summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c10
-rw-r--r--arch/mips/bcm47xx/serial.c2
2 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3985f35aee06..a4ca63ba7faa 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -309,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_wp = 63,
.deferred = true,
},
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
{
.name = "wl1271",
.mmc = 2,
@@ -450,7 +450,7 @@ static struct regulator_init_data omap3evm_vio = {
.consumer_supplies = omap3evm_vio_supply,
};
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
#define OMAP3EVM_WLAN_PMENA_GPIO (150)
#define OMAP3EVM_WLAN_IRQ_GPIO (149)
@@ -563,7 +563,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = {
OMAP_PIN_OFF_NONE),
OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
/* WLAN IRQ - GPIO 149 */
OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
@@ -601,7 +601,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = {
OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
/* WLAN IRQ - GPIO 149 */
OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
@@ -637,7 +637,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = {
static void __init omap3_evm_wl12xx_init(void)
{
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
int ret;
/* WL12xx WLAN Init */
diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c
index 57981e4fe2bc..b8ef965705cf 100644
--- a/arch/mips/bcm47xx/serial.c
+++ b/arch/mips/bcm47xx/serial.c
@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(void)
p->mapbase = (unsigned int) bcma_port->regs;
p->membase = (void *) bcma_port->regs;
- p->irq = bcma_port->irq + 2;
+ p->irq = bcma_port->irq;
p->uartclk = bcma_port->baud_base;
p->regshift = bcma_port->reg_shift;
p->iotype = UPIO_MEM;