1 files changed, 297 insertions, 159 deletions

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 10be7b5fbe97..0815e10da7c6 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -34,20 +34,19 @@
 #include <linux/hardirq.h>
 #include <linux/irqflags.h>
 #include <linux/rwsem.h>
+#include <linux/pm_runtime.h>
 #include <asm/uaccess.h>
 
 #include "i2c-core.h"
 
 
-/* core_lock protects i2c_adapter_idr, userspace_devices, and guarantees
+/* core_lock protects i2c_adapter_idr, and guarantees
    that device detection, deletion of detected devices, and attach_adapter
    and detach_adapter calls are serialized */
 static DEFINE_MUTEX(core_lock);
 static DEFINE_IDR(i2c_adapter_idr);
-static LIST_HEAD(userspace_devices);
 
 static struct device_type i2c_client_type;
-static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
 static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
 
 /* ------------------------------------------------------------------------- */
@@ -116,8 +115,10 @@ static int i2c_device_probe(struct device *dev)
 	dev_dbg(dev, "probe\n");
 
 	status = driver->probe(client, i2c_match_id(driver->id_table, client));
-	if (status)
+	if (status) {
 		client->driver = NULL;
+		i2c_set_clientdata(client, NULL);
+	}
 	return status;
 }
 
@@ -138,8 +139,10 @@ static int i2c_device_remove(struct device *dev)
 		dev->driver = NULL;
 		status = 0;
 	}
-	if (status == 0)
+	if (status == 0) {
 		client->driver = NULL;
+		i2c_set_clientdata(client, NULL);
+	}
 	return status;
 }
 
@@ -155,36 +158,8 @@ static void i2c_device_shutdown(struct device *dev)
 		driver->shutdown(client);
 }
 
-#ifdef CONFIG_SUSPEND
-static int i2c_device_pm_suspend(struct device *dev)
-{
-	const struct dev_pm_ops *pm;
-
-	if (!dev->driver)
-		return 0;
-	pm = dev->driver->pm;
-	if (!pm || !pm->suspend)
-		return 0;
-	return pm->suspend(dev);
-}
-
-static int i2c_device_pm_resume(struct device *dev)
-{
-	const struct dev_pm_ops *pm;
-
-	if (!dev->driver)
-		return 0;
-	pm = dev->driver->pm;
-	if (!pm || !pm->resume)
-		return 0;
-	return pm->resume(dev);
-}
-#else
-#define i2c_device_pm_suspend	NULL
-#define i2c_device_pm_resume	NULL
-#endif
-
-static int i2c_device_suspend(struct device *dev, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+static int i2c_legacy_suspend(struct device *dev, pm_message_t mesg)
 {
 	struct i2c_client *client = i2c_verify_client(dev);
 	struct i2c_driver *driver;
@@ -197,7 +172,7 @@ static int i2c_device_suspend(struct device *dev, pm_message_t mesg)
 	return driver->suspend(client, mesg);
 }
 
-static int i2c_device_resume(struct device *dev)
+static int i2c_legacy_resume(struct device *dev)
 {
 	struct i2c_client *client = i2c_verify_client(dev);
 	struct i2c_driver *driver;
@@ -210,6 +185,104 @@ static int i2c_device_resume(struct device *dev)
 	return driver->resume(client);
 }
 
+static int i2c_device_pm_suspend(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm_runtime_suspended(dev))
+		return 0;
+
+	if (pm)
+		return pm->suspend ? pm->suspend(dev) : 0;
+
+	return i2c_legacy_suspend(dev, PMSG_SUSPEND);
+}
+
+static int i2c_device_pm_resume(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	int ret;
+
+	if (pm)
+		ret = pm->resume ? pm->resume(dev) : 0;
+	else
+		ret = i2c_legacy_resume(dev);
+
+	if (!ret) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
+}
+
+static int i2c_device_pm_freeze(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm_runtime_suspended(dev))
+		return 0;
+
+	if (pm)
+		return pm->freeze ? pm->freeze(dev) : 0;
+
+	return i2c_legacy_suspend(dev, PMSG_FREEZE);
+}
+
+static int i2c_device_pm_thaw(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm_runtime_suspended(dev))
+		return 0;
+
+	if (pm)
+		return pm->thaw ? pm->thaw(dev) : 0;
+
+	return i2c_legacy_resume(dev);
+}
+
+static int i2c_device_pm_poweroff(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm_runtime_suspended(dev))
+		return 0;
+
+	if (pm)
+		return pm->poweroff ? pm->poweroff(dev) : 0;
+
+	return i2c_legacy_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int i2c_device_pm_restore(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	int ret;
+
+	if (pm)
+		ret = pm->restore ? pm->restore(dev) : 0;
+	else
+		ret = i2c_legacy_resume(dev);
+
+	if (!ret) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
+}
+#else /* !CONFIG_PM_SLEEP */
+#define i2c_device_pm_suspend	NULL
+#define i2c_device_pm_resume	NULL
+#define i2c_device_pm_freeze	NULL
+#define i2c_device_pm_thaw	NULL
+#define i2c_device_pm_poweroff	NULL
+#define i2c_device_pm_restore	NULL
+#endif /* !CONFIG_PM_SLEEP */
+
 static void i2c_client_dev_release(struct device *dev)
 {
 	kfree(to_i2c_client(dev));
@@ -251,6 +324,15 @@ static const struct attribute_group *i2c_dev_attr_groups[] = {
 static const struct dev_pm_ops i2c_device_pm_ops = {
 	.suspend = i2c_device_pm_suspend,
 	.resume = i2c_device_pm_resume,
+	.freeze = i2c_device_pm_freeze,
+	.thaw = i2c_device_pm_thaw,
+	.poweroff = i2c_device_pm_poweroff,
+	.restore = i2c_device_pm_restore,
+	SET_RUNTIME_PM_OPS(
+		pm_generic_runtime_suspend,
+		pm_generic_runtime_resume,
+		pm_generic_runtime_idle
+	)
 };
 
 struct bus_type i2c_bus_type = {
@@ -259,8 +341,6 @@ struct bus_type i2c_bus_type = {
 	.probe		= i2c_device_probe,
 	.remove		= i2c_device_remove,
 	.shutdown	= i2c_device_shutdown,
-	.suspend	= i2c_device_suspend,
-	.resume		= i2c_device_resume,
 	.pm		= &i2c_device_pm_ops,
 };
 EXPORT_SYMBOL_GPL(i2c_bus_type);
@@ -290,6 +370,59 @@ struct i2c_client *i2c_verify_client(struct device *dev)
 EXPORT_SYMBOL(i2c_verify_client);
 
 
+/* This is a permissive address validity check, I2C address map constraints
+ * are purposedly not enforced, except for the general call address. */
+static int i2c_check_client_addr_validity(const struct i2c_client *client)
+{
+	if (client->flags & I2C_CLIENT_TEN) {
+		/* 10-bit address, all values are valid */
+		if (client->addr > 0x3ff)
+			return -EINVAL;
+	} else {
+		/* 7-bit address, reject the general call address */
+		if (client->addr == 0x00 || client->addr > 0x7f)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+/* And this is a strict address validity check, used when probing. If a
+ * device uses a reserved address, then it shouldn't be probed. 7-bit
+ * addressing is assumed, 10-bit address devices are rare and should be
+ * explicitly enumerated. */
+static int i2c_check_addr_validity(unsigned short addr)
+{
+	/*
+	 * Reserved addresses per I2C specification:
+	 *  0x00       General call address / START byte
+	 *  0x01       CBUS address
+	 *  0x02       Reserved for different bus format
+	 *  0x03       Reserved for future purposes
+	 *  0x04-0x07  Hs-mode master code
+	 *  0x78-0x7b  10-bit slave addressing
+	 *  0x7c-0x7f  Reserved for future purposes
+	 */
+	if (addr < 0x08 || addr > 0x77)
+		return -EINVAL;
+	return 0;
+}
+
+static int __i2c_check_addr_busy(struct device *dev, void *addrp)
+{
+	struct i2c_client	*client = i2c_verify_client(dev);
+	int			addr = *(int *)addrp;
+
+	if (client && client->addr == addr)
+		return -EBUSY;
+	return 0;
+}
+
+static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
+{
+	return device_for_each_child(&adapter->dev, &addr,
+				     __i2c_check_addr_busy);
+}
+
 /**
  * i2c_new_device - instantiate an i2c device
  * @adap: the adapter managing the device
@@ -329,14 +462,25 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 
 	strlcpy(client->name, info->type, sizeof(client->name));
 
+	/* Check for address validity */
+	status = i2c_check_client_addr_validity(client);
+	if (status) {
+		dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n",
+			client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr);
+		goto out_err_silent;
+	}
+
 	/* Check for address business */
-	status = i2c_check_addr(adap, client->addr);
+	status = i2c_check_addr_busy(adap, client->addr);
 	if (status)
 		goto out_err;
 
 	client->dev.parent = &client->adapter->dev;
 	client->dev.bus = &i2c_bus_type;
 	client->dev.type = &i2c_client_type;
+#ifdef CONFIG_OF
+	client->dev.of_node = info->of_node;
+#endif
 
 	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
 		     client->addr);
@@ -352,6 +496,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 out_err:
 	dev_err(&adap->dev, "Failed to register i2c client %s at 0x%02x "
 		"(%d)\n", client->name, client->addr, status);
+out_err_silent:
 	kfree(client);
 	return NULL;
 }
@@ -477,20 +622,14 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 	}
 
-	if (info.addr < 0x03 || info.addr > 0x77) {
-		dev_err(dev, "%s: Invalid I2C address 0x%hx\n", "new_device",
-			info.addr);
-		return -EINVAL;
-	}
-
 	client = i2c_new_device(adap, &info);
 	if (!client)
-		return -EEXIST;
+		return -EINVAL;
 
 	/* Keep track of the added device */
-	mutex_lock(&core_lock);
-	list_add_tail(&client->detected, &userspace_devices);
-	mutex_unlock(&core_lock);
+	i2c_lock_adapter(adap);
+	list_add_tail(&client->detected, &adap->userspace_clients);
+	i2c_unlock_adapter(adap);
 	dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
 		 info.type, info.addr);
 
@@ -529,9 +668,10 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
 
 	/* Make sure the device was added through sysfs */
 	res = -ENOENT;
-	mutex_lock(&core_lock);
-	list_for_each_entry_safe(client, next, &userspace_devices, detected) {
-		if (client->addr == addr && client->adapter == adap) {
+	i2c_lock_adapter(adap);
+	list_for_each_entry_safe(client, next, &adap->userspace_clients,
+				 detected) {
+		if (client->addr == addr) {
 			dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
 				 "delete_device", client->name, client->addr);
 
@@ -541,7 +681,7 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
 			break;
 		}
 	}
-	mutex_unlock(&core_lock);
+	i2c_unlock_adapter(adap);
 
 	if (res < 0)
 		dev_err(dev, "%s: Can't find device in list\n",
@@ -623,6 +763,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	}
 
 	rt_mutex_init(&adap->bus_lock);
+	INIT_LIST_HEAD(&adap->userspace_clients);
 
 	/* Set default timeout to 1 second if not already set */
 	if (adap->timeout == 0)
@@ -825,14 +966,15 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 		return res;
 
 	/* Remove devices instantiated from sysfs */
-	list_for_each_entry_safe(client, next, &userspace_devices, detected) {
-		if (client->adapter == adap) {
-			dev_dbg(&adap->dev, "Removing %s at 0x%x\n",
-				client->name, client->addr);
-			list_del(&client->detected);
-			i2c_unregister_device(client);
-		}
+	i2c_lock_adapter(adap);
+	list_for_each_entry_safe(client, next, &adap->userspace_clients,
+				 detected) {
+		dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
+			client->addr);
+		list_del(&client->detected);
+		i2c_unregister_device(client);
 	}
+	i2c_unlock_adapter(adap);
 
 	/* Detach any active clients. This can't fail, thus we do not
 	   checking the returned value. */
@@ -937,21 +1079,6 @@ EXPORT_SYMBOL(i2c_del_driver);
 
 /* ------------------------------------------------------------------------- */
 
-static int __i2c_check_addr(struct device *dev, void *addrp)
-{
-	struct i2c_client	*client = i2c_verify_client(dev);
-	int			addr = *(int *)addrp;
-
-	if (client && client->addr == addr)
-		return -EBUSY;
-	return 0;
-}
-
-static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
-{
-	return device_for_each_child(&adapter->dev, &addr, __i2c_check_addr);
-}
-
 /**
  * i2c_use_client - increments the reference count of the i2c client structure
  * @client: the client being referenced
@@ -1133,14 +1260,14 @@ EXPORT_SYMBOL(i2c_transfer);
  * i2c_master_send - issue a single I2C message in master transmit mode
  * @client: Handle to slave device
  * @buf: Data that will be written to the slave
- * @count: How many bytes to write
+ * @count: How many bytes to write, must be less than 64k since msg.len is u16
  *
  * Returns negative errno, or else the number of bytes written.
  */
-int i2c_master_send(struct i2c_client *client,const char *buf ,int count)
+int i2c_master_send(struct i2c_client *client, const char *buf, int count)
 {
 	int ret;
-	struct i2c_adapter *adap=client->adapter;
+	struct i2c_adapter *adap = client->adapter;
 	struct i2c_msg msg;
 
 	msg.addr = client->addr;
@@ -1160,13 +1287,13 @@ EXPORT_SYMBOL(i2c_master_send);
  * i2c_master_recv - issue a single I2C message in master receive mode
  * @client: Handle to slave device
  * @buf: Where to store data read from slave
- * @count: How many bytes to read
+ * @count: How many bytes to read, must be less than 64k since msg.len is u16
  *
  * Returns negative errno, or else the number of bytes read.
  */
-int i2c_master_recv(struct i2c_client *client, char *buf ,int count)
+int i2c_master_recv(struct i2c_client *client, char *buf, int count)
 {
-	struct i2c_adapter *adap=client->adapter;
+	struct i2c_adapter *adap = client->adapter;
 	struct i2c_msg msg;
 	int ret;
 
@@ -1190,6 +1317,41 @@ EXPORT_SYMBOL(i2c_master_recv);
  * ----------------------------------------------------
  */
 
+/*
+ * Legacy default probe function, mostly relevant for SMBus. The default
+ * probe method is a quick write, but it is known to corrupt the 24RF08
+ * EEPROMs due to a state machine bug, and could also irreversibly
+ * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f,
+ * we use a short byte read instead. Also, some bus drivers don't implement
+ * quick write, so we fallback to a byte read in that case too.
+ * On x86, there is another special case for FSC hardware monitoring chips,
+ * which want regular byte reads (address 0x73.) Fortunately, these are the
+ * only known chips using this I2C address on PC hardware.
+ * Returns 1 if probe succeeded, 0 if not.
+ */
+static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
+{
+	int err;
+	union i2c_smbus_data dummy;
+
+#ifdef CONFIG_X86
+	if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON)
+	 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA))
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+				     I2C_SMBUS_BYTE_DATA, &dummy);
+	else
+#endif
+	if ((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50
+	 || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
+				     I2C_SMBUS_BYTE, &dummy);
+	else
+		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
+				     I2C_SMBUS_QUICK, NULL);
+
+	return err >= 0;
+}
+
 static int i2c_detect_address(struct i2c_client *temp_client,
 			      struct i2c_driver *driver)
 {
@@ -1199,24 +1361,21 @@ static int i2c_detect_address(struct i2c_client *temp_client,
 	int err;
 
 	/* Make sure the address is valid */
-	if (addr < 0x03 || addr > 0x77) {
+	err = i2c_check_addr_validity(addr);
+	if (err) {
 		dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
 			 addr);
-		return -EINVAL;
+		return err;
 	}
 
 	/* Skip if already in use */
-	if (i2c_check_addr(adapter, addr))
+	if (i2c_check_addr_busy(adapter, addr))
 		return 0;
 
 	/* Make sure there is something at this address */
-	if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0)
+	if (!i2c_default_probe(adapter, addr))
 		return 0;
 
-	/* Prevent 24RF08 corruption */
-	if ((addr & ~0x0f) == 0x50)
-		i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL);
-
 	/* Finally call the custom detection function */
 	memset(&info, 0, sizeof(struct i2c_board_info));
 	info.addr = addr;
@@ -1269,13 +1428,12 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 	if (!(adapter->class & driver->class))
 		goto exit_free;
 
-	/* Stop here if we can't use SMBUS_QUICK */
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
+	/* Stop here if the bus doesn't support probing */
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE)) {
 		if (address_list[0] == I2C_CLIENT_END)
 			goto exit_free;
 
-		dev_warn(&adapter->dev, "SMBus Quick command not supported, "
-			 "can't probe for chips\n");
+		dev_warn(&adapter->dev, "Probing not supported\n");
 		err = -EOPNOTSUPP;
 		goto exit_free;
 	}
@@ -1309,42 +1467,22 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 
 	for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
 		/* Check address validity */
-		if (addr_list[i] < 0x03 || addr_list[i] > 0x77) {
+		if (i2c_check_addr_validity(addr_list[i]) < 0) {
 			dev_warn(&adap->dev, "Invalid 7-bit address "
 				 "0x%02x\n", addr_list[i]);
 			continue;
 		}
 
 		/* Check address availability */
-		if (i2c_check_addr(adap, addr_list[i])) {
+		if (i2c_check_addr_busy(adap, addr_list[i])) {
 			dev_dbg(&adap->dev, "Address 0x%02x already in "
 				"use, not probing\n", addr_list[i]);
 			continue;
 		}
 
-		/* Test address responsiveness
-		   The default probe method is a quick write, but it is known
-		   to corrupt the 24RF08 EEPROMs due to a state machine bug,
-		   and could also irreversibly write-protect some EEPROMs, so
-		   for address ranges 0x30-0x37 and 0x50-0x5f, we use a byte
-		   read instead. Also, some bus drivers don't implement
-		   quick write, so we fallback to a byte read it that case
-		   too. */
-		if ((addr_list[i] & ~0x07) == 0x30
-		 || (addr_list[i] & ~0x0f) == 0x50
-		 || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) {
-			union i2c_smbus_data data;
-
-			if (i2c_smbus_xfer(adap, addr_list[i], 0,
-					   I2C_SMBUS_READ, 0,
-					   I2C_SMBUS_BYTE, &data) >= 0)
-				break;
-		} else {
-			if (i2c_smbus_xfer(adap, addr_list[i], 0,
-					   I2C_SMBUS_WRITE, 0,
-					   I2C_SMBUS_QUICK, NULL) >= 0)
-				break;
-		}
+		/* Test address responsiveness */
+		if (i2c_default_probe(adap, addr_list[i]))
+			break;
 	}
 
 	if (addr_list[i] == I2C_CLIENT_END) {
@@ -1357,7 +1495,7 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 }
 EXPORT_SYMBOL_GPL(i2c_new_probed_device);
 
-struct i2c_adapter* i2c_get_adapter(int id)
+struct i2c_adapter *i2c_get_adapter(int id)
 {
 	struct i2c_adapter *adapter;
 
@@ -1384,7 +1522,7 @@ static u8 crc8(u16 data)
 {
 	int i;
 
-	for(i = 0; i < 8; i++) {
+	for (i = 0; i < 8; i++) {
 		if (data & 0x8000)
 			data = data ^ POLY;
 		data = data << 1;
@@ -1397,7 +1535,7 @@ static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
 {
 	int i;
 
-	for(i = 0; i < count; i++)
+	for (i = 0; i < count; i++)
 		crc = crc8((crc ^ p[i]) << 8);
 	return crc;
 }
@@ -1467,7 +1605,7 @@ EXPORT_SYMBOL(i2c_smbus_read_byte);
  */
 s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
 {
-	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
 	                      I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
 }
 EXPORT_SYMBOL(i2c_smbus_write_byte);
@@ -1505,9 +1643,9 @@ s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
 {
 	union i2c_smbus_data data;
 	data.byte = value;
-	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
-	                      I2C_SMBUS_WRITE,command,
-	                      I2C_SMBUS_BYTE_DATA,&data);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_BYTE_DATA, &data);
 }
 EXPORT_SYMBOL(i2c_smbus_write_byte_data);
 
@@ -1544,9 +1682,9 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
 {
 	union i2c_smbus_data data;
 	data.word = value;
-	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
-	                      I2C_SMBUS_WRITE,command,
-	                      I2C_SMBUS_WORD_DATA,&data);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_WORD_DATA, &data);
 }
 EXPORT_SYMBOL(i2c_smbus_write_word_data);
 
@@ -1623,9 +1761,9 @@ s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
 		length = I2C_SMBUS_BLOCK_MAX;
 	data.block[0] = length;
 	memcpy(&data.block[1], values, length);
-	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
-			      I2C_SMBUS_WRITE,command,
-			      I2C_SMBUS_BLOCK_DATA,&data);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_BLOCK_DATA, &data);
 }
 EXPORT_SYMBOL(i2c_smbus_write_block_data);
 
@@ -1667,10 +1805,10 @@ EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
 
 /* Simulate a SMBus command using the i2c protocol
    No checking of parameters is done!  */
-static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
-                                   unsigned short flags,
-                                   char read_write, u8 command, int size,
-                                   union i2c_smbus_data * data)
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
+				   unsigned short flags,
+				   char read_write, u8 command, int size,
+				   union i2c_smbus_data *data)
 {
 	/* So we need to generate a series of msgs. In the case of writing, we
 	  need to use only one message; when reading, we need two. We initialize
@@ -1678,7 +1816,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 	  simpler. */
 	unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
 	unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
-	int num = read_write == I2C_SMBUS_READ?2:1;
+	int num = read_write == I2C_SMBUS_READ ? 2 : 1;
 	struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
 	                          { addr, flags | I2C_M_RD, 0, msgbuf1 }
 	                        };
@@ -1687,7 +1825,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 	int status;
 
 	msgbuf0[0] = command;
-	switch(size) {
+	switch (size) {
 	case I2C_SMBUS_QUICK:
 		msg[0].len = 0;
 		/* Special case: The read/write field is used as data */
@@ -1714,7 +1852,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 		if (read_write == I2C_SMBUS_READ)
 			msg[1].len = 2;
 		else {
-			msg[0].len=3;
+			msg[0].len = 3;
 			msgbuf0[1] = data->word & 0xff;
 			msgbuf0[2] = data->word >> 8;
 		}
@@ -1807,26 +1945,26 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 	}
 
 	if (read_write == I2C_SMBUS_READ)
-		switch(size) {
-			case I2C_SMBUS_BYTE:
-				data->byte = msgbuf0[0];
-				break;
-			case I2C_SMBUS_BYTE_DATA:
-				data->byte = msgbuf1[0];
-				break;
-			case I2C_SMBUS_WORD_DATA:
-			case I2C_SMBUS_PROC_CALL:
-				data->word = msgbuf1[0] | (msgbuf1[1] << 8);
-				break;
-			case I2C_SMBUS_I2C_BLOCK_DATA:
-				for (i = 0; i < data->block[0]; i++)
-					data->block[i+1] = msgbuf1[i];
-				break;
-			case I2C_SMBUS_BLOCK_DATA:
-			case I2C_SMBUS_BLOCK_PROC_CALL:
-				for (i = 0; i < msgbuf1[0] + 1; i++)
-					data->block[i] = msgbuf1[i];
-				break;
+		switch (size) {
+		case I2C_SMBUS_BYTE:
+			data->byte = msgbuf0[0];
+			break;
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = msgbuf1[0];
+			break;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			data->word = msgbuf1[0] | (msgbuf1[1] << 8);
+			break;
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			for (i = 0; i < data->block[0]; i++)
+				data->block[i+1] = msgbuf1[i];
+			break;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			for (i = 0; i < msgbuf1[0] + 1; i++)
+				data->block[i] = msgbuf1[i];
+			break;
 		}
 	return 0;
 }
@@ -1871,7 +2009,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 		}
 		rt_mutex_unlock(&adapter->bus_lock);
 	} else
-		res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
+		res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
 					      command, protocol, data);
 
 	return res;