summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3/gadget.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
-rw-r--r--drivers/usb/dwc3/gadget.c117
1 files changed, 88 insertions, 29 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7d1dd82a95ac..8e4a1b195e9b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -385,24 +385,66 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep)
dep->trb_pool_dma = 0;
}
+static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep);
+
+/**
+ * dwc3_gadget_start_config - Configure EP resources
+ * @dwc: pointer to our controller context structure
+ * @dep: endpoint that is being enabled
+ *
+ * The assignment of transfer resources cannot perfectly follow the
+ * data book due to the fact that the controller driver does not have
+ * all knowledge of the configuration in advance. It is given this
+ * information piecemeal by the composite gadget framework after every
+ * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
+ * programming model in this scenario can cause errors. For two
+ * reasons:
+ *
+ * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION
+ * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of
+ * multiple interfaces.
+ *
+ * 2) The databook does not mention doing more DEPXFERCFG for new
+ * endpoint on alt setting (8.1.6).
+ *
+ * The following simplified method is used instead:
+ *
+ * All hardware endpoints can be assigned a transfer resource and this
+ * setting will stay persistent until either a core reset or
+ * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and
+ * do DEPXFERCFG for every hardware endpoint as well. We are
+ * guaranteed that there are as many transfer resources as endpoints.
+ *
+ * This function is called for each endpoint when it is being enabled
+ * but is triggered only when called for EP0-out, which always happens
+ * first, and which should only happen in one of the above conditions.
+ */
static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_gadget_ep_cmd_params params;
u32 cmd;
+ int i;
+ int ret;
+
+ if (dep->number)
+ return 0;
memset(&params, 0x00, sizeof(params));
+ cmd = DWC3_DEPCMD_DEPSTARTCFG;
- if (dep->number != 1) {
- cmd = DWC3_DEPCMD_DEPSTARTCFG;
- /* XferRscIdx == 0 for ep0 and 2 for the remaining */
- if (dep->number > 1) {
- if (dwc->start_config_issued)
- return 0;
- dwc->start_config_issued = true;
- cmd |= DWC3_DEPCMD_PARAM(2);
- }
+ ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+ struct dwc3_ep *dep = dwc->eps[i];
- return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (!dep)
+ continue;
+
+ ret = dwc3_gadget_set_xfer_resource(dwc, dep);
+ if (ret)
+ return ret;
}
return 0;
@@ -421,7 +463,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
/* Burst size is only needed in SuperSpeed mode */
- if (dwc->gadget.speed == USB_SPEED_SUPER) {
+ if (dwc->gadget.speed >= USB_SPEED_SUPER) {
u32 burst = dep->endpoint.maxburst - 1;
params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
@@ -516,10 +558,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
struct dwc3_trb *trb_st_hw;
struct dwc3_trb *trb_link;
- ret = dwc3_gadget_set_xfer_resource(dwc, dep);
- if (ret)
- return ret;
-
dep->endpoint.desc = desc;
dep->comp_desc = comp_desc;
dep->type = usb_endpoint_type(desc);
@@ -530,7 +568,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
if (!usb_endpoint_xfer_isoc(desc))
- return 0;
+ goto out;
/* Link TRB for ISOC. The HWO bit is never reset */
trb_st_hw = &dep->trb_pool[0];
@@ -544,9 +582,10 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
}
+out:
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
- strlcat(dep->name, "-control", sizeof(dep->name));
+ /* don't change name */
break;
case USB_ENDPOINT_XFER_ISOC:
strlcat(dep->name, "-isoc", sizeof(dep->name));
@@ -1403,7 +1442,8 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
- if (speed == DWC3_DSTS_SUPERSPEED) {
+ if ((speed == DWC3_DSTS_SUPERSPEED) ||
+ (speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
ret = -EINVAL;
goto out;
@@ -1628,16 +1668,20 @@ static int dwc3_gadget_start(struct usb_gadget *g,
case USB_SPEED_HIGH:
reg |= DWC3_DSTS_HIGHSPEED;
break;
- case USB_SPEED_SUPER: /* FALLTHROUGH */
- case USB_SPEED_UNKNOWN: /* FALTHROUGH */
+ case USB_SPEED_SUPER_PLUS:
+ reg |= DWC3_DSTS_SUPERSPEED_PLUS;
+ break;
default:
- reg |= DWC3_DSTS_SUPERSPEED;
+ dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
+ dwc->maximum_speed);
+ /* fall through */
+ case USB_SPEED_SUPER:
+ reg |= DWC3_DCFG_SUPERSPEED;
+ break;
}
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
- dwc->start_config_issued = false;
-
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
@@ -2237,7 +2281,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
dwc3_disconnect_gadget(dwc);
- dwc->start_config_issued = false;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
@@ -2288,7 +2331,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
dwc3_stop_active_transfers(dwc);
dwc3_clear_stall_all_ep(dwc);
- dwc->start_config_issued = false;
/* Reset device address to zero */
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
@@ -2306,7 +2348,8 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
* this. Maybe it becomes part of the power saving plan.
*/
- if (speed != DWC3_DSTS_SUPERSPEED)
+ if ((speed != DWC3_DSTS_SUPERSPEED) &&
+ (speed != DWC3_DSTS_SUPERSPEED_PLUS))
return;
/*
@@ -2335,6 +2378,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dwc3_update_ram_clk_sel(dwc, speed);
switch (speed) {
+ case DWC3_DCFG_SUPERSPEED_PLUS:
+ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+ dwc->gadget.ep0->maxpacket = 512;
+ dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
+ break;
case DWC3_DCFG_SUPERSPEED:
/*
* WORKAROUND: DWC3 revisions <1.90a have an issue which
@@ -2376,8 +2424,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
/* Enable USB2 LPM Capability */
- if ((dwc->revision > DWC3_REVISION_194A)
- && (speed != DWC3_DCFG_SUPERSPEED)) {
+ if ((dwc->revision > DWC3_REVISION_194A) &&
+ (speed != DWC3_DCFG_SUPERSPEED) &&
+ (speed != DWC3_DCFG_SUPERSPEED_PLUS)) {
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg |= DWC3_DCFG_LPM_CAP;
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
@@ -2439,7 +2488,11 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
* implemented.
*/
- dwc->gadget_driver->resume(&dwc->gadget);
+ if (dwc->gadget_driver && dwc->gadget_driver->resume) {
+ spin_unlock(&dwc->lock);
+ dwc->gadget_driver->resume(&dwc->gadget);
+ spin_lock(&dwc->lock);
+ }
}
static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
@@ -2883,6 +2936,9 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
int dwc3_gadget_suspend(struct dwc3 *dwc)
{
+ if (!dwc->gadget_driver)
+ return 0;
+
if (dwc->pullups_connected) {
dwc3_gadget_disable_irq(dwc);
dwc3_gadget_run_stop(dwc, true, true);
@@ -2901,6 +2957,9 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
struct dwc3_ep *dep;
int ret;
+ if (!dwc->gadget_driver)
+ return 0;
+
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-13 21:35:24 +0000