diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h | 62 |
1 files changed, 58 insertions, 4 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h index e2dbc67a367b..843232bd8bbe 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h @@ -142,6 +142,7 @@ enum iwl_ucode_tlv_type { IWL_UCODE_TLV_FW_DBG_CONF = 39, IWL_UCODE_TLV_FW_DBG_TRIGGER = 40, IWL_UCODE_TLV_FW_GSCAN_CAPA = 50, + IWL_UCODE_TLV_FW_MEM_SEG = 51, }; struct iwl_ucode_tlv { @@ -245,13 +246,11 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t; /** * enum iwl_ucode_tlv_api - ucode api - * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time * longer than the passive one, which is essential for fragmented scan. * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * @IWL_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params - * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format * @IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority * instead of 3. * @IWL_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size @@ -260,12 +259,10 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t; * @NUM_IWL_UCODE_TLV_API: number of bits used */ enum iwl_ucode_tlv_api { - IWL_UCODE_TLV_API_BT_COEX_SPLIT = (__force iwl_ucode_tlv_api_t)3, IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8, IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9, IWL_UCODE_TLV_API_WIDE_CMD_HDR = (__force iwl_ucode_tlv_api_t)14, IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18, - IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20, IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY = (__force iwl_ucode_tlv_api_t)24, IWL_UCODE_TLV_API_TX_POWER_CHAIN = (__force iwl_ucode_tlv_api_t)27, @@ -318,6 +315,15 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t; * @IWL_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon * from AP and will send it upon d0i3 exit. * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2 + * @IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill + * @IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature + * thresholds reporting + * @IWL_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command + * @IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in + * regular image. + * @IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared + * memory addresses from the firmware. + * @IWL_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement * * @NUM_IWL_UCODE_TLV_CAPA: number of bits used */ @@ -351,6 +357,12 @@ enum iwl_ucode_tlv_capa { IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION = (__force iwl_ucode_tlv_capa_t)71, IWL_UCODE_TLV_CAPA_BEACON_STORING = (__force iwl_ucode_tlv_capa_t)72, IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2 = (__force iwl_ucode_tlv_capa_t)73, + IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW = (__force iwl_ucode_tlv_capa_t)74, + IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT = (__force iwl_ucode_tlv_capa_t)75, + IWL_UCODE_TLV_CAPA_CTDP_SUPPORT = (__force iwl_ucode_tlv_capa_t)76, + IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED = (__force iwl_ucode_tlv_capa_t)77, + IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG = (__force iwl_ucode_tlv_capa_t)80, + IWL_UCODE_TLV_CAPA_LQM_SUPPORT = (__force iwl_ucode_tlv_capa_t)81, NUM_IWL_UCODE_TLV_CAPA #ifdef __CHECKER__ @@ -481,6 +493,37 @@ enum iwl_fw_dbg_monitor_mode { }; /** + * enum iwl_fw_mem_seg_type - data types for dumping on error + * + * @FW_DBG_MEM_SMEM: the data type is SMEM + * @FW_DBG_MEM_DCCM_LMAC: the data type is DCCM_LMAC + * @FW_DBG_MEM_DCCM_UMAC: the data type is DCCM_UMAC + */ +enum iwl_fw_dbg_mem_seg_type { + FW_DBG_MEM_DCCM_LMAC = 0, + FW_DBG_MEM_DCCM_UMAC, + FW_DBG_MEM_SMEM, + + /* Must be last */ + FW_DBG_MEM_MAX, +}; + +/** + * struct iwl_fw_dbg_mem_seg_tlv - configures the debug data memory segments + * + * @data_type: enum %iwl_fw_mem_seg_type + * @ofs: the memory segment offset + * @len: the memory segment length, in bytes + * + * This parses IWL_UCODE_TLV_FW_MEM_SEG + */ +struct iwl_fw_dbg_mem_seg_tlv { + __le32 data_type; + __le32 ofs; + __le32 len; +} __packed; + +/** * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data * * @version: version of the TLV - currently 0 @@ -799,6 +842,12 @@ struct iwl_fw_dbg_conf_tlv { * change APs. * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can * hold. + * @max_hotlist_ssids: maximum number of entries for hotlist SSIDs. + * @max_number_epno_networks: max number of epno entries. + * @max_number_epno_networks_by_ssid: max number of epno entries if ssid is + * specified. + * @max_number_of_white_listed_ssid: max number of white listed SSIDs. + * @max_number_of_black_listed_ssid: max number of black listed SSIDs. */ struct iwl_fw_gscan_capabilities { __le32 max_scan_cache_size; @@ -809,6 +858,11 @@ struct iwl_fw_gscan_capabilities { __le32 max_hotlist_aps; __le32 max_significant_change_aps; __le32 max_bssid_history_entries; + __le32 max_hotlist_ssids; + __le32 max_number_epno_networks; + __le32 max_number_epno_networks_by_ssid; + __le32 max_number_of_white_listed_ssid; + __le32 max_number_of_black_listed_ssid; } __packed; #endif /* __iwl_fw_file_h__ */ |