port number. Valid port numbers are 0 through 5.
      - nvidia,mipi-calibrate: Should contain a phandle and a specifier
        specifying which pads are used by this CSI port and need to be
	calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt.

      Each channel node must contain 2 port nodes which can be grouped
      under 'ports' node and each port should have a single child 'endpoint'
      node.

        ports node
        Please refer to the bindings defined in
        Documentation/devicetree/bindings/media/video-interfaces.txt

        ports node must contain below 2 port nodes.
        port@0 with single child 'endpoint' node always a sink.
        port@1 with single child 'endpoint' node always a source.

        port@0 (required node)
        Required properties:
        - reg: 0

	  endpoint (required node)
	  Required properties:
	  - data-lanes: an array of data lane from 1 to 8. Valid array
	    lengths are 1/2/4/8.
	  - remote-endpoint: phandle to sensor 'endpoint' node.

        port@1 (required node)
        Required properties:
        - reg: 1

	  endpoint (required node)
	  Required properties:
	  - remote-endpoint: phandle to vi port 'endpoint' node.

  Optional properties:
  - interconnects: Must contain entry for the VI memory clients.
  - interconnect-names: Must include name of the interconnect path for each
    interconnect entry. Consult TRM documentation for information about
    available memory clients, see MEMORY CONTROLLER section.
  - operating-points-v2: See ../bindings/opp/opp.txt for details.
  - power-domains: Phandle to VENC power domain.

- epp: encoder pre-processor

  Required properties:
  - compatible: "nvidia,tegra<chip>-epp"
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: Must contain one entry, for the module clock.
    See ../clocks/clock-bindings.txt for details.
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - epp

  Optional properties:
  - interconnects: Must contain entry for the EPP memory clients.
  - interconnect-names: Must include name of the interconnect path for each
    interconnect entry. Consult TRM documentation for information about
    available memory clients, see MEMORY CONTROLLER section.
  - operating-points-v2: See ../bindings/opp/opp.txt for details.
  - power-domains: Phandle to HEG or core power domain.

- isp: image signal processor

  Required properties:
  - compatible: "nvidia,tegra<chip>-isp"
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: Must contain one entry, for the module clock.
    See ../clocks/clock-bindings.txt for details.
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - isp

  Optional properties:
  - interconnects: Must contain entry for the ISP memory clients.
  - interconnect-names: Must include name of the interconnect path for each
    interconnect entry. Consult TRM documentation for information about
    available memory clients, see MEMORY CONTROLLER section.
  - power-domains: Phandle to VENC or core power domain.

- gr2d: 2D graphics engine

  Required properties:
  - compatible: "nvidia,tegra<chip>-gr2d"
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: Must contain one entry, for the module clock.
    See ../clocks/clock-bindings.txt for details.
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - 2d
    - mc

  Optional properties:
  - interconnects: Must contain entry for the GR2D memory clients.
  - interconnect-names: Must include name of the interconnect path for each
    interconnect entry. Consult TRM documentation for information about
    available memory clients, see MEMORY CONTROLLER section.
  - operating-points-v2: See ../bindings/opp/opp.txt for details.
  - power-domains: Phandle to HEG or core power domain.

- gr3d: 3D graphics engine

  Required properties:
  - compatible: "nvidia,tegra<chip>-gr3d"
  - reg: Physical base address and length of the controller's registers.
  - clocks: Must contain an entry for each entry in clock-names.
    See ../clocks/clock-bindings.txt for details.
  - clock-names: Must include the following entries:
    (This property may be omitted if the only clock in the list is "3d")
    - 3d
      This MUST be the first entry.
    - 3d2 (Only required on SoCs with two 3D clocks)
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - 3d
    - 3d2 (Only required on SoCs with two 3D clocks)
    - mc
    - mc2 (Only required on SoCs with two 3D clocks)

  Optional properties:
  - interconnects: Must contain entry for the GR3D memory clients.
  - interconnect-names: Must include name of the interconnect path for each
    interconnect entry. Consult TRM documentation for information about
    available memory clients, see MEMORY CONTROLLER section.
  - operating-points-v2: See ../bindings/opp/opp.txt for details.
  - power-domains: Phandles to 3D or core power domain.

- dc: display controller

  Required properties:
  - compatible: "nvidia,tegra<chip>-dc"
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: Must contain an entry for each entry in clock-names.
    See ../clocks/clock-bindings.txt for details.
  - clock-names: Must include the following entries:
    - dc
      This MUST be the first entry.
    - parent
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - dc
  - nvidia,head: The number of the display controller head. This is used to
    setup the various types of output to receive video data from the given
    head.

  Each display controller node has a child node, named "rgb", that represents
  the RGB output associated with the controller. It can take the following
  optional properties:
  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
  - nvidia,edid: supplies a binary EDID blob
  - nvidia,panel: phandle of a display panel
  - interconnects: Must contain entry for the DC memory clients.
  - interconnect-names: Must include name of the interconnect path for each
    interconnect entry. Consult TRM documentation for information about
    available memory clients, see MEMORY CONTROLLER section.
  - operating-points-v2: See ../bindings/opp/opp.txt for details.
  - power-domains: Phandle to core power domain.

- hdmi: High Definition Multimedia Interface

  Required properties:
  - compatible: "nvidia,tegra<chip>-hdmi"
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - hdmi-supply: supply for the +5V HDMI connector pin
  - vdd-supply: regulator for supply voltage
  - pll-supply: regulator for PLL
  - clocks: Must contain an entry for each entry in clock-names.
    See ../clocks/clock-bindings.txt for details.
  - clock-names: Must include the following entries:
    - hdmi
      This MUST be the first entry.
    - parent
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - hdmi

  Optional properties:
  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
  - nvidia,edid: supplies a binary EDID blob
  - nvidia,panel: phandle of a display panel
  - operating-points-v2: See ../bindings/opp/opp.txt for details.

- tvo: TV encoder output

  Required properties:
  - compatible: "nvidia,tegra<chip>-tvo"
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: Must contain one entry, for the module clock.
    See ../clocks/clock-bindings.txt for details.

  Optional properties:
  - operating-points-v2: See ../bindings/opp/opp.txt for details.
  - power-domains: Phandle to core power domain.

- dsi: display serial interface

  Required properties:
  - compatible: "nvidia,tegra<chip>-dsi"
  - reg: Physical base address and length of the controller's registers.
  - clocks: Must contain an entry for each entry in clock-names.
    See ../clocks/clock-bindings.txt for details.
  - clock-names: Must include the following entries:
    - dsi
      This MUST be the first entry.
    - lp
    - parent
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - dsi
  - avdd-dsi-supply: phandle of a supply that powers the DSI controller
  - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
    which pads are used by this DSI output and need to be calibrated. See also
    ../display/tegra/nvidia,tegra114-mipi.txt.

  Optional properties:
  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
  - nvidia,edid: supplies a binary EDID blob
  - nvidia,panel: phandle of a display panel
  - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
    up with in order to support up to 8 data lanes
  - operating-points-v2: See ../bindings/opp/opp.txt for details.

- sor: serial output resource

  Required properties:
  - compatible: Should be:
    - "nvidia,tegra124-sor": for Tegra124 and Tegra132
    - "nvidia,tegra132-sor": for Tegra132
    - "nvidia,tegra210-sor": for Tegra210
    - "nvidia,tegra210-sor1": for Tegra210
    - "nvidia,tegra186-sor": for Tegra186
    - "nvidia,tegra186-sor1": for Tegra186
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: Must contain an entry for each entry in clock-names.
    See ../clocks/clock-bindings.txt for details.
  - clock-names: Must include the following entries:
    - sor: clock input for the SOR hardware
    - out: SOR output clock
    - parent: input for the pixel clock
    - dp: reference clock for the SOR clock
    - safe: safe reference for the SOR clock during power up

    For Tegra186 and later:
    - pad: SOR pad output clock (on Tegra186 and later)

    Obsolete:
    - source: source clock for the SOR clock (obsolete, use "out" instead)

  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - sor

  Required properties on Tegra186 and later:
  - nvidia,interface: index of the SOR interface

  Optional properties:
  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
  - nvidia,edid: supplies a binary EDID blob
  - nvidia,panel: phandle of a display panel
  - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane
    of the SOR, identified by the cell's index, is mapped via the crossbar to
    the pad specified by the cell's value.

  Optional properties when driving an eDP output:
  - nvidia,dpaux: phandle to a DispayPort AUX interface

- dpaux: DisplayPort AUX interface
  - compatible : Should contain one of the following:
    - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
    - "nvidia,tegra210-dpaux": for Tegra210
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: Must contain an entry for each entry in clock-names.
    See ../clocks/clock-bindings.txt for details.
  - clock-names: Must include the following entries:
    - dpaux: clock input for the DPAUX hardware
    - parent: reference clock
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - dpaux
  - vdd-supply: phandle of a supply that powers the DisplayPort link
  - i2c-bus: Subnode where I2C slave devices are listed. This subnode
    must be always present. If there are no I2C slave devices, an empty
    node should be added. See ../../i2c/i2c.txt for more information.

  See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information
  regarding the DPAUX pad controller bindings.

- vic: Video Image Compositor
  - compatible : "nvidia,tegra<chip>-vic"
  - reg: Physical base address and length of the controller's registers.
  - interrupts: The interrupt outputs from the controller.
  - clocks: Must contain an entry for each entry in clock-names.
    See ../clocks/clock-bindings.txt for details.
  - clock-names: Must include the following entries:
    - vic: clock input for the VIC hardware
  - resets: Must contain an entry for each entry in reset-names.
    See ../reset/reset.txt for details.
  - reset-names: Must include the following entries:
    - vic

  Optional properties:
  - interconnects: Must contain entry for the VIC memory clients.
  - interconnect-names: Must include name of the interconnect path for each
    interconnect entry. Consult TRM documentation for information about
    available memory clients, see MEMORY CONTROLLER section.

Example:

/ {
	...

	host1x {
		compatible = "nvidia,tegra20-host1x", "simple-bus";
		reg = <0x50000000 0x00024000>;
		interrupts = <0 65 0x04   /* mpcore syncpt */
			      0 67 0x04>; /* mpcore general */
		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
		resets = <&tegra_car 28>;
		reset-names = "host1x";
		operating-points-v2 = <&dvfs_opp_table>;
		power-domains = <&domain>;

		#address-cells = <1>;
		#size-cells = <1>;

		ranges = <0x54000000 0x54000000 0x04000000>;

		mpe {
			compatible = "nvidia,tegra20-mpe";
			reg = <0x54040000 0x00040000>;
			interrupts = <0 68 0x04>;
			clocks = <&tegra_car TEGRA20_CLK_MPE>;
			resets = <&tegra_car 60>;
			reset-names = "mpe";
			operating-points-v2 = <&dvfs_opp_table>;
			power-domains = <&domain>;
		};

		vi@54080000 {
			compatible = "nvidia,tegra210-vi";
			reg = <0x0 0x54080000 0x0 0x700>;
			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
			operating-points-v2 = <&dvfs_opp_table>;

			clocks = <&tegra_car TEGRA210_CLK_VI>;
			power-domains = <&pd_venc>;

			#address-cells = <1>;
			#size-cells = <1>;

			ranges = <0x0 0x0 0x54080000 0x2000>;

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					imx219_vi_in0: endpoint {
						remote-endpoint = <&imx219_csi_out0>;
					};
				};
			};

			csi@838 {
				compatible = "nvidia,tegra210-csi";
				reg = <0x838 0x1300>;
				assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
						  <&tegra_car TEGRA210_CLK_CILCD>,
						  <&tegra_car TEGRA210_CLK_CILE>,
						  <&tegra_car TEGRA210_CLK_CSI_TPG>;
				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
							 <&tegra_car TEGRA210_CLK_PLL_P>,
							 <&tegra_car TEGRA210_CLK_PLL_P>;
				assigned-clock-rates = <102000000>,
						       <102000000>,
						       <102000000>,
						       <972000000>;

				clocks = <&tegra_car TEGRA210_CLK_CSI>,
					 <&tegra_car TEGRA210_CLK_CILAB>,
					 <&tegra_car TEGRA210_CLK_CILCD>,
					 <&tegra_car TEGRA210_CLK_CILE>,
					 <&tegra_car TEGRA210_CLK_CSI_TPG>;
				clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
				power-domains = <&pd_sor>;

				#address-cells = <1>;
				#size-cells = <0>;

				channel@0 {
					reg = <0>;
					nvidia,mipi-calibrate = <&mipi 0x001>;

					ports {
						#address-cells = <1>;
						#size-cells = <0>;

						port@0 {
							reg = <0>;
							imx219_csi_in0: endpoint {
								data-lanes = <1 2>;
								remote-endpoint = <&imx219_out0>;
							};
						};

						port@1 {
							reg = <1>;
							imx219_csi_out0: endpoint {
								remote-endpoint = <&imx219_vi_in0>;
							};
						};
					};
				};
			};
		};

		epp {
			compatible = "nvidia,tegra20-epp";
			reg = <0x540c0000 0x00040000>;
			interrupts = <0 70 0x04>;
			clocks = <&tegra_car TEGRA20_CLK_EPP>;
			resets = <&tegra_car 19>;
			reset-names = "epp";
			operating-points-v2 = <&dvfs_opp_table>;
			power-domains = <&domain>;
		};

		isp {
			compatible = "nvidia,tegra20-isp";
			reg = <0x54100000 0x00040000>;
			interrupts = <0 71 0x04>;
			clocks = <&tegra_car TEGRA20_CLK_ISP>;
			resets = <&tegra_car 23>;
			reset-names = "isp";
		};

		gr2d {
			compatible = "nvidia,tegra20-gr2d";
			reg = <0x54140000 0x00040000>;
			interrupts = <0 72 0x04>;
			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
			resets = <&tegra_car 21>;
			reset-names = "2d";
			operating-points-v2 = <&dvfs_opp_table>;
			power-domains = <&domain>;
		};

		gr3d {
			compatible = "nvidia,tegra20-gr3d";
			reg = <0x54180000 0x00040000>;
			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
			resets = <&tegra_car 24>;
			reset-names = "3d";
			operating-points-v2 = <&dvfs_opp_table>;
			power-domains = <&domain>;
		};

		dc@54200000 {
			compatible = "nvidia,tegra20-dc";
			reg = <0x54200000 0x00040000>;
			interrupts = <0 73 0x04>;
			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
				 <&tegra_car TEGRA20_CLK_PLL_P>;
			clock-names = "dc", "parent";
			resets = <&tegra_car 27>;
			reset-names = "dc";
			operating-points-v2 = <&dvfs_opp_table>;
			power-domains = <&domain>;

			interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
					<&mc TEGRA20_MC_DISPLAY0B &emc>,
					<&mc TEGRA20_MC_DISPLAY0C &emc>,
					<&mc TEGRA20_MC_DISPLAYHC &emc>;
			interconnect-names = "wina",
					     "winb",
					     "winc",
					     "cursor";

			rgb {
				status = "disabled";
			};
		};

		dc@54240000 {
			compatible = "nvidia,tegra20-dc";
			reg = <0x54240000 0x00040000>;
			interrupts = <0 74 0x04>;
			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
				 <&tegra_car TEGRA20_CLK_PLL_P>;
			clock-names = "dc", "parent";
			resets = <&tegra_car 26>;
			reset-names = "dc";
			operating-points-v2 = <&dvfs_opp_table>;
			power-domains = <&domain>;

			interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
					<&mc TEGRA20_MC_DISPLAY0BB &emc>,
					<&mc TEGRA20_MC_DISPLAY0CB &emc>,
					<&mc TEGRA20_MC_DISPLAYHCB &emc>;
			interconnect-names = "wina",
					     "winb",
					     "winc",
					     "cursor";

			rgb {
				status = "disabled";
			};
		};

		hdmi {
			compatible = "nvidia,tegra20-hdmi";
			reg = <0x54280000 0x00040000>;
			interrupts = <0 75 0x04>;
			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
			clock-names = "hdmi", "parent";
			resets = <&tegra_car 51>;
			reset-names = "hdmi";
			status = "disabled";
			operating-points-v2 = <&dvfs_opp_table>;
		};

		tvo {
			compatible = "nvidia,tegra20-tvo";
			reg = <0x542c0000 0x00040000>;
			interrupts = <0 76 0x04>;
			clocks = <&tegra_car TEGRA20_CLK_TVO>;
			status = "disabled";
			operating-points-v2 = <&dvfs_opp_table>;
		};

		dsi {
			compatible = "nvidia,tegra20-dsi";
			reg = <0x54300000 0x00040000>;
			clocks = <&tegra_car TEGRA20_CLK_DSI>,
				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
			clock-names = "dsi", "parent";
			resets = <&tegra_car 48>;
			reset-names = "dsi";
			status = "disabled";
			operating-points-v2 = <&dvfs_opp_table>;
		};
	};

	...
};