summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c263
1 files changed, 96 insertions, 167 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 9520a6ac1f30..623e30b9964d 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -56,7 +56,7 @@
#define DRV_EXTRAVERSION "-k"
-#define DRV_VERSION "1.9.5" DRV_EXTRAVERSION
+#define DRV_VERSION "2.0.0" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@@ -79,6 +79,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
[board_ich10lan] = &e1000_ich10_info,
[board_pchlan] = &e1000_pch_info,
[board_pch2lan] = &e1000_pch2_info,
+ [board_pch_lpt] = &e1000_pch_lpt_info,
};
struct e1000_reg_info {
@@ -110,14 +111,14 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = {
/* Rx Registers */
{E1000_RCTL, "RCTL"},
- {E1000_RDLEN, "RDLEN"},
- {E1000_RDH, "RDH"},
- {E1000_RDT, "RDT"},
+ {E1000_RDLEN(0), "RDLEN"},
+ {E1000_RDH(0), "RDH"},
+ {E1000_RDT(0), "RDT"},
{E1000_RDTR, "RDTR"},
{E1000_RXDCTL(0), "RXDCTL"},
{E1000_ERT, "ERT"},
- {E1000_RDBAL, "RDBAL"},
- {E1000_RDBAH, "RDBAH"},
+ {E1000_RDBAL(0), "RDBAL"},
+ {E1000_RDBAH(0), "RDBAH"},
{E1000_RDFH, "RDFH"},
{E1000_RDFT, "RDFT"},
{E1000_RDFHS, "RDFHS"},
@@ -126,11 +127,11 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = {
/* Tx Registers */
{E1000_TCTL, "TCTL"},
- {E1000_TDBAL, "TDBAL"},
- {E1000_TDBAH, "TDBAH"},
- {E1000_TDLEN, "TDLEN"},
- {E1000_TDH, "TDH"},
- {E1000_TDT, "TDT"},
+ {E1000_TDBAL(0), "TDBAL"},
+ {E1000_TDBAH(0), "TDBAH"},
+ {E1000_TDLEN(0), "TDLEN"},
+ {E1000_TDH(0), "TDH"},
+ {E1000_TDT(0), "TDT"},
{E1000_TIDV, "TIDV"},
{E1000_TXDCTL(0), "TXDCTL"},
{E1000_TADV, "TADV"},
@@ -495,7 +496,7 @@ static void e1000_receive_skb(struct e1000_adapter *adapter,
* @sk_buff: socket buffer with received data
**/
static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
- __le16 csum, struct sk_buff *skb)
+ struct sk_buff *skb)
{
u16 status = (u16)status_err;
u8 errors = (u8)(status_err >> 24);
@@ -510,8 +511,8 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
if (status & E1000_RXD_STAT_IXSM)
return;
- /* TCP/UDP checksum error bit is set */
- if (errors & E1000_RXD_ERR_TCPE) {
+ /* TCP/UDP checksum error bit or IP checksum error bit is set */
+ if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) {
/* let the stack verify checksum errors */
adapter->hw_csum_err++;
return;
@@ -522,59 +523,19 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
return;
/* It must be a TCP or UDP packet with a valid checksum */
- if (status & E1000_RXD_STAT_TCPCS) {
- /* TCP checksum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else {
- /*
- * IP fragment with UDP payload
- * Hardware complements the payload checksum, so we undo it
- * and then put the value in host order for further stack use.
- */
- __sum16 sum = (__force __sum16)swab16((__force u16)csum);
- skb->csum = csum_unfold(~sum);
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
adapter->hw_csum_good++;
}
-/**
- * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa()
- * @hw: pointer to the HW structure
- * @tail: address of tail descriptor register
- * @i: value to write to tail descriptor register
- *
- * When updating the tail register, the ME could be accessing Host CSR
- * registers at the same time. Normally, this is handled in h/w by an
- * arbiter but on some parts there is a bug that acknowledges Host accesses
- * later than it should which could result in the descriptor register to
- * have an incorrect value. Workaround this by checking the FWSM register
- * which has bit 24 set while ME is accessing Host CSR registers, wait
- * if it is set and try again a number of times.
- **/
-static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, void __iomem *tail,
- unsigned int i)
-{
- unsigned int j = 0;
-
- while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) &&
- (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI))
- udelay(50);
-
- writel(i, tail);
-
- if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail)))
- return E1000_ERR_SWFW_SYNC;
-
- return 0;
-}
-
static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i)
{
struct e1000_adapter *adapter = rx_ring->adapter;
struct e1000_hw *hw = &adapter->hw;
+ s32 ret_val = __ew32_prepare(hw);
+
+ writel(i, rx_ring->tail);
- if (e1000e_update_tail_wa(hw, rx_ring->tail, i)) {
+ if (unlikely(!ret_val && (i != readl(rx_ring->tail)))) {
u32 rctl = er32(RCTL);
ew32(RCTL, rctl & ~E1000_RCTL_EN);
e_err("ME firmware caused invalid RDT - resetting\n");
@@ -586,8 +547,11 @@ static void e1000e_update_tdt_wa(struct e1000_ring *tx_ring, unsigned int i)
{
struct e1000_adapter *adapter = tx_ring->adapter;
struct e1000_hw *hw = &adapter->hw;
+ s32 ret_val = __ew32_prepare(hw);
- if (e1000e_update_tail_wa(hw, tx_ring->tail, i)) {
+ writel(i, tx_ring->tail);
+
+ if (unlikely(!ret_val && (i != readl(tx_ring->tail)))) {
u32 tctl = er32(TCTL);
ew32(TCTL, tctl & ~E1000_TCTL_EN);
e_err("ME firmware caused invalid TDT - resetting\n");
@@ -978,8 +942,7 @@ static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done,
skb_put(skb, length);
/* Receive Checksum Offload */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
@@ -1053,7 +1016,8 @@ static void e1000_print_hw_hang(struct work_struct *work)
if (!adapter->tx_hang_recheck &&
(adapter->flags2 & FLAG2_DMA_BURST)) {
- /* May be block on write-back, flush and detect again
+ /*
+ * May be block on write-back, flush and detect again
* flush pending descriptor writebacks to memory
*/
ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
@@ -1108,6 +1072,10 @@ static void e1000_print_hw_hang(struct work_struct *work)
phy_1000t_status,
phy_ext_status,
pci_status);
+
+ /* Suggest workaround for known h/w issue */
+ if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE))
+ e_err("Try turning off Tx pause (flow control) via ethtool\n");
}
/**
@@ -1360,8 +1328,7 @@ copydone:
total_rx_bytes += skb->len;
total_rx_packets++;
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
@@ -1531,9 +1498,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
}
}
- /* Receive Checksum Offload XXX recompute due to CRC strip? */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
@@ -1645,7 +1611,10 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
adapter->flags2 &= ~FLAG2_IS_DISCARDING;
writel(0, rx_ring->head);
- writel(0, rx_ring->tail);
+ if (rx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_rdt_wa(rx_ring, 0);
+ else
+ writel(0, rx_ring->tail);
}
static void e1000e_downshift_workaround(struct work_struct *work)
@@ -2318,7 +2287,10 @@ static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
tx_ring->next_to_clean = 0;
writel(0, tx_ring->head);
- writel(0, tx_ring->tail);
+ if (tx_ring->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+ e1000e_update_tdt_wa(tx_ring, 0);
+ else
+ writel(0, tx_ring->tail);
}
/**
@@ -2530,33 +2502,31 @@ err:
}
/**
- * e1000_clean - NAPI Rx polling callback
+ * e1000e_poll - NAPI Rx polling callback
* @napi: struct associated with this polling callback
- * @budget: amount of packets driver is allowed to process this poll
+ * @weight: number of packets driver is allowed to process this poll
**/
-static int e1000_clean(struct napi_struct *napi, int budget)
+static int e1000e_poll(struct napi_struct *napi, int weight)
{
- struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
+ napi);
struct e1000_hw *hw = &adapter->hw;
struct net_device *poll_dev = adapter->netdev;
int tx_cleaned = 1, work_done = 0;
adapter = netdev_priv(poll_dev);
- if (adapter->msix_entries &&
- !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
- goto clean_rx;
+ if (!adapter->msix_entries ||
+ (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
+ tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring);
- tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring);
-
-clean_rx:
- adapter->clean_rx(adapter->rx_ring, &work_done, budget);
+ adapter->clean_rx(adapter->rx_ring, &work_done, weight);
if (!tx_cleaned)
- work_done = budget;
+ work_done = weight;
- /* If budget not fully consumed, exit the polling mode */
- if (work_done < budget) {
+ /* If weight not fully consumed, exit the polling mode */
+ if (work_done < weight) {
if (adapter->itr_setting & 3)
e1000_set_itr(adapter);
napi_complete(napi);
@@ -2800,13 +2770,13 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
/* Setup the HW Tx Head and Tail descriptor pointers */
tdba = tx_ring->dma;
tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
- ew32(TDBAL, (tdba & DMA_BIT_MASK(32)));
- ew32(TDBAH, (tdba >> 32));
- ew32(TDLEN, tdlen);
- ew32(TDH, 0);
- ew32(TDT, 0);
- tx_ring->head = adapter->hw.hw_addr + E1000_TDH;
- tx_ring->tail = adapter->hw.hw_addr + E1000_TDT;
+ ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
+ ew32(TDBAH(0), (tdba >> 32));
+ ew32(TDLEN(0), tdlen);
+ ew32(TDH(0), 0);
+ ew32(TDT(0), 0);
+ tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0);
+ tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0);
/* Set the Tx Interrupt Delay register */
ew32(TIDV, adapter->tx_int_delay);
@@ -2879,8 +2849,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
u32 rctl, rfctl;
u32 pages = 0;
- /* Workaround Si errata on 82579 - configure jumbo frame flow */
- if (hw->mac.type == e1000_pch2lan) {
+ /* Workaround Si errata on PCHx - configure jumbo frame flow */
+ if (hw->mac.type >= e1000_pch2lan) {
s32 ret_val;
if (adapter->netdev->mtu > ETH_DATA_LEN)
@@ -2955,6 +2925,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
/* Enable Extended Status in all Receive Descriptors */
rfctl = er32(RFCTL);
rfctl |= E1000_RFCTL_EXTEN;
+ ew32(RFCTL, rfctl);
/*
* 82571 and greater support packet-split where the protocol
@@ -2980,13 +2951,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
if (adapter->rx_ps_pages) {
u32 psrctl = 0;
- /*
- * disable packet split support for IPv6 extension headers,
- * because some malformed IPv6 headers can hang the Rx
- */
- rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
- E1000_RFCTL_NEW_IPV6_EXT_DIS);
-
/* Enable Packet split descriptors */
rctl |= E1000_RCTL_DTYP_PS;
@@ -3025,7 +2989,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
*/
}
- ew32(RFCTL, rfctl);
ew32(RCTL, rctl);
/* just started the receive unit, no need to restart */
adapter->flags &= ~FLAG_RX_RESTART_NOW;
@@ -3110,29 +3073,20 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
* the Base and Length of the Rx Descriptor Ring
*/
rdba = rx_ring->dma;
- ew32(RDBAL, (rdba & DMA_BIT_MASK(32)));
- ew32(RDBAH, (rdba >> 32));
- ew32(RDLEN, rdlen);
- ew32(RDH, 0);
- ew32(RDT, 0);
- rx_ring->head = adapter->hw.hw_addr + E1000_RDH;
- rx_ring->tail = adapter->hw.hw_addr + E1000_RDT;
+ ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
+ ew32(RDBAH(0), (rdba >> 32));
+ ew32(RDLEN(0), rdlen);
+ ew32(RDH(0), 0);
+ ew32(RDT(0), 0);
+ rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0);
+ rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0);
/* Enable Receive Checksum Offload for TCP and UDP */
rxcsum = er32(RXCSUM);
- if (adapter->netdev->features & NETIF_F_RXCSUM) {
+ if (adapter->netdev->features & NETIF_F_RXCSUM)
rxcsum |= E1000_RXCSUM_TUOFL;
-
- /*
- * IPv4 payload checksum for UDP fragments must be
- * used in conjunction with packet-split.
- */
- if (adapter->rx_ps_pages)
- rxcsum |= E1000_RXCSUM_IPPCSE;
- } else {
+ else
rxcsum &= ~E1000_RXCSUM_TUOFL;
- /* no need to clear IPPCSE as it defaults to 0 */
- }
ew32(RXCSUM, rxcsum);
if (adapter->hw.mac.type == e1000_pch2lan) {
@@ -3229,7 +3183,7 @@ static int e1000e_write_uc_addr_list(struct net_device *netdev)
netdev_for_each_uc_addr(ha, netdev) {
if (!rar_entries)
break;
- e1000e_rar_set(hw, ha->addr, rar_entries--);
+ hw->mac.ops.rar_set(hw, ha->addr, rar_entries--);
count++;
}
}
@@ -3510,6 +3464,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
fc->refresh_time = 0x1000;
break;
case e1000_pch2lan:
+ case e1000_pch_lpt:
fc->high_water = 0x05C20;
fc->low_water = 0x05048;
fc->pause_time = 0x0650;
@@ -4038,6 +3993,7 @@ static int e1000_close(struct net_device *netdev)
static int e1000_set_mac(struct net_device *netdev, void *p)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
@@ -4046,7 +4002,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
- e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
+ hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
/* activate the work around */
@@ -4060,9 +4016,8 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
* are dropped. Eventually the LAA will be in RAR[0] and
* RAR[14]
*/
- e1000e_rar_set(&adapter->hw,
- adapter->hw.mac.addr,
- adapter->hw.mac.rar_entry_count - 1);
+ hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr,
+ adapter->hw.mac.rar_entry_count - 1);
}
return 0;
@@ -4641,7 +4596,7 @@ link_up:
* reset from the other port. Set the appropriate LAA in RAR[0]
*/
if (e1000e_get_laa_state_82571(hw))
- e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
+ hw->mac.ops.rar_set(hw, adapter->hw.mac.addr, 0);
if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
e1000e_check_82574_phy_workaround(adapter);
@@ -5151,6 +5106,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
/* if count is 0 then mapping error has occurred */
count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss);
if (count) {
+ skb_tx_timestamp(skb);
+
netdev_sent_queue(netdev, skb->len);
e1000_tx_queue(tx_ring, tx_flags, count);
/* Make sure there is space in the ring for the next send. */
@@ -5260,22 +5217,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
/* Jumbo frame support */
- if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
- if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
- e_err("Jumbo Frames not supported.\n");
- return -EINVAL;
- }
-
- /*
- * IP payload checksum (enabled with jumbos/packet-split when
- * Rx checksum is enabled) and generation of RSS hash is
- * mutually exclusive in the hardware.
- */
- if ((netdev->features & NETIF_F_RXCSUM) &&
- (netdev->features & NETIF_F_RXHASH)) {
- e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n");
- return -EINVAL;
- }
+ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+ e_err("Jumbo Frames not supported.\n");
+ return -EINVAL;
}
/* Supported frame sizes */
@@ -5285,22 +5230,14 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
return -EINVAL;
}
- /* Jumbo frame workaround on 82579 requires CRC be stripped */
- if ((adapter->hw.mac.type == e1000_pch2lan) &&
+ /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
+ if ((adapter->hw.mac.type >= e1000_pch2lan) &&
!(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
(new_mtu > ETH_DATA_LEN)) {
- e_err("Jumbo Frames not supported on 82579 when CRC stripping is disabled.\n");
+ e_err("Jumbo Frames not supported on this device when CRC stripping is disabled.\n");
return -EINVAL;
}
- /* 82573 Errata 17 */
- if (((adapter->hw.mac.type == e1000_82573) ||
- (adapter->hw.mac.type == e1000_82574)) &&
- (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) {
- adapter->flags2 |= FLAG2_DISABLE_ASPM_L1;
- e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
- }
-
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
usleep_range(1000, 2000);
/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
@@ -5694,7 +5631,7 @@ static int __e1000_resume(struct pci_dev *pdev)
return err;
}
- if (hw->mac.type == e1000_pch2lan)
+ if (hw->mac.type >= e1000_pch2lan)
e1000_resume_workarounds_pchlan(&adapter->hw);
e1000e_power_up_phy(adapter);
@@ -6057,17 +5994,6 @@ static int e1000_set_features(struct net_device *netdev,
NETIF_F_RXALL)))
return 0;
- /*
- * IP payload checksum (enabled with jumbos/packet-split when Rx
- * checksum is enabled) and generation of RSS hash is mutually
- * exclusive in the hardware.
- */
- if (adapter->rx_ps_pages &&
- (features & NETIF_F_RXCSUM) && (features & NETIF_F_RXHASH)) {
- e_err("Enabling both receive checksum offload and receive hashing is not possible with jumbo frames. Disable jumbos or enable only one of the receive offload features.\n");
- return -EINVAL;
- }
-
if (changed & NETIF_F_RXFCS) {
if (features & NETIF_F_RXFCS) {
adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
@@ -6226,7 +6152,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
netdev->netdev_ops = &e1000e_netdev_ops;
e1000e_set_ethtool_ops(netdev);
netdev->watchdog_timeo = 5 * HZ;
- netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
+ netif_napi_add(netdev, &adapter->napi, e1000e_poll, 64);
strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
netdev->mem_start = mmio_start;
@@ -6264,7 +6190,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->hw.phy.ms_type = e1000_ms_hw_default;
}
- if (hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
e_info("PHY reset is blocked due to SOL/IDER session.\n");
/* Set initial default active device features */
@@ -6431,7 +6357,7 @@ err_register:
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_release_hw_control(adapter);
err_eeprom:
- if (!hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
e1000_phy_hw_reset(&adapter->hw);
err_hw_init:
kfree(adapter->tx_ring);
@@ -6593,6 +6519,9 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_LM), board_pch_lpt },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt },
+
{ 0, 0, 0, 0, 0, 0, 0 } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);