diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2500usb.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2500usb.c | 194 |
1 files changed, 26 insertions, 168 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index ce75426764a1..83f2592c59de 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -277,7 +277,6 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = { }; #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -#ifdef CONFIG_RT2X00_LIB_RFKILL static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) { u16 reg; @@ -285,9 +284,6 @@ static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®); return rt2x00_get_field32(reg, MAC_CSR19_BIT7); } -#else -#define rt2500usb_rfkill_poll NULL -#endif /* CONFIG_RT2X00_LIB_RFKILL */ #ifdef CONFIG_RT2X00_LIB_LEDS static void rt2500usb_brightness_set(struct led_classdev *led_cdev, @@ -492,10 +488,6 @@ static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev, { u16 reg; - rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®); - rt2x00_set_field16(®, TXRX_CSR1_ACK_TIMEOUT, erp->ack_timeout); - rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg); - rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®); rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, !!erp->short_preamble); @@ -724,139 +716,6 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev, } /* - * NOTE: This function is directly ported from legacy driver, but - * despite it being declared it was never called. Although link tuning - * sounds like a good idea, and usually works well for the other drivers, - * it does _not_ work with rt2500usb. Enabling this function will result - * in TX capabilities only until association kicks in. Immediately - * after the successful association all TX frames will be kept in the - * hardware queue and never transmitted. - */ -#if 0 -static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u16 bbp_thresh; - u16 vgc_bound; - u16 sens; - u16 r24; - u16 r25; - u16 r61; - u16 r17_sens; - u8 r17; - u8 up_bound; - u8 low_bound; - - /* - * Read current r17 value, as well as the sensitivity values - * for the r17 register. - */ - rt2500usb_bbp_read(rt2x00dev, 17, &r17); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound); - up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER); - low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER); - - /* - * If we are not associated, we should go straight to the - * dynamic CCA tuning. - */ - if (!rt2x00dev->intf_associated) - goto dynamic_cca_tune; - - /* - * Determine the BBP tuning threshold and correctly - * set BBP 24, 25 and 61. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh); - bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61); - - if ((rssi + bbp_thresh) > 0) { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH); - } else { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW); - } - - rt2500usb_bbp_write(rt2x00dev, 24, r24); - rt2500usb_bbp_write(rt2x00dev, 25, r25); - rt2500usb_bbp_write(rt2x00dev, 61, r61); - - /* - * A too low RSSI will cause too much false CCA which will - * then corrupt the R17 tuning. To remidy this the tuning should - * be stopped (While making sure the R17 value will not exceed limits) - */ - if (rssi >= -40) { - if (r17 != 0x60) - rt2500usb_bbp_write(rt2x00dev, 17, 0x60); - return; - } - - /* - * Special big-R17 for short distance - */ - if (rssi >= -58) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (rssi >= -74) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Leave short or middle distance condition, restore r17 - * to the dynamic tuning range. - */ - low_bound = 0x32; - if (rssi < -77) - up_bound -= (-77 - rssi); - - if (up_bound < low_bound) - up_bound = low_bound; - - if (r17 > up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, up_bound); - rt2x00dev->link.vgc_level = up_bound; - return; - } - -dynamic_cca_tune: - - /* - * R17 is inside the dynamic tuning range, - * start tuning the link based on the false cca counter. - */ - if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, ++r17); - rt2x00dev->link.vgc_level = r17; - } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, --r17); - rt2x00dev->link.vgc_level = r17; - } -} -#else -#define rt2500usb_link_tuner NULL -#endif - -/* * Initialization functions. */ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) @@ -1242,8 +1101,6 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) * otherwise we might be sending out invalid data. */ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 0); - rt2x00_set_field16(®, TXRX_CSR19_TBCN, 0); rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); @@ -1291,7 +1148,7 @@ static int rt2500usb_get_tx_data_len(struct queue_entry *entry) static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, const enum data_queue_qid queue) { - u16 reg; + u16 reg, reg0; if (queue != QID_BEACON) { rt2x00usb_kick_tx_queue(rt2x00dev, queue); @@ -1302,16 +1159,19 @@ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) { rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); + reg0 = reg; rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1); /* * Beacon generation will fail initially. - * To prevent this we need to register the TXRX_CSR19 - * register several times. + * To prevent this we need to change the TXRX_CSR19 + * register several times (reg0 is the same as reg + * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0 + * and 1 in reg). */ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0); rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0); rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); } } @@ -1549,6 +1409,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2570, value, reg); + rt2x00_print_chip(rt2x00dev); if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) || rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) { @@ -1603,10 +1464,8 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) /* * Detect if this device has an hardware controlled radio. */ -#ifdef CONFIG_RT2X00_LIB_RFKILL if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -#endif /* CONFIG_RT2X00_LIB_RFKILL */ /* * Check if the BBP tuning should be disabled. @@ -1797,8 +1656,6 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, @@ -1879,7 +1736,6 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) */ __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); - __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); if (!modparam_nohwcrypt) { __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags); @@ -1902,11 +1758,13 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = { .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .configure_filter = rt2x00mac_configure_filter, + .set_tim = rt2x00mac_set_tim, .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, + .rfkill_poll = rt2x00mac_rfkill_poll, }; static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { @@ -1918,7 +1776,6 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .rfkill_poll = rt2500usb_rfkill_poll, .link_stats = rt2500usb_link_stats, .reset_tuner = rt2500usb_reset_tuner, - .link_tuner = rt2500usb_link_tuner, .write_tx_desc = rt2500usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, .write_beacon = rt2500usb_write_beacon, @@ -1964,20 +1821,21 @@ static const struct data_queue_desc rt2500usb_queue_atim = { }; static const struct rt2x00_ops rt2500usb_ops = { - .name = KBUILD_MODNAME, - .max_sta_intf = 1, - .max_ap_intf = 1, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .rx = &rt2500usb_queue_rx, - .tx = &rt2500usb_queue_tx, - .bcn = &rt2500usb_queue_bcn, - .atim = &rt2500usb_queue_atim, - .lib = &rt2500usb_rt2x00_ops, - .hw = &rt2500usb_mac80211_ops, + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 1, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = TXD_DESC_SIZE, + .rx = &rt2500usb_queue_rx, + .tx = &rt2500usb_queue_tx, + .bcn = &rt2500usb_queue_bcn, + .atim = &rt2500usb_queue_atim, + .lib = &rt2500usb_rt2x00_ops, + .hw = &rt2500usb_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2500usb_rt2x00debug, + .debugfs = &rt2500usb_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; |