summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c10
-rw-r--r--drivers/net/ethernet/intel/e1000e/ethtool.c41
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c36
-rw-r--r--drivers/net/ethernet/intel/e1000e/phy.c31
4 files changed, 99 insertions, 19 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 0b3bade957fd..080c89093feb 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -999,7 +999,7 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
**/
static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
{
- u32 ctrl, ctrl_ext, eecd;
+ u32 ctrl, ctrl_ext, eecd, tctl;
s32 ret_val;
/*
@@ -1014,7 +1014,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
ew32(IMC, 0xffffffff);
ew32(RCTL, 0);
- ew32(TCTL, E1000_TCTL_PSP);
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ ew32(TCTL, tctl);
e1e_flush();
usleep_range(10000, 20000);
@@ -1601,10 +1603,8 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
* auto-negotiation in the TXCW register and disable
* forced link in the Device Control register in an
* attempt to auto-negotiate with our link partner.
- * If the partner code word is null, stop forcing
- * and restart auto negotiation.
*/
- if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW)) {
+ if (rxcw & E1000_RXCW_C) {
/* Enable autoneg, and unforce link up */
ew32(TXCW, mac->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 0349e2478df8..2e76f06720fd 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -199,6 +199,11 @@ static int e1000_get_settings(struct net_device *netdev,
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+ if (hw->phy.mdix == AUTO_ALL_MODES)
+ ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+ else
+ ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+
return 0;
}
@@ -241,6 +246,10 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
default:
goto err_inval;
}
+
+ /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+ adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
return 0;
err_inval:
@@ -264,6 +273,22 @@ static int e1000_set_settings(struct net_device *netdev,
return -EINVAL;
}
+ /*
+ * MDI setting is only allowed when autoneg enabled because
+ * some hardware doesn't allow MDI setting when speed or
+ * duplex is forced.
+ */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ if (hw->phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+ (ecmd->autoneg != AUTONEG_ENABLE)) {
+ e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+ return -EINVAL;
+ }
+ }
+
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
usleep_range(1000, 2000);
@@ -282,20 +307,32 @@ static int e1000_set_settings(struct net_device *netdev,
hw->fc.requested_mode = e1000_fc_default;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
+ /* calling this overrides forced MDI setting */
if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->state);
return -EINVAL;
}
}
+ /* MDI-X => 2; MDI => 1; Auto => 3 */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ /*
+ * fix up the value for auto (3 => 0) as zero is mapped
+ * internally to auto
+ */
+ if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+ hw->phy.mdix = AUTO_ALL_MODES;
+ else
+ hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+ }
+
/* reset the link */
if (netif_running(adapter->netdev)) {
e1000e_down(adapter);
e1000e_up(adapter);
- } else {
+ } else
e1000e_reset(adapter);
- }
clear_bit(__E1000_RESETTING, &adapter->state);
return 0;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 95b245310f17..46c3b1f9ff89 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -178,6 +178,24 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]);
}
+static void e1000e_dump_ps_pages(struct e1000_adapter *adapter,
+ struct e1000_buffer *bi)
+{
+ int i;
+ struct e1000_ps_page *ps_page;
+
+ for (i = 0; i < adapter->rx_ps_pages; i++) {
+ ps_page = &bi->ps_pages[i];
+
+ if (ps_page->page) {
+ pr_info("packet dump for ps_page %d:\n", i);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
+ 16, 1, page_address(ps_page->page),
+ PAGE_SIZE, true);
+ }
+ }
+}
+
/*
* e1000e_dump - Print registers, Tx-ring and Rx-ring
*/
@@ -299,10 +317,10 @@ static void e1000e_dump(struct e1000_adapter *adapter)
(unsigned long long)buffer_info->time_stamp,
buffer_info->skb, next_desc);
- if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
+ if (netif_msg_pktdata(adapter) && buffer_info->skb)
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
- 16, 1, phys_to_virt(buffer_info->dma),
- buffer_info->length, true);
+ 16, 1, buffer_info->skb->data,
+ buffer_info->skb->len, true);
}
/* Print Rx Ring Summary */
@@ -381,10 +399,8 @@ rx_ring_summary:
buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter))
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS, 16, 1,
- phys_to_virt(buffer_info->dma),
- adapter->rx_ps_bsize0, true);
+ e1000e_dump_ps_pages(adapter,
+ buffer_info);
}
}
break;
@@ -444,12 +460,12 @@ rx_ring_summary:
(unsigned long long)buffer_info->dma,
buffer_info->skb, next_desc);
- if (netif_msg_pktdata(adapter))
+ if (netif_msg_pktdata(adapter) &&
+ buffer_info->skb)
print_hex_dump(KERN_INFO, "",
DUMP_PREFIX_ADDRESS, 16,
1,
- phys_to_virt
- (buffer_info->dma),
+ buffer_info->skb->data,
adapter->rx_buffer_len,
true);
}
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index b860d4f7ea2a..fc62a3f3a5be 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -84,8 +84,9 @@ static const u16 e1000_igp_2_cable_length_table[] = {
#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
/* I82577 PHY Control 2 */
-#define I82577_PHY_CTRL2_AUTO_MDIX 0x0400
-#define I82577_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
+#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200
+#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400
+#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600
/* I82577 PHY Diagnostics Status */
#define I82577_DSTATUS_CABLE_LENGTH 0x03FC
@@ -702,6 +703,32 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
if (ret_val)
return ret_val;
+ /* Set MDI/MDIX mode */
+ ret_val = e1e_rphy(hw, I82577_PHY_CTRL_2, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
+ /*
+ * Options:
+ * 0 - Auto (default)
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ */
+ switch (hw->phy.mdix) {
+ case 1:
+ break;
+ case 2:
+ phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
+ break;
+ }
+ ret_val = e1e_wphy(hw, I82577_PHY_CTRL_2, phy_data);
+ if (ret_val)
+ return ret_val;
+
return e1000_set_master_slave_mode(hw);
}
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-16 02:17:04 +0000