diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 88 |
1 files changed, 58 insertions, 30 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9e8b99af400d..497adea1f0d6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2325,24 +2325,28 @@ int ata_dev_configure(struct ata_device *dev) } } - /* check and mark DevSlp capability */ - if (ata_id_has_devslp(dev->id)) - dev->flags |= ATA_DFLAG_DEVSLP; - - /* Obtain SATA Settings page from Identify Device Data Log, - * which contains DevSlp timing variables etc. - * Exclude old devices with ata_id_has_ncq() + /* Check and mark DevSlp capability. Get DevSlp timing variables + * from SATA Settings page of Identify Device Data Log. */ - if (ata_id_has_ncq(dev->id)) { + if (ata_id_has_devslp(dev->id)) { + u8 sata_setting[ATA_SECT_SIZE]; + int i, j; + + dev->flags |= ATA_DFLAG_DEVSLP; err_mask = ata_read_log_page(dev, ATA_LOG_SATA_ID_DEV_DATA, ATA_LOG_SATA_SETTINGS, - dev->sata_settings, + sata_setting, 1); if (err_mask) ata_dev_dbg(dev, "failed to get Identify Device Data, Emask 0x%x\n", err_mask); + else + for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) { + j = ATA_LOG_DEVSLP_OFFSET + i; + dev->devslp_timing[i] = sata_setting[j]; + } } dev->cdb_len = 16; @@ -2396,8 +2400,10 @@ int ata_dev_configure(struct ata_device *dev) dma_dir_string = ", DMADIR"; } - if (ata_id_has_da(dev->id)) + if (ata_id_has_da(dev->id)) { dev->flags |= ATA_DFLAG_DA; + zpodd_init(dev); + } /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) @@ -5327,9 +5333,6 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int *async) { - unsigned int ehi_flags = ATA_EHI_QUIET; - int rc; - /* * On some hardware, device fails to respond after spun down * for suspend. As the device won't be used before being @@ -5338,11 +5341,9 @@ static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int * * http://thread.gmane.org/gmane.linux.ide/46764 */ - if (mesg.event == PM_EVENT_SUSPEND) - ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY; - - rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, async); - return rc; + unsigned int ehi_flags = ATA_EHI_QUIET | ATA_EHI_NO_AUTOPSY | + ATA_EHI_NO_RECOVERY; + return ata_port_request_pm(ap, mesg, 0, ehi_flags, async); } static int ata_port_suspend_common(struct device *dev, pm_message_t mesg) @@ -5363,40 +5364,38 @@ static int ata_port_suspend(struct device *dev) static int ata_port_do_freeze(struct device *dev) { if (pm_runtime_suspended(dev)) - pm_runtime_resume(dev); + return 0; return ata_port_suspend_common(dev, PMSG_FREEZE); } static int ata_port_poweroff(struct device *dev) { - if (pm_runtime_suspended(dev)) - return 0; - return ata_port_suspend_common(dev, PMSG_HIBERNATE); } -static int __ata_port_resume_common(struct ata_port *ap, int *async) +static int __ata_port_resume_common(struct ata_port *ap, pm_message_t mesg, + int *async) { int rc; - rc = ata_port_request_pm(ap, PMSG_ON, ATA_EH_RESET, + rc = ata_port_request_pm(ap, mesg, ATA_EH_RESET, ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, async); return rc; } -static int ata_port_resume_common(struct device *dev) +static int ata_port_resume_common(struct device *dev, pm_message_t mesg) { struct ata_port *ap = to_ata_port(dev); - return __ata_port_resume_common(ap, NULL); + return __ata_port_resume_common(ap, mesg, NULL); } static int ata_port_resume(struct device *dev) { int rc; - rc = ata_port_resume_common(dev); + rc = ata_port_resume_common(dev, PMSG_RESUME); if (!rc) { pm_runtime_disable(dev); pm_runtime_set_active(dev); @@ -5406,11 +5405,40 @@ static int ata_port_resume(struct device *dev) return rc; } +/* + * For ODDs, the upper layer will poll for media change every few seconds, + * which will make it enter and leave suspend state every few seconds. And + * as each suspend will cause a hard/soft reset, the gain of runtime suspend + * is very little and the ODD may malfunction after constantly being reset. + * So the idle callback here will not proceed to suspend if a non-ZPODD capable + * ODD is attached to the port. + */ static int ata_port_runtime_idle(struct device *dev) { + struct ata_port *ap = to_ata_port(dev); + struct ata_link *link; + struct ata_device *adev; + + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(adev, link, ENABLED) + if (adev->class == ATA_DEV_ATAPI && + !zpodd_dev_enabled(adev)) + return -EBUSY; + } + return pm_runtime_suspend(dev); } +static int ata_port_runtime_suspend(struct device *dev) +{ + return ata_port_suspend_common(dev, PMSG_AUTO_SUSPEND); +} + +static int ata_port_runtime_resume(struct device *dev) +{ + return ata_port_resume_common(dev, PMSG_AUTO_RESUME); +} + static const struct dev_pm_ops ata_port_pm_ops = { .suspend = ata_port_suspend, .resume = ata_port_resume, @@ -5419,8 +5447,8 @@ static const struct dev_pm_ops ata_port_pm_ops = { .poweroff = ata_port_poweroff, .restore = ata_port_resume, - .runtime_suspend = ata_port_suspend, - .runtime_resume = ata_port_resume_common, + .runtime_suspend = ata_port_runtime_suspend, + .runtime_resume = ata_port_runtime_resume, .runtime_idle = ata_port_runtime_idle, }; @@ -5437,7 +5465,7 @@ EXPORT_SYMBOL_GPL(ata_sas_port_async_suspend); int ata_sas_port_async_resume(struct ata_port *ap, int *async) { - return __ata_port_resume_common(ap, async); + return __ata_port_resume_common(ap, PMSG_RESUME, async); } EXPORT_SYMBOL_GPL(ata_sas_port_async_resume); |