summaryrefslogtreecommitdiff
path: root/drivers/serial/bfin_5xx.c
blob: 408390f93db9e7d4581420d5de487a5d59cc8a62 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
/*
 * File:         drivers/serial/bfin_5xx.c
 * Based on:     Based on drivers/serial/sa1100.c
 * Author:       Aubrey Li <aubrey.li@analog.com>
 *
 * Created:
 * Description:  Driver for blackfin 5xx serial ports
 *
 * Rev:          $Id: bfin_5xx.c,v 1.19 2006/09/24 02:33:53 aubrey Exp $
 *
 * Modified:
 *               Copyright 2006 Analog Devices Inc.
 *
 * Bugs:         Enter bugs at http://blackfin.uclinux.org/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see the file COPYING, or write
 * to the Free Software Foundation, Inc.,
 * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif

#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>

#include <asm/gpio.h>
#include <asm/mach/bfin_serial_5xx.h>

#ifdef CONFIG_SERIAL_BFIN_DMA
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
#endif

/* UART name and device definitions */
#define BFIN_SERIAL_NAME	"ttyBF"
#define BFIN_SERIAL_MAJOR	204
#define BFIN_SERIAL_MINOR	64

/*
 * Setup for console. Argument comes from the menuconfig
 */
#define DMA_RX_XCOUNT		512
#define DMA_RX_YCOUNT		(PAGE_SIZE / DMA_RX_XCOUNT)

#define DMA_RX_FLUSH_JIFFIES	5

#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
#else
static void bfin_serial_do_work(struct work_struct *work);
static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
static void local_put_char(struct bfin_serial_port *uart, char ch);
#endif

static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);

/*
 * interrupts are disabled on entry
 */
static void bfin_serial_stop_tx(struct uart_port *port)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

#ifdef CONFIG_SERIAL_BFIN_DMA
	disable_dma(uart->tx_dma_channel);
#else
	unsigned short ier;

	ier = UART_GET_IER(uart);
	ier &= ~ETBEI;
	UART_PUT_IER(uart, ier);
#endif
}

/*
 * port is locked and interrupts are disabled
 */
static void bfin_serial_start_tx(struct uart_port *port)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

#ifdef CONFIG_SERIAL_BFIN_DMA
	bfin_serial_dma_tx_chars(uart);
#else
	unsigned short ier;
	ier = UART_GET_IER(uart);
	ier |= ETBEI;
	UART_PUT_IER(uart, ier);
	bfin_serial_tx_chars(uart);
#endif
}

/*
 * Interrupts are enabled
 */
static void bfin_serial_stop_rx(struct uart_port *port)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
	unsigned short ier;

	ier = UART_GET_IER(uart);
	ier &= ~ERBFI;
	UART_PUT_IER(uart, ier);
}

/*
 * Set the modem control timer to fire immediately.
 */
static void bfin_serial_enable_ms(struct uart_port *port)
{
}

#ifdef CONFIG_SERIAL_BFIN_PIO
static void local_put_char(struct bfin_serial_port *uart, char ch)
{
	unsigned short status;
	int flags = 0;

	spin_lock_irqsave(&uart->port.lock, flags);

	do {
		status = UART_GET_LSR(uart);
	} while (!(status & THRE));

	UART_PUT_CHAR(uart, ch);
	SSYNC();

	spin_unlock_irqrestore(&uart->port.lock, flags);
}

static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
	struct tty_struct *tty = uart->port.info?uart->port.info->tty:0;
	unsigned int status, ch, flg;
#ifdef BF533_FAMILY
	static int in_break = 0;
#endif

	status = UART_GET_LSR(uart);
 	ch = UART_GET_CHAR(uart);
 	uart->port.icount.rx++;

#ifdef BF533_FAMILY
	/* The BF533 family of processors have a nice misbehavior where
	 * they continuously generate characters for a "single" break.
	 * We have to basically ignore this flood until the "next" valid
	 * character comes across.  All other Blackfin families operate
	 * properly though.
	 */
	if (in_break) {
		if (ch != 0) {
			in_break = 0;
			ch = UART_GET_CHAR(uart);
		}
		return;
	}
#endif

	if (status & BI) {
#ifdef BF533_FAMILY
		in_break = 1;
#endif
		uart->port.icount.brk++;
		if (uart_handle_break(&uart->port))
			goto ignore_char;
		flg = TTY_BREAK;
	} else if (status & PE) {
		flg = TTY_PARITY;
		uart->port.icount.parity++;
	} else if (status & OE) {
		flg = TTY_OVERRUN;
		uart->port.icount.overrun++;
	} else if (status & FE) {
		flg = TTY_FRAME;
		uart->port.icount.frame++;
	} else
		flg = TTY_NORMAL;

	if (uart_handle_sysrq_char(&uart->port, ch))
		goto ignore_char;
	if (tty)
		uart_insert_char(&uart->port, status, 2, ch, flg);

ignore_char:
	if (tty)
		tty_flip_buffer_push(tty);
}

static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
{
	struct circ_buf *xmit = &uart->port.info->xmit;

	if (uart->port.x_char) {
		UART_PUT_CHAR(uart, uart->port.x_char);
		uart->port.icount.tx++;
		uart->port.x_char = 0;
		return;
	}
	/*
	 * Check the modem control lines before
	 * transmitting anything.
	 */
	bfin_serial_mctrl_check(uart);

	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
		bfin_serial_stop_tx(&uart->port);
		return;
	}

	local_put_char(uart, xmit->buf[xmit->tail]);
	xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
	uart->port.icount.tx++;

	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
		uart_write_wakeup(&uart->port);

	if (uart_circ_empty(xmit))
		bfin_serial_stop_tx(&uart->port);
}

static irqreturn_t bfin_serial_int(int irq, void *dev_id)
{
	struct bfin_serial_port *uart = dev_id;
	unsigned short status;

	spin_lock(&uart->port.lock);
	status = UART_GET_IIR(uart);
	do {
		if ((status & IIR_STATUS) == IIR_TX_READY)
			bfin_serial_tx_chars(uart);
		if ((status & IIR_STATUS) == IIR_RX_READY)
			bfin_serial_rx_chars(uart);
		status = UART_GET_IIR(uart);
	} while (status & (IIR_TX_READY | IIR_RX_READY));
	spin_unlock(&uart->port.lock);
	return IRQ_HANDLED;
}

static void bfin_serial_do_work(struct work_struct *work)
{
	struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);

	bfin_serial_mctrl_check(uart);
}

#endif

#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
{
	struct circ_buf *xmit = &uart->port.info->xmit;
	unsigned short ier;
	int flags = 0;

	if (!uart->tx_done)
		return;

	uart->tx_done = 0;

	if (uart->port.x_char) {
		UART_PUT_CHAR(uart, uart->port.x_char);
		uart->port.icount.tx++;
		uart->port.x_char = 0;
		uart->tx_done = 1;
		return;
	}
	/*
	 * Check the modem control lines before
	 * transmitting anything.
	 */
	bfin_serial_mctrl_check(uart);

	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
		bfin_serial_stop_tx(&uart->port);
		uart->tx_done = 1;
		return;
	}

	spin_lock_irqsave(&uart->port.lock, flags);
	uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
	if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
		uart->tx_count = UART_XMIT_SIZE - xmit->tail;
	blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail),
					(unsigned long)(xmit->buf+xmit->tail+uart->tx_count));
	set_dma_config(uart->tx_dma_channel,
		set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
			INTR_ON_BUF,
			DIMENSION_LINEAR,
			DATA_SIZE_8));
	set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
	set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
	set_dma_x_modify(uart->tx_dma_channel, 1);
	enable_dma(uart->tx_dma_channel);
	ier = UART_GET_IER(uart);
	ier |= ETBEI;
	UART_PUT_IER(uart, ier);
	spin_unlock_irqrestore(&uart->port.lock, flags);
}

static void bfin_serial_dma_rx_chars(struct bfin_serial_port * uart)
{
	struct tty_struct *tty = uart->port.info->tty;
	int i, flg, status;

	status = UART_GET_LSR(uart);
	uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);;

	if (status & BI) {
		uart->port.icount.brk++;
		if (uart_handle_break(&uart->port))
			goto dma_ignore_char;
		flg = TTY_BREAK;
	} else if (status & PE) {
		flg = TTY_PARITY;
		uart->port.icount.parity++;
	} else if (status & OE) {
		flg = TTY_OVERRUN;
		uart->port.icount.overrun++;
	} else if (status & FE) {
		flg = TTY_FRAME;
		uart->port.icount.frame++;
	} else
		flg = TTY_NORMAL;

	for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) {
		if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
			goto dma_ignore_char;
		uart_insert_char(&uart->port, status, 2, uart->rx_dma_buf.buf[i], flg);
	}
dma_ignore_char:
	tty_flip_buffer_push(tty);
}

void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
{
	int x_pos, pos;
	int flags = 0;

	bfin_serial_dma_tx_chars(uart);

	spin_lock_irqsave(&uart->port.lock, flags);
	x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel);
	if (x_pos == DMA_RX_XCOUNT)
		x_pos = 0;

	pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;

	if (pos>uart->rx_dma_buf.tail) {
		uart->rx_dma_buf.tail = pos;
		bfin_serial_dma_rx_chars(uart);
		uart->rx_dma_buf.head = uart->rx_dma_buf.tail;
	}
	spin_unlock_irqrestore(&uart->port.lock, flags);
	uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
	add_timer(&(uart->rx_dma_timer));
}

static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
{
	struct bfin_serial_port *uart = dev_id;
	struct circ_buf *xmit = &uart->port.info->xmit;
	unsigned short ier;

	spin_lock(&uart->port.lock);
	if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
		clear_dma_irqstat(uart->tx_dma_channel);
		disable_dma(uart->tx_dma_channel);
		ier = UART_GET_IER(uart);
		ier &= ~ETBEI;
		UART_PUT_IER(uart, ier);
		xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1);
		uart->port.icount.tx+=uart->tx_count;

		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
			uart_write_wakeup(&uart->port);

		if (uart_circ_empty(xmit))
			bfin_serial_stop_tx(&uart->port);
		uart->tx_done = 1;
	}

	spin_unlock(&uart->port.lock);
	return IRQ_HANDLED;
}

static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
{
	struct bfin_serial_port *uart = dev_id;
	unsigned short irqstat;

	uart->rx_dma_nrows++;
	if (uart->rx_dma_nrows == DMA_RX_YCOUNT) {
		uart->rx_dma_nrows = 0;
		uart->rx_dma_buf.tail = DMA_RX_XCOUNT*DMA_RX_YCOUNT;
		bfin_serial_dma_rx_chars(uart);
		uart->rx_dma_buf.head = uart->rx_dma_buf.tail = 0;
	}
	spin_lock(&uart->port.lock);
	irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
	clear_dma_irqstat(uart->rx_dma_channel);

	spin_unlock(&uart->port.lock);
	return IRQ_HANDLED;
}
#endif

/*
 * Return TIOCSER_TEMT when transmitter is not busy.
 */
static unsigned int bfin_serial_tx_empty(struct uart_port *port)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
	unsigned short lsr;

	lsr = UART_GET_LSR(uart);
	if (lsr & TEMT)
		return TIOCSER_TEMT;
	else
		return 0;
}

static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
{
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
	if (uart->cts_pin < 0)
		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;

	if (gpio_get_value(uart->cts_pin))
		return TIOCM_DSR | TIOCM_CAR;
	else
#endif
		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
}

static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
	if (uart->rts_pin < 0)
		return;

	if (mctrl & TIOCM_RTS)
		gpio_set_value(uart->rts_pin, 0);
	else
		gpio_set_value(uart->rts_pin, 1);
#endif
}

/*
 * Handle any change of modem status signal since we were last called.
 */
static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
{
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
	unsigned int status;
# ifdef CONFIG_SERIAL_BFIN_DMA
	struct uart_info *info = uart->port.info;
	struct tty_struct *tty = info->tty;

	status = bfin_serial_get_mctrl(&uart->port);
	if (!(status & TIOCM_CTS)) {
		tty->hw_stopped = 1;
	} else {
		tty->hw_stopped = 0;
	}
# else
	status = bfin_serial_get_mctrl(&uart->port);
	uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
	if (!(status & TIOCM_CTS))
		schedule_work(&uart->cts_workqueue);
# endif
#endif
}

/*
 * Interrupts are always disabled.
 */
static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
{
}

static int bfin_serial_startup(struct uart_port *port)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

#ifdef CONFIG_SERIAL_BFIN_DMA
	dma_addr_t dma_handle;

	if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) {
		printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n");
		return -EBUSY;
	}

	if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) {
		printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n");
		free_dma(uart->rx_dma_channel);
		return -EBUSY;
	}

	set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart);
	set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart);

	uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
	uart->rx_dma_buf.head = 0;
	uart->rx_dma_buf.tail = 0;
	uart->rx_dma_nrows = 0;

	set_dma_config(uart->rx_dma_channel,
		set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
				INTR_ON_ROW, DIMENSION_2D,
				DATA_SIZE_8));
	set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT);
	set_dma_x_modify(uart->rx_dma_channel, 1);
	set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT);
	set_dma_y_modify(uart->rx_dma_channel, 1);
	set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf);
	enable_dma(uart->rx_dma_channel);

	uart->rx_dma_timer.data = (unsigned long)(uart);
	uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout;
	uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
	add_timer(&(uart->rx_dma_timer));
#else
	if (request_irq
	    (uart->port.irq, bfin_serial_int, IRQF_DISABLED,
	     "BFIN_UART_RX", uart)) {
		printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
		return -EBUSY;
	}

	if (request_irq
	    (uart->port.irq+1, bfin_serial_int, IRQF_DISABLED,
	     "BFIN_UART_TX", uart)) {
		printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
		free_irq(uart->port.irq, uart);
		return -EBUSY;
	}
#endif
	UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
	return 0;
}

static void bfin_serial_shutdown(struct uart_port *port)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

#ifdef CONFIG_SERIAL_BFIN_DMA
	disable_dma(uart->tx_dma_channel);
	free_dma(uart->tx_dma_channel);
	disable_dma(uart->rx_dma_channel);
	free_dma(uart->rx_dma_channel);
	del_timer(&(uart->rx_dma_timer));
#else
	free_irq(uart->port.irq, uart);
	free_irq(uart->port.irq+1, uart);
#endif
}

static void
bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
		   struct ktermios *old)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
	unsigned long flags;
	unsigned int baud, quot;
	unsigned short val, ier, lsr, lcr = 0;

	switch (termios->c_cflag & CSIZE) {
	case CS8:
		lcr = WLS(8);
		break;
	case CS7:
		lcr = WLS(7);
		break;
	case CS6:
		lcr = WLS(6);
		break;
	case CS5:
		lcr = WLS(5);
		break;
	default:
		printk(KERN_ERR "%s: word lengh not supported\n",
			__FUNCTION__);
	}

	if (termios->c_cflag & CSTOPB)
		lcr |= STB;
	if (termios->c_cflag & PARENB) {
		lcr |= PEN;
		if (!(termios->c_cflag & PARODD))
			lcr |= EPS;
	}

	/* These controls are not implemented for this port */
	termios->c_iflag |= INPCK | BRKINT | PARMRK;
	termios->c_iflag &= ~(IGNPAR | IGNBRK);

	/* These controls are not implemented for this port */
	termios->c_iflag |= INPCK | BRKINT | PARMRK;
	termios->c_iflag &= ~(IGNPAR | IGNBRK);

	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
	quot = uart_get_divisor(port, baud);
	spin_lock_irqsave(&uart->port.lock, flags);

	do {
		lsr = UART_GET_LSR(uart);
	} while (!(lsr & TEMT));

	/* Disable UART */
	ier = UART_GET_IER(uart);
	UART_PUT_IER(uart, 0);

	/* Set DLAB in LCR to Access DLL and DLH */
	val = UART_GET_LCR(uart);
	val |= DLAB;
	UART_PUT_LCR(uart, val);
	SSYNC();

	UART_PUT_DLL(uart, quot & 0xFF);
	SSYNC();
	UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
	SSYNC();

	/* Clear DLAB in LCR to Access THR RBR IER */
	val = UART_GET_LCR(uart);
	val &= ~DLAB;
	UART_PUT_LCR(uart, val);
	SSYNC();

	UART_PUT_LCR(uart, lcr);

	/* Enable UART */
	UART_PUT_IER(uart, ier);

	val = UART_GET_GCTL(uart);
	val |= UCEN;
	UART_PUT_GCTL(uart, val);

	spin_unlock_irqrestore(&uart->port.lock, flags);
}

static const char *bfin_serial_type(struct uart_port *port)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

	return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL;
}

/*
 * Release the memory region(s) being used by 'port'.
 */
static void bfin_serial_release_port(struct uart_port *port)
{
}

/*
 * Request the memory region(s) being used by 'port'.
 */
static int bfin_serial_request_port(struct uart_port *port)
{
	return 0;
}

/*
 * Configure/autoconfigure the port.
 */
static void bfin_serial_config_port(struct uart_port *port, int flags)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;

	if (flags & UART_CONFIG_TYPE &&
	    bfin_serial_request_port(&uart->port) == 0)
		uart->port.type = PORT_BFIN;
}

/*
 * Verify the new serial_struct (for TIOCSSERIAL).
 * The only change we allow are to the flags and type, and
 * even then only between PORT_BFIN and PORT_UNKNOWN
 */
static int
bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
{
	return 0;
}

static struct uart_ops bfin_serial_pops = {
	.tx_empty	= bfin_serial_tx_empty,
	.set_mctrl	= bfin_serial_set_mctrl,
	.get_mctrl	= bfin_serial_get_mctrl,
	.stop_tx	= bfin_serial_stop_tx,
	.start_tx	= bfin_serial_start_tx,
	.stop_rx	= bfin_serial_stop_rx,
	.enable_ms	= bfin_serial_enable_ms,
	.break_ctl	= bfin_serial_break_ctl,
	.startup	= bfin_serial_startup,
	.shutdown	= bfin_serial_shutdown,
	.set_termios	= bfin_serial_set_termios,
	.type		= bfin_serial_type,
	.release_port	= bfin_serial_release_port,
	.request_port	= bfin_serial_request_port,
	.config_port	= bfin_serial_config_port,
	.verify_port	= bfin_serial_verify_port,
};

static void __init bfin_serial_init_ports(void)
{
	static int first = 1;
	int i;

	if (!first)
		return;
	first = 0;

	for (i = 0; i < nr_ports; i++) {
		bfin_serial_ports[i].port.uartclk   = get_sclk();
		bfin_serial_ports[i].port.ops       = &bfin_serial_pops;
		bfin_serial_ports[i].port.line      = i;
		bfin_serial_ports[i].port.iotype    = UPIO_MEM;
		bfin_serial_ports[i].port.membase   =
			(void __iomem *)bfin_serial_resource[i].uart_base_addr;
		bfin_serial_ports[i].port.mapbase   =
			bfin_serial_resource[i].uart_base_addr;
		bfin_serial_ports[i].port.irq       =
			bfin_serial_resource[i].uart_irq;
		bfin_serial_ports[i].port.flags     = UPF_BOOT_AUTOCONF;
#ifdef CONFIG_SERIAL_BFIN_DMA
		bfin_serial_ports[i].tx_done	    = 1;
		bfin_serial_ports[i].tx_count	    = 0;
		bfin_serial_ports[i].tx_dma_channel =
			bfin_serial_resource[i].uart_tx_dma_channel;
		bfin_serial_ports[i].rx_dma_channel =
			bfin_serial_resource[i].uart_rx_dma_channel;
		init_timer(&(bfin_serial_ports[i].rx_dma_timer));
#else
		INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
		bfin_serial_ports[i].cts_pin	    =
			bfin_serial_resource[i].uart_cts_pin;
		bfin_serial_ports[i].rts_pin	    =
			bfin_serial_resource[i].uart_rts_pin;
#endif
		bfin_serial_hw_init(&bfin_serial_ports[i]);

	}
}

#ifdef CONFIG_SERIAL_BFIN_CONSOLE
static void bfin_serial_console_putchar(struct uart_port *port, int ch)
{
	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
	while (!(UART_GET_LSR(uart)))
		barrier();
	UART_PUT_CHAR(uart, ch);
	SSYNC();
}

/*
 * Interrupts are disabled on entering
 */
static void
bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
{
	struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
	int flags = 0;

	spin_lock_irqsave(&uart->port.lock, flags);
	uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
	spin_unlock_irqrestore(&uart->port.lock, flags);

}

/*
 * If the port was already initialised (eg, by a boot loader),
 * try to determine the current setup.
 */
static void __init
bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
			   int *parity, int *bits)
{
	unsigned short status;

	status = UART_GET_IER(uart) & (ERBFI | ETBEI);
	if (status == (ERBFI | ETBEI)) {
		/* ok, the port was enabled */
		unsigned short lcr, val;
		unsigned short dlh, dll;

		lcr = UART_GET_LCR(uart);

		*parity = 'n';
		if (lcr & PEN) {
			if (lcr & EPS)
				*parity = 'e';
			else
				*parity = 'o';
		}
		switch (lcr & 0x03) {
			case 0:	*bits = 5; break;
			case 1:	*bits = 6; break;
			case 2:	*bits = 7; break;
			case 3:	*bits = 8; break;
		}
		/* Set DLAB in LCR to Access DLL and DLH */
		val = UART_GET_LCR(uart);
		val |= DLAB;
		UART_PUT_LCR(uart, val);

		dll = UART_GET_DLL(uart);
		dlh = UART_GET_DLH(uart);

		/* Clear DLAB in LCR to Access THR RBR IER */
		val = UART_GET_LCR(uart);
		val &= ~DLAB;
		UART_PUT_LCR(uart, val);

		*baud = get_sclk() / (16*(dll | dlh << 8));
	}
	pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
}

static int __init
bfin_serial_console_setup(struct console *co, char *options)
{
	struct bfin_serial_port *uart;
	int baud = 57600;
	int bits = 8;
	int parity = 'n';
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
	int flow = 'r';
#else
	int flow = 'n';
#endif

	/*
	 * Check whether an invalid uart number has been specified, and
	 * if so, search for the first available port that does have
	 * console support.
	 */
	if (co->index == -1 || co->index >= nr_ports)
		co->index = 0;
	uart = &bfin_serial_ports[co->index];

	if (options)
		uart_parse_options(options, &baud, &parity, &bits, &flow);
	else
		bfin_serial_console_get_options(uart, &baud, &parity, &bits);

	return uart_set_options(&uart->port, co, baud, parity, bits, flow);
}

static struct uart_driver bfin_serial_reg;
static struct console bfin_serial_console = {
	.name		= BFIN_SERIAL_NAME,
	.write		= bfin_serial_console_write,
	.device		= uart_console_device,
	.setup		= bfin_serial_console_setup,
	.flags		= CON_PRINTBUFFER,
	.index		= -1,
	.data		= &bfin_serial_reg,
};

static int __init bfin_serial_rs_console_init(void)
{
	bfin_serial_init_ports();
	register_console(&bfin_serial_console);
	return 0;
}
console_initcall(bfin_serial_rs_console_init);

#define BFIN_SERIAL_CONSOLE	&bfin_serial_console
#else
#define BFIN_SERIAL_CONSOLE	NULL
#endif

static struct uart_driver bfin_serial_reg = {
	.owner			= THIS_MODULE,
	.driver_name		= "bfin-uart",
	.dev_name		= BFIN_SERIAL_NAME,
	.major			= BFIN_SERIAL_MAJOR,
	.minor			= BFIN_SERIAL_MINOR,
	.nr			= NR_PORTS,
	.cons			= BFIN_SERIAL_CONSOLE,
};

static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
{
	struct bfin_serial_port *uart = platform_get_drvdata(dev);

	if (uart)
		uart_suspend_port(&bfin_serial_reg, &uart->port);

	return 0;
}

static int bfin_serial_resume(struct platform_device *dev)
{
	struct bfin_serial_port *uart = platform_get_drvdata(dev);

	if (uart)
		uart_resume_port(&bfin_serial_reg, &uart->port);

	return 0;
}

static int bfin_serial_probe(struct platform_device *dev)
{
	struct resource *res = dev->resource;
	int i;

	for (i = 0; i < dev->num_resources; i++, res++)
		if (res->flags & IORESOURCE_MEM)
			break;

	if (i < dev->num_resources) {
		for (i = 0; i < nr_ports; i++, res++) {
			if (bfin_serial_ports[i].port.mapbase != res->start)
				continue;
			bfin_serial_ports[i].port.dev = &dev->dev;
			uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
			platform_set_drvdata(dev, &bfin_serial_ports[i]);
		}
	}

	return 0;
}

static int bfin_serial_remove(struct platform_device *pdev)
{
	struct bfin_serial_port *uart = platform_get_drvdata(pdev);


#ifdef CONFIG_SERIAL_BFIN_CTSRTS
	gpio_free(uart->cts_pin);
	gpio_free(uart->rts_pin);
#endif

	platform_set_drvdata(pdev, NULL);

	if (uart)
		uart_remove_one_port(&bfin_serial_reg, &uart->port);

	return 0;
}

static struct platform_driver bfin_serial_driver = {
	.probe		= bfin_serial_probe,
	.remove		= bfin_serial_remove,
	.suspend	= bfin_serial_suspend,
	.resume		= bfin_serial_resume,
	.driver		= {
		.name	= "bfin-uart",
	},
};

static int __init bfin_serial_init(void)
{
	int ret;

	pr_info("Serial: Blackfin serial driver\n");

	bfin_serial_init_ports();

	ret = uart_register_driver(&bfin_serial_reg);
	if (ret == 0) {
		ret = platform_driver_register(&bfin_serial_driver);
		if (ret) {
			pr_debug("uart register failed\n");
			uart_unregister_driver(&bfin_serial_reg);
		}
	}
	return ret;
}

static void __exit bfin_serial_exit(void)
{
	platform_driver_unregister(&bfin_serial_driver);
	uart_unregister_driver(&bfin_serial_reg);
}

module_init(bfin_serial_init);
module_exit(bfin_serial_exit);

MODULE_AUTHOR("Aubrey.Li <aubrey.li@analog.com>");
MODULE_DESCRIPTION("Blackfin generic serial port driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR);